Develop Bugs

flashing new rom issue please help

okay i'm following these steps, and once i get to adb shell su cd /data/local
Code:
cd\
cd c:\AndroidSDK\Tools
adb devices (A serial number should pop up saying your phone can be seen by ADB, if so continue typing the following with hitting enter at the end of each line)
adb push flash_image /data/local
adb push mtd0.img /data/local (that is a zero, not an oh in “mt0.img”)
adb shell su cd /data/local
chmod 04755 *
/data/local/flash_image misc /data/local/mtd0.img (again that is a zero, not an oh in “mt0.img”)
it tells me permission denied... i have full root, and am able to su and get #... im stuck at this part and don't know what to do, i've searched and can't find an answer.
Please help!

Are you sure that adb push actually pushed the files?
Did you get a confirmation?

Faud said:
Im blind..one sec
Click to expand...
Click to collapse
ummm okay.....

[Q] Please help with Rage Temproot during Gfree root process

Please help, I've searched around and can't find the solution to my issue, I'm rooting following the XDA wiki for Gfree and using the Android SDK....I've managed to get the ADB to recognize my phone and I "think" that the ADB has been able to push the first 5 files to the SD....but I'm stuck on the last command line.
$ adb push su /sdcard/su
$ adb push Superuser.apk /sdcard/Superuser.apk
$ adb push rage /data/local/tmp/rage
$ adb push busybox /data/local/tmp/busybox
$ adb push root /data/local/tmp/root
$ adb shell chmod 0755 /data/local/tmp/*
when I run $ adb shell chmod 0755 /data/local/tmp/*
I get the following:
Usage: chmod <MODE> <File>
so then I go to terminal emulator on the phone and type
$ /data/local/tmp/rage
I get: /data/local/tmp/rage: not found
Where have I screwed up?

G2_Gordon_G1 said:
Please help, I've searched around and can't find the solution to my issue, I'm rooting following the XDA wiki for Gfree and using the Android SDK....I've managed to get the ADB to recognize my phone and I "think" that the ADB has been able to push the first 5 files to the SD....but I'm stuck on the last command line.
$ adb push su /sdcard/su
$ adb push Superuser.apk /sdcard/Superuser.apk
$ adb push rage /data/local/tmp/rage
$ adb push busybox /data/local/tmp/busybox
$ adb push root /data/local/tmp/root
$ adb shell chmod 0755 /data/local/tmp/*
when I run $ adb shell chmod 0755 /data/local/tmp/*
I get the following:
Usage: chmod <MODE> <File>
so then I go to terminal emulator on the phone and type
$ /data/local/tmp/rage
I get: /data/local/tmp/rage: not found
Where have I screwed up?
Click to expand...
Click to collapse
looks like you screwed up the last command ... didnt write the syntax properly thats why it showed its usage.....
(adb shell chmod 0755 /data/local/tmp/*) this command that is.....
also the last thing showing file not found means the files were never pushed to the phone..... connect your phone to your pc in chagre only and usb debigging connected mode and in command prompt in the adb folder write "adb devices"
it should show somehting like this.....
adb list of devices attached
SH034N34GF
this number over here (SH034N34GF) is an example ... it will show your phone ID... which would be different....
if you see list of devices attached and an empty line below and no serial number as shown in example....
than it means your android usb drivers for adb shell are not set up correctly
in that case ... get the drivers set up properly....
check with adb devices command to confirm your phone is recognized....
than start over with the commands

I've started over and have typed VERY CAREFULLY...
On each of the first five command prompts I get a 40 or so line message that starts with:
Android Debug Bridge version 1.0.26
.......
(list of commands)
.......
and ends with
bug tags are printed.
OK so I guess that's good
So then I type C:\> adb shell chmod 0755 /data/local/tmp/*
and NOW I get
adb server is out of date. killing...
*daemon started successfully*
Bad Mode
Clearly, I'm a noob.....
Now what?

read this guide .... on it search for .... "out of date" author explains how to tackle it
G2_Gordon_G1 said:
I've started over and have typed VERY CAREFULLY...
On each of the first five command prompts I get a 40 or so line message that starts with:
Android Debug Bridge version 1.0.26
.......
(list of commands)
.......
and ends with
bug tags are printed.
OK so I guess that's good
So then I type C:\> adb shell chmod 0755 /data/local/tmp/*
and NOW I get
adb server is out of date. killing...
*daemon started successfully*
Bad Mode
Clearly, I'm a noob.....
Now what?
Click to expand...
Click to collapse

hispeedworm said:
read this guide .... on it search for .... "out of date" author explains how to tackle it
Click to expand...
Click to collapse
In the ADB guide it says:
"By the way, the first adb command that you type may well also come up with some lines similar to "adb deamon out of date" etc, but don't worry, that's normal, just check the rest of the output."
So apparently that's not a problem?

G2_Gordon_G1 said:
In the ADB guide it says:
"By the way, the first adb command that you type may well also come up with some lines similar to "adb deamon out of date" etc, but don't worry, that's normal, just check the rest of the output."
So apparently that's not a problem?
Click to expand...
Click to collapse
im uploading my adb... its minimal with just adb fastboot and few other files.... unzip into a folder on your pc.....use these instead of the android sdk and all..
make sure that folder is linked in windows..... Step 4 of the adb for noobs guide..... reinstall the android usb drivers again following the guide.....
when thats done restart and press F8 ... disable signature verification ... when windows loaded... go to command prompt.... do into the adb directory.....than write adb devices....if it shows you device than start over with the commands.... you should not get the error saying out of date... as i just used this adb shell 2 days back to root my desire Z.....
hope this helps

Thanks! Will try again soon!

[Q] Permroot on Desire Z failed - what I do wrong?

Hello.
I've tried to root my Desire Z. I wanted to achieve only the ROOT not S-off and so on. Just to be able to use some root requiring applications like DSP Manager or Adds free.
1. So I've downloaded and installed Android SDK.
2. Started ADB
3. "adb devices" gave me the proper answer
4. Then I've copied and started psneuter and misc_vesion:
adb push psneuter /data/local/tmp
adb push misc_version /data/local/tmp
adb shell chmod 777 /data/local/tmp/psneuter
adb shell chmod 777 /data/local/tmp/misc_version
adb shell /data/local/tmp/psneuter
adb shell
/data/local/tmp/misc_version -s 1.33.405.5
exit
5. Then I've tried to root the phone:
Ive copied the required files:
adb install AndroidTerm.apk
adb push busybox /data/local/tmp/
adb push gfree /data/local/tmp/
adb push rage /data/local/tmp
adb push root /data/local/tmp/
adb shell chmod 0755 /data/local/tmp/*
adb push su /sdcard/
adb push Superuser.apk /sdcard/
And then from the Terminal Emulator I've entered
/data/local/tmp/root
I've got some messages that the everything is read only so I've tried rage first:
/data/local/tmp/rage
I've got the proper "Forked #### childs" output
and then I've tried the "/data/local/tmp/root" again. But I'm getting the "cannot fork" message.
I'm new in this stuff s please help me. What do I do wrong?
I only want the simple root access I don't want to downgrade my phone and install any custom roms.
Please help.
ps. my "compilation number" is: 1.72.405

As far as I remember your supposed to flash 1.34 Rom after changing the version number to 1.33 as the rooting is only possible via 1.34 Rom and not 1.72 Rom .... And you clearly missed that step .... Open desire z wiki and read the psneuter guide ... Follow it word for word .... You will root your phone
Maxymo123 said:
Hello.
I've tried to root my Desire Z. I wanted to achieve only the ROOT not S-off and so on. Just to be able to use some root requiring applications like DSP Manager or Adds free.
1. So I've downloaded and installed Android SDK.
2. Started ADB
3. "adb devices" gave me the proper answer
4. Then I've copied and started psneuter and misc_vesion:
adb push psneuter /data/local/tmp
adb push misc_version /data/local/tmp
adb shell chmod 777 /data/local/tmp/psneuter
adb shell chmod 777 /data/local/tmp/misc_version
adb shell /data/local/tmp/psneuter
adb shell
/data/local/tmp/misc_version -s 1.33.405.5
exit
5. Then I've tried to root the phone:
Ive copied the required files:
adb install AndroidTerm.apk
adb push busybox /data/local/tmp/
adb push gfree /data/local/tmp/
adb push rage /data/local/tmp
adb push root /data/local/tmp/
adb shell chmod 0755 /data/local/tmp/*
adb push su /sdcard/
adb push Superuser.apk /sdcard/
And then from the Terminal Emulator I've entered
/data/local/tmp/root
I've got some messages that the everything is read only so I've tried rage first:
/data/local/tmp/rage
I've got the proper "Forked #### childs" output
and then I've tried the "/data/local/tmp/root" again. But I'm getting the "cannot fork" message.
I'm new in this stuff s please help me. What do I do wrong?
I only want the simple root access I don't want to downgrade my phone and install any custom roms.
Please help.
ps. my "compilation number" is: 1.72.405
Click to expand...
Click to collapse
Sent from my HTC Vision using XDA App

Just out of curiosity, if you only want to root to use some applications and such, why don't you just temp root using visionary and just redo it whenever you restart your phone?

Thanks for the answers guys.
your supposed to flash 1.34 Rom after changing the version number to 1.33
Click to expand...
Click to collapse
hispeedworm - I don't want to downgrade my phone. I don't need it and I don't want to loose whole the settings and apps and start from the beginning just for using some special apps.
mmduluth - I've used the visionary method from this topic while it seemed the easiest one for the beginner. However after taping the "TempRoot Now!" the VISIONary+ seemed to hang. The screen was black for several minutes.
So I've decided it does not work.
Anyway, I'd prefer to have permanent root than a temp one for example for using "autostarts" - which as far as I'm concerned works AFTER rebooting the phone.

So anyone could tell me where is a mistake in what I did?

I suppose I've omitted one thing in former trials so I've tried to root it again.
After entering the Terminal Emulator I've run rage:
/data/local/tmp/rage
I've got the Forked #### childs message so everything was ok till then.
Then I've reset terminal --> menu-->reset term
And then I've run the terminal again.
I should get the # sign but what I get is the totally white screen with no possibility to write any command. It's not responding. I can only get out from it by pressing the home button.
So what's going wrong?

Maxymo123 said:
I suppose I've omitted one thing in former trials so I've tried to root it again.
After entering the Terminal Emulator I've run rage:
/data/local/tmp/rage
I've got the Forked #### childs message so everything was ok till then.
Then I've reset terminal --> menu-->reset term
And then I've run the terminal again.
I should get the # sign but what I get is the totally white screen with no possibility to write any command. It's not responding. I can only get out from it by pressing the home button.
So what's going wrong?
Click to expand...
Click to collapse
If you read enough threads/post, at the moment, the only way to gain permaroot is to downgrade your ROM. Unless, somebody finds a way to do it without the need to downgrade.
And, as I understand, using Visionary apps would cause damage to your device. Be careful!
Cheers...

Thank you silverwind. Now it's clear.
So anyone is working on this?
Cheers

[Q] Rooting AT&T S3

So I am trying to manually root my S3 without flashing a rom. I am able to get through most of the steps in these instructions up to the point where it requires you to put phone into download mode. I get phone into download mode, but when I connect to the PC, it doesn't see the phone.
This step worked:
To confirm your device is properly detected, in the command prompt, run
Code:
adb devices
Now copy busybox, su, superuser.apk to /data/local/tmp/ using adb.
Code:
adb push busybox /data/local/tmp adb push su /data/local/tmp adb push Superuser.apk /data/local/tmp
These steps worked:
Now run adb shell
Code:
adb shell
Note that you see a "$" sign in the command prompt. That means you are not rooted.
Next run the following commands in the shell to change permissions and get some limited privileges for the Superuser files:
Code:
chmod 6755 /data/local/tmp/su chmod 755 /data/local/tmp/busybox chmod 644 /data/local/tmp/Superuser.apk
Note that the names of the files are case sensitive.
Files are there and are verified when I ls /data/local/tmp. All three files are there.
This is where I have a stumbling block:
Once in download mode, connect the Android device using the microusb cable to the computer.
Now using the open Nautilus window, navigate to /UserData/local/tmp/ folder and verify that you have the files you sent to the device viz. su, busybox and Superuser.apk
So if I am able to push files to the phone, why won't it recognize it when in download mode?
Using Fedora Linux and have the full Android SDK installed.

[HOWTO] (Manually) Rooting the Kindle Fire 2 with a Mac

Firstly, Merry Christmas!
Note: This worked on version 10.2.4
I received a Kindle Fire 2 today and since then I've been trying to get it rooted, now that I have I though I'd share it here for other people who might be in the same situation.
This is really just a remixing of the tool made by Bin4ry (http://forum.xda-developers.com/show....php?t=1886460) but I couldn't get the script to run on my Mac...
Step 0 - Preparing
You must enable ADB and Unknown App sources from Settings.
Settings > More > Security > Enable ADB
Settings > More > Device > Allow Installation of Applications
Step 1 is to get that tool from here. and extract it somewhere you'll remember.
Step 2 (you can skip this if you already have the android SDK platform-tools in your PATH)
If you don't have the android SDK or adb installed just add the 'stuff' folder from the tool to your path.
In terminal run
Code:
export PATH=$PATH:/path/to/extracted/tool/stuff/
Step 3 - Push the required files
It's probably easiest if you change into the stuff folder first...
Code:
cd /Users/x/Downloads/Root_with_Restore_by_Bin4ry_v18.7z\ Folder/stuff
Then run the following...
Code:
adb push busybox /data/local/tmp/.
adb push su /data/local/tmp/.
adb push Superuser.apk /data/local/tmp/.
adb push ric /data/local/tmp/ric
Then you need to run an adb shell to set some permissions
Code:
adb shell
(you should get a prompt like [email protected]:/)
Run
Code:
chmod 755 /data/local/tmp/busybox
exit
Step 4 - Rooting
This requires another terminal window. Check that you can run adb from there as well (running adb should print the usage information)
In the first window run:
Code:
adb shell "while ! ln -s /data/local.prop /data/data/com.android.settings/a/file99; do :; done" > /dev/null
In the other run
Code:
adb restore fakebackup.ab
You should get a prompt on your Kindle, hit the restore my data button. As you do so the command in the first window should stop (or a few seconds later - if it doesn't stop it and re-run both commands again.)
You can now close the second window!
Run
Code:
adb reboot
, your Kindle should reboot though the screen will be blinking repeatedly (flashing between the lockscreen and the boot animation) don't worry about that as it will be fixed in a sec.
Step 5 - Cleaning Up
Run
Code:
adb shell
If all was successful you should see the prompt change to [email protected]:/
If it did, continue otherwise go back to step 4.
Run these
Code:
/data/local/tmp/busybox mount -o remount,rw /system
/data/local/tmp/busybox mv /data/local/tmp/su /system/xbin/su
/data/local/tmp/busybox mv /data/local/tmp/ric /system/bin/ric
chmod 755 /system/bin/ric
/data/local/tmp/busybox mv /data/local/tmp/su /system/xbin/su
/data/local/tmp/busybox mv /data/local/tmp/Superuser.apk /system/app/Superuser.apk
/data/local/tmp/busybox cp /data/local/tmp/busybox /system/xbin/busybox
chown 0.0 /system/xbin/su && chmod 06755 /system/xbin/su
chmod 655 /system/app/Superuser.apk
chmod 755 /system/xbin/busybox
rm /data/local.prop
reboot
Your Kindle will restart and SuperSU will be available under Apps, your now free to do as you please, though you could follow with Step 3 on this thread to get Google Apps etc working.
Update: a short guide to installing the Play store can be found here.

This worked almost perfect for me but I couldn't get it to run adb commands from the stuff folder so I dumped its contents (minus the adb stuff) into the platform-tools in the android SDK and from then on everything went great. Thanks so much.

didthis work for 10.2.4 users out there
does this work for 10.2.4

worked!
Great work, congratulations and thanks! I'd like to make some comments tho regarding some typos and suggestions.
1.- I'd suggest to install the android SDK as, in fact, adb commands didn't work from the stuff folder. Add a line to .bash_profile with the export PATH command to make permanent access to the adb shell.
2.- Push files from the Root_with_Restore_by_Bin4ry_v18 folder, not the .7z file.
3.- The command is, e.g., adb push busybox /data/local/tmp/ instead of adb push busybox /data/local/tmp/.
4.- In Step 5 the command /data/local/tmp/busybox mv /data/local/tmp/su /system/xbin/su is twice so you'll get an error the second time you execute it.
Also congratulations for instructions on how to install PlayStore - here pay attention to the names playstore.apk and servicesframework.apk which in fact are plstore3.10.10.apk and GoogleServicesFramework.apk respectively -
Once again thanks for your work.

gorganzolia said:
does this work for 10.2.4
Click to expand...
Click to collapse
Yes this worked for 10.2.4

10.2.6
Does this work with 10.2.6?

it worked
Tried it this morning on 10.2.6 and it worked woohoo now how do you stop it from automatically updating
Found out how to stop those automatic updates here http://forum.xda-developers.com/showthread.php?t=2086450