hi there my girlfriends T-Mobile galaxy S II SGH-t989 was running off CM 10.0.0 but it told me there was an update so I tried to update and it failed so I manually did it (downloaded new rom from internet strait to SD then booted into CWM recovery and installed) well everthing worked nothing failed but when I booted it it kept saying no service I kept playing with it for a while and it would give me service for about a minute with no data..could anyone tell me what is up?! thanks! ps. running off 10.1.2 now!
Wrong forum. I've asked mods to move your thread here.
Thread moved to correct forum.
Thank you,
mikef
XDA Senior Moderator
weatherman334 said:
hi there my girlfriends T-Mobile galaxy S II SGH-t989 was running off CM 10.0.0 but it told me there was an update so I tried to update and it failed so I manually did it (downloaded new rom from internet strait to SD then booted into CWM recovery and installed) well everthing worked nothing failed but when I booted it it kept saying no service I kept playing with it for a while and it would give me service for about a minute with no data..could anyone tell me what is up?! thanks! ps. running off 10.1.2 now!
Click to expand...
Click to collapse
Download and flash the UVMC6 radio from here:
http://forum.xda-developers.com/showthread.php?t=1895400
That should fix you right up.
same problem different carrier
meekrawb said:
Download and flash the UVMC6 radio from here:
http://forum.xda-developers.com/showthread.php?t=1895400
That should fix you right up.
Click to expand...
Click to collapse
Hey I'm having the same problem on a different carrier (koodo via telus network) is this just a radio problem?? I tried using the koodo radio I found on the radios thread but it didn't help. Is there anything special that needs to be done after flashing a radio? Should I just flash all the telus radios one by one to see if one works?
For koodo you may need to change apn settings. Just Google "koodo apn" to find the correct settings
Sent from XDA app
amazingmrbrock said:
Hey I'm having the same problem on a different carrier (koodo via telus network) is this just a radio problem?? I tried using the koodo radio I found on the radios thread but it didn't help. Is there anything special that needs to be done after flashing a radio? Should I just flash all the telus radios one by one to see if one works?
Click to expand...
Click to collapse
You need to use UVMC6 or TLMC4. Those are the only two that work.
meekrawb said:
You need to use UVMC6 or TLMC4. Those are the only two that work.
Click to expand...
Click to collapse
Definitely this! ^^^^^
Sent from my SGH-T989D using xda app-developers app
meekrawb said:
You need to use UVMC6 or TLMC4. Those are the only two that work.
Click to expand...
Click to collapse
Thanks! I actually went through and tried all the telus/koodo radios after I posted and it was the TLMC4 radio which did the trick.
Related
finally managed to get cm9 flashed but once i finally got it working, i had no baseband to activate. tryed flashing the bell radio cwm files but to no avail. any1 help me here plz
LINKSLOVESANDROID said:
finally managed to get cm9 flashed but once i finally got it working, i had no baseband to activate. tryed flashing the bell radio cwm files but to no avail. any1 help me here plz
Click to expand...
Click to collapse
Did you try rebooting a few times? If that doesn't work you may have to flash back to the stock google image and see if that works.
Did you install the cdma version by mistake?
Sent from my Xoom using XDA Premium HD app
i couldnt get the gsm version to flash. not to sure y. was getting error msgs. so i tried the cdma version and it worked. but im quite sure bell uses both gsm and cdma?
jhernand1102 said:
Did you try rebooting a few times? If that doesn't work you may have to flash back to the stock google image and see if that works.
Click to expand...
Click to collapse
i went from the bell stock rom to cm9. would going to google stock rom help?
LINKSLOVESANDROID said:
i couldnt get the gsm version to flash. not to sure y. was getting error msgs. so i tried the cdma version and it worked. but im quite sure bell uses both gsm and cdma?
Click to expand...
Click to collapse
That is incorrect. The only CDMA version is for verizon.
Flashing the CDMA version is a big no-no. I'm actually surprised it flashed.
You can try flashing the Google stock images but that might not work either.
i got my bell stock rom working. im guessing when i was going thru the toolkit, i didnt notice my baseband in both gsm and cdma. i guess i rooted my phone as a cdma lol. how would i go about reflashing to stock and restarting lol
LINKSLOVESANDROID said:
i couldnt get the gsm version to flash. not to sure y. was getting error msgs. so i tried the cdma version and it worked. but im quite sure bell uses both gsm and cdma?
Click to expand...
Click to collapse
...why would you ever do that?!?
Wipe it completely and ONLY flash GSM ROMs. Your phone is GSM.
martonikaj said:
...why would you ever do that?!?
Wipe it completely and ONLY flash GSM ROMs. Your phone is GSM.
Click to expand...
Click to collapse
but i tihnk its telling itself its cdma lol. how do i flash a google stock rom?
LINKSLOVESANDROID said:
but i tihnk its telling itself its cdma lol. how do i flash a google stock rom?
Click to expand...
Click to collapse
Sounds like you also flashed a cdma version of clockwork recovery.
just flashed a google rom and rooted, retrying rom now
everything working mint. thx 4 the advice
I have a Note 2 SGH-T889V from Wind.
I've been playing around with a few roms and have been using LiquidSmooth for a while which is pretty good, but I would like to try out CyanogenMod.
Has anyone installed CM on a T889V before? Will it be safe to wipe everything, flash the t0ltetmo nightly from here, and then flash the stock T889V modem from here?
EDIT: Also, I would like to update my CWM from 6.0.1.4 to 6.0.3.0; Do I get the T-Mobile (recovery-clockwork-6.0.3.0-t0ltetmo.img) one or the HSPA+ one? I don't want to use ROM Manager to update it because it says my device is GT-N7105, which it isn't.
You shouldn't have to flash your modem going between ROMs. Searching for T889V and bootloop will in fact tell you it's not that good an idea.
The GT-N7105 is the international LTE Note II. The CWM for it will also work for the other LTE Note II variants, including the T889V. The one thing that does come to mind is that its build.prop will report an N7105 to scripts that check for device prior to flashing. Not usually that big of a deal.
Sent from my SGH-T889V using xda app-developers app
Hi momabur
Which instructions did you use to root and flash. I am scared to get stuck in bootloop. Thanks bro
Sent from my Nexus 7 using xda app-developers app
vseslija said:
Hi momabur
Which instructions did you use to root and flash. I am scared to get stuck in bootloop. Thanks bro
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I used this root method: http://galaxynote2root.com/galaxy-note-2-root/how-to-root-galaxy-note-2-easiest-method/
Then, to flash ROMs, I wipe everything, flash the T-Mobile ROM, then the Canadian modem. I have flashed this way around 5 or 6 times without any problems..
Sent from my SGH-T889V using xda-developers app
mobabur94 said:
I used this root method: http://galaxynote2root.com/galaxy-note-2-root/how-to-root-galaxy-note-2-easiest-method/
Then, to flash ROMs, I wipe everything, flash the T-Mobile ROM, then the Canadian modem. I have flashed this way around 5 or 6 times without any problems..
Sent from my SGH-T889V using xda-developers app
Click to expand...
Click to collapse
Be careful not to flash a T-Mobile radio. I lost my IMEI and had to follow a bunch of complex steps to get it back. I can't put a Wind modem on my phone anymore though.
lilroach said:
Be careful not to flash a T-Mobile radio. I lost my IMEI and had to follow a bunch of complex steps to get it back. I can't put a Wind modem on my phone anymore though.
Click to expand...
Click to collapse
Which steps did you have to follow?
omnirom t0ltetmo comes with a radio! Tmobile radio
lilroach said:
Be careful not to flash a T-Mobile radio. I lost my IMEI and had to follow a bunch of complex steps to get it back. I can't put a Wind modem on my phone anymore though.
Click to expand...
Click to collapse
Dude, I just flashed the latest nightly from OmniRom... it comes with the TMO radio... and I've got no modem! What instructions did you use to get out of this mess?
Joni
T889V with 20131209 OmniRom and no working modem!:crying:
found solution!
flash t0lte instead of t0ltetmo and your T889v will work again!
it fixes no IMEI problem.
my device T889v on wind mobile
Hi, I'm looking for a solution. I rooted my girlfriend's T-Mobile s2 and changed out the rom for slim 4.2 and it worked well without any signal issues. I then updated to a later build (build 6&7, tried both) and tried other 4.2.2 roms. I noticed she wasn't getting signal at all. I was told to install the 4.1.2 radio for it. I did just that, and it worked, she then had signal. I was hoping that did it, but no it now just has signal and constantly loses it and a reboot is needed. This happens on any ROM I use. Any idea(s)? It would be greatly appreciated. Thank you.
Sent from my XT926 using Tapatalk 4
Do you know what Radio you flashed for her if it was not MC6 grab it from here http://forum.xda-developers.com/showthread.php?t=1895400 all 4.2.2 ROMs need the newest radio , should be good to go
The_Blue_Bomber said:
Hi, I'm looking for a solution. I rooted my girlfriend's T-Mobile s2 and changed out the rom for slim 4.2 and it worked well without any signal issues. I then updated to a later build (build 6&7, tried both) and tried other 4.2.2 roms. I noticed she wasn't getting signal at all. I was told to install the 4.1.2 radio for it. I did just that, and it worked, she then had signal. I was hoping that did it, but no it now just has signal and constantly loses it and a reboot is needed. This happens on any ROM I use. Any idea(s)? It would be greatly appreciated. Thank you.
Sent from my XT926 using Tapatalk 4
Click to expand...
Click to collapse
I am having the same issue and I started a thread about it also with no solutions yet. I flashed newest radio and still can't get any 4.2 Roms to work either, (for not getting signal, ie:radio) you are not alone! I have searched to no end and still have not found any answers. Started from scratch from both touch and non-touch CWM.
it has to be a hardware issue for you @Sargeue because if you went to stock and nothing has fixed your issues has to be the phone, Ive never had any signal issues with my s2 on the latest MC6 ever, so sorry you have having this issue give SAMMY a call if your not under warranty with T-mobile see what they can do for you
krazierokz said:
Do you know what Radio you flashed for her if it was not MC6 grab it from here http://forum.xda-developers.com/showthread.php?t=1895400 all 4.2.2 ROMs need the newest radio , should be good to go
Click to expand...
Click to collapse
I did install the UVMC6 radio to her phone. But it loses signal and I or she always has to reboot it for signal to return. But if I use an older 4.2.2 rom like Slimbean 4.2 it works flawlessly. I don't understand. Maybe the UVMC6 I downloaded was bad?
Sargeue said:
I am having the same issue and I started a thread about it also with no solutions yet. I flashed newest radio and still can't get any 4.2 Roms to work either, (for not getting signal, ie:radio) you are not alone! I have searched to no end and still have not found any answers. Started from scratch from both touch and non-touch CWM.
Click to expand...
Click to collapse
krazierokz said:
it has to be a hardware issue for you @Sargeue because if you went to stock and nothing has fixed your issues has to be the phone, Ive never had any signal issues with my s2 on the latest MC6 ever, so sorry you have having this issue give SAMMY a call if your not under warranty with T-mobile see what they can do for you
Click to expand...
Click to collapse
Sent from my XT926 using Tapatalk 4
The_Blue_Bomber said:
I did install the UVMC6 radio to her phone. But it loses signal and I or she always has to reboot it for signal to return. But if I use an older 4.2.2 rom like Slimbean 4.2 it works flawlessly. I don't understand. Maybe the UVMC6 I downloaded was bad?
Hey @blue if you/she like SLIM then flash this https://www.copy.com/s/eQvTcgdXKB0g/Cl3Kener/WICKEDAWESOME/Liquid-JB-v2.9-Linaro-Hercules.zip its updated liquid smooth and then flash the slim gapps you have, you will have the slim look and feel but with RADIO and report back if all else fails i say just stick to the slim you get signal on that's really weird you have issues with the latest radio or for ish and giggles try flashing the radio again a fresh download
Click to expand...
Click to collapse
The_Blue_Bomber said:
I did install the UVMC6 radio to her phone. But it loses signal and I or she always has to reboot it for signal to return. But if I use an older 4.2.2 rom like Slimbean 4.2 it works flawlessly. I don't understand. Maybe the UVMC6 I downloaded was bad?
Click to expand...
Click to collapse
i had this problem with slim too. i thought something went wrong with my phone or my area. but nope. what you need to do is go to mikeyman777 cm10.1 thread and find the uvmc6 tar file, then use odin to flash it. apparently just flashing the newest radio with twrp isn't enough because it's missing some files or something like that lol.
anyways i haven't had signal problems since flashing radio tar file. i've lost signal like once. before i was losing it everyday. hope this helps.
here: http://forum.xda-developers.com/showpost.php?p=43400405&postcount=3266
merrygocow said:
i had this problem with slim too. i thought something went wrong with my phone or my area. but nope. what you need to do is go to mikeyman777 cm10.1 thread and find the uvmc6 tar file, then use odin to flash it. apparently just flashing the newest radio with twrp isn't enough because it's missing some files or something like that lol.
anyways i haven't had signal problems since flashing radio tar file. i've lost signal like once. before i was losing it everyday. hope this helps.
here: http://forum.xda-developers.com/showpost.php?p=43400405&postcount=3266
Click to expand...
Click to collapse
Thank you!
Sent from my XT926 using Tapatalk 4
So I just reactivated my GNex yesterday and threw the latest PA software on there. I was running smoothly untill about 2 hours ago. The phone just lost all signal. I tried wiping everything, reflashing and reflashing a different ROM. Ive been rooting since D1 and ive never seen this happen. I even went to the verizon store and had them swap sims for me, and even that didnt help. I know i could try odining back to stock but id really rather not. Anyone have any ideas? Thanks
billymaloney3 said:
So I just reactivated my GNex yesterday and threw the latest PA software on there. I was running smoothly untill about 2 hours ago. The phone just lost all signal. I tried wiping everything, reflashing and reflashing a different ROM. Ive been rooting since D1 and ive never seen this happen. I even went to the verizon store and had them swap sims for me, and even that didnt help. I know i could try odining back to stock but id really rather not. Anyone have any ideas? Thanks
Click to expand...
Click to collapse
Flash the newest radio through fastboot.
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
Flash the newest radio through fastboot.
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
I did, I went back to stock 4.2.2 thru fastboot.
billymaloney3 said:
I did, I went back to stock 4.2.2 thru fastboot.
Click to expand...
Click to collapse
Which radio do you show under about phone > baseband version ??
deucedimetexas said:
Which radio do you show under about phone > baseband version ??
Click to expand...
Click to collapse
It says unknown after I just flashed the latest radios again in fastboot 5 min ago
billymaloney3 said:
It says unknown after I just flashed the latest radios again in fastboot 5 min ago
Click to expand...
Click to collapse
my cdma radio is fried actually.I am unable to flash the cdma radio and I just saw 2 other forum posts where that happened to someone and they couldnt get their phone to work at all after trying absolutely everything
I use the Sprint SlimBean ROM and I had no issues with it on my SCH-S960L. I had no issues with my mobile connection except for the fact that it it took some time to connect to mobile data services or even required a restart or Airplane mode toggled. This along with it sometimes did not switch between 3G and LTE when it should. Because of this I attempted to flash a newer Sprint Galaxy S3 modem. This completely disestablished any connection to services. It has 0 bars and cannot make calls, send texts, or use data. I have tried to reflash the ROM but of course, it did not help at all.
Now in the light of hope, I made a backup of the efs and firmware folders before flashing. I'm not sure how I can fix my issue with this but it was suggested to do so before flashing.
My baseband version was S960LWYAMD6. While I could reflash the old modem, (with help) I would prefer a better modem. (if there are any)
Any help is appreciated.
With best regards,
SirBenjamin
Well this just may be your day. Apparently chxnugs just posted the Modem for your particular device HERE. I would update PRL / Profile first just to see if that will help. Also have you tried ##72786# ?
prboy1969 said:
Well this just may be your day. Apparently chxnugs just posted the Modem for your particular device HERE. I would update PRL / Profile first just to see if that will help. Also have you tried ##72786# ?
Click to expand...
Click to collapse
chxnugs said:
i know this is sprint galaxy s3 section, but the straight talk s3 is basically the same phone and there is no section for it.
if you own this particular model, then you would know that its pure hell trying to find ANY files. this is the stock MD6 modem.bin ripped from my phone. ive seen people ask for this modem because they flashed the MD4 modem in hopes of getting their MSL and/or for the benefits of being able to use the 16-digit password. (which reminds me.. i have read of ways to port the 16-digit password from a .dll file in the phone? i have done loads of searching, but the password is NO WHERE to be found) and needed the stock modem. so for anyone that needs it here it is.
hopefully us ST S3 users will eventually gather up all the odin files to completely restore our phones when needed
Click to expand...
Click to collapse
I tried to flash the file chxnugs provided. I used both Mobile Odin and replaced the modem file in another flashable ZIP. Neither of them worked and I still get 0 bars/unknown baseband.
Honestly I have no idea what to do to fix this but it needs to work.
Again I say, all help is appreciated.
ok i extracted a fresh modem.bin straight from my phone. let me know if it works
Oh and just asking.. have you extracted the .bin file from the zip and tried it
Sent from my SCH-S960L using Tapatalk
chxnugs said:
Oh and just asking.. have you extracted the .bin file from the zip and tried it
Sent from my SCH-S960L using Tapatalk
Click to expand...
Click to collapse
chxnugs said:
ok i extracted a fresh modem.bin straight from my phone. let me know if it works
Click to expand...
Click to collapse
I got the same results. I extracted the .bin but renamed it to NON-HLOS.bin since Mobile Odin would not accept it as modem.bin. Am I flashing this wrong?
Sent from my SCH-S960L using Tapatalk
Did you try any of my other suggestions form post #2 ?
im sure your trying to flash it under phone section.. i managed to try to make a flashable CWM version. maybe you can try that and let me know if it works
prboy19648801865 said:
Did you try any of my other suggestions form post #2 ?
Click to expand...
Click to collapse
chxnugs said:
im sure your trying to flash it under phone section.. i managed to try to make a flashable CWM version. maybe you can try that and let me know if it works
Click to expand...
Click to collapse
Proby, I tried to do the other things you suggested. I can't update the PRL/Profile since I'm on a custom ROM. That is unless there is another way. I did not understand what you meant with the number you mentioned. If you wanted me to call that it did nothing.
As for chx, unfortunately it still did not fix it. This quick little modem update is turning into a nightmare. Not only that, but no sound plays, the microphone does not work, and DSP Manager crashes whenever I try to play media.
I really appreciate both of your support though.
Yay! I used Mobile Odin Pro and flashed a file from another thread. It may have been the file or using Mobile Odin Pro since it downloaded the correct driver. I appreciate all of your help, though.
Sent from my SPH-L710 using Tapatalk