I apologize if this is already a thread in here somewhere, but I searched first with no luck. I have/ had a rooted galaxy note 2 done by method of the galaxy note 2 tool kit. I went and installed AOKP 4.2.2 but my sound wasn't working so I went to load a back up through CWM. after I slid the accept slider to start it went to a screen with " Firmware Upgrade encountered an issue. please select recovery mode in Kies & try again." I have tried to flash the stock recovery with odin and It gets to the point of recovery, and then fails. is there a fix for this?
I have seen the videos on how to use TWRP, and CWM using the recovery mode on the phone, but it doesn't allow me to enter that mode using the volume up, power and home buttons. all I can access on the phone is the download mode through ODIN.
If u can't get into recovery then use download mode and flash a stock rom through Odin. I would use the mc2 stock tar in the development section.
Sent from my SPH-L900 using xda premium
if you can't enter a custom recover with the power-up+home+power combo, I suspect you don't have a custom recover installed--TWRP or CWM. Sounds like you have just the stock recovery.
I suggest trying to Toolkit and install just a custom recovery. If you do, I suggest downloading the TAR file from the recovery prefer. If you haven't used one before, I like TWRP.
If everything goes well, all you'll need to do is just flash a rom you like. won't need to be stock.
Related
I recently flashed my phone by odin because its touchscreen didn't work. it got back to work after flashing. But when I want to go in recovery mode the android and box logos appear but nothing written on the screen and after a while it restart itself. So I can't root my phone!
What's the problem?
I think something with your recovery image is wrong with have you tried flashing it again?
Sent from my GT-I8150 using xda app-developers app
I used a stock firmware package.
I didn't tried again because its a risky procedure.
if you in stock recovery, once the green android logo appear, just press the phone menu button, then your screen will dim...
wait for a while, it will lead you to the recovery menu mode...
You want to root your phone?
but let me know something 1st, when you boot your device to recovery, is there something coming like clockwordmod or stock recovery ?
If NO then dont try to re-flash your stock ROM via ODIN, maybe brick your device,
Simple is that. Download ODIN and ClockwordMOD file and turn your device into Download Mode by following link
http://mygalaxywonder.blogspot.com/2012/03/how-to-install-clockworkmod-v5504-for.html
AND Install any custom ROM
if you have still doubt or problem then message me or reply me here.. i'll give you all method step by step.
mat1371 said:
I recently flashed my phone by odin because its touchscreen didn't work. it got back to work after flashing. But when I want to go in recovery mode the android and box logos appear but nothing written on the screen and after a while it restart itself. So I can't root my phone!
What's the problem?
Click to expand...
Click to collapse
just flash the CWM from odin instead. i'm pretty sure it will replace that not working recovery
Recently had to replace my E4GT and the new device was sent to me with FI27 firmware. I want to install Blue Kuban or something similar, however I can't get the phone to boot into recovery. I can access download mode, which I used to flash a rooted version of the stock rom, however when I try to boot into recovery (holding power and volume up) the phone displays the samsung boot screen twice then boots like normal. Can I flash to a CWM or something through Odin in download mode, to gain access to custom firmware and recovery mode? Assuming I can, is there a preferred firmware to use now?
Get the el26 kernel that had cwm recovery in it and flash thru odin .
When the phone resets pull out the battery and place it back put the phone then boot into recovery
Sent from my SPH-D710 using xda app-developers app
beneboi said:
Recently had to replace my E4GT and the new device was sent to me with FI27 firmware. I want to install Blue Kuban or something similar, however I can't get the phone to boot into recovery. I can access download mode, which I used to flash a rooted version of the stock rom, however when I try to boot into recovery (holding power and volume up) the phone displays the samsung boot screen twice then boots like normal. Can I flash to a CWM or something through Odin in download mode, to gain access to custom firmware and recovery mode? Assuming I can, is there a preferred firmware to use now?
Click to expand...
Click to collapse
Post 2. http://forum.xda-developers.com/showthread.php?t=1953783
Sent from my SPH-D710 using xda app-developers app
BluesRulez said:
Post 2. http://forum.xda-developers.com/showthread.php?t=1953783
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
I really appreciate the guide, and I followed it, installed odin lite, got the right apk for my phone to flash, grabbed the cwm and flashed it, however I still can't boot to recovery and obviously can no longer boot back into the rom I had. I suppose I will wait until I get home and use odin on my pc to flash, as I can access download mode. Can I use the same cwm with the pc version of odin?
Ok, so things have gone from bad to worse.
I was able to flash the stock el26 with odin and got it back to factory, after that i booted into recovery and attempted to install blu kuban (after clearing everything) and it gives me a short write error about not enough space but I have over 10gb free on the phone and 20 on the sd card. I then attempted the mobile odin steps again VERBATIM from your guide and when the phone reset it soft bricked again, however this time it wont boot into recovery or download mode and just sits at the samsung logo screen. When I plug the phone into the pc and attempt to boot into anything the charging animation just freezes on the screen. any help would be greatly appreciated.
(edit) nevermind, im an idiot. figured it out.
I'm new to Android and tried to flash a customer ROM and am now stuck in a boot loop. Any help will be appreciated and I'll try to explain myself the best I can.
1. I have a Bell Note 2 and rooted with the CF auto root process
2. I upgraded SuperSU after the root reboot and installed the reboot checker. it said i was rooted.
3. I used titanium backup to backup candy crush
4. I installed ROM Manager and installed ClockWorkMod Recovery. My Note 2 wasn't supported, but I read that i could use the international version from the list so i did that. Everything said it was successful.
5. I downloaded the DN3 Rom from the forums here and transferred to my SD card.
6. I booted into CWM Recovery and did a backup from the options there.
7. Then I chose to install a customer rom and searched for the zip file on my microSD card.
8. The DN3 splash screen came up and took me through some install screens. I chose everything for the SGH-i317M options during the install.
9. it rebooted and loops between the samsung note II splash screen the CWM recovery 6.0.4.3 screen for a second and continues to loop between the two.
I can't get to the CWM recovery screen. if i try it just keeps looping. I'm sitting in the odin mode screen now and i think i need to install a stock rom. Can anyone point me in the right direction to at least get it working? then i'll need to see what i did wrong. thanks.
So i'm in odin mode and found a stock rom to reinstall. it gets to Modem, then fails so i'm not sure if i grabbed the wrong one. I believe i can install a rom through odin now that i can get to odin mode, is that right? but i can't really find any roms around to load cause all the ones i fond are zip files. Do i need to find an MD5/tar file? and where would i find them?
Try sammobile.com
Thanks for the reply. I tried that but the share for the firmware was no good. I ended up resolving it through Keis emergency firmware update.
AntonovichNS said:
Thanks for the reply. I tried that but the share for the firmware was no good. I ended up resolving it through Keis emergency firmware update.
Click to expand...
Click to collapse
That's good you figured it out yourself...:thumbup:
That's what I was going to recommend to you...
Me 2¢®
Sent from my SAMSUNG-SGH-I317 using Tapatalk
I follow this thread: http://forum.xda-developers.com/showthread.php?t=2549068
I put this file on the sd card debrick-SGH-I747U-CUEMJB3.img, made sure phone battery was charged up. Tried to enter download mode, it completely skipped it and phone is now running stock 4.3?? I try to enter recovery mode and it still just starts up with Stock 4.3.
So I assume it is running completely of the sd card. I can enter Stock Recovery but not sure what I do now. If i pull the card the phone is dead like before. Red light when plugged in, nothing happens with any button pushes.
I guess I am wondering what my next step is?
Thanks
Ruscicap said:
I follow this thread: http://forum.xda-developers.com/showthread.php?t=2549068
I put this file on the sd card debrick-SGH-I747U-CUEMJB3.img, made sure phone battery was charged up. Tried to enter download mode, it completely skipped it and phone is now running stock 4.3?? I try to enter recovery mode and it still just starts up with Stock 4.3.
So I assume it is running completely of the sd card. I can enter Stock Recovery but not sure what I do now. If i pull the card the phone is dead like before. Red light when plugged in, nothing happens with any button pushes.
I guess I am wondering what my next step is?
Thanks
Click to expand...
Click to collapse
The device is indeed booting off the SD card. However, if you can boot into system, you should also be able to boot into download and recovery modes using the 3-button combo. If you can get into download mode, you can try using Odin v 3.07 to flash the complete 4.3 stock image. Download the Odin flashable zip file from the link below to your computer. Extract the tar.md5 file and verify the MD5 to be sure it downloaded correctly.
http://www.androidfilehost.com/?fid=23329332407590581
Download Odin v3.07 and run Odin.exe for the flashing tool. With your debrick card, boot into download mode by pressing the Volume Down, Home and Power button. If you can't get into download mode with the 3-button combo, suggest you try a USB jig. Use Odin to flash the stock file to your phone. If the flashing is successful, the device should be able to boot normally after this without the debrick card.
Cool thanks Larry2999. I will have to go the USB jig route it won't go into recovery or download. I can only get into Stock recovery. Any specifics I need to know when getting a usb jig? Thanks again for you response. I am just glad it is working now. But probably don't want to run off SD forever.
Ruscicap said:
Cool thanks Larry2999. I will have to go the USB jig route it won't go into recovery or download. I can only get into Stock recovery. Any specifics I need to know when getting a usb jig? Thanks again for you response. I am just glad it is working now. But probably don't want to run off SD forever.
Click to expand...
Click to collapse
There is a thread somewhere on how to make a D-I-Y jig. You can, however, buy it cheaply online for about $3. In buying one, you'd only need to be sure it states that it works with the S3.
Looks like you are able to get into recovery now but you have stock, rather than custom, recovery. There is only one recovery partition and the default is stock, unless, you flash a custom recovery. If you had custom recovery, it would have been possible to flash a 4.3 stock restore zip via (custom) recovery. To flash custom recovery, however, you'd need Odin in download mode so we are back to the problem with getting into download mode.
Thanks Larry ordering jig tomorrow
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Larry2999 said:
There is a thread somewhere on how to make a D-I-Y jig. You can, however, buy it cheaply online for about $3. In buying one, you'd only need to be sure it states that it works with the S3.
Looks like you are able to get into recovery now but you have stock, rather than custom, recovery. There is only one recovery partition and the default is stock, unless, you flash a custom recovery. If you had custom recovery, it would have been possible to flash a 4.3 stock restore zip via (custom) recovery. To flash custom recovery, however, you'd need Odin in download mode so we are back to the problem with getting into download mode.
Click to expand...
Click to collapse
Do you suggest a reliable 4.3 stock to flash or install through ODIN? This is how I got to where I am, something screwed up trying to install stock 4.3 through ODIN.
Thanks again for your help. Jig should be here in a couple days.
Ruscicap said:
Do you suggest a reliable 4.3 stock to flash or install through ODIN? This is how I got to where I am, something screwed up trying to install stock 4.3 through ODIN.
Thanks again for your help. Jig should be here in a couple days.
Click to expand...
Click to collapse
Yes, the ONLY way to recover is to flash a complete 4.3 stock image. Are you sure you bricked in the first instance by flashing 4.3 via Odin? The only Odin compatible stock 4.3 file I'm aware of is the one in the link I forwarded earlier. This was only recently developed and appears to have been used by several people without problem. You may check to be sure you were not trying to flash a 4.1.1 file in error. Apologies if I sound like I'm second guessing you but flashing 4.1.1 via Odin usually results in the kind of hard brick you experienced.
The other alternative would be to flash custom recovery (TWRP or CWM) via Odin and then use custom recovery to flash a complete 4.3 stock image. You will find the instructions in the following thread ...
http://forum.xda-developers.com/showthread.php?t=2658486
Download the stock restore zip for your preferred custom recovery option to your PC and save to your phone's internal storage. If you want to use TWRP, you can find the Odin flashable file for TWRP via the link below ...
http://techerrata.com/file/twrp2/d2att/openrecovery-twrp-2.6.3.1-d2att.tar
If, however, you go the first option and flash the 4.3 file via Odin, be sure to use Odin v 3.07. You'll see the Odin flashable file and instructions on page 4 of the following thread ...
http://forum.xda-developers.com/showthread.php?t=2722660&page=4
or you can download directly from here ...
http://www.androidfilehost.com/?fid=23329332407590581
Thanks again. Not really sure what went wrong, tried to use odin to install 4.3 Stock from this thread. http://forum.xda-developers.com/showthread.php?t=2658486
I will try to follow your threads and get it right this time.
Ruscicap said:
Thanks again. Not really sure what went wrong, tried to use odin to install 4.3 Stock from this thread. http://forum.xda-developers.com/showthread.php?t=2658486
I will try to follow your threads and get it right this time.
Click to expand...
Click to collapse
The file from that thread is for (custom) recovery only. You can't flash zips via Odin so if you are using that file, you would need to first install custom recovery via Odin and then flash the zip via custom recovery.
Hey Larry, just wanted to say thanks. Phone is back working properly, 4.3 installed with no problem. Took me awhile never had the time. So fathers day was my chance to get this working. Flashed twrp and then the stock zip. Worked great.
Thanks again for all your help, I very much appreciate it.
Ruscicap said:
Hey Larry, just wanted to say thanks. Phone is back working properly, 4.3 installed with no problem. Took me awhile never had the time. So fathers day was my chance to get this working. Flashed twrp and then the stock zip. Worked great.
Thanks again for all your help, I very much appreciate it.
Click to expand...
Click to collapse
Glad to know it's working OK now. Kind regards
I have a Samsung Galaxy S3 AT&T and for about a year and a half always wanted to root it but had no idea how. I had an iPhone a while back and used to jailbreak it I became an expert at it. Rooting is not so easy compared at least with the problems I've been experiencing
I started by watching hundreds of root videos and ended up rooting it with Odin and Kit Kat tar file im not sure of the specific file but I'm almost 100% it was my version 4.4.2 that I flashed.
After I did this I downloaded the basics and tried to get TWRP but gooManager wasnt working for some reason.
I tried to flash the Cyanongen 11 onto my phone using the installer for the comp and on google play store and it worked up until the end I got the dead droid symbol for a bit and it finished downloading to show the "ROM may flash stock recover on boot. Fix?" error message and I selected no and "Root Access Possibly Lost Fix?" I also selected no. My phone booted with no custom rom still rooted and most of my apps are unresponsive and close randomly except facebook and youtube.
I decided I wanted to return it to stock rom and try again but when I downloaded the stock tar file and tried to flash it I got this
I'm not sure what to do because I cant return it to stock rom, clockmod recovery has stopped working, and every video I watch about how to fix it is only making it worse.
If you have any idea what I can do or what I'm doing wrong let me know.
Odin failed because you cannot flash older firmware. Your best bet is to reflash recovery via Odin, then if you want stock go to enewman17's stock rom/system dump thread in development and flash the rom and factory reset.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
DocHoliday77 said:
Odin failed because you cannot flash older firmware. Your best bet is to reflash recovery via Odin, then if you want stock go to enewman17's stock rom/system dump thread in development and flash the rom and factory reset.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
I tried to flash cwm recovery onto my phone usb debugging selected and now odin doesnt even show that my phones recognized. This is so frustrating.
I suggest installing Philz Touch recovery via Odin and using Philz to flash a custom ROM to at least get your phone up and running.
devito35 said:
I tried to flash cwm recovery onto my phone usb debugging selected and now odin doesnt even show that my phones recognized. This is so frustrating.
Click to expand...
Click to collapse
If Kies is on your computer, remove it. Have you tried reinstalling drivers?
Sent from my SAMSUNG-SGH-I747 using Tapatalk