I want to root my Xperia Arc S LT18i
my current ROM .587
i followed this instruction:
flash 4.1.B.0.587
- flash an insecure (lower build) kernel
- root using the 2011 Xperia ICS Rooting Toolkit
- flash back the 4.1.B.0.587 kernel
but after Flash back to 4.1.B.0.587 super user SU disappear and not rooted
Please i need you support
MASDASL said:
I want to root my Xperia Arc S LT18i
my current ROM .587
i followed this instruction:
flash 4.1.B.0.587
- flash an insecure (lower build) kernel
- root using the 2011 Xperia ICS Rooting Toolkit
- flash back the 4.1.B.0.587 kernel
but after Flash back to 4.1.B.0.587 super user SU disappear and not rooted
Please i need you support
Click to expand...
Click to collapse
in step 3 you must uncheck some thing in flashtool but i forgot them ...
instead you can use unlocking your bootloader and then flash stock pre-rooted kernel and install SU on your rom...
(its very easier than your way)
Maybe you can try the one click root... It's there in general section...
Sent from my Xperia Neo V using xda app-developers app
s.bluedreams said:
in step 3 you must uncheck some thing in flashtool but i forgot them ...
instead you can use unlocking your bootloader and then flash stock pre-rooted kernel and install SU on your rom...
(its very easier than your way)
Click to expand...
Click to collapse
Already my bootloader is unhooked
this is mean flash the kernel LT18i_4.1.B.0.431_Kernel_DOWNgrade ??????
MASDASL said:
I want to root my Xperia Arc S LT18i
my current ROM .587
i followed this instruction:
flash 4.1.B.0.587
- flash an insecure (lower build) kernel
- root using the 2011 Xperia ICS Rooting Toolkit
- flash back the 4.1.B.0.587 kernel
but after Flash back to 4.1.B.0.587 super user SU disappear and not rooted
Please i need you support
Click to expand...
Click to collapse
If you're going to use Stock ROM
if you flashed back .587 ftf, you probably left all .sin checked. You should have unchecked kernel.sin, No final verification unchecked.
Reflash custom kernel. If still no root, flash flashable zip in SuperSU thread
If you're going to use a custom ROM
Just flash respective kernel, wipe data,cache,dalvik,system in CWM and install rom. No need to root .587, flashing .587 is for increasing partition only(in case).
zgmfx20 said:
If you're going to use Stock ROM
if you flashed back .587 ftf, you probably left all .sin checked. You should have unchecked kernel.sin, No final verification unchecked.
Reflash custom kernel. If still no root, flash flashable zip in SuperSU thread
If you're going to use a custom ROM
Just flash respective kernel, wipe data,cache,dalvik,system in CWM and install rom. No need to root .587, flashing .587 is for increasing partition only(in case).
Click to expand...
Click to collapse
do you mean exclude them at the right part in Flash tool???
then what should i exclude exactly ???
MASDASL said:
do you mean exclude them at the right part in Flash tool???
then what should i exclude exactly ???
Click to expand...
Click to collapse
kernel.sin if you flashed kernel before flashing .587 ftf. Or you may flash ftf, then flash kernel, then flash zip in SuperSU thread.
Are you needing Stock ROM or Custom ROM?
MASDASL said:
Already my bootloader is unhooked
this is mean flash the kernel LT18i_4.1.B.0.431_Kernel_DOWNgrade ??????
Click to expand...
Click to collapse
NO
please search in forums to know how you can unlock your BL
yes exactly what i need to install custom ROM via CWM and X-part
what should i do ??
s.bluedreams said:
NO
please search in forums to know how you can unlock your BL
Click to expand...
Click to collapse
i already unlocked it and ensure that via service command through dail *#*#service#*#*
and Bootloader unlocked : Yes
MASDASL said:
i already unlocked it and ensure that via service command through dail *#*#service#*#*
and Bootloader unlocked : Yes
Click to expand...
Click to collapse
do you do this steps???
http://forum.xda-developers.com/showthread.php?t=1034087
zgmfx20 said:
kernel.sin if you flashed kernel before flashing .587 ftf. Or you may flash ftf, then flash kernel, then flash zip in SuperSU thread.
Are you needing Stock ROM or Custom ROM?
Click to expand...
Click to collapse
i need to install custom one like CM 10 or CM 10.1
MASDASL said:
i need to install custom one like CM 10 or CM 10.1
Click to expand...
Click to collapse
If your BL is unlocked you should download Rom and kernel that you want
rom must be .zip and you should place it in sd card
kernel must be .img or .elf
and kernel Wi-Fi modules must be .zip and you should place it on SD too
then you download QuickIMG tool and place the kernel in images folder of it
then turn off phone and hold menu key and plug usb cable
LED would be blue
then you open QuickIMG and choose your kernel and flash it
then turn on phone
when the led is blue you should press Vol down key
then you enter CWM
do:
-wipe date
-wipe cache
-mount and storage > format/system
-advanced> wipe dalvick cache
then install zip and choose Rom
then install zip and choose Wi-fi modules
reboot...
MASDASL said:
yes exactly what i need to install custom ROM via CWM and X-part
what should i do ??
Click to expand...
Click to collapse
CM10 you say then you need a custom JB kernel, like Fusion,Lupus or nAa kernel, or whatever kernel you want.
You don't need X-Parts. There are many tutorials out there. But I'll just help you.
Download kernel and paste to pc, in any folder.
1) Flash .587 ftf
2) Flash custom kernel (with phone off, hold menu button, connect to pc. Go to Flashtool, then click the thunderlike button, select fastboot mode, select kernel to flash, point to kernel file)
3) Boot, then repetitively press back button to boot to CWM. If lupus kernel, it is volume down.
4) wipe data,cache,dalvik cache,system
5) Install ROM
s.bluedreams said:
do you do this steps???
http://forum.xda-developers.com/showthread.php?t=1034087
Click to expand...
Click to collapse
Yes Sir
zgmfx20 said:
CM10 you say then you need a custom JB kernel, like Fusion,Lupus or nAa kernel, or whatever kernel you want.
You don't need X-Parts. There are many tutorials out there. But I'll just help you.
Download kernel and paste to pc, in any folder.
1) Flash .587 ftf
2) Flash custom kernel (with phone off, hold menu button, connect to pc. Go to Flashtool, then click the thunderlike button, select fastboot mode, select kernel to flash, point to kernel file)
3) Boot, then repetitively press back button to boot to CWM. If lupus kernel, it is volume down.
4) wipe data,cache,dalvik cache,system
5) Install ROM
Click to expand...
Click to collapse
my phone now flashed with kernel .587
where is the custom kernel ???
MASDASL said:
my phone now flashed with kernel .587
where is the custom kernel ???
Click to expand...
Click to collapse
use this kernel for Cm10 or 10.1
http://forum.xda-developers.com/showthread.php?t=1926299&highlight=fusion
MASDASL said:
my phone now flashed with kernel .587
where is the custom kernel ???
Click to expand...
Click to collapse
LuPuSJBv12
or
Fusion
zgmfx20 said:
LuPuSJBv12
or
Fusion
Click to expand...
Click to collapse
After Flashing this kernel an do the above step
are the ROM from Free Xperia Project FXP226-cm-10-20130629-UNOFFICIAL-pepper will be installed on my Arc S LT18i ????
MASDASL said:
After Flashing this kernel an do the above step
are the ROM from Free Xperia Project FXP226-cm-10-20130629-UNOFFICIAL-pepper will be installed on my Arc S LT18i ????
Click to expand...
Click to collapse
dude pepper is for Xperia Sola. You need anzu(Arc) or ayame(Arc S).
If you need to choose what rom for JB, here. 2nd post
Related
Hi everyone...
My phone is LT15i. I used to CM9 on my phone.Today I flash the Stock Rom and Kernel via flashtool.And I root my phone with Doom method
I unlock my bootloader.I install X-parts but my phone dont boot Recovery mod.When restarting Sony logo but led no blue.Blue led isnt coming.
And phone open.I want to Custom rom but recovery isnt running Please help me...
If you have BL unlocked, just flash a Kernel with CWM in it.
RamEsRock said:
If you have BL unlocked, just flash a Kernel with CWM in it.
Click to expand...
Click to collapse
I want to use this Romhttp://forum.xda-developers.com/showthread.php?t=1788701.Can you offer me a kernel which available with this custom rom.But the kernel must contain recovery
Which kernel can I install contain cwm? But it must be run with this Romhttp://forum.xda-developers.com/showthread.php?t=1788701
Mazellat said:
Which kernel can I install contain cwm? But it must be run with this Romhttp://forum.xda-developers.com/showthread.php?t=1788701
Click to expand...
Click to collapse
You have many choices here.
My suggestion is :
1. ArcKnight 3.5.1 with Wifi module http://forum.xda-developers.com/showthread.php?t=1597771
2.ICS stock kernel with CMW, just search in the development section u will find it
[Disclaimer] Do it at your own risk. I am not responsible for anything happened to your phone.
Hi all, I've just upgraded my phone to Acro S recently. It is running ICS 4.0.4 build 6.1.A.1.58. It has been updated to 6.1.A.2.55
So here is a modified Stock Kernel with CWM which I created based on Arakmar's Stock ICS kernel (Build 11) for XS
Credits:
1. Arakmar - for the ramdisk and CWM
2. DoomLord and FXP team - for too many things to mention
Link (do not mirror)
6.1.A.2.55 - http://www.mediafire.com/?zuzatcl3it3zce7
6.1.A.2.50 - http://www.mediafire.com/?jrjiwg13w3gvxpf
6.1.A.2.45 - http://www.mediafire.com/?rq43glb93khd9ia
6.1.A.1.58 - http://www.mediafire.com/?wsuha53wvcc3cav
Instructions:
1. Unzip the files to the fastboot folder, there are 2 files:
kernel.sin -- Stock ICS Kernel
kernel-cwm.elf -- Stock ICS Kernel with init.d support and CWM 5.5.0.4
2. Get into fastboot mode, type:
- To flash the CWM kernel
Code:
fastboot flash boot kernel-cwm.elf
- To flash back the Stock kernel
Code:
fastboot flash boot kernel.sin
To get into CWM - Reboot your phone, tap the screen (not buttons) a few times when the blue led and button lights appear
To root your phone, follow instructions here: http://forum.xda-developers.com/showpost.php?p=30320507&postcount=11
If you like it, please hit the [Thanks] button or you can buy me a beer
Thank you.
But i have a question: what is ram disk use for?
I used xperia s mod kernel to flash supersu.apk, then flash back stock arco s kernel, and add CMW. But some .zip file can not use.
Does this give us root or do i need to root the phone first and then flash this kernel ?
Also, do we need to unlock bootloader for this ?
Can anyone please comment on performance? Thanks in advance!!
Hi do i need to flash these 2 files or just one i want cwm.and does it include root or not?
mercury_beta said:
Thank you.
But i have a question: what is ram disk use for?
I used xperia s mod kernel to flash supersu.apk, then flash back stock arco s kernel, and add CMW. But some .zip file can not use.
Click to expand...
Click to collapse
ramdisk is part of kernel. it runs initial scripts that control how the phone starts.
dusanzk said:
Does this give us root or do i need to root the phone first and then flash this kernel ?
Also, do we need to unlock bootloader for this ?
Click to expand...
Click to collapse
You need to unlock bootloader first. This kernel won't give you root. But you can boot into cwm to flash any package that root your phone or you can flash a complete rom, if available.
john9 said:
Can anyone please comment on performance? Thanks in advance!!
Click to expand...
Click to collapse
There is no difference in performance as stock kernel
noriya said:
Hi do i need to flash these 2 files or just one i want cwm.and does it include root or not?
Click to expand...
Click to collapse
You need to flash only the one with cwm. It won't root your phone.
Thanks for your reply,is it ok to flash cwm without root first?and unlock bootloader is the same xperia s right?
cobrato said:
[Disclaimer] ]
Hi all, I've just upgraded my phone to Acro S recently. It is running ICS 4.0.4 build 6.1.A.1.58
)
Click to expand...
Click to collapse
Could you make a pre-root one?
I am sorry.
Although I checked, and kernel.sin of original and kernel.sin of cobrato are the same, is it right now?
puriketsuangel said:
I am sorry.
Although I checked, and kernel.sin of original and kernel.sin of cobrato are the same, is it right now?
Click to expand...
Click to collapse
I think you're right. The moded kernel is kernel-cwm.elf.
Root Package
Here is the Root package after you flash the kernel with cwm
To root your phone:
1. copy the RootPhone.zip file to sdcard (internal storage)
2. reboot into cwm
3. install the package
4. reboot
Link:
http://www.mediafire.com/?11rhxm1k490edxz
papacarla said:
I think you're right. The moded kernel is kernel-cwm.elf.
Click to expand...
Click to collapse
Sorry.
Ｔhanks alot.
It works on Acro HD with Acro S's ICS ROM flashed exlude baseband.
UPD: I did not like the ICS. There are only 320 mb of free RAM. I have 460 mb of free RAM on 2.3.7. So, I installed back the 2.3.7
if you could add 2way call recording patch to this kernel would be great
cobrato said:
Here is the Root package after you flash the kernel with cwm
To root your phone:
1. copy the RootPhone.zip file to sdcard (internal storage)
2. reboot into cwm
3. install the package
4. reboot
Link:
http://www.mediafire.com/?11rhxm1k490edxz
Click to expand...
Click to collapse
This worked for me, unlocked bootloader, flashed kernel-cwm and then flashed rootphone in CWM. Thanks.
Just a suggestion,
You might wanna add "+ Root" to your title seeing as this is another way to root the device.
With CWM, can we then flash custom ROMs for Xperia S or a Kernel with permanent root (e.g. DoomKernel)?
I'd like to get rid of all the Facebook-crap in the stock ROM but if it will be there again after the next update from Sony it's no use.
skycamefalling said:
With CWM, can we then flash custom ROMs for Xperia S or a Kernel with permanent root (e.g. DoomKernel)?
I'd like to get rid of all the Facebook-crap in the stock ROM but if it will be there again after the next update from Sony it's no use.
Click to expand...
Click to collapse
Once you unlock bootloader, you can flash any custom kernel.
If the kernel comes with CWM, you can flash any rom/zip with root
But I think current S custom kernels/roms are based on older version: 6.1.A.0.452
Bootloader unlock will probably void warranty.
But how about rooting? No righht?
Where to find the tools for unlocking bootloader.
Would appreciate a link if anybody now...
SweKen said:
Where to find the tools for unlocking bootloader.
Would appreciate a link if anybody now...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1527159
It's the same method for Xperia P/U/S/Acro S.
AM New to this root world...
Am having this file : Xperia S Stock Firmware 6.1.A.2.55 Deodex Flashable Zip Root by tosa.th
and having flash tool 0.9.9.0 latest version but i do no how to flash this firmware its rooted firmware...
am having Unlock boot loader key also...
pls give me step by step procedure....
Just flash ka or ads kernel and ur will get the root
U don't have to flash a whole ROM to get root.
Sent from my Xperia S using xda app-developers app
Just flash Advanced Stock Kernel:
http://forum.xda-developers.com/showthread.php?t=1729280
Welcome to the forum. Your thread has been moved as all question threads belong here in Q&A not General. Please post in the correct sections going forward.
Thanks
AvRS
hush66 said:
Just flash Advanced Stock Kernel:
http://forum.xda-developers.com/showthread.php?t=1729280
Click to expand...
Click to collapse
Hi I have to unlock my bootloader.Can I flash advanced stock kernel through flashtool on 6.1.A.2.55.Do I have to flash firmware again.What are the drm keys
Sent from my LT26i using xda premium
RISHI RAJ said:
Hi I have to unlock my bootloader.Can I flash advanced stock kernel through flashtool on 6.1.A.2.55.Do I have to flash firmware again.What are the drm keys
for this flash does i need .ftf file or how can any 1 pls help me list of things i need to flash
does i need androidsdk if s pls tell
can any i help me in image tutorial
Click to expand...
Click to collapse
masksan23 said:
RISHI RAJ said:
Hi I have to unlock my bootloader.Can I flash advanced stock kernel through flashtool on 6.1.A.2.55.Do I have to flash firmware again.What are the drm keys
for this flash does i need .ftf file or how can any 1 pls help me list of things i need to flash
does i need androidsdk if s pls tell
can any i help me in image tutorial
Click to expand...
Click to collapse
No image tutorial. Plain text.
DRM keys are Digital Rights Management keys. You will lose these when you unlock your bootloader. TrackID and some other (not really important) Sony apps won't work.
So, first, go to http://unlockbootloader.sonymobile.com/ and download the tools needed.
There you have all the steps needed to unlock bootloader.
After you've unlocked bootloader head down to the CWM thread and download the flashable file. You have the instructions at the thread.
Flash CWM and the phone will boot in CWM mode now. Remember to put the ROM you want to flash on sdcard, or put kernel.sin file so you can boot back in the system.
Download the Root.zip flashable file for cwm (you'll find it in most of the root threads), and put it in the root of storage.
Then flash the CWM through fastboot, and the phone will boot in CWM recovery.
Navigate to "Install zip from sdcard -> Choose zip from sdcard -> "root.zip" (use the volume buttons to navigate and power to select).
Select Yes and your phone will be rooted.
If you want, you can download a kernel like Advanced ICS which will autoroot your phone when you flash it.
If you don't flash another kernel, then power off the device and boot into fastboot mode, and flash kernel.sin.
Your phone will boot into the system and will be rooted
Click to expand...
Click to collapse
Persephone echnetr
Have you tried the Bin4ry method for rooting! This will keep your BL locked but roots your phone!
I have unlocked my boot loader.
I checked by typing *#*#7324...#*#*
Service info - configuration - in last line
It says bootloader unlocked : yes
Is it correct...
Give me correct link for download. which is best to flash+rooting file that u think...
Pls I downloaded flashable zip file by deodex...
Pls help... In future jellybean is going to come I want to use that also
Sent from my LT26i using xda app-developers app
masksan23 said:
I have unlocked my boot loader.
I checked by typing *#*#7324...#*#*
Service info - configuration - in last line
It says bootloader unlocked : yes
Is it correct...
Give me correct link for download. which is best to flash+rooting file that u think...
Pls I downloaded flashable zip file by deodex...
Pls help... In future jellybean is going to come I want to use that also
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
That's not how you unlock bootloader, that's how you check if your bootloader is unlockable. Head over to Bootloader Unlock thread and unlock your bootloader, then flash a CWM recovery through fastboot, and flash a kernel which will root your device.
There is Jelly Bean for our device, AOKP, CM10, PA etc etc.. Use the search button!
akkiannu said:
Have you tried the Bin4ry method for rooting! This will keep your BL locked but roots your phone!
Click to expand...
Click to collapse
.55 is not rootable with the Bin4ry method...
First this method is not new , but it's just a small guide for people who don't know how to root there phones with unlocked bootloader.
What you need:
1- Xperia Ion (LT28h\LT28i) with unlocked bootloader.
2- You have to be on stock official 6.2.B.0.211 rom.
3- DooMLoRD 6.2.B.0.203 Custom Kernel + TWRP: link
4- Superuser zip: link
5- Stock 6.2.B.0.211 kernel: link
How to root:
1- Copy "Superuser zip" to your phone.
2- While you are on stock 6.2.B.0.211 , Flash DooMLoRD kernel on Fastboot mode using Flashtool.
3- Turn your phone on , and when you see TWRP logo , press VOL+ bottom , you will get into "TWRP" recovery.
4- Now choose "Install" then choose "sdcard" then "Superuser zip" and swipe to flash it.
5- After end flashing , press "HOME" then choose "reboot to Fastboot" while connecting your phone to PC.
6- Now in Flashtool , use Fastboot to flash the Stock Kernel.
All Done!
If this thread is in the wrong section , please move it. I am sorry.
how about the recovery ??? did the old recovery will work ??
MrGezz said:
how about the recovery ??? did the old recovery will work ??
Click to expand...
Click to collapse
DoomLoRD kernel already have "TWRP" recovery.
The $niper said:
DoomLoRD kernel already have "TWRP" recovery.
Click to expand...
Click to collapse
for the stock kernel.. :
I think we can get root for the stock JB rom but loosing the recovery function after flash the stock kernel at the final..Am i right?
yes
The $niper said:
First this method is not new , but it's just a small guide for people who don't know how to root there phones with unlocked bootloader.
What you need:
1- Xperia Ion (LT28h\LT28i) with unlocked bootloader.
2- You have to be on stock official 6.2.B.0.211 rom.
3- DooMLoRD 6.2.B.0.203 Custom Kernel + TWRP: link
4- Superuser zip: link
5- Stock 6.2.B.0.211 kernel: link
How to root:
1- Copy "Superuser zip" to your phone.
2- While you are on stock 6.2.B.0.211 , Flash DooMLoRD kernel on Fastboot mode using Flashtool.
3- Turn your phone on , and when you see TWRP logo , press VOL+ bottom , you will get into "TWRP" recovery.
4- Now choose "Install" then choose "sdcard" then "Superuser zip" and swipe to flash it.
5- After end flashing , press "HOME" then choose "reboot to Fastboot" while connecting your phone to PC.
6- Now in Flashtool , use Fastboot to flash the Stock Kernel.
All Done!
Click to expand...
Click to collapse
You don't need to install superuser.zip. TWRP has a builtin rooting function.
After going to recovery for the first time and when you reboot, it will install su & superuser.
what about lockedbootloader device?
ponext said:
what about lockedbootloader device?
Click to expand...
Click to collapse
DoomLord is working on it.
Soon we will get the root access in JB.:laugh:
Can you re upload superuser.zip? I can't download it.
EDIT: Got it.
MrGezz said:
for the stock kernel.. :
Click to expand...
Click to collapse
kumbangdesa said:
I think we can get root for the stock JB rom but loosing the recovery function after flash the stock kernel at the final..Am i right?
Click to expand...
Click to collapse
Yes , this method to root your phone on stock kernel , later maybe we can get recovery.
ganeshbiyer said:
You don't need to install superuser.zip. TWRP has a builtin rooting function.
After going to recovery for the first time and when you reboot, it will install su & superuser.
Click to expand...
Click to collapse
Lool i didn't get that on my mind! But to install root we need to turn the phone up then open SuperSU installer , so flashing superuser.zip maybe fastest and easyier!
pharix said:
Can you re upload superuser.zip? I can't download it.
EDIT: Got it.
Click to expand...
Click to collapse
Ok np
ganeshbiyer said:
You don't need to install superuser.zip. TWRP has a builtin rooting function.
After going to recovery for the first time and when you reboot, it will install su & superuser.
Click to expand...
Click to collapse
Working like a charm.
Now we just need a recovery.
This is not development.
This is a guide.
Moved to the General section.
Moderating from my Xperia ION
ToledoJab said:
This is not development.
This is a guide.
Moved to the General section.
Moderating from my Xperia ION
Click to expand...
Click to collapse
Thanks , i know that , see the first replay but just i forgot that , my mistake.
guys what could seems be the problem, I get error "the phone must be rooted" in the flashing tool. i have all the requirements listed but i get that error? could somebody tell me what to do. thanks
U need an unlocked bootloader.
Does anyone think that there will be a one-click-root-tool at some point? I don't feel like flashing this much..
Doomlord is working on it
Hi guys i have a problem when I instaling the eXistenZ v2 on LT26. I rooted my phone i have recovery and when i install a rom have error nr 7 in revovery, any ideas?
Flash the kernel file from the rom itself
Try flashing the kernel from the rom itself bro this works most of the time Extract it first from the zip file of the ROM you want to install then install the kernel usually it is the boot.img file Flash it via fastboot mode using flashtool then voila you have the kernel of the ROM you want to use and most of the time the recovery comes with it too :good:
ksmalcuga said:
Hi guys i have a problem when I instaling the eXistenZ v2 on LT26. I rooted my phone i have recovery and when i install a rom have error nr 7 in recovery, any ideas?
Click to expand...
Click to collapse
Are You on stock firmware? Existenz requires You to be on stock 6.2.b.1.96 firmware. Also, You have to flash v1 and then flash v2, not the v2 directly.
11:55 said:
Try flashing the kernel from the ROM itself bro
Click to expand...
Click to collapse
Do check, this ROM is stock based, so it doesn't have a separate kernel.
I flashed witth stock 6.2.b.1.96, and try to flash V1 witch recovery v6.0.3.0 but still error ''Error in /sdcard/xperia_s_existenz_v1.zip (status 7)'' Maybe try with other kernel?
ksmalcuga said:
I flashed witth stock 6.2.b.1.96, and try to flash V1 witch recovery v6.0.3.0 but still error ''Error in /sdcard/xperia_s_existenz_v1.zip (status 7)'' Maybe try with other kernel?
Click to expand...
Click to collapse
Huh, weird. Just to verify, could You try downloading the v1 again? Or else, do You have a unlocked bootloader? If yes, then You can flash the DoomKernel.
Yes, i downloaded rom again, and i have lock bootloader witch no posibly to unlock 'allowed-no'' something like this, but this rom can be flash without unlocked bootloader.
ksmalcuga said:
Yes, i downloaded rom again, and i have lock bootloader witch no posibly to unlock 'allowed-no'' something like this, but this rom can be flash without unlocked bootloader.
Click to expand...
Click to collapse
Well, since You have a locked bootloader, You can't flash other kernels. Try this recovery, If even this one doesn't work, then try going back to full stock(no root, no recovery) and root using DoomLord's method and try above recovery again as it had worked for Me earlier.
ksmalcuga said:
Hi guys i have a problem when I instaling the eXistenZ v2 on LT26. I rooted my phone i have recovery and when i install a rom have error nr 7 in revovery, any ideas?
Click to expand...
Click to collapse
This is waaaay late but, may help someone.
As I understand it, this is an issue with the kernel/recovery you have. You need to flash a boot.img with a combined kernel/recovery that is compatible with the rom you wish to flash. You use fastboot for that:
Code:
fastboot flash boot boot.img
fastboot reboot
So, for official CM11, grab boot.img from the rom zip file and you should get (a rather old but fine for CM11) CWM recovery.
For many other Acro S (hikari) roms you find - e.g. @deedwar's BeanStalk - you will get TWRP recovery if you flash the included boot.img file.
Once you've got the kernel/recovery flashed, then you flash the full rom after the reboot.
MiyagiSan said:
This is waaaay late but, may help someone.
As I understand it, this is an issue with the kernel/recovery you have. You need to flash a boot.img with a combined kernel/recovery that is compatible with the rom you wish to flash. You use fastboot for that:
Code:
fastboot flash boot boot.img
fastboot reboot
So, for official CM11, grab boot.img from the rom zip file and you should get (a rather old but fine for CM11) CWM recovery.
For many other Acro S (hikari) roms you find - e.g. @deedwar's BeanStalk - you will get TWRP recovery if you flash the included boot.img file.
Once you've got the kernel/recovery flashed, then you flash the full rom after the reboot.
Click to expand...
Click to collapse
I think You didn't notice, but He said He has locked bootloader. So He cannot follow the procedure You mentioned.
Mirhawk said:
I think You didn't notice, but He said He has locked bootloader. So He cannot follow the procedure You mentioned.
Click to expand...
Click to collapse
Yes, this is for unlocked bootloader only.
Just noticed OP mentions a locked bootloader in a later post.