Develop Bugs

[Guide][How To] Adding Brightness Bar Slider to Status Bar

++++++++++++++++++++++++++++++++++
UPDATED July 10, 2013: This GUIDE was written back for ICS firmware, although it might still work for JB - I couldn't confirm that due to the fact I had stopped developing/modding. Keep in mind you need to use the latest APKtool - From Here - for JB system. Also don't forget to copy from original apk "AndroidManifest.xml" file and "META-INF" folder for the New "modded" SystemUI.apk to work.
++++++++++++++++++++++++++++++++++
I was helping a member learn how to add the brightness bar slider to his/her status bar. Since I spend a good amount of time typing it up. So I might as well post it here for everyone
General Knowledge
LEARN how to decompile/Compile APK
APK Tool I used APK 1.5.0
Click to expand...
Click to collapse
PART I: Download resource file here: SystemX.zip
Decompile your SystemUI
Copy from the file/folder in SystemX to same location on your SystemUI:
icon: /res/drawable-hdpi/quickpanel_brightness_icon.png
(could be different folder based on your device, where ever your toggle icons put it there)
file: res/layout/quickpanel_brightness_settings.xml
folder: /smali/com/android/systemui/statusbar/quickpanel folder
PART II: Now you need to declare all added variants:
Ids - Open /res/values/ids.xml - Add these three lines at the end. Close & save.
Code:
<item type="id" name="title">false</item>
<item type="id" name="brightness_slider">false</item>
<item type="id" name="automatic">false</item>
Strings - Open /res/values/strings.xml - Add these two lines at the end. Close & save.
Code:
<string name="brightness_settings_title">Brightness</string>
<string name="brightness_settings_automatic">Fixed</string>
Public - Open /res/values/public.xml - Add to end of each section - Continue with the last id called out.
Code:
....
<public type="drawable" name="quickpanel_brightness_icon" id=[color=red]"0x7f020166"[/color] />
....
<public type="layout" name="quickpanel_brightness_settings" id=[color=red]"0x7f03001e"[/color] />
...
<public type="string" name="brightness_settings_title" id=[color=red]"0x7f08009e"[/color] />
<public type="string" name="brightness_settings_automatic" id=[color=red]"0x7f08009f"[/color] />
...
<public type="id" name="title" id=[color=red]"0x7f0e009d"[/color] />
<public type="id" name="brightness_slider" id=[color=red]"0x7f0e009e"[/color] />
<public type="id" name="automatic" id=[color=red]"0x7f0e009f"[/color] />
*Change those in red per your ids - best open public.xml in Excel, sort by id - you will see the last number was used in each section.
PART III: Now we need to edit the Smali associated with your Public.xml Id's:
Open /smali/com/android/systemui/statusbar/quickpanel/BrightnessSettingsView.smali in Notepad++ (or similar) - Change if needed:
@ line 201
Code:
const v1, [color=red]0x7f08009e[/color]
ID associated with public.xml string section name="brightness_setting_title"
@ line 207
Code:
const v1, [color=red]0x7f08009f[/color]
ID associated with public.xml string section name="brightness_settings_automatic"
@ line 257
Code:
const v1, [color=red]0x7f0e009d[/color]
ID associated with public.xml id section name="title"
@ line 267
Code:
const v1, [color=red]0x7f0e009e[/color]
ID associated with public.xml id section name="brightness_slider"
@ line 308
Code:
const v1, [color=red]0x7f0e009f[/color]
ID associated with public.xml id section name="automatic"
Save & Close.
Open /smali/com/android/systemui/statusbar/phone/PhoneStatusBar.smali in Notepad++ (or similar)
Find this Section:
Code:
....
.method protected makeStatusBarView()Landroid/view/View;
.locals 13
.prologue
const/16 v12, 0x8
.....
[i](very long find the last line in this section)[/i]
.....
[color=blue].line 382
return-object v4[/color]
.line 311
.end local v2 #filter:Landroid/content/IntentFilter;
.end local v6 #signalCluster:Lcom/android/systemui/statusbar/SignalClusterView;
.end local v7 #statSysNoSim:Landroid/widget/ImageView;
.end local v8 #tickerView:Lcom/android/systemui/statusbar/phone/TickerView;
:catch_0
move-exception v9
goto/16 :goto_0
.end method
.method onBarViewAttached()V
......
In between .line 382 (this line number is not important - ignore whatever it is, only make sure it's the last line in this section) and return-object v4 - Add:
Code:
[color=indigo][color=blue].line 382[/color]
const v6, [color=red]0x7f03001e[/color]
invoke-static {v0, v6, v11}, Landroid/view/View;->inflate(Landroid/content/Context;ILandroid/view/ViewGroup;)Landroid/view/View;
move-result-object v5
check-cast v5, Lcom/android/systemui/statusbar/quickpanel/BrightnessSettingsView;
invoke-virtual {v5}, Lcom/android/systemui/statusbar/quickpanel/BrightnessSettingsView;->init()V
iget-object v6, p0, Lcom/android/systemui/statusbar/phone/PhoneStatusBar;->mExpandedView:Lcom/android/systemui/statusbar/phone/ExpandedView;
const/4 p0, 0x1
invoke-virtual {v6, v5, p0}, Lcom/android/systemui/statusbar/phone/ExpandedView;->addView(Landroid/view/View;I)V
[color=blue]return-object v4[/color][/color]
ID associated with public.xml layout section name="quickpanel_brightness_settings"
Note: If you already had Toggle Mod - It should look like this:
Code:
[color=blue].line 382[/color]
iget-object v9, p0, Lcom/android/systemui/statusbar/phone/PhoneStatusBar;->mBroadcastReceiver:Landroid/content/BroadcastReceiver;
invoke-virtual {v0, v9, v2}, Landroid/content/Context;->registerReceiver(Landroid/content/BroadcastReceiver;Landroid/content/IntentFilter;)Landroid/content/Intent;
const v6, 0x7f03001c
invoke-static {v0, v6, v11}, Landroid/view/View;->inflate(Landroid/content/Context;ILandroid/view/ViewGroup;)Landroid/view/View;
move-result-object v5
check-cast v5, Lcom/lidroid/systemui/quickpanel/PowerWidget;
invoke-virtual {v5}, Lcom/lidroid/systemui/quickpanel/PowerWidget;->setupWidget()V
iget-object v6, p0, Lcom/android/systemui/statusbar/phone/PhoneStatusBar;->mExpandedView:Lcom/android/systemui/statusbar/phone/ExpandedView;
invoke-virtual {v6, v5, v11}, Lcom/android/systemui/statusbar/phone/ExpandedView;->addView(Landroid/view/View;I)V
[color=indigo]const v6, [color=red]0x7f03001e[/color]
invoke-static {v0, v6, v11}, Landroid/view/View;->inflate(Landroid/content/Context;ILandroid/view/ViewGroup;)Landroid/view/View;
move-result-object v5
check-cast v5, Lcom/android/systemui/statusbar/quickpanel/BrightnessSettingsView;
invoke-virtual {v5}, Lcom/android/systemui/statusbar/quickpanel/BrightnessSettingsView;->init()V
iget-object v6, p0, Lcom/android/systemui/statusbar/phone/PhoneStatusBar;->mExpandedView:Lcom/android/systemui/statusbar/phone/ExpandedView;
const/4 p0, 0x1
invoke-virtual {v6, v5, p0}, Lcom/android/systemui/statusbar/phone/ExpandedView;->addView(Landroid/view/View;I)V
[color=blue]return-object v4[/color][/color]
Save & Close
PART IV: Compile & push to your system, don't forget to set your permission to rw-r--r-- ! DONE.
The End: That's all - Wasn't that hard, wasn't it ? :silly: .... Good Luck !!! :highfive:
Disclaimer:
I didn't write up the code for quickpanel brightness settings, it has been pass on from forum to forum - I do not know the original author. If it's your please let me know so we all can give proper thanks.
Click to expand...
Click to collapse

+1

+thanks for you.
Yeeeah, I think we need more people like you

thanks for the tutorial.

How would you go about removing the brightness bar (manually)?

fcb13 said:
How would you go about removing the brightness bar (manually)?
Click to expand...
Click to collapse
The quickest way is take out the Added code in the PhoneStatusBar.smali. You can ignore the rest. But it would be more clean if you reverse the guide.

is it working on other phone such samsung or only xperia??

d3cka said:
is it working on other phone such samsung or only xperia??
Click to expand...
Click to collapse
NO, this guide is for Xperia - Samsung had a different layout in SystemUI

Ohh thanks for the answer
Sent from my GT-S5360 using xda premium

can someuone upload the edited SystemUI? I dont have a pc right now only phone

Awesome work.

Worked for me. Can't say anything changes in touchscreen sensitivity, it was fine before. But the capacitive buttons were always kind of a pain in the .ss, now they respond much better. Thanks a lot for this mod. Xperia Ion.

My phone doesn't have phonestatusbar.smali
Sent from my XT530 using xda app-developers app

I don' t know if this work.
I have a problem, decompile e recompile SystemUI.apk without an error, but when use SystemUI recompileted it's don't work.
Can Someone help me?

Where I should add line from part III? In file extracted from systemX.zip I have no one "line" with needed id.
Oh, it was my mistake - i searched for ".line"
Thank you for this guide!

great tutorial:good:

+1 thanks
Sent from my LT26i using xda app-developers app

I wanna add the slider in 2.3 but i could not find phonestatubar.smali
what can I do?

i think you can code a patch to help every body

Great tutorial! thanks!
on other manufacturers phones, it is /smali/com/android/systemui/statusbar/StatusBarService.smali

[MOD][How to] Extended power menu I9505G MFD - Google Edition

This is just a quick how to. Spend a few hours writing this yesterday (see - post and post.) The GlobalActions$SinglePressAction.smali part is from Cristiano Matos Thanks bro! The rest I put together from trail and error. Feel free to use it, a thanks and some credit would be cool. Enjoy. Also huge shout out to my team mate @Mr Impossible for fixing my error. Thanks Bro!!
Flashable zip - http://d-h.st/Hnt
For developers, if you would like to see the diff you can see them on my github:
https://github.com/Infamous-Project...mmit/aaaf80b286686828dce83a3ad5e636edcaeb6fd3 and https://github.com/Infamous-Project...mmit/dc6612b16319a704e1f858097dcc934c8c647f2f
First you need to decompile the framework-res.apk and navigate and open res/values/layouts.xml and add this to the bottom.
Code:
<item type="layout" name="keyguard_transport_control">false</item>
This will fix the compile error that you get from the stock framework-res.
Now you need to add the strings and the icon for reboot since stock there are none. Navigate to res/values/strings.xml and add
Code:
<string name="reboot">Reboot menu</string>
Now you need to add the icon to res/drawable-xhdpi/ic_lock_reboot.png (I will attach it later). Now compile the framework-res.apk then decompile it again. We do this so the apktool will add these to the public.xml and assign ID's to them that we will need later. You can put the new compiled framework aside to add to your ROM later.​
Now we will move to the android.policy.jar. You will need decompile the classout. Now go to classout/com/android/internal/policy/impl/GlobalActions.smali and find
Code:
invoke-virtual {v0, v1}, Ljava/util/ArrayList;->add(Ljava/lang/Object;)Z
iget-object v0, p0, Lcom/android/internal/policy/impl/GlobalActions;->mItems:Ljava/util/ArrayList;
iget-object v1, p0, Lcom/android/internal/policy/impl/GlobalActions;->mAirplaneModeOn:Lcom/android/internal/policy/impl/GlobalActions$ToggleAction;
invoke-virtual {v0, v1}, Ljava/util/ArrayList;->add(Ljava/lang/Object;)Z
Code:
invoke-virtual {v0, v1}, Ljava/util/ArrayList;->add(Ljava/lang/Object;)Z
[COLOR="Blue"]+
+ new-instance v1, Lcom/android/internal/policy/impl/GlobalActions$99;
+
+ const v2, 0x1080c11 (This is the ID for the Ic_lock_reboot we added to framework-res. add yours)
+
+ const v3, 0x10408eb (this is the String ID for reboot)
+
+ invoke-direct {v1, p0, v2, v3}, Lcom/android/internal/policy/impl/GlobalActions$99;-><init>(Lcom/android/internal/policy/impl/GlobalActions;II)V
+
+ invoke-virtual {v0, v1}, Ljava/util/ArrayList;->add(Ljava/lang/Object;)Z
+[/COLOR]
iget-object v0, p0, Lcom/android/internal/policy/impl/GlobalActions;->mItems:Ljava/util/ArrayList;
iget-object v1, p0, Lcom/android/internal/policy/impl/GlobalActions;->mAirplaneModeOn:Lcom/android/internal/policy/impl/GlobalActions$ToggleAction;
invoke-virtual {v0, v1}, Ljava/util/ArrayList;->add(Ljava/lang/Object;)Z
Also pro tip: ID's for apps will be in this format 0x01080c11 and in the android.policy.jar is 0x1080c11. Notice that in the android.policy.jar the 0 after the x is removed. 0x01080c11. So when you are comparing remove the 0 if pulling from the public.xml or if you if you are taking from the android.policy.jar you will need to add it to match up.
​
This part is from Cristiano Matos Thanks bro!
classout/com/android/internal/policy/impl/GlobalActions$SinglePressAction.smali
Find this
Code:
.end annotation
# instance fields
.field private final mIconResId:I
.field private final mMessage:Ljava/lang/CharSequence;
.field private final mMessageResId:I
And between .end annotation and # instance fields, add this
Code:
[COLOR="Blue"]# static fields
.field protected static rebootMode:I
.field protected static final rebootOptions:[Ljava/lang/String;[/COLOR]
Find this
Code:
# direct methods
.method protected constructor <init>(II)V
.registers 4
.parameter "iconResId"
.parameter "messageResId"
And between # direct methods and .method protected constructor <init>(II)V, add this
Code:
[COLOR="Blue"].method static constructor <clinit>()V
.registers 3
const/4 v0, 0x3
new-array v0, v0, [Ljava/lang/String;
const/4 v1, 0x0
const-string v2, "Reboot"
aput-object v2, v0, v1
const/4 v1, 0x1
const-string v2, "Download"
aput-object v2, v0, v1
const/4 v1, 0x2
const-string v2, "Recovery"
aput-object v2, v0, v1
sput-object v0, Lcom/android/internal/policy/impl/GlobalActions$SinglePressAction;->rebootOptions:[Ljava/lang/String;
return-void
.end method[/COLOR]
Last you need to add the files GlobalActions$99.smali, GlobalActions$99$1.smali, and GlobalActions$99$2.smali to Classout/com/android/internal/policy/impl then recomplie the Classout.​

mine

Nice
Sent from my SGH-M919 using xda premium

Thanks bro!
Sent from my dark hole called an office.

Screenshots
Sent from my dark hole called an office.

It works by the way if anyone is wondering

Could someone please make a flashabls zip for the GPe ROM of Jamal? Would be really awesome!
Me Gusta!

Here is a flashable zip
http://d-h.st/Hnt
Sent from my dark hole called an office.

Jamison904 said:
Here is a flashable zip
http://d-h.st/Hnt
Sent from my dark hole called an office.
Click to expand...
Click to collapse
Sweet thx man. ..
Sent from my SGH-M919 using Tapatalk 4 Beta

I flashed the zip and the power menu has not changed. Can anyone confirm that the zip works?

TheAvatar said:
I flashed the zip and the power menu has not changed. Can anyone confirm that the zip works?
Click to expand...
Click to collapse
Works perfectly for me. Are you using deodexed or odexed?
Sent from my GT-I9505 using xda premium

Odexed, might flash a deodexed ROM later today

works perfectly on my De-Oxdexed GE Rom !!!

Since you've already figured this one out.... do you also know where/how to change hardware key configuration to stock TW?

Thanks for the guide & the flashable zip.
Would love to see a write up for center clock, %batterymod.. would be great to have guides in a centralized location.

Thanks... It works perfect
Sent from my GT-I9505G using Tapatalk 2

Thanks
Sent from my GT-I9505 using Tapatalk 4 Beta

Thanks, i think modifying the toggles in notification should be closer now. Or is someone already started on that.

I think someone is already working on that. One of the threads in the app section has a lot of mods running already. Would be nice to have the function toggle like the TW ROMs. That gives me an idea.
Thanks
Sent from my dark hole called an office.

@Jamison904 forgot to hit thanks on OP
you know i've actually seen people using your framework and not give credit for using this mod? rofl the ways of xda baffle me

[Mod][Guide]I9500 4.4.2 4way Reboot

4Way Reboot Guide I9500 4.4.2​
Hey guys im back because there are to many ready made mods and not enough upto date how to guides for 4.4.2 I9500. First of all this is not my work its from @majdinj guides from his amazing thread Here All i have done it make the necessary edits to make his guide work on our 4.4.2 i9500 devices. So if you want to thank someone for this guide then go to majdinj's thread and thank him.
First of all i have not come here to teach you how to decompile .apks and .jar, if your reading this guide then i would hope you already have this knowledge and please dont let the first post say "can you make a flashable zip" as im trying to get you guys to dive in and have a go as its not very hard to build mod
As i have said all credit goes to @majdinj
For this mod we will be dealing with android.policy.jar so go get if from your /system/framework/ and decompile it
android.policy.jar
Open classout folder and go to \com\android\internal\policy\impl\ and place these files from this edited resource zip
Now Find and Open GlobalActions.smali and look for
Code:
new-instance v0, Lcom/android/internal/policy/impl/GlobalActions$8;
const v1, 0x10809bb
const v2, 0x10401d6
invoke-direct {v0, p0, v1, v2}, Lcom/android/internal/policy/impl/GlobalActions$8;-><init>(Lcom/android/internal/policy/impl/GlobalActions;II)V
And replace what is in Red
Code:
new-instance v0, Lcom/android/internal/policy/impl/GlobalActions$[COLOR="Red"]99[/COLOR];
const v1, 0x10809bb
const v2, 0x10401d6
invoke-direct {v0, p0, v1, v2}, Lcom/android/internal/policy/impl/GlobalActions$[COLOR="red"]99[/COLOR];-><init>(Lcom/android/internal/policy/impl/GlobalActions;II)V
iput-object v0, p0, Lcom/android/internal/policy/impl/GlobalActions;->mRestart:Lcom/android/internal/policy/impl/GlobalActions$SinglePressAction;
Save that and move onto GlobalActions$SinglePressAction.smali
Add Code in Red
Code:
[COLOR="Red"]# static fields
.field protected static rebootMode:I
.field protected static final rebootOptions:[Ljava/lang/String;[/COLOR]
# instance fields
Now still in GlobalActions$SinglePressAction.smali look for the code "# direct methods" and add code in Red
Code:
# direct methods
[COLOR="Red"].method static constructor <clinit>()V
.registers 3
const/4 v0, 0x4
new-array v0, v0, [Ljava/lang/String;
const/4 v1, 0x0
const-string v2, "Reboot"
aput-object v2, v0, v1
const/4 v1, 0x1
const-string v2, "Hot Reboot"
aput-object v2, v0, v1
const/4 v1, 0x2
const-string v2, "Download"
aput-object v2, v0, v1
const/4 v1, 0x3
const-string v2, "Recovery"
aput-object v2, v0, v1
sput-object v0, Lcom/android/internal/policy/impl/GlobalActions$SinglePressAction;->rebootOptions:[Ljava/lang/String;
return-void
.end method[/COLOR]
.method protected constructor <init>(II)V
If you want to replace header Reboot Method Then open GlobalActions$99.smali and search for
Code:
const-string v2, "Reboot Method"
And replace for Header you want
Recompile and your done
As i said this is majdinj guide and he deserves full credit and thanks

just incase

Thanks Buddy
I'll try it later today
I tried many time before and it didn't work
Sent from my GT-I9500

AL_IRAQI said:
Thanks Buddy
I'll try it later today
I tried many time before and it didn't work
Sent from my GT-I9500
Click to expand...
Click to collapse
thanks m8, i put this together because the S4 can use all the help it can get when it comes to guides

Big thanks my friend! :good:
Youre great!
Regards

» Arrow « said:
Big thanks my friend! :good:
Youre great!
Regards
Click to expand...
Click to collapse
Any time m8 hope it helps
Sent from my GT-I9500 using Tapatalk 2

Good work mate.
Sent from my Nexus 5 using XDA Free mobile app

Vivek_Neel said:
Good work mate.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks m8
Sent from my GT-I9500

thanks man thanx :good:

ahmed elhusseny said:
thanks man thanx
Click to expand...
Click to collapse
I see what you did there.
Sent from my Nexus 5 using Tapatalk 2

Vivek_Neel said:
I see what you did there.
Sent from my Nexus 5 using Tapatalk 2
Click to expand...
Click to collapse
what did you mean ?

ahmed elhusseny said:
what did you mean ?
Click to expand...
Click to collapse
Hmm.
I was just telling you to make some useful 10 posts.
Sent from my Nexus 5 using Tapatalk 2

Vivek_Neel said:
Hmm.
I was just telling you to make some useful 10 posts.
Sent from my Nexus 5 using Tapatalk 2
Click to expand...
Click to collapse
hahahahahaha you got me man i'm here from 2012 but i was just downloading , without email or replying but one day i just need to ask a question so i just read the rules and tried to ask in the Discussion

Thats good guide..but is there anything wrong if we achieve the same thing via..xposed?

tollboy said:
Thats good guide..but is there anything wrong if we achieve the same thing via..xposed?
Click to expand...
Click to collapse
Its the difference between forcing your newly updated apks on newest update to give you 4way reboot and adding code so it will naturally give you 4way reboot. Wanam has stopped updating xposed a while ago but if your happy with xposed and any wakelocks it may give then i wont try to change your opinion about xposed
Sent from my GT-I9500

[MOD][GUIDE]Right-side status bar quick settings pulldown

This guide was written based on the Sprint Samsung Galaxy S3 ND8 KitKat stock ROM but with the proper modifications may work for other KitKat ROMs. Please don't ask me to modify this to work with ROM xyz or to compile this for you into a ROM. I won't do it.
Background Info
This guide is based on work orignally written by havocgb here. His code was written for the Sony Xperia Mini and had to be somewhat modified for use on our phones so make sure to drop a thank you over in that thread.
Requirements
apktool 2.0 beta 9 and the knowledge of how to use it. There are various guides on how to use apktool on XDA. Find one and read it. Make sure to read the information on the apktool site as well since some of the options in 2.0 may be different from the guides you find.
A text editor that supports Unix-style text files. I recommend Notepad++.
Files
You'll be working with SystemUI.apk
SystemUI.apk
Decompile SystemUI.apk using apktool.
Open smali\com\android\systemui\statusbar\phone\PhoneStatusBar.smali in your preferred text editor.
Find # instance fields and add .field private mTouchRight:Z on a new line somewhere before # direct methods.
Find # virtual methods and add the following methods ABOVE it:
Code:
.method private interceptOneFingerStatusBarRightTap(Landroid/view/MotionEvent;)V
.locals 4
.param p1, "event" # Landroid/view/MotionEvent;
.prologue
iget-boolean v1, p0, Lcom/android/systemui/statusbar/phone/PhoneStatusBar;->mExpandedVisible:Z
if-nez v1, :cond_1
iget-object v0, p0, Lcom/android/systemui/statusbar/phone/PhoneStatusBar;->mDisplay:Landroid/view/Display;
invoke-virtual {v0}, Landroid/view/Display;->getRotation()I
move-result v1
const v0, 0x1
if-eq v0, v1, :cond_2
const v0, 0x3
if-eq v0, v1, :cond_2
const/high16 v1, 0x44070000
:goto_0
invoke-virtual {p1}, Landroid/view/MotionEvent;->getX()F
move-result v0
cmpl-float v0, v0, v1
if-ltz v0, :cond_0
const/4 v1, 0x1
iput-boolean v1, p0, Lcom/android/systemui/statusbar/phone/PhoneStatusBar;->mTouchRight:Z
goto :goto_1
:cond_0
const/4 v1, 0x0
iput-boolean v1, p0, Lcom/android/systemui/statusbar/phone/PhoneStatusBar;->mTouchRight:Z
:cond_1
:goto_1
return-void
:cond_2
const/high16 v1, 0x44480000
goto :goto_0
.end method
.method private oneFingerStatusBarRightTapFlipToQuickPanel()V
.locals 1
.prologue
iget-boolean v0, p0, Lcom/android/systemui/statusbar/phone/PhoneStatusBar;->mTouchRight:Z
if-eqz v0, :cond_0
invoke-virtual {p0}, Lcom/android/systemui/statusbar/phone/PhoneStatusBar;->flipToSettings()V
:goto_0
return-void
:cond_0
invoke-virtual {p0}, Lcom/android/systemui/statusbar/phone/PhoneStatusBar;->flipToNotifications()V
goto :goto_0
.end method
Take note that the line const/high16 v1, 0x44070000 is a floating-point hexadecimal value that controls the starting point of the quick pulldown zone in pixels when in portrait orientation (in this case, the start point is set at approximately 540 pixels from the left side of the status bar) while the line const/high16 v1, 0x44480000 controls the start point of the pulldown zone when in landscape orientation (this value is approximately 800 pixels from the left side of the status bar). For larger screens or to change the size of the drag zone, you'll want to re-calculate these using a floating-point to hexadecimal conversion.
Locate the portion of code that looks like the following:
Code:
.method public flipToNotifications()V
.locals 10
.prologue
const/high16 v9, 0x3f800000
const/4 v8, 0x0
const-wide/16 v6, 0xc8
const/4 v5, 0x1
const/4 v4, 0x0
On a new line under const/4 v4, 0x0, add iput-boolean v4, p0, Lcom/android/systemui/statusbar/phone/PhoneStatusBar;->mTouchRight:Z
Locate the portion of code that looks like the following:
Code:
.method public flipToSettings()V
.locals 11
.prologue
const-wide/16 v9, 0x15e
const/4 v8, 0x4
const/4 v7, 0x1
const/4 v6, 0x0
const/4 v5, 0x0
On a new line under const/4 v5, 0x0, add iput-boolean v7, p0, Lcom/android/systemui/statusbar/phone/PhoneStatusBar;->mTouchRight:Z
Locate the section of code that looks like the following:
Code:
.method public interceptTouchEvent(Landroid/view/MotionEvent;)Z
.locals 5
.param p1, "event" # Landroid/view/MotionEvent;
.prologue
const/4 v1, 0x0
const/4 v2, 0x1
.line 2973
iget v3, p0, Lcom/android/systemui/statusbar/phone/PhoneStatusBar;->mStatusBarWindowState:I
if-nez v3, :cond_1
.line 2974
invoke-virtual {p1}, Landroid/view/MotionEvent;->getAction()I
On a newline above ABOVE the line invoke-virtual {p1}, Landroid/view/MotionEvent;->getAction()I, add invoke-direct {p0, p1}, Lcom/android/systemui/statusbar/phone/PhoneStatusBar;->interceptOneFingerStatusBarRightTap(Landroid/view/MotionEventV
Locate the method .method public updateExpandedViewPos(I)V and locate the line return-void inside of the method. On a new line above return-void, add invoke-direct {p0}, Lcom/android/systemui/statusbar/phone/PhoneStatusBar;->oneFingerStatusBarRightTapFlipToQuickPanel()V.
Save the file and recompile SystemUI using apktool. Don't forget to re-sign the APK (either use an APK signer if you have a ROM that has 3rd-party system app signatures enabled or copy the AndroidManifest.xml file and META-INF folder from the original to the new APK).
Install to your phone using your preferred method. You should already know this but I'll say it anyway, THIS CANNOT BE INSTALLED LIKE NORMAL SIDE-LOADED APKs. I prefer to reboot to recovery and use ADB to push the file to the system, but you can use whatever method is easiest for you (ie. Aroma file manager, flashable zip, etc.).

Thanks for this. I plan on adding this to Tribute in the near future.

I need help please. I'm having error " [5048,15] no viable alternative at input 'p1' " whenever I compile SystemUI.apk. I'm trying to apply this mod on my N8000. Thanks in advance!

filchi756 said:
I need help please. I'm having error " [5048,15] no viable alternative at input 'p1' " whenever I compile SystemUI.apk. I'm trying to apply this mod on my N8000. Thanks in advance!
Click to expand...
Click to collapse
Try using apktool 2.
Thank you for releasing this guide. Looking forward to adding this to my rom.

talkingmonkeys said:
Try using apktool 2.
Thank you for releasing this guide. Looking forward to adding this to my rom.
Click to expand...
Click to collapse
Ok thanks for the suggestion. I will try that.

Need help please .I manage to solve my problem about compiling but when I install it I'm having systemUI stop(foreclose) message. If you have time if possible please help me check my Phonestatusbar.smali ,in what part did I do wrong I've attach my PhoneStatusBar.smali below. Hope you can help me.Thanks in advance.

filchi756 said:
Need help please .I manage to solve my problem about compiling but when I install it I'm having systemUI stop(foreclose) message. If you have time if possible please help me check my Phonestatusbar.smali ,in what part did I do wrong I've attach my PhoneStatusBar.smali below. Hope you can help me.Thanks in advance.
Click to expand...
Click to collapse
Would need to see a logcat. If you don't know how to pull one and post it here, however, I'd say you're not ready to start implementing mods.

moonknightus said:
Would need to see a logcat. If you don't know how to pull one and post it here, however, I'd say you're not ready to start implementing mods.
Click to expand...
Click to collapse
Ok I will post a logcat when I have access to pc. Yeah I think I'm not ready yet for this kind of mods.But I have some little experience in implementing mods in Jellybean before though(by following others guide too), but having a hardtime with kitkat at the moment. By the way any chance you can share me your phonestatusbar.smali or even the SystemUI.apk with you mod included so I can compare it with mine? I think it not necessary to download the whole rom if I just need one apk and beside I don't have S3. And I have a crappy internet connection. Hope you understand.Thanks!

filchi756 said:
Ok I will post a logcat when I have access to pc. Yeah I think I'm not ready yet for this kind of mods.I have some experience in implementing mods in Jellybean before though(by following others guide too), but having a hardtime with kitkatat the moment. By the way any chance you can share me your phonestatusbar.smali or even the SystemUI.apk with you mod included so I can compare it with mine? I think it not necessary to download the whole rom if I just need one apk and beside I don't have S3. And I have a crappy internet connection. Hope you understand.Thanks!
Click to expand...
Click to collapse
Nope. My ROM has multiple mods so the smali and apk will not help you. Not to mention, my phone is a Galaxy S3.

moonknightus said:
Nope. My ROM has multiple mods so the smali and apk will not help you. Not to mention, my phone is a Galaxy S3.
Click to expand...
Click to collapse
Ok thanks.I'll wait for someone's else help, who implemented this mod of your's and with clear instruction I'm capable of understanding(like the guide of havocgb, it has before and after).Your mod is just new that's means just few people implemented it yet in their rom at the moment.When time come's there will surely be someone out there who will write a clear guide which we amateur's will understand. Thanks again for this guide anyway. Cheers mate!
P.S. I think even we have different gadget as long as they are the same brand(like Samsung) .I think there are a lot of similarities on their content. I successfully made mods for my tablet using guides from Note 2014 and Note pro before by the way .

filchi756 said:
Ok thanks.I'll wait for someone's else help, who implemented this mod of your's and with clear instruction I'm capable of understanding.Your mod is just new that's means just few people implemented it yet in their rom at the moment.When time come's there will surely be someone out there who will write a clear guide which we amateur's will understand. Thanks again for this guide anyway. Cheers mate!
P.S. I think even we have different gadget as long as they are the same brand(like Samsung) .I think there are a lot of similarities on their content. I successfully made mods for my tablet using guides from Note 2014 and Note pro before by the way .
Click to expand...
Click to collapse
There's nothing new about this mod. Was originally written for an Xperia phone by havocgb in March 2013. This is clearly stated in the op. If you are incapable of following instructions, modifying the code to fit your device, and debugging your own code, that is not my fault. FYI, others have already successfully implemented this mod. At least one was on a note device.

moonknightus said:
There's nothing new about this mod. Was originally written for an Xperia phone by havocgb in March 2013. This is clearly stated in the op. If you are incapable of following instructions, modifying the code to fit your device, and debugging your own code, that is not my fault. FYI, others have already successfully implemented this mod. At least one was on a note device.
Click to expand...
Click to collapse
Ok. I'll look for that who implemented it on note(If I get lucky).I'm just looking for a quick solution for this cause I really want to implement this to my gadgets. Thankfully you did not suggest "google is your friend" thing to find solution for your problem.I can't access google, its block in my location(China).Thanks again for the guide.Anyway Cool! peace mate!

filchi756 said:
Ok. I'll look for that who implemented it on note(If I get lucky).I'm just looking for a quick solution for this cause I really want to implement this to my gadgets. Thankfully you did not suggest "google is your friend" thing to find solution for your problem.I can't access google, its block in my location(China).Thanks again for the guide.Anyway Cool! peace mate!
Click to expand...
Click to collapse
There's always Baidu. If I run across the PM, I'll shoot the guy's name over to you. I may have deleted it

moonknightus said:
There's always Baidu. If I run across the PM, I'll shoot the guy's name over to you. I may have deleted it
Click to expand...
Click to collapse
Ok thanks mate .That will be great:good:! If I use baidu in China the results are only from China and in chinese(I don't understand Chinese). I tried it before in Hongkong the results are international and in English.Hope you understand what I meant mate.
P.S. I'm trying your other mod here: http://forum.xda-developers.com/gal...t/mod-enable-heads-notifications-nd8-t2873109 .Lets see if I can implement it successfully:fingers-crossed:.

bro. screenshots show the work of this tutorial..
Sorry for my bad english

please upload the screenshot

[Guide][tut][UP 21/JAN/15] Show/Hide Brightness Slider on notification Quick settings

Hello guys
Happy new Year for first
This is my first tut in This new year 2016
All you need is Deodexed SystemUI.apk and Settings.apk
1. Decompile SystemUI.apk
2. Open SystemUI.apk/smali/com/android/systemui/qs/QSPanel.smali
3. Find this code
Code:
.field private mBrightnessPaddingTop:I
Below that add this code
Code:
.field private mBrightnessSliderEnabled:Z
4. Search for this Method
Code:
.method private setDetailRecord(Lcom/android/systemui/qs/QSPanel$Record;)V
and above that method add this complete method
Code:
.method private isBrightnessSliderEnabled()I
.locals 4
const/4 v3, 0x0
iget-object v0, p0, Lcom/android/systemui/qs/QSPanel;->mContext:Landroid/content/Context;
invoke-virtual {v0}, Landroid/content/Context;->getContentResolver()Landroid/content/ContentResolver;
move-result-object v0
const-string v1, "brightness_slider_show"
const/4 v2, 0x1
invoke-static {v0, v1, v2}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v0
if-eqz v0, :cond_0
const/4 v3, 0x1
:cond_0
iput-boolean v3, p0, Lcom/android/systemui/qs/QSPanel;->mBrightnessSliderEnabled:Z
return v3
.end method
5. Search for this method
Code:
.method private showDetail(ZLcom/android/systemui/qs/QSPanel$Record;)V
Above that method, add this method
Code:
.method private showBrightnessSlider()Z
.locals 5
const/16 v3, 0x8
const/4 v2, 0x0
const v1, 0x7f10012e
invoke-direct {p0}, Lcom/android/systemui/qs/QSPanel;->isBrightnessSliderEnabled()I
move-result v4
invoke-virtual {p0, v1}, Lcom/android/systemui/qs/QSPanel;->findViewById(I)Landroid/view/View;
move-result-object v0
check-cast v0, Lcom/android/systemui/settings/ToggleSlider;
if-eqz v4, :cond_0
iget-boolean v1, p0, Lcom/android/systemui/qs/QSPanel;->mBrightnessSliderEnabled:Z
if-eqz v1, :cond_0
iget-object v1, p0, Lcom/android/systemui/qs/QSPanel;->mBrightnessView:Landroid/view/View;
invoke-virtual {v1, v2}, Landroid/view/View;->setVisibility(I)V
invoke-virtual {v0, v2}, Lcom/android/systemui/settings/ToggleSlider;->setVisibility(I)V
:goto_0
invoke-virtual {p0}, Lcom/android/systemui/qs/QSPanel;->updateResources()V
iget-boolean v1, p0, Lcom/android/systemui/qs/QSPanel;->mBrightnessSliderEnabled:Z
return v1
:cond_0
iget-object v1, p0, Lcom/android/systemui/qs/QSPanel;->mBrightnessView:Landroid/view/View;
invoke-virtual {v1, v3}, Landroid/view/View;->setVisibility(I)V
invoke-virtual {v0, v3}, Lcom/android/systemui/settings/ToggleSlider;->setVisibility(I)V
goto :goto_0
.end method
6. Now Look for this Code
Code:
if-eqz p1, :[COLOR="red"]cond_3[/COLOR]
.line 216
iget-object [COLOR="Red"]v2[/COLOR], p0, Lcom/android/systemui/qs/QSPanel;->mBrightnessController:Lcom/android/systemui/settings/BrightnessController;
Add the code above the .line 216 ( this .line 216 will not be same with all devices )
Code:
invoke-direct {p0}, Lcom/android/systemui/qs/QSPanel;->showBrightnessSlider()Z
move-result [COLOR="red"]v2[/COLOR]
if-eqz [COLOR="red"]v2[/COLOR], :[COLOR="red"]cond_3[/COLOR]
Finally it looks like
Code:
if-eqz p1, [COLOR="blue"]:cond_3[/COLOR]
[COLOR="Red"] invoke-direct {p0}, Lcom/android/systemui/qs/QSPanel;->showBrightnessSlider()Z
move-result [COLOR="blue"]v2[/COLOR]
if-eqz [COLOR="blue"]v2[/COLOR], [COLOR="blue"]:cond_3[/COLOR][/COLOR]
.line 216
iget-object [COLOR="Blue"]v2[/COLOR], p0, Lcom/android/systemui/qs/QSPanel;->mBrightnessController:Lcom/android/systemui/settings/BrightnessController;
After adding that
replace this Public id
<public type="id" name="brightness_slider" id="0x7f10012e" />
6. Now compile the SystemUI.apk and sign it and replace
Now time to add in the settings look for post #2

adding to Settings
Welcome to easy part on adding the option to hide/show in settings
Method 1
1. Decompile the settings.apk
2. Download this View attachment Slider_Settings.zip and merge to your settings
3. Add the below code to your settings ( i had added to my own settings ) and your wish
Code:
<PreferenceScreen android:title="Statusbar Mod" android:key="statusmod" android:fragment="com.android.settings.rz.Statusmod" />
4. Compile it and Decompile and open
Settings.apk/smali/com/android/settings/rz/Statusmod.smali
5. Compare the Public ID and replace it and recompile
6. God you did man,,, now replace and have fun
Method 2
1. Decompile the Settings.apk
2. Download this View attachment settings.zip and merge to your settings
3. Add the below code to your settings ( i had added to my own settings.xml )
you can add in settings.apk/res/xml/Dispaly_settings.xml
HTML:
<com.android.settings.cyanogenmod.SystemSettingSwitchPreference android:title="Brightness Slider" android:key="brightness_slider_show" android:defaultValue="0" android:summaryOn="Brightness Slider Shown" android:summaryOff="Brightness Slider Hidden" />
and then compile/sign and replace your settings
OR
Try download this ROM Control application (View attachment app-release.apk ) where you can Easily control
All you is just install and have fun
Thanks to @daxgirl for the app source ​
now have fun guys
Thanks to cyanogenmod
Dont Forget to mention me if you used my work
that feels me happy

hello venkat ,
I 've implemented a tutor in, but why every time I switch Brightness Hide its always off if i back from settings..
Can you help me to fix it ???

aNgga - Fe Hung said:
hello venkat ,
I 've implemented a tutor in, but why every time I switch Brightness Hide its always off if i back from settings..
Can you help me to fix it ???
Click to expand...
Click to collapse
thanks for identifying this ( even it works the switch turns off)
i had forgot to define the return value of switch
now its fixed
just replace the settings.zip
and everything will be ok

venkat kamesh said:
thanks for identifying this ( even it works the switch turns off)
i had forgot to define the return value of switch
now its fixed
just replace the settings.zip
and everything will be ok
Click to expand...
Click to collapse
still the same as before ny : ' (
Can you help me bro ??

aNgga - Fe Hung said:
still the same as before ny : ' (
Can you help me bro ??
Click to expand...
Click to collapse
Impossible bro
Try from first if in case
I had tested and many of my team too got it working

venkat kamesh said:
Impossible bro
Try from first if in case
I had tested and many of my team too got it working
Click to expand...
Click to collapse
I try with ur new settings smali and still don't working the switch when I enable and then return to desactivate the switch is unable and don't hide the brightness bar

Bro i think that I found the problem I compare the two smali that u update on the hide show album art and this and are the same maybe u forgot to upload the new

raziel zarafan said:
I try with ur new settings smali and still don't working the switch when I enable and then return to desactivate the switch is unable and don't hide the brightness bar
Click to expand...
Click to collapse
raziel zarafan said:
Bro i think that I found the problem I compare the two smali that u update on the hide show album art and this and are the same maybe u forgot to upload the new
Click to expand...
Click to collapse
No way bro
I had updated both of same file
Tested Moor than enough
If not go through my setting bro

Bin thanks for your tut ! Can you do some tuto with navbar tuning ? Appreciate it
Envoyé de mon E6653 en utilisant Tapatalk

After adding that
replace this Public id
<public type="id" name="brightness_slider" id="0x7f10012e" />
bro i dont understand very well , the public id that i need to replace where i can find the new id , i know to i must open res/xml/public and replace the line that u publish but what new id i must put or where i can find it

raziel zarafan said:
After adding that
replace this Public id
<public type="id" name="brightness_slider" id="0x7f10012e" />
bro i dont understand very well , the public id that i need to replace where i can find the new id , i know to i must open res/xml/public and replace the line that u publish but what new id i must put or where i can find it
Click to expand...
Click to collapse
In the method you have const v1 0x7f10012e
Go to you public.xml and serch for <public type="id" name="brightness_slider, and the public id you have copy and change 0x7f10012e for you public id you copy

dark90 said:
In the method you have const v1 0x7f10012e
Go to you public.xml and serch for <public type="id" name="brightness_slider, and the public id you have copy and change 0x7f10012e for you public id you copy
Click to expand...
Click to collapse
The public id and the const value are the same bro .-. And when I replace the systemui and enable hide it don't work T-T

raziel zarafan said:
The public id and the const value are the same bro .-. And when I replace the systemui and enable hide it don't work T-T
Click to expand...
Click to collapse
You are right i tried and didnt work too

dark90 said:
You are right i tried and didnt work too
Click to expand...
Click to collapse
Maybe something is wrong bro

Not working for me too.. I think some problems with the smali file .. Waiting for OP's replay

raziel zarafan said:
The public id and the const value are the same bro .-. And when I replace the systemui and enable hide it don't work T-T
Click to expand...
Click to collapse
dark90 said:
You are right i tried and didnt work too
Click to expand...
Click to collapse
raziel zarafan said:
Maybe something is wrong bro
Click to expand...
Click to collapse
Rajeev said:
Not working for me too.. I think some problems with the smali file .. Waiting for OP's replay
Click to expand...
Click to collapse
Brothers every thing is working
I had already provided my settings
May be issue from settings
I will provide rom control app
Sure it helps you

venkat kamesh said:
Brothers every thing is working
I had already provided my settings
May be issue from settings
I will provide rom control app
Sure it helps you
Click to expand...
Click to collapse
Already compared ur settings and all bro. Not working..

Rajeev said:
Already compared ur settings and all bro. Not working..
Click to expand...
Click to collapse
Don't worry brother
I already had alternate for this to work
On all switch properties tuts of mine
Now just a moment back I fixed my pc
Once done I will update threads

dark90 said:
You are right i tried and didnt work too
Click to expand...
Click to collapse
raziel zarafan said:
Maybe something is wrong bro
Click to expand...
Click to collapse
Rajeev said:
Not working for me too.. I think some problems with the smali file .. Waiting for OP's replay
Click to expand...
Click to collapse
Brothers The Tut got updated
with new settings smali
i tough smali will make you confused so not provided
any how there are three ways and now its your wish
1.Smali
2.Smali with no Id
or the app control