So as I understand it, if I have this radio the only roms I can run are rhythmic and ics roms.
I really a want to flash Pac but end up with boot loops no matter what kernel I flash.
is there currently anyway to get this rom running on this phone. If not is there any development still in the works that might allow us to use JB roms in the future?
Sorry if this had been answered but I read though like ten pages of the forums and did didn't see this answered completely.
Related
Hey guys I have been doing quite a bit of searching through the forums and still have a couple questions about custom roms and rooting. Forgive the noobness but the droid incredible is my first android device and I only recently got it.
1. My first question is what is the simplest way (rom + root I assume) to get a stock version of android on my incredible? Also what rom would you recommend (I have seen a pretty big list but know nothing about them)?
2. What is the difference, if any, between a kernel and a rom? Ive seen both words used a lot and have seen kernels that are stock and roms that are as well. Which would I use between the two?
I know these questions may be dumb but I have been searching for a couple days and have gone through hundreds of threads trying to find the definitive answer (there were some benefits though, I use launcher pro and the droid x's keyboard now) any help would be appreciated.
1. You are right in assuming that the quickest (and only) way to get a stock version of Android on your phone is to root your phone and install a custom recovery that will allow you to flash a rom. It is not really possible for me to recommend a rom because rom's are all about personal preference and my preference may be different from yours. That being said, if you are interested in stock Android, check out Cyanogenmod. The biggest thing right now is that for the Incredible, Cyanogenmod is the only true stock Android that is compiled from AOSP (Android Open Source Project) however it is still in its early stages for our device, so it's still buggy. The other roms are modified versions of our stock sense rom, so some of the roms are modified to have the bulkier parts of of the Sense UI removed, but it is still a Sense rom.
2. I'm not going to profess to be extremely in the know about kernels, but a kernel is the go-between for the hardware and the os/applications. If you want to learn more about kernels, you can read the wikipedia page about kernels found here. Basically what you need to know is that the rom is the operating system, so if you wanted to change the OS such as from Sense to Vanilla Android, you would flash a rom. If you wanted to change the way the system runs, such as if you want your processor to be overclocked or undervolted, you would flash a kernel.
Hope this helps.
That answered everything! Thanks for the reply and I will keep checking the forums for stock roms that seem stable!
Just finished unlocking, rooting and getting my GeNex all dialed.
After all that work (I had some trouble but managed to figure it out after several frustrating hours) I am definitely ready to reward myself with a new ROM.
From what I can tell there doesn't appear to be that many.
Any recommendations on a good one to start with?
My first instinct is to go with Android Revolution HD based on the amount of pages on that thread.
I would recommend either as you say ARHD or Modaco's custom ROM's there both good ROM's and well supported. I'd also suggest if you want OC/UV then use a custom Kernel with either ROM..
Personally Im using Modaco's ROM with Francos Kernel. Both can be found in the Dev section..
Happy flashing.
P.s make a Nandroid of your stock ROM incase you ever want to return to stock.
Thanks, mklass!
First thing I did when I got CWM on there was nandroid. Thanks for the info. I haven't seen the Modaco yet so I'll check that out for sure.
Any news or rumors on MIUI 4??
So, Ive been around the S3 forums for awhile, but not so much the root side. Im wondering which is the best all around recovery? Back on the evo, clockwork recovery was HORRIBLE and flashed all ROMs bad and always messed them up but AmonRa did everything flawlessly.
Is there any S3 recovery's that are messed up and flash roms incorrectly? or does everyone just seem to use a main one? If so, which.
Also another question. Do developers on the s3 actually update OP with bugs people find? On the original evo, it was horrible because there would be so many bugs on some roms and OPs where only updated with change log and not known bugs.
Also, can someone tell me the most used ROMs on the s3? nightlies i tend to avoid because they lack to much details and im practically blindly flashing those.
Any 4.2 stock or 4.1 stock or anything? Any kernel suggestions, anything i should be warned about?
Thanks in advance.
Also, sorry for being a forum pest =p
All of these are subjective questions...try out both CWM and TWRP, find which you like better and look into the Development section to see what roms are available, the only way to know for sure whether a rom would be good for you and whether you like it is to flash for yourself rather than taking peoples words for it
Also, theres been at least 5 other threads like this where people have asked "what rom/kernel?", I would suggest looking for those and reading.
CNexus said:
All of these are subjective questions...try out both CWM and TWRP, find which you like better and look into the Development section to see what roms are available, the only way to know for sure whether a rom would be good for you and whether you like it is to flash for yourself rather than taking peoples words for it
Also, theres been at least 5 other threads like this where people have asked "what rom/kernel?", I would suggest looking for those and reading.
Click to expand...
Click to collapse
You could do that or just use TWRP .
Sent from my SPH-L710 using Tapatalk 2
I came to the GS3 from a long history as an Evo owner. While i was on HTC hardware I loved TWRP as it was always the most stable and best supported. On my GS3 though i find that there is better support for the CWM recovery. It seems to work better in my opinion. I have tried both but keep using CWM. I am a CM10.1 user as well and I think that it likes CWM better than TWRP.
So I'm on CM 11 and I would like to go back to insertcoin, however I can't very work to work once booted. I also don't get a boot animation at all... What do I need to do?
Just look around in Development and other Q&A threads (or right in the InsertCoin thread) for discussion on how to update the firmware. This has been discussed in probably dozens of other threads already.
This isn't related to being on AOSP. Its simple a matter of outdated firmware not compatible with InsertCoin (and other current Sense ROMs).
Hello all. First I want to thank everyone for still being around to help, especially on such an old device.
Anyway, I recently bought one of these and got it rooted via odin. Currently that's all I've done to her. I have been looking over this forum, android forums, and Google in general prior to posting, I want to solve problems on my own, but when I can't, I'm not scared to ask for help. And I need help with a few issues. I will seperate them, to make answering them easier.
1) is twrp not available for this model?
2) if not, the only other recoverys I can find is Phils TouchWiz, and ClockworkMod recovery touch 5.8.1.5. I wouldn't think these are the same, which is suggested? Also Phils Touchwiz was last updated (that I can find) to 4.1.2 which is where I currently am, am I want to go to 4.4
3) I only see 2 ROMs listed on here, and 1 is one of the ones I was thinking of using in Dirty Unicorns. The other I was thinking about was CyanogenMod. Which of these two is suggested?
4) I have no service on this phone, as its my tinkering device. The only thing I need to work is WiFi. That being said, do I need to flash a new modem?
Do I need to flash a new kernel?
Thanks for any help you can throw me. I know there are lots of tuts for all these questions, but frankly they are all very old, and this stuff changes by the day...
1. Yes but this device has recovery and kernel built in together, this recovery is only for flashing / wiping, other than that, it is not usable with other custom roms unless the devs build it to use that
recovery along with the kernel.
2. It's the same as question 1, For Touchwiz Jellybean, you'll need a recovery kernel that supports the android version and firmware, otherwise it wouldn't work or boot up, Agat's Source GB27 for GB27 Touchwiz ROMs. Or specific AOSP Kernels for certain kernel build updates ( versions are compatible with the build date of the ROM's Original Kernel, meaning it only works on certain ROMs that are updated with the same kernel build, for example, A custom 0.0.25 will not work with stock 0.0.26 because there was a major update change in the kernel that'll make 0.0.25 not usable on it. If you use a kernel based on a specific date on an AOSP ROM that frequently updates the kernel, it may not boot up. )
3. The AOSP ROMs that are being updated at the moment are the Teams that do Nightlies. So Cyanogenmod is the only AOSP ROM that's being updated weekly for this device, I have not checked on the other ones.
4. No need to flash a modem if you don't have data service, however it may help either way when using WiFi due to dropped connections, stability etc. For AOSP, use any ICS modem, for Touchwiz, use the same android firmware modem.
Flashing a new kernel is not needed unless you don't like how the stock kernel performs whether if it's power saving or performance. AOSP kernels are kind of limited as the ones out now work with different build dates of the ROMs, Touchwiz has a couple, but Agat63's Source Kernel is recommended by everyone for GB27.