[Q] dropped my phone - Galaxy Ace II Q&A, Help & Troubleshooting

hello, i dropped my Phone yesterday, after the drop i tried to turn it on but nothing
after some trials and error's i manage to turn the Phone on but now its stuck at the bootscreen.
tried factory reset but i cant enter recovery mode (already tried CWM)
the only mode i can get this Phone in is download mode
i hope u guys have some idea's for me
sorry for the bad english

If you can enter to download mode try flashing new firmware

and after you do that go there-> http://forum.xda-developers.com/announcement.php?a=81 and never make another thread with questioning things, use the already existing thread.

Related

boot loop no safe mode

Hi
im really hoping someone could help....
my phone decided to yet again throw another tantrum and crashed out, i first of all lost bluetooth like last time, and it kept hanging.
I restored the rom but no avail.
Stupidly i decided to wipe everything in clockwork mod and now the phone just shows up the android splash screen flashes and then shines again.
ive tried going into safe mode (vol - and power) but the phone fails to launch it. all it does is vibrate then continue onto the android screen
am i up the creek?
thanks for your help
http://forum.xda-developers.com/showthread.php?t=1104185
try the suggestions in this thread?
(simple search brought this up)
I'm curious, did you full wipe and then try to reboot without first flashing a rom? I've always wondered what would happen if you did that, not keen to try it myself

Telus s2x wont enter download mode, or boot, or cwm

I FOLLOWED ALL TUTORIALS BUT I AM STILL STUCK, PLEASE I NEED SOME HELP
So here is the story:
I had Jedi Mind Trick X, but i wanted to upgrade to CM10, and they said that the best was to get CWM Recovery 6, so i open up the ROM Manager app, and clicked on Flash CWM, everything was working fine untill the app asked for root rights, i granted it and then the app frozze. So i tried it again, and same results. So i figured out i had to see if it has updated (the cwm recovery), so i enter recovery mode, and then i can see there that it was updated (this i think, was the bad choice).
And so i start the process of flashing CM10 following the instructions, i already had a nandroid backup so i skipped that step and go right into the wipe data / factory reset. When i was on that screen the app froze, after waiting for a while that it was still froze, i shut down my device and started up again. Of course the phone didnt boot.
So at this point i had a phone that didnt boot, and a recovery that wasnt full installed (so it didnt work either). So i thinked ODIN might be the solution.
i flashed trought odin CWM 5 again and Telus stock ROM.
BUT now, the phone wont enter download mode (shuts downs), and it wont boot either. Althought, the phone DID boot once so i was happy, but it didnt work, the phone shut down by himself.
So now i cant enter recovery mode, download mode, neither boot. every time it enters a mode, it shuts down. so i need gelp
Im thinking of attaching a video of my situation.
Im sory for my english, im from Argentina.
Thanks in advance.
im starting to think tha might be a hardware problem of the power button

[Q] HELP!!!! Phone wont boot

I just tried to load a new rom on to my phone. I used twrp to do a factory reset and now it wont turn on, at all. I wont even get to the splash screen. I've tried removing the battery and then turning on, no luck. I've also tried holding the keys to get into recovery mode, nothing works!!
Please tell me its not a brick!
which rom where you running
which rom are you trying to load
kingskater said:
I just tried to load a new rom on to my phone. I used twrp to do a factory reset and now it wont turn on, at all. I wont even get to the splash screen. I've tried removing the battery and then turning on, no luck. I've also tried holding the keys to get into recovery mode, nothing works!!
Please tell me its not a brick!
Click to expand...
Click to collapse
It really helps to know what ROM you were flashing, what method you used to flash, i/e ODIN flash then TWRP wipe, or TWRP zip install and wipe.
I would highly bet that you flashed an incompatible ROM, that was meant for another version of the S III, which would cause you to be in this current state. Which best case scenario you take it back to AT&T and tell them you were in the middle of using KIES to upgrade to the new OFFICIAL Jellybean, and your computer froze during the install, after which your phone never turned back on.
Second case scenario, you call up Samsung and get an RMA from them, wait 2-4 weeks and get your phone back, often times not having to pay the "fee" for repairing it.
Worst case scenario, you have a nice shiny new beer coaster. In which case you could mail to me and I could use it as such, as I am currently out of coasters.
Try using Odin to fix
1. Download Odin and stock ROM rooted
2. Put phone in Download mode (not recovery) by pressing and holding Vol Down + Home + Power
3. Open Odin on computer and load the ROM
4. Hit Start
Refer to the following thread for a more in-depth guide:
http://forum.xda-developers.com/showthread.php?t=1739426
I got it fixed. I had to pay some kid to JTAG repair it.

[Q] Help - There is something wrong with my Phone!

Hi XDA Forums,
I have a problem with my Note 2 for some reason.
Let me explain you what is wrong with my Note 2
I was sitting down and watching a movie, my phone was right next to me, The phone randomly turned off and after couple of second it had turned back on. It had showed the first every screen when you turn it on "Samsung Galaxy Note 2 N7100". Now from there it keeps on looping the same screen over and over again.
I had done some research before opening this thread, I saw that some people said I should try factory resetting it from the recovery mode, I then tried going on the recovery mode, it was not successful, it had showed me the same "Samsung Galaxy Note 2 N7100" screen and then repeated to boot loop it self again, I tried going on the recovery a couple of times but it didn't let me go on it.
Next I had then downloaded the 4.1.2 Official Firmware from SamMobile to flash it to stock again, I had then tried going on the Download Mode, It goes to the screen for Download Mode, but when I try pressing up to continue from the warning message it had then rebooted it itself and made it self stuck on the screen again.
Basically, my phone is stuck on boot loop, It does not let me access the recovery mode and it also does not let me access download mode.
ROM Using: Tigra_RomV3 4.3 Based ROM
Kernel Used: The Kernel which comes with the ROM or Stock, I didn't change the kernel myself.
If there is a internal problem does that mean I wont get help from the Warranty because the phone was rooted?
hello,
just try to use the jig, it should work...
use it so your phone will be in download mode, then flash your rom
Do you NANDROID backup? Maybe you may restore it by custom recovery.
Second, remove the battery first for a while and retry to access the RECOVERY and DOWNLOAD mode. If not, try the suggestion up there.

How to fix blocked boot recovery samsung?

Hello guys,
A few months ago, I rooted my phone using kingroot. After a few weeks, i tried to install TWRP custom recover to unlock bootloader. I accidently downloaded a wrong version of it and flashed it using flashify app, after which i booted into recovery to check the new recover mode. But, something awkward happened. THE BOOT MODE DIDN'T OPEN AND THE SCREEN GOT STUCK AT "Booting into recovery". I read on the internet and realised that my device has got soft-bricked. Also, phone wasn't rebooting. So, i found a solution atleast start my phone. I took out my battery, pressed the buttons for download mode and then placed the battery back in and pressed the buttons for download mode and somewhow rebooted my phone (i read about this technique in xda forums). Now, although my phone works but i cannot access the recovery mode as it has got soft-bricked. Thus, i cannot perform a hard reset as it gets caught in that "recovery booting stuck cycle". So, can anyone tell me how to fix this? PLS QUICKLY. aLSO, i don't know much about ADB, so pls explain that too as my friend suggested me to use ADB to fix softbrick but im not sure!!
:crying:

Categories

Resources