AirPlay for Anroid is finally here! - Sony Xperia ZL

I had been looking for this for a long time, and all I could find before were AirPlay receivers for Android.
Today I searched again and was pleasantly surprised to find at least 3 on the play store! All three require root access, but out of all three only one of them worked on my ZL running an experimental build of PAC ROM. It's called AOA and it works like a charm:
https://play.google.com/store/apps/details?id=com.nav.aoaservice
AirAudio is supposed to work with CM10.1 but I found it was choppy and crappy with my current kernel. AirAudio installed a service and there are warnings about the phone not booting when the module is installed.
AOA was actually a lot easier to get running, no service installed and it's also cheaper than AirAudio ($2.99 vs $6.99). Check it out if you've always wanted a way to stream music to your AirPlay enabled receivers.
Once running it will stream ALL audio from your device, so you can stream from any app that can play audio. You do have to turn it off to be able to use your headphones or A2DP streaming, but it's a nice start. It would be nice if Spotify and other developers would implement this into their apps to have better control, but this is awesome.
I had been using a Bluetooth receiver for a while but while it works well, I always had to stay nearby to avoid choppy audio. WiFi is much better for streaming music.

You can try the Zappo's solutions.
I used it with AppleTV, Samsung TV and LG TV, it works as very well and can share almost all the content in my phone.

Related

Controlling music playback on my home stereo (Bluetooth or Wifi solutions)

Hi all,
I'm thinking about buying a cheap Bluetooth audio receiver to hook up to my home stereo. I'd like to be able to play music files on my Nexus and have them play on my stereo via Bluetooth but I'm concerned about range.
Is the Nexus Bluetooth class 1, 2, or 3? I'd like to be able to queue up music from anywhere in my house, but typically Bluetooth range is pathetic.
Wifi would be a great option for good range, but I know of no Wifi audio receivers except Apple Airport, and that only works with specific apps. (I'd like all Android OS audio to be transmitted to the receiver).
Another option I suppose would to be to buy a media player box running something like XBMC, and just use the Nexus as an XBMC remote control. but this seems like an expensive option just to play music.
Bluetooth range is good, but not the best I have seen.
I use mine as a telemetry display for a Quadcopter.
(https://play.google.com/store/apps/details?id=com.ezio.multiwii)
If I fly down the street, I loose connection sooner than I did with my Archos 80 9G (Which was a pretty lousy tablet in most other ways), but the N7 (2013) has better range than other devices I have tried.
The play store states that it has Bluetooth 4.0:
https://play.google.com/store/devices/details?id=nexus_7_16gb_2013
scroll to Technical specifications
Thanks for the reply. Does your telemetry app only receive telemetry from the copter? Or can it also transmit to copter (control). I'm concerned with the transmit power, not it's receive sensitivity.
Bluetooth 4.0 indicates the version number but not the class. It's the class number that details the forward power of the transmitter. I can't find that spec anywhere.
Obveron said:
Thanks for the reply. Does your telemetry app only receive telemetry from the copter? Or can it also transmit to copter (control). I'm concerned with the transmit power, not it's receive sensitivity.
Bluetooth 4.0 indicates the version number but not the class. It's the class number that details the forward power of the transmitter. I can't find that spec anywhere.
Click to expand...
Click to collapse
The Nexus 7 is a Bluetooth class 2 device. Class 2 Bluetooth, as I'm sure you know, has a range of ~10 meters, or ~30 feet.
EDIT:
Hold on, don't quote me on the class. I'm pretty sure, but can't find a reliable source.
Johmama said:
The Nexus 7 is a Bluetooth class 2 device. Class 2 Bluetooth, as I'm sure you know, has a range of ~10 meters, or ~30 feet.
EDIT:
Hold on, don't quote me on the class. I'm pretty sure, but can't find a reliable source.
Click to expand...
Click to collapse
Thanks for the reply Johmama. I also can't find on a source on that, but I agree Class 2 is good bet. Alas, that's not enough range for my purposes. Looks like I'll be looking for another solution.
Does anyone have any suggestions?
If the Nexus is generating the audio and streaming it to a receiver, the only thing I know that can do that over Wifi is Apple Airport or Google Chromecast, both are limited to working on specific apps (unlike bluetooth audio that is intergrated into the system audio driver).
If the nexus is merely acting as a Wifi remote control to a set top box playing music, I'd need the nexus to be able to view and manage the library, and playlist. I think XBMC remote can do this.
I also think there are tablet remotes for WDTV live. Although I don't think you can manage the library from the tablet.
BTW my music library is on my NAS, accessible through SMB shares.
There are a bazillion plugins for android for most media players/suites from VLC to Windows Media centre to XBMC to spotify etc. just check whether there's one that works with whatever software you're running.
I've also done the bluetooth streaming to PC trick before but found it an inferior solution as I can hold a much larger music library on the PC, and for some reason I couldn't get it to auto pair, had to manually connect each time. Since I can run any choice of media player + spotify on the loungeroom PC it was a no brainer, I much prefer the nexus as a remote control than actually the one doing the streaming (also saves battery). Finally using it as a remote means you can setup the same solution from your phone, partner's devices etc.
Just get a cheap bluetooth dongle and enjoy. I destroyed the headphone jack in my razr maxx hd and use bluetooth exclusively for any audio connections.
yeah, you're limited to about 30ft, but so what? If ya gotta be 30+ft from the stereo, you're likely doing something that won't have you interacting with the tablet anyway.
if worse comes to worse, use a cat-5 audio extender balun and add jacks in your house for the bluetooth dongle.
either that or buy an old WDTV box, use its optical digital audio output and remotely control it from the web interface (after installing WDlxTV firmware)
that stupid little $79 box is the greatest piece of home entertainment hardware I've ever purchased. not only can it stream 1080p over my network, but it also downloads and seeds torrents, runs a fileserver and SSH remote access so I can tap into it anywhere on the freakin planet (provided I have a decent internet connection at the other end)
You've got a problem? there is ALWAYS some hackable embedded linux device that can provide a cheap solution.
Thanks for the replies. 30ft bluetooth range is not enough. I have my audio system powering speakers all over the house and backyard.
wintermute000 said:
There are a bazillion plugins for android for most media players/suites from VLC to Windows Media centre to XBMC to spotify etc. just check whether there's one that works with whatever software you're running.
I've also done the bluetooth streaming to PC trick before but found it an inferior solution as I can hold a much larger music library on the PC, and for some reason I couldn't get it to auto pair, had to manually connect each time. Since I can run any choice of media player + spotify on the loungeroom PC it was a no brainer, I much prefer the nexus as a remote control than actually the one doing the streaming (also saves battery). Finally using it as a remote means you can setup the same solution from your phone, partner's devices etc.
Click to expand...
Click to collapse
Hi wintermute000, thanks for the suggestion. I currently don't have a HTPC hooked up to my home stereo, but that might be my best option. Do any music players for PC allow complete library browsing completely from their associated apps, or do the remotes only control playback?
I was hoping to attach a cheap box like wdtv or something that could access my music on the SMB shares on my NAS, While using an Android remote control for that device that can browse and queue songs from the library on the NAS. I've read that the XBMC remote app has the ability to browse the library, but I've heard its library browsing is buggy and I don't know if the app will see my SMB shares on the NAS.
Cheapxj said:
either that or buy an old WDTV box, use its optical digital audio output and remotely control it from the web interface (after installing WDlxTV firmware)
Click to expand...
Click to collapse
Cheapxj, I did some digging and discovered that the smartphone app for WDTV cannot navigate through my music library (stored on my NAS). It can control playback but I can't browse and queue songs and albums directly from the app (needs the help of the TV).
Is this also the case with the WDLxTV firmware. and the web interface?
Obveron said:
Thanks for the replies. 30ft bluetooth range is not enough. I have my audio system powering speakers all over the house and backyard.
Hi wintermute000, thanks for the suggestion. I currently don't have a HTPC hooked up to my home stereo, but that might be my best option. Do any music players for PC allow complete library browsing completely from their associated apps, or do the remotes only control playback?
I was hoping to attach a cheap box like wdtv or something that could access my music on the SMB shares on my NAS, While using an Android remote control for that device that can browse and queue songs from the library on the NAS. I've read that the XBMC remote app has the ability to browse the library, but I've heard its library browsing is buggy and I don't know if the app will see my SMB shares on the NAS.
Cheapxj, I did some digging and discovered that the smartphone app for WDTV cannot navigate through my music library (stored on my NAS). It can control playback but I can't browse and queue songs and albums directly from the app (needs the help of the TV).
Is this also the case with the WDLxTV firmware. and the web interface?
Click to expand...
Click to collapse
I've run the itunes plugin for mediamonkey and it behaves exactly like itunes including library.
Spotimote lets me browse my spotify playlists normally too.
finally there is always itunes

[Q] Miracast on Tab S 8.4

Ive seen so many mixed report regarding Miracast. I really like the idea but am cautious. From what i understand Netgears Push 2 TV PTV3000 is considered one of the better dongles. Anyone got any recommendations or are currently using Miracast on thier Tab S? Not entirely sure if it is even compatible. Would appreciate any feedback on your experiences and any recommendations.
I've got it. I use it. It works.
I got it when I had my Surface 2, I've continued using it with this Tab. Connects perfectly. Only thing I've noticed is that after watching a few HD YouTube videos, the sound goes out of sync with the video. I've yet to fully investigate this phenomenon, whether it be the YouTube app, the Tab, background apps etc. but can't see it been anything to do with the Netgear. I'm off on holiday now so won't be able to look into that for another week.
P.S. not sure if you could use Chromecast in the same way, but if so it would be a cheaper option.
SteveYorks said:
I've got it. I use it. It works.
I got it when I had my Surface 2, I've continued using it with this Tab. Connects perfectly. Only thing I've noticed is that after watching a few HD YouTube videos, the sound goes out of sync with the video. I've yet to fully investigate this phenomenon, whether it be the YouTube app, the Tab, background apps etc. but can't see it been anything to do with the Netgear. I'm off on holiday now so won't be able to look into that for another week.
P.S. not sure if you could use Chromecast in the same way, but if so it would be a cheaper option.
Click to expand...
Click to collapse
Many thanks for your reply, did you root your Tab S?
No. And it's the 10.5
My DLink Miracast adapter works perfect with the Tab S 8.4. Remember to update the firmware after you get the adapter home. Else it'll lag like hell. After the update it works like a charm.
And Tab isn't rooted.
geoux said:
My DLink Miracast adapter works perfect with the Tab S 8.4. Remember to update the firmware after you get the adapter home. Else it'll lag like hell. After the update it works like a charm.
And Tab isn't rooted.
Click to expand...
Click to collapse
Update:
After the recent Tab S firmware update, it simply stopped working. Samsung, what did you do?
Update:
After a firmware update of the Miracast dongle, it started working again. Darn.
Ah, glad it's not just me then. I tried casting to the tv the other day (I'd just rooted the day before that) and I got an incompatible hardware issue or something, thought I'd broken something. I might have had an update in the background and it's ****ed it.
I'm using the Netgear PTV3000.
possible solution
geoux said:
Update:
After the recent Tab S firmware update, it simply stopped working. Samsung, what did you do?
Click to expand...
Click to collapse
please see below...i know u say that you're not rooted but if u are using custom kernel or recovery then this pertains to u too
SteveYorks said:
Ah, glad it's not just me then. I tried casting to the tv the other day (I'd just rooted the day before that) and I got an incompatible hardware issue or something, thought I'd broken something. I might have had an update in the background and it's ****ed it.
I'm using the Netgear PTV3000.
Click to expand...
Click to collapse
if u are using cw/twrp/philz recovery and/or the sky high kernel then the custom images have broken your wifi...u can either install my SuperSamung V2 rom with the fix already included or edit your build prop by adding the line wlan.wfd.hdcp=disable then save & reboot
Sorry to revive an old thread, but i'm considering getting a Miracast dongle to feed powerpoint presentations to an office projector from my Tab S. Couple questions though:
1. Will it work?
2. Am I better off going the wired micro-usb-to-hdmi route?
I'd really rather go wireless so I can walk around and not worry about yanking the cable off in the middle of a meeting with top execs.
Why miracast instead chromecast? Chromecast works perfectly from the tablet or pc and has better support.
I just see miracast as a poor mans version of chromecast.
I'm also wondering about this.
For screen monitoring of e.g. games, photo viewing with Gallery of QuickPix, or tv streaming using an app provided by my cable company
I understood Chromecast is supposed to be especially good at showing content in the cloud. I forgot the exact list of supported services... Things like YouTube, picasa, Spotify, radio streams, Netflix? In this case, your tablet "refers" to the content, and chromecast does the actual downloading/streaming. Screen mirroring was added as an afterthought, and last I checked (hmm, 6 months ago) subject to a lot of disclaimers, supported only on some devices.
I understood Miracast is true screen mirroring, but the few receiver devices I looked at, mention technical limits, like (example) 15fps, which makes me doubt their use for video mirroring.
Thus I haven't bought anything yet :-\
More testimonies of miracast & Chromecast users could be interesting!
screen mirroring works fine with chromecast as long as you are not doing something effected by input/screen lag. Watching video from an app that is not natively supporting chromecasting (showbox...) is relatively simple. If you are on this forum you shoild have the ability to do it, just maybe not someone who can only facebook on their tab might have small issues. Casting pictures, slides, presentations or websites is fine too since there is no need to worry about the lag.
Gaming is annother story if you the person playing os wanting to use the tv screen then you have to pick a game with care. Any game that requires good to impossible timing (flappy anything or one finger death punch) is a great way for a masochist to have fun with out a sadist being in the room. Games that do not need fast timing like turn based strategy games or certain types of puzzle games are fine and work great. Even quite a few emulators work well like this but with the same game choice restrictions.
The screen lag you get is not anything like low fps it is input lag from the time difference it would take to simply send the information to your tablet vs the time it takes to send the information to your router and the router to send the information to the chromecast. I would assume miracast would suffer frome the same issues, though I haven't tried it yet.
acdbrn2000 said:
screen mirroring works fine with chromecast as long as you are not doing something effected by input/screen lag. Watching video from an app that is not natively supporting chromecasting (showbox...) is relatively simple.
Click to expand...
Click to collapse
Interesting.
Is both screen + audio sent to the Chromecast then? Or are there audio/video sync issues... If video happens on tv but lags behind the video+audio of the tablet...
The audio went out of the tv when I did a cast using cast screen. Most of the casting I do from my device uses uPnPlay a wonderful free app that is as good as most if not all the paid upnp apps (bubble upnp/ allcast). I have never had any issues with audio desync using that app.
when I did a sceen cast with show box I did have a streaming hicup (a slight stutter) once or twice but that may have been due to my old router (wrt54g) and not so much the chromecast.
fred_be9300 said:
Interesting.
Is both screen + audio sent to the Chromecast then? Or are there audio/video sync issues... If video happens on tv but lags behind the video+audio of the tablet...
Click to expand...
Click to collapse
Never had any sync issues casting with chromecast.
In most situations you would never have to screen cast as chromecast can pretty much cast anything web or local natively.
Presentations is really the only use I can see for screen casting.
ashyx said:
In most situations you would never have to screen cast as chromecast can pretty much cast anything web or local natively. Presentations is really the only use I can see for screen casting.
Click to expand...
Click to collapse
as I mentioned earlier, my TV cable provider, has an app that streams live TV. We have a 2nd TV in the bedroom for which we don't have a decoder box, but I hope I could screenmirror the TV stream that I can get through the App (audio&video).
fred_be9300 said:
as I mentioned earlier, my TV cable provider, has an app that streams live TV. We have a 2nd TV in the bedroom for which we don't have a decoder box, but I hope I could screenmirror the TV stream that I can get through the App (audio&video).
Click to expand...
Click to collapse
It should work fine for that then. You may get the occasional hiccup depending on many things but for the most part I do not see any reason why it would not work for you.
fred_be9300 said:
Interesting.
Is both screen + audio sent to the Chromecast then? Or are there audio/video sync issues... If video happens on tv but lags behind the video+audio of the tablet...
Click to expand...
Click to collapse
So I caved and bought an Chromecast (CC)
Findings:
- screencast works fine most of the time. Transfers audio and video, and keeps good sync. But some applications cause a crash and reboot of the tablet (e.g. mirroring of MX Player playing a video)
- casting youtube works fine.
- the app I was most interested in (a TV streaming app of my local TV cable company) in fact does both Chromecasting, and works in screen casting mode. Hurray)
- good wifi reception is needed on both the tablet and the CC
and a general point
- according to reading around, it's not possible to use the CC without active internet connection, not even for local screencasting. Technically, it seems unnecessary to have an active internet connection on the WLAN that connects both the CC and the tablet (or pc), for local casting or screencasting. Read more at e.g. https://productforums.google.com/forum/#!topic/chromecast/XRktmNTk0QY
Sorry to take the thread off-topic from Miracast - but I think it's interesting to hear testimonies of both Chromecast and Miracast, to compare
regards

[Q] AFTV as bluetooth audio receiver/speaker

Hi!
Is it possible to use the (unrooted) AFTV as a Bluetooth Audio Speaker?
I want to connect my Smartphone, to play my music on my home cinema System, which is plugged into the AFTV.
Thanks in advance
ChelseaSmile
ChelseaSmile said:
Hi!
Is it possible to use the (unrooted) AFTV as a Bluetooth Audio Speaker?
I want to connect my Smartphone, to play my music on my home cinema System, which is plugged into the AFTV.
Thanks in advance
ChelseaSmile
Click to expand...
Click to collapse
it's easier to use bubbleupnp or some other UPnP through XBMC. Right now Bluetooth audio is not working very well on the firetv.
I would be very interested in the same solution as well. My Fire TV is hooked up to my stereo as well. The huge disadvantage of UPnP is, that it is not as easy to use as bluetooth. Often I'm having friends over and we play music from different sources such as Spotify, Youtube, streams from websites etc. With bluetooth I can just connect my tablet and everything is working.
puregenius said:
I would be very interested in the same solution as well. My Fire TV is hooked up to my stereo as well. The huge disadvantage of UPnP is, that it is not as easy to use as bluetooth. Often I'm having friends over and we play music from different sources such as Spotify, Youtube, streams from websites etc. With bluetooth I can just connect my tablet and everything is working.
Click to expand...
Click to collapse
Dito!
That's exactly the reason why I explicitely asked for bluetooth support and not for streaming in general. Anyone here with a more useful idea?
@t3ch42: You wrote "...Bluetooth audio is not working very well ...". So can you please tell me how to setup this "not working very well" configuration? I think it would be better than nothing.
ChelseaSmile said:
Dito!
That's exactly the reason why I explicitely asked for bluetooth support and not for streaming in general. Anyone here with a more useful idea?
@t3ch42: You wrote "...Bluetooth audio is not working very well ...". So can you please tell me how to setup this "not working very well" configuration? I think it would be better than nothing.
Click to expand...
Click to collapse
Wow could you be more of a **** about it.
To elaborate a little more, to setup the not working well config, you would use a bluetooth receiver and use an android settings apk sideloaded and connect. None of the bluerooth devices so far that need a code to connect will connect yet. But with a standard bluetooth reciever, you get a lag. Somewhere between 3/10 and 4/10 of a second usually. But thats not what you're after is it?
As far as using the firetv as a bt receiver; not supported. I would hope that this is not the case forever. I'd love to use my phone or the firerv as a bt receiver too. But the particular protocol is not supported right now.
So you see, bluetooth audio is not working very well. And not at all in the manner in which you inquired about. So, for streaming using bt, i'd suggest going to amazon and purchasing a bt receiver for about 7dollars delivered.
Since you don't seem to want to use upnp, that's your best option.
atfv bluetooth problem
hi all this is what I've notice installed new update bluetooth headset was working fine i then zero cache aftv now 1 sec delay
couldn't find a fix so factory reset aftv setup bluetooth again now working
zero cached again now delay back again
so all with this problem have you zero cache your aftv I'm not gonna reset as I've to many add ons to try and remember to install
if someone could look into that side and maybe find a fix

Chromecast Audio

I tried looking up this device on xda, but nothing yet, so i thought i'd post here first.
since it uses an audio jack, do you guys think you could plug this into your cars aux port, and stream using your phone? or is it dependent on wifi only?
It is wifi, not bluetooth. Might work in guest mode. I'm very interested in the device, but want to use if for DLNA streaming from my home server if at all possible.
Hi,
It also has dual output connector: analog 3.5 jack and optical spdif... equal to Apple Airport Express.
Anybody see if it has native FLAC support? I haven't found an answer to that yet. This may be a device I just have to buy and try...
Note10.1Dude said:
Anybody see if it has native FLAC support? I haven't found an answer to that yet. This may be a device I just have to buy and try...
Click to expand...
Click to collapse
Yeah I'm still waiting for an answer as to if it supports 320kbps for high quality streaming from spotify. That would be the main advantage of it over a bluetooth receiver.
I'd love to know if it does support that if anyone can find out!
FLAC is listed as supported media for google cast, so it SHOULD work.
https://developers.google.com/cast/docs/media
does anybody have any idea if Chromecast Audio would work as a car audio solution? I tried using a 1st Gen Chromecast but ran into the issue of the device's requiring an actual internet connection (not simply a wifi connection). My guess is that Chromecast Audio will similarly require an internet connection, but am wondering if there is a workaround?
mcnoggin said:
does anybody have any idea if Chromecast Audio would work as a car audio solution? I tried using a 1st Gen Chromecast but ran into the issue of the device's requiring an actual internet connection (not simply a wifi connection). My guess is that Chromecast Audio will similarly require an internet connection, but am wondering if there is a workaround?
Click to expand...
Click to collapse
A lot of talk, no conclusion about this yet. Some suggest tethering the phone should work. I've got one on order, should know next week.
cool, let us know! =]
I am working on getting mine to work in my car today. I bought it yesterday and didn't have much time to mess with it. I had it working as I tethered through my phone and using my gfs phone to play music but I'm going to see if I can get it to work without tether.
Got it working but not perfect
So the main thing is IT WORKS!!
Its just buggy getting it started but after that it plays fine for the whole ride. Here is what I did (notice: must have working tether on your phone to get it to work)
I am running a nexus 6 with Chroma ROM. Also I'm using Spotify to play my music.
Steps I did to try to get it working.
1. I first went through the setup process on my gf galaxy s5 and updated the chromecast through my tether.
2. I hooked everything up in my car.
3. Turned on my phones WiFi and press the button on the Chromecast first and then connect to the WiFi that my Chromecast gives out.
4. Then open the Chromecast app and make sure it sees it. (Mine still says it needs to be setup even though it already is. Don't worry about that)
5. Open Spotify and in the devices area it should say nearby cast or something like that. Try to connect and it will ask for a pin. Ignore that and hit cancel.
6. Then turn on your hotspot on your phone. It will then show your Chromecast name correctly in Spotify and you can connect and play music. (Must leave your tether on)
All in all I got it working without having a separate wireless connection to connect both of them and have audio playing through my car audio. I tried it twice now and it has worked.
Also the Chromecast app will not show its connected even though you're playing music through it. I have a screenshot of it at the bottom.
Nice - I have a ground-loop issue in my car and can't charge my phone the same time it is plugged into the stereo - this might solve that. I'm using mine to add streaming to a bedroom system, but if I like it, I may replace the streamer box on the home stereo, which cuts out on FLAC from time to time.
UPDATE: you do not have to go through all those steps everytime. I've tested further and found that it is much easier.
After you already have it setup in your car, to connect do these steps:
1. Turn on your phones WiFi and connect to your Chromecast audio.
2.After a few seconds turn your hotspot on(do not turn off the WiFi at any time).
3. After a few seconds Spotify will see your device and work perfectly.
OK,
I have had my Chromecast Audio working for the last day. I am using it with BubbleUpNP to stream audio of of my DLNA server on my home network. Working well, more reliable than the Soundmate that I was using. Going to order a micro-toslink SPDIF cable to use my on DAC. It isn't a DLNA renderer, so it won't work with software that is expecting UPNP/DLNA, but BubbleUpNP is working well.
I got one of these today, and the Hardware is really nice. It has a decent DAC, good WiFi, Dual (Analogue, Optical) output, so all good on that front. It also plays 24bit 192K FLAC from Qobuz without trouble. You should however make sure to turn the "High Dynamic Range" setting on in the CC app!
However, I don't like the way it's handled. I'm used to running Logitech Media Server with am Odroid U3 as Server and a couple of Raspberry Pi units with Hifiberry DAC/Digi/Amp addon boards, and with that setup starting music in the mornings is easy. I turn on the power, and that's it, after the Pi has booted, the music starts playing, choosing the last Playlist or Webradio Station I used when I turned it off. No need to even touch my phone.
With Chromecast I have to jump through a lot of hoops to actually get it playing any music, and that's it's biggest failure IMHO. It won't automatically reconnect, it won't resume playing where it left off, it's basically just a better kind of BT dongle (using Wifi instead of BT).
This is a huge waste of potential! Sadly, I cannot use this neat piece of Hardware with Logitech Media Server, because it doesn't work as a DLNA Renderer, and LMS can't cast to Chromecast (since that only works from Android/iOS/Chrome OS).
So, while this COULD be great, it's currently badly underachieving. Maybe someone will work out a way to fix this by rooting CC and installing Squeezelite on it, of by some other means. There is always hope!
CommanderROR said:
I got one of these today, and the Hardware is really nice. It has a decent DAC, good WiFi, Dual (Analogue, Optical) output, so all good on that front. It also plays 24bit 192K FLAC from Qobuz without trouble. You should however make sure to turn the "High Dynamic Range" setting on in the CC app!
However, I don't like the way it's handled. I'm used to running Logitech Media Server with am Odroid U3 as Server and a couple of Raspberry Pi units with Hifiberry DAC/Digi/Amp addon boards, and with that setup starting music in the mornings is easy. I turn on the power, and that's it, after the Pi has booted, the music starts playing, choosing the last Playlist or Webradio Station I used when I turned it off. No need to even touch my phone.
With Chromecast I have to jump through a lot of hoops to actually get it playing any music, and that's it's biggest failure IMHO. It won't automatically reconnect, it won't resume playing where it left off, it's basically just a better kind of BT dongle (using Wifi instead of BT).
This is a huge waste of potential! Sadly, I cannot use this neat piece of Hardware with Logitech Media Server, because it doesn't work as a DLNA Renderer, and LMS can't cast to Chromecast (since that only works from Android/iOS/Chrome OS).
So, while this COULD be great, it's currently badly underachieving. Maybe someone will work out a way to fix this by rooting CC and installing Squeezelite on it, of by some other means. There is always hope!
Click to expand...
Click to collapse
You can use it with your DLNA server, but you need to manage the Chromecast with BubbleUpNP on your phone. Not perfect, but more stable than the renderer that I was using.
I got mine yesterday and I must say that I am very happy with it. One thing though, when I play music via YouTube (via casting screen/audio in the CC app) the sound volume is really low. It is much higher when I play music via Spotify. Is there a way to boost the output from the phone? I tried the hardware buttons of course
Workaround for the Volume being too low: Use a cast-native app like Spotify to crank up the Volume.
CommanderROR said:
it's basically just a better kind of BT dongle (using Wifi instead of BT).
Click to expand...
Click to collapse
Yes, I see your point, but IMHO it's more than just a WiFi equivalent of a BT adaptor because, whilst you CAN stream from your device/locally with the right app, most "standard/consumer" use cases have the Chromecast streaming content direct from the Internet which is controlled by the app in your device. Your device doesn't do the streaming, saving power, you don't have to stay in range, etc. If I start steaming using Spotify as the app, for example, the Chromecast will continue playing my playlist even if I close Spotify on my device.
True. However, it still lacks a lot of features other multiroom systems offer. This little dingle has loads of potential, but Google will have to work hard to make it shine...

playing a radio to Chromecast 2 audio

Hello experts,
I'd love to be able to listen to this radio using your app on my tablet and streaming it to my Chromecast audio 2:
http://www.capital.it/capital/radio/live
http://radiocapital-lh.akamaihd.net/i/[email protected]/master.m3u8
Is it possible?
And how?
...I didn't fine any app really able to do it.
Thanks a lot
TuneIn has most radio stations.
If not you can try BubbleUPnP
Edit:
Just tried, I only seem to be able to cast it to a normal chromecast.
If you are rooted, AirAudio allows you to send any audio to any "cast" device. Demo is free, but has a time limit.
Use Audacity Android app. You can import stream a then cast it to CCA. Stream will go directly from source to CCA.
Umair
Doesn't have your Android a cast feature?

Categories

Resources