Hi All,
Yesterday I took my Tegra 3 (International) One X back to Stock ICS using RUU. Everything went smoothly after I relocked my bootloader and ran the RUU.
Then I proceeded to get all the OTA updates until I had JellyBean (3.14.707.24) with no further updates pending. Yay for Jellybean! The next thing I did was install CWM recovery and perform a nandroid backup (which didn't seem to restore later, although was created correctly).
At this point, I thought I would try using a CM10 rom to remove sense and I went ahead and installed it, flashing over the boot.img as one normally would, but it wouldn't boot. I later discovered that I needed a modded-boot.img (for new hboot 1.36), but not before I tried running the 3.14.707.24 RUU.
This RUU got stuck at sending.... and did not finish. I didn't leave it more than 20 minutes and tried twice. I also tried my ICS RUU to no avail.
Right now I have no Rom installed (from what I can tell), but I have full fastboot access and would like to know how I should proceed:
1) should I install the CM10 rom again with proper modded-boot.img (for hboot 1.36) and see if it boots? That would at least get me functional.
2) should I try another copy of the RUU for 3.14.707.24 JB? (i found one)
3) should I try a rom like Android Revolution HD which is OK to work with my new HBoot 1.36?
I don't want to do too much too fast since I know what I've done, and used to be really into this. The phone has been sitting a while since I upgraded my device and I'd like to get it working for travelling purposes. I'd be happy with a Stock Rom at this point...
Thanks for any willingness to help me
Adam
Ofcourse if you want CM flash the boot.img that is made for CM..And then flash .zip file..And ofcourse after flashing use
"fastboot erase cache"
Sometimes if you dont clear cache your phone won't boot..
Sent from my Endeavor
As you already said the old boot.img wont work with the new hboot. Just install cm10.1 as usually. Or any other JB Rom that is out there for the One X.
Sent from my HTC One X using xda app-developers app
Thanks for answering
big noob said:
Ofcourse if you want CM flash the boot.img that is made for CM..And then flash .zip file..And ofcourse after flashing use
"fastboot erase cache"
Sometimes if you dont clear cache your phone won't boot..
Sent from my Endeavor
Click to expand...
Click to collapse
Thank you very much for your response!
This brings me to a next question...
Marc199 said:
As you already said the old boot.img wont work with the new hboot. Just install cm10.1 as usually. Or any other JB Rom that is out there for the One X.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Thanks for your answer!! Now I'm curious if I want to use some other ROM, but without any system, how do I get the .zip file for the rom onto my SD card for flashing.
Should I use CWM recovery and enable usb storage, or is there another way?
Thanks again,
Adam
Correct, use the recovery
Yes just mount usb storage in CWM.
Sent from my ProBam by codexc @xda using xda app-developers app
Thanks!
Marc199 said:
Yes just mount usb storage in CWM.
Sent from my ProBam by codexc @xda using xda app-developers app
Click to expand...
Click to collapse
I'll try this later when I have the time. Thanks to everyone who responded. I was nervous I was on the bad road. Seems I'm in healthy shape, just lacking a rom.
Two more questions:
1) Can I still revert to stock? If so, how since RUU seems to get stuck at sending and not actually restore?
2) Any idea why when I tried to restore my stock nandroid backup just after installing CWM (which backed up successfully) it would restore but not boot (hung on One splash screen)? Should I have to wait a seriously long time for it to boot (I never used to have to?)
Thanks in advance!
Adam :angel:
THANKS!
Mr Hofs said:
Correct, use the recovery
Click to expand...
Click to collapse
Thanks so much. I'll see what happens and get back to the thread.
ALL GOOD!!
Thanks Everyone again. I'm Up and Running!
I think I was more freaked out by the RUU not working than just thinking that my phone is fine. Turned out CWM Recovery was still onboard so I just flashed a new rom using USB mounted storage. :good::good::good::cyclops:
adampollack said:
I'll try this later when I have the time. Thanks to everyone who responded. I was nervous I was on the bad road. Seems I'm in healthy shape, just lacking a rom.
Two more questions:
1) Can I still revert to stock? If so, how since RUU seems to get stuck at sending and not actually restore?
2) Any idea why when I tried to restore my stock nandroid backup just after installing CWM (which backed up successfully) it would restore but not boot (hung on One splash screen)? Should I have to wait a seriously long time for it to boot (I never used to have to?)
Thanks in advance!
Adam :angel:
Click to expand...
Click to collapse
1. You just need to find a RUU that will work..
2. Did you flash boot.img from sdcard/CWM/backup/ backup name folder?
Sent from my Endeavor
Hmmm....
big noob said:
1. You just need to find a RUU that will work..
2. Did you flash boot.img from sdcard/CWM/backup/ backup name folder?
Sent from my Endeavor
Click to expand...
Click to collapse
Hey, Thanks for responding!
1. I figured. Thanks for validating. :good:
2. I did not use the boot.img from the nandroid backup. I've never sent a separate boot.img when restoring from Nandroid. Is that something I need to do going forward/have been lucky not having to do until now? Perhaps the ICS builds of roms had a more similar boot.img?
Adam
Yes sir, always flash the corresponding boot.img file :thumbup:
Appreciate the help
Mr Hofs said:
Yes sir, always flash the corresponding boot.img file :thumbup:
Click to expand...
Click to collapse
:highfive:
Thanks! I'm just confused because I've literally NEVER had to do this and have flashed countless roms when I was on ICS builds.
Great tip :highfive::good::highfive:
Related
Hi,
if i am on CM9 and i want to restore a back up of a sense rom, will i then have to flash the corresponding fastboot.img again or will that be restored automatically?
/regards
Sent from my HTC One X using xda premium
Hapsnykel said:
Hi,
if i am on CM9 and i want to restore a back up of a sense rom, will i then have to flash the corresponding fastboot.img again or will that be restored automatically?
/regards
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
if you already have the backup then the answer is no..you do not need to flash the corresponding boot.img restored many times my custom rom which is based on sense and never needed to flash a boot.img
Wrong.
You need to flash the correct boot.img for the ROM you are using. It isn't flashed in a nandroid restore.
nobnut said:
Wrong.
You need to flash the correct boot.img for the ROM you are using. It isn't flashed in a nandroid restore.
Click to expand...
Click to collapse
then how comes i never had any problem then..flashed from Leedroid back to my old Ivysaur which i restored and did not needed to flash the boot.img
I don't know and don't really care
I didn't say it wouldn't work. I said that they should match. If the ROM chef provides a specific boot.img, you should use it... otherwise flash the stock boot.img.
Plus you have overlooked the part about nandroid being unable to flash a boot.img.
nobnut said:
I don't know and don't really care
I didn't say it wouldn't work. I said that they should match. If the ROM chef provides a specific boot.img, you should use it... otherwise flash the stock boot.img.
Click to expand...
Click to collapse
then the best thing for the OP is to try himself and he can tells us then. and always the happy delight that you are i see..and i go by what i know and tried. i restore my backup and never once had to flash a boot.img afterwards.
Those words make no sense. Maybe you could rearrange the order.
Anyway, I'm done here.
nobnut said:
Those words make no sense. Maybe you could rearrange the order.
Anyway, I'm done here.
Click to expand...
Click to collapse
Adios...Nice to see we have some happy campers here today
---------- Post added at 04:24 PM ---------- Previous post was at 04:20 PM ----------
and it is simple. he can restore his backup sense rom he has. now if he restores it and it does not bootloop then we have a winner. if he faces bootloops then he goes to thread of the rom he restored he gets the boot.img stick the phone in bootloader turn on the fastboot usb mode and flash the boot.img and job done. Nice to see we have some real happy people today here.
Tried restoring, ended up in loops - downloaded the corresponding boot.img and applied it through fastboot.
Thanks for your help.
Hapsnykel said:
Tried restoring, ended up in loops - downloaded the corresponding boot.img and applied it through fastboot.
Thanks for your help.
Click to expand...
Click to collapse
i must have a super smart phone honestly i restored a nandroid and did not had to restore the boot.img hence why i advised that in the start..anyways it was two ways and you sorted it...glad to have helped..not like some
Hapsnykel said:
Hi,
if i am on CM9 and i want to restore a back up of a sense rom, will i then have to flash the corresponding fastboot.img again or will that be restored automatically?
/regards
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Yes, you will need to. Unless you're S-OFF, recovery can't write to the boot partition. Which means when you restore your backup your boot.img won't be restored. And a Sense ROM with a cm9 kernel/ramdisk most definitely will not work. Your nandroid backup folder will contain a boot.img, you can just flash that via fastboot when you've restored the ROM.
Goku80 said:
then how comes i never had any problem then..flashed from Leedroid back to my old Ivysaur which i restored and did not needed to flash the boot.img
Click to expand...
Click to collapse
Because all of the Sense ROMs on here at the minute are all modifications of the same base, so unless the dev has done something drastic to their boot.img you shouldn't see too many problems using one with a different ROM (although you'll miss out on any tweaks specific to that ROM). So when you restored your Ivysaur, you've been using it with Leedroid's boot.img - potentially missing out on anything that Ivysaur has in the ramdisk which Leedroid doesn't, but that probably isn't enough to cause bootloops or other major issues. You need to manually restore the boot.img from the backup you made in order to use the ROM as it was intended.
Everyone happy?
nobnut said:
Those words make no sense. Maybe you could rearrange the order.
Anyway, I'm done here.
Click to expand...
Click to collapse
Did someone set fire to your Tampon? Cos' you seem a little grumpy..
I was a newbie, and i didn't take a backup from my stock rom, and i couldn't find it at all as it was "1.29.709.12" so with help of a friend of mine we managed to install ARHD 7.1.0 instead.
and after a while i decided to install CyanogenMod9 Beta1, so i toke a CWM 5.8.4.0 recovery backup and installed it and everything was fine, then i came across an unleashed cm9 v18 which has more fixes and i installed it, but the BT was not working at all, so i managed to get back to the backed up CM9 but the same problem occurred and the BT is not working at all, it doesn't even wanna change the on/off button.
so i tried to revert to the ARHD 7.1.0 and i restored it but it loops in quietly brilliant screen, i used aa super wipe patch and i installed it again and the same behavior happening, looping and looping
now the only rom that opened up is the "IceCold build 7"
please guys advice me what shall i do, every time i clear cash, I install the proper boot.img, wipe data/factory reset, and wipe cash partition. then whats wrong with my steps? why it doesn't work?
I advise you to stop fuking about and learn before you play.... its kind of like school but its more expensive.
crsnwby said:
I advise you to stop fuking about and learn before you play.... its kind of like school but its more expensive.
Click to expand...
Click to collapse
thanks for your advise, i promise i won't play again, but what about the this situation am in? any recommendations, tweaks, that can solve my problem will be really appreciated.
i need to get back to my stock or at least to be able to install a sense custom rom like the ARHD.
please guys help, please just give me any solution for this.
Relock flash ruu for phone and start again from begining this should sort your issue out
Sent from my HTC One X using xda app-developers app
dryan433 said:
Relock flash ruu for phone and start again from begining this should sort your issue out
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
the problem is that my RUU is "1.29.709.12" which is not exists at all, it looks like my phone is the only one world wide that has this RUU
is there anyway to flash another RUU without having "ERORR: 155"?
The RUU doesn't do anything special, it just wraps it up into a nice easy to use package. There must be quite a few threads and hundreds of posts explaining how to fix this.
Off the top of my head, quite possibly wrong.
Unlock.
Flash recovery
Flash boot.img
Fastboot erase cache
Superwipe
Flash Rom
Flash modules.
Relock
Search and you'll find.
im puzzled, why didnt u full wipe every restore?
After flashing boot image, did you do fast boot erase cache
Sent from my HTC One X using Tapatalk 2
So, I was relocking my HOX in order to get the OTA JB update from carrier (H3G) in order to use the new Viper ROM.
All went well and managed this. Got re rotted and installed CWM ans Super SU.
However, I read that before installing the JB Viper ROM it was important to do a full wipe. Using CWM i did this. Specifically I did the wipe data/factory reset, wipe cache partition, wipe dalvik cache and format system.
Now my phone is stuck on the white HTC screen. Please help.
Thanks
You formatted system, which basically wiped the rom. Reflash and don't format system.
Sent from something that's BETTER THAN YOURS
You should probably read what bricking your phone means.
Sent from my HTC One X
And don't forget to flash the boot.img file !
Thanks for the quick response and apologies for the basic and wrongly termed questions. Just panicking a little.
How do i get the ROM and boot.img on to the fone? Because it sticks at the white screen the pc doesn't seem to detect it.
Last time i used a stock RUU and followed that process. Will i be able to flash the new Viper ROM instead?
thanks
The boot.img is supposed to be flashed from the PC. To get the Rom into the phone you need to go back to clockworkmod, go into mounts and storage and press the mount usb thing
Edit - to flash the boot.img find a thread about fastboot. Don't worry you'll get there
To get the ROM on the phone boot into cwm and GOTO mounts & storage
Then mount USB storage
It should now be detected as a drive on your PC and you can copy the ROM back over
Sent from my HTC One X using xda app-developers app
Thanks. I did as you guys suggested and was able to install the Viper ROM (used the tweaked stock kernel as recommended in the download).
So have a ROM now but I have no service with my carrier and when I try to connect to wifi it says 'error'. Have I missed or done something wrong?
Cheers
columbo67 said:
Thanks. I did as you guys suggested and was able to install the Viper ROM (used the tweaked stock kernel as recommended in the download).
So have a ROM now but I have no service with my carrier and when I try to connect to wifi it says 'error'. Have I missed or done something wrong?
Cheers
Click to expand...
Click to collapse
While installing the rom, did you choose at the kernel question to keep the stock kernel and modules
Sent from my GT-P5110 using xda app-developers app
Mr Hofs said:
While installing the rom, did you choose at the kernel question to keep the stock kernel and modules
Sent from my GT-P5110 using xda app-developers app
Click to expand...
Click to collapse
Got it resolved. I had used the tweaked kernel and assumed that this was not standard, so when asked about which kernel i was using i said it wasn't the viper one.
So i went back to basics and used the kernel that came with the ROM zip and just flashed both. Working fine now. The only question is whether I could have used the tweaked kernel and answered yes to using the viper version?
Thanks for your help. Felt like I have learned a fair bit in the last 12 hours though!
Well if you flashed a different custom kernel you can answer that with the question so it won't load the stock modules but backs up the custom modules from the custom kernel. This way it won't mess up functionality.
When you use a boot.img without it proper modules it can mess up those things you experienced. Hope i make my self clear
Mr Hofs said:
Well if you flashed a different custom kernel you can answer that with the question so it won't load the stock modules but backs up the custom modules from the custom kernel. This way it won't mess up functionality.
When you use a boot.img without it proper modules it can mess up those things you experienced. Hope i make my self clear
Click to expand...
Click to collapse
Ye, perfectly. cheers
Looking at this thread, makes me realize that there are still a lot of polite helpful guys out there :thumbup:
Sent from my Bladed One X. Blade v5.0.0 is here. Based on RUU and with OTA.
Help, I will describe the following and any help I would love. I have the PRIMOC VM usa HTC ONE V.
Using Hasoon2000's All in one toolkit I have successfully Unlocked my phone, flashed TWRP recover 2.4.4, got root, and made a backup.
I then continue on to wipe cache and system and Factory reset to prepare to install ANY ROM. When I try to install the rom every time it just says Error in /sdcard/...[wherever rom is] (Status 1) FAILED
So then I proceed to restore my backup (this is why you always make a backup) and that works fine
Does the "(Status 1)" mean anything important?
I thought this was happening because I was running the newer radio so I used the RUU tool and now am using the good radio (not 0928) But this did not fix anything. This same thing happens over again. I have checked to make sure and I do have full root privileges.
I then tried to flash boot.img first and jmz kernel flashed successfully, but no rom will flash.
Why will NO ROM install?
I feel like I am missing something obvious but can't figure it out.
Also, whenever I do the factory restore it goes through all the process then fails when trying to wipe sd:ext , but my card is not partitioned. <I didn't know if that would be any help>
I am not a complete newb at all of this (running lg optimus for years- just new to the htc methods)
NEED Help please...
Can anyone help me out with this?
I have not made any progress since yesterday. I am successful at flashing kernels, I have flashed the boot.img of the sic kernel, but on both kernels I have no WiFi with the stock ROM.
So I either need to find the stock boot.img or have help flashing a ROM that fails everytime.
When every instruction says "Extract ROM" that is only to pull out the boot.img right, we don't flash an extracted package you flash exactly what you downloaded right?
sdxben said:
Help, I will describe the following and any help I would love. I have the PRIMOC VM usa HTC ONE V.
Using Hasoon2000's All in one toolkit I have successfully Unlocked my phone, flashed TWRP recover 2.4.4, got root, and made a backup.
I then continue on to wipe cache and system and Factory reset to prepare to install ANY ROM. When I try to install the rom every time it just says Error in /sdcard/...[wherever rom is] (Status 1) FAILED
So then I proceed to restore my backup (this is why you always make a backup) and that works fine
Does the "(Status 1)" mean anything important?
I thought this was happening because I was running the newer radio so I used the RUU tool and now am using the good radio (not 0928) But this did not fix anything. This same thing happens over again. I have checked to make sure and I do have full root privileges.
I then tried to flash boot.img first and jmz kernel flashed successfully, but no rom will flash.
Why will NO ROM install?
I feel like I am missing something obvious but can't figure it out.
Also, whenever I do the factory restore it goes through all the process then fails when trying to wipe sd:ext , but my card is not partitioned. <I didn't know if that would be any help>
I am not a complete newb at all of this (running lg optimus for years- just new to the htc methods)
Click to expand...
Click to collapse
When u flash sickkernel make sure you also install the zip through your recovery that should fix your WiFi problems and which recovery are you using ? Twrp or cwm?
Sent from my HTC One V using xda app-developers app
Obeezy562 said:
When u flash sickkernel make sure you also install the zip through your recovery that should fix your WiFi problems and which recovery are you using ? Twrp or cwm?
Sent from my HTC One V using xda app-developers app
Click to expand...
Click to collapse
Hi Obeezy562,
my advice is to use the recovery program CMW or TWRP to re-format your external SD card. Then follow the normal instrutions and install the rom from zip using your recovery program. If you still have the same issue just let me know and I'll ponder longer.
regards
mcgi5sr2 said:
Hi Obeezy562,
my advice is to use the recovery program CMW or TWRP to re-format your external SD card. Then follow the normal instrutions and install the rom from zip using your recovery program. If you still have the same issue just let me know and I'll ponder longer.
regards
Click to expand...
Click to collapse
I'm not the one with the issue is sdxben lol I was just helping him but you are correct. I also recommend people cwm.
Sent from my HTC One V using xda app-developers app
Obeezy562 said:
I'm not the one with the issue is sdxben lol I was just helping him but you are correct. I also recommend people cwm.
Sent from my HTC One V using xda app-developers app
Click to expand...
Click to collapse
Ok, so tonight I will reformat my sdcard with TWRP then try to install the ROM. I tried the CWM recovery, but it was not touch based and did not respond to the power button as the OK, only the volume rocker worked.
I will try CWM recovery if someone can provide a link to the latest one, perhaps I was using an old one.
Twrp 2.4.4 I've also had issues with flashing some roms then downgraded to Twrp 2.2.0 and everything has been well since
sentfromtx
I can add that twrp 2.4 does have some issues. I use a cwm I found on google somewhere and if works just fine.
Sent from my HTC One V
http://forum.xda-developers.com/showthread.php?t=1871243
try this one out, should set up everything fine. Let me know if you need any further help
exactly as title states.
S-offed, rooted, flashed a ROM, now I'm having trouble getting connected to VZW 4g...
EDIT - I'm restoring to my base stock nandroid. everything is force closing (GP store, everything). Dont really know what to do right now...
crazyg0od33 said:
exactly as title states.
S-offed, rooted, flashed a ROM, now I'm having trouble getting connected to VZW 4g...
EDIT - I'm restoring to my base stock nandroid. everything is force closing (GP store, everything). Dont really know what to do right now...
Click to expand...
Click to collapse
Flash a new ROM clean. Hey at least you got past soff finally. Good chance your nandroid is corrupt. Just download a new ROM and flash it. Perhaps a bad download on the other one or perhaps you have an outage near you.
Sent from my HTC6500LVW using xda app-developers app
cstrife999 said:
Flash a new ROM clean. Hey at least you got past soff finally. Good chance your nandroid is corrupt. Just download a new ROM and flash it. Perhaps a bad download on the other one or perhaps you have an outage near you.
Sent from my HTC6500LVW using xda app-developers app
Click to expand...
Click to collapse
my nandroid is fine - immediately loaded up 4g no problem. I'm now on the GPE and it's working better. may have been a bad install. May flash to an AOSP tomorrow though since it's got more customization than the GPE rom...
crazyg0od33 said:
my nandroid is fine - immediately loaded up 4g no problem. I'm now on the GPE and it's working better. may have been a bad install. May flash to an AOSP tomorrow though since it's got more customization than the GPE rom...
Click to expand...
Click to collapse
That's good to hear. Hopefully the rest of those having issues get them worked out.
Sent from my HTC6500LVW using xda app-developers app
cstrife999 said:
That's good to hear. Hopefully the rest of those having issues get them worked out.
Sent from my HTC6500LVW using xda app-developers app
Click to expand...
Click to collapse
yeah I'm flashing LiquidSmooth right now, best I've tried so far (havent tried CM 10.2 yet, may do that next) but We'll see if this one runs better for me now
crazyg0od33 said:
exactly as title states.
S-offed, rooted, flashed a ROM, now I'm having trouble getting connected to VZW 4g...
EDIT - I'm restoring to my base stock nandroid. everything is force closing (GP store, everything). Dont really know what to do right now...
Click to expand...
Click to collapse
I am having the exact same problem, except i dont have a nandroid of Stock ROM because a i bought the phone with everything done, and no nandroid of the stock system.
I am currently on a Stock rom (http://forum.xda-developers.com/showthread.php?t=2485319)
Deodexed and debloated.
But i have tried every ROM out there for the Verizon model.
Im upset about it, cuz i was so excited to get off the Gnex and on to something new,
but no 4G just sucks :\
Can someone please help?
Thanks
collinjm01 said:
I am having the exact same problem, except i dont have a nandroid of Stock ROM because a i bought the phone with everything done, and no nandroid of the stock system.
I am currently on a Stock rom (http://forum.xda-developers.com/showthread.php?t=2485319)
Deodexed and debloated.
But i have tried every ROM out there for the Verizon model.
Im upset about it, cuz i was so excited to get off the Gnex and on to something new,
but no 4G just sucks :\
Can someone please help?
Thanks
Click to expand...
Click to collapse
flash back to a sense rom, it should reset the LTE signal (did for me) and then flash another AOSP if you want an AOSP rom
crazyg0od33 said:
flash back to a sense rom, it should reset the LTE signal (did for me) and then flash another AOSP if you want an AOSP rom
Click to expand...
Click to collapse
I am on stock rom, no LTE still
I am on Vzw :\
I have run into this problem before going from sense to AOSP on the One, the Rezound also suffered from this. I have done this multiple times for both devices with 100% success, unfortunately a full wipe is required.
-Change your custom recovery to the stock recovery
-Factory reset from H-Boot, I usually do this twice
-This at least for me clears up data issues, and for some reason only factory reset from H-Boot seems to work. Custom recoveries do not clear the affected radio caches
lancasterv3 said:
I have run into this problem before going from sense to AOSP on the One, the Rezound also suffered from this. I have done this multiple times for both devices with 100% success, unfortunately a full wipe is required.
-Change your custom recovery to the stock recovery
-Factory reset from H-Boot, I usually do this twice
-This at least for me clears up data issues, and for some reason only factory reset from H-Boot seems to work. Custom recoveries do not clear the affected radio caches
Click to expand...
Click to collapse
Thats what i am unsure of, I dont know how to do this.
I have flashed a Radio RUU and custom roms on recovery on
this phone. But the phone already had all this done.
Pointing me in the right direction would be Super helpful
Thanks
collinjm01 said:
Thats what i am unsure of, I dont know how to do this.
I have flashed a Radio RUU and custom roms on recovery on
this phone. But the phone already had all this done.
Pointing me in the right direction would be Super helpful
Thanks
Click to expand...
Click to collapse
The radio RUU is just that only the Radio's, if you have received this handset with most of the work done (S-Off) I would assume it had not been factory reset from Hboot after doing this. I had read that the S-Off process could affect data and it was good practice to factory reset from Hboot after completing S-Off. All that being said I have always been on a Sense ROM when doing this, as a warning back up anything you cherish...... for this wipes **INTERNAL STORAGE!!**
Go to Zarboz's decrypted RUU
http://forum.xda-developers.com/showthread.php?t=2437436
-Download either .08 or the .10 DECRYPTED RUU
-Unzip it and find the recovery signed.img file
-Replace your custom recovery (CWM, TWRP) with the above recovery.
-Go to Settings>Power> Deselect the fast-boot option.
-Reboot into HBoot
-Select Factory Reset from the options
-Let it do its thing, when the One boots up do not worry about setting up accounts or anything because you are going to boot back into HBoot and do another factory reset, again uncheck fast-boot. I know this seems like overkill but considering you have already gone through all of this why not just wipe it again for good measure.
-Once all of this is done push your custom recovery
-Flash away and enjoy.
-Now this method will not help if you have fried your SIM card by doing a tower update (*228).
lancasterv3 said:
The radio RUU is just that only the Radio's, if you have received this handset with most of the work done (S-Off) I would assume it had not been factory reset from Hboot after doing this. I had read that the S-Off process could affect data and it was good practice to factory reset from Hboot after completing S-Off. All that being said I have always been on a Sense ROM when doing this, as a warning back up anything you cherish...... for this wipes **INTERNAL STORAGE!!**
Go to Zarboz's decrypted RUU
http://forum.xda-developers.com/showthread.php?t=2437436
-Download either .08 or the .10 DECRYPTED RUU
-Unzip it and find the recovery signed.img file
-Replace your custom recovery (CWM, TWRP) with the above recovery.
-Go to Settings>Power> Deselect the fast-boot option.
-Reboot into HBoot
-Select Factory Reset from the options
-Let it do its thing, when the One boots up do not worry about setting up accounts or anything because you are going to boot back into HBoot and do another factory reset, again uncheck fast-boot. I know this seems like overkill but considering you have already gone through all of this why not just wipe it again for good measure.
-Once all of this is done push your custom recovery
-Flash away and enjoy.
-Now this method will not help if you have fried your SIM card by doing a tower update (*228).
Click to expand...
Click to collapse
Dude you are freaking amazing!!!
Funny thing, i used Flashify to to flash the img
file and rebooted the system, it showed
a phone with a loading bar, it did its thing,
then rebooted, went into the OS and 4G
is working!
Thank you so much man!
Flashify eliminates pushing ,a great tool. If you have Flashify and also Meenova SD card reader you never have to mess with adb and fastboot again. Two great tools.
sent from my HTC One
collinjm01 said:
Dude you are freaking amazing!!!
Funny thing, i used Flashify to to flash the img
file and rebooted the system, it showed
a phone with a loading bar, it did its thing,
then rebooted, went into the OS and 4G
is working!
Thank you so much man!
Click to expand...
Click to collapse
no problem i am glad this took care of it for you.
Sent from my HTC6500LVW using Tapatalk
jbh00jh said:
Flashify eliminates pushing ,a great tool. If you have Flashify and also Meenova SD card reader you never have to mess with adv and fastboot again. Two great tools.
sent from my HTC One
Click to expand...
Click to collapse
I used flashify for it, I love that app
Sent from my HTC6500LVW using xda app-developers app