Develop Bugs

JP3 Lag Fix- ext3 partition via script = 1610 quadrant

This is early, hacky, and built from the work of the guys on the Vibrant forums: http://forum.xda-developers.com/showthread.php?t=739647
anomalous3 figured out that "there was only one thing running as root that could safely be replaced; the boot logo player. So, all this does is replace the boot logo player with a script that calls userinit.sh from /data/local and then calls the (now renamed) bootlogo player for those of you who want that nifty startup screen"
What this does is allows the phone to mount an ext3 partition on boot so we can have a lag fix on JP3. I'm getting 1610 on quadrant and it's pretty stable. Please someone improve this!! shaunm89 and I just hacked this together from other's work.
Directions:
1.) Create an EXT3 partition on your external SD card of 2gb. It should be the second partition after the fat32 partition
2.) Flash Modaco's pre-rooted JP3 through Odin: http://android.modaco.com/content/s...insecure-boot-clockworkmod-recovery-for-odin/
3.) Boot the phone up. Open market and install Root Explorer (costs $) and Busybox. Update busybox
4.) Download these files: http://www.megaupload.com/?d=ONGUDAIJ
Copy them across to the SD card. Move playlogos1 and playlogosnow to /system/bin. Move userinit.sh to /data/local. Use root explorer to set permissions read (all 3) write (user only) execute (all 3). 0755 for those who know linux. You can use adb to push if you wanna get fancy.
5.) Reboot. Use root explorer to see if /sd-ext exists, and if so, whether /sd-ext/data and /sd-ext/dalvik-cache exist. If so it worked! If not, reboot again and then check.
That's it. Maybe someone can package this into an update.zip, maybe someone can take it and make it more stable and even faster (ext4 for example)

great! hope we could find an easier way
Sent from my GT-I9000

Is it a must to get the pre-rooted version of firmware? However using the original SP3 then root by myself?
On the other hand, I think I will modify your init.rc as I would rather to do all the moving by myself
Great job, hope we can get EXT4 soon.

In step 4, " Move userinit.sh to /local/data" should be data/local. Quadrant benchmark 1700.

seems like the script is calling busybox, but is it necessary to use root explorer. Could one substitute root explorer with adb?
I assume root explorer is just to do things adb can do, but locally on the device instead of attached via USB.

I tried this and it and i can see sd-ext and the subfolders but is this all we need to do?
is /data/data linked to the sdcard?
I am asking because i tried to reboot the phone without the sdcard in it and i can still see all my apps and everything is working fine.
Thoughts?
Also there is an error in section 4 of your instructions. there is no /local/data, it is /data/local.
Also playlogos1 and playlogosnow files needs to be renamed with a capital P for this to work.

No need to install root explorer if you can use adb to push the files. I just wasn't sure how to use adb to push to those directories.
I fixed the other mistake, thanks
This is not ideal but gets the job done. I'm hoping you guys can make it better!

Are you able to download anything from the market after doing this?
My market is just stuck on "starting download" and that's it.

clubtech said:
Are you able to download anything from the market after doing this?
My market is just stuck on "starting download" and that's it.
Click to expand...
Click to collapse
Protected apps don't show but i've been able to get all my other purchased and free apps installed and running fine.

Strange.
I'll flash again and try again.

Yea i don't know.
The market will download some and won't others.
Also my Quadrant test is getting stuck at 3/4 stage of the I/O test so it might be my SDCard which sucks.
I used a 16GB SanDik class 4 card.

clubtech said:
Yea i don't know.
The market will download some and won't others.
Also my Quadrant test is getting stuck at 3/4 stage of the I/O test so it might be my SDCard which sucks.
I used a 16GB SanDik class 4 card.
Click to expand...
Click to collapse
sandisk are one of the best cards you can get, kingston are known to get stuck at this stage, are you sure you don't have a fake sandisk card?
anyway if you leave it running after about 10 minutes quadrant will finish and still give you a massive score of over 1500.. just shows how reliable the quadrant scores are .

does it mean that quadrant is good but speed isnt?

Tried this fix on my JP3 but no luck. I don't get these folders.
Maybe it must be MoDaCo?
If I manually execute the script I get these folders, but after reboot they are gone.
Pretty new to this maybe I'm doing something wrong?

drygmasken said:
Tried this fix on my JP3 but no luck. I don't get these folders.
Maybe it must be MoDaCo?
If I manually execute the script I get these folders, but after reboot they are gone.
Pretty new to this maybe I'm doing something wrong?
Click to expand...
Click to collapse
Ok, did it from scratch today. Format, flashed MoDaCo prerooted JP3 and everything. Stilll I don't get this to work (
Please, any ideas?

Finally got it to run faster with this fix, thanks for sharing!
drygmasken said:
Ok, did it from scratch today. Format, flashed MoDaCo prerooted JP3 and everything. Stilll I don't get this to work (
Please, any ideas?
Click to expand...
Click to collapse
Also happened to me initially. /sd-ext won't show up or if it does, it doesn't contain the correct folders though it is listed when you run 'mount'. Laggy with Quadrant result at 975.
So, went back and reformatted SD w/Fat32 then EXT3, cleared cache/data, re-flashed Modaco's JP3, installed the latest Busybox, copied files per OP and I finally got it working after a couple of re-boots (3, i think). It is running smooth so far w/quadrant 1622. GPS seems to be getting locks on SATs quickly but you still can't get to LBSTest via the keypad. Still can't write to the external sd when mounted/shared to PC.
Also tried JAC's work (see this thread: [KERNEL/RECOVERY] Vibrant EXT2/3/4 with init.d support) since it has the nifty feature allowing user to put startup scripts on boot up. I flashed his kernel but i got stuck on the 'Vibrant' boot screen. anyways, will give it another try later.

titovic said:
Also happened to me initially. /sd-ext won't show up or if it does, it doesn't contain the correct folders though it is listed when you run 'mount'. Laggy with Quadrant result at 975.
So, went back and reformatted SD w/Fat32 then EXT3, cleared cache/data, re-flashed Modaco's JP3, installed the latest Busybox, copied files per OP and I finally got it working after a couple of re-boots (3, i think). It is running smooth so far w/quadrant 1622. GPS seems to be getting locks on SATs quickly but you still can't get to LBSTest via the keypad. Still can't write to the external sd when mounted/shared to PC.
Also tried JAC's work (see this thread: [KERNEL/RECOVERY] Vibrant EXT2/3/4 with init.d support) since it has the nifty feature allowing user to put startup scripts on boot up. I flashed his kernel but i got stuck on the 'Vibrant' boot screen. anyways, will give it another try later.
Click to expand...
Click to collapse
Which method do you use for making the ext3? I made my on my hero using Amon RA could that be a problem?

drygmasken said:
Which method do you use for making the ext3? I made my on my hero using Amon RA could that be a problem?
Click to expand...
Click to collapse
I used GParted Live CD as Paragon fails to format my AData card and sorry but I am not familiar with AMON RA.

1646 thanks, very fast!
Sent from my GT-I9000 using XDA App

Would this procedure work for ext4 partitioned SD Card?

[Script][A2SD]Darktremor 2.7.5.3 Beta 04 [DesireZ] (01/29/2011)

Introducing...
Darktremor Apps2SD 2.7.5.3 Beta 04
Date of Release: January 29, 2011
Download Current Version
Instructions - Change Log - Commands - ROM List - Developer's Guide
Darktremor Apps2SD Fan Page ----
Darktremor Apps2SD Development Group
Are you installing Darktremor Apps2SD on your phone? Here are the instructions to help you: Facebook
Are you a developer wanting to include Darktremor Apps2SD in your latest ROM? Here is the Developer Guide: Facebook
Click to expand...
Click to collapse
Update on Beta 4
It seems I'm getting mixed results with these betas. I'm not sure why this is occurring, some people have been able to get this working right while others have had a hard time with it.
Currently, I'm rebuilding the entire program. This takes a while because I have to figure out how to pack all these options into the program but make it small enough to where it will run correctly.
I will say that some of the beta features are coming back out...one of them is the search for a partition code. I suspect that code may be leading me into issues with certain platforms, so I'm going back to the 2.7.5.2 method of mounting (mmcblk0p2 or mmcblk1p2).
Also, parts of the code will use Busybox Ash (the only code that won't will be starta2sd, which will still use Bash for the time being). The startup code will definitely use Busybox Ash.
Until then, here are the links to the the last two betas and the last official release:
Version 2.7.5.3 Beta 04 - http://www.darktremor.info/files/a2sd/dtapps2sd-2.7.5.3-beta04-signed.zip
Version 2.7.5.3 Beta 03 - http://www.darktremor.info/files/a2sd/dtapps2sd-2.7.5.3-beta03-signed.zip
Version 2.7.5.2-1 - http://www.darktremor.info/files/a2sd/dtapps2sd-2.7.5.2-1-signed.zip
And, if you want past versions, you can view the repository: ftp://dtuser:[email protected] (ignore the smiley face...that's XDA doing that.)
Click to expand...
Click to collapse
Beta 04 took longer than I expected to release. I have done major changes to the code:
1. New commands: convert-ext4 - This will convert your EXT3 partition into EXT4. Just a friendly reminder on this command: Not every rom supports EXT4, so it is possible to go into a boot loop if you switch roms. Use with caution.
2. Reworked convert-ext3 (convert-ext4 gets similar code)...now a flag file is set before the reboot (no conversion is done before the reboot). At load time, the conversion is performed. This takes longer in the reboot process and you may think your phone has locked up...wait about five minutes before doing anything with the phone.
3. Repair is rebuilt...now it uses existing commands to repair the setup (reinstall, remove, cachesd, cachepart, nocache, datasd, nodata). Definitely shrinks the code.
4. Added fix_permissions program to the package. This may help with Superuser issues when using the datasd feature. It is used in reinstall, remove, datasd and nodata.
5. a2sd install is back!!! Both a2sd install and a2sd reinstall do the exact same thing.
6. Dalvik heap code has been shrunk and now creates a file called dalvikheap. Actually, the code has been doing this all along (since about 2.7.5.2, I think), but I never put the code in to use the file.
7. Low Memory Killer code has also been shrunk and uses a file caled dtset_lowmem to set the low memory killer parameter.
8. Replaced Busybox PS function with Toolbox PS. The issue with Busybox PS is that it gives a false reading when I look for android.process.acore (which is the main program when the GUI starts up). If that is present, the program thinks you are trying to run Darktremor without any command line parameters. This was because Busybox would report the process was there when, in reality, it wasn't (validated this when my phone was boot looping.) Toolbox's PS reports the correct setting. This should fix the bootlooping issues some people are experiencing.
9. New commands: usedtbusybox and usedefaultbusybox - these commands may help in diagnosing issues that is may be related to the native Busybox on your rom. a2sd usedtbusybox will use the Busybox that is packaged with Darktremor. a2sd usedefaultbusybox will turn back on the scan behavior of the program introduced in Beta 03.
10. Support for Darktremor Apps2SD version 2.7 and earlier has been discontinued. To upgrade correctly from one of those versions, use version 2.7.5.3 Beta 03b or earlier.
11. Finally fixed stalled boot issues (or at least my tests with several roms says so.)
See the change log for additional details.
You will notice that if the program runs repair and finds a problem, it will correct the issue and reboot. You will see a second reboot when the dalvik-cache clears (this is to fix timing issues with CyanogenMod...I can't control that startup as well as I can other roms). This only happens if repair is ran or you flash a new rom (as repair will realign all data). If you are upgrading from a previous version of Darktremor, you should not see the reboots.
Click to expand...
Click to collapse
This is Darktremor Apps2SD, a multipurpose program that primarily allows a user to execute applications created for the Android OS on their Secure Digital card (with the proper setup...more on that later). But, Darktremor Apps2SD is all about stability. The goal is to be able for all users of the Android OS to be able to take advantage of a method to run their applications from a secure digital card.
But just because the Darktremor Apps2SD is all about stability, doesn't mean it isn't packed with features:
- Move applications (both free and paid) to the Secure Digital card.
- Move Dalvik Cache to run either from your Secure Digital card or from your cache partition and clears the cache on demand.
- Boot Loop Protection: prevents the phone from boot looping in the event the SD card could not be mounted.
- Dalvik JIT for faster performance on Roms which support it.
- User selectable sizes for the Dalvik heap sizes, allowing a user to freely optimize their system.
- Activate a swap partition on your SD card and sets how often the swap partition is utilized.
- Automatically fixes configuration issues.
- Users can check the free space on their SD card and check the installation to make sure all is setup correctly.
- Runs ZipAlign on demand...this makes your programs load faster.
- Built in help system for easy reference of commands.
- All features can also be reversed without repartitioning your Secure Digital card.
- New logging features assists in troubleshooting issues.
- Commands to set the Low Memory Killer feature at boot time. Great for those people who are the "set it and forget it" type.
- And more...
Darktremor Apps2SD is not the same as Froyo Apps2SD. Froyo Apps2SD creates a secure folder on the FAT32 section of your SD card (this is the section that you see when you mount your phone to your computer) and stores the programs there. This is nice as you don't have to do anything special with the phone, but it isn't backwards compatible with older versions of Android (Cupcake, Donut, Eclair) and, because of the way Froyo works, older programs not designed for Froyo will automatically stay on your internal storage (unless you install a program that forces the move to your SD card).
Darktremor Apps2SD takes a different approach. Based on the original CyanogenMod works, Darktremor Apps2SD uses symbolic linking to force Android into moving your applications to the SD card. Because Android will not allow anything to be ran from the FAT32 partition on your SD card (and, in Froyo, it will only allow you to run programs from a special folder), Darktremor utilizes filesystems called EXT2, EXT3 and EXT4. Each one of these filesystems is native to Linux (the operating system running Android), which allows you to run programs from them (same as, say, a computer running Ubuntu). This method is completely compatible with all versions of Android, including Froyo. In fact, you can run both the Darktremor Apps2SD and Froyo Apps2SD at the same time.
Check out the list of Roms that either have Darktremor Apps2SD installed or are compatible with Darktremor Apps2SD. Click on the link labeled ROM List at the top of this message.

What?! Thanks darktremor, used this with my slide, will be testing and update this post asap with feedback.
Just curious though, is this meant for froyo based roms or should it work with gingerbread also?... guess I could test and see. Also do we still need to used the 'a2sd reinstall' and 'a2sd cachesd' commands to install it?
Sent from my T-Mobile G2 using XDA App

will this also work with sense roms?

g1junky said:
will this also work with sense roms?
Click to expand...
Click to collapse
Not sure, that's why we are testing it.

I can't get it to work on CM7 nightly 11 ( That I know of).
Used Clockworkmod to set up the ext partition (which doesn't specify which filesystem so i'm guessing either ext2 or ext3); set partition to 512mb and swap to 0mb.
Card partitioned successfully according to CWM; upon flashing the app2sd.zip the installation goes through all steps and posts that the install was successful even though the little check box by install successful is the only one that is starred. I noticed that during the install the script mounts /system and /data to write to them...not sure if that is affected by GB. I thought I read somewhere that this script was designed to check for ext4.
Hell, idk lol. I nandroided and went for it, these are my findings.
scratch that, there's a part two i missed that involves command line functions in the terminal emulator app. It looks like it's working to me.
Edit2: From what ive moved to /sd-ext so far everything seems to be working. Moved my apps, app data, dalvik cache and /data/data.
So far I havent experienced any data loss when moving /data/data.

There's no reason it shouldn't work with Gingerbread, other than the usual suspect of the rom doesn't launch scripts at boot or doesn't have EXT support.
As for the commands, you shouldn't have to rerun those commands if you are upgrading.
KCRic said:
What?! Thanks darktremor, used this with my slide, will be testing and update this post asap with feedback.
Just curious though, is this meant for froyo based roms or should it work with gingerbread also?... guess I could test and see. Also do we still need to used the 'a2sd reinstall' and 'a2sd cachesd' commands to install it?
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse

Yes, it should. I'm running a Sense UI rom on my Evo and it has 2.7.5.3 Beta 02.
g1junky said:
will this also work with sense roms?
Click to expand...
Click to collapse

I can honestly say that so far everything seems to be working well on my end. Dropped ~100megs of internal space usage and sent it to the sd.
The phone does seem a bit snappier, does this style of app2sd stress the card more than usual?

hmm.
I'm running cm 7 nightly 11, set 512mb, 0mb swap and I think I got everything right. Strangely enough, I keep getting reboots every time i run a command in terminal.
edit: a2sd command*

SWEEET..........
I too can confirm that this works with CM7 Nightly "Gingerbread" sweet, installed the zip file from recovery, QUICK NOTE: Had to mount /system and mount /data in recovery before installing the zip file from sdcard. This is great apps2ext that works with any rom. Now in my titanium back ups it shows three seperate storge locations: internal, SD card and SDCard(a2sd) plus it restored apps I previously had on my ext.2 partition from when I was running Enoms Rom....sweeeeeet.
Also dont forget to run the command in adb shell:
Code:
/system/bin/a2sd cachesd
if you want to move dalvik cache to sd.
UPDATE: internal memory free reads out of 1.37GB Avail. there is 1.28GB FREE and Ive got 77 apps installed right now and about too install a lot more..........
FYI im runnning a 16gb class 10 sd card with a 1024mb ext.2 partition

Most of the code is similar to the previous version. I think the snappiness may be that your SD card is faster than internal storage.
stevencpoynter said:
I can honestly say that so far everything seems to be working well on my end. Dropped ~100megs of internal space usage and sent it to the sd.
The phone does seem a bit snappier, does this style of app2sd stress the card more than usual?
Click to expand...
Click to collapse

Did you type su before you run an a2sd command?
zarskee seven nine said:
I'm running cm 7 nightly 11, set 512mb, 0mb swap and I think I got everything right. Strangely enough, I keep getting reboots every time i run a command in terminal.
edit: a2sd command*
Click to expand...
Click to collapse

Just so everyone knows (may want to add this to the OP you know, so you don't get a million ?'s) these are the commands you HAVE to enter after flashing it in recovery.
Code:
su [ENTER]
cd /system/bin [ENTER]
sh a2sd cachesd [ENTER]
Your phone will reboot and will take a bit to complete - be patient because it's moving all your apps and the dalvik cache.
Notes: Your memory will still drop (not by much) over time because the apps will still store cached memory on the phone. To deal with this use the 'datasd' command to move that info to the sdcard also. Also, use the 'a2sd help' command to find all the functions you can perform with this. If you've used this before then all of this is irrelevant

Was so excited about this , It worked perfectly on CM7 nightly builds but when I went to update the Nightly build from 11 to 12, problems, keep getting reboot, since all my apps including titanium were on EXT, I could not access them, so the modification didn't stick from build to build, had to full data wipe, so I guess I'll be coming back to this when CM7 stable is realeased.

Yah I did. It's a beta on a nightly rom...I'm not surprised that something would be weird. I know it worked sending my dalvik cache to sd for sure, but as far as my apps being reinstalled on sd..im not sure. I followed the directions to the t and i know i didnt skip steps cause i used to use this on my nexus one

joemm said:
Was so excited about this , It worked perfectly on CM7 nightly builds but when I went to update the Nightly build from 11 to 12, problems, keep getting reboot, since all my apps including titanium were on EXT, I could not access them, so the modification didn't stick from build to build, had to full data wipe, so I guess I'll be coming back to this when CM7 stable is realeased.
Click to expand...
Click to collapse
You may have to remove the script in terminal, reinstall the rom than rerun the zip script. I think that should work if you want to keep using this on nightlies

If you change roms (including moving between different nightly builds), you will need to reflash Darktremor.
The only time you don't have to do that is if Darktremor is already added on the rom you are loading. Since CM7 doesn't have Darktremor installed as part of its package, you'll have to reflash each time you change nightly builds.
If you still don't have access to your programs, type a2sd reinstall
My apologies.
zarskee seven nine said:
You may have to remove the script in terminal, reinstall the rom than rerun the zip script. I think that should work if you want to keep using this on nightlies
Click to expand...
Click to collapse

after several days nothing new in this android development section, today i saw something new here, keep your good work, gonna try it when i get home

This is about three months overdue. Unfortunately, job, family and the holiday season got the best of me.
fajarep said:
after several days nothing new in this android development section, today i saw something new here, keep your good work, gonna try it when i get home
Click to expand...
Click to collapse

For me it seems that it doesn't stick. I tried it with cm7, flashed it in recovery and when I booted up to run the commands in terminal they weren't there. No a2sd at all. Guess I could shove all in the ROM prior to flashing and see if that works.

[BUILD] XDAndroid Froyo 2.2.2 FRX06 for CWM Recovery 1.8 (ClockWorkMod)

THIS BUILD IS OUTDATED, CHECK:
http://forum.xda-developers.com/showthread.php?t=1177721
I'd like to "present" my recompilation of XDAndroid FRX06 to work with Neopeek's CWM 1.8
No credit for me, but for all XDAndroid devs and Neopeek &co for this.
It doesn't have any other modifications apart from making it available to install from CWM, so everything that applies to FRX06 is useful here. You're the one to decide if you prefer looped or partitioned installs.
Don't try this if you don't know what you're doing. It's only tested by me, so what I'm looking for are TESTERS. PLEASE READ EVERYTHING CAREFULLY BEFORE DOING ANYTHING.
Normally it would be easy to return to previous state by repartitioning/formatting SD, but who knows. I take no responsability for any damage to your device.
The instructions for installing CWM are in Neopeek's forum. Only points:
1.- My partition schema, for 8Gb SDCard, is:
1st partition: FAT32 (sdcard / Rest)
2nd partition: EXT2 (system / 150MB) Contains /system - the base ROM
3rd partition: EXT2 (data / about 400 MB) Used as device's internal memory. You can use more if you install a lot of non-movable apps, but between 4 and 500 should do.
4th partition: EXT2 (cache / about 100MB) Dalvik's cache. 100 should be enough
I used Minitool Partition Wizard for the partitioning.
2.- Startup.txt, ts-calibration, kernel and modules must be in the same dir as haret.exe, in this case inside "npkboot" dir.
3.-To move in the CWM menu with our Blackys:
Peteflyman said:
I just toggle between "Reboot system now", push "Vol Up" to get directly to "Power off", and then toggle "Vol Down" to get back to "Reboot system now". I just do that a couple of times then "Back menu button enabled" usually shows up. That's it. Hope it works for you guys as well!
Click to expand...
Click to collapse
After the "back menu button enabled" you can use power off button to confirm menu selection. Just select "install zip from sdcard", "choose zip from sdcard" and choose my zip (ofc, don't uncompress it).
4.- You don't need to install Gapps, they're included in the build.
5.- After installed, "reboot system now" and start haret again. Let it work for a while without touching anything until you see PIN or unlock screen to begin using Android.
6.- I'd recommend rebooting a second time before starting to configure everything...
It should work in any device where CWM and XDAndroid work, but the configurations I attach here are for TOUCH HD (Blackstone). If you want to try with other devices, be careful to use the appropiate config files (they shouldn't be difficult to find in your device's forum).
I'm using 1337 kernel & modules from Glemsom's autobuild and it works perfectly with my device, feel free to use the one that suits you better.
Download link:
http://www.megaupload.com/?d=SUBUG5I8
If you have any problem, I'll try to help, but for CWM problems please ask in their forum as you'll find better assistance.

Huh. I guess I'll give it a shot - I cooked a build with CWM & FRX06, was force close city. Tried to fix it, but not hard... Just chalked it up to CWM being crappy since I was able to run FRX06 on dedicated partitions no problem .

if you want to install any other build,or reinstall frx06,go to recovery,choose mounts and storage,then format data,format cache,format system (don't format sdcard for obvious reasons) and then mount data,cache,system,go back and install zip from sd card,choose your zip.
also if you find a build without gapps,go to cyanogenmod.com and grab it there,you should pich gapps for cyanogenmod 6 because that's the froyo build....MDPI or HDPI doesn't matter in our case
many problems are result of gapps missing (some builds come without them,this one doesn't) such as call rejecting or showing black screen instead of lockscreen when you wake the device,so be sure to install them

arrrghhh said:
Huh. I guess I'll give it a shot - I cooked a build with CWM & FRX06, was force close city. Tried to fix it, but not hard... Just chalked it up to CWM being crappy since I was able to run FRX06 on dedicated partitions no problem .
Click to expand...
Click to collapse
Then the only difference you'll notice is that you have CWM recovery Anyway, it works pretty well for me, and since I can now write updater-scripts I'll be able to change things very easily
Edit: Now I only have to learn to compare directories to be able to give incremental updates when FRX07 and so on come out!

Eodun said:
Then the only difference you'll notice is that you have CWM recovery Anyway, it works pretty well for me, and since I can now write updater-scripts I'll be able to change things very easily
Edit: Now I only have to learn to compare directories to be able to give incremental updates when FRX07 and so on come out!
Click to expand...
Click to collapse
i suggest you to take a working build and start swapping things and trying,it's not that hard,you can go @ neopeek and ask there,there are several tutorials i believe
just be sure to use a froyo build for your froyo build

farukb said:
i suggest you to take a working build and start swapping things and trying,it's not that hard,you can go @ neopeek and ask there,there are several tutorials i believe
just be sure to use a froyo build for your froyo build
Click to expand...
Click to collapse
Well, from now I only want to have the /system updated from time to time and identical to XDAndroid if I can.
If I think I can add something of value, I'll make another package to make clear they're different things But for now, I can't add anything (that works)

Eodun said:
Well, from now I only want to have the /system updated from time to time and identical to XDAndroid if I can.
If I think I can add something of value, I'll make another package to make clear they're different things But for now, I can't add anything (that works)
Click to expand...
Click to collapse
you can at least start with
/system
/app (add or remove apps)
/fonts (obvious)
/framework (the "look" of the build is defined here,so if you want your froyo to look like ginger,take some of the ginger files and swap with those in this one)
/media (it'll tell you what to do by itself)
other folders are build regarded and some playing and asking pros is advised here

any screenshots ?

Simon_WM said:
any screenshots ?
Click to expand...
Click to collapse
It's a vanilla Froyo, identical to FRX06, so I didn't think they were needed. Just look at any basic original Froyo install.

Eodun said:
1.- My partition schema, for 8Gb SDCard, is:
1st partition: FAT32 (sdcard / Rest)
2nd partition: EXT2 (system / 150MB) Contains /system - the base ROM
3rd partition: EXT2 (data / about 400 MB) Used as device's internal memory. You can use more if you install a lot of non-movable apps, but between 4 and 500 should do.
4th partition: EXT2 (cache / about 100MB) Dalvik's cache. 100 should be enough
I used Minitool Partition Wizard for the partitioning.
Click to expand...
Click to collapse
Hi Eodun,
Can you pls let us know if you are working with the original microSD 8Gb class2?
Thanks

ypsmav said:
Hi Eodun,
Can you pls let us know if you are working with the original microSD 8Gb class2?
Thanks
Click to expand...
Click to collapse
every card is "original" just the manufacturer is different....eg trandescent cards dont work,what's your card?

ypsmav said:
Hi Eodun,
Can you pls let us know if you are working with the original microSD 8Gb class2?
Thanks
Click to expand...
Click to collapse
Didn't change the sd that came with the device if that's what you mean. It's a Sandisk, can't tell the class

Eodun said:
Didn't change the sd that came with the device if that's what you mean. It's a Sandisk, can't tell the class
Click to expand...
Click to collapse
If it has no C2, C4 etc then it's a "classless" card. I have several, seems any card below 2gig that was sold before a certain time are classless.

arrrghhh said:
If it has no C2, C4 etc then it's a "classless" card. I have several, seems any card below 2gig that was sold before a certain time are classless.
Click to expand...
Click to collapse
Well, I can't tell because I'm in android now and can't extract it XD Never had the curiosity to check.
Let me see... Yeah, it has a "2" inside sort of a "C", so it must be a C2 8Gb SanDisk MicroSDHC lol

Working on FRX07 update.zip to test if it works with CWM

Hi Eodun,
Looking forward to the FRX07 CWM!
Do you think that it is required that Neopeak updates the roofts to the latests version?
regarding your FRX06 CWM, I have a quick question. It is possible to use my old data.img from the normal FRX06?
I guess that it may be possible to copy it on the data EXT2 partition but I can't access via windows XP.
Also tried restoring using CWM (I did a backup and replaced the data.img), but I get a checksum error. Any way to change the checksum to be able to do it?
Thanks in advance

ypsmav said:
Hi Eodun,
Looking forward to the FRX07 CWM!
Do you think that it is required that Neopeak updates the roofts to the latests version?
Click to expand...
Click to collapse
helicopter88 is already working on that
ypsmav said:
regarding your FRX06 CWM, I have a quick question. It is possible to use my old data.img from the normal FRX06?
I guess that it may be possible to copy it on the data EXT2 partition but I can't access via windows XP.
Also tried restoring using CWM (I did a backup and replaced the data.img), but I get a checksum error. Any way to change the checksum to be able to do it?
Thanks in advance
Click to expand...
Click to collapse
I don't think so. But if you backup everything with titanium backup and then restore apps, appdata and system settings (only those that appear in green) you'll have everything as before.

Eodun said:
Working on FRX07 update.zip to test if it works with CWM
Click to expand...
Click to collapse
Dude, you don't need to work on anything.
Just grab the FRX07 update.zip from XDAndroid and you're golden... stine makes updates for recovery, which should work fine for CWM.

arrrghhh said:
Dude, you don't need to work on anything.
Just grab the FRX07 update.zip from XDAndroid and you're golden... stine makes updates for recovery, which should work fine for CWM.
Click to expand...
Click to collapse
Confirm it updates correctly, but there are some problems with the old Kernel/rootfs.
I can't get wifi to work and I can't turn the device off.
The 20110716 Kernel is not working for Blackstone Topaz.
We need to wait...

ypsmav said:
Confirm it updates correctly, but there are some problems with the old Kernel/rootfs.
I can't get wifi to work and I can't turn the device off.
The 20110716 Kernel is not working for Blackstone Topaz.
We need to wait...
Click to expand...
Click to collapse
@arrrghhh: Yeah, I know the update is available, but ypsmav noticed the problem: I need the new rootfs for CWM, and I'm not able to adapt it. As I said, work is being done for that.
Thanks for your replies
Ps It will be a big problem if latest kernel doesn't boot. I haven't been able to boot with it. Edit: But still have to check if it boots with a clean data.

Blackout ICS Incredible v3.0.0 - No Music, No files in gallery, no FM radio

Hi,
As i mentioned in topic, music not take in to account from sd also gallery, and fm radio doesnt work
I did full wipe, fix permission, reinstall rom 3 times.... and still the same effect
Have you have some idea ?

vvojtek said:
Hi,
As i mentioned in topic, music not take in to account from sd also gallery, and fm radio doesnt work
I did full wipe, fix permission, reinstall rom 3 times.... and still the same effect
Have you have some idea ?
Click to expand...
Click to collapse
I finally manage gallery and music, I had to format SD card... and recreate manually music folder. For gallery it was enough toke picture and dcmi folder recreated.
Still problem with radio, after plug headphones, told me headphones not plugged etc... any idea ?

Sorry, but...
Is there any way for me (I have registered only for this purpose, otherwise I'm a pretty read only guy and mostly finding the answers otherwise) to post a question about the installation failure of this ROM?
I use 4EXT recovery, done a full wipe (have been using many versions on this and my previous devices so not a completely noob user I guess ), and installer appears to be finishing successfully - but then in the log there are two lines showing it wasn't successful after all:
"mount: failed to mount /dev/block/mmcblk0p26 at /data: Device or resource busy"
and
"error: file_write: write: I/O error
Installer Error (Status 1)"
Now what can the cause be?
Oh, I forgot: have checked the md5sum and was correct (I mean throughout recovery on the SD after the zip was copied to the SD...
Again: sorry but not allowed to post at the ROM's thread...

Totyasrac said:
Is there any way for me (I have registered only for this purpose, otherwise I'm a pretty read only guy and mostly finding the answers otherwise) to post a question about the installation failure of this ROM?
I use 4EXT recovery, done a full wipe (have been using many versions on this and my previous devices so not a completely noob user I guess ), and installer appears to be finishing successfully - but then in the log there are two lines showing it wasn't successful after all:
"mount: failed to mount /dev/block/mmcblk0p26 at /data: Device or resource busy"
and
"error: file_write: write: I/O error
Installer Error (Status 1)"
Now what can the cause be?
Oh, I forgot: have checked the md5sum and was correct (I mean throughout recovery on the SD after the zip was copied to the SD...
Again: sorry but not allowed to post at the ROM's thread...
Click to expand...
Click to collapse
Theres a known bug in the aroma script. Youll have to select "perform a full wipe" in aroma and not tick the reboot checkbox that shows up when flashing is done. Then all should be fine
Script will be fixed in future releases. Sorry for the inconvenience

Mikenif said:
Theres a known bug in the aroma script. Youll have to select "perform a full wipe" in aroma and not tick the reboot checkbox that shows up when flashing is done. Then all should be fine
Script will be fixed in future releases. Sorry for the inconvenience
Click to expand...
Click to collapse
Cheers - I'll give this method a shot right away
EDIT: Apparently this way it worked... Thanks again!

Totyasrac said:
Cheers - I'll give this method a shot right away
EDIT: Apparently this way it worked... Thanks again!
Click to expand...
Click to collapse
Youre welcome Enjoy!
@vvojtek
FM Radio is a known issue. Will be solved in the next update

Mikenif said:
Youre welcome Enjoy!
@vvojtek
FM Radio is a known issue. Will be solved in the next update
Click to expand...
Click to collapse
Thanks
btw.
I have and also others guys problem with "metalic" sound during the conversation, sound is strange comparison for stock rom and ICS AOKP 8.5.
Radio : 12.56.60.25U_26.10.04.03_M
Anyway I have to say again very very good job with this ROOM

in my dhd,music and gallery work well so i think that maybe your sd card need formated.
the same thing is that fm doesn't work,it's universal.

How to flash rom?
Can you guys include some basic steps on how to flash this rom?
My DHD is currently on the Revolution HD rom.

JonCYY said:
Can you guys include some basic steps on how to flash this rom?
My DHD is currently on the Revolution HD rom.
Click to expand...
Click to collapse
its real easy all you have to do is place the rom on your sdcard, coming from another rom I would do a full wipe you can use ARHD superwipe and then flash the rom in recovery.

JonCYY said:
Can you guys include some basic steps on how to flash this rom?
My DHD is currently on the Revolution HD rom.
Click to expand...
Click to collapse
I'm assuming you know how to get in recovery.
Full wipe:
Wipe data/factory reset.
Wipe dalvik
Format all partitions (except sd card).
If you want to go that extra mile, check the md5 checksum to see if it matches right after downloading, before wiping. Do the full wipe, then go wherever you downloaded the rom, flash it. First boot with all roms, is on averqge 5 minutes. If you reach 10 minutes, then something went wrong. Make sure you make a backup of your rom in case anything wrong happens.
Edit: with this rom and only this one - and only this version since it will probably get fixed in the next one, when you are in aroma installer, choose the full wipe. When it prompts you to reboot, say no, and reboot manually. Do not download from dev host. Use one of the mirrors.
Sent from a dream.

So basically when installing this ROM (as of now) to make sure it succeeds all should select to
- wipe throughout the Aroma installer
- select NO to reboot from within the Aroma installer.
Otherwise it doesn't really matter whether you use CWM or 4EXT or any other (Aroma-capable) recovery...
Another issue:
After half a day of awesomeness I ran into the "try to send an SMS and lose your data network" problem described earlier in the original topic the following way (originally Posted by yankee_pr):
"hello!
when sending or receiving mms my data disconnects and signal drops completely to nothing at all then back up to full bars until data connects then back to nothing and so on. this goes on for about a minute. I'm not able to send or receive. when receiving i just get a message trying to download the attachment."
After rebooting or erasing the root_of_cause MMS that I wanted to be sent I went to check APN settings,and figured it wasn't the correct one (for the internet not for the MMS!!!). I have changed it back to the good ones, rebooted and voila.
To be honest I have no clue if the settings were correct beforehand (since installation until it went wrong) so if anyone could check this the community would really appreciate I guess
So 2do:
1. check internet APN settings while it's workin'.
2. Try to send an MMS (like a picture to someone via messages)
3 Wonder why no mobile net connection is available
4. Check if the APN settings are the same or have changed throughout the process
Sorry again but I can post issues here only about this ROM :-o

Gallery and music issues
For those of you that encounter problems of having trouble finding your gallery and music, but yet those files are still in you SD card
Follow instructions below:
1. Plug your phone to your PC
2. Use the search function on your PC and search your SD card for ".nomedia"
3. Delete all
4. Reboot your phone
TADA!!!

[Q] int2ext and read-only filesystem

Hello,
I was using Marvellous Sense 3.5 ROM with increased internal memory by int2extv2.
But I like CyanogenMod on other phone, where many more things could be customized so I have installed this ROM: [rom][unofficial][4.2.2][cm10.1] with Gapps, which is working fine. However after installing int2extv2 nothing happens.
Using RootBrowser I found that autorun file (/etc/init.d/40int2ext) is empty. I tried to remove that file and copy/paste from SD card. But the result is the same (file is created with 0 size). Then I connected to phone with adb shell where I found that the filesystem is read-only, so I decided to make the same things in recovery.
In recovery using adb shell I mounted system blokdevice (read-write), but I was not able to create 40int2ext file (not enough space). I deleted one ringtone and finally 40int2ext script was created (This probably is not the right method, because right now adb shows "unauthorized" device).
After reboot my device shows more internal memory, but I am not able to install any app (no more space). What is the reason? Read-only system? I tried some other 4.2 android ROM, but I was not able to enable int2ext scritp. Does Android 4.2 is compatible with int2ext script?
Sorry about this long post. Tried to post under ROM thread, but I have no enough post written

krogon said:
Hello,
I was using Marvellous Sense 3.5 ROM with increased internal memory by int2extv2.
But I like CyanogenMod on other phone, where many more things could be customized so I have installed this ROM: [rom][unofficial][4.2.2][cm10.1] with Gapps, which is working fine. However after installing int2extv2 nothing happens.
Using RootBrowser I found that autorun file (/etc/init.d/40int2ext) is empty. I tried to remove that file and copy/paste from SD card. But the result is the same (file is created with 0 size). Then I connected to phone with adb shell where I found that the filesystem is read-only, so I decided to make the same things in recovery.
In recovery using adb shell I mounted system blokdevice (read-write), but I was not able to create 40int2ext file (not enough space). I deleted one ringtone and finally 40int2ext script was created (This probably is not the right method, because right now adb shows "unauthorized" device).
After reboot my device shows more internal memory, but I am not able to install any app (no more space). What is the reason? Read-only system? I tried some other 4.2 android ROM, but I was not able to enable int2ext scritp. Does Android 4.2 is compatible with int2ext script?
Sorry about this long post. Tried to post under ROM thread, but I have no enough post written
Click to expand...
Click to collapse
which Gapps did you flash??

csoulr666 said:
which Gapps did you flash??
Click to expand...
Click to collapse
Firstly sorry for wrong link. Name of ROM is correct, but LINK is redirecting to another one. I have installed this ROM: [rom][unofficial][4.2.2][cm10.1] (25.10.2013)
About Gapps version: 20130812 (from http://goo.im/gapps it is correct for CM10.1 and Android 4.2)

krogon said:
Firstly sorry for wrong link. Name of ROM is correct, but LINK is redirecting to another one. I have installed this ROM: [rom][unofficial][4.2.2][cm10.1] (25.10.2013)
About Gapps version: 20130812 (from http://goo.im/gapps it is correct for CM10.1 and Android 4.2)
Click to expand...
Click to collapse
That's what you did wrong...... Internal storage of our phones isn't big enough for the complete gapps package for Android 4.1 and above, use a stripped down version of them found in the thread

You are right, I missed that thing. Now it is working. Thanks.
BTW. Do you know what is the difference between gapps-jb-20130301-lite.zip (34,5MB) and gapps-jb-20130301-light.zip (8.26MB)?

krogon said:
You are right, I missed that thing. Now it is working. Thanks.
BTW. Do you know what is the difference between gapps-jb-20130301-lite.zip (34,5MB) and gapps-jb-20130301-light.zip (8.26MB)?
Click to expand...
Click to collapse
Just a few apps added and removed here and there, see which one you require by trying them