[Q] Blank screen, constant reboots, etc - Xperia Play Q&A, Help & Troubleshooting

Alright so I'm guessing i might have a broken flex cable, i don't know because of what is happening.
Don't even know where a good place to buy one.
But; first off, I don't use the phone anymore, it just its on my desk, sometimes I touch it, sometimes I don't.
When I was first getting the blank screen issue, the phone just had been sitting on my desk with the screen on (stay awake), several days later, the screen would be off and refused to come on.
Back then I was using a JB rom. Which I was told JB kernels had problems.
I can boot into fastboot and flash a new kernel and it doesn't change anything.
But now if I load up Flashtool, and boot the phone into flashmode, it will reset itself while flashtool is trying to read from it, then boot itself back into flashmode, then a few seconds later reboot itself again.
Last time I got the phone's display to come on, it was because I was able to use flashmode to flash to it before it rebooted itself.
If I try to boot the device, it will display a white LED for several seconds, then flash a few colors before going back to white and the phone resetting again.
Are these all symptoms of a broken flex cable? It makes no sense to me why fastboot mode is fine, but everything else constantly reboots.
I've tried different kernels and roms to make sure there wasn't a problem in that area.

Ellises said:
Alright so I'm guessing i might have a broken flex cable, i don't know because of what is happening.
Don't even know where a good place to buy one.
But; first off, I don't use the phone anymore, it just its on my desk, sometimes I touch it, sometimes I don't.
When I was first getting the blank screen issue, the phone just had been sitting on my desk with the screen on (stay awake), several days later, the screen would be off and refused to come on.
Back then I was using a JB rom. Which I was told JB kernels had problems.
I can boot into fastboot and flash a new kernel and it doesn't change anything.
But now if I load up Flashtool, and boot the phone into flashmode, it will reset itself while flashtool is trying to read from it, then boot itself back into flashmode, then a few seconds later reboot itself again.
Last time I got the phone's display to come on, it was because I was able to use flashmode to flash to it before it rebooted itself.
If I try to boot the device, it will display a white LED for several seconds, then flash a few colors before going back to white and the phone resetting again.
Are these all symptoms of a broken flex cable? It makes no sense to me why fastboot mode is fine, but everything else constantly reboots.
I've tried different kernels and roms to make sure there wasn't a problem in that area.
Click to expand...
Click to collapse
had that problem too. you have to enter CWM and flash any room that you can

Related

[Q] Screen Issues Lead To Bricked Device

I was trying out using a keyboard with a cheap USB OTG cable, and all was good. Then all of the sudden the screen went buggy, where ever other line of pixels was shifted to the left or the right, almost like some sort of corrupted video file. It started to reboot itself, and it got to the black screen with the Google logo and then the screen fuzzed in the same way as before. It then starts to reboot and does the same thing over and over again. I find that I can get to the recovery screen with the scroll arrows. From there, if I tell it to reboot into recovery it goes back into the same Google logo bootloop. I then went back to the original recovery screen and I decide to try out adb to see if it works. Sure enough it does, and I unwisely start flashing a stock 4.2 bootloader image. However, while it is flashing the screen does the same fuzz thing and and stays fuzzed. Then it doesn't respond to anything. I take out the battery, and try to restart and with will not turn on at all, no vibration, no light from the screen, nothing. I tried a unbricking methods from there, and nothing can make it come back alive. Any ideas?
Additional info:
GSM tajkju
Bootloader unlocked
Running stock unrooted 4.2 that I flashed manually
Stock recovery

[S/SL/AS/Ion]General bricked device thread

So, I've been seeing A LOT of threads regarding bricked devices (be it soft or hard bricks). So, I decided to create this thread, so everyone with bricked devices post here for help, instead of filling our forums and XDA servers with a load of topics with the same stuff.
If someone knows of a general unbricking thread, please PM me or tag me with a link so I can post on this post.
I will PM a mod to pin this thread to top.
To all brickers,
Before posting, try this thread:{RECOVER SOFT-brick}[2012 XPERIA's]Recover ALL 2012 XPERIAs from SOFT-brick
Remember to give the author thanks
Xperia S Return Back To Stock!
Pre-Requisites
For All The New Users..
If You Did Something Wrong
If nothing is working out
Not Able to Fix
Need to Return Back To Original Firmware?
Here is the Guide For You
Click to expand...
Click to collapse
Return Back To Stock
GUIDE for Better Understanding With Pictures And Images For New Users
Explained Step By Step
Click -- [HERE]​
Just a tip: Try downloading Sony Update Service and following the instructions if you get a green LED blink on your phone, which is way simpler to recover without any problems.
Guys My ION LT28h got bricked during a recovery using CWM.
First It was a soft brick, i did something , random pressing of buttons made it worse. its on HARD BRICKED STATE now. Its been more than 5 weeks.
So after some research i found out that my Kernel is ****ed up. My phone is Boot loader Locked, so i cant flash the Kernel separately.
Now few of our fellow xda members told me to unplug the battery cable from the motherboard.
I have successfully disconnected the battery cable from motherboard, i kept it disconnected for one whole night.
Whats the next step ?
Will i be able to flash it with flash tool after connecting the battery to motherboard back ?
Will i be able flash the busted Kernel to a working stock kernel ?
Accidentally messed up and soft bricked Ion- LT28h.
xperia Ion LT28h
ROM: JB 4.1 Pure CyanogenMod Based on CM 10 FXP 218
kernel: GI Kernel v3 or v5
Recovery: TWRP and CWM
Rooted and Unlocked Bootloader
Hi guys, above mentioned were my previous settings. Had occassional reboots and sometimes it was kinda laggy that's why i decided to flash it to another ROM - supposedly to ParanoidAndroid. After following steps to install PA, my phone was on bootloops, was in a hurry then freaked out, i tried soft and hardreset, and tried booting on recovery both on twrp and cwm to flash properly as what was instructed however i may have flashed the wrong zips interchangeably with other roms and kernels resulting to a total messed up ion. i could have restored immediately to a saved CWM or TWRP backup right away however, i only stopped resetting when my phone suddenly stopped responding, no Sony logo, no Xperia logo, no boot, just backlight on, does not turn off, soft and hard reset no nothing. i guess until the battery went dead, then i charged it the whole night.
after reading most threads on recovering softbricked phone, mainly this {RECOVER SOFT-brick}[2012 XPERIA's]Recover ALL 2012 XPERIAs from SOFT-brick thread, and after a couple of days of red led, i constantly charged, i patiently waited(2days) still no green led, however i found out that i can access fastboot. (blue led).. i managed to get to this fastboot mode(blue led) ONLY after i soft reset or power+vol.up/1 vibrate the phone once the backlight lits up- on&off - for about less than a minute then it goes back to red led. (i'll be calling that stage as backlit-on&off-then-back-to-solid-red-led cycle) but then again if i go to fastboot, it will stay in fastboot mode during flashes and it stays there until the battery runs out and goes back to red led. then i charge my phone again, but
during fastboot mode, i have tried flashing the kernel, system and boot image. all via Fastboot command prompt.
and all were successful. there were combinations like, flashing only the kernel, tried flashing kernel and system, tried boot image only, tried all the same time, tried system only, tried different kernels, system and boot img, BUT STILL my phone wont even give me the sony logo screen.
then i thought i may need to wipe cache and userdata so i also erased cache and userdate a couple of times via fastboot mode command prompt. and yes fastboot does detects my phone. it can reboot to bootloader or just the normal fastboot reboot. so i have no issues regarding phone and pc via using fastboot command prompt. and Same thing - all flashes were successful,
i have flashed i think more or less than a total of 50 times, flashing different combinations. Still it goes back to brick mode.. backlit-on&off-then-back-to-solid-red-led cycle.
i'd like to add that i have also tried flashing via fastboot mode using Flashtool. (thunder icon+selecting 'fastboot mode'). i have flashed the kernel and system, tried kernel only, tried both same time, tried system with boot.img tried flashing kernel with boot.img too, tried different combinations. again, all were successful, but still same result.
it only goes back to backlit-on&off-then-back-to-solid-red-led cycle.
a couple of days after it went to green. flashmode finally! thinking everything will now be alright, i decided to flash it using flashtool via flashmode. I connected phone to pc, after the solid red led and after backlit-on&off-then-back-to-solid-red-led cycle. and the it goes back to red led then the backlit on&off cycle, after observing my phone for hours i then knew that after, i guess about a hundred cycle of backlit on&offs it really does go to green led by itself and if i'm connected to the pc and flashtool it stays on green led or flashmode, however if im connected only on a wallcharger it goes to green led but will only stay there for like 1-2 seconds then goes back to red led and then the backlit on&off cycle.
then i thought just maybe my battery really needs to die as mentioned, since upon plugging my phone on to a wall charger it goes immediately to red led and there's really no response on the phone except only if you gonna wait for the backlit on&off cycle the n press power + vol up then it will respond and go to fastboot mode or power+vol down which goes to flashmode. then i decided to reset the battery by carefully unplugging the ribbon cable and i did. well, initially it did (led was off for a moment then changed to blinking red then solid red) but i have to go to work that time and had to continue only after coming home from work, and that did not resolved it.
i may have flashed my ion a hundred times or so to this date, still no luck. i have finally decided to re-locked my bootloader- and yes it is successfully locked now. - thinking PCC/SEUS/SUS would get it back to life but i'm wrong - it just cant detect my phone. PC companion detects it as Phone/Tablet only then after selecting Ion on the phone list it always says my device is upto date and no available software. (sad)
I also noticed that flashtool does not detect my phone as LT28h. It only says that it is connected to flashmode. Is that an issue too. I have tried diff versions of flashtool from 9.6 to 9.11 all same. i have also installed fastboot and adb as well as flashtool drivers, it sayas all were successfully installed however if im connected via flashtool flashmode, none seems to be detected on device manager, tried reinstalling and manually installing the sony sa0103 adb interface driver however after installing i get an error unable to start device. even if my phone is connected still the device on devicemanager still has an excalamation point. i'm using windows 8. i have flashed successfully before when my phone was in good state, however now that im on brick mode it seems that all flashes i've done did not push thru. also those times that i have flashed my ion via flashtool it says something like:
phone should be connected with usb debugging on and enabled install on unknown sources. i have tried flashing it using win7 pc phone was not detected still, however flashtool stated and detected my device was connected on usb debugging mode, but have has errors during flashing though.
since my bootloader is now locked im unable to flash now via fastboot. before bootloader status says- rooted now bootloader status is- ROOTABLE.
i previously owned xperia neo and have managed to flash it successfully without any issues, also this is the 3rd time i had bricked my ion and managed to fix it before..
i also want to ask regarding flashing back to stock - does that mean any stock firmware can be selected? can be .233 / .68 /.20 or the latest ICS 6.1.E.3.7? coz i have basically tried to all of those mentioned. also is the reason that my flashes were not successful is it because i was currently on 4.1 JB ROM and im flashing 4.0 ICS stock? I also have TWRP and CWM backups on my PC and on internal SD card, is there a way for me to flash or restore those backups via flashtool?
I'm running out of options, i'm desperate and on the verge of giving up.
i dont want to believe that i have totally messed up and hard bricked my phone. I do believe that there is a solution to this, and my phone can be recovered without sending it over to repairshop.. Today is the 3rd week and still struggling to get my phone back to life (even just the sony logo) . any suggestions before i unlock again my bootloader? please help. Any help will be gladly appreciated, and many thanks to everyone for spending time on reading my messed up and soft/hardbrick ion experience.
If you brick your device while flashing kernel and device do not respond any way then follow this little difficult but 100% sure method.
- Dissemble your phone.
- Disconnect battery ribbon from motherboard.
- Reconnect battery ribbon.
- Fastly connect USB cable while holding vol +/-
- Flash Kernel or FTF FW.
Just looking for some direction on my Xperia Ion that recently got bricked while attempting to update to JB software.
Currently, it has no response except for plugging into charger giving a solid red light. I am unable to get it into flashmode and have already disassembled and disconnected/reconnected the battery to reset it.
Im gonna guess that the kernel is royally efed up at this point, Im unable to get it into a bootloop either.
What is the next step to solve this issue? Any help is greatly appreciated!
Droiiiiiiiiid said:
Just looking for some direction on my Xperia Ion that recently got bricked while attempting to update to JB software.
Currently, it has no response except for plugging into charger giving a solid red light. I am unable to get it into flashmode and have already disassembled and disconnected/reconnected the battery to reset it.
Im gonna guess that the kernel is royally efed up at this point, Im unable to get it into a bootloop either.
What is the next step to solve this issue? Any help is greatly appreciated!
Click to expand...
Click to collapse
Did you try SUS ? Official update service ?
Droiiiiiiiiid said:
Just looking for some direction on my Xperia Ion that recently got bricked while attempting to update to JB software.
Currently, it has no response except for plugging into charger giving a solid red light. I am unable to get it into flashmode and have already disassembled and disconnected/reconnected the battery to reset it.
Im gonna guess that the kernel is royally efed up at this point, Im unable to get it into a bootloop either.
What is the next step to solve this issue? Any help is greatly appreciated!
Click to expand...
Click to collapse
I think that you should charge it more to be able to go into flashmode. Maybe until the red light will go off or it'll turn into green. Then try to go into flashmode. Good luck
MozzieZ said:
Did you try SUS ? Official update service ?
Click to expand...
Click to collapse
I was going to but that requires my device be in Flashmode.
Droiiiiiiiiid said:
I was going to but that requires my device be in Flashmode.
Click to expand...
Click to collapse
Read this, maybe it will help you.
http://forum.xda-developers.com/showthread.php?t=2344896
This is my first time got hard brick on my phone. I'm flash wrong ROM (it made for S but I flash it on SL) now my phone totally dead. When I put on wall charger it show constant red led and off several minutes later, try disassemble phone and disconnect and connect ribbon doesn't help to get flashmode and fastboot mode. Any help would be very appreciated.
EDIT: After disconnect ribbon battery I got notification on flashtool "device connected with usb debugging off" but led remains on constant red. Should I try rubber band tricks?
ahlulnugraha said:
This is my first time got hard brick on my phone. I'm flash wrong ROM (it made for S but I flash it on SL) now my phone totally dead. When I put on wall charger it show constant red led and off several minutes later, try disassemble phone and disconnect and connect ribbon doesn't help to get flashmode and fastboot mode. Any help would be very appreciated.
EDIT: After disconnect ribbon battery I got notification on flashtool "device connected with usb debugging off" but led remains on constant red. Should I try rubber band tricks?
Click to expand...
Click to collapse
After disconnecting and connecting back the battery cable , you wont get access to flashboot/flashmode instantly. disconnecting the cable will reset the phone.
If you are getting red led means , its charging on low power. You should keep on wall charging for some hours , say 12 + hours.
After that try flashing the kernel alone , first . you will have to hold the flash mode button for sometime. say 5-10 minutes. then if u have enough charge in your phone it will flash the kernel alone. if u are successful in flashing the kernel, then charge again for some hours , 2-4 hours then try to flash the entire ROM.
Read the Thread Recovering Bricked Phones. This will help. I recovered my phone following the method shown in that thread.
Be patient bro, you can recover your phone, just that it will take some time
Captain Droid said:
After disconnecting and connecting back the battery cable , you wont get access to flashboot/flashmode instantly. disconnecting the cable will reset the phone.
If you are getting red led means , its charging on low power. You should keep on wall charging for some hours , say 12 + hours.
After that try flashing the kernel alone , first . you will have to hold the flash mode button for sometime. say 5-10 minutes. then if u have enough charge in your phone it will flash the kernel alone. if u are successful in flashing the kernel, then charge again for some hours , 2-4 hours then try to flash the entire ROM.
Read the Thread Recovering Bricked Phones. This will help. I recovered my phone following the method shown in that thread.
Be patient bro, you can recover your phone, just that it will take some time
Click to expand...
Click to collapse
Thanks for your fast reply, but I'm already put on wall charger 1 day, and the red led got turn off (no led at all). I think I'll try rubber band trick tonight and leave it till morning.
Hey guys I'm having a problem with my Acro S... It's bootloader is unlocked.
It was soft bricked due to a command I ran on Terminal Emulator (dd if=/dev/zero of=/dev/block/mmcblk0). After inputting that command I safely turned off the phone (Long press Power button, Choose Power off). After turning off, phone was completely dead, no response. It was on 80% battery for sure. It happened last week Saturday (July 20). I then charged my phone for 2days+. On the first day (July 21), no red LED appeared, on the 2nd day (July 22), constant red LED appeared, 3rd day (July 23), red LED disappeared. I then prepared my flashtool for flashing the JB firmware .211 KERNEL ONLY. So I plugged in my phone with volume down pressed, I pressed it for 15mins! My finger was f*cked, after 15mins... nothing happened, RED LED just disappeared and I just heard the Windows USB sound. Flash process didn't start, phone didn't give me a GREEN LED. I tried it again and again and miserably same thing happens, can't go to flash mode. Tried the same with volume up button for fastboot mode but still nothing happens, the RED LED just disappears!
Should I just leave my phone charging on the wall socket even if the RED LED disappeared? To get green LED?
SOMEBODY PLEASE HELP ME! I NEED MY PHONE SO BAD! :crying:
i was installing the prerooted/deodexed stock lt28h rom through cwm in the middle of instalation my phone rebooted and came into a sony bootloop i forced it shutdown by pressing power and volume up now its not starting not even charginig what to do please help :crying::crying:
Flash Tool
Be calm and sit back now put your phone to charger for whole night and then next day download flashtool and a firmware for you device and fladh it your device will breath again.......
tejasvi1 said:
i was installing the prerooted/deodexed stock lt28h rom through cwm in the middle of instalation my phone rebooted and came into a sony bootloop i forced it shutdown by pressing power and volume up now its not starting not even charginig what to do please help :crying::crying:
Click to expand...
Click to collapse
we have desame problem my phone is not charging no ligths/led and cant power on after pressing power and up because im stuck in boothllop after afgrading via OTA.
theprint said:
we have desame problem my phone is not charging no ligths/led and cant power on after pressing power and up because im stuck in boothllop after afgrading via OTA.
Click to expand...
Click to collapse
thks for sharing but i have alraedy solved my hard brick problem my phone is back and running normally

Help! It wants to live, but won't go past splash

Phone's been slowly giving me more and more issues. Today I was using it fine, turned off the screen, a bit later, tried turning it on and nothing. This has been a common occurrence, about once a day I have to do a battery pull or plug it in to make the screen turn on, then all is normal. Battery pull got it to boot to the splash screen, but then nothing. Plugged it in, and nothing. Left it plugged it in for about an hour, tried again, still nothing. Unplugged and tried powering on, nothing. Pulled the battery again, and could only get to the splash screen. I'm running JB Sourcery, and have the one selected where the apple rots and then it spells out droid. I get through that and then it does nothing else.
Info: just tried again, had to pull the battery, then I could get the google logo to pop up, but that was it.
Info the 2nd: plugged it in for 2 hours, the graphic showed it fully charged. So I tried booting it and again, same response..gets through the boot splash screen, but goes black after. Pressing power button does nothing, doesn't even get the charge graphic to show up.
Info the 3rd: I left it be this time thinking maybe it was just really laggy or something, but after 15 minutes, still nothing. But I can feel a bit of heat as if it is on.
Info the 4th: I can get into bootloader and recovery fine. I was even able to make a backup (only thing I could think to do in there that would take some time and not risk screwing it up more) So it's not a battery issue, seems to be something with the rom.
Please help
Even though the phone is rooted and custom rom, can I take it back to Verizon? I've only had the phone since December. If I could do that, is there any way to get all the pics off of it first?
try to flash stock image from google
Cristi_10 said:
try to flash stock image from google
Click to expand...
Click to collapse
Silly question, but how would I go about getting that? And can I get it to the phone without the phone being able to boot
VooDooCC said:
Silly question, but how would I go about getting that? And can I get it to the phone without the phone being able to boot
Click to expand...
Click to collapse
deja vu.....million times.
with a little search i found this http://forum.xda-developers.com/showthread.php?t=1626895
Was able to wipe data/cache and re-flash the rom. Seems to be working for now. I think I'll go back to stock (thanks for the link samersh) and see if I'm still having issues.

NEED SERIOUS HELP! QHSUSB_DLOAD Brick

I was messing around with my phone and entered recovery mode (PhilZ Touch) and I kept tapping the empty part of the screen. Then the screen turned off, but on again after a few seconds. Then the phone wouldn't boot past recovery mode. I was stuck!
I researched the problem online and found another forum that posted a flashable "fix". So, I flashed it and then to my horror, realized that the zip was meant for a completely different phone!
Now my phone won't display anything on the screen, won't enter into Bootloader/Download Mode nor Recovery. I can't even do a Cold Reboot!
When I plug the phone into my computer though, Windows makes the USB connected dinging sound and attempts to install drivers but fails. In Device Manager, there is now a QHSUSB_DLOAD entry that appears and disappears depending on whether my phone is plugged in or not.
Does anyone know how to fix this and get the phone up and running again?
Preferably ASAP!? I literally have no phone... not even a landline!
Bro am in tha same boat...am about to send mines off to mobiletechvideos and they'll fix it for 50$ thats the only option ppl been saying...i tried the other way but its a headace and it dosent work for me ...
I ended up solving my problem, but not in the way I wanted. Since my phone was 100% dead, I went back to ATT since it was still under warranty. I told them a story about how the phone had been malfunctioning lately and then just completely died. They replaced the phone under warranty, so now I have a brand new one.
There definitely doesn't seem to be any easy way out of this problem once it strikes. I still don't know what happened to make the phone unable to boot out of recovery, even after wiping stuff, factory reseting, and reflashing roms. All I do know is that I have never had a problem with PhilZ until I started to rapidly tap the blank part of the screen (I like how it vibrates... I'm weird like that). This caused the recovery to never want to exit. Every time I reboot the phone, it automatically went to recovery, even after a full power off or battery pull.
Nevertheless, I am still going to root and mod my phone... just carefully.
You have a hard brick, which is nearly impossible to fix.
Sent from my LG-E980 using Tapatalk

Phone only stays shows Sony Logo for a second and shut off

Hey guys.
I am having a problem with my phone (C6503) is when I boot up my phone, it will show the Sony logo for a second and shut off again. When I plug my phone into the charger, it will do this in a loop.
This all started when I flashed MIUI v5 from here (I have a locked bootloader, and it can't be unlocked): ( http://forum.xda-developers.com/showthread.php?t=2520793 ) and I was simply using it one time and it was suddenly shutting off on me. The phone would also would also say the battery was at 85% then shut off on me and when I turned it back on, it said it was 5%. It got worse, when I powered on my phone while the charger was in, it would boot up, and when I unplugged the charger, it would shut off. Now, when I power on the phone, it displays the Sony logo for a second, and then shuts off.
Thankfully, I can still access Flashboot and FastBoot mode on the phone when it's plugged into a computer.
At first, I thought it was my ROM that I flashed earlier, so I tried flashing a stock ROM that I came from earlier. I tried a couple of stock ROMs and it didn't work, I also tried flashing stock kernels to it, too, and no change. I'm starting to think that my phone could possibly be dying on me from a hardware prospective instead of a software prospective, and it may not be the ROM I flashed earlier, since I was able to use it earlier before this started to happen.
Any help will be thanked.
I`m having the exact same problem (it started when I flashed the same rom, btw), did you find a way to solve this?
I have this problem too... my xperia is c6504 and I can't find a stock for it, I tried everything.. need help

Categories

Resources