Hi, I flashed darkside super wipe, It flashed ok after flashing i installed slimbean rom and gapps then i reboot. After reboot i entered into CWM 6.0.3.1 touch and when i tried to install any flashable zip file it just freezes at installing....
I tried couples of times but result was same
what happened and what can i do?
HQuser said:
Hi, I flashed darkside super wipe, It flashed ok after flashing i installed slimbean rom and gapps then i reboot. After reboot i entered into CWM 6.0.3.1 touch and when i tried to install any flashable zip file it just freezes at installing....
I tried couples of times but result was same
what happened and what can i do?
Click to expand...
Click to collapse
You are not supposed to use darkside wipes with CWM 6. Odin flash your recovery tar file. If that doesn't work you may have to Odin the stock ROM.
meekrawb said:
You are not supposed to use darkside wipes with CWM 6. Odin flash your recovery tar file. If that doesn't work you may have to Odin the stock ROM.
Click to expand...
Click to collapse
ouch, sorry im actually new o this device so i didnt knew it neither it was stated in official darkside wipe thread... I will flash CWM via odin and will report shortly.
Edit: Thank you very much its working now
same problem on shv e110s
i have same problem,after flashing darkside wipe cwm doesnt working well.. i have flashed cwm 5 and 6 via odin still it is not working.. plz help me:fingers-crossed::crying:
snlsapkota said:
i have same problem,after flashing darkside wipe cwm doesnt working well.. i have flashed cwm 5 and 6 via odin still it is not working.. plz help me:fingers-crossed::crying:
Click to expand...
Click to collapse
try TWRP?
couldnt find twrp..
i searched twrrp.tar flashable for my device shv e110s ..but i couldnt find ..plz help me to find it..
Related
right ima cut to the chase
i used to use cyanogen mod 10 but wanted a official rom from sam mobile so i flashed via odin and cocked up my note 2 n7100
now i can get into recovery and download mode and i have flashed the same cm10 via tw recovery and it hangs on boot animation
i then wiped and flashed via recovery SSHD rom and it also hangs at boot animation so what do you guys think is wrong?
i need this fixed it cost way too much to just thow in the junk draw espcially since i cant work anymore.
thanks
-FatBoyNate
When you change your rom you need to wipe data from recovery.
FatBoyNate said:
right ima cut to the chase
i used to use cyanogen mod 10 but wanted a official rom from sam mobile so i flashed via odin and cocked up my note 2 n7100
now i can get into recovery and download mode and i have flashed the same cm10 via tw recovery and it hangs on boot animation
i then wiped and flashed via recovery SSHD rom and it also hangs at boot animation so what do you guys think is wrong?
i need this fixed it cost way too much to just thow in the junk draw espcially since i cant work anymore.
thanks
-FatBoyNate
Click to expand...
Click to collapse
Always flash custom rom through custom recoverys only (not from stock rom). Flash TWRP or CWR or Philz recovery first and then flash custom rom.
After flashing custom rom or stock rom, first wipe data and cache (as above said) before rebooting.
sent from my GT-N7100. Press thanks if I helped..
MBariya said:
Always flash custom rom through custom recoverys only (not from stock rom). Flash TWRP or CWR or Philz recovery first and then flash custom rom.
After flashing custom rom or stock rom, first wipe data and cache (as above said) before rebooting.
sent from my GT-N7100. Press thanks if I helped..
Click to expand...
Click to collapse
i have flashed a custom rom through a custom recovery, i've been flashing custom roms since the htc himalaya and never had a booting problem.
i think i snuffed the bootloader can anyone give a me a stock nandroid?
OR
guide me as how to get past the 2nd boot logo, i also flashed a core 2 kernel and that's when i think the damage was done, if it will fix this, where can i get the stock kernel?
[EDIT] atm it has SSHD ROM and The SSHD Kernel i get the samsung n7100 logo and then the boot animation but then it gets stuck.
FatBoyNate said:
i have flashed a custom rom through a custom recovery, i've been flashing custom roms since the htc himalaya and never had a booting problem.
i think i snuffed the bootloader can anyone give a me a stock nandroid?
OR
guide me as how to get past the 2nd boot logo, i also flashed a core 2 kernel and that's when i think the damage was done, if it will fix this, where can i get the stock kernel?
[EDIT] atm it has SSHD ROM and The SSHD Kernel i get the samsung n7100 logo and then the boot animation but then it gets stuck.
Click to expand...
Click to collapse
same has happened to me.
FatBoyNate said:
i have flashed a custom rom through a custom recovery, i've been flashing custom roms since the htc himalaya and never had a booting problem.
i think i snuffed the bootloader can anyone give a me a stock nandroid?
OR
guide me as how to get past the 2nd boot logo, i also flashed a core 2 kernel and that's when i think the damage was done, if it will fix this, where can i get the stock kernel?
[EDIT] atm it has SSHD ROM and The SSHD Kernel i get the samsung n7100 logo and then the boot animation but then it gets stuck.
Click to expand...
Click to collapse
ItzMar said:
same has happened to me.
Click to expand...
Click to collapse
get into recovery flash this file http://d-h.st/fWr u will loose evrything from internal memory, now after it reboot to recovery just flash your rom but dont reboot after installation.
first click fix permission
then wipe cache and dalvik atleast twice
then reboot!
it should load the rom fine, and i would suggest to stay with philz recovery and create a backup of efs and rom both the terminal way and through recovery too
shhbz said:
get into recovery flash this file http://d-h.st/fWr u will loose evrything from internal memory, now after it reboot to recovery just flash your rom but dont reboot after installation.
first click fix permission
then wipe cache and dalvik atleast twice
then reboot!
it should load the rom fine, and i would suggest to stay with philz recovery and create a backup of efs and rom both the terminal way and through recovery too
Click to expand...
Click to collapse
once i flashed it i gete:error opening 'data/dontpanic'
e:error I/O error
it didnt reboot. do i click reboot system after flashing your file?
ItzMar said:
once i flashed it i gete:error opening 'data/dontpanic'
e:error I/O error
it didnt reboot. do i click reboot system after flashing your file?
Click to expand...
Click to collapse
I hope u are rooted and have a custom recovery installed if yes then its a script to clean wipe the rom to start a fresh install better known as dirty flash so when u flash the zip it will wipe ur cache, dalvik, system on recover and will automatically reboot to recovery then u can proceed wth any custom rom u want the latest philz recovery is recommended.i am using my phn yo reply and already 4am morning here so be sure what you are doing , give complete info of ur phn status as wht u hv done till now if u have all as mentioned abv then u r good to go and flash, but in ur case the flash of the file was not successful so u can manually wipe all mentined above and procced as instructed.
Its an instruction for custom rom and recovery if u have stock then just wipe cache and dalvik and try booting up.
Off to sleep
If you are unsure of what u r doing then try to get hands on odin and flash stock rom ,as messing up to much may damage ur pit partition
shhbz said:
I hope u are rooted and have a custom recovery installed if yes then its a script to clean wipe the rom to start a fresh install better known as dirty flash so when u flash the zip it will wipe ur cache, dalvik, system on recover and will automatically reboot to recovery then u can proceed wth any custom rom u want the latest philz recovery is recommended.i am using my phn yo reply and already 4am morning here so be sure what you are doing , give complete info of ur phn status as wht u hv done till now if u have all as mentioned abv then u r good to go and flash, but in ur case the flash of the file was not successful so u can manually wipe all mentined above and procced as instructed.
Its an instruction for custom rom and recovery if u have stock then just wipe cache and dalvik and try booting up.
Off to sleep
If you are unsure of what u r doing then try to get hands on odin and flash stock rom ,as messing up to much may damage ur pit partition
Click to expand...
Click to collapse
:angel:Saviour!:angel:
Thank you so much. All is well now. :highfive:
I try to flash Novum_Initium_AmnoSferumRom_1.0.0_N7100XXDMG1 in recovery but the Rom apeare to have some problem now I cant restrore my backup Rom but it say MD5 mismatch and I try to reflash Phill Recovery with Odin but no suces after flash my phone are not go in recovery automat.I cant flash any Rom I thing I lost my root
I dont now what to do if you have any ideea plase help my.
adinfsfocus said:
I try to flash Novum_Initium_AmnoSferumRom_1.0.0_N7100XXDMG1 in recovery but the Rom apeare to have some problem now I cant restrore my backup Rom but it say MD5 mismatch and I try to reflash Phill Recovery with Odin but no suces after flash my phone are not go in recovery automat.I cant flash any Rom I thing I lost my root
I dont now what to do if you have any ideea plase help my.
Click to expand...
Click to collapse
ROM is fine and normal,problem is with ur side.
1.Which recovery u had while installing amno rom?
2.Did u flashed philz using odin, but still get stock recovery?
mannyvinny said:
ROM is fine and normal,problem is with ur side.
1.Which recovery u had while installing amno rom?
2.Did u flashed philz using odin, but still get stock recovery?
Click to expand...
Click to collapse
I have Phill recovery when I flash Amo Rom .
I flash Phill using odin and it say succes but is not going automatic intro recovery after flash I have to do manualy.
adinfsfocus said:
I have Phill recovery when I flash Amo Rom .
I flash Phill using odin and it say succes but is not going automatic intro recovery after flash I have to do manualy.
Click to expand...
Click to collapse
So whats wrong if it doesn't boot into recovery automatically? if its installed then no need to worry..
btw get the latest philz reovery from here
philz recovery
mannyvinny said:
So whats wrong if it doesn't boot into recovery automatically? if its installed then no need to worry..
btw get the latest philz reovery from here
philz recovery
Click to expand...
Click to collapse
I instal the last recovery but I cant instal any rom it say cant open and when I try to rebot the phone it say
cant be done
no
no
root your android(system/........
no
I chose root but I got bootlop to logo phone and nothing is hapening.
Does your device boot normally ?
Have you tried to flash stock ROM?
dr.ketan said:
Does your device boot normally ?
Have you tried to flash stock ROM?
Click to expand...
Click to collapse
Thank you Dr.Ketan
The phone stay on logo when I try to open
Before I flash the Rom I was on Tamirda rom and I do this:
-make backup of rom
-wipe everything
-format everything
-then I try to flash Amo rom
and afther that I have this problem.
I dont try to flash stok ROM.
If is posible please tell my what to flash an the priority order.
I will try to flash this is ok?
N7100XXDMF2_N7100OLBDMD2_XME - Malaysia
http://forum.xda-developers.com/showthread.php?t=2230250
Yeah you can flash it.
If it stuck to logo after flashing then just wipe cache and data (factory reset) from recovery.
Sent from my GT-N7100 using xda premium
dr.ketan said:
Yeah you can flash it.
If it stuck to logo after flashing then just wipe cache and data (factory reset) from recovery.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Ok thanks I will try my speed network is very low sow I have to wait 1 hour for complet download.
I will post afther I try to flash.
After I flash N7100XXDMF2_N7100OLBDMD2_XME - Malaysia is ok
Thank you dr.ketan.
Hi, I want to ask why I can't install DN3 v3 rom by using cwm philz 5.15
It's always show installation aborted or signature verification fail.
I from stock leak 4.3 N7100XXEMI6 without root
Here is my step to install this rom:
1. root through ordin
2. flash philz 5.15 recovery through ordin
3. full wipe including data, cache, dalvi cache
4. Fix permission
5. clear to install new rom
6. flash the DN3 v3 zip
*while installing zip file it always show installation aborted
*But if install other zip file everything go fine just have the problem on flashing custom rom
I was try many way but still get fail. hope some one can help me solve the problem.
updated 4.3official ane now wanna DN3 Rom v3.0
i just updated 4.3 official version :victory: but now i wanna DN3 Rom v3.0 :silly: so how can i flash give me detail for that
and ya do not update official 4.3 they dont give us any note 3 fetures ...:crying:
Issue flashing DN3 rom
Usually for flashing DN3 rom
1. root your device through ordin or stock recovery
2. flash cwm / twrp / phliz recovery
3. full wipe including data, cache, dalvi cache
4. fix permission
5. flash the DN3 rom (might need take some time)
6. Reboot
7. flash note 3 add on apps throught recovery
For my information is like that, but now i stuck on installing DN3 rom zip file while in philz recovery. always get installation aborted.
how to root in 4.3 official knox
yu133 said:
Usually for flashing DN3 rom
1. root your device through ordin or stock recovery
2. flash cwm / twrp / phliz recovery
3. full wipe including data, cache, dalvi cache
4. fix permission
5. flash the DN3 rom (might need take some time)
6. Reboot
7. flash note 3 add on apps throught recovery
For my information is like that, but now i stuck on installing DN3 rom zip file while in philz recovery. always get installation aborted.
Click to expand...
Click to collapse
but how to root ... installed 4.3 official version
patelsagar said:
i just updated 4.3 official version :victory: but now i wanna DN3 Rom v3.0 :silly: so how can i flash give me detail for that
and ya do not update official 4.3 they dont give us any note 3 fetures ...:crying:
Click to expand...
Click to collapse
it is easy to root ur phone just download these
CWM---- http://forum.xda-developers.com/showthread.php?t=1901196 [download the latest one with (.TAR) extension]
samsung usb drivers---google search for them
ODIN from here----http://forum.xda-developers.com/attachment.php?attachmentid=1168421&d=1341114315
now once u have all of the follow this video so that u can get every step
http://www.youtube.com/watch?list=UUA2XWPjQBJVScn7wQjeqMqA&feature=player_embedded&v=NFHZ535L7is
once ur done just update the superSU
thas for rooting need help to install the rom ask me:good:
Installing stopped at Page 1 of the Samsung apps
Hi there ppl,
I need some help.... i deleted everything, so now, my phone is romless.. n when i tried installing ditto note 3 (v3.1), the start up was ok, until u come to a page where u need to choose which apps you want to download.. i jus pressed next and it jus hanged there.. nothing was moving so i off and on my phone, and i tried again.. but yet, still cant install.. can anyone help... im frustrated here... hmmm....
BTW, i'm using the latest version of philz recovery, followed youtube link, and did exactly, but still... cant do much...
kalpeshneo said:
Hi there ppl,
I need some help.... i deleted everything, so now, my phone is romless.. n when i tried installing ditto note 3 (v3.1), the start up was ok, until u come to a page where u need to choose which apps you want to download.. i jus pressed next and it jus hanged there.. nothing was moving so i off and on my phone, and i tried again.. but yet, still cant install.. can anyone help... im frustrated here... hmmm....
BTW, i'm using the latest version of philz recovery, followed youtube link, and did exactly, but still... cant do much...
Click to expand...
Click to collapse
Just using previous philz touch recovery (Philz 5) and everything will works fine.
Using latest philz 6 will cause eror and hang (it happen to me too and it take a half day too realize the problem in the philz not the Rom )
yu133 said:
Hi, I want to ask why I can't install DN3 v3 rom by using cwm philz 5.15
It's always show installation aborted or signature verification fail.
I from stock leak 4.3 N7100XXEMI6 without root
Here is my step to install this rom:
1. root through ordin
2. flash philz 5.15 recovery through ordin
3. full wipe including data, cache, dalvi cache
4. Fix permission
5. clear to install new rom
6. flash the DN3 v3 zip
*while installing zip file it always show installation aborted
*But if install other zip file everything go fine just have the problem on flashing custom rom
I was try many way but still get fail. hope some one can help me solve the problem.
Click to expand...
Click to collapse
It sounds that you have a damaged file. Download the DN3 v3.1 ROM once it's complete verify its integrity using any MD5 checker tool.
kalpeshneo said:
Hi there ppl,
I need some help.... i deleted everything, so now, my phone is romless.. n when i tried installing ditto note 3 (v3.1), the start up was ok, until u come to a page where u need to choose which apps you want to download.. i jus pressed next and it jus hanged there.. nothing was moving so i off and on my phone, and i tried again.. but yet, still cant install.. can anyone help... im frustrated here... hmmm....
BTW, i'm using the latest version of philz recovery, followed youtube link, and did exactly, but still... cant do much...
Click to expand...
Click to collapse
Use Philz version 5.15, and clean all the data using Philz recovery. Do not select the option "Wipe Data" in the DN3 installer, this may cause your installation process to hang.
dvn2008 said:
It sounds that you have a damaged file. Download the DN3 v3.1 ROM once it's complete verify its integrity using any MD5 checker tool.
Use Philz version 5.15, and clean all the data using Philz recovery. Do not select the option "Wipe Data" in the DN3 installer, this may cause your installation process to hang.
Click to expand...
Click to collapse
Thanks guys for the help.. will download the philz 5.15 then and do it. anyways, ru guys having any problems with the ditto rom? does it hand when u multitask, etc?? coz i heard fr my frens that it hangs often...
appreciate your feedback guys. Thanks
ijsiregar said:
Just using previous philz touch recovery (Philz 5) and everything will works fine.
Using latest philz 6 will cause eror and hang (it happen to me too and it take a half day too realize the problem in the philz not the Rom )
Click to expand...
Click to collapse
I just signed up to say THANKYOU.... install Touchphilz 5!! it works than especially when you install DN3 v.3.1 or above!! thanks again!
Ditto Note 3 -> 3.2
DN3 rom work perfectly for me so far starting from v3 and now in v3.2.
I flashed DN3 rom in following sequence:-
(i) I came from MK4 Wanamlite previously and then I flash TWRP v2.6.0.3 via Odin
(ii) then I flashed MJ5 bootloader (downloaded from JoelDroid rom site) before installing DN3 rom
(iii)then I flashed DN3 v3 successfully.
With the DN3 v3.2 update, I tried dirty flash without wipe but hell lots of problems so finally I did full wipe, format data and then
clean install DN3 v3.2 anf all working perfectly so far including all the Note 3 features.
problem
hi
after i install dn3 ROM i can't make a call the imei is good but not registered to network
please help me
i got the same problem on 7105 Imei but no network, and stuck in factory mode, changing to on and running terminal script didnt help
i just updated 4.4.2 KK official version note 2 but now i wanna DN3 Rom without root..can i use DN3 rom feuture in my phn..
ota 3.2.1
Hi
I have one problem with OTA uppdate
I can't uppdate to 3.2.1
When I push uppdate , displays an error message
What is a problem?
yu133 said:
Usually for flashing DN3 rom
1. root your device through ordin or stock recovery
2. flash cwm / twrp / phliz recovery
3. full wipe including data, cache, dalvi cache
4. fix permission
5. flash the DN3 rom (might need take some time)
6. Reboot
7. flash note 3 add on apps throught recovery
For my information is like that, but now i stuck on installing DN3 rom zip file while in philz recovery. always get installation aborted.
Click to expand...
Click to collapse
Download the zip again and copy it on your sd card(maybe not copied well). This happens to me too
Hi this is a long post so I will highly appreciate it if anyone helps me even after reading this.
I was on xperia z-ized v3.4 (based on android 4.3) with mj5 as the bootloader. I was tired of that rom and wanted to try dn3 rom and downloaded the zip as well but the OP of the rom thread said that twrp recovery is recommended over cwm. So I went to thread given in the page which showed me how to flash twrp. It was just download the zip and flash it in recovery, which is exactly what I did. Now ever since then I am not able to turn on my phone, nor does it go to recovery, it just goes into download mode which made me change my decision. Now I am thinking to downgrade back to 4.1.2 and I will try dn3 rom later on. I downloaded the firmware from sammobile but just wanted to ask that given my previous firmwares and flashes, is it safe to flash or will I risk bricking my phone.
Thanks for reading this and please help me out if you can
RazaVakil7995 said:
Hi this is a long post so I will highly appreciate it if anyone helps me even after reading this.
I was on xperia z-ized v3.4 (based on android 4.3) with mj5 as the bootloader. I was tired of that rom and wanted to try dn3 rom and downloaded the zip as well but the OP of the rom thread said that twrp recovery is recommended over cwm. So I went to thread given in the page which showed me how to flash twrp. It was just download the zip and flash it in recovery, which is exactly what I did. Now ever since then I am not able to turn on my phone, nor does it go to recovery, it just goes into download mode which made me change my decision. Now I am thinking to downgrade back to 4.1.2 and I will try dn3 rom later on. I downloaded the firmware from sammobile but just wanted to ask that given my previous firmwares and flashes, is it safe to flash or will I risk bricking my phone.
Thanks for reading this and please help me out if you can
Click to expand...
Click to collapse
Well if you still want to try DN3 ROM you can flash philz recovery tar.md5 via odin and then once you boot into recovery you can get twrp zip file that you downloaded previously and flash twrp over philz.That's what i do when i switch recoveries.I never used CWM except when i was on 4.1.2 but once i rooted my phone the same day i switched to philz.If you don't want to try dn3 at the moment yes you can go back 4.1.2 since you are on mj5 bootloader which makes downgrading back to 4.1.2 possible.I'm giving you links below for philz tar.md5 and instructions on how to flash it via odin incase you change your mind.
philz tar.md5
Put your phone into download mode,open odin on pc,uncheck auto reboot in odin,dont touch anything else,connect phone to pc,wait for port ID to lit up and be blue.Select the AP/PDA tab and navigate to flash this downloaded philz tar file.Click start and you are done.Exit odin on pc.Pull battery out your phone.Wait a minute then put it back in and manually enter recovery mode your newly flashed philz recovery will load.Now go and install twrp recovery zip file and select "reboot recovery" in philz advanced options.Your twrp recovery will load.Do all the wipes in twrp by going under advanced wipe (dont wipe external sd and otg) this will fully wipe your internal phone memory clean then go back to main menu and flash DN3.Enjoy.
singhpratik87 said:
Well if you still want to try DN3 ROM you can flash philz recovery tar.md5 via odin and then once you boot into recovery you can get twrp zip file that you downloaded previously and flash twrp over philz.That's what i do when i switch recoveries.I never used CWM except when i was on 4.1.2 but once i rooted my phone the same day i switched to philz.If you don't want to try dn3 at the moment yes you can go back 4.1.2 since you are on mj5 bootloader which makes downgrading back to 4.1.2 possible.I'm giving you links below for philz tar.md5 and instructions on how to flash it via odin incase you change your mind.
philz tar.md5
Put your phone into download mode,open odin on pc,uncheck auto reboot in odin,dont touch anything else,connect phone to pc,wait for port ID to lit up and be blue.Select the AP/PDA tab and navigate to flash this downloaded philz tar file.Click start and you are done.Exit odin on pc.Pull battery out your phone.Wait a minute then put it back in and manually enter recovery mode your newly flashed philz recovery will load.Now go and install twrp recovery zip file and select "reboot recovery" in philz advanced options.Your twrp recovery will load.Do all the wipes in twrp by going under advanced wipe (dont wipe external sd and otg) this will fully wipe your internal phone memory clean then go back to main menu and flash DN3.Enjoy.
Click to expand...
Click to collapse
Thanks a lot for the help, unfortunately I didn't like dn3 that much so tried to go back to stock but odin shows fail, so stuck with dn3 for a while until I find a solution
RazaVakil7995 said:
Thanks a lot for the help, unfortunately I didn't like dn3 that much so tried to go back to stock but odin shows fail, so stuck with dn3 for a while until I find a solution
Click to expand...
Click to collapse
Well try other 4.4.2 custom TW rom,dn3 isn't the only ROM available on xda for our note II.Look around and I am sure you'll find something that suits you.
singhpratik87 said:
Well try other 4.4.2 custom TW rom,dn3 isn't the only ROM available on xda for our note II.Look around and I am sure you'll find something that suits you.
Click to expand...
Click to collapse
Actually to be honest I want to go back to stock but I odin shows fail, so is there any workaround for that.
PS: even dn3 doesn't boot up now after flashing. Stuck on the note II logo. Tried wiping cache, dalvik cache and factory reset but to no avail
RazaVakil7995 said:
Actually to be honest I want to go back to stock but I odin shows fail, so is there any workaround for that.
PS: even dn3 doesn't boot up now after flashing. Stuck on the note II logo. Tried wiping cache, dalvik cache and factory reset but to no avail
Click to expand...
Click to collapse
Well which recovery are you using now?TWRP?Do you have a back up of any ROM? I suggest go under advanced wipe and wipe everything except external sd card and otg.This will fully wipe your phone.Other suggestion is flashing stock 4.4.2 ROM and then trying custom ROM.
singhpratik87 said:
Well which recovery are you using now?TWRP?Do you have a back up of any ROM? I suggest go under advanced wipe and wipe everything except external sd card and otg.This will fully wipe your phone.Other suggestion is flashing stock 4.4.2 ROM and then trying custom ROM.
Click to expand...
Click to collapse
Tried whatever you said just now, still not booting up. I am on philz recovery and I did not take any backup. I only have stock 4.1.2 rom which is not getting flashed via odin and I cannot download stock 4.4.2 because my internet connection is slow..
what should I do?
i have a note 2 gt7100 with phantom rom and nadia kernel now is on a bootloop i did wipes and flashed 4.1.2 and then 4.3 stock but still in bootloop
Similar problem: Stuck in bootloop
Shady95 said:
i have a note 2 gt7100 with phantom rom and nadia kernel now is on a bootloop i did wipes and flashed 4.1.2 and then 4.3 stock but still in bootloop
Click to expand...
Click to collapse
Seniors Pls help!
I was on stock ROM till now and one fine day my Note 2 suddenly switched off and since then its in bootloop. I tried everything(almost), flashing the latest firmware from sammobile, rooting, custom ROMs...nothing is working! The custom ROM and Bootloader installs using odin end with 'SW REV. Invalid magic string' or 'SW REV. check fail'.
Please suggest and point in the right direction.
pickup a stock rom first and flash it.
then, install any rom
Anderso said:
pickup a stock rom first and flash it.
then, install any rom
Click to expand...
Click to collapse
when i try to wipe or format data i get an error i think this is the problem...
Shady95 said:
i have a note 2 gt7100 with phantom rom and nadia kernel now is on a bootloop i did wipes and flashed 4.1.2 and then 4.3 stock but still in bootloop
Click to expand...
Click to collapse
i think....
nadia kernel is only Android 4.4
Strawberry_dev said:
i think....
nadia kernel is only Android 4.4
Click to expand...
Click to collapse
Phantom rom worked fine with Nadia now i'm monting 4.3 stock but still in bootloop and i flashed CWM recovery... when i format or wipe data i get an error: error mounting/ data
... someone can give me .pit file try to perform a repartiotion?
try again flash with the Team Win recovery.
Trying to flash stock rom via odin..
enyaman said:
try again flash with the Team Win recovery.
Click to expand...
Click to collapse
ok i try but i have already tried with CWM and didn't work and also i have tried flash 4.3 with .pit file to perform a repartition but nothing...
Do this flash latest twrp or philz recovery wipe everything flash phantom only and reboot recovery than wipe cache and dalvik cache flash rom again only now reboot to system , if it doesn't work than try older version of twrp or philz supporting 4.3