Need help with the car charger issue ! - Sony Xperia ZL

I have Iphone car charger bought from Apple Store. It has an USB slot for extra device. When I first got my ZL, it was charged fine with this Iphone car charger . After updating my Zl to later firmware, (253 and 423), I can no longer charge it with this car charger. Does any one know how to resolve this issue ? I have tried to change many setting and avoided removing system apps that are dedicated to Connection purposes.

Related

Can't connect via USB

Suddenly I can't connect my Armetis via USB connection. I connect the USB cable, and the charging light start working (so there is a connection), but ActiveSync doesn't respond. I tried to HR the device - but problem doesn't resolve. I tried connect through another computer - nothing.
It seems that the problem is in my PDA, doesn't it? But I can charge it with the USB cable, so there is a connection.
Can someone please help me???
exactly the same here. see my thread i started a couple of days ago:
http://forum.xda-developers.com/showthread.php?t=294892
driving me mad!!
Hey mattan...
I totally agree i think it's something in the device going on. I was going to offer a list of apps i have installed to see if there's anything in common but the fact that you've done the HR implies not. Let me know if you manage to resolve!
I had the same thing twice in about 4 weeks. The store where I have bought my device has replace my P3300 each time I had this problem.
I was also using a non HTC car charger. On the last replace they also gave me an official car charger for my device because the last time the USB port dies happens when I just came out of the car and the P3300 was on the car charger.
On this new car charger I found a warning not to use this charger when starting the car.
So I think what has happened to my P3300 is that it dies when starting the car while it is already connected to the car charger. It could be that in some cases there will be a large voltage spike on the USB port which will blow up the USB port.
I have used my P3300 in the car with this car charger but I only connect it after the car has been started. Until know everything still works.
It must be a fairly common problem. HTC has a support site section dedicated to it:
http://www.europe.htc.com/support/faq.html?id=164&cat=synchronisation
have you downloaded the latest 4.5 version of activesync
Once I did that my sync hassles were solved
anebula said:
I had the same thing twice in about 4 weeks. The store where I have bought my device has replace my P3300 each time I had this problem.
I was also using a non HTC car charger. On the last replace they also gave me an official car charger for my device because the last time the USB port dies happens when I just came out of the car and the P3300 was on the car charger.
On this new car charger I found a warning not to use this charger when starting the car.
So I think what has happened to my P3300 is that it dies when starting the car while it is already connected to the car charger. It could be that in some cases there will be a large voltage spike on the USB port which will blow up the USB port.
I have used my P3300 in the car with this car charger but I only connect it after the car has been started. Until know everything still works.
Click to expand...
Click to collapse
I am afraid this what happened to me
So - there is no solution, beside replacing the phone ?
I bought it in the states, so how and where can I replace it ?
check out the thread i linked to above... do you have tcpmp installed? try deleting i if so!
chickyd said:
check out the thread i linked to above... do you have tcpmp installed? try deleting i if so!
Click to expand...
Click to collapse
I don't get you.
Can you explain to me what to do ?
I had the same problem... drove me mad.
Anyway, ended up hard resetting my orbit and active sync started working again. I slowly reinstalled all my apps and when i installed tcpmp 0.72RC1 it stopped working again. I uninstalled it and i had active sync again.
Not sure you have TCPMP installed but if so try uninstalling it.. worth a shot!

Brodit active car holder won't charge the S2

Hey guys,
I got my brodit active car holder now for a few days and it seems it doesn't supply enough juice to the S2 while in use :-(
While navigating with navigon, it even loses charge, though it's connected .... that's really disapointing, since brodit normally supplies quality products.
Anyone else got the brodit active holder with the same problems?
boba
Not got the Brodit, but I have the same problem when using CoPilot and charging via the USB cable attached to a car charger. It can keep the charge at current level with CoPilot on, but will only charge with CoPilot off.
Also noticed if SII has less than 50% charge, it won't charge at all with CoPilot on.
Taking a punt on one of these to see if it makes a difference:
http://www.buyincoins.com/details/d...-for-ipad-iphone-4g-ipod-2a-product-2748.html
Which holder do you have exactly? Can you make a photo?
Does it toggle car dock in the S2? You can see a steering wheel in notification bar.
ALexander
I was thinking exactly the same thing this lunchtime. I have the cigarete lighter active Brodit mount and - if i makes any difference - a 2004 Vauxhall Astra H. I as wondering if I would have to turn off the nice things [like satellite view, etc] on the phone for it to survive the journey. Not happy.
boba23 said:
Well I don't know the exact reason yet, but it seems the S2 doesn't accept enough juice from the charger,
Click to expand...
Click to collapse
Is the S2 in USB AC Mode?
Take a look here: Einstellungen - Telefoninfo - Status
Yesterday I modified a Brodit active car holder from the good old htc HD2 to fit the S2. Now I have fast charging (AC) and Car-Mode.
I currently own some chargers. Not the original one, well the UK Version with no use in Austria.
A 1A HTC Charger with USB socket, a 450mA noname charger with USB socket and a no name car charger with micro usb.
The car charger and the HTC charger show charging(AC) whilst the noname 450mA charger shows charging(USB)...
It would be interesting to measure the exact mA taken by the phone...
ALexander
CurrentWidget doesn't work...
ALexander
Hi all,
Okay, I've now tried four different chargers, and I've also had the phone replaced. Today, in a last attempt, I bought an official Samsung charger.
NONE of them work - even though the phone says "charging on AC" for all of them.
The only thing I haven't tried is a different car (which I'm going to do, once my neighbour gets home).
The one sensible suggestion I've read is that Samsung have screwed up somewhere in software and the phone can't draw enough juice.
Electronics is beyond my little brain, so I don't get why the GS2 charges from my netbook (even when it's only on battery) but won't charge in the car.
And I'm not talking when I'm using satnav. It won't charge at all. In fact (weirdly) it actually DISCHARGES much faster than it does if it's just sitting in my pocket.
I've logged this with my provider (Voda UK), because I refuse to get stuck with a useless phone for the next 18 months if this isn't sorted out. It's ludicrous. If I can't charge the phone in the car it's as good as useless to me.
UPDATE:
Okay, I just tried my neighbour's car (Vauxhall Astra) and the GS2 charged perfectly. 3% in four minutes. Pretty much what I get off the mains charger.
I wish I knew about electrics but I don't. Explanations will have to come from the boffins round here.
I tell you what, though. I don't really want to get a new car just to use my phone properly
Do you have any chsrger with a led?
If the led stays dark the cigarette lighgter of your car might need a new fuse.
Which car?
Sent from my GT-I9100 using XDA Premium App
Ive ordered one of these mounts and will report how it behaves in my 2008 Civic
barneypooch said:
UPDATE:
Okay, I just tried my neighbour's car (Vauxhall Astra) and the GS2 charged perfectly. 3% in four minutes. Pretty much what I get off the mains charger.
I wish I knew about electrics but I don't. Explanations will have to come from the boffins round here.
I tell you what, though. I don't really want to get a new car just to use my phone properly
Click to expand...
Click to collapse
You might be able to change to a higher amp fuse in your car fusebox.
eddablin said:
You might be able to change to a higher amp fuse in your car fusebox.
Click to expand...
Click to collapse
ROFL!! Genius!
Brodit mount arrived and looks great. Fit and design excellent and seems to charge as I would want.
Sent from my GT-I9100 using Tapatalk
So what charger do you guys advice? Which charger does charge the phone, even while navigating with Navigon?
I got the Brodit active charger (BR512...), there isn't a problem with charging at all.
I think the issue you got is really car related. My guess:
a) your cigarette lighter port is poorly wired -> Measure voltage at the port with a voltmeter, it should be at least 12V DC (Edit: Even if it does there is still the possibility that your wiring is bad, showing 12V doesn't mean it can handle the current this charger needs)
b) your cigarette lighter port doesn't make a good contact to the brodit plug. Check for corrosion of the contacts, dust, dirt, etc. Some ports go bad after lots of plug in / out cycles.
If you have no idea what I'm talking about here, I'm pretty sure every car mechanic can fix your problem for a small amount of money
Edit: it's very possible this plug works with other chargers and phones and still fails with the S2 charger. The reason for this is the different ways chargers convert the car's 12V DC into 5V DC. Some might work down to 7V input, some already **** up at 11.8V
I have the same problem with my GSII trying to charge it with my 12V Ipod adapter...
I just arrive from a short travel with my Citroën Xsara and i almost got lost cose the phone discharged all the time while using IGO on the phone...
I don't think this is car related because there are so many people with different cars having this problem... so... Samsung wants me to buy a new car to be able to use their phone in travels?
Hi guys, just thought I'd try to clear up a few of things:
1. All phones can use more power than they can draw. Note that the more apps you use, the more juice you draw depending on their features.
2. Not all CLAs are the same. Most modern devices will need 2amps, but the majority of CLAs on the market are 1 - 1.2amp units.
3. Your device will stop charging if it reaches a certain temperature, without giving you any further indication that it is too hot. This is a common scenario if you've got a phone on the dash giving guidance, with the sun rays beating a back. And yes this does mean dedicated satnav devices have a greater operational temperature range than phones, usually a 15-20 degree difference (celcius).
4. If the CLA is being tripped out due to poor isolation (a lot of cars suffer from this) it will also stop charging.
5. In general terms, the lower the battery level of the device, the more juice it pulls. This is why you may find you ha email no problems getting a small charge when you start with a battery at 85%, but your phone dies if the battery is 50% or less.
Hope that helps.
Sent from my GT-I9100 using XDA Premium App
OK, I have no idea what the problem is. I have a Brodit active charger (the cig-plug version) for my Galaxy SII. It's not charging my phone AT ALL. There is no sound, nothing displayed on my phone when I connect it. I have the charger led (blue light) on, so I know it's working.
Things I have tried so far:
1. Asked for a replacement from Brodit. Got it, no difference.
2. Tried with a different car (I have a BMW, my wife a brand new Toyota Auris) - doesn't charge it either.
3. Tried a different no-name universal charger - it works perfectly well, the phone is charging as expected. Other things like the GPS device also work fine.
4. Tried a different kernel and ROM on my phone, still no success.
Any suggestions are welcome.
LazyPawn said:
OK, I have no idea what the problem is. I have a Brodit active charger (the cig-plug version) for my Galaxy SII. It's not charging my phone AT ALL. There is no sound, nothing displayed on my phone when I connect it. I have the charger led (blue light) on, so I know it's working.
Things I have tried so far:
1. Asked for a replacement from Brodit. Got it, no difference.
2. Tried with a different car (I have a BMW, my wife a brand new Toyota Auris) - doesn't charge it either.
3. Tried a different no-name universal charger - it works perfectly well, the phone is charging as expected. Other things like the GPS device also work fine.
4. Tried a different kernel and ROM on my phone, still no success.
Any suggestions are welcome.
Click to expand...
Click to collapse
Thats strange, in the first place i thought a faulty micro-usb or charger. But you got it replaced so can't be the problem.
I have a brodit with charger too, but i use it in a different way, meaning i can remove my holder and unplug it without unplugging my charger. ( near my holder i have a small connector that i can unplug).
What i did is cutting the cable from the charger and i did put a male usb port on it ( regular male usb port) and i have a Belkin charger with a usb port, this charger deliver 1A charging current and charge my phone even when i use my navigation. ( with bluetooth and gps on).
Your phones micro-usb seems to be fine too because it charge with other brands of chargers.
Your BMW delivers enough power i guess at your cigarette lighter plug, because it doesn't charge at the Toyota either and both not delivering enough power would be coincidence.
Anyway mine works perfect the way i did it and if i can remember it worked too with my original plug attached too. ( though the original one doesn't provide enough power sometimes to keep it charged while using navigation).
The only thing i can think of is that there is some stress-pressure on your connection between phone and holder connection and that one pin isn't connected properly, with the universal charger you only plug the micro-usb plug in your phone and the micro-usb plug can adjust freely to your phones micro-usb port.
Try to wiggle a bit with your phone when in the holder and see if the power comes on. Or try to connect a little device on your holders micro-usb port ( if you have something small that charge over micro-usb) and see if that works.

No charger, no problem?

I think that this might help if someone has no charger problem (like I may have once I buy this phone):
http://omega-computer.eu/en/omega-universal-charger-kit-for-iphone-ipad-ipod-333.html
Plus many devices are chargeable via it, plus car charger, plus international plugs. I am just not sure in which parts of the world is this available.
So you really have zero USB charger adapters at the moment? I'm using the one from an iPhone, and it's working totally fine. It should work with almost literally any USB charger.
I usually have only one phone at one moment and when I sell my current phone, it's charger will also go with it so I will have 0 usb chargers.

[Q] Charger for Z1C

Hi,
I'm the owner of a new Z1C and I'm wondering if it would be harmful for the battery to charge it with a normal usb cable different from the one supplied by Sony. I can imagine it should not be an issue, but I also tried to connect a older headphones to the Z1C and a popup warned me about a "Non-Sony headphones", so... I prefer to ask to be really sure.
Can I charge the phone with a normal usb cable? Thanks in advance,
I've actually been using the cable that came with my Kindle and it works perfectly, no issues at all. It charges quickly and I don't get any errors on my phone. I've also used the cable that came with my Ipega bluetooth controller and it works as well.
I would however recommend staying away from the wall adapters they sell at CVS/Walgreens near the front, and possibly the cables too. I noticed that whenever I plugged in my phone using the wall adapter, the touch screen wouldn't function properly and acted like every time I touched the screen, even if it was to quickly swipe, that I was pressing instead. Horrible.
I also use a non-Sony charger and it works fine. As long is it is a micro-usb charger it will be fine. Headphones on the other hand are different though like you said. I tried a pair of earphones from my older Sony Ericsson X8 and it tells me it is not a supported so yea...
Since the USB specification is quite rigorous there should be no problems, except for very cheap adapters which provide an unstable voltage.
Hello @dramatictone;,
It's safe to charge it with another charger as long as the ampere of the charger is not higher than 2A. However, most aftermarket chargers are rated at 1A, which means that it'll charge slower.
It's also important to buy a quality charger with the safety marks; if you don't want to risk burning down your house while charging over night. Don't buy those generic China chargers, they're not safe to use.
I hope my answer cleared any doubts.
Have a great day,
GethPrime
Thank you very much everybody, I'm more confident now
dramatictone said:
Thank you very much everybody, I'm more confident now
Click to expand...
Click to collapse
No problem, but remember to buy a quality charger and you'll be fine. However, any MicroUSB cable will be fine for charging, even cheap China ones
GethPrime said:
No problem, but remember to buy a quality charger and you'll be fine. However, any MicroUSB cable will be fine for charging, even cheap China ones
Click to expand...
Click to collapse
Yep. I had planned to use the official Sony charger at home and the oldie Samsung Galaxy S charger (or even a microusb cable) when charging the phone at the office, but I wanted to be really sure first: I've been using the phone for three days now and I have only had to charge it just once, so I don't want to damage the battery now that I have a phone that lasts more than one day
dramatictone said:
Yep. I had planned to use the official Sony charger at home and the oldie Samsung Galaxy S charger (or even a microusb cable) when charging the phone at the office, but I wanted to be really sure first: I've been using the phone for three days now and I have only had to charge it just once, so I don't want to damage the battery now that I have a phone that lasts more than one day
Click to expand...
Click to collapse
Note that the old Samsung chargers are rated at 0,7A, so it'll take some time to charge. Other than that it'll work just fine.

new phone lose charger

I bought a brand new s7 active on ebay and I noticed some of my chargers have to be moved around to work like the port is lose was wondering if any one else had any issues I only had the phone a week and always use wireless charger I only use the cord to charge phone at work.

Categories

Resources