Hello,
I dropped my One X the other day and the screen cracked in several places. I ordered an LCD and a new glass for the phone, but all the tutorials seem to stop once the phone gets taken apart. When I get the LCD, do I just put adhesive on the glass, stick it on, and put it back together? Or is there a different procedure I need to do?
Thanks.
LCD and glass should be bonded together, i.e., one unit, already.
When I ordered the LCD off Amazon, it didnt say that it came with glass. It would be great if it did though. If not, I still have an extra glass front. Would small drops of Gorilla Glue be strong enough to keep it adhered to the LCD panel?
Hi All,
I dropped my note 2 two weeks ago and the screen was cracked.
The touch screen is still functional, so I ordered a replacement of the glass, followed the iFixit tutorial to disassemble it, used a heat gun to peel it off and applied the replacement on top of the digitizer.
However, the original adhesive was sticked to the old glass and was not possible to recycle. I tried to find a 3M sticker on eBay for Note 2, but there is none. I'm wondering whether I can put some kind of liquid glue between the digitizer and the glass, or a bigger 3M sticker then cut it with knife.
Thank you for your help!
Isonomia
Elmers
Look for double sided tape. I think there's a link to the type you need on. Ifixit
Sent from my SAMSUNG-SGH-I317 using xda premium
More specifically, 3M 300LSE. You can buy a sheet for 5-ish dollars on ebay that has enough material to do a few phones.
You can use the glass for a template/stencil. Also don't forget to cut out the speaker/microphone holes. You wouldn't believe how it can mute the ear speaker. Or how hard it is to figure out that you've done that and not somehow left the speaker unplugged...
Thank you so very much for the info!
Has anyone had to replace their screen? If so, where did you buy your screen from? I have been looking on eBay and have found decent prices. I just worry about buying stuff from China / Hong Kong that might not work. If you have replaced your screen, or you know a place that sells reputable parts, please let me know!!!
Have you pulled the screen yet and got the part numbers?
Sent from my GT-N7000 using XDA Premium HD app
I bought a very cheap Galaxy Note 10.1 with a cracked glass at eBay. At the same time I bought a replacement glass also at eBay.
When I received the tablet I noticed there was really no need to replace the glass since the crack was outside the viewing area and didn't affected at all visibility or touch.
Even so, I decided to change the glass because the tablet was white and the glass I ordered was black and I find it much better for watching movies and also the white border tends to darken the colours when using a paint program. (so now my tablet is unique: black in the front, white in the back
The Note is very easy to disassemble if you have the adequate tools for opening plastic cases. It is very modular so it is all a matter of removing connectors and taking pieces out. Finally you have the front case and the glass and here is the difficult thing because the glass is glued to the case so you have to apply heat with a heat gun on low or a hair dryer on high until the glue becomes soft and easy to separate. even so, I broke my old glass even more when trying to remove it. It may be Gorilla glass, very resistant to scratches, but it is thin as hell, very fragile.
Placing the new glass was much easier. It comes with glue and screen protectors on both sides.
My only concern was the original glass had a thin layer of dark grey EVA all around the screen that I suppose is for cushioning the gap between the glass and the LCD and the replacement glass didn't have it. But I haven't had any problem with the new glass and apparently, all the replacement glasses I've seen don't have this EVA layer. Tactile detection is perfect, just like the original.
Here is the link to the seller:
/itm/TOUCH-SCREEN-DIGITIZER-GLASS-SAMSUNG-GALAXY-NOTE-10-1-GT-N8000-N8010-N8013-/330897546168?pt=UK_Replacement_Parts_Tools&hash=item4d0b07dbb8
If anybody knows about how to add the thin layer of EVA or somebody who sells it, please, leave a reply.
A great guide about how to disassemble the Note can be found in IFIXIT:
/Teardown/Samsung+Galaxy+Note+10.1+Teardown/10144/1
Sorry about the broken links. As I am new, the forum doesn't let me post them. Just add the root URL of the mentioned site
jedikalimero said:
I bought a very cheap Galaxy Note 10.1 with a cracked glass at eBay. At the same time I bought a replacement glass also at eBay.
When I received the tablet I noticed there was really no need to replace the glass since the crack was outside the viewing area and didn't affected at all visibility or touch.
Even so, I decided to change the glass because the tablet was white and the glass I ordered was black and I find it much better for watching movies and also the white border tends to darken the colours when using a paint program. (so now my tablet is unique: black in the front, white in the back
The Note is very easy to disassemble if you have the adequate tools for opening plastic cases. It is very modular so it is all a matter of removing connectors and taking pieces out. Finally you have the front case and the glass and here is the difficult thing because the glass is glued to the case so you have to apply heat with a heat gun on low or a hair dryer on high until the glue becomes soft and easy to separate. even so, I broke my old glass even more when trying to remove it. It may be Gorilla glass, very resistant to scratches, but it is thin as hell, very fragile.
Placing the new glass was much easier. It comes with glue and screen protectors on both sides.
My only concern was the original glass had a thin layer of dark grey EVA all around the screen that I suppose is for cushioning the gap between the glass and the LCD and the replacement glass didn't have it. But I haven't had any problem with the new glass and apparently, all the replacement glasses I've seen don't have this EVA layer. Tactile detection is perfect, just like the original.
Here is the link to the seller:
/itm/TOUCH-SCREEN-DIGITIZER-GLASS-SAMSUNG-GALAXY-NOTE-10-1-GT-N8000-N8010-N8013-/330897546168?pt=UK_Replacement_Parts_Tools&hash=item4d0b07dbb8
If anybody knows about how to add the thin layer of EVA or somebody who sells it, please, leave a reply.
A great guide about how to disassemble the Note can be found in IFIXIT:
/Teardown/Samsung+Galaxy+Note+10.1+Teardown/10144/1
Sorry about the broken links. As I am new, the forum doesn't let me post them. Just add the root URL of the mentioned site
Click to expand...
Click to collapse
Hey sorry i know this thread been dead for over a year but i just smashed my note 10.1 2012 glass and found some on online for ~15 bucks. The one i found is for Model gt-n8010 and mine is gt-n8013. My question is will the glass fit/work on my n8013 if the description says 8010. Thx in advance
VenpaCasa said:
Hey sorry i know this thread been dead for over a year but i just smashed my note 10.1 2012 glass and found some on online for ~15 bucks. The one i found is for Model gt-n8010 and mine is gt-n8013. My question is will the glass fit/work on my n8013 if the description says 8010. Thx in advance
Click to expand...
Click to collapse
Yes it should work fine. I just replaced mine and the description for the part said, for GT-N 8000 covering Gt-N 8010, 8013 etc. The part worked great.
VenpaCasa said:
Hey sorry i know this thread been dead for over a year but i just smashed my note 10.1 2012 glass and found some on online for ~15 bucks. The one i found is for Model gt-n8010 and mine is gt-n8013. My question is will the glass fit/work on my n8013 if the description says 8010. Thx in advance
Click to expand...
Click to collapse
The same glass will work for models 8000, 8010 and 8013. The difference between them is the 3G connectivity so it doesn't affect the glass design (it could have not been necessarily the case, but it does. A good example of not taking anything for granted is the Galaxy S3 where the screen bezel is different from 3G to 4G version)
jedikalimero said:
The same glass will work for models 8000, 8010 and 8013. The difference between them is the 3G connectivity so it doesn't affect the glass design (it could have not been necessarily the case, but it does. A good example of not taking anything for granted is the Galaxy S3 where the screen bezel is different from 3G to 4G version)
Click to expand...
Click to collapse
Here have a thumbs up! Do I need special tools is there a kit I can buy? I've done this before but on other devices and it was a while ago I just don't want to damage/scratch the body. It's only the screen that's shattered. If there is a kit can u point me in the right direction?
Sent from my SM-N900P using Xparent Skyblue Tapatalk 2
VenpaCasa said:
Here have a thumbs up! Do I need special tools is there a kit I can buy? I've done this before but on other devices and it was a while ago I just don't want to damage/scratch the body. It's only the screen that's shattered. If there is a kit can u point me in the right direction?
Sent from my SM-N900P using Xparent Skyblue Tapatalk 2
Click to expand...
Click to collapse
In ifixit there is a very good tear-down of the Galaxy Note 10.1 where you can clearly see the process for opening the tablet and accessing the glass:
https://www.ifixit.com/Teardown/Samsung+Galaxy+Note+10.1+Teardown/10144
Basically you remove the silver piece where the camera is, then the back plate, and then you begin to remove components (battery, motherboard, speakers, cameras, docking port, audio jack, etc) until you have just the frame, the glass and the LCD. Then you have to break some plastic fasteners to get loose the metal frame and release the LCD. At that point you have the silver plastic bezel with the glass attached to it. Applying heat with a hair-dryer to loosen the glue, remove the broken glass and then apply the new one. Then follow the reverse process to get everything inside again.
You can test the tablet with just the glass, LCD, motherboard and battery to check the screen is working OK. Then disconnect the battery again and put back the rest of the components. Another check before closing the back plate and there you go.
As for tools, you will need a screwdriver for the screws, a guitar prick for the back plate and some flat plastic tool to release the internal connectors. You can see the tools in the pictures of the tear-down.
One last thing: make sure the glass you order includes the touch sensor. The glass alone is of no use (still there are people who sell it)
bezel
jedikalimero said:
In ifixit there is a very good tear-down of the Galaxy Note 10.1 where you can clearly see the process for opening the tablet and accessing the glass:
https://www.ifixit.com/Teardown/Samsung+Galaxy+Note+10.1+Teardown/10144
Basically you remove the silver piece where the camera is, then the back plate, and then you begin to remove components (battery, motherboard, speakers, cameras, docking port, audio jack, etc) until you have just the frame, the glass and the LCD. Then you have to break some plastic fasteners to get loose the metal frame and release the LCD. At that point you have the silver plastic bezel with the glass attached to it. Applying heat with a hair-dryer to loosen the glue, remove the broken glass and then apply the new one. Then follow the reverse process to get everything inside again.
You can test the tablet with just the glass, LCD, motherboard and battery to check the screen is working OK. Then disconnect the battery again and put back the rest of the components. Another check before closing the back plate and there you go.
As for tools, you will need a screwdriver for the screws, a guitar prick for the back plate and some flat plastic tool to release the internal connectors. You can see the tools in the pictures of the tear-down.
One last thing: make sure the glass you order includes the touch sensor. The glass alone is of no use (still there are people who sell it)
Click to expand...
Click to collapse
Does anyone know where to find a front bezel? I did see the one from parts4all or whatever its called overseas with shipping as much as it costs and god knows when it would arrive- I cannot seem to find any.
Removing the back cover and fixing an unresponsive touch screen.
My daughter decided to drop her 80 Cobalt leaving the screen unresponsive but not broken.
After re-flashing the firmware and ruling out a software issue, I decided to open the case and have a look inside. With a bit of playing about I discovered the matt plastic back panel can easily be unclipped from the shiny plastic surround.
First remove the single tiny crosshead screw from under the sdcard flap. Then unclip the panel using strong fingernails or a thin plastic tool. Work from the speaker end and hinge it up at the camera end as there are four tabs there that locate under the curved shiny plastic part.
Inside there are two rectangles of plastic sticky tape in the same place, under one of those is the touch screen ribbon. I removed the plastic tape and found the ribbon was unseated, I just pushed it back into the connector and replaced the plastic tape, which appears to be the only thing holding it in place. The touch screen sprang back into life.
Replace the back cover and small screw. Job done.
It should only take a few minutes to repair.
After the digitizer connector is snapped into place and screwed down, is it wise to test it before applying adhesive or does that little strip that sticks out to the side (for grounding) have to be firmly placed/taped down first? I basically want to be sure the screen works before adhesive and tape are applied. Good or bad idea?
Update: Dry fit went well for testing. Used a precision-cut adhesive and peeled off the protective plastic after testing to seat the new screen replacement. Cracked But Not Forgotten brand. Zero problems.