Develop Bugs

Can someone with the ATT or ROGERS version please post a flashable radio

Its for ppl like me with the TMOB version unlocked, that want to try to get AT&T LTE .
HERE IT IS APPARANTLY - IT WAS SENT TO ME:
http://db.tt/5tGc6x61

i got a rogers note 2 but no root yet :crying:

turilo said:
i got a rogers note 2 but no root yet :crying:
Click to expand...
Click to collapse
me too, need a root guide

qqzzxx said:
me too, need a root guide
Click to expand...
Click to collapse
Thought maybe tmob root method would work but its using tmob stock recovery so doubt it
Sent from my SGH-I317M using Tapatalk 2

This was PMd to me, the AT&T radio flashable on ODIN, according to who sent it to me. I'm not in an LTE area currently so can someone who is try it on a TMOB to see if it works?
Sent from my SGH-T889 using xda app-developers app

ekerbuddyeker said:
This was PMd to me, the AT&T radio flashable on ODIN, according to who sent it to me. I'm not in an LTE area currently so can someone who is try it on a TMOB to see if it works?
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
I'll try it if you send it or link it.

I'll try it too
Sent from my SGH-T889 using xda app-developers app

Rooting is easy, be it Rogers or Bell. Theyre the same minus the bloatware.
Check the Q/A section, but in a jist, just flash the Note 2 N7105 CWM recovery file with Odin then in CWM flash SuperSU 0.97 and reboot.
Done. Remove carrier bloat and be happy. (You can also add the 4.2 keyboard and such. I also removed the Samsung SMS and Calc apks for AOSP ones as I hate Samsungs SMS and Calculator. If I could change the phone APK too I would, but i suspect its largely intertwined with Touchwiz.)

3_D said:
I'll try it if you send it or link it.
Click to expand...
Click to collapse
http://db.tt/5tGc6x61

didnt work this is what i got
06> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> modem.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> Transmission Complete..
<ID:0/006> Now Writing.. Please wait about 2 minutes
<ID:0/006>
<ID:0/006> Receive Response from boot-loader
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!

Thanks for trying
Sent from my SGH-T889 using xda app-developers app

Sent from my SGH-T889 using xda app-developers app

This file says it was added 7 weeks ago? How is this?

check this out replace web & 。
[web//forum。xda-developers。com/showthread.php?p=33977987#post33977987]

[Q] S3 gets removed 80% through ODIN flash

Im trying to unroot my phone and get it back to its stock form but when i try to flash the stock t-mobile t999 rom i either get stuck on "get pit for mapping" or ODIN gets to about 80% done flashing and then disconnects the phone then reconnects it
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T999UVALH2_T999TMBALH2_T999UVALH2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> aboot.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> boot.img
<ID:0/008> cache.img.ext4
<ID:0/008> NON-HLOS.bin
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
<ID:0/008> Added!!

What is your model phone? Look under battery to be certain.
Sent from my SGH-T999 using xda premium

DocHoliday77 said:
What is your model phone? Look under battery to be certain.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
sorry i didnt include that but my phone model is SGH T-999

Try using mobile Odin. There is a free version here on XDA. Just need to search for it
Sent from my SGH-T999 using xda premium

DocHoliday77 said:
Try using mobile Odin. There is a free version here on XDA. Just need to search for it
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Thanks for the suggestion ill try it out and report what happened

I think I had a similar problem. Try checking flash bootloader and make sure you've got the right files otherwise bye bye. If not I would suggest a different computer with drivers installed.
Sent from my SGH-T999 using Tapatalk 4 Beta

TheLastSidekick said:
I think I had a similar problem. Try checking flash bootloader and make sure you've got the right files otherwise bye bye. If not I would suggest a different computer with drivers installed.
Sent from my SGH-T999 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Do you know what the right files are? I've tried to figure that out before but no one can ever tell me exactly what should be flashed using the bootloader option in odin...
Sent from my SGH-T999 using xda premium

DocHoliday77 said:
Do you know what the right files are? I've tried to figure that out before but no one can ever tell me exactly what should be flashed using the bootloader option in odin...
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
No sorry bro. I do know for a fact that everything I needed for my T999 was in the root66 return to stock firmware thread. I'd try going back to the default firmware this phone shipped with for best luck though.
But to Op and anyone else stuck, if the bootloader won't flash then you've got a serious problem if it's already corrupted. My guess is its the OS and your drivers acting weird. Does it say USB Composite Device in Odin? Just a double check, but make sure the architecture of your OS (x86 or x64) matches the drivers you have installed. I'd recommend uninstalling the drivers then rebooting and reinstalling them once more and rebooting once more and it should work from there.
Sent from my Nexus 7 using Tapatalk 4 Beta

DocHoliday77 said:
Try using mobile Odin. There is a free version here on XDA. Just need to search for it
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
This or try flashing the firmware updates through recovery.

[Q] Stuck on Firmware upgrade encountered an issue. Please ... I tried Kies and Odin

Hey, just in case someone knew what to do ......
On the phone was MIUI v5 for Note II, everything worked as it should. One morning I woke up with message Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.
I can get into download mode, can not get into recovery mode.
Through the ODIN and then through Kies I flashed the stock ROM. Everything went ok without errors but still the same message Firmware upgrade .......
N7100 16GB ROM Poland (Plus)
Does anyone have advice?
PRODUCT NAME: GT-N7100
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom

Use pit file along with rom in odin.
Look my signature for all in one N7100, post #4 of that thread have pit.
If odin fails then post complete log here.
Sent from my GT-N7100 using xda premium

Many thanks for reply.
I tried with error
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007>
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)

It's bad sign anyway try with different PC and cable
Sent from my GT-N7100 using xda premium

4 different cables 2 PCs still doesn't work.....what about the battery? I will borrow few cables from my neighbour. I have 7600mAh one, but I dont't know current state. I think It will be under 30 pct. Should I with PIT add ROM(PDA) as well?

It shouldn't make difference whether flash single or with rom.
Though you can try.
Possibility is may be sds.
Edit : recovery mode is accessible?
Sent from my GT-N7100 using xda premium

No recovery mode is not accessible.

And I know I have eMMC "Insane Chip". VTU00M

Send it to service station chances are there it's sds.
Sent from my GT-N7100 using xda premium

Are you sure, SYSTEM STATUS: Custom is ok for warranty?

But many thanks anyway.

Yes whatever cases I have seen all have custom who had sds.
Sent from my GT-N7100 using xda premium

Sprint Samsung Galaxy Note II 4.3 OTA Update

Here's the link to the .zip file to all of you that want to manually update to Samsung Galaxy Note II to 4.3. Please post your "About Device" screenshot after completing the update and thanks.
https://www.dropbox.com/s/pnc6ofvuhlm9z25/USER_L900_SPT_MC2_to_MK4_Update_FWD.zip
Here's mine!!
Sent from my SPH-L900 using xda app-developers app

So this is a leak. And not the official OTA? The official build is PAMK4 and this one is PUBMK4
The rest is Deleted. Phone went nuts in pocket.

PUBMK4 or PAMK4 it's 4.3 Nonetheless! If it's not the official build we'll get it pushed to our phones later on anyways!
Sent from my SPH-L900 using xda app-developers app

Anyone else notice a longer delay when waking up your device after this update?...or is it just me?
Sent from my SPH-L900 using xda app-developers app

The Dropbox link has been disabled because of high traffic on their servers so here's a new link to Mediafire.
http://www.mediafire.com/?yxu7eu47h4dhaht
Enjoy!
Sent from my SPH-L900 using xda app-developers app

patrick_1 said:
Anyone else notice a longer delay when waking up your device after this update?...or is it just me?
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
I did it is definitely a fraction slower.

patrick_1 said:
Anyone else notice a longer delay when waking up your device after this update?...or is it just me?
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
I remember on 4.1.2 you needed to disable some s-voice options that created that delay...just a guess

Could it be updated for SM-N9005?
Sent from my Note 3 using Tapatalk

i just tried it.. and unless im missing something it didnt work. told me it couldnt verify esignature or something.. i dont need to be rooted for this do i?

thanks.....
butthe knbox is terrible...
Sent from my SPH-L900 using xda app-developers app

You have to be bone stock for this to work. To avoid any problems just flash a stock rooted or non rooted rom on the forums and then download the update file from your computer and not your phone. Put that update zip on external SD and power down to stock recovery and flash. Even the slightest mod can not allow you to update. I had a stock backup and I kept getting signature errors. I just found a bone stock ROM and flashed that and updated fine.
Sent from my SPH-L900 using XDA Premium 4 mobile app

bonebeatz1234 said:
You have to be bone stock for this to work. To avoid any problems just flash a stock rooted or non rooted rom on the forums and then download the update file from your computer and not your phone. Put that update zip on external SD and power down to stock recovery and flash. Even the slightest mod can not allow you to update. I had a stock backup and I kept getting signature errors. I just found a bone stock ROM and flashed that and updated fine.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Would you be willing to give a step by step on how to download and put 4.3 on phone, I've been waiting for this update and this is the closest website I have found on how to manually do it, but am terribly ignorant about how to do it.

rongd said:
thanks.....
butthe knbox is terrible...
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
what is knbox?

Stuck on Boot, unable to flash stock ROM
Hello,
I am inexperienced with manually updating the OTA file. My Sprint Note 2 was previously rooted but I removed the root using a stock firmware via ODIN 3.09. I downloaded this zip, unzipped it, and then tried using ODIN. In my inexperience, I used the PHONE (CP) tab and installed the sboot.bin file using ODIN 3.09 and now my phone is stuck on boot. I tried reflashing the ROM with a stock using the PDA (AP) option but I keep getting this error from ODIN:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_L900VPAMC2_L900SPTAMC2_1090526_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> recovery.img
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
KIES_HOME_L900VPAMC2_L900SPTAMC2_1090526_REV04_user_low_ship.tar.md5 came from SamMobile.
I tried using other versions of ODIN as well (3.07 mainly) but all of them gave me the same error message. My phone would tell me unsupported version.
Can anybody help me unbrick my phone?

If your not advanced wait for a ROM without knox bootloader . Knox is a pain if your a noob . check the forums it should be one up in a day or to
Sent from my SPH-L900 using XDA Premium 4 mobile app

QuantumInteger said:
Hello,
I am inexperienced with manually updating the OTA file. My Sprint Note 2 was previously rooted but I removed the root using a stock firmware via ODIN 3.09. I downloaded this zip, unzipped it, and then tried using ODIN. In my inexperience, I used the PHONE (CP) tab and installed the sboot.bin file using ODIN 3.09 and now my phone is stuck on boot. I tried reflashing the ROM with a stock using the PDA (AP) option but I keep getting this error from ODIN:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_L900VPAMC2_L900SPTAMC2_1090526_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> recovery.img
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
KIES_HOME_L900VPAMC2_L900SPTAMC2_1090526_REV04_user_low_ship.tar.md5 came from SamMobile.
I tried using other versions of ODIN as well (3.07 mainly) but all of them gave me the same error message. My phone would tell me unsupported version.
Can anybody help me unbrick my phone?
Click to expand...
Click to collapse
Follow the steps I have in this thread and all will be okay. http://forum.xda-developers.com/showthread.php?p=47766521
Sent from my SPH-L900 using XDA Premium 4 mobile app

jlmancuso said:
Follow the steps I have in this thread and all will be okay. http://forum.xda-developers.com/showthread.php?p=47766521
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm a little new to all of these. What did you mean when you said "twrp or cwmr with odin"?
EDIT: Nvm, I figured it out. I download a recovery img for the SPH-L900 from ClockworkMod Rom and converted to tar using a tool created by user cabloomi here on the XDA forum. I loaded it and now i'm waiting for the MC2 file to finish downloading.

jlmancuso said:
Follow the steps I have in this thread and all will be okay. http://forum.xda-developers.com/showthread.php?p=47766521
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Okay, I've ran into some issues. I downloaded the files that I was told to download. I used Caboomi's file to change the .img to .tar and flashed using ODIN. I assume that I'd have to go into Clockworkmod Recovery mode in order to flash the MC2 files. However, I can't get into Clockworkrecovery Mod. I tried holding the volume up, power button, and home button but it just shows me the Galaxy Note II splash screen.

FYI you can update through kies.
Sent from my SPH-L900 using xda app-developers app

HELP
I downloaded the USER_L900_SPT_MC2_to_MK4_Update. But how do you install it? I am a noob and am in need of help. Thanks

[Q] Odin not working Help needed

I have searched through the forum and have not been able to find anything that addresses my problem. I am having an issue when trying to use odin to go back to stock rom. Everytime I run it I get the following.
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SPH-L900_L900VPALJ1_L900VPALJ1_L900SPTALJ1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> param.bin
<ID:0/005> recovery.img
<ID:0/005> sboot.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have done this many times before but for some reason now I am getting this error. Any help would be greatly appreciated.

Have you been on 4.3 ?
If so, give the Odin One-Click a try from @rwilco12 found here http://forum.xda-developers.com/showthread.php?t=2591898 this is MK4 or you can try here @rwilco12 forum found here http://rwilco12.com/downloads.php?dir=Files/Devices/Samsung Galaxy Note II (SPH-L900)/Stock ROMs and pick and choose what version you want
I had similar issues when I tried to "downgrade" from 4.3 and this worked for me.
Hoping this might help for you too
Sent from my SPH-L900 using xda premium
Sent from my SPH-L900 using xda premium

Harjan112 said:
Have you been on 4.3 ?
If so, give the Odin One-Click a try from @rwilco12 found here http://forum.xda-developers.com/showthread.php?t=2591898 this is MK4 or you can try here @rwilco12 forum found here http://rwilco12.com/downloads.php?dir=Files/Devices/Samsung Galaxy Note II (SPH-L900)/Stock ROMs and pick and choose what version you want
I had similar issues when I tried to "downgrade" from 4.3 and this worked for me.
Hoping this might help for you too
Sent from my SPH-L900 using xda premium
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
No I am not on 4.3 I am on 4.1.3

Ok, even on 4.1.3 did you give that Odin one click a try? There are several versions there
Sent from my SPH-L900 using xda premium

Harjan112 said:
Ok, even on 4.1.3 did you give that Odin one click a try? There are several versions there
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
Thanks got it to work

Cool, glad I could guide you in the right direction
Don't forget to give @rwilco12 A BIGGG thanks
Sent from my SPH-L900 using xda premium