Anybody know why when I use adb reboot-bootloader doesn't put me into fastboot mode? All it does is a normal reboot.
have you tried the command in terminal emultator (Download)?:
Code:
su
Code:
reboot bootloader
Otherwise order/build a fastboot/factory cable
Related
i have just flashed a new recovery, and everything is just fine until i typed this:
fastboot reboot
and it does not reboot fastboot,stucks on first screen but!
pull out battery and entering by hardware key works, all fastboot, bootloader, my ROM, the new recovery.
so that confuses me, i can enter manually, but by adb i cant?
ADB works at the Bootloader and Recovery.
Fastboot works at the Fastboot mode.
Fastboot != ADB
Different commands, different purpose.
If you need reboot to fastboot command is:
"fastboot reboot-bootloader"
"fastboot reboot" just reboots your phone.
Hi, I am trying to Re-Lock my Galaxy Nexus GSM version, I've downloaded the SDK files (adb-mac and fastboot-mac) and all the image files and I am trying to execute the following commands:
adb reboot bootloader
fastboot flash bootloader bootloader-toro-primekk15.img
fastboot reboot-bootloader
fastboot flash radio radio-toro-i515.ek02.img
fastboot reboot-bootloader
fastboot flash radio-cdma radio-cdma-toro-i515.ek05.img
fastboot reboot-bootloader
fastboot -w update image-mysid-icl53f.zip
fastboot reboot-bootloader
fastboot oem lock
With the phone in normal mode I connect the USB cable to the computer, start Terminal windows and run the first command, "./adb-mac reboot bootloader" and the phone will boot into the "Fastboot Mode", then I try to execute "./fastboot-mac devices" to make sure the phone is connected and properly detected and I get nothing.
If I try to execute "./fastboot-mac flash bootloader bootloader-toro-primekk15.img" I get the message <waiting for device> and it will stay there forever.
Do you know what might be the problem ?, is there other method to do this ?, go back to Stock ROM and Re-Lock the device ?, thanks
You must also install the Samsung usb drivers. I have no idea how to do this in mac. A simple search will help you tho.
Have been trying to re-install everything for about 3 hours.
I keep getting code 10.
any help?
if your in fastboot adb won't work.
you need to issue the fastboot commands.
cd into platform tools and issue the following commands pressing enter after each line.
fastboot devices
you should get your kindle number showup.
then
fastboot -i 0x1949 oem idme bootmode 4000
fastboot -i 0x1949 reboot
this should reboot into normal mode
Sent from my Amazon Kindle Fire using xda premium
in cmd c/:kindle
fastboot -i 0x1949 flash recovery openrecovery-twrp-blaze-2.2.0.img
fastboot -i 0x1949 oem idme boot mode 4000
fastboot -i 0x1949 reboot
not worked, fastboot is wrong commander..help me! ㅜㅜ
also Fastboot oem unlock is not working to....
icolt said:
in cmd c/:kindle
fastboot -i 0x1949 flash recovery openrecovery-twrp-blaze-2.2.0.img
fastboot -i 0x1949 oem idme boot mode 4000
fastboot -i 0x1949 reboot
not worked, fastboot is wrong commander..help me! ㅜㅜ
also Fastboot oem unlock is not working to....
Click to expand...
Click to collapse
You have to have tools (android tools) linked cmd (with "cd" command).
You need to do these steps:
1. Go here http://forum.xda-developers.com/showthread.php?t=1399889 and download Version 0.9.6 (http://random.kennocha.com/kindle/utility/Kindle_Fire_Utility_v0.9.6.zip)
2. Extract it on desktop.
3. Run install_drivers.bat and install the drivers (KINDLE MUST BE NOT CONNECTED TO THE PC)
4. copy "tools" folder into your C:\ disk
5. Copy openrecovery-twrp-blaze-2.2.0.img into "tools" folder (In C: Drive)
6. open cmd as administrator
6. Run these commands: cd C:\tools
fastboot -i 0x1949 flash recovery C:\tools\openrecovery-twrp-blaze-2.2.0.img
fastboot -i 0x1949 oem idme bootmode 5001
fastboot -i 0x1949 reboot
7. Enjoy
Also: Do you have FireFireFire installed?
You need to do these steps:
1. Go here http://forum.xda-developers.com/showthread.php?t=1399889 and download Version 0.9.6 (http://random.kennocha.com/kindle/utility/Kindle_Fire_Utility_v0.9.6.zip)
2. Extract it on desktop.
3. Run install_drivers.bat and install the drivers (KINDLE MUST BE NOT CONNECTED TO THE PC)
4. copy "tools" folder into your C:\ disk
5. Copy openrecovery-twrp-blaze-2.2.0.img into "tools" folder (In C: Drive)
6. open cmd as administrator
6. Run these commands: cd C:\tools
fastboot -i 0x1949 flash recovery C:\tools\openrecovery-twrp-blaze-2.2.0.img
fastboot -i 0x1949 oem idme bootmode 5001
fastboot -i 0x1949 reboot
7. Enjoy
Also: Do you have FireFireFire installed?[/QUOTE]
so wating for device in cmd stop.....fff is installed
icolt said:
You need to do these steps:
1. Go here http://forum.xda-developers.com/showthread.php?t=1399889 and download Version 0.9.6 (http://random.kennocha.com/kindle/utility/Kindle_Fire_Utility_v0.9.6.zip)
2. Extract it on desktop.
3. Run install_drivers.bat and install the drivers (KINDLE MUST BE NOT CONNECTED TO THE PC)
4. copy "tools" folder into your C:\ disk
5. Copy openrecovery-twrp-blaze-2.2.0.img into "tools" folder (In C: Drive)
6. open cmd as administrator
6. Run these commands: cd C:\tools
fastboot -i 0x1949 flash recovery C:\tools\openrecovery-twrp-blaze-2.2.0.img
fastboot -i 0x1949 oem idme bootmode 5001
fastboot -i 0x1949 reboot
7. Enjoy
Also: Do you have FireFireFire installed?
Click to expand...
Click to collapse
so wating for device in cmd stop.....fff is installed[/QUOTE]
Before you run fastboot commands, power off kindle. After you run first command in cmd, it will show "waiting for device". After "waiting for device" will apear plug in with usb your already POWERED OFF kindle.
Josepho1997 said:
This should work:
If you have fff installed:
Copy the tools folder from KFU to your local disk.
Now power off your Kindle Fire all the way.
Then open command prompt and type:
cd c:\tools
fastboot
fastboot getvar store
(now you should see <waiting for device>)
Now power on your Kindle. Now in cmd it should say finished and the time it took. do mot anser..
Now copy TWRP to your local disk
Then type:
fastboot flash recovery c:\openrecovery-twrp-blaze-2.2.0.img
fastboot oem idme bootmode 4000
fastboot reboot
Now as it boots up use your power button to boot into recovery and it should boot into TWRP.
Click to expand...
Click to collapse
just wating for devices...........
This should work:
If you have fff installed:
Copy the tools folder from KFU to your local disk.
Now power off your Kindle Fire all the way.(all doing)
Then open command prompt and type:
cd c:\tools
fastboot
fastboot getvar store
(now you should see <waiting for device>)
Now power on your Kindle. Now in cmd it should say finished and the time it took.(wating for device..... naver finishe)
Now copy TWRP to your local disk
Then type:
fastboot flash recovery c:\openrecovery-twrp-blaze-2.2.0.img(openrecovery-twrp-blaze certainly in to tool,)
fastboot oem idme bootmode 4000
fastboot reboot
Now as it boots up use your power button to boot into recovery and it should boot into TWRP.
naver ending wating for device~~~~~~~~~~~
cd c:\tools(recovery certainly into c
fastboot
fastboot -i 0x1949 oem idme bootmode 4000
fastboot -i 0x1949 reboot
(driver re-installing many times ,certainly driver install,well showing driver numbers)
don`t end ,naver ending~~~~~~~~~~wating for device