This is ridiculus, it was working yesterday and just before I went to sleep I put it to charge.
This morning I wake up, suddenly I see there's no red or yellow light, the phone is supposed to be charging yet there's no light, suspicious I thought.
But it could've been just this crappy USB port suddenly going loose. anyway I checked it to see if the battery was full, tried turning on - but it couldn't turn on. at all. no light whatsoever.
I tried resetting the battery 3 times, still nothing, I tried to charge it again and for a second it blinked red, a few times. so I tried turning it on while it's charging, didn't work. I could only access CWM Recovery.
And even in CWM Recovery, after pressing "reboot" it went black and returned to Recovery again.
Please, I really need help, please reply.
Phone details:
Desire HD
CyanogenMod 10.1 - Version 4.2.2
CWM Recovery
Power button doesn't work.
Help.
YagFrazier said:
This is ridiculus, it was working yesterday and just before I went to sleep I put it to charge.
This morning I wake up, suddenly I see there's no red or yellow light, the phone is supposed to be charging yet there's no light, suspicious I thought.
But it could've been just this crappy USB port suddenly going loose. anyway I checked it to see if the battery was full, tried turning on - but it couldn't turn on. at all. no light whatsoever.
I tried resetting the battery 3 times, still nothing, I tried to charge it again and for a second it blinked red, a few times. so I tried turning it on while it's charging, didn't work. I could only access CWM Recovery.
And even in CWM Recovery, after pressing "reboot" it went black and returned to Recovery again.
Please, I really need help, please reply.
Phone details:
Desire HD
CyanogenMod 10.1 - Version 4.2.2
CWM Recovery
Power button doesn't work.
Help.
Click to expand...
Click to collapse
Are you able to flash a rom? Try to power the phone on using adb commands, plug the phone into a PC and type adb reboot bootloader, and see if it goes into hboot
Sent from my Desire HD using Tapatalk 4 Beta
Related
Last week I awoke to find my G2 completely dead despite the fact that I had it plugged in all night. I plugged it into another charger and after several attempts to turn it on I still had no luck. Then I decided to do a battery pull. After putting the battery back in and plugging it back into yet another charger the amber led came on, but only for a few seconds. I repeated the process and then was able to turn on the phone when the led came on. At that point the htc boot screen showed but the phone shut back off after that. I am able to enter the boot loader, and the phone stays on, but if I try to enter recovery from that menu, it shuts off in the same way. The weirdest thing is when I try to hold the key combo to boot into recovery, the phone does 2 or 3 little vibrates then the amber led blinks.. I received a new battery from amazon today but the same problems are occurring with that one as well. Any ideas on where to go from here guys, because this is totally stumping me..? Thanks.
Hey
My phone stopped working.
A few weeks ago it suddenly didnt turn on anymore
The evening before i put it in charge coz it only had 6% left.
The next morning it didnt do anything
no led light, didnt turn on.
When i try to boot fastboot mode, the light doesnt turn on. when i put it in charger, the light doesnt turn on, my computer doesnt recognize it.
i tought lost case, its dead.
but this morning i tried to turn it on one time, it didnt work. i put it on my desk. i accidently wiped the phone off my desk, it turned on.
It showed Sony Ericsson logo, as im used to, the screen lights up very bright for a second, normaly the key lights and the led should turn on, that didnt happen.
then it went to a black screen, and turned off after a few seconds.
after that it didnt turn on anymore
Maybe the worst part: coz my father is going to buy an iPhone 5, he wants to give me his 4
is there anything i can do? I no longer have warranty.
Have you tried removing the battery, pressing power, then letting it charge for a couple of minutes, and then try to turn it on? Maybe it's really completely empty.
You had anything custom in there?
Did you use the original charger?
As I can understand, phone does not go into flashmode (while turned off, back button and connect USB cable) or fastboot mode (same thing but menu button)?
sdk16420 said:
Have you tried removing the battery, pressing power, then letting it charge for a couple of minutes, and then try to turn it on? Maybe it's really completely empty.
Click to expand...
Click to collapse
Yes. And i put the fully charged battery off my friends arc s in.
No luck
Someguyfromhell said:
You had anything custom in there?
Did you use the original charger?
As I can understand, phone does not go into flashmode (while turned off, back button and connect USB cable) or fastboot mode (same thing but menu button)?
Click to expand...
Click to collapse
It is unlocked and running x-gamer rom
It doesnt work in fastboot either flashmode
But its somehow a little working.
I got it booted up! But the screen changes in a snow-like fuzzy screen, makes a weird noice and turns off.
I think its fried, isnt it?
Sent from my sending thing..
Stupid Macbook Air can't fly
WTF it turned on and is working
But its not useable and turns off every 10 minutes :sly:
Sent from my severe damaged phone..
Motherboard severe damaged
Help
I had my arc s running on official ics. i rooted the mobile just 2 days back and i installed font installer and installed a custom font. but when i restored my original files it restored and asked for a reboot when i pressed yes the phone went black then turned on partially (sony screen>xpeia screen) then after that the phone restarts please help me with this issue im a new android user...
malith1995 said:
I had my arc s running on official ics. i rooted the mobile just 2 days back and i installed font installer and installed a custom font. but when i restored my original files it restored and asked for a reboot when i pressed yes the phone went black then turned on partially (sony screen>xpeia screen) then after that the phone restarts please help me with this issue im a new android user...
Click to expand...
Click to collapse
Repair the firmware with PC Companion, or if you wish to take the advanced way - Flashtool.
I have the SGH-T999 running the RC2 version of CM 10.1. I flashed Mako Kernel this morning to try it out and when I rebooted the phone after the flash the screen went dark. I figured there was just a reboot issue and held down the power button but nothing happened. I pulled the battery and put it back in, tried to reboot, nothing. No matter what I do the phone does not turn on now...no booting into recovery, no booting into download mode, nothing at all.
Some interesting things to note:
-When I plug the phone into an outlet WITHOUT the battery being in, the notification light turns on in a red color. When you put the battery in while it's in this state the light remains illuminated.
-I left the battery out of the phone for about 30 minutes and when I put it back in (while the phone was unplugged) the camera flash blinked very quickly.
-My GF has the same phone and all of her stuff is working fine. I tried out her battery but the phone still won't turn on (thus eliminating it being a battery issue).
I'm at a loss...I've owned several top-of-the-line Android phones and have rooted/customized them all and have never bricked anything ever. Is this phone truly done for??
strippedman said:
I have the SGH-T999 running the RC2 version of CM 10.1. I flashed Mako Kernel this morning to try it out and when I rebooted the phone after the flash the screen went dark. I figured there was just a reboot issue and held down the power button but nothing happened. I pulled the battery and put it back in, tried to reboot, nothing. No matter what I do the phone does not turn on now...no booting into recovery, no booting into download mode, nothing at all.
Some interesting things to note:
I'm at a loss...I've owned several top-of-the-line Android phones and have rooted/customized them all and have never bricked anything ever. Is this phone truly done for??
Click to expand...
Click to collapse
you flashed a kernel for the Galaxy Nexus if I'm not mistaken... You bricked, nothing wrong with the phones hardware. Jtag is your option now.
I am having troubles booting my phone after the battery depletes and the phone shuts off. My Optimus G is rooted with lifeless Rom v14 and I have TWRP recovery.
So once the phone dies, I plug it in to charge, and the phone screen automaticaly comes on and the LG logo flashes for a second, but nothing happens. The phone doesn't actually charge. If I remove the phone from the charger, the display still stays on until I hard reset it. I cannot access recovery mode or download mode for some reason. Usually when my phone dies, and I plug it in, it will flash the LG logo, keep the display on for a few seconds, and then shut down and restart and show the battery logo charging. I am not getting that this time, and I can't seem to do anything to get it operating again. There also isn't a red LED light to represent charging either. If anyone has had this issue before or knows how to fix it, I'd really appreciate the information right now.
Thanks
Mexicouger said:
I am having troubles booting my phone after the battery depletes and the phone shuts off. My Optimus G is rooted with lifeless Rom v14 and I have TWRP recovery.
So once the phone dies, I plug it in to charge, and the phone screen automaticaly comes on and the LG logo flashes for a second, but nothing happens. The phone doesn't actually charge. If I remove the phone from the charger, the display still stays on until I hard reset it. I cannot access recovery mode or download mode for some reason. Usually when my phone dies, and I plug it in, it will flash the LG logo, keep the display on for a few seconds, and then shut down and restart and show the battery logo charging. I am not getting that this time, and I can't seem to do anything to get it operating again. There also isn't a red LED light to represent charging either. If anyone has had this issue before or knows how to fix it, I'd really appreciate the information right now.
Thanks
Click to expand...
Click to collapse
That actually just happened to me too
All I did was unplug the phone, hold the power button until the screen turns off, and power up the phone. I do think the phone may need to plugged in for a bit after it does before it will boot. Hope you find a solution.
Sent from my LG-LS970 using xda app-developers app
PartimusPrime said:
That actually just happened to me too
All I did was unplug the phone, hold the power button until the screen turns off, and power up the phone. I do think the phone may need to plugged in for a bit after it does before it will boot. Hope you find a solution.
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
I had to use LGNPST and teenybin to get anywhere. I got the program all setup and after trial and error, I fixed the problem, only to be found with another problem. Now my phone doesn't seem to want to charge. It will go to the charging screen and everything, but the red pulsing LED isn't on like it used to be, and it doesn't seem like it really is charging. on TWRP, the battery percentage doesn't even show, except until recently it started showing, and then it disapears because it has no power. Any help?!
Mexicouger said:
I had to use LGNPST and teenybin to get anywhere. I got the program all setup and after trial and error, I fixed the problem, only to be found with another problem. Now my phone doesn't seem to want to charge. It will go to the charging screen and everything, but the red pulsing LED isn't on like it used to be, and it doesn't seem like it really is charging. on TWRP, the battery percentage doesn't even show, except until recently it started showing, and then it disapears because it has no power. Any help?!
Click to expand...
Click to collapse
I am now running into the same problem. Did you ever find a solution.?
Sent from my Transformer Prime TF201 using Tapatalk HD
Well this is my situation:
I bought a broken screen and broken digitalizer HTC Desire EYE with AT&T stock rom 4.4.4 lolipop
While waiting for the screen + digitalizer replacement, i decided to try ADB commands to remotelly access the cell from the PC.
When first time i turned ON the cell, it worked ok, all sounds of android OS could be heard and worked ok, and even HTC Sync showd up and i could even access the internal and external memory of the phone.
Then i tried to boot into fastboot with low battery levels, i rebooted in fastboot and my PC detected the drivers for such...
then since i was on blind cause the screen was broken, i clicked on I was supposing was recover (i needed to enter on recovery so i could run an ADB commands to activate USB debugging from recovery, so i also later have access to remote screen of the phone from the PC)
So, i clicked on blind thinking i was on recovery and after that the phone didnt charge any longer the battery or turned ON.... i connected the phone to the wall charger and not even the RED LED light of the battery turns ON anymore.
I tried all the options: 1) volume +, power
2) volume +, volume -, power
3) volume -, power (for over 20 secs) and nothing, im like lost here?
I also tried plugging the USB to the PC and that doesnt even work, nor the PC do any sound when a new device is connected, so its like the phone is completely dead.... any help is more than welcome
come on, no one? damn, im blind while waiting for the freaking chinnese screen replacemente... since i cant do crap... i started a wall charger for 4 days, lets see if this turns on at least the red light, which by the moment it doesnt... will keep updating this thread regarding the status and situation in the couple of days.
i'm having the same problem right now with my HTC desire and i just bought it in July brand new from AT&T. I was wondering if it ever turned back on for you?
csa1234 said:
Well this is my situation:
I bought a broken screen and broken digitalizer HTC Desire EYE with AT&T stock rom 4.4.4 lolipop
While waiting for the screen + digitalizer replacement, i decided to try ADB commands to remotelly access the cell from the PC.
When first time i turned ON the cell, it worked ok, all sounds of android OS could be heard and worked ok, and even HTC Sync showd up and i could even access the internal and external memory of the phone.
Then i tried to boot into fastboot with low battery levels, i rebooted in fastboot and my PC detected the drivers for such...
then since i was on blind cause the screen was broken, i clicked on I was supposing was recover (i needed to enter on recovery so i could run an ADB commands to activate USB debugging from recovery, so i also later have access to remote screen of the phone from the PC)
So, i clicked on blind thinking i was on recovery and after that the phone didnt charge any longer the battery or turned ON.... i connected the phone to the wall charger and not even the RED LED light of the battery turns ON anymore.
I tried all the options: 1) volume +, power
2) volume +, volume -, power
3) volume -, power (for over 20 secs) and nothing, im like lost here?
I also tried plugging the USB to the PC and that doesnt even work, nor the PC do any sound when a new device is connected, so its like the phone is completely dead.... any help is more than welcome
Click to expand...
Click to collapse
Was kind of in the same boat as you. Bought my EYE with a broken digitizer.. upon receiving it I found out that the phone wouldn't charge or turn on.. I had to replace the battery myself and now it works like a charm.!
Sent from my HTC Desire EYE using Tapatalk
battery replacement
Would you be able to fix mine because I've have tried everything and it still won't turn on please help
techsavi said:
Would you be able to fix mine because I've have tried everything and it still won't turn on please help
Click to expand...
Click to collapse
Check for dust or other dirt in your charging port, then use a toothpick to get it out, this fixed it for me.
Bumping because I have a similar issue and don't want to make a new thread.
My screen is fine, but the LED is off, plugging it in does nothing, and it wont turn on. Worked fine last night, it was in low power mode (on CM 14), I shut it off and plugged it in. Now, the next day, it's dead.