Develop Bugs

[Q] Advanced Ace Hack Kit issue

Earlier today, I ran the updated 15/10/11 version of the ace hack kit. Like it was suggested, I read through the manual then I re-read it and re-read it again. As suggested, I disabled / uninstalled all security software on my pc and the other superfluous services. Ran the executable drivers file then I set the phone to charge only and usb debugging was ticked.
I then ran the hack-ace.cmd file as administrator and let the program do it's thing.
It appeared to have completed without any glitches in the suggested 6 minutes.
However, on the phone, all was not well. Since running this, the screen remains blank. When I power on, I get the HTC logo and then it disappears / disintegrates into a blank screen and nothing happens.
The only reason I ran this was to get rid of the irritating apps that I never use but have to Kill every day.
Can anyone help to overcome this problem? This was a replacement handset that I had to fight with my insurance company to get only for this to happen.
I am literaly at my wits end.
Thanks

anomander0108 said:
Earlier today, I ran the updated 15/10/11 version of the ace hack kit. Like it was suggested, I read through the manual then I re-read it and re-read it again. As suggested, I disabled / uninstalled all security software on my pc and the other superfluous services. Ran the executable drivers file then I set the phone to charge only and usb debugging was ticked.
I then ran the hack-ace.cmd file as administrator and let the program do it's thing.
It appeared to have completed without any glitches in the suggested 6 minutes.
However, on the phone, all was not well. Since running this, the screen remains blank. When I power on, I get the HTC logo and then it disappears / disintegrates into a blank screen and nothing happens.
The only reason I ran this was to get rid of the irritating apps that I never use but have to Kill every day.
Can anyone help to overcome this problem? This was a replacement handset that I had to fight with my insurance company to get only for this to happen.
I am literaly at my wits end.
Thanks
Click to expand...
Click to collapse
i think you need to install custom rom and flash it in recovery follow the steps in instruction in ace hack kit because it happen to me also when I ran the ace hack kit..

avnr said:
i think you need to install custom rom and flash it in recovery follow the steps in instruction in ace hack kit because it happen to me also when I ran the ace hack kit..
Click to expand...
Click to collapse
Yes this is the best thing to do. Something must have corrupted your stock ROM. If AAHK completed properly, then you should have ClockworkMod recovery installed.
The first thing I did was install 4EXT recovery but thats not necessary, that was just a personal choice.
So these are the steps you should take:
1: Download a new ROM and put it on your SD card in a convenient place (I recommend the RCMIX32 Runny 3.1 ROM)
2: Remove the battery and reinsert the battery
3: Hold down the volume down button and then hold down the power button. You will get to a white screen with some green robots on the bottom. This is the bootloader screen. You will have to wait a bit for it to finish scanning the SD card. It will tell you when it is finished
4: Use the volume buttons to select recovery and press the power button to select it
5: After a few seconds the recovery environment will appear
6: Go to the wipe menu. Wipe data, cache and dalvik cache (and system if you have the option. I havent used Clockworkmod in a while so I cant really remember what options you have there)
7: Go a few menu's back and select Install zip from SD card
8: Select the zip file
9: Press yes on the confirmation screen
10: When it is finished, click reboot now. It might be on the menu back
This will install a new ROM and it should work properly. If you have any problems along the way just say and we will help to the best of our ability

Thanks for the responses.
I don't think ClockworkMod is installed as there are no options available when I select recovery. It just reboots the device back to the HTC splash screen which as mentioned then fades / deteriorates to a black screen. I had tried the Android HD Revolution rom but no difference.
One thing I did yesterday in my panic was to select 'Factory reset'. Will this have usb debugging setting?
Finally, when I connect to a pc, it doesn't see it. Is this because it's still set on charge only mode?
I'm probably my own worst enemy

If you finally press "Factory reset" you will reset USB debugging, then you can't root your phone using this tools kit. Try to reinstall the stock rom.
If you didn't root your DHD. Phone may still under warranty.

Hi Guys
I've managed to get this back up and running again.
After a lot of playing about with various file downloads last night, I finally managed to get my pc to see the phone. After that, I just downloaded a stock rom and installed it.
After this fright, I am reluctantly going to stick with this and not bother with rooting / custom roms.
Anyway, many thanks for all your responses, I really appreciate the time you took to helpo me out.
This forum absolutely rocks.

Hi,
I've just downloaded, I read the 'effen' manual and then ran ace-hack, it seems to have worked except I can't see clockwork mod recovery?
I can see superuser and ROMmanager, is it still ok to try and download and flash a custom ROM?
---------- Post added at 09:46 PM ---------- Previous post was at 09:03 PM ----------
Well to confirm my noob status I have now found that clockwork mod recovery is indeed installed (I assume you're not meant to be able to see it as an app as it sits at a lower level).
I downloaded the CM7 ROM, so have booted up into recovery mode, have wiped/formatted as instructed but when I choose the zip file from SD card it appears to start then aborts installation...help!!!!

Hi juicyp
juicyp said:
Hi,
I've just downloaded, I read the 'effen' manual and then ran ace-hack, it seems to have worked except I can't see clockwork mod recovery?
I can see superuser and ROMmanager, is it still ok to try and download and flash a custom ROM?
---------- Post added at 09:46 PM ---------- Previous post was at 09:03 PM ----------
Well to confirm my noob status I have now found that clockwork mod recovery is indeed installed (I assume you're not meant to be able to see it as an app as it sits at a lower level).
I downloaded the CM7 ROM, so have booted up into recovery mode, have wiped/formatted as instructed but when I choose the zip file from SD card it appears to start then aborts installation...help!!!!
Click to expand...
Click to collapse
Did you check the MD5 Checksum of the .zip before you copied it to your SD Card? as it might is some way have got corrupted.
Here is a link to what I always use before I copy anything to my SD Card or install on my OS System:- MD5 Check 2.1.
Take Care
TheQuest

Thanks!
I'm all sorted (I think, fingers crossed).
It was principally because of the mac unzipping (Safari preferences not checked), this was the original and prime fault.
That caused me to doubt my partitions on the SD card (google is sometimes your enemy) which I altered.
So what then happened was CM7 installed but upon reboot looped continuously on the android skateboarding screen.
I finally resorted to formatting the SD Card, reapplying the CM7 zip and the google zips and so far it looks good.
Of course I (me and me alone) has stuffed up all the user data I had on the SD card. I might try to recover some photos but stuff like contacts I can regenerate no major loss there.
Thanks for replying!!

CM7 - the experience thus far
Well its 72 hours since I took the plunge!
Initially it looked odd and felt flakey, the Market refused to download 80% of the apps I tried. I resolved this (not sure if it was the right way) by going into recovery and clearing the cache 2-3 times and eventually downloaded all of my old apps.
Some apps cause frequent force-closes, I assume because they've not been updated for Gingerbread? Thats a very minor irritant, I can easily live without these apps anyway.
Battery life hasn't noticeably altered yet but I suppose I have been constantly been tinkering, playing with settings, trying wifi (seems a little less sensitive to signals) and gauging how the radio is working - I seem to get HSPDA a lot less and resort to 3G more than I previously did?
So, done it, like it despite some minor reservations - now what, is there anything else I can do to improve the experience?
I must add one thing this has shown me - I really really know very little about what goes on under the hood. Despite 20+ years experience in CIS this is a very different world and all credit to those who have developed CM7!!

Please help if you can.. please
Hello!!
I am desperately seeking some guidance. Please.
So, I used to have a HTC Inspire 4G and in June I rooted it successfully.. then installed Cyanogenmod 7 etc.. everything worked great. I unfortunately lost the phone and because of insurance got a new one.
When I rooted the first time I used the old school method that was in the XDA forum.. ADB..etc.. but today... with the new replacement..
I downloaded Advance ace hack kit 29102011 (ahhk 29102011.zip) which after reading all the stuff I thought would be just a quicker way to get rooted. I used the same PC that I used before.
This time, unfortunately I am getting a black screen, right after the HTC splash screen shows up.. it fades to black.
I can get to the "Hboot" screen but removing the battery, then restarting by holding the power and the down vol button.
Tried Factory reset.. still fades to back
Tried Recovery .. still fades to back
The device will not be recognized on my laptop when connected to USB..
Am I stuck? Do I have any options?
I should have done what I did before.. but am at a loss right now.. will you please help me.
Please.
Thanks a million in advance for your responses.
Please help.

ravennyc said:
Hello!!
I am desperately seeking some guidance. Please.
So, I used to have a HTC Inspire 4G and in June I rooted it successfully.. then installed Cyanogenmod 7 etc.. everything worked great. I unfortunately lost the phone and because of insurance got a new one.
When I rooted the first time I used the old school method that was in the XDA forum.. ADB..etc.. but today... with the new replacement..
I downloaded Advance ace hack kit 29102011 (ahhk 29102011.zip) which after reading all the stuff I thought would be just a quicker way to get rooted. I used the same PC that I used before.
This time, unfortunately I am getting a black screen, right after the HTC splash screen shows up.. it fades to black.
I can get to the "Hboot" screen but removing the battery, then restarting by holding the power and the down vol button.
Tried Factory reset.. still fades to back
Tried Recovery .. still fades to back
The device will not be recognized on my laptop when connected to USB..
Am I stuck? Do I have any options?
I should have done what I did before.. but am at a loss right now.. will you please help me.
Please.
Thanks a million in advance for your responses.
Please help.
Click to expand...
Click to collapse
Try to run the latest RUU.

Similar Issue
Hi all,
Similar issue as the thread, during AAHK had a "file not found" issue and now, only get HTC screen fading to black. Getting into HBOOT works fine.
I do have S-OFF but;
Have tried recovery, nothing.
Any RUU nothing
ADB shows device is offline
running any other option in AAHK device offline
Any help would be greatly appreciated.
Cheers!

[Q] htc wildfire s boot loop problem

So i was trying to root my phone and now i won't start, can't even go to bootloader menu or so. when i'm pressing the power up button its just flashes and then shuts down. It loops so frequently that even my pc won't recognize it. What i did to the phone is this:
//androidforums.com/wildfire-s-all-things-root/502772-guide-how-update-htc-wildfire-s-marvel-a510e-gsm-software-version-2-3-5-a.html
i tried to flash a new 2.3.5 to it but now it wont do anything.
Is there any ways to fix this or should i just send this to graveyard :good:

a bit more info plz
alemale said:
So i was trying to root my phone and now i won't start, can't even go to bootloader menu or so. when i'm pressing the power up button its just flashes and then shuts down. It loops so frequently that even my pc won't recognize it. What i did to the phone is this:
//androidforums.com/wildfire-s-all-things-root/502772-guide-how-update-htc-wildfire-s-marvel-a510e-gsm-software-version-2-3-5-a.html
i tried to flash a new 2.3.5 to it but now it wont do anything.
Is there any ways to fix this or should i just send this to graveyard :good:
Click to expand...
Click to collapse
I think you might have soft bricked your phone. Search the forum how to unbrick a soft-bricked phone. That might help
Are you positive that your WFS is GSM -marvel-a510e ?
Also ,Could you be a bit more specific about what happens when you try to go to boot-loader mode or when you try to boot it.
As in the provided link, did you have to perform procedure 3 or did you perform procedure 2 and was it working? A bit more info about what you did could help others analyze the issue

rishr4 said:
I think you might have soft bricked your phone. Search the forum how to unbrick a soft-bricked phone. That might help
Are you positive that your WFS is GSM -marvel-a510e ?
Also ,Could you be a bit more specific about what happens when you try to go to boot-loader mode or when you try to boot it.
As in the provided link, did you have to perform procedure 3 or did you perform procedure 2 and was it working? A bit more info about what you did could help others analyze the issue
Click to expand...
Click to collapse
At the link i did the procedure 1 because my phone couldn't update to 2.3.5 so i tried to update it that way.
when i start the phone it just flashes it's screen and then goes off. it doesn't show htc logo or anything it just flashes some pixels. the loop is so frequent that it happens in 3 sec. Even if i try to start the phone by pressing "volume -" key and "power" key it does same thing, just loops every 3 sec.
I have tried to find a way to fix this but it seem that there is nothing to do because i can't boot to recovery. Is there a way to put the phone to recovery in other way or is here a way to make factory install?
It's really hard to do anything to this phone because my pc won't recognize it in any possible ways and it won't boot to recovery mode.
Do anyone know if i split the phone in to pieces and then manage to boot it or find the system memory and change files in there.

alemale said:
At the link i did the procedure 1 because my phone couldn't update to 2.3.5 so i tried to update it that way.
when i start the phone it just flashes it's screen and then goes off. it doesn't show htc logo or anything it just flashes some pixels. the loop is so frequent that it happens in 3 sec. Even if i try to start the phone by pressing "volume -" key and "power" key it does same thing, just loops every 3 sec.
I have tried to find a way to fix this but it seem that there is nothing to do because i can't boot to recovery. Is there a way to put the phone to recovery in other way or is here a way to make factory install?
It's really hard to do anything to this phone because my pc won't recognize it in any possible ways and it won't boot to recovery mode.
Do anyone know if i split the phone in to pieces and then manage to boot it or find the system memory and change files in there.
Click to expand...
Click to collapse
Even if you want to unbrick the device using back-toback tool , you need to enter the boot-loader mode.
Even for other ways, still it needs to be detected by the PC so that we can pass commands using ADB.
Sorry Dude, I can't help much either I am new to this myself. But i hope somebody here will definitely help you
2. There is a possibility that you could "brick" or bootloop your phone. There are two types of brick: soft (recoverable) and hard (non-recoverable). With a soft brick, the phone will not boot or keeps rebooting ("bootloop"), but it can be started in bootloader mode which allows repair of the ROM. With a hard brick, the phone won't even boot into bootloader after holding the power button for 10 seconds and the phone must be returned to HTC for service.
Click to expand...
Click to collapse
Have you unlocked your Boot-Loader from HTC Dev? Also, you need to install a recovery tool in order to boot into recovery. If you have done only the steps mentioned in the
PROCEDURE 1
Click to expand...
Click to collapse
then you haven't unlocked the boot loader and no recovery is also installed (I believe) . In this case, I think this is a hard-brick(Correct me if am wrong) which is impossible to recover . Anyways, we shall await other replies from DEVs here in the Forum.

rishr4 said:
Even if you want to unbrick the device using back-toback tool , you need to enter the boot-loader mode.
Even for other ways, still it needs to be detected by the PC so that we can pass commands using ADB.
Sorry Dude, I can't help much either I am new to this myself. But i hope somebody here will definitely help you
Have you unlocked your Boot-Loader from HTC Dev? Also, you need to install a recovery tool in order to boot into recovery. If you have done only the steps mentioned in the then you haven't unlocked the boot loader and no recovery is also installed (I believe) . In this case, I think this is a hard-brick(Correct me if am wrong) which is impossible to recover . Anyways, we shall await other replies from DEVs here in the Forum.
Click to expand...
Click to collapse
I tried to unlock the bootloader but it wanted 2.3.5 so i tried to install the new version. now it can't do anything. Well this didn't broke my heart because the phone is pretty worthless . now i have to buy new phone sooner than i planned but still all help is still accepted.

Hi, exactly the same for me : I bought the phone 2 years ago and immediately unbranded it with a goldcard, but never tried to unlock it because it was my wife's and I didn't want to risk anything.
Now she got a new phone, I wanted to play a little with the Wildfire S ^^.
In order to unlock the phone on htcdev I had to update it from 2.13.401.2 to 2.13.401.3, with RUU because can't update with OTA (different CID), with goldcard inside.
After the RUU finished, it says "congratulations everything went well", but actually the phone does not boot, stocked in a loop "quick flash / turns off", can't access bootloader, no USB detection for ADB.
Can't send it to HTC because the 2 years warranty is expired, how ironic ! :laugh:
So... if anyone does know or see any trick that could help to boot anything on this "seems to be hard-bricked" kid... huge thanks to you

[Q] Samsung S2 T989 not starting and booting in loop

Hi,
I am a newb to this.
Have gone through the below links to unlocks my new samsung s2 t989 (locked totmobile)
Below is the step followed to unlock
Tried the steps mentioned in the below post
http://forum.xda-developers.com/show....php?t=2024514
Didnt work. Going through the forum again i understood i need to install the new radio UVLE1
Followed the below link to install
http://forum.xda-developers.com/show...&postcount=145
Only deviation done was to enter to download mode as the steps mentioned in the above forum didnt work.
So reffered to the youtube link for the same -
http://www.youtube.com/watch?v=hHi0SIu7cXk
Then follwed the rest of steps as explained by OP.
Unfortunatly i was not able to find any range for the Tmobile SIM and the phone started to work very slowly.
Then i trien unlocking after entering
Go to dailer screen. press *#197328640#
Though it was a bit slow i was able to navigate to the screen with DEUG Screen option -
The screen will change to the hidden menu as soon as you hit the last # key in the dailer
press [1]DEBUG SCREEN
When i press on 1 nothing was happening. waited for a long time.
I think the greatest mistake i did after this was tried to reset to factory setting. I assume the software crashed and i am now not able to switch on the phone.
i am able to get to the boot options with various options
Also the cloclworkMod Recovery v5.0.2.7 is displayed in the screen.
Can some one help me with options to restart my phone and make it to work as normal.
A detailed explanation with links would help me as i am completly a newb to this.
Many thanks in advance.

So have u tried to flash a stock tmobile rom, radio and kernel through CWM? Find a rom like embryo, jedi mind trick 5 or something, flash that via CWM and u should be good, if u can boot into recovery then ur ok, u can fix that
Sent from my SGH-T989 using Tapatalk 4 Beta

I want to root my ZE551ML but I don't know what to do pls help.

I tried to root my phone last night, but I stop midway of the process because of some problems like "phone not turning on with no vibrate at all when I restart after its stuck to inverted white screen, when I luckily turn it back on but it bootloops".
Heres the details:
I run unlock.bat then after its done it reboots with inverted white screen with logo then I run restore.bat and after it restart there is no sign of warning "failed verification" until it fully loads up, I go back to fastboot again to flash TWRP after running twrp.bat it says "flash succesfully" and the program closed by itself, then I go to recovery mode after rebooting I saw android error just like how it use to be. I press power button + volume up then release the volume up then I see the stock recovery (which it should be TWRP since I've done flashing it).
I think that my bootloader is still locked since there's no warning display of "failed verification". So I repeat the steps again after running unlock.bat, it reboots and the screen is inverted but it's stuck up to white logo, I waited for a while but nothing happens so I tried to reboot my phone "holding power button (power off)" when power on, it wont turn on, no vibration just a sound on laptop "connected sound and disconnected sound" I tried to power it on many times but still no luck I got panicked, jittery walking back and forth :crying:. Then I disconnect the usb cable and I tried to turn it on and suddenly I feel the vibration on my phone then it boots up but still stuck in white screen then it restart after keeping it for too long (while watching videos related to my problem)...
then my friend here said "ohh it bootloop" he read the instruction and he said to try this
"FAQ 1. Stuck at white screen with asus logo?
Sol. a) White screen means you are unlocked (action of unlock.bat), so you may give a try to restore.bat in fastboot mode."
and it solve my problem my phone is working again ... But I want to continue to root it but I'm afraid which steps I should go next, I still don't see the warning "failed verification" after my phone boots up and works again... I need HELP thank you
I also got question: is my bootloader unlock since it inverted white screen? or it still locked since there no sign of warning "failed verification"?

@PrinceLys
What is your build number in settings ,about phone ?

timbernot said:
@PrinceLys
What is your build number in settings ,about phone ?
Click to expand...
Click to collapse
ahmm I think this?
model number: ASUS_Z00AD
android version: 6.0.1
software information: WW_4.21.40.223_20161216
P.S my phone is back on working state.
I just don't know if I can proceed to root after the incident. I don't know, I just want to make sure that my bootloader is still unlocked after what I've done (it did white screen with black asus logo) or.... it doesn't unlocked at all since I don't see this warning "your device has failed verification and may not work properly." (I've attach screenshot from the video tutorial)
I tried to manualy check if my bootloader is really on unlock state but I can't using these methods
method 1: on device’s dialer dial *#*#7378423#*#* (failed)
method 2: fastboot oem device-info (failed)
my recovery it still on stock recovery even after I flash twrp
btw guide source: https://forum.xda-developers.com/zenfone2/general/root-install-xposed-marshmallow-6-0-1-t3456443
Q: should I still continue to flash twrp until it install?

Theres 2 bootloader unlock tools in general section , one is automatic

Read this from start to finish before doing anything.. also have on another device to refer to as you are doing the steps also download the ROM and gapps you want and put on SD card before you start even if you have to download them and move them from PC to SD card. https://plus.google.com/113955136844726294013/posts/aLJdNZN3g8q
Sent from my ASUS_Z00A using Tapatalk

timbernot said:
Theres 2 bootloader unlock tools in general section , one is automatic
Click to expand...
Click to collapse
I'm going to look for it... thanks

musicman5844 said:
Read this from start to finish before doing anything.. also have on another device to refer to as you are doing the steps also download the ROM and gapps you want and put on SD card before you start even if you have to download them and move them from PC to SD card. https://plus.google.com/113955136844726294013/posts/aLJdNZN3g8q
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
I've haven't fully read the instruction maybe tomorrow I will read it.
I just downloaded the files early and look into it... it seems like the versions are kinda latest (I don't know much about the droidboot ver. but I just look at the number on it "the higher the latest /heh") also the twrp is 3.0.3.
the ones that I used are all in package and it was 3.0.2 so I kinda go for the link you gave me
Thanks :good:

Hi,I've had the same situation,but it is solved now.If you have any problem,maybe I can help you .

nanobrain---- said:
Hi,I've had the same situation,but it is solved now.If you have any problem,maybe I can help you .
Click to expand...
Click to collapse
(I've finally think my bootloader is unlock after all.)
btw, did you succesfylly flash twrp?
Mine didn't flash (using twrp.bat), I guess I will try it again tonight if it fails again im gonna dl twrp from official and manually flash it.

I've Made a BooBoo :(

I was so excited to buy a Z5 quite cheap from online store (GumTree Australia). Received it and went to turn it on, it was locked to someone's account (not the last owner I assumed). No biggee I thought, so I did a bit of research to find out how to factory reset wipe my phone and find the Sony app 'EMMA'. Booted my phone into that app and it showed that this phone was locked and I couldn't do anything other than visit a couple links it suggested to update my phone or contact Sony to unlock my bootloader. I did all that it suggested waiting on Sony to no reply.
3 months later, I decided to give this phone another go and came looking at XDA. Impatiently wanting to unlock, I found a flashtool on XDA https://forum.xda-developers.com/z5-premium/general/firmware-32-3-0-372-certified-android-7-t3537948 and decided to wing it with this image https://redirect.viglink.com/?format=go&jsonp=vglnk_14958424411279&key=f0a7f91912ae2b52e0700f73990eb321&libId=j36hx1cx01000n4o000DAnhl9jzwv&loc=https%3A%2F%2Fforum.xda-developers.com%2Fz5-premium%2Fgeneral%2Ffirmware-32-3-0-372-certified-android-7-t3537948&v=1&out=https%3A%2F%2Fdrive.google.com%2Fdrive%2Ffolders%2F0B9es25_rAF5bbnhPZ2pLQjQyd2M%3Fusp%3Dsharing&ref=https%3A%2F%2Fforum.xda-developers.com%2Fz5-premium&title=Firmware%20Android%20N%207.0%2032.3.A.2.33%20link%20.ftf%E2%80%A6%20%7C%20Sony%20Xperia%20Z5%20Premium&txt=https%3A%2F%2Fdrive.google.com%2Fdrive%2Ffolde...2M%3Fusp%3Dsharing.
Long story short, my impatience and winging it after following onscreen instructions from the tool has now made the phone unbootable. Screen turns on but it's all black. I plug my phone in to the computer and it is recognised by EMMA and Windows. But I can't do the recovery boot with volume down.
I just want to put it back to how it was with a simple wipe. Is there a way I can get it back to just "normal" please.
My excitement has now left me with anxiety issues lol. Please help....

Use flashtool and go to XperiFirm and download the full ROM by browsing to the correct phone model and country (Use somewhere like Custom Indonesia, Custom UK, Custom Germany, etc.)
Then simply click flash button, choose the ROM, make some checkbox such that it flashes absolutely everything, and then follow on-screen instruction to do a full flash. Volume Up and Power force turns your phone off, and then plug the USB and press the instructed volume button right away to enter into flash mode, and then things will work on its own.
I would just use XperiFirm to download the ROM image. But do make sure you're downloading the ROM for the correct phone model.

DarkSilentSC said:
Then simply click flash button, choose the ROM, make some checkbox such that it flashes absolutely everything, and then follow on-screen instruction to do a full flash. Volume Up and Power force turns your phone off, and then plug the USB and press the instructed volume button right away to enter into flash mode, and then things will work on its own.
I would just use XperiFirm to download the ROM image. But do make sure you're downloading the ROM for the correct phone model.
Click to expand...
Click to collapse
Life saver!! Thank you so much. I've got the phone working now and I understand how XperiFirm works.... sort of.
I'm now stuck on FRP lock where I have to enter the last email used to sync the device. I've tried the instructions from this thread and watched the video and mine doesn't do what is shown on the video to get into the settings to switch users.
https://forum.xda-developers.com/z5-premium/general/how-to-tottaly-unlock-xperia-z5-premium-t3585640#post72448042
I'm gonna keep reading and see if there's another way around. But if anyone is reading this, please feel free to guide me.
Thanking you DarkSilent again.

UPDATE
Found this video and it helped me to bypass FRP.
Thank you once again. I'm very happy now.