Hi,
I tried to install new CyanogenMod and somehow I deleted everything, then I did something and kindle just stopped working on yellow triangle. Then I used Kindle Fire Unbrick Utility and tried everything, nothing helped. But when I clicked on button "other" in KFUU, device was restarted and when yellow triangle appears, it was restarted again and again. So now when I try to turn on, it is restarted repeatedly after few seconds when yellow triangle appears. My PC can't recognize device, because I can't even boot into TWRP. And one other thing - it's working only with cable plugged in.
Can anybody help me please? Any solution...
do you have fastboot?
Sent from my Galaxy Nexus using Tapatalk 4 Beta
Related
I rooted my kindle fire on 6.2 awhile ago and i did everything right and then i installed clockworkmod recovery on my kindle and flashed a ice cream sandwich rom on it and i wiped everything and cleared everything and rebooted it and now it is stuck on a flashing yellow triangle and it doesnt show up on my computer in devices and i cant figure out how to either flash a different rom or fix the problem as far as now i plug in my kindle fire and it just starts blinking it might be it turns on because its charging but is to dead to stay on and just shuts off. i dont know anymore. ANY PLEASE HELP
http://forum.xda-developers.com/showthread.php?p=25400963
I brought a Kindle Fire 2nd Gen and wanted to root it. As soon as I took it out of the box it started updating itself to 10.2.3. When I attempted to root it, it started working very slow and the boot logo would randomaly appear and now after alot of searching and trying to fix I now have a red triangle with the message
"Your Kindle device cannot boot.
You can reset your device to Factory defaults to fix this issue (all data will be deleted from the device).
<Menu options>
To reboot your device press and hold the power button for 4 seconds and release.
To reset to Factory Defaults, press the power button 5 times in succession"
Restarting doesn't work nor does trying to reset to Factory Defaults it simply goes back to the same screen.
you're boned contact amazon and tell them that it just keeps going to that screen... DO NOT SAY THAT YOU TRIED TO ROOT IT.
fmkilo said:
you're boned contact amazon and tell them that it just keeps going to that screen... DO NOT SAY THAT YOU TRIED TO ROOT IT.
Click to expand...
Click to collapse
Don'y know what you did in the end, if you contacted Amazon for a replacement, or if you acquired a Factory cable.
This should be recoverable by using a special Factory cable to get Fastboot mode, from which you can flash backed up partitions.
Ideally you should backup your own partitions on your new KF2 straight after rooting it. This thread has the instructions:
http://forum.xda-developers.com/showthread.php?t=2035047
This post makes it easier to understand and follow:
http://forum.xda-developers.com/showpost.php?p=36370218&postcount=15
same problem
arranstobbs said:
I brought a Kindle Fire 2nd Gen and wanted to root it. As soon as I took it out of the box it started updating itself to 10.2.3. When I attempted to root it, it started working very slow and the boot logo would randomaly appear and now after alot of searching and trying to fix I now have a red triangle with the message
"Your Kindle device cannot boot.
You can reset your device to Factory defaults to fix this issue (all data will be deleted from the device).
<Menu options>
To reboot your device press and hold the power button for 4 seconds and release.
To reset to Factory Defaults, press the power button 5 times in succession"
Restarting doesn't work nor does trying to reset to Factory Defaults it simply goes back to the same screen.
Click to expand...
Click to collapse
Hi,
I have the same problem right now, with the same device... can you please tell me if you fixed it and how? But please bare with me, I am a total beginner. I don't have a factory cable, can I fix it without it? If I order one, i need to wait approx. 40 days to get it.
Thank you
Alright I'm sure you all love these posts... Well, I've been rooting for a while so I'm not really a novice, pretty embarassing this happened really.. So I'll start by saying my device was successfully rooted a little while ago. I installed one of the cyanogenmod roms at first, but the battery life was terrible so I reverted back to stock. I then decided to play around a little with the systemui to change the battery icon to something that actually displays the battery %. Worked fine for a little while, then it started to reboot everytime I turned the screen off. It started to get annoying, so I decided to revert back to my backup and the problem still continued. Then I decided to wipe everything and install the new rom just released a little while ago and as soon as it started up an app kept forceclosing so it wouldn't work. So I rebooted into TWRP to wipe and reload again but accidently formatted the internal memory. So I did some searching as mounting wouldn't work and used a tool KF2_SRT_10.2.3 to restore the files to start from scratch. I used TWRP to set it to boot fastboot and it installed without issues. Then it was stuck in fastboot, so I used the command fastboot -i0x1949 oem idme bootmode 1 while in command prompt on my computer as I couldn't obviously boot into TWRP to do it there. Then it poped up with the red triangle with the exclamation point saying something about the data is corrupt and I should hold the power button for 4 seconds to reboot or hit it 5 times to factory reset, so I hit the button 5 times to reset. Wasn't really paying attention to it at the time, then it powered down, powered back up and now it's stuck on the splash screen.
TL;DR, flashed stock system.img and recovery using KF2_SRT_10.2.3, kindle booted to error screen saying to reboot device to press power 5 times to restore, pressed power 5 times, kindle stuck on splash screen.
The splash screen blinked like it did before it booted to the screen where you choose to boot either TWRP or the system. Computer doesn't detect it. Any ideas where I can start?
And yes I'm 100% sure this is a Kindle Fire 2, came in black box and last I checked had OS 10.2.3. Hoping this can be fixed, if not I can probably get away with sending it back to amazon. I hope.....
You need a factory cable.
From there you can restore the system from fastboot.
Sent from my SGH-I727 using Tapatalk 2
mindmajick said:
You need a factory cable.
From there you can restore the system from fastboot.
Sent from my SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Thank you kindly for your quick responce! I ordered a cable because I don't have my soldering iron with me here at school and I want this fixed as soon as possible. After doing some reading this should fix everything so no further replies are needed. Thanks!
I've been trying to install TWRP and FFF for the past 2 days but I've had no luck whatsoever. I first started out on my Windows 8.1 64-Bit system and the drivers would not install. I moved to my XP SP3 PC and I was able to install the drivers and get the Kindle Fire recognized in KFU. I proceeded to installing TWRP and everything went smoothly until the reboot. It would say "waiting for device" and the Kindle would reboot, but it would get stuck at a "kindle fire" logo with no animation. I've also tried installing FFF first and just plain rooting the device on stock ROM - but nothing works. It always reboots and gets stuck at "kindle fire" no animation. I've tried countless "solutions" to my problem and I'm half tempted just to use ADB to do it. Summary- TWRP "installed" but will not boot into fastboot or recovery. Please, any help is greatly appreciated.
Did you have a PC with an internet connecting? It must load somethings to install to the KF
dhhp said:
Did you have a PC with an internet connecting? It must load somethings to install to the KF
Click to expand...
Click to collapse
Yes, everything downloaded just fine. The problem is when I reboot the Kindle. Nothing happens but the Kindle Fire logo with no animation.
navyboy887 said:
Yes, everything downloaded just fine. The problem is when I reboot the Kindle. Nothing happens but the Kindle Fire logo with no animation.
Click to expand...
Click to collapse
So, whats wrong?... I dont know
Edit: Have you tried "Factory Cable"? Maybe it will help
its oya
dhhp said:
So, whats wrong?... I dont know
Edit: Have you tried "Factory Cable"? Maybe it will help
Click to expand...
Click to collapse
The Kindle will NOT reboot into recovery or fastboot. It only wants to boot into normal mode. I don't really want to do a factory cable. If that's what it takes to install TWRP & FFF on the Kindle I'm fine not rooting and putting that stuff on.
navyboy887 said:
The Kindle will NOT reboot into recovery or fastboot. It only wants to boot into normal mode. I don't really want to do a factory cable. If that's what it takes to install TWRP & FFF on the Kindle I'm fine not rooting and putting that stuff on.
Click to expand...
Click to collapse
Do you get a yellow triangle briefly before it boots up? If so, you have to hold the power button until it changes color from green to orange before it boots into recovery. At least that's how it works with my Kindle.
maltydog said:
Do you get a yellow triangle briefly before it boots up? If so, you have to hold the power button until it changes color from green to orange before it boots into recovery. At least that's how it works with my Kindle.
Click to expand...
Click to collapse
I don't get a yellow triangle. It try to reboot in recovery after I install FFF and TWRP but doesn't do anything after I reboot- just sits at a "kindle fire" logo with no animation.
Yellow triangle? Upgrade your fff dude
Sent from my air powered ceiling fan
re
androvista said:
Yellow triangle? Upgrade your fff dude
Sent from my air powered ceiling fan
Click to expand...
Click to collapse
I never had FFF installed on the Fire, I was trying to install it and TWRP for the first time. KFU says it is downloading the latest files but should I download the latest version of FFF from FFF's website and install that version instead of KFU's version? The device will not boot into recovery or into the bootloader when KFU tells it to.
I referred to the person above you
Sent from my Amazon Kindle Fire using xda app-developers app
I Rooted my kindle fire hd 7 everything was fine till today I restarted the kindle and it is stuck on system recovery screen I did the method reset to factory defaults that didn't even help its still on the screen with a red triangle and my computer doesn't recognize it at all now... Did I brick it some how please help