Hi, I'm trying to install cm10.1-RC5 from Arch Linux. I've wiped and factory reset and flashed the boot.img. I don't have s-off.
When I try to install the .zip in ClockworkMod 5.8.4.0 I get errors indicating that my bootloader isn't a compatible version. For example:
assert failed: getprop("ro.bootloader") == "1.31.0000"
E:Error in /sdcard/cm-10.1.0-RC5-endeavoru.zip
(Status 7)
Installation aborted.
I gather that this means my hboot or firmware needs an update. I've found this thread which seems relevant:
http://forum.xda-developers.com/showthread.php?t=2241419
I ran "fastboot oem readcid" and got this:
...
(bootloader) DEBUG: cid: VODAP021
OKAY [ 4.075s]
finished. total time: 4.075s
So I guess this means I need Vodaphone specific firmware? Where can I access this?
Or am I on the wrong track?
Post the result of fastboot getvar version-main..
This is a cmd fastboot command (windows)... No idea what's the command for Linux.. Might be something similar..
This way we can make sure which firmware you have...
-Sent from my IceCold One X!
vin4yak said:
Post the result of fastboot getvar version-main..
This is a cmd fastboot command (windows)... No idea what's the command for Linux.. Might be something similar..
This way we can make sure which firmware you have...
-Sent from my IceCold One X!
Click to expand...
Click to collapse
Thanks for the quick reply, here's the output:
version-main: 1.29.862.11
finished. total time: 4.069s
I've located this thread:
http://forum.xda-developers.com/showthread.php?t=1957376&highlight=upgrade+firmware+linux
This pointed me to .zip containing hboot 1.36.
I tried following these instructions:
http://sadevil.org/blog/2012/12/23/manually-flashing-an-ota-update/
Unfortunately the directories the tutorial references are different to the one in my .zip.
Now there are 2 ways you can upgrade your device's hboot
1: Returning to stock with a ruu and then updating to jellybean hboot with ota update.
2. Flashing the firmware zip and then installing a custom rom.
For running a ruu you will need access to a windows pc since it's an exe file : http://bugsylawson.com/files/file/1...11-radio-1120410514-release-260561-signedexe/
If you want to upgrade your firmware by flashing... Here's the firmware upgrade for your cid : http://goo.gl/yAa0G
Download the firmware and rename it to firmware.zip and then put it in the fastboot folder..
Steps:
1. Relock bootloader : fastboot oem lock
2. Reboot to ruu : fastboot oem rebootRUU
It will take you to a black htc screen... Wait for a few seconds for the screen to settle down and then flash the firmware :
Fastboot flash zip firmware.zip
You might need to flash the firmware twice if you get an error the first time! Its quite normal! After successfully flashing the firmware, you need to unlock the Bootloader, flash a custom recovery and then flash the custom rom!
PS: Again, the commands are for fastboot cmd (windows).. Linux might be a little different..
-Sent from my IceCold One X!
vin4yak said:
Now there are 2 ways you can upgrade your device's hboot
1: Returning to stock with a ruu and then updating to jellybean hboot with ota update.
2. Flashing the firmware zip and then installing a custom rom.
For running a ruu you will need access to a windows pc since it's an exe file : http://bugsylawson.com/files/file/1...11-radio-1120410514-release-260561-signedexe/
If you want to upgrade your firmware by flashing... Here's the firmware upgrade for your cid : http://goo.gl/yAa0G
Download the firmware and rename it to firmware.zip and then put it in the fastboot folder..
Steps:
1. Relock bootloader : fastboot oem lock
2. Reboot to ruu : fastboot oem rebootRUU
It will take you to a black htc screen... Wait for a few seconds for the screen to settle down and then flash the firmware :
Fastboot flash zip firmware.zip
You might need to flash the firmware twice if you get an error the first time! Its quite normal! After successfully flashing the firmware, you need to unlock the Bootloader, flash a custom recovery and then flash the custom rom!
PS: Again, the commands are for fastboot cmd (windows).. Linux might be a little different..
-Sent from my IceCold One X!
Click to expand...
Click to collapse
Golden gold you are sir/madam! Got CM10.1 running like a beast!
Thankyou kindly.
That's Great! Enjoy cm10! :good:
-Sent from my IceCold One X!
firmware for htc_38 for hboot update
I have HTC One X, currently i m at hboot 1.72 and CWR 6.0.4.7. I want to update my hboot for that i need firmware for my device whose CID is htc_38. I have already gone through xda page of "collection of firmware" to search for my device's firmware but i didnt get it there. plzzzzzzz help me out here.
abhinav625 said:
I have HTC One X, currently i m at hboot 1.72 and CWR 6.0.4.7. I want to update my hboot for that i need firmware for my device whose CID is htc_38. I have already gone through xda page of "collection of firmware" to search for my device's firmware but i didnt get it there. plzzzzzzz help me out here.
Click to expand...
Click to collapse
You are with the latest firmware!!!!
Related
Hello!
My problem is thet my htc one x is not go over the bootscreen.
I know this is a boot loop problem and 1 try to fix it but i cant,
when i try to install the update.zip the telephone write that
( error in sdcard/update.zip
status 7)
install aborted.
I try everything but...
please help!
what
What rom were you flashing, or what were you flashing?
breakerh said:
What rom were you flashing, or what were you flashing?
Click to expand...
Click to collapse
I have an original 4.0.3 and i root it.
when the 4.1.1 update come i try to update it, but it not worked.
When the phone download the original 4.1.1 update reboot and start again and not do anithing.
My first idea is if i close the bootloader it solve the problem and i csan update.
But it not worked so 1 download a custom rom witch has 4.1.1 [09.12.12] Orio 6.0.1 - ✪ Choose your Icons ✪ | 4.2 Camera | TW | Sense 4+ | JB | .27.
i download it from this forum.
when i flash this rom and have the first reboot the phone get into the boot loop and stuck since.
i try other roms but nothing change.
i try ruu envedor installer too it sas error 155
i try to erase cash from fastboot but nothing.
Tell us the results of:
fastboot oem readcid
And
fastboot getvar version-main
And your hboot version.
Update Hboot
I am 99% sure ur on hboot 1,12 or lower.
Update that first!
BenPope said:
Tell us the results of:
fastboot oem readcid
And
fastboot getvar version-main
And your hboot version.
Click to expand...
Click to collapse
infodebug cid: HTC_032
okay
getvar version: 2.17.401.2
hboot version: 1.12.0000
Try this
rastasamurai said:
infodebug cid: HTC_032
okay
getvar version: 2.17.401.2
hboot version: 1.12.0000
Click to expand...
Click to collapse
Download the boot.img and recovery.img for the OTA 2.17.401.2
then flash boot,system.img images and the lock the oem. now try to update the device software.
these steps will work only when you haven't changed any thing in system(Files).
if this fails follows the steps below.
Download the RUU 2.17.401.2 you can find here
then run the RUU, don't close it.
open run(windows specfic) and type %temp% and find the rom.zip in those directors.
extract the boot.img and system.img from that rom.zip. and flash them.
now lock the oem.
then continue the installation of RUU.
watch out
msaipraneeth said:
Download the RUU 2.17.401.2 you can find dl link
then run the RUU, don't close it.
open run(windows specfic) and type %temp% and find the rom.zip in those directors.
extract the boot.img and system.img from that rom.zip. and flash them.
now lock the oem.
then continue the installation of RUU.
Click to expand...
Click to collapse
Indeed, and make sure you have atleast 30%, i recommend just the full 100% haha.
Had the same problem was on hboot 0.95 :$
Tried to update.. fail..
tried to update hboot. battery low, and allready had it re locked.
So double check!
Hi guys
I want to update my hboot in order to install Jb roms. My current rom is a costum one.
My hboot is: 0.43
my build number ( I got this in menu>settings>about) : 2.17.401.2
And in fast boot when I run ''fastboot getvar version-main" I get this: 1.26.206.2
I have downloaded this RUU: RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.27_Radio_5.1204.162.29_release_298897_signed
I do this things:
Install a stock recovery
relock phone
Run RUU and extract rom.zip from temp but I can't extract it completely and I get the corrupted error ( In order to get recovery, boot.img and system files)
I continue the installing RUU process and i get [132] error, "update signature failed"
I don't know what eles should I do
Can anyone help please?
majidadib said:
Hi guys
I want to update my hboot in order to install Jb roms. My current rom is a costum one.
My hboot is: 0.43
my build number ( I got this in menu>settings>about) : 2.17.401.2
And in fast boot when I run ''fastboot getvar version-main" I get this: 1.26.206.2
I have downloaded this RUU: RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.27_Radio_5.1204.162.29_release_298897_signed
I do this things:
Install a stock recovery
relock phone
Run RUU and extract rom.zip from temp but I can't extract it completely and I get the corrupted error ( In order to get recovery, boot.img and system files)
I continue the installing RUU process and i get [132] error, "update signature failed"
I don't know what eles should I do
Can anyone help please?
Click to expand...
Click to collapse
that is because thats the wrong RUU for your phone you need the O2 2.17.206.xx RUU first then you should be able to install jelly bean from there. i hope this helps
Download this RUU
http://www.htcruu.com/securekey.php..._Radio_1.1204.90.13_release_251230_signed.exe
Now put the phone in the bootloader / fastboot usb mode and lock your bootloader ( if it is not locked)
Fastboot oem lock
After this you keep the phone in the bootloader / fastboot usb mode and right click the RUU.EXE file on the pc and select
RUN WITH ADMINISTRATOR RIGHTS (or the similar command )
Reboot the phone and start updating by checking for updates in settings - software
I have a HTC One X which has a T-Mobile firmware, CID: T-MOB005. Several months ago it was not possible to flash this device, has this now changed?
yeah it has....i've got the same CID and the JB firmware has been released
Can you point me i the direction of the right tutorial?
Do I need to S-OFF or change me CID for custom roms?
S-off is not needed, its as we speak even impossible to obtain .....
But you can go here for your firmware
http://forum.xda-developers.com/showthread.php?t=1957376
Read it carefully !
afford ganisava
I found the right firmware, but can't find the instructions.
Rename the .zip to firmware.zip and place it in the fastboot folder
- Boot the phone to the bootloader and relock the bootloader :
Fastboot oem lock
- then put the phone in ruu mode with this command
Fastboot oem rebootRUU
(watch the capitals, this command will put the phone into a black screen with a silver HTC logo)
- then flash the firmware
Fastboot flash zip firmware.zip
- you see the text on the pc screen, when it says OKE you are good. If it failed you reflash the zip right away again.
Then reboot the bootloader, unlock it, flash the custom recovery, make a full wipe and install the new JB of ypur choice and don't forget to flash its boot.img too
Hi all
I have the HTC ONE X International TEGRA 3 version.
Could do with some help.
I've updated HBOOT to 1.28 and when i try to install aokp_ICJ422-V2.9.5.zip in recovery this is what i get:
updating partition details...
installing '/sdcard/0/roms/aokp_ICJ422-V2.9.5.zip'...
checking for md5 file...
skipping md5 check: no md5 file found.
assert failed: getprop("ro.bootloader") == "1.28.0000" ||
E:error in 'sdcard/0/roms/aokp_ICJ422-V2.9.5.zip'
updating partition details...
Then it says Failed underneath
This is using Team Win Recovery Project v2.4.1.0
Any help is appreciated
AFAIK it should work on 1.28 hboot but it seems that LorD made a slight mistake while writing the updater script...
Is there any way you could update the hboot even further?
Sent from my IceCold One X
TToivanen said:
AFAIK it should work on 1.28 hboot but it seems that LorD made a slight mistake while writing the updater script...
Is there any way you could update the hboot even further?
Sent from my IceCold One X
Click to expand...
Click to collapse
I dont think i can as it was what was on the htc dev website and i just use the identifier token thats shown in cmd prompt
Ahem, hboot version has nothing to do with either htcdev or identifier token.
Please do:
fastboot oem readcid
And post the result here.
Sent from my IceCold One X
TToivanen said:
Ahem, hboot version has nothing to do with either htcdev or identifier token.
Please do:
fastboot oem readcid
And post the result here.
Sent from my IceCold One X
Click to expand...
Click to collapse
INFODEBUG: cid: HTC__001
You can go up to 1.39. Please stand by for instructions.
Download this: http://goo.gl/M0hLq
Rename it "firmware" if it isn't already named so. Copy it to the fastboot folder.
Put your Unlock_code.bin to your fastboot folder (search email inbox if you've lost it)
Then do the commands one by one:
fastboot oem lock
fastboot oem rebootRUU
fastboot flash zip firmware.zip (do several times if it fails)
fastboot flash unlocktoken Unlock_code.bin
Then flash the recovery of your choice and proceed.
jaymz_uk said:
INFODEBUG: cid: HTC__001
Click to expand...
Click to collapse
just checked in recovery and it still says HBOOT-1.12.0000 even though ive done " fastboot flash unlocktoken Unlock_code.bin
So as it stands i have bootloader and recovery but no OS.
Thanks for the help usually i can install rom's fine as i was using the 4.2.1 AOKP rom
Ive done what you said hboot is still 1.12.0000
firmware.zip keeps saying failed remote not allowed and remote 000000008.
still failing on writing zip
TToivanen said:
You can go up to 1.39. Please stand by for instructions.
Download this: http://goo.gl/M0hLq
Rename it "firmware" if it isn't already named so. Copy it to the fastboot folder.
Put your Unlock_code.bin to your fastboot folder (search email inbox if you've lost it)
Then do the commands one by one:
fastboot oem lock
fastboot oem rebootRUU
fastboot flash zip firmware.zip (do several times if it fails)
fastboot flash unlocktoken Unlock_code.bin
Then flash the recovery of your choice and proceed.
Click to expand...
Click to collapse
Will it write the zip file if its relocked?
jaymz_uk said:
Will it write the zip file if its relocked?
Click to expand...
Click to collapse
Still not working can someone help me get this sorted as i need my phone.
jaymz_uk said:
Will it write the zip file if its relocked?
Click to expand...
Click to collapse
It MUST be relocked in order to flash.
Sent from my IceCold One X
TToivanen said:
It MUST be relocked in order to flash.
Sent from my IceCold One X
Click to expand...
Click to collapse
well it keeps saying failed when trying to write. Should i just keep trying it?
jaymz_uk said:
well it keeps saying failed when trying to write. Should i just keep trying it?
Click to expand...
Click to collapse
It should flash fine after 2-3 tries.
Sent from my IceCold One X
TToivanen said:
It should flash fine after 2-3 tries.
Sent from my IceCold One X
Click to expand...
Click to collapse
for some reason it keeps saying failed when writing and then it just says waiting for device for ages
Does it have to be s-off as mines s-on
jaymz_uk said:
for some reason it keeps saying failed when writing and then it just says waiting for device for ages
Does it have to be s-off as mines s-on
Click to expand...
Click to collapse
Also rebooting the RUU is it supposed to show the word htc then go to something or do i reboot
jaymz_uk said:
Also rebooting the RUU is it supposed to show the word htc then go to something or do i reboot
Click to expand...
Click to collapse
Ok it worked turned phone off waited a couple of minutes then tried it all again and it worked. Just got to try the rom now will post back if all worked.
Thanks
All sorted and working just got to set it up. your a life save thanks for the help.
Great! Enjoy that masterpiece of a ROM.
Sent from my IceCold One X
hello,
i currently have installed slimbean 3.1.0 (4.1.2) on my hox
now i want to upgrade to 4.2.2 (http://forum.xda-developers.com/show....php?t=2172020) but when i flash the rom i alway get an error.
assert failed : getprop("ro.bootloader") Status 7 and something with hboot.
my hboot version is 1.12 and my cid is HTC__102
how can i fix this error?
thanks in advance,
Update the hboot first
What comes out :
Fastboot getvar version-main
Mr Hofs said:
Update the hboot first
What comes out :
Fastboot getvar version-main
Click to expand...
Click to collapse
when i run the command i get the following: version-main: 2.17.401.2
can i use method 3 from this tutorial? http://forum.xda-developers.com/showthread.php?t=1660807
where can i download the right files? i'm from europe/austria.
the last thing: "Run the RUU exe file (of your CID) in fastboot mode"
does this mean i need to open the exe when my phone is connected in fastboot usb?
thanks in advance,
BigAndroidFan said:
when i run the command i get the following: version-main: 2.17.401.2
can i use method 3 from this tutorial? http://forum.xda-developers.com/showthread.php?t=1660807
where can i download the right files? i'm from europe/austria.
the last thing: "Run the RUU exe file (of your CID) in fastboot mode"
does this mean i need to open the exe when my phone is connected in fastboot usb?
thanks in advance,
Click to expand...
Click to collapse
Download this RUU :http://bugsylawson.com/files/file/1...12-radio-2120413520-release-274900-signedexe/
Lock your bootloader using following command:
Code:
fastboot oem lock
Then run the ruu with admin privileges. It will take your phone to full stock! Then you can update OTA via Software Updates to the latest firmware and then you can flash any 4.2.2 roms out here!
vin4yak said:
Download this RUU
Lock your bootloader using following command:
Code:
fastboot oem lock
Then run the ruu with admin privileges. It will take your phone to full stock! Then you can update OTA via Software Updates to the latest firmware and then you can flash any 4.2.2 roms out here!
Click to expand...
Click to collapse
and i dont need to extract and flash the boot.img and signed_recovery.img from the exe before i lock the bootloader?
Nope
thanks guys, it worked!
Great!! Enjoy JB!
Case closed ! :d