Hi, I've a problem with my Xperia Play, I tried to flash .42 FW over a custom rom, but I think I bricked it, because aftter flashing, the phone doesnt start up and a red light appears near the power button when I connect the phone at the computer (that happens also when I trying to power up the device). Also, when I connect the phone at my computer, it recognize as "Xperia Neo", instead of Xperia Play. Can someone help me, please ?
bogsplay said:
Hi, I've a problem with my Xperia Play, I tried to flash .42 FW over a custom rom, but I think I bricked it, because aftter flashing, the phone doesnt start up and a red light appears near the power button when I connect the phone at the computer (that happens also when I trying to power up the device). Also, when I connect the phone at my computer, it recognize as "Xperia Neo", instead of Xperia Play. Can someone help me, please ?
Click to expand...
Click to collapse
If u can go to flashmode and flash another firmware
Or if u have unlocked bootloader change ur kernel and install a custom rom
Sent from my R800i using xda premium
Related
Hello,
I'm using Arconium rom when i tryed to install the CM9 to test, well i just flashed with fastboot the new img from FX and install the rom. The instalation started but returned an error that i don't remember something about lt8i (my phone is lt5i).
I go to flashtool and tryed to get back to stock rom, but without sucess, now my phone show the Sony Ericsson logo and later it stay black.
Thinking i can fix this i relock the bootloader with flashtool files (found on Xperia Arc forum) and still not fix. Now i cannot unlock the bootloader "oem failed" and the phone doesnt start.
Please someone can help-me with a tutorial or something else ?
Take battery out, connect it to pc, press the back button and now plug in the battery again and see if it connects in flashmode then.
Sent from my iPad 2 using Tapatalk
Flo95 said:
Take battery out, connect it to pc, press the back button and now plug in the battery again and see if it connects in flashmode then.
Sent from my iPad 2 using Tapatalk
Click to expand...
Click to collapse
Yes, the phone conect on flashtool and fastboot normally, but only show the SE logo.
Update[/B
I tryed to flash a fresh rom with flashtool .42 but no success.
Fix finally
Hey, i finally fix the problem, i downloaded the stock .62 and flashed with flashtool and works.
HELP
THIS MAY HELP U
http://forum.xda-developers.com/showthread.php?t=1322827
Hi everyone.
This is my problem:
I recently updated my arc s, from.42 to .62(idiot) and after that the phone wont switch on, when I try to switch it on it only shows a green blink from side and that is it.
I have tried to flash it with generic rom, with SEUS update, nothing works, it just says flashing complete turn on the phone but I CAN NOT DO THAT!!!
When I connect it with the computer it is in flash mode (SEMC Flash Drive), bootloader is locked!!!
What can I do???:crying::crying::crying:
ivko1982 said:
Hi everyone.
This is my problem:
I recently updated my arc s, from.42 to .62(idiot) and after that the phone wont switch on, when I try to switch it on it only shows a green blink from side and that is it.
I have tried to flash it with generic rom, with SEUS update, nothing works, it just says flashing complete turn on the phone but I CAN NOT DO THAT!!!
When I connect it with the computer it is in flash mode (SEMC Flash Drive), bootloader is locked!!!
What can I do???:crying::crying::crying:
Click to expand...
Click to collapse
Try SEUS again. That will be your best option.
Go to a Sony Support Center?
Try it again, if it fails try flashtool. If that fails contact Sony
Sent from my LT18i using xda app-developers app
Hi, i was installed stock android ics for xperia arc s via flashtool, it was complete, so i plug of my xperia and its not working, no light, no logo, no vibration, flashtool, sony update and rest dont recognize it, computer not recognize any device, when i plug in its no happend what i have to do?
sorry for my eng.
Thanks..
edit:
i connect xperia to pc without battery, and its recognize qhsusb_dload
borkusborek said:
Hi, i was installed stock android ics for xperia arc s via flashtool, it was complete, so i plug of my xperia and its not working, no light, no logo, no vibration, flashtool, sony update and rest dont recognize it, computer not recognize any device, when i plug in its no happend what i have to do?
sorry for my eng.
Thanks..
edit:
i connect xperia to pc without battery, and its recognize qhsusb_dload
Click to expand...
Click to collapse
Did you try to connect you phone in fastboot mode?
僕のLT18iから送られてきた
xperia arc
Hello! I have the same problem with my XPERIA ARC that will not turn on, no led, no vibration ... (completely dead) and it has detected to the computer'' qhsusb_dload''. I flashed it with flashtool.
how can I fix it. thank you to answer us.
chippeur said:
Hello! I have the same problem with my XPERIA ARC that will not turn on, no led, no vibration ... (completely dead) and it has detected to the computer'' qhsusb_dload''. I flashed it with flashtool.
how can I fix it. thank you to answer us.
Click to expand...
Click to collapse
try connect phone without battery 1st to flash mode, than to fastboot mode if both not work its dead. (i guess ur tried sony pc companion allready)
bejunk said:
try connect phone without battery 1st to flash mode, than to fastboot mode if both not work its dead. (i guess ur tried sony pc companion allready)
Click to expand...
Click to collapse
two ways dont work.......
how to go fastboot mode plz tell. or how to flash fastboot mode
shaheb2007 said:
how to go fastboot mode plz tell. or how to flash fastboot mode
Click to expand...
Click to collapse
Search is for dummy ?
Turn-off phone, then press and hold "Menu" button. Connect phone to computer. The LED will turn to blue color. Now, it is in fastboot mode.
u can try take out battery 10 mins then flash rom stock again by flashtool ,if cant work and dont vibaration ,maybe ur phone die...
There IS a solution
If nothing works search for " OTA ROOT FLASH FIX Xperia ARC " try tut from that topic.
i just installed a cwm recovery with a locked bootloader. After i installed it i installed a rom eXistenZ. No it won't start anymore i can't see anything on the screen. even the sony logo. Only thing i see sometimes is a green led that's it. I need help please!!! I can't even charge it. There is no red led.
bokilz said:
i just installed a cwm recovery with a locked bootloader. After i installed it i installed a rom eXistenZ. No it won't start anymore i can't see anything on the screen. even the sony logo. Only thing i see sometimes is a green led that's it. I need help please!!! I can't even charge it. There is no red led.
Click to expand...
Click to collapse
can't even get my phone working on flashtool. i tried to flash it with flashtool but the pc won't recognize that my phone is connected with usb.
bokilz said:
can't even get my phone working on flashtool. i tried to flash it with flashtool but the pc won't recognize that my phone is connected with usb.
Click to expand...
Click to collapse
I'm probably not the best person to help with unbricking but have you tried following the unbricking guide here: http://forum.xda-developers.com/showthread.php?t=1849170 ?
Assuming your PC has the correct drivers installed (i.e. you could previously connect your phone in flashmode), what happens when you try connecting the phone while holding the Volume Down key? Does the LED light up green, red or not at all?
Fix is simple ...
1 Install flashtool drivers
2 the problem from the kernel !!
Install stock kernel ( take it from FTF ) and install it via Flashtool ...
Now it should be fixed
Sent from my LT26w using Tapatalk
Well this is is What happened. I was trying to install "ICS Neo2Play V2.7" on my "Sony Ericsson Xperia PLAY" I tried it twice and I couldn't so I flashed it again to R800a North America. As I couldn't do it I upgraded the "Flashtool! from 0.6.9.1 to 0.9.18.5 and tried to install "Lupus-v12-iCs-720" but I couldn't so I tried to install "ICS Neo2Play V2.7" and nothing so I plug it to flash it again and the Rom R800a wasn't there I didn't notice it and clicked flash so it did it fast and now I have a dead pone, it doesn't enter Flashmode doesn't turn on nothing but when I conect it to the PC the sound plays but that's it. It also doesn't turn on and the LED doesn't blink. HELP....!!! PLEASE.........!!! is there any way to fix it.....???
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck
If u flashed x10 relock file, u probably damaged bootloader partition and i dont think u can reapir it in home, without flasmode, coz only thing i can think of (not counting using box) is to flash relock file for 2011 xperias
Sent using C6833 - AICP/GreatDevs
I messed up my xperia ion in a similiar way. Take out the battery for a few minutes. With the battery out hook it up to the pc. If you can see a dim charging light of any colour your should be able to fix it. Unplug the phone and put the battery in. Without trying to power it on click the back button and connect it to the pc. This may work.
Sent from my LT28i using XDA Free mobile app