Related
so, I've been using the miui xj rom for a while with no problems until last night. I had to reboot my phone and after that it just wouldn't start up anymore-it just stuck on the boot screen (the one with the joker-'why so serious' lol )
so what are my options? unfortunately, I don't have a backup, at least not a recent one. is there anyway to fix this problem or do I have to flash a ROM again? right now I can't get anything onto my phone's memory card cause I don't have the micro sd to sd adapter
floramy said:
so, I've been using the miui xj rom for a while with no problems until last night. I had to reboot my phone and after that it just wouldn't start up anymore-it just stuck on the boot screen (the one with the joker-'why so serious' lol )
so what are my options? unfortunately, I don't have a backup, at least not a recent one. is there anyway to fix this problem or do I have to flash a ROM again? right now I can't get anything onto my phone's memory card cause I don't have the micro sd to sd adapter
Click to expand...
Click to collapse
Thats what id do, just boot into recovery, wipe everything and reflash rom
Sent from my HTC Desire
I took a pic of the bootloader screen
what is pb99img anyways?
I don't get it-how did this happen? one minute everything was working just fine, and then this
Mine does that to dont worry bout it
Sent from my HTC Desire
so I went into recovery and selected 'wipe data/factory reset' but nothing happens...all I get is a black screen. does that mean I have to flash a new recovery image first?
floramy said:
so I went into recovery and selected 'wipe data/factory reset' but nothing happens...all I get is a black screen. does that mean I have to flash a new recovery image first?
Click to expand...
Click to collapse
So you can enter the recovery ? Then you need to flash the rom again....my guess ?!
MarcelHofs said:
So you can enter the recovery ? Then you need to flash the rom again....my guess ?!
Click to expand...
Click to collapse
yes..but before flashing a new rom, you should wipe data...and apparently I can't do that now I tried to select 'wipe cache' from the recovery menu and that also doesn't work...
floramy said:
yes..but before flashing a new rom, you should wipe data...and apparently I can't do that now I tried to select 'wipe cache' from the recovery menu and that also doesn't work...
Click to expand...
Click to collapse
U should wipe/factory reset, wipe cache and dalvik. What recovery do u have?
Sent from my HTC Desire
jmcclue said:
U should wipe/factory reset, wipe cache and dalvik. What recovery do u have?
Sent from my HTC Desire
Click to expand...
Click to collapse
alpharev recovery v2.5.1.8
whatever I choose from the recovery menu doesn't work- I tried wipe data/factory reset, wipe cache partition, backup and restore, mounts and storage-I just get a black screen and nothing happens.
so I think I should flash a new recovery image... I found this:
#METHOD 1#
Method One uses Android Flasher to flash the recovery image.
[STEP1]- Poweroff. Hold the BACK button and the POWER button to boot into FASTBOOT mode.
[STEP2]- Download Android Flasher
[STEP3]- Download the recovery image of your choice. Put it in a place you can remember.
[STEP4]- Run android flasher, tick "Recovery", and press "Begin"
[STEP5]- Browse to where you downloaded the recovery image, select it, and press "open"
[STEP6]- Wait for the process to complete.
but it's not really clear what's to be done-does the phone need to be connected to the pc? where do I save android flasher? to the phones memory card? or to the pc?
Yeah download android flasher(pc) and run it, boot your phone into fastboot (back + power) plug in usb. Do u have a recovery img?
Sent from my HTC Desire
jmcclue said:
Yeah download android flasher and run it, boot your phone into fastboot (back + power) plug in usb. Do u have a recovery img?
Sent from my HTC Desire
Click to expand...
Click to collapse
this is killing me I flashed a new recovery-amon ra's-and it said it flashed successfully but I can't navigate through the recovery menu with volume up/down buttons
Send me ur email and il send ya 4ext recovery touch
Sent from my HTC Desire
floramy said:
this is killing me I flashed a new recovery-amon ra's-and it said it flashed successfully but I can't navigate through the recovery menu with volume up/down buttons
Click to expand...
Click to collapse
Lol i just remembered :banghead:
Amon-RA u use the trackball to move hahaha
Sent from my HTC Desire
Hi guys,
I rooted my HOX using this guide http://forum.xda-developers.com/showthread.php?t=1843585 . It went ok.
Then I flashed the jb rom, also went perfect. Because i really like sense i wanted to flash the viper rom, then everything went terribly wrong.
I flashed it and when it finished the device began bootlooping. I pressed the on/off button and volume down to boot into recovery, when i select recovery it tries to open but then the device shuts down and begins bootlooping again. So i cannot get in to recovery. I tried to reset recovery using the hox disaster recovery tread, but when i type the commands in cmd it keeps saying failed.
Is my phone ruined now? can this be fixed? can someone please help me or tell me where i can get help?
I tried using the search function but i didn't find anything, i actually don't really know what to search for... :crying:
I really hope someone has a anwser for me .
Thanks in advance.
Caos
If your recover doesn't work, have you tried reflashing clockworkmod recovery via fastboot?
Also, did you wipe data/factory reset before you changed ROMs?
your phone phone is ok since he is unlocked. the bootloop is caused by wrong boot, have you made a back up for the .
Here what you will do:
1-hold power+ vol down until you get the bootloader menu.
2-go to hboot and hit power to access fastboot.
3-connect your phone via USB (you should get fastboot usb).
4-get the boot.img file from the ROM viper copy it and paste in a folder name it for ex fastboot.
5-Enter to this folder, Hold alt+shift and click right click and chose open command window here.
6-type "fastboot erase cache", should write ok.
7-type "fastboot flash boot boot.img", should write ok
8-reflash your rom again via recovery choose fullwipe in aroma installation.
9-reboot your phone.
open command prompt. type c:\whereveryourfastbootis\fastboot erase cache
as long as you can boot into bootloader(and its unlocked), and you didnt flash stuff for a different phone you're OK
Vcek said:
as long as you can boot into bootloader(and its unlocked), and you didnt flash stuff for a different phone you're OK
Click to expand...
Click to collapse
No i'm sure i did not flash anything for another phone:angel:, and i can still get into bootloader.
I will try everything when i get home, i'm at work now, then i will post if it worked.:victory:
Thanks so much!
tomascus said:
If your recover doesn't work, have you tried reflashing clockworkmod recovery via fastboot?
Also, did you wipe data/factory reset before you changed ROMs?
Click to expand...
Click to collapse
I think i tried, but i will try again, probably did something wrong.
Yes i did a factory reset. I think it went wrong because i had a custom kernel and did a full wipe.
Don't worry, when recovery tries to load and the phone reboots it means you need to fastboot erase cache. i had the same problem when switching to a jelly bean rom and kernel. the factory reset wont help this.
~Jeej~
Noobzter said:
your phone phone is ok since he is unlocked. the bootloop is caused by wrong boot, have you made a back up for the .
Here what you will do:
1-hold power+ vol down until you get the bootloader menu.
2-go to hboot and hit power to access fastboot.
3-connect your phone via USB (you should get fastboot usb).
4-get the boot.img file from the ROM viper copy it and paste in a folder name it for ex fastboot.
5-Enter to this folder, Hold alt+shift and click right click and chose open command window here.
6-type "fastboot erase cache", should write ok.
7-type "fastboot flash boot boot.img", should write ok
8-reflash your rom again via recovery choose fullwipe in aroma installation.
9-reboot your phone.
Click to expand...
Click to collapse
I did exactly as you said, and it worked hura! i'm so happy with my viper sense rom !!! EDIT/ I'm totaly going to make a pink theme for myself EDIT/
Thank you, thank you, thank you, thank you so much !
jam256 said:
Don't worry, when recovery tries to load and the phone reboots it means you need to fastboot erase cache. i had the same problem when switching to a jelly bean rom and kernel. the factory reset wont help this.
Click to expand...
Click to collapse
Thank you for comferting me , obviously i don't know much about flasing roms (and i'm a girl so i have the forces of nature against me) fist time i tried to root and flash a custom rom on my desire hd it took me over one week , because i didn't understand anything and had to google every single word in the guide. I just try to follow the guides step by step and then it goes ok, but if something unexpected happens i'm really lost . I'm so glad i could get help here .
Thank you guys so much for helping me out, i wish there is something i could do in return.
I'm hoping someone can help me. I'm trying to flash "codename android jellybean" to my primoc one v.
I have it unlocked and rooted, thanks to xda. Where I get stuck is trying to flash the above ROM to the phone. I have put the ROM, gapps, and jellyboot5 into my SD card, then flashed those zips from clockworkmod recovery. I have put the boot.img I copied from the jellyboot5 folder into my fastboot folder on my PC.
My problem is that when I try to restart the phone from clockworkmod recovery into bootloader, the phone does the nexus animation, then goes straight back into clockworkmod recovery. I can't get to the white screen that gives me the option of choosing fastboot so that I can, in command prompt on my pc, flash the boot img.
I know I must be doing something wrong somewhere.
Hold and keep the power button for 10 second till the screen turns of and as soon as it turns off hold and keep the volume button.... to use see the fast boot...... other way is press and keep the power button and the volume down button for 10 to15 second
Sent from my One V using xda app-developers app
I was having the same problem I just re started and full wiped and then flashed everything then I used the tool kit to flash the boot.IMG I used to use my cmd prompt but I realized it wasnt even the right boot.IMG flashing as soon as I did the tool kit it worked. Good luck, trust me it did the same thing
Sent from my One V using xda app-developers app
cybervibin said:
Hold and keep the power button for 10 second till the screen turns of and as soon as it turns off hold and keep the volume button.... to use see the fast boot...... other way is press and keep the power button and the volume down button for 10 to15 second
Sent from my One V using xda app-developers app
Click to expand...
Click to collapse
I'm trying that but it just sends me right back to clockworkmod recovery. Can I confirm that I did the flashing steps correctly?
0) Wiped
1) flashed ROM
2) flashed GAPPS
3) flashed jellyboot
4) tried to restart into bootloader (but phone goes right back to clockworkmod recovery)
Did I make a mistake somewhere?
If you have ADB set up on your PC, From recovery plug in your phone bring up ADB. Type adb reboot bootloader
Don't try the button thing people have bricked there phone doing the button thing for too long.
XxlemonxX said:
I was having the same problem I just re started and full wiped and then flashed everything then I used the tool kit to flash the boot.IMG I used to use my cmd prompt but I realized it wasnt even the right boot.IMG flashing as soon as I did the tool kit it worked. Good luck, trust me it did the same thing
Sent from my One V using xda app-developers app
Click to expand...
Click to collapse
I'm sorry, but which toolkit?
ahadzi said:
I'm sorry, but which toolkit?
Click to expand...
Click to collapse
Hey Im confused at what stage your at..
if i understand it you've flashed CM10, but *didn't* flash the CM10 compatible kernel... The Stock Kernel isnt compatible with CM.
If this happens one of two things will occur
1. The phone will hang on boot (aka softbrick)
2. the phone will go directly into CWM
I hit the same problem when I first flashed roms on the one v.
You basically need to reboot into the boot loader (flashboot) and flash the new (CM9) compatible kernel from there.
Alterntively if you get totally stuck use the "stockRRU" and recover your phone using that, (see thread on this)
asantaga said:
Hey Im confused at what stage your at..
if i understand it you've flashed CM10, but *didn't* flash the CM10 compatible kernel... The Stock Kernel isnt compatible with CM.
If this happens one of two things will occur
1. The phone will hang on boot (aka softbrick)
2. the phone will go directly into CWM
I hit the same problem when I first flashed roms on the one v.
You basically need to reboot into the boot loader (flashboot) and flash the new (CM9) compatible kernel from there.
Alterntively if you get totally stuck use the "stockRRU" and recover your phone using that, (see thread on this)
Click to expand...
Click to collapse
That does sound like what my phone is doing. Initially it went straight into CWM, then it got further but would just hang on the colored "X" nexus animation.
At this point I tried to restore my stock nandroid, but even that wouldn't work, with the phone never getting off the "HTC quietly brilliant beats audio" screen.
As for flashing the correct kernel, was jellyboot5 not the kernel for this CM10 rom? And when I try to restore my stock (ICS) nandroid, does it matter that I've tried to flash a JB kernel, or is the stock kernel also restored?
Thanks for any help.
ahadzi said:
That does sound like what my phone is doing. Initially it went straight into CWM, then it got further but would just hang on the colored "X" nexus animation.
At this point I tried to restore my stock nandroid, but even that wouldn't work, with the phone never getting off the "HTC quietly brilliant beats audio" screen.
As for flashing the correct kernel, was jellyboot5 not the kernel for this CM10 rom? And when I try to restore my stock (ICS) nandroid, does it matter that I've tried to flash a JB kernel, or is the stock kernel also restored?
Thanks for any help.
Click to expand...
Click to collapse
Dude if you are CDMA download the toolkit and then put the jelly boot boot.IMG in it and then flash it through there when your in fastboot. Trust me.
Sent from my One V using xda app-developers app
XxlemonxX said:
Dude if you are CDMA download the toolkit and then put the jelly boot boot.IMG in it and then flash it through there when your in fastboot. Trust me.
Sent from my One V using xda app-developers app
Click to expand...
Click to collapse
All right, tried that, phone is still endless stuck in the nexus colored X animation. Will wait another few minutes and then freaking go back to stock using RUU.
Edit: Holy s***, dude, you saved me. I was about to chuck the phone against a wall, until I read that you just did the entire process again, from wiping to flashing the rom, to flashing the boot image using the all-in-one tool. That did the trick. For about ten minutes I was seriously contemplating getting an iPhone. That's how dire this was. Thanks man!!!!!
dude,
ok I'll caveat this by saying I live in the uk so I have a GSM (primoU) not CDMA so I take no responsibility if this goes wrong.,...,
I'm guessing your using the rom in this thread http://forum.xda-developers.com/showthread.php?t=1927794
Reading the thread, here's what I think you should do the following
(Im assuming you've already flashed clockwork mod recovery)
Assumptions
1. You have already unlocked the phone using the HTC unlock procedure
2. You have already installed Clockworkmod recovery
Download the following :
- One All in one toolkit from http://forum.xda-developers.com/showthread.php?t=1676686
- ROM from http://www.mediafire.com/?ldhwd8vki17mbfe
- Kernel from http://goo.im/devs/simonsimons34/primoc/kernels/JellyBoot5.zip
- CM10 compatible GoogleApps (GAPS) http://cyano-rob.tuennerhoff-edv.de/GAPPS/gapps-jb-20120726-signed.zip
steps
1. Copy the ROM onto the microSD, in a folder called say "rom", do not unzip it
2. Switch phone off by pressing the power down button for 10 seconds or so
3. Disconnect USB from the PC
4. Enter fastboot by first pressing and holding "volume - " and then pressing power button once and keep pressing "Volume - "
>>>>>> DO NOT PRESS "VOLUME+" <<< Important
The phone should reboot into fastboot
5. connect USB to PC
6. select fastboot (using vol +/- and press power)
Fastboot should now say "fastboot USB"
8. Unzip/install the All-In-One toolkit somewhere.. We wont be using it here, but installing this gives you fastboot/adb etc
9. Unzip the kernel from the kernel file, you should have a boot.img and put it in the kernels directory
9. cd <DirectoryOfAllInOneToolKit>/Data directory
10. Issue "fastboot flash boot Kernels/boot.img"
This should say something like sending boot.img, and then flashing boot.img..
11. Reboot phone with fastboot reboot-bootloader
This will bring you back to the fastboot screen, select recovery and that should bring you to Clockwork mod
12. select "install zip from zipfile", then choose-zip from SD Card, select your rom (zipfile) and say flash.
(hint : vol +/- go up down, and power selects)
13. When this is done, then install GAPS in the same way..
14. Finally you need to make sure all the caches and data is wiped. to do this enter the wipe menu and issue "factory reset/wipe data" and wipe dalvik cache
15. Finally select reboot and smile
That should be it! I O
Oh before i forget, the AllInOne package is cool, but as your in a semi brick situation and that all in one requires adb support Im not sure what it will do hence detailing the steps manually above.. For newbies this tutorial is still valid, but you need to unlock your phone first and install CWM . If you are coming from stock I would recommend using the all in one tool (above) GUI as it saves typing!
Hope this helps
asantaga said:
dude,
ok I'll caveat this by saying I live in the uk so I have a GSM (primoU) not CDMA so I take no responsibility if this goes wrong.,...,
I'm guessing your using the rom in this thread http://forum.xda-developers.com/showthread.php?t=1927794
Reading the thread, here's what I think you should do the following
(Im assuming you've already flashed clockwork mod recovery)
Download the following :
- One All in one toolkit from http://forum.xda-developers.com/showthread.php?t=1676686
- ROM from http://www.mediafire.com/?ldhwd8vki17mbfe
- Kernel from http://goo.im/devs/simonsimons34/primoc/kernels/JellyBoot5.zip
- CM10 compatible GoogleApps (GAPS) http://cyano-rob.tuennerhoff-edv.de/GAPPS/gapps-jb-20120726-signed.zip
steps
1. Copy the ROM onto the microSD, in a folder called say "rom", do not unzip it
2. Switch phone off by pressing the power down button for 10 seconds or so
3. Disconnect USB from the PC
4. Enter fastboot by first pressing and holding "volume - " and then pressing power button once and keep pressing "Volume - "
>>>>>> DO NOT PRESS "VOLUME+" <<< Important
The phone should reboot into fastboot
5. connect USB to PC
6. select fastboot (using vol +/- and press power)
Fastboot should now say "fastboot USB"
8. Unzip/install the All-In-One toolkit somewhere.. We wont be using it here, but installing this gives you fastboot/adb etc
9. Unzip the kernel from the kernel file, you should have a boot.img and put it in the kernels directory
9. cd <DirectoryOfAllInOneToolKit>/Data directory
10. Issue "fastboot flash boot Kernels/boot.img"
This should say something like sending boot.img, and then flashing boot.img..
11. Reboot phone with fastboot reboot-bootloader
This will bring you back to the fastboot screen, select recovery and that should bring you to Clockwork mod
12. select "install zip from zipfile", then choose-zip from SD Card, select your rom (zipfile) and say flash.
(hint : vol +/- go up down, and power selects)
13. When this is done, then install GAPS in the same way..
14. Finally select reboot
That should be it! I O
Oh before i forget, the AllInOne package is cool, but as your in a semi brick situation and that all in one requires adb support Im not sure what it will do hence detailing the steps manually above..
Hope this helps
Click to expand...
Click to collapse
I really apreciatte this tutorial!!!
I am at stock, from Mexico...
A question...
Is this tutorial functional to the other ROMS??..
I mean, to nonCyano ROMS?
Firstly when u wipe its imp u wipe all the cache also.....Then try doing cm10 it has aa direct option to go to the bootloader
Sent from my One V using xda app-developers app
Please ask all question in the Q&A section. Thread moved there.
sonrics1993 said:
I really apreciatte this tutorial!!!
I am at stock, from Mexico...
A question...
Is this tutorial functional to the other ROMS??..
I mean, to nonCyano ROMS?
Click to expand...
Click to collapse
I guess so, however you would need to check each different rom to be sure..
Also cybervibin is right, before rebooting the phone it is recommended to
- go into clockworkmod recovery, wipe menu and wipe data/factory reset
- also wipe dalvik cache
asantaga said:
I guess so, however you would need to check each different rom to be sure..
Also cybervibin is right, before rebooting the phone it is recommended to
- go into clockworkmod recovery, wipe menu and wipe data/factory reset
- also wipe dalvik cache
Click to expand...
Click to collapse
Roger that,
Dalvik cache, is the place where all ur apps cache are stored., of u don't wipe it, in short it will show data if previous rom causing many problems
Sent from my One V using xda app-developers app
Hello, I made a very foolish decision today. I just recently rooted my phone (i747), and i am still not familiar with roms or flashing or any of that. I installed the Rom Manage app by clockworkmod onto my phone. I did no other preperation other than creating a backup through that app on my phone. Then using that app, i downloaded the CyanogenMod 10.1, directly onto my phone. It then gave me the option to wipe data which i chose not to do. It then started the installation of the rom. Everything started off okay and it looked like it installed. When it rebooted it got stuck on the CyanogenMod circle boot and no matter what i try i cannot fix it.
I cannot stress this enough. I am very new to this stuff and am not exactly sure how everything works. It is my mistake and i understand it was the outcome of my stupidity. However, all I am trying to do is fix my phone. When i try to boot into recovery mode (power, home, and up vol) it just restarts still in the boot logo. Whenever i press power, home, and volume down it says "booting a custom rom can harm your device are you sure?" but whether i choose yes or no it is still stuck.
Sorry about all the text, but can somebody please explain to me in the most noob friendly way possible how i can just get my phone in working condition? Thanks for your time
Try booting into recovery this way, in this button pressing order: Vol up + home + power. When your phone vibrates and you see the blue text in the top left corner of the screen, release just the power button.
If this gets you into recovery, you can wipe data, cache and dalvik (under advanced) to see if this clears your issue.
For future reference, don't flash ROMs in rom manager. Only use that app to update or install recovery.
Thanks, that got me into recovery mode. I wiped the dalvic cache, and did a factory reset, but I am still stuck in the boot
crayonslayer said:
Thanks, that got me into recovery mode. I wiped the dalvic cache, and did a factory reset, but I am still stuck in the boot
Click to expand...
Click to collapse
I would suggest to download the CM10 ROM from their thread, and copy it to an external sd card. You can reflash it from the sd card in the recovery menu.
ya, now that you know how to successfully get into recovery, i would flash a rom and gapps again via that route. check out the link in my signature. its got some stuff to look over for a safe and smooth backup & installation
Thanks!
xBeerdroiDx said:
Try booting into recovery this way, in this button pressing order: Vol up + home + power. When your phone vibrates and you see the blue text in the top left corner of the screen, release just the power button.
If this gets you into recovery, you can wipe data, cache and dalvik (under advanced) to see if this clears your issue.
For future reference, don't flash ROMs in rom manager. Only use that app to update or install recovery.
Click to expand...
Click to collapse
Thanks! I couldn't get it to boot into Recovery until I saw your post.....
Thanks. I was stuck in CM11 loop.
Is this also applicable to HTC Desire 816. sorry for crushing, I am just getting frustrated on this matter. tried using my computer to boot from fastboot and tried also pressing the power button while pressing the -Volume. But still on the same cycling LOGO. Please help me if anyone knows how to fix this. Iv also tried to open the back of my unit. but the battery is embedded to the phone.
....
wrong post
how to fix
crayonslayer said:
Thanks, that got me into recovery mode. I wiped the dalvic cache, and did a factory reset, but I am still stuck in the boot
Click to expand...
Click to collapse
maybe you tried to make an advanced data wipe and selected internal storage, dalvic, cache, etc.
what you need to do is put the phone in recovery mode again, select install and then scroll down to find the OS zip that was broke when wiping, after flashing be sucessful reboot system. then turn off the phone again o get it in recovy once more, select install, scroll down but this time you must to install Gapps. to conclude you need to flash OS and Gapps again through recovery mode.
hope this help
also its really complicated ..
i have rooted my mobileall done
later i install new rom ( venom viper one )
i have someproblem with clocks i erased the rom and try to install again so now is the problem
i have wipe the rom then suddunly i go in advance wipe and i erased all the data in internal memory
not im stuck and i dont know what to do nothing is going on in my mobile
its just htc icon is coming start screen and nothing else i so fu.. up please please someone help what i do
i cant sleep i buyed it one month before please help
Do you have an sdcard? You could always sideload a Rom too if you have a computer available. Here's a link its for Sprint HTC one m8 but it'll work the same for other variants its not device specific.
http://forum.xda-developers.com/showthread.php?t=2317989
The same problem as here : http://forum.xda-developers.com/htc-one-m8/help/soft-bricked-htc-one-m8-os-t2858680
Read post #4 & #11 on How-to (if you don't have external sdcard)
problem
grim489 said:
Do you have an sdcard? You could always sideload a Rom too if you have a computer available. Here's a link its for Sprint HTC one m8 but it'll work the same for other variants its not device specific.
http://forum.xda-developers.com/showthread.php?t=2317989
Click to expand...
Click to collapse
the screen is stuck on htc logo nothing is happing now its just glowing...i cant connect it with pc i have sd card inside but what should i do with sd card ?? how do i go inside the bootloader or recovry ??? please help
To get in boot loader hold power and volume up until the screen goes off. Release them and quickly press and hold power and volume down until boot loader shows up. Then select recovery and press power. It should go into your custom recovery. You should download a Rom and put it on your sdcard then flash it through recovery.
grim489 said:
To get in boot loader hold power and volume up until the screen goes off. Release them and quickly press and hold power and volume down until boot loader shows up. Then select recovery and press power. It should go into your custom recovery. You should download a Rom and put it on your sdcard then flash it through recovery.
Click to expand...
Click to collapse
thanks man its installing thanks alot if i have some problem i write here again thanks thanks thanks still instlling rom
In the future, there is normally no need to go into Advanced Wipemenu in TWRP. You will see on the main Wipe screen, it says the default wipe is data, cache and Dalvik is all that is usually needed. It says that for a reason!
If you do choose Advanced, double check before wiping, and only wipe if you know what the result is going to be! For instance, lots of folks wipe /system, than ask "why don't I have an OS now?"
No problem I'm glad I could help?
redpoint73 said:
In the future, there is normally no need to go into Advanced Wipemenu in TWRP. You will see on the main Wipe screen, it says the default wipe is data, cache and Dalvik is all that is usually needed. It says that for a reason!
If you do choose Advanced, double check before wiping, and only wipe if you know what the result is going to be! For instance, lots of folks wipe /system, than ask "why don't I have an OS now?"
Click to expand...
Click to collapse
so porblem again i install the ron and now the problem is ( setup not installed ) now mobile is on but black screen after lock screen
what should i do now ?? please help
ninjablade said:
so porblem again i install the ron and now the problem is ( setup not installed ) now mobile is on but black screen after lock screen
what should i do now ?? please help
Click to expand...
Click to collapse
Setup not installed ? Please be clear. So, you got your lock screen, right ? And when you unlock it, nothing shows up ? At this, point, which rom did you flash ? Stock ? Custom ? Carrier Stock ? If its completely stock, try re-installing the rom again,by wiping the system partition in the twrp recovery. If the problem persists, try flashing a stock launcher like the S4 or S5, that are to be flashed from the recovery.
ninjablade said:
so porblem again i install the ron and now the problem is ( setup not installed ) now mobile is on but black screen after lock screen
what should i do now ?? please help
Click to expand...
Click to collapse
You flashed a 4.4.3 ROM base on a 4.4.2 firmware maybe ??
Restore your own stock ROM.