So I tried updating from a CM10 nightly to CM10.1 RC5 today. It went did not end well.
I extracted the boot.img from the zip and ran "fastboot flash boot boot.img", I then ran "fastboot erase cache". However, when I rebooted into hboot I noticed that it still said H-BOOT-1.12.0000, I then tried to just boot into standard CM again, which hangs on the boot animation.
I've tried a ton of other boot images since then, but none of them work. Did I just brick my phone?
This is the information displayed on the hboot screen:
*** UNLOCKED ***
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.12.0000
CPLD-NONE
MICROP-NONE
RADIO-NONE
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
MODEM PATH: OFF
cid: HTC__E11
Please help
the boot.img won't update the bootloader! only the firmware does....
I just wanted to say the same thing..you mixed boot.img and h-boot
boot.img is ROM-s specific kernel, H-boot is like "bios"
To upgrade h-boot you can:
1. Reverse your phone to full stock and do OTA update which automatically upgrade h-boot
2. Or flash manually firmware specific for you CID - you can find firmware collections here http://forum.xda-developers.com/showthread.php?t=1957376
Search on forum guide how to properly upgrade h-boot, but as i recall (http://forum.xda-developers.com/showthread.php?t=1953338&page=117) you need to relock bootloader, put phone in ruu mode, and flash firmware- more than one if necesary! BUT DO SEARCH PLEASE !!
And to boot to your old CM10 you need to flash boot.img from CM10 ROM zip file that you flashed before - not this one for CM10.1
Related
Hello everyone,
I am a newbie and I want to install the Android Revolotion HD 18.0 Rom on my HTC One X.
I tried before and almost got a bricked phone because of the wrong Hboot installation.
I re-flashed my old Hboot and after that my phone worked again, thank God!
So what do I have to do? I now now that I can't flash from Hboot 1.12.0000 directly to 1.36
I am currently on:
*Unlocked*
Endeavoru PVT Ship S-ON RL
Hboot - 1.12.0000
Microp - None
Radio - 2.1204.135.20
eMMC - bootmode: disabled
CPU - bootmode: disabled
HW Secure boot: OFF
Modem Path: OFF
June 28 2012 11:31.28
I have ROM Manager ClockworkMod Recovery 5.8.4.0 installed
1- you cannot reflash an old hboot with S-ON
2- while in fastboot usb mode : type this in cmd: fastboot oem readcid
then look in this thread for your cid and download the firmware aka hboot.
then you flash the rom from the recovery and dont forget the boot.img included in the zip(you have to flash it manually from fastboot, fastboot flash boot path.to...boot.img)
return to stock, get an OTA upgrade, unlock the phone
You CID is the most important information. Most of phone companies should have provided the JB update via OTA by now. To get it, you need to revert to stock and re-lock the phone. The upgrade process will then bump hboot to v1.36 or v1.39
If you don't have a nandroid backup of your original ROM or cannot find the exact RUU for your phone, check this thread: Return to stock without latest RUU
when done, relock the phone (
Code:
fastboot oem lock
)
Get the JB OTA update hopefully available (settings|about|software|check update). If not available, wait...
When done, unlock the phone again via htcdev (or if you still have the unlock_code.bin file, use command
Code:
fastboot flash unlocktoken Unlock_code.bin
Install Recovery and SU
You can now install JB custom ROM.
teamworkint said:
Hello everyone,
I am a newbie and I want to install the Android Revolotion HD 18.0 Rom on my HTC One X.
I tried before and almost got a bricked phone because of the wrong Hboot installation.
I re-flashed my old Hboot and after that my phone worked again, thank God!
So what do I have to do? I now now that I can't flash from Hboot 1.12.0000 directly to 1.36
I am currently on:
*Unlocked*
Endeavoru PVT Ship S-ON RL
Hboot - 1.12.0000
Microp - None
Radio - 2.1204.135.20
eMMC - bootmode: disabled
CPU - bootmode: disabled
HW Secure boot: OFF
Modem Path: OFF
June 28 2012 11:31.28
I have ROM Manager ClockworkMod Recovery 5.8.4.0 installed
Click to expand...
Click to collapse
hi there first here's all you need to know i think?
*** UNLOCKED ***
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.39.0000
CPLD-None
MICROP-None
RADIO-5.1204.163R.30
eMMC-bootmode: disabled
CPU-bootmode : disabled
HW secure boot: enabled
MODEM PATH : OFF
and........ version T-MOB005, main 3.16.110.4
++ i havent been able to find an RUU for this setup anywhere
i managed to flash cm10 and clockworkmod recovery touch but now i cant make it do anything
this i what i have done to try to resolve the problem without success
fastboot lock oem
[okay]
fastboot flash firmware
[okay]
fastboot flash unlocktoken Unlock_code.bin
[okay][/I]
i then go on to flash clockwork recovery and flash cyanogenmod+ su update to it but then it sticks in boot loop
i had a look at the files after mounting usb in clockwork but there is nothing there at all
unfortunately i didnt do a backup at all as i have modded a few phones in the past with success
i have no idea what is going on here as im no dev or writer
please help i dont have another phone at the moment and desperately need it as im a community first responder and rely on being able to call ambulance service
does anyone have any idea how to solve this problem????? [/I]
To be able to run CM10 on the JB hboots you need a modified boot.img
http://db.tt/uDdWaAtH
Flash this one and reboot
Hi, I got HOX with bootloop problem in my hand.
it just show HTC logo, vibrate and black screen. it goes over and over.
This is my device info
endeavoru xe ship S-off RL
CID-111111111
HBOOT-1.12.0000
CLPD-NONE
MICROP-NONE
RADIO-2.1204.135.20
eMMC Bootmode : disabled
CPU-bootmode : disabled
HW Secure boot : disabled
Modem parth : off
from what i've read, my device has SuperCID, so I can flash any firmware right ?
I've tried flashing with RUU :
RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_WWE_3.14.707.24_Radio_5.1204.162.29_release_296434_signed
it came back with error 159
RUU_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2_Radio_2.1204.135.20_release_274900_signed
flashing proccess finished, but still in bootloop
yes, i've relock the bootloader
I can enter the fastboot mode, but can not enter recovery mode.
So, any advice please ?
I dont' mind flashing it to custom, as long all the function are working well.
there are so many custom rom, I just confused which one to pick
Thank you
tianz said:
Hi, I got HOX with bootloop problem in my hand.
it just show HTC logo, vibrate and black screen. it goes over and over.
This is my device info
endeavoru xe ship S-off RL
CID-111111111
HBOOT-1.12.0000
CLPD-NONE
MICROP-NONE
RADIO-2.1204.135.20
eMMC Bootmode : disabled
CPU-bootmode : disabled
HW Secure boot : disabled
Modem parth : off
from what i've read, my device has SuperCID, so I can flash any firmware right ?
I've tried flashing with RUU :
RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_WWE_3.14.707.24_Radio_5.1204.162.29_release_296434_signed
it came back with error 159
RUU_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2_Radio_2.1204.135.20_release_274900_signed
flashing proccess finished, but still in bootloop
yes, i've relock the bootloader
I can enter the fastboot mode, but can not enter recovery mode.
So, any advice please ?
I dont' mind flashing it to custom, as long all the function are working well.
there are so many custom rom, I just confused which one to pick
Thank you
Click to expand...
Click to collapse
Try flashing a custom recovery, then restore ur nandroid backup or flash a custom rom...
Solved with CyanogenMod
Thank you
Hello guys.
I wanted to go from Cyanogenmod to Android Revolution, so I followed this guide: http://forum.xda-developers.com/showpost.php?p=32855238&postcount=29798
My cidnum is HTC__Y13, so I thought I was good to go.
I did the two first steps: Relock your device using fastboot: fastboot oem lock
Enter OEM flash mode using fastboot: fastboot oem rebootRUU
and it went fine, I got the black screen with the HTC logo..
But the firmware link was down, so I wanted to cancel and use JB FW toolkit instead.
I restarted the phone, but now it's stuck in HBOOT with the following text:
*** RELOCKED ***
*** Security Warning ***
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.39.0000
CPLD-None
MICROP-None
RADIO-5.1204.162.29
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
MODEM PATH: OFF
Dec 17 2012, 13:59:37
Everytime I turn off my phone and on again, it just starts up in HBOOT. I briefly see the HTC boot screen, with a red text saying something about a dev phone.
Anybody who can help me, so I can boot my phone up and put Android Revolution on the SD-card and get it up and running?
I managed to open it using the Unlock_code.bin!
Hi.
I need your help with my DHD.
Few months ago I flashed my DHD for the first time with JellyTime R11. I have some problems with it (GPS not working, random crashes/freezes), so I want to get back to stock rom.
Here is the problem. Every stock ROM (like this one: http://forum.xda-developers.com/showthread.php?t=1382235) I try to flash (through Clockwork Recovery, of course doing full wipe first) does not work. They just makes my phone stuck at black screen, just after HTC logo.
I even tried using few RUU for my phone, but they always returns error 140, or error 155.
I also tried using AAHK and AAHK2, but those don’t want to work with my sdcard (error: sdcard not mounted, but it clearly is mounted).
Could someone point me to what I should do next?
CID: HTC_032
Bootloader info:
*** UNLOCKED ***
ACE PVT SHIP S-ON RL
HBOOT-2.00.0029
MICROP-0438
RADIO-26.14.04.28_M
Flashing rom 101: for s-on bootloader, u need to flash the boot.img contained in the rom zip files using fastboot. Just extract the boot.img, put it into adb/fastboot folder, reboot device to fastboot, open cmd/terminal, type fastboot flash boot boot.img. Done.
Sent from my Desire HD using xda premium
That’s what I was missing. Works great.
Thank you.