I just installed Trinity Vengeance RaptorXL custom rom. Under Settings>TRINITY MOD>CPU control there is Max and min clock freq., governor and I/O scheduler.
What are highest and most safe overclock settings here?
1.7 ghz I think
Sent from my heart
Related
Hey guys, what CPU settings do you use? And which one would be best for smooth performance?
Min 120 MHz
Max 806 MHz
Smartass noop
(no-frills CPU control)
Smartass2 covernor.
Minimum: 122 Mhz, but I use 200 Mhz
Maximum: 806 MHz, but on some devices, when browsing for example, your phone can hang.
(Nothing works = kernel panic). You then need to lower it. I use 768 Mhz.
For benchmarking, use performance governor. Your CPU will then keep on highest frequency
Hope it helped
Smartass2:
Min 245mhz when sleep mode
Max 806mhz
Mine WS freeze on any frequency above 600 mhz.
Sent from UNLOCKED Wildfire S CM7.2
d3tr0 said:
Smartass2:
Min 245mhz when sleep mode
Max 806mhz
Click to expand...
Click to collapse
Yes these are my preferred settings too.
120mhz minimum
806mhz maximum
hope this helps!
What is the best overclock settings(min,max,scheduler,governer) for my arc s that will give a good balance of smoothness and battery drain?
Thanks in advance,
Vin Low
Smart Ass 2 & Noop.
Min 245 & Max 1.6 or 1.4 {Default} Ur Wish.
Depends
The settings depends on your usage of mobile.
Try different combinations and let you know the speed, battery backup etc.,
My settings are
I/O Scheduler - bfq
Governer - smartassV2
Min - 245
Max - 1.4ghz {default} - Arc / 1.6 ghz {default} - Arc S
Hit "Thanks" if anyone helped you.:good:
-----------------------------------------------------------------------------------------
Xperia Arc LT15i
Rooted/BootLoader Unlocked
Running JellyBean - FXP135/CM10
vinrex said:
What is the best overclock settings(min,max,scheduler,governer) for my arc s that will give a good balance of smoothness and battery drain?
Thanks in advance,
Vin Low
Click to expand...
Click to collapse
245 MHz~1,6 GHz
SmartassV2
Deadline
XArc Kernel by Sirkay
Click "thanks"
Sent from my Samsung Galaxy Tab 2 10.1 with CM10 using XDA Premium HD
I use 245 - 1305 with conservative and it's awesome.
I had it at 245 - 786 with conservative and it was pretty laggy, but the same config with ondemand was pretty good.
what is the best configuration to play without lag
GOVERNOR? and I / O SCHEDULER?
freq:?
kernel .587 adv or lupus or other
TiagoRigueto said:
what is the best configuration to play without lag
GOVERNOR? and I / O SCHEDULER?
freq:?
kernel .587 adv or lupus or other
Click to expand...
Click to collapse
- Performance
- Noop
- highest frequency possible
Sent from Xperia Arc S
use lupus kernel for performance..
If you're wanting the best possible kernel & rom for gaming then use one of the gingerbread roms.
but perfomance consume much battery....
i need config for use daily.......but no lag ..
i use 368mhz min
1500mhz max...
governor intellidemand
i/o scheduller = noop
TiagoRigueto said:
but perfomance consume much battery....
i need config for use daily.......but no lag ..
i use 368mhz min
1500mhz max...
governor intellidemand
i/o scheduller = noop
Click to expand...
Click to collapse
just buy another battery
Hello!
I have a question regarding CPU and GPU relation while overclocking/undervolting.
I am using XM-Kernel #241 - love it.
The thing is GPU is at 520MHz default and if I set CPU at 1500MHz it will run like this:
CPU 1500MHz
GPU 520MHz
So what happens if I set the CPU down for instance to 1200MHz. Will GPU still stick to 520MHz or not?
Because when I underclock the CPU, the GPU performance drops too (benchmarks results).
So whats the thing about it?
What about undervolting?
XM-kernel #241 has an option to seperately undervolt GPU. Does that mean that while undervolting CPU - GPU voltage is intact? And when we seperately undervolt GPU - CPU voltage is intact?
I always thought that if you undervolted CPU, GPU voltage changed aswell.
Thank you for anwers in advance
miHah said:
Hello!
I have a question regarding CPU and GPU relation while overclocking/undervolting.
I am using XM-Kernel #241 - love it.
The thing is GPU is at 520MHz default and if I set CPU at 1500MHz it will run like this:
CPU 1500MHz
GPU 520MHz
So what happens if I set the CPU down for instance to 1200MHz. Will GPU still stick to 520MHz or not?
Because when I underclock the CPU, the GPU performance drops too (benchmarks results).
So whats the thing about it?
What about undervolting?
XM-kernel #241 has an option to seperately undervolt GPU. Does that mean that while undervolting CPU - GPU voltage is intact? And when we seperately undervolt GPU - CPU voltage is intact?
I always thought that if you undervolted CPU, GPU voltage changed aswell.
Thank you for anwers in advance
Click to expand...
Click to collapse
try to ask in xmkernel thread it's better
Hi,
i was wondering what would be best option to set for processor on gio,
currently im on maclaw's 4.0.4 aosp,
i wonder whats best settings for:
governor;
minimum and maximum speed's
i/o mode
and potentially best app for performance governance
Max 902MHZ
Min 320MHZ
Governor: userspace
I/O: deadline
Used on MMB ASOP ICS 4.0.4
Ps.
If u think your CPU will fried up use 883MHZ max speed :thumbup:
Sent from my GT-S5660 using xda app-developers app
best app is no frills cpu available in the play store.
for max frequency dont go past 902, afther that for me the phone becomes unstable
Max: 883
Min: 245
Gov: smartassv2
I/o: noop
the most stable frequency of all time on all roms.