hi plz every one who can help me it very urgent..
i try to upgrade my friend htc hermis but i am stuck in os menu
previusly i install scap rom 3.3
i treid to install the new version it reached 2% and the an error massege appear (connection error) then i tried to do it again but evry time i try the same maasege appear on the phone (coonection error )
it reach 0% and this message appear
i have spl 1.09
i also tried to hard spl it but still the same message ...
i treid different usb and pc but still
i download an official rom the same message
i sleep a see the same f*cking message
plz help me
IT Would help if you Gave the Error Message # for Example If your Getting Error Message 240 It's a Connection Problem.
Try Turning of your Firewall, Have the Rom you are upgrading to in your Root Directory And Always Make sure your Phone is Super CID unlocked.
Hope This Helps.....I"ve been where you were at once... IT was the My Firewall for me.
Try flashing your Operator rom using the SD card method. Or looking at the Unbrick table done by POF. It's all in the WIKI...
halder said:
hi plz every one who can help me it very urgent..
i try to upgrade my friend htc hermis but i am stuck in os menu
previusly i install scap rom 3.3
i treid to install the new version it reached 2% and the an error massege appear (connection error) then i tried to do it again but evry time i try the same maasege appear on the phone (coonection error )
it reach 0% and this message appear
i have spl 1.09
i also tried to hard spl it but still the same message ...
i treid different usb and pc but still
i download an official rom the same message
i sleep a see the same f*cking message
plz help me
Click to expand...
Click to collapse
Try booting in debug mode (hold the Side OK button + power button and reset at the same time)
once you booted into that 4 colored screen with SPL/IPL listed, flash the device with HardSPL 0.7
Link Here
Then upgrade your device again.
using HardSPL it ensures your device will not be overwritten with bad blocks and it enables unsigned rom files to be written to the phone. it's a win-win if you upgrade it.
still the same message 262 update error.
i triecthe hard spl but s6s error always appear
i can go to boot screen
plz if there solution tell me..
its not afirewall fault..
halder said:
still the same message 262 update error.
i triecthe hard spl but s6s error always appear
i can go to boot screen
plz if there solution tell me..
its not afirewall fault..
Click to expand...
Click to collapse
This 262 Error Message I got this
""ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.""
At this Point I"m Stumpped I"m hoping one of the Big Boys Will Step in on this one and give you a better Solution....
yes it reached 2% then it stuck there i treid to reupgrade with the same rom no luck..i tried different rom also ..
do u think if i download a shiped htc rom it will work
halder said:
yes it reached 2% then it stuck there i treid to reupgrade with the same rom no luck..i tried different rom also ..
do u think if i download a shiped htc rom it will work
Click to expand...
Click to collapse
Wam7 has already given the best advice to start unbricking your phone.
1. Get the original Rom which came with your phone. It might be listed here http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades or here http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions. If it is not listed you'll need to search the internet and/or this forum.
2. When you have your original ROM, flash it to your phone from the SD card, not from your computer. Instructions to do this are here http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing. Remember to have a full battery charge before beginning.
Hopefully this will recover your phone. If it does, then make sure that you flash Olipro's HardSPL 2.10 (V7) to your phone http://forum.xda-developers.com/showthread.php?t=296722.
If you get stuck on how to do this correctly, there is some good advice in Mrvanx's upgrade guide http://forum.xda-developers.com/showthread.php?t=299462.
Also, in the future it can help others to help you if you give more information about your phone such as phone type, original ROM, current Rom, Radio version, SPL version etc, etc. Most people include some of this info in their signature so they don't have to keep re-typing it.
thank you very much for replaying...
i tried the sd card method and i download my exact cid rom but still it give the error 0068002 i download more than 5 original shiped rom same message
my phone is htc ...tytn ..not qtek or dopod ....
htc pure
info
r 1.18.00.10
g 32.55.7018.01h
d 3.57
m05 s04 b06
any other solution
i can go to boot menu
plz again
i tried evry possible way to flash my phone but i cannt get it done why??? EROOR 262
i download more than 10 official rom (htc) and i apply the exact sd method steps still it give me 0028002 error
my device is HTC ...BUT HTC WHAT I DONT KNOW...IT JUST HTC ONLY
SO I CANNOT CHOOS MY EXACT CID ROM
PLZ HELP ME OR I WILL THROUGH IT AWAY
plz answer me its very urgent?????
ok i dont want to open a new thread with same question.so if some one plz can help i will be graetful....
i want to knew how to fix error 262
Have you tired flashing from the bootloader?
Have you tired flashing just the rom from mitty ?
Is the phone unlocked? Have you thoroughly read the unbricking thread in the wiki?
WB
i dont know if its unlocked but i flash it with chap 3.7 a then i tried to flash it with chap 4.00 it reach 2% and stoped..ofcouse its unlocked..
it tried the mitty way but it give
level=ff instead of 0
and bad command
it tried the sd card method the error 0068002 or invalid vender id
If you get invalid vendor error doesn't that mean the phone is locked?
since no one helped me here in this thread ...i helped my self..
i found the solution...i send my ID to htc.com and they replay nicey and send me the link to my exact cid rom ..
the problem was my original rom was norway not wwe ..**** who thought that???
anyhow thank you for all who tried to help me..really i benfit from thier method for future desaster???
see u in another problem...
cuz we know nothing we just ask and ask until we find the solution ..
Hi there,
While trying an update (Official 2.3 RUU update that I have downloaded from HTC dev wesite). It stuck in the middle of the upgrade process (Battery issues).
I have a screen error (error 152 as shown on my PC) - the HTC screen shows 4 exclamation marks inside a triangle in the corners (!) and HTC in gray in the middle of the screen (In the RUU window they ask the user to unplug the battery then plug it back again to fix it but it doesn't work for me).
Noice : My device is NOT rooted.
Do I have a dead phone, and is there anyway to fix it?
i have same problem
maybe try to root it and s-off with this tutorial.. http://forum.xda-developers.com/showthread.php?t=1016084
Contact HTC.
Hello,
I have a problem with two HTC Desire, an repairer flashed the boot both with riff box, because both does'nt boot
and wanting to flash a rom for both, and I havec an error message ( the htc logo on a black background), and I thought it was due to the rom flashed was only for amoled desire then mine is SLCD (or otherwise!)
and trying to flash a rom that works with both models I have this error message:
error [110] error opening file
* utility to update the rom can not open the file required files are damaged "
the second ends normally flash but stuck on the green htc logo on a white background, then I would have flashed a alpha spl boot, it accepts, against the reconvery not work although I flashed the cwm and the 4ext touch
What can I do to make them both walk again, or are they simply briqued?!
Thank's
What ruu's did you flash? Try the 2.3 one (sig).
abaaaabbbb63 said:
What ruu's did you flash? Try the 2.3 one (sig).
Click to expand...
Click to collapse
is it available in UCP, because the link on htc dev is in zip format, I installed it , but the first gets stuck on the logo and the second is still black logo then I can't do it with the sd card
Thank's
I tried to install the gingerbread rom but I always have an message error 110 or 152
I tried all this RUU :
RUU_Bravo_Froyo_HTC_WWE_2.09.405.8_Radio_32.43.00.32U_5.09.00.20_release_140022_signed
ruu_bravo_froyo_htc_wwe_2.29.405.2_radio_32.49.00.32u_5.11.05.27_release_151783_signed
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed(1)
RUU_Bravo_HTC_Europe_1.15.405.1_Radio_32.30.00.28U_4.05.00.11_release_121684
RUU_HTC Desire Android 2.3 Upgrade (Gingerbread)
and I found that this problem is an radio brick
There's sombody who some solution ?
Thank's
Hello ...
I have htc one x lock with orginal rom that i flash it from ruu
RUU_ENDEAVOR_U_ICS_40_HTC_ARA_1.29.415.11_Radio_1.1204.105.14_release_260742_signed
and every think is ok until 4 days ago when i was plug-in my htc to the car by aux
suddenly the phone restart and stuck on htc quality brilliant screen .
i tired to reflash it from the same ruu i have but i have alot problem
1- this
^^^^^^^^^i.imgur.com/Uq0jb.png
image version = ???????
2-
^^^^^^^^^^^^^i.imgur.com/p21pK.png
( to see images remove ^^^^^^ )
when i click on next phone boot in black screen with htc but no green bar
when the progress be in updating signature i got error 155 >>>>>
i try to unlock and install custom recovery the flash android revolution but i can't install any think from recovery
factory rest, fastboot erase cache, and flash kernal from hassonny tool kit 1.0, flash hboot but nothing
i still cant useing ruu or intstall some think from recovery
what should i do ?
sorry for the bad english ...
Sometimes the phone freezes and reboots and then I get this message: Send error report to HTC.
I have tried to Factory Reset men i didnt help, the problem comes once a week.
I have stock 4.4.3 rom firmware 2.22.401.4