Hey, everytime I am in a call, my ear taps the taskbar and it opens the notification window which covers my call screen. I have googled and searched this forum with no success.
Apart from TouchLockPro, was just curious as to if there is anything that addresses this issue?
Thanks in advance.
Do you have something (case?) blocking the proximity sensor? The screen should be turning off as soon as you put the phone to your ear.
Yes I do. I've just tested it out, that seems to be the problem. So is there any tweak to prevent this?
i know even with the screen turning off with the proxy censor i will find i am in the screen with the connections and battery info when i am done with a call... its kind of annoying and worrys me a bit i might accadently end the call when the screen is off.... also the flip over to make it a confrence phone is a 50/50 thing... this device is so glitchy
I randomly get this too, I think sometimes the sensor isn't used.. There are times I've noticed I can cover it up completely with my thumb and the screen doesn't go off, but other times it works just fine.
Ryryq said:
Yes I do. I've just tested it out, that seems to be the problem. So is there any tweak to prevent this?
Click to expand...
Click to collapse
Tweak...some testing to see where the sensor is (somewhere along the top near the HTC logo) and an X-acto knife to the case?
same thing happens to me, most of the time somehow I turn on airplane mode and the call disconnects.. sigh
TouchLockPro has a feature which turns the screen off using the G-sensor, but it's not just for calls, if you have it horizontal it'll be on, and if vertical it suspends/screen turns off; this would be good if it was just for calls, especially for those that use a case.
I'm just starting to use TouchLockPro (http://forum.xda-developers.com/showthread.php?t=444215) and I have most of the locking features turned off - I just hit the power button if I want to lock it.
It does keep the screen locked during a call so I no longer hit the buttons. Plus - when it unlocks I'm right back, exactly, where I left off.
There's lots of options to tweak, I think there's something for just about everyone.
I LOVE unlocking with the zoom bar - first time I've used that thing on my phone
~Eric
eknutson said:
I'm just starting to use TouchLockPro (http://forum.xda-developers.com/showthread.php?t=444215) and I have most of the locking features turned off - I just hit the power button if I want to lock it.
It does keep the screen locked during a call so I no longer hit the buttons. Plus - when it unlocks I'm right back, exactly, where I left off.
There's lots of options to tweak, I think there's something for just about everyone.
I LOVE unlocking with the zoom bar - first time I've used that thing on my phone
~Eric
Click to expand...
Click to collapse
Awesome. Mind sharing what settings you have enabled, please?
Sure
Light Sensor, Stylus Sensor, GSensor, Nav Sensor, :
Nothing checked (all disabled)
Keyboard:
Use Slider, Suspend On Slider In, Slider Out Disables LockMode and EnableInputAtSuspend are all checked, everything else is un-checked (HTC Lock API, Double TouchPanel Lock and KeepAliveAlways are un-checked.
BattClock:
just some preferences set for appearance
Telephone API:
Everything is checked (except light)
Software:
Nothing set up
Other Settings:
AutolockOnPowerOn and UnlockOnACPower are checked, everything else is un-checked (added vibrates Lock/Unlock once - I like the extra notification)
~Eric
thanks! works like a charm now, is there any way to lock it if it is idle for like 30 secs or something without havin to hit the power button
There's a number of ways to lock it using the various sensors - you can try one of those and see what fits your habits / style best. You can also click on the BattClock icon to get the menu - the lock icon is right there. That's 2 steps though...
~Eric
Hi,
as measured by Z-DeviceTest, the proximity sensor on my Desire is stuck at 0.000 cm in all lighting conditions (including a very bright torch right on top of it).
At first I suspected this was the known problem with dust settling on the sensor, but I've blown and sucked (teh-eh) with everything I have, from every angle, and the sensor is still stuck at that value.
The problem shows up both in CM7 and with the stock firmware.
I have to assume the sensor is broken.
I'm looking for ways to disable the proximity sensor, and in particular to stop it from locking the screen during calls. Naturally, since the sensor is stuck at 0.0000 cm, any time a call is initiated the screen locks up, preventing me from ending the call, dialing tones and so on.
Alternatively, I'd be happy with a way to override the screen lock via hardware buttons. The power\unlock button doesn't work
Inserting a headset during a call does unlock the screen, but naturally this is not a satisfying solution (for example, I can't use this method to make calls while driving, using the speaker).
Solutions tried with no positive effect:
- editing build.prop with "ro.proximity.delay=0"
- using trackball\volume button wake
- using screebl, screen off to control automatic screen locks
Thank you for your time.
Anyone have any pointers?
Is it really hopeless?
Are you root? If so have you considered flashing a rom with the option to disable the proximity sensor? (for example miui-au has that option)
Yes, I have a rooted device. I didn't know miui had that options, I'll check it out; thank you!
Okay, this is really starting to annoy me to hell, On the GT-n7100 only when you'd touch the button area they would light up but the t-mobile version is lighting up no matter what, if I scroll a webpage, move the phone screen to different set of icons it's driving me insane is it bugged? Or the phone like defective?
It should only light up when I tap the capacitive buttons yet any action I take it keeps lighting it up like scrolling a webpage or through the phones apps even. And both phones are set to 1.5 second duration however the T- Mobile version no matter what I touch on the screen lights keep coming on, while N7100 only when I press the capacitive button area. +
Any thoughts?
Completely disagree.
They should come on before you need them - so you can see wth you are trying to press...
Sent from my SGH-T889 using Tapatalk 2
galaxy s3 is this way as well. i think its a samsung thing
I would actually like them to stay on the whole time the screen is on. I feel like they time out much to fast.
You can change settings in display settings.
stevessvt said:
You can change settings in display settings.
Click to expand...
Click to collapse
Hm. Good call.
Im well aware of the light key duration thats not the issue. There are no other display settings to control the light keys that I see.
On the n7100 the capacitive buttons would not come on everysingle time I would scroll down on a webpage pull down the notification menu or touch the screen, there is no setting for to get rid of this. The behavior of the buttons is not the same.
The capacitive lights come on everytime you do anything.
Is there away to make it behave like the n7100?
Having some music issues since upgrading to 4.2 using Bigxie's stock rom
-When you change the volume, the screen turns on. I have double twist on the lock screen, and swiping it changes the song. I'm constantly changing the song accidentally because the screen keeps coming on. Any way to fix that?
-Sometimes I get a warning about turning the volume being too high (which it isn't, just the song it quiet). Is there a way to disable that warning?
Never had these issues in 4.1
Thanks.
Any Ideas?
Do people on the stock 4.2 experience the screen turning on?
So, we upgraded to 4.2.1 with this rom by manumanfred.
We're still having the volume screen wake problem.
Any suggestions?
ADDITION
I found a post about this, but it didn't work
http://forum.xda-developers.com/showthread.php?t=1606580
Hi,
I just received my phone, but I am disappointed about the hardware buttons below the screen since they are very very dim as in close to useless. Of course, after a while you know where they are...
anyhow, is it like this with all X800s? Is there a way in the newest CUCUO92 ROM (012s) to change the duration of how long they are lit up?
Cheers