Develop Bugs

usb issues

So I've tried connecting my phone to several computers and they all end up saying that the device is not recognized. Because of this, I can't even odin my phone to stock or anything else. So I can't exactly call sprint or samsung about it. It was working fine up until just now. Any suggestions? Thanks.

Did you download the Samsung driver ?
Simply AOSP 3.1.1

fiendslyr said:
So I've tried connecting my phone to several computers and they all end up saying that the device is not recognized. Because of this, I can't even odin my phone to stock or anything else. So I can't exactly call sprint or samsung about it. It was working fine up until just now. Any suggestions? Thanks.
Click to expand...
Click to collapse
Yes, sounds like your data cable is going bad. Grab another one. Palm Pre or Blackberry has heavy duty cables. Heard there was a good one for $2 on Amazon. Get fresh drivers from Samsung's site or from here:
http://forum.xda-developers.com/showthread.php?t=1052813
Hope this helps.

Yea I've gotten the right drivers. Right now, I'm in the process of doing root and flashing roms without a computer... using rom manager. Maybe a new rom will fix it. I'm going to order a new data cable and hope that will work.

fiendslyr said:
Yea I've gotten the right drivers. Right now, I'm in the process of doing root and flashing roms without a computer... using rom manager. Maybe a new rom will fix it. I'm going to order a new data cable and hope that will work.
Click to expand...
Click to collapse
I've tried 4 different cables on multiple computers. Mine says USB not recognized as well. How do you root and flash roms with rom manager???

Hey man, same thing was happening to me, I ended up bricking my epic with the stock cord, but I grabbed my brothers evo cord, and worked first try, dump the stock cable definitely.
Sent from my gingerbreaded epic.

BWFBezerk said:
I've tried 4 different cables on multiple computers. Mine says USB not recognized as well. How do you root and flash roms with rom manager???
Click to expand...
Click to collapse
I used this method
http://forum.xda-developers.com/showthread.php?t=1062395
Also, instead of using cwm 2.x, you can go the development forum and get the new cwm and flash that instead, just make the necessary adjustments (i.e. when flashing using ROM manager, tap 3.x instead of 2.x etc. etc.)
I am now running gingerbread on here. And I am going to try a new cable that I ordered later this week.

I think i bricked my epic.

I was angry at my current rom which was on MTD so i decided just to you the old samsung "phone flash utility" (Epic4G_FroyoUpgrade_EB13.exe) that was uploaded on their site like a year ago to go back to stock. well i think since the phone was MTD it didnt work and now its stock at the connect cable screen, is there anything i can do?

I am running CleanGB MTD. The first time I tried to install it I had a bad download & needed to redo it from scratch. I used the Samsung EB13 Windows Installer utility to restore my phone back to stock & had no problems at all. It was up & running on MTD just had a few errors that I did not have time to fix that morning & I ran it for a few days after restoring with the utility, rooting, & restoring my backup. But now I'm enjoying the MTD goodness.....
Can you get back into download mode?
If so I would get a different USB cable & try running the installer again.

endurance1 said:
I was angry at my current rom which was on MTD so i decided just to you the old samsung "phone flash utility" (Epic4G_FroyoUpgrade_EB13.exe) that was uploaded on their site like a year ago to go back to stock. well i think since the phone was MTD it didnt work and now its stock at the connect cable screen, is there anything i can do?
Click to expand...
Click to collapse
from what ive been reading on the threads, i believe you can just odin back, and back sure you have reboot and re-partition checked marked.

I found out what the problem was. I should have known this because this happened to me once before. I was using my front USB ports. Front ports on most pc's are only 1.0 and you need to use the back 2.0 ones to work. Most people think its cable issues but its usually just USB port. This samsung utility is a complete gem! screw odin. thanks for the response!!!

endurance1 said:
I found out what the problem was. I should have known this because this happened to me once before. I was using my front USB ports. Front ports on most pc's are only 1.0 and you need to use the back 2.0 ones to work. Most people think its cable issues but its usually just USB port. This samsung utility is a complete gem! screw odin. thanks for the response!!!
Click to expand...
Click to collapse
Glad you got it working. I wasn't sure if the Samsung utility repartitioned...now I know...thanks.
Sent from my SPH-D700 using XDA App

endurance1 said:
I found out what the problem was. I should have known this because this happened to me once before. I was using my front USB ports. Front ports on most pc's are only 1.0 and you need to use the back 2.0 ones to work. Most people think its cable issues but its usually just USB port. This samsung utility is a complete gem! screw odin. thanks for the response!!!
Click to expand...
Click to collapse
Good to hear!!
Glad you got it fixed......

thanks guys. Yeah ive been using that sammy file since ec05 came out. this is the 3rd brick maybe 4th it got me out of. it works for EVERYTHING. better than odin.

Wow, I didn't know this exe thing existed. Odin has NOT been working on my home PC for tje past few weeks(months?) and that has kept me from trying anything that would require Odin to recover from, i.e. mtd.
Glad I read here in the Q&A pretty regularly. Most of the time I'm seeing if there's anyone I can help, but times like this I end up learning new things.
sent from my secret underground bunker

That sounds like a great thing to have sitting on my computer. I tried to find it but was not successful. Can anyone point me to a copy of it.
Thanks
George

ghmacdonald said:
That sounds like a great thing to have sitting on my computer. I tried to find it but was not successful. Can anyone point me to a copy of it.
Thanks
George
Click to expand...
Click to collapse
I am at work so I cannot post the file I have, but I put the file name in & searched in Google & several download options popped up.
Google Search: Epic4G_FroyoUpgrade_EB13.exe
Check it out & let me know if you need me to post a copy of the file, I saw several already on services like multiupload in the search.

Look at the thread stickied in development. The Samsung tool won't work all the time.
-Marcusant via Tapatalk

So my friend gave me his phone to see if I could fix it. It loops in CWM and won't get out of it and I can't connect with odin to it. (My phone connects just fine.) This is the only other thing I can think of. Anyone else got other ideas?
---------- Post added at 01:25 PM ---------- Previous post was at 01:08 PM ----------
Well tried it and phone still not discovered by the PC. I am at a loss at what to do. I know my friend tried to install some type of rom to it and didn't make a backup. It boots in to CWM non-stop and I can flash zips but it never leaves that loop even after the flashes. I can boot into Download mode but the phone won't be recognized. Tried both Odin and this. The phone is getting charged through the cable though which confuses me even more. Any help?!

Anyone have any ideas?! I am at a loss at what to do!

KillerFu said:
Anyone have any ideas?! I am at a loss at what to do!
Click to expand...
Click to collapse
Use a different cable with odin... it may be charging it but its not getting a data connection... also put into download mode and plug in usb... then "jiggle" the cord until it recognizes it...
Sent from my SPH-D700 using Tapatalk

Uninstall and reinstall the drivers. Then also try Odin with the battery and phone plugged in. Make sure you use a better cable than stock.

Device is soft bricked. Can get into download. What next?

I was running the ICS leaked release and decided to try another ROM. I think my mistake was that I didn't flash a custom recovery like Rogue's and just threw the ROM on my SD, went into the stock recovery that came with the ICS leaked ROM, ran Calkulin's wipe and flashed the ROM.
The phone won't boot up. I can get into Download Mode but I don't know where I can download a stock tar to flash in ODIN 1.85. If I try and go to the stock recovery it doesn't work.
Any help would be appreciated.
***EDIT***
It's still stuck at the data.img portion of the process (end process). It's probably not going far from there.
I can't get into the stock recovery but it does allow the download mode still.

Android300ZX said:
I was running the ICS leaked release and decided to try another ROM. I think my mistake was that I didn't flash a custom recovery like Rogue's and just threw the ROM on my SD, went into the stock recovery that came with the ICS leaked ROM, ran Calkulin's wipe and flashed the ROM.
The phone won't boot up. I can get into Download Mode but I don't know where I can download a stock tar to flash in ODIN 1.85. If I try and go to the stock recovery it doesn't work.
Any help would be appreciated.
Click to expand...
Click to collapse
In the dev threads look for sfhubs oneclick el29. Download it and follow instructions. It will be fine.
Team-Nocturnal Blended ICS

Right here is all you need. http://forum.xda-developers.com/showthread.php?p=21134991
Then use autoroot to get cwm back.
Team-Nocturnal Blended ICS

I tried that earlier and it didn't work. I deleted all the files and will try it again. When I tried the steps it just hung at waiting for connection or something to that effect.

Android300ZX said:
I tried that earlier and it didn't work. I deleted all the files and will try it again. When I tried the steps it just hung at waiting for connection or something to that effect.
Click to expand...
Click to collapse
That really sound like you don't have the drivers quite right. When you open the regular odin, and your phone is in download mode, does a yellow box on odin show up? If not its the drivers.
Team-Nocturnal Blended ICS

bigtoysrock said:
That really sound like you don't have the drivers quite right. When you open the regular odin, and your phone is in download mode, does a yellow box on odin show up? If not its the drivers.
Team-Nocturnal Blended ICS
Click to expand...
Click to collapse
Yes. It shows COM port I in yellow which is a good thing because it recognizes something is connected.

Android300ZX said:
Yes. It shows COM port I in yellow which is a good thing because it recognizes something is connected.
Click to expand...
Click to collapse
Then the one click should work just fine. Make sure you follow his instructions to the T. Also on his page he has some drivers, you should install those, it uninstall or over write the old ones. Just to be sure.
Team-Nocturnal Blended ICS

Thanks. It looks like it's working now. It's installing right now and then we shall see but I'm pretty sure it'll work. I'll leave it stock for now until ICS comes out. I'm so buy working on my new car that I barely have time to geek out anymore on my phone.

Don't try to flash anything with stock recovery ...it has to be officially signed by Samsung ...won't work
Sent from my SPH-D710 using XDA App

It didn't work. Last night I went to run the EL29 Restore - Rooted and it got stuck on the data.img portion. The progress bar on the phone and computer just hung there. I disconnected the cable and went to bed (after 1.5 hours of it just sitting there stuck).
I'm trying it again today and lets see if it gets stuck.
I'm reflashing EL29 over the FB21 (w/e the leaked version of ICS was) I had. Is that the issue?

Sorry but I think your bricked. There is a "Stuck at Data.img" thread here in q&a.
The issue still isn't repairable.
The way you went about getting stuck here is a little different tho. So hopefully I'm wrong.
Good luck

Are you stuck in a bootloop? If so, do you get any further than the Samsung splash screen?
Try re-flashing the ICS leak. I read somewhere that it could be a filesystem issue with switching to and from GB. If that doesn't work, maybe you'll have better luck with using ODIN as opposed to the one-click method. You'll find the tars here-
http://forum.xda-developers.com/showthread.php?t=1391732
In most cases you'll be flashing them in PDA, but read everything closely, and follow the steps.
If you have insurance, I almost suggest going to Sprint while it still seems there's no evidence you've been flashing (yellow triangle), as they'll likely just replace it for you.
If none of that works, then it sounds like a rare problem that happened to mine a few months ago. This was the only thread I found at that time, but it was for AT&T's GSII.
http://forum.xda-developers.com/showthread.php?p=20834412#post20834412
I ended up getting a new one, but I would love to finally find a solution since I still have it. Pretty much the only thing I haven't tried is a JTAG service.

Juq said:
Are you stuck in a bootloop? If so, do you get any further than the Samsung splash screen?
Try re-flashing the ICS leak. I read somewhere that it could be a filesystem issue with switching to and from GB. If that doesn't work, maybe you'll have better luck with using ODIN as opposed to the one-click method. You'll find the tars here-
http://forum.xda-developers.com/showthread.php?t=1391732
In most cases you'll be flashing them in PDA, but read everything closely, and follow the steps.
If you have insurance, I almost suggest going to Sprint while it still seems there's no evidence you've been flashing (yellow triangle), as they'll likely just replace it for you.
If none of that works, then it sounds like a rare problem that happened to mine a few months ago. This was the only thread I found at that time, but it was for AT&T's GSII.
http://forum.xda-developers.com/showthread.php?p=20834412#post20834412
I ended up getting a new one, but I would love to finally find a solution since I still have it. Pretty much the only thing I haven't tried is a JTAG service.
Click to expand...
Click to collapse
If I turn on the phone I get a screen that says
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I don't get to the point where it even shows me a Samsung logo; just straight to that screen.
When I go into Download Mode I see
ODIN MODE
Product Name: SPH-D710
Custom Binary DOwnload: No
Current Binary: Samsung Official

Here's the thread caspersfi mentioned. I'm reading through it myself now.
http://forum.xda-developers.com/showthread.php?t=1504808&highlight=stuck+at+data+img
Good luck!

Juq said:
Here's the thread caspersfi mentioned. I'm reading through it myself now.
http://forum.xda-developers.com/showthread.php?t=1504808&highlight=stuck+at+data+img
Good luck!
Click to expand...
Click to collapse
I'm reading it now. I want to add that it was CWM touch that messed up my phone because I had flashed that before attempting to flash another ROM since ICS build came with the default factory recovery. So I'm guessing my file system is corrupt. I'll keep reading through the thread. (I skipped to the last couple of pages.

Hey so can you still get into download mode? I ran into the same problem where it kept getting stuck in odin. Try a different usb cable and a different port. Odin is very fussy with usb cables. When I had the trouble I was using a Logitech usb cable. Switched to the one that came with my phone and it worked like a charm.

rbtrucking said:
Hey so can you still get into download mode? I ran into the same problem where it kept getting stuck in odin. Try a different usb cable and a different port. Odin is very fussy with usb cables. When I had the trouble I was using a Logitech usb cable. Switched to the one that came with my phone and it worked like a charm.
Click to expand...
Click to collapse
I'm using the one that came with the phone and I tried different ports. I don't have another cable to use but I doubt that will help me out. Thanks for the suggestions though.

Android300ZX said:
I'm using the one that came with the phone and I tried different ports. I don't have another cable to use but I doubt that will help me out. Thanks for the suggestions though.
Click to expand...
Click to collapse
I didnt think it was possible that a simple cable swap would help me when I was in the exact same position as you either but it sure did. What could it hurt to just try a different cable? I am sure you could borrow one from a friend just to try it. According to qbking77 samsung cables are pretty bad when it comes to using odin.

rbtrucking said:
I didnt think it was possible that a simple cable swap would help me when I was in the exact same position as you either but it sure did. What could it hurt to just try a different cable? I am sure you could borrow one from a friend just to try it. According to qbking77 samsung cables are pretty bad when it comes to using odin.
Click to expand...
Click to collapse
I will try that shortly then. I have a paper that's due today to write so school before phone, lol.

Alright i really hope it works, let us all know.
Sent from my SPH-D710 using XDA App

[Q] Att S3 Wont Connect to Computer

I currently rooted using the latest version of the Sons of Android ROM. Last night I made a back-up of it and flashed the Synergy ROM to test it for a friend. When I restored my back-up, I could no longer connect to the computer. I tried to reinstall the drivers through Kies and also direct from Samsung. The phone charges when connect to the USB port, but does not connect. I have tried two computer so I think it is the phone.
I search the forums and didnt find anything that help.
Does anyone have any suggestions?
Thank you!

Huskerjeff said:
I currently rooted using the latest version of the Sons of Android ROM. Last night I made a back-up of it and flashed the Synergy ROM to test it for a friend. When I restored my back-up, I could no longer connect to the computer. I tried to reinstall the drivers through Kies and also direct from Samsung. The phone charges when connect to the USB port, but does not connect. I have tried two computer so I think it is the phone.
I search the forums and didnt find anything that help.
Does anyone have any suggestions?
Thank you!
Click to expand...
Click to collapse
Make sure fast charge isn't selected.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

KorGuy123 said:
Make sure fast charge isn't selected.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I can not find any fast charge setting. I am starting to worry that I might have damaged the phone. I hope I just need to re-flash a driver or something.
Thank you!

make sure you're using the factory cable for the device.
try another USB port, preferably a port directly connected to the computers motherboard.
delete the current USB drivers for your phone on the computer. reboot it. in task manager, stop any kies background processes. reinstall drivers. reboot and see if that takes.

Huskerjeff said:
I currently rooted using the latest version of the Sons of Android ROM. Last night I made a back-up of it and flashed the Synergy ROM to test it for a friend. When I restored my back-up, I could no longer connect to the computer. I tried to reinstall the drivers through Kies and also direct from Samsung. The phone charges when connect to the USB port, but does not connect. I have tried two computer so I think it is the phone.
I search the forums and didnt find anything that help.
Does anyone have any suggestions?
Thank you!
Click to expand...
Click to collapse
Did you make a nandroid of the previous rom ? Flash back to that . Flashing any rom made for the NA version of the Galaxy s3 will NOT brick your phone. NO physical damage will happen in any way.
Yes check the cord to make sure its not that....samsung phones are picky....even with the same cord.
Fast charge is usually in the kernel settings menu. It will be something you would had to enable, I've never seen it come enabled on a rom. What kernel are you on ? I don't think you see that setting on TW based rom's anyway ( I assume you are on SoA right now?)
Have you tried to do a complete wipe and flash another rom ?

hednik said:
Did you make a nandroid of the previous rom ? Flash back to that . Flashing any rom made for the NA version of the Galaxy s3 will NOT brick your phone. NO physical damage will happen in any way.
Yes check the cord to make sure its not that....samsung phones are picky....even with the same cord.
Fast charge is usually in the kernel settings menu. It will be something you would had to enable, I've never seen it come enabled on a rom. What kernel are you on ? I don't think you see that setting on TW based rom's anyway ( I assume you are on SoA right now?)
Have you tried to do a complete wipe and flash another rom ?
Click to expand...
Click to collapse
I have a nandroid of my stock (after rooted) ROM, but it is on my computer now, not on the phone so I cant access it. I also had a nandroid of Sons of Android that was connecting just fine before I flashed Synergy ROM. I restored the Sons of Android ROM (nandroid) that was still on my external SD card and that didnt fix it.
I just did a complete wipe (Cache, Davlik Cache, System, Factory Reset, and Internal Memory), then installed the Wicked ROM with the stock kernel. It still doesnt work.
I tried two different cord on two different computers with no luck.
Thank you!

Is your usb debugging enabled?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 4 Beta

Huskerjeff said:
I have a nandroid of my stock (after rooted) ROM, but it is on my computer now, not on the phone so I cant access it. I also had a nandroid of Sons of Android that was connecting just fine before I flashed Synergy ROM. I restored the Sons of Android ROM (nandroid) that was still on my external SD card and that didnt fix it.
I just did a complete wipe (Cache, Davlik Cache, System, Factory Reset, and Internal Memory), then installed the Wicked ROM with the stock kernel. It still doesnt work.
I tried two different cord on two different computers with no luck.
Thank you!
Click to expand...
Click to collapse
Completely remove the drivers on your PC and reinstall again. Also if you have kies remove that first.
Sent from my SAMSUNG-SGH-I747 using xda premium

Domoo said:
Is your usb debugging enabled?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 4 Beta
Click to expand...
Click to collapse
USB Debugging is currently enabled, but I have tried it both ways.
I also am noticing my data connection is really, really slow, much slower than normal. I looked under the Synergy ROM and there was some talk of needing to reflash modem and bluetooth when reverting to a stock kernel. Could this be the problem?
Thanks!

You could try mobile Odin and flash the rooted stock that way... Its a shot
You have to use a .tar file though
Sent from my SAMSUNG-SGH-I747 using xda premium

hednik said:
You could try mobile Odin and flash the rooted stock that way... Its a shot
You have to use a .tar file though
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Can you you give me some more info on Mobile Odin? I have never heard of it.
Last night I flashed the KT747 kernel because it has updated USB drivers, but it still didnt work.
I still have to believe that something went wrong when flashing the other night because that is when it stop work, but I am starting to think it is a hardware issue. It is very wierd!
Thank you!

Do you get any error when plugging it? I had a similar issue last week until I updated Windows.

BWolf56 said:
Do you get any error when plugging it? I had a similar issue last week until I updated Windows.
Click to expand...
Click to collapse
Nope, no error message. It just doesnt reconize it is there. I have tried three computers (Windows 7 - 64 Bit & (2) XP 32 Bit) and three different cords.
This sucks! Now I am hearting it from all the iPhone users.
Thanks!

Huskerjeff said:
Can you you give me some more info on Mobile Odin? I have never heard of it.
Last night I flashed the KT747 kernel because it has updated USB drivers, but it still didnt work.
I still have to believe that something went wrong when flashing the other night because that is when it stop work, but I am starting to think it is a hardware issue. It is very wierd!
Thank you!
Click to expand...
Click to collapse
Try this, same thing was happening to me on a rooted stock rom. The steps listed here helped me reconnect phone to PC.
http://blog.vacs.fr/index.php?post/...ot-detected-problem-on-Android-Samsung-phones

Huskerjeff said:
Nope, no error message. It just doesnt reconize it is there. I have tried three computers (Windows 7 - 64 Bit & (2) XP 32 Bit) and three different cords.
This sucks! Now I am hearting it from all the iPhone users.
Thanks!
Click to expand...
Click to collapse
Try wiping and flashing another ROM?

dratsablive said:
Try this, same thing was happening to me on a rooted stock rom. The steps listed here helped me reconnect phone to PC.
http://blog.vacs.fr/index.php?post/...ot-detected-problem-on-Android-Samsung-phones
Click to expand...
Click to collapse
I hope we are getting closer!
When is use the *#7284#, I get the UART section that is on PDA and I cant change it.
Under the USB section I have button that says "Qualcomm USB Settings" with a whole punch of options:
MTP
MTP + ADB
PTP
PTO + ADB
RNIS + DM + MODEM
RMNET + DM + MODEM
DM + MODEM + ADB
Should I use one of these settings?
Thank you!

Huskerjeff said:
I hope we are getting closer!
When is use the *#7284#, I get the UART section that is on PDA and I cant change it.
Under the USB section I have button that says "Qualcomm USB Settings" with a whole punch of options:
MTP
MTP + ADB
PTP
PTO + ADB
RNIS + DM + MODEM
RMNET + DM + MODEM
DM + MODEM + ADB
Should I use one of these settings?
Thank you!
Click to expand...
Click to collapse
You should have two options, MODEM and PDA. Mine is set to MODEM.

Still no luck! Very Frustrating!
I used Mobile Odin to flash back completely to stock, and the usb still would not connect. I do not know what else to do. I will have to remove the SD Card and use a card reader for now. I can flash back to stock when if I want to take it in and get it fixed or replaced.

Huskerjeff said:
Still no luck! Very Frustrating!
I used Mobile Odin to flash back completely to stock, and the usb still would not connect. I do not know what else to do. I will have to remove the SD Card and use a card reader for now. I can flash back to stock when if I want to take it in and get it fixed or replaced.
Click to expand...
Click to collapse
did u already try another cable, I had over 5 cables that suddenly stopped working for no reason, only charges but it doesn't connect to the pc..
so try another cable is my suggestion.

Stuck in boot loop with no USB option

I just inherited a t-mobile phone that was rooted. I installed the latest version of TWRP and tried to re-root it but now it's in a boot loop and on top of that I can't connect the phone to a computer b/c I get the "USB Device Not Recognized" message. I've re-installed the drivers and I've tried the toothpick trick. Nothing is working. What are my options?

jconway1968 said:
I just inherited a t-mobile phone that was rooted. I installed the latest version of TWRP and tried to re-root it but now it's in a boot loop and on top of that I can't connect the phone to a computer b/c I get the "USB Device Not Recognized" message. I've re-installed the drivers and I've tried the toothpick trick. Nothing is working. What are my options?
Click to expand...
Click to collapse
First wrong section...second I'd say flash a different Rom/kernel pair... or redo your recovery from Odin
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

bmg002 said:
First wrong section...second I'd say flash a different Rom/kernel pair... or redo your recovery from Odin
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
First, I believe this is the correct section - the phone I am working with is a T-Mobile Galaxy S II... Second, I can't Odin because I don't have a working usb connection. I've tried several different ROMS from this fine section and I get the same result... Boot Loop

If you flashed TWRP 2.6.3, that's your problem.
Flash 2.6.1

This is the wrong section because it has nothing to do with ROM development.
With that being said if you can still boot into twrp you still have hope. Try loading a different ROM into an SD card using a converter and slide back in the phone to properly wipe first then re flash.
I don't understand why you can't get a proper USB connection going but above suggestion may solve it.
Sent from my SGH-T989 using xda app-developers app

You could always get a SD card reader, connect t to ur PC, DL a flashable twrp 2.6.1.0 and flash the recovery, then flash a ROM an u should be back in action, but above mentioned is right this is the wrong forum u need q&a
Sent from my -T989 using XDA Premium 4 mobile app

jconway1968 said:
First, I believe this is the correct section - the phone I am working with is a T-Mobile Galaxy S II... Second, I can't Odin because I don't have a working usb connection. I've tried several different ROMS from this fine section and I get the same result... Boot Loop
Click to expand...
Click to collapse
Just to confirm a few things: where do you not have the working USB connection? in download mode? If so, I'd try reinstalling the drivers.
Also, I see in your sig that you state your phones are:
Asus Nexus 7
Sprint Galaxy Note 2
Neither of which is a SGH-T989. Are you sure you are flashing the correct ROM/Kernel for your device?
also you said it came rooted but you re-rooted it. What process did you use to re-root it?
One last thing: you say you got it second hand, are you sure it is a T-Mobile galaxy S 2? May want to check under the battery for a "T989" or "i9100". The i9100 is NOT a T-Mobile galaxy S 2. It should be SGH-T989 if they didn't give you incorect info about the phone.
You could also try a different USB cable or hub. I've had USB extension cables give me grief and the front ports on my PC don't like my phone.

bmg002 said:
Just to confirm a few things: where do you not have the working USB connection? in download mode? If so, I'd try reinstalling the drivers.
Also, I see in your sig that you state your phones are:
Asus Nexus 7
Sprint Galaxy Note 2
Neither of which is a SGH-T989. Are you sure you are flashing the correct ROM/Kernel for your device?
also you said it came rooted but you re-rooted it. What process did you use to re-root it?
One last thing: you say you got it second hand, are you sure it is a T-Mobile galaxy S 2? May want to check under the battery for a "T989" or "i9100". The i9100 is NOT a T-Mobile galaxy S 2. It should be SGH-T989 if they didn't give you incorect info about the phone.
You could also try a different USB cable or hub. I've had USB extension cables give me grief and the front ports on my PC don't like my phone.
Click to expand...
Click to collapse
Thanks for your help. Here are the answers to your questions:
I think there is something wrong with the micro USB input on the phone. I have reinstalled the drivers several times. I have tried different cables and different computers. I even tried the toothpick trick. No luck.
I do have a GN2. The SG2 is for my daughter...
It is a genuine SGH-T989 I checked under the battery.

soupysoup said:
You could always get a SD card reader, connect t to ur PC, DL a flashable twrp 2.6.1.0 and flash the recovery, then flash a ROM an u should be back in action, but above mentioned is right this is the wrong forum u need q&a
Sent from my -T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Where do I find and how do I put a flashable twrp 2.6.1.0 on my micro sd card? I've always used goomanager in the past but obviously that won't work in this case...

jconway1968 said:
Where do I find and how do I put a flashable twrp 2.6.1.0 on my micro sd card? I've always used goomanager in the past but obviously that won't work in this case...
Click to expand...
Click to collapse
Everything I've found requires a computer connection. I need to be able to flash it back from v2.6.3.1 using TWRP to do it. Is that possible?

soupysoup said:
You could always get a SD card reader, connect t to ur PC, DL a flashable twrp 2.6.1.0 and flash the recovery, then flash a ROM an u should be back in action, but above mentioned is right this is the wrong forum u need q&a
Sent from my -T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
One more piece of information that might be helpful... When I try to wipe the cache I get this message "Formatting Data using make_ext4fs function" and it stays stuck there. I've left it for over 30 minutes and it doesn't ever move from that screen. Hope that helps... I really need some help here.

jconway1968 said:
One more piece of information that might be helpful... When I try to wipe the cache I get this message "Formatting Data using make_ext4fs function" and it stays stuck there. I've left it for over 30 minutes and it doesn't ever move from that screen. Hope that helps... I really need some help here.
Click to expand...
Click to collapse
In twrp settings change it to use rm instead of formatting
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

jconway1968 said:
Everything I've found requires a computer connection. I need to be able to flash it back from v2.6.3.1 using TWRP to do it. Is that possible?
Click to expand...
Click to collapse
If u go to the dev section on this phone and look around a bit, u will find the twrp thread, in that thread is a flashabke copy of 2.6.1.0, if u can't find it pm me, I have a copy, all u would need to do is put the zip file on any micro SD card then put it in the phone and flash it with the twrp u have now, it will revert it back to 2.6.1.0 and that should fix ur prob, but like I said of u can't find it pm me and I'll shoot u a copy
Sent from my -T989 using XDA Premium 4 mobile app

soupysoup said:
If u go to the dev section on this phone and look around a bit, u will find the twrp thread, in that thread is a flashabke copy of 2.6.1.0, if u can't find it pm me, I have a copy, all u would need to do is put the zip file on any micro SD card then put it in the phone and flash it with the twrp u have now, it will revert it back to 2.6.1.0 and that should fix ur prob, but like I said of u can't find it pm me and I'll shoot u a copy
Sent from my -T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok so I Flashed it and now it's stuck on the Blue Teamwin screen???

jconway1968 said:
Ok so I Flashed it and now it's stuck on the Blue Teamwin screen???
Click to expand...
Click to collapse
Let it sit on the TeamWin screen for a minute or so... I find it sometimes takes a little bit.
If it doesn't ever get past there, try hooking it up to a PC and see if you can get ADB to load (presuming you have ADB installed and ADB drivers installed). If you can, try to do an "adb pull /proc/last_kmsg" and a "adb logcat > logcat.txt" and zip those up and toss them on here.
If you CAN'T get into adb, I would try hooking the phone up to Kies and see if it will do anything for you.
Or you could try following this guide as you have the T-Mobile SGH-T989 (not the Telus SGH-T989D):
http://forum.xda-developers.com/showthread.php?t=1513359
BUT make sure to grab the correct stock image file for whatever version your android currently is (ie if you are on Android 2.3.6, then make sure to get the T-mobile KL1 2.3.6 stock image).
Also, what ROM did you flash? was it a 4.3 ROM? If so, did you update your radio before you flashed the ROM? I think 4.1+ needs the updated radio to function properly.
I know you said you can't connect through ODIN, but I'm hoping it is because of some odd driver or odd ODIN version. That thread has the stuff to make it all work I believe.
I'm really hoping you can get ADB to work. If you can pull a logcat of your bootup process, it will be much easier to figure out what went wrong.

bmg002 said:
Let it sit on the TeamWin screen for a minute or so... I find it sometimes takes a little bit.
If it doesn't ever get past there, try hooking it up to a PC and see if you can get ADB to load (presuming you have ADB installed and ADB drivers installed). If you can, try to do an "adb pull /proc/last_kmsg" and a "adb logcat > logcat.txt" and zip those up and toss them on here.
If you CAN'T get into adb, I would try hooking the phone up to Kies and see if it will do anything for you.
Or you could try following this guide as you have the T-Mobile SGH-T989 (not the Telus SGH-T989D):
http://forum.xda-developers.com/showthread.php?t=1513359
BUT make sure to grab the correct stock image file for whatever version your android currently is (ie if you are on Android 2.3.6, then make sure to get the T-mobile KL1 2.3.6 stock image).
Also, what ROM did you flash? was it a 4.3 ROM? If so, did you update your radio before you flashed the ROM? I think 4.1+ needs the updated radio to function properly.
I know you said you can't connect through ODIN, but I'm hoping it is because of some odd driver or odd ODIN version. That thread has the stuff to make it all work I believe.
I'm really hoping you can get ADB to work. If you can pull a logcat of your bootup process, it will be much easier to figure out what went wrong.
Click to expand...
Click to collapse
You guys are great!!! I really appreciate all the help. No matter what I do, ADB, Kies, different cables, different computers, nothing gets past the "USB Device Not Recognized" pop up. I let it sit for 15 minutes, twice. Still no love... I loaded TWRP_2.6.1.0_Hercules and then reboot and that's when it got stuck. Prior to that I had loaded TMobileT989UVMC6RootedDeodexed Rom. I forget where I got it. I'm pretty sure it was a 4.1.2 based rom.

jconway1968 said:
You guys are great!!! I really appreciate all the help. No matter what I do, ADB, Kies, different cables, different computers, nothing gets past the "USB Device Not Recognized" pop up. I let it sit for 15 minutes, twice. Still no love... I loaded TWRP_2.6.1.0_Hercules and then reboot and that's when it got stuck. Prior to that I had loaded TMobileT989UVMC6RootedDeodexed Rom. I forget where I got it. I'm pretty sure it was a 4.1.2 based rom.
Click to expand...
Click to collapse
weird... I am not sure why it is being so fussy with your phone.
Hopefully somebody has a better suggestion than I do, but my next thought is to try ebay-ing the phone in hopes that somebody gives you a few bucks for it. It sounds to me like the internal memory module is dying and the USB port is shot.
Is your water damage sticker pink/red or missing? It should be under the battery.
I hate thinking that the phone is just dead, but without being able to connect it to the PC in either recovery or download mode and not being able to boot into a ROM or recovery, I think the next step is to scrap it and hope somebody can send you a few bucks... or if you have experience soldering, maybe try replacing the USB connector?
I could be wrong mind you... The only time I had issues like that it was due to a badly flashed recovery and I needed to use ODIN to get back up and running. As a thought, do you have a Windows XP 32-bit computer you could try plugging the phone into? And while the phone is plugged in, can you check device manager for all devices? maybe try installing the drivers manually? I suggest windows XP 32bit because that is what I use the majority of the time with my phone. I've also used Windows 7 64-bit and it worked.

bmg002 said:
weird... I am not sure why it is being so fussy with your phone.
Hopefully somebody has a better suggestion than I do, but my next thought is to try ebay-ing the phone in hopes that somebody gives you a few bucks for it. It sounds to me like the internal memory module is dying and the USB port is shot.
Is your water damage sticker pink/red or missing? It should be under the battery.
I hate thinking that the phone is just dead, but without being able to connect it to the PC in either recovery or download mode and not being able to boot into a ROM or recovery, I think the next step is to scrap it and hope somebody can send you a few bucks... or if you have experience soldering, maybe try replacing the USB connector?
I could be wrong mind you... The only time I had issues like that it was due to a badly flashed recovery and I needed to use ODIN to get back up and running. As a thought, do you have a Windows XP 32-bit computer you could try plugging the phone into? And while the phone is plugged in, can you check device manager for all devices? maybe try installing the drivers manually? I suggest windows XP 32bit because that is what I use the majority of the time with my phone. I've also used Windows 7 64-bit and it worked.
Click to expand...
Click to collapse
Thanks again for your time and suggestions... I've always been very impressed with the xda community. I actually got this phone, used, from Swappa. And I am in the process of returning it for a refund. But the seller is being difficult and is trying to stick me with the phone. I was just trying to salvage it on my own, just in case... Thanks again.

jconway1968 said:
Thanks again for your time and suggestions... I've always been very impressed with the xda community. I actually got this phone, used, from Swappa. And I am in the process of returning it for a refund. But the seller is being difficult and is trying to stick me with the phone. I was just trying to salvage it on my own, just in case... Thanks again.
Click to expand...
Click to collapse
that sucks. I've heard good things about Swappa, but living in Canada I can't use it. My opinion it sounds like you got a dud and based on how hard the guy is fighting to not give you a refund, I wouldn't be surprised if he knew it was doa and just fluked out and get it running before he sold it. Or maybe it got water damaged and he knew it would fail soon so he sold it before it completely quit.
I hope you get it all sorted out.
Good luck and sorry I couldn't be more helpful.

bmg002 said:
that sucks. I've heard good things about Swappa, but living in Canada I can't use it. My opinion it sounds like you got a dud and based on how hard the guy is fighting to not give you a refund, I wouldn't be surprised if he knew it was doa and just fluked out and get it running before he sold it. Or maybe it got water damaged and he knew it would fail soon so he sold it before it completely quit.
I hope you get it all sorted out.
Good luck and sorry I couldn't be more helpful.
Click to expand...
Click to collapse
You were great!!! Thanks again...