Running carbon nightlies, I had 4g LTE on the 6/18 release but once updated to the newer nightlies all am seeing on the status bar is H DC and 3G... is it possible to go from 4g LTE radios to the one listed above on after flashing nightlies?
Sent from my SGH-T889 using xda app-developers app
I been experiencing the problem after flashing cm10. I set it too lte/gsm/wcmd at home my DC is on when I'm traveling around town I lose data and I had to turn on off data. I know I have lte in my city but it can't seem to connect to it. I have to switch to back to 4g only. Any fix for is issue?
Sent from my SGH-T889 using xda app-developers app
No problems here.
CARBON NIGHTLY | CABIN FEVER WHISKY
Fix it by changing to new lte apn
Sent from my SGH-T889 using xda app-developers app
culua said:
Fix it by changing to new lte apn
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Mine was acting up too. I was using PAC 22.1. I recently swapped to Rootbox 4.1 (ATT) but using same TMO modem. It seems to lock on to 3G/DC now, which I was new to. Before I would only see 3G/H+, now I mostly see 3G/DC and hardly ever see H+. However when I drive around to areas where I usually pick up LTE, it seems to stick on to 3G/DC. I'd have to fiddle with the APN settings (I have the old epc.tmobile.com and fast.t-mobile.com APN) even though I'm already using the fast.t-mobile.com one. Locking onto LTE became horrible. Before, it would auto lock instantly when I'd pass through the area, and now it's got connectivity issues.
Related
I am in a lte area and not getting lte coverage anyone else in bell with this problem? It just says H on the top, and cm10 rom
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Hi there, please go to bell.ca/support and search apn settings, you will probably need to add Bells LTE settings to your phone.
Sent from my SGH-I747M using xda app-developers app
tehsprayer said:
I am in a lte area and not getting lte coverage anyone else in bell with this problem? It just says H on the top, and cm10 rom
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Are you inside a building? Bell's LTE penetration is....enough said.
Did you get LTE with stock rom? If so it could be a setting in the rom somewhere. I also have troubles with LTE when in a building (if thats the case)
I've been outside a building and still don't get lte in the kitchener Guelph area where lte is supported I also changed the settings to gsm/lte but still never see 4G on the top
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
tehsprayer said:
I've been outside a building and still don't get lte in the kitchener Guelph area where lte is supported I also changed the settings to gsm/lte but still never see 4G on the top
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
I'm on Rogers in the mississauga / Toronto region and I have the same problem.
Setting gsm/auto/lte doesn't work
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Just got the confirmation yesterday that Bell have issue with their LTE network.
Go on your network setting and select WCDMA ONLY if you are able...
This is what the tech told me for my LG and since yesterday got 1 drop connection and not 10 a day!!!
tehsprayer said:
I am in a lte area and not getting lte coverage anyone else in bell with this problem? It just says H on the top, and cm10 rom
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
I'm on Virgin Mobile Canada (Bell) and was having issues getting 4G (LTE). I believe it was posted on the CM10 thread but I reposted this as someone else was asking the same thing, but if you can't get 4G working even with the correct APN, go to your dialer and dial *#*#4636#*#*
This will take you to the phone testing menu. Tap Phone information, scroll down to the selectable list which may say CDMA or GSM/CDMA. Change that to LTE/GSM or LTE/GSM/CDMA and that should get it working again.
This worked for me on CM10, but AOKP should be close enough that this may help you out.
I'm on Att but the 9-8 build of aokp defaults to wcdma preferred on boot up..I know I live in an LTE area so what I did was *#*#4636#*#* then choose LTE only to force it into LTE coverage after that choose LTE/GSM/CDMA prl auto then or LTE should stick..for me if I chose LTE/GSM/CDMA first it would still default to wcdma...hope this helps...keep in mind you have to perform this after every reboot until its changed by task if it ever is in future builds.
Sent from my SGH-I747 using XDA Premium HD app
djkinetic said:
I'm on Att but the 9-8 build of aokp defaults to wcdma preferred on boot up..I know I live in an LTE area so what I did was *#*#4636#*#* then choose LTE only to force it into LTE coverage after that choose LTE/GSM/CDMA prl auto then or LTE should stick..for me if I chose LTE/GSM/CDMA first it would still default to wcdma...hope this helps...keep in mind you have to perform this after every reboot until its changed by task if it ever is in future builds.
Sent from my SGH-I747 using XDA Premium HD app
Click to expand...
Click to collapse
Hmmm, that's interesting. On CM10, I don't need to change that on every reboot. Not even after a dirty flash. Just after a clean flash.
I had the same problem on rogers in Vancouver also running cm10 make sure you change your APN to the lte version also where it says APN type I put default. Another thing that may confuse you is that there is no lte icon on cm10 it says 4g instead
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
---------- Post added at 02:48 PM ---------- Previous post was at 02:46 PM ----------
Also what might help is don't keep to many APN stored delete all except the lte and the lte tethering one. My phone was also switching to the regular APN on booting it up
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
djchrissca said:
Just got the confirmation yesterday that Bell have issue with their LTE network.
Go on your network setting and select WCDMA ONLY if you are able...
This is what the tech told me for my LG and since yesterday got 1 drop connection and not 10 a day!!!
Click to expand...
Click to collapse
Where did you get this confirmation?
Not getting LTE? Check your APN Settings
Hi Guys, if you are having issues with your LTE, check your APN Settings here...http://forum.xda-developers.com/showthread.php?t=1434995
So I just got the S3 today and immediately got home and rooted and threw cm10 stable on it. Well its been stable minus the data issues in getting. Its switching between 3G and H+ until i try to use data it sticks to H+ but then doesn't work. Speed test times out and so does the play store. Then I have to keep retrying then finally it works? Its bugging me terribly as on the way hone when I was playing with it... none of these issues were present? Any ideas?
Sent from my SGH-T999
Sounds similar to my issues I'm unlocked and on straight talk the indicator always changes at first my speed test were less than 1 MBS down but one day I power cycled and removed my sim and I start getting 6+ MBS down idk its crazy what's your service provider?
Sent from my SGH-T999 using xda premium
Here are my speed test significant increase eh??
Sent from my SGH-T999 using xda premium
Picked it up at T-Mobile, figured im switching from sprint to them anyways might as well see what service is like in my area. Compared to sprint... which there is no comparison its quite sad really. But now its working fine.... until I toggle data then it takes a crap. :-/
Sent from my SGH-T999
the switching between 3g and h+ (4g) is to save on battery live. even a stock nexus 4 does the same thing. the 4g modems that can handle 42mbs can drain tha battery. ther are ways to force h+ but it will drain your batt. if you want to fix search in the cm roms or any aosp rom thread.
moxis said:
the switching between 3g and h+ (4g) is to save on battery live. even a stock nexus 4 does the same thing. the 4g modems that can handle 42mbs can drain tha battery. ther are ways to force h+ but it will drain your batt. if you want to fix search in the cm roms or any aosp rom thread.
Click to expand...
Click to collapse
Well I don't mind it switching... That's okay. But when I toggle data... To turn it off and then wanna use it again... It doesn't work right away.. It takes like some 10 minutes for the bars to turn to connected and then finally work.
Sent from my Galaxy Nexus
FWIW fixed it by adding a new APN.
Sent from my Galaxy Nexus
Wanna share the APN?
Sent from my SGH-T999 using xda premium
dscott973 said:
Wanna share the APN?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I want to be your hero lol
Add the following to APN:
Proxy: 216.155.165.050
Port: 8080
Good luck.
Click to expand...
Click to collapse
Sent from my Galaxy Nexus
I recently got a LTE sim card, and an LTE data plan with Fido. 4G worked for about 5 seconds (I even did a speed test) and then now it's permanently on H+.
APN is set to LTEmobile.APN but when I change to Network Mode LTE/GSM, my signal goes blank and stays like that until I go back to GSM/WCDMA, which doesn't make any sense.
I'm using Task's 10/28 Build, which is the only build that doesn't have black screen unlock.
I tried updating to his latest 4.2 but LTE still didn't work.
Any ideas on what is wrong?
Sepharite said:
I recently got a LTE sim card, and an LTE data plan with Fido. 4G worked for about 5 seconds (I even did a speed test) and then now it's permanently on H+.
APN is set to LTEmobile.APN but when I change to Network Mode LTE/GSM, my signal goes blank and stays like that until I go back to GSM/WCDMA, which doesn't make any sense.
I'm using Task's 10/28 Build, which is the only build that doesn't have black screen unlock.
I tried updating to his latest 4.2 but LTE still didn't work.
Any ideas on what is wrong?
Click to expand...
Click to collapse
Please invest $10 and get a LTE sim card from FIDO it will work with LTE sim card.
ysr84 said:
Please invest $10 and get a LTE sim card from FIDO it will work with LTE sim card.
Click to expand...
Click to collapse
did you not read what he said? He has an LTE sim card. To the OP try a google search and see if there are any different apn's. Its not rom related because task650 gets LTE speeds with his rom. Or if your phone is unlocked and you know someone else that has the same phone or LTE sim card pop it in and try it out
Sent from my SGH-I747M using xda premium
I'm suffering the same problem on rogers. Going to flash back to stock rooted to fix the problem, then try again. I'll do this tomorrow as its getting late.
Sent from my Nexus 7 using xda app-developers app
Download LTE on/off from the play store and switch to lte only, I'm on fido and I had the same problem
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
pjcordi said:
Download LTE on/off from the play store and switch to lte only, I'm on fido and I had the same problem
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Tried it but didn't connect to lte.
Sent from my Nexus 7 using xda app-developers app
Some ROMs have incorrect Fido/Rogers APN settings; I'd go over what's in the ltemobile.apn settings and compare it to a known good set (such as the ones in the stock ROM).
Soft bricked my phone by going back to rooted stock ROM through Odin. Guessing I should have formated system. Anyways fixed it up. Got lte working on rooted stock. Then when to miui no lte. Read that lte is a problem with many on this ROM so I lose. Hope I can get it working eventually when off stock.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
onei0077 said:
Soft bricked my phone by going back to rooted stock ROM through Odin. Guessing I should have formated system. Anyways fixed it up. Got lte working on rooted stock. Then when to miui no lte. Read that lte is a problem with many on this ROM so I lose. Hope I can get it working eventually when off stock.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Carriers use different labels for H+/LTE - ROMs differ in how they interpret the actual signal speed.
Some ROMs accurately reflect the network speed, some don't.
Some carriers promote/sell speeds that they cannot provide in every area.
There are many possible explanations as to why you are experiencing this.
You should provide your ROM, carrier, APN settings, network speedtest results, etc. for more in-depth answers.
I'm running CM 10 on my AT&T S3. I'm in an LTE area and have LTE coverage. I also would have strong HSPA coverage as well.
My issue is, when I'm on a call, I have no internet connection. There is no 4G/H/3G icon at all by the signal bars (which are full). And when I try to go to a page it says No connection.
Is this an issue with CM10? Anyway I can fix this? I can't seem to remember if the issue was present on stock.
Same here. It worked on stock att
Sent from my SAMSUNG-SGH-I747 using xda premium
paniro187 said:
Same here. It worked on stock att
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
yea i put 10.1 and i still have the issue.
Been getting slow speed on note 2. Usually on s2 I get up to 12megs down,. On note the best I've been able top get is 4. Speeds dogs increase when switching to newest modem. Anyone else? ?
Sent from my GT-N8013 using Tapatalk HD
Nobody ? Hopefully lte helps.....
Sent from my GT-N8013 using Tapatalk HD
TeamHackura said:
Been getting slow speed on note 2. Usually on s2 I get up to 12megs down,. On note the best I've been able top get is 4. Speeds dogs increase when switching to newest modem. Anyone else? ?
Sent from my GT-N8013 using Tapatalk HD
Click to expand...
Click to collapse
I get 14-22
LTE is not available in most of the country yet (TMO)
CARBON NIGHTLY | KROZ HUE THEME | CRACK FLASHER
Yeah I'm cool not having lte until it's released but how does my sgs2 get better speeds on t mobile?
Sent from my GT-N8013 using Tapatalk HD
Honestly I'm thinking some of the issues are the build.prop
Ive been adding a few things ril related
ro.ril.hsdpa.category=28
ro.ril.hsupa.category=9
ro.ril.hsxpa=5
ro.ril.gprsclass=12
And getting somewhat better performance though I'm not certain they are helping I don't have the energy to check if something else is setting them
Just add a new APN with epc.tmobile.com, the new APN (fast.t-mobile.com)on the 4.1.2 is the one making you get the slow speed.
Re: Bad data speeds (solved)
djsombra said:
Just add a new APN with epc.tmobile.com, the new APN (fast.t-mobile.com)on the 4.1.2 is the one making you get the slow speed.
Click to expand...
Click to collapse
I added epc.tmobile apn but phone defaults to lte one. How to make those settings stick? Anyone can help?
Edit:
Time to buy reading glasses. Comma and period look the same for me
Sent from my SGH-T889 using xda app-developers app
djsombra said:
Just add a new APN with epc.tmobile.com, the new APN (fast.t-mobile.com)on the 4.1.2 is the one making you get the slow speed.
Click to expand...
Click to collapse
the new APN is for the LTE network supposedly. Not sure if it will be only for LTE or if you'll be able to epc for LTE as well.
I'm in one of the LTE markets and keep flipping between stock and carbon rom. Tried cyanogen and have had the best luck.
I bought my note 2 at full retail for use on prepaid 70$ plan to see if I want to switch off my VZW unlimited data with 30$ hotspot.
I'm anxiously awaiting LTE turn up!
Sent from my GT-N7105 using Tapatalk 2
TeamHackura said:
Been getting slow speed on note 2. Usually on s2 I get up to 12megs down,. On note the best I've been able top get is 4. Speeds dogs increase when switching to newest modem. Anyone else? ?
Sent from my GT-N8013 using Tapatalk HD
Click to expand...
Click to collapse
Try this app and let me know if it works : Signal Repair (Root)
darekz said:
I added epc.tmobile apn but phone defaults to lte one. How to make those settings stick? Anyone can help?
Edit:
Time to buy reading glasses. Comma and period look the same for me
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
They cover how to make the APNs editable in these forums you'll have to search. I don't have the energy to look at the moment.
Edit:
Ended up finding a decent example of editing stock with new APN.
http://forum.xda-developers.com/showthread.php?p=33700969
Just be VERY VERY VERY careful and I'm not liable for any issues you run into.
Sent from my GT-N7105 using Tapatalk 2
I thing they are testing LTE under fast.t-mobile.com but if you live in a tmobile LTE area is no need to change to epc but if you see slow speed have the epc apn available to switch for faster HSPA+.
Sent from my SGH-T889 using xda app-developers app
Yeah I think they are using it to test also but that's a guess. I constantly switch between 3g and 4g icons all day. ... Like every ten seconds when in most areas. I'll leave apn until tomorrow and then switch to epc if I don't see lte. I live in Miami fl and have been checking downtown in hopes of getting lte
Sent from my SGH-T889 using Tapatalk 2
Looks like no Florida (or nyc for the matter) in initial lte roll out
Sent from my SGH-T889 using Tapatalk 2