Develop Bugs

[Q] rooting uk 4.0.4 build 4.1.L.0.8 arc s

i have a lt18i arc s with android 4.0.4 build 4.1.L.0.8 there are loads of threads on here but not are for this version, can someone point me in the correct direction.
i went on the sony developers blog and used the *#*#service#*#* and phone software version is:
1253-8238_4.1.L.0.8
GENERIC-user
all the posts have 4.1.B.0.431 not 4.1.L.0.8 i really would like root access and im stuck

It doesn't matter what build it is. The procedure is the same for all ROMs:
0. backup important things
1. downgrade to .403 (only kernel)
2. root (doomlord)
4. upgrade back to .404 (only kernel)
5. enjoy
LE. Whoops! Sorry! Now I notice that really exists a new firmware certified on 19 june. Anyway, you still can flash a *.431 fw.

ctinro said:
It doesn't matter what build it is. The procedure is the same for all ROMs:
0. backup important things
1. downgrade to .403 (only kernel)
2. root (doomlord)
4. upgrade back to .404 (only kernel)
5. enjoy
Click to expand...
Click to collapse
can you send me a link to a "guide/tutorial" for the downgrade procedure?

deanage1983 said:
can you send me a link to a "guide/tutorial" for the downgrade procedure?
Click to expand...
Click to collapse
Can't root same build number 4.1.B.0.431 ?

l3lieveOne said:
Can't root same build number 4.1.B.0.431 ?
Click to expand...
Click to collapse
now im confused?

deanage1983 said:
can you send me a link to a "guide/tutorial" for the downgrade procedure?
Click to expand...
Click to collapse
Here it is.
In this thread it is somehow different from what I said.
But, essentially, I did what I said: I had already the .404 installed, I downgraded to .403 flashing the `ready to root` (do not wipe anything [unchecked all], and leave kernel only [check all but kernel]), than rooted the phone and, finally, upgrading back to .404 using the initial kernel only.

ctinro said:
Here it is.
In this thread it is somehow different from what I said.
But, essentially, I did what I said: I had already the .404 installed, I downgraded to .403 flashing the `ready to root` (do not wipe anything [unchecked all], and leave kernel only [check all but kernel]), than rooted the phone and, finally, upgrading back to .404 using the initial kernel only.
Click to expand...
Click to collapse
thanks i will do just that
which do i use greece or iberia?
im in uk and have lt18i arc s

deanage1983 said:
which do i use greece or iberia? im in uk and have lt18i arc s
Click to expand...
Click to collapse
It does not matter, as long as you are on the old continent
I used Central European. Maybe Generic Global World?

ctinro said:
It does not matter, as long as you are on the old continent
I used Central European. Maybe Generic Global World?
Click to expand...
Click to collapse
please excuse my ignorance but what do you mean "old continent" ?

deanage1983 said:
please excuse my ignorance but what do you mean "old continent" ?
Click to expand...
Click to collapse
old continent = Europe
Sorry, it was a joke on the fact that Great Britain is an island. Nothing irreverent.

Root Xperia Arc LT18i 4.1.L.0.8
deanage1983 said:
i have a lt18i arc s with android 4.0.4 build 4.1.L.0.8 there are loads of threads on here but not are for this version, can someone point me in the correct direction.
i went on the sony developers blog and used the *#*#service#*#* and phone software version is:
1253-8238_4.1.L.0.8
GENERIC-user
all the posts have 4.1.B.0.431 not 4.1.L.0.8 i really would like root access and im stuck
Click to expand...
Click to collapse
Perfect guide for rooting U.K. Three Xperia Arc LT18i 4.1.L.0.8 only...
Rooting your mobile may void the warranty and you are doing it at your own risk. Sony would be in no way responsible for any damage...
Go to settings > Security > Mark "Unknown sources"
Settings > Developer options > Mark USB debugging
Settings > Xperia > connectivity > USB connection mode > select MSC mode
================================================== ==================================================
You should have
Flashtool
http://androxyde.github.com/Flashtool/
------Download------
1 ) Arc S - Kernel
http://www.4shared.com/file/qNTvdPI6/Lt18i_41A0562_Kernel.html
2) Go to C:/ Drive > flashtool > firmwares > delete everything present and Put the kernel
3) Run Flashtool click on the flashing icon ( left side below "file" option)
Select flashmode > ok
Setup should be like this > select OK
Follow the steps connect your mobile and flash.
Flashtool may show error after flashing kernel, no worries. Even your build number, android version won't change. Everything would remain same. So please don't go to phone settings to check anything
4) After flashing restart your device, It may not start completely, may remain at Sony logo or blank/black.
Whatever the status is, just restart your device and proceed with the rooting--->
( Make sure you close flashtool before running the rooting toolkit )
Now connect your mobile to PC and Root Your Phone
If you face problem in downloading the toolkit then here it is
http://www.mediafire.com/?7dp5k73by10inbf
[ READ THE FOLLOWING CAREFULLY! ]
This script will:__________
1.root ur device using "andorid emulator" trick
2.install Busybox (1.18.4)
3.install SU files (ICS specific)
4.do some checks for free space, tmp directory (will remove Google Maps if required)
Before u begin:___________
1.make sure u have installed adb drivers for ur device
2.enable "USB DEBUGGING" - from (Menu\Settings\Developer Options\Development)
3.enable "UNKNOWN SOURCES" - from (Menu\Settings\Security)
4.[OPTIONAL] increase screen timeout to 10 minutes
5.connect USB cable to PHONE and then connect to PC
6.skip "PC Companion Software" prompt on device
[ WARNING ]
make sure that no other adb server is running in background (e.g.: Flashtool, PCC, SEUS) and disable any antivirus
[ How to install? ]
1.extract ALL the files in the zip
2.now just double click on "runme.bat"
3.sit back read the on screen instructions
4.the device will reboot a couple of times
5.when the script finishes it will say "ALL DONE"
5) Download 4.1.L.0.8 Kernel here....
http://www.4shared.com/zip/u6W3yREf/LT18i_41L08_Kernel.html
Credits goes to Androxyde, Bin4ry, Doomlord
and
Dhruv Shah for uploading 4.1.L.0.8 Kernel

[Tutorial][ION] Flashing Firmware and Rooting (Updated 15/11/2012)

[FONT=Albany, Arial]Flashing latest firmware (upgrading & updating) and rooting[/FONT]
For Sony Xperia ION LT28 Series – Locked and Unlocked Boot loaders.
THIS TUTORIAL IS IS NOT APPLICABLE FOR ROOTING ICS 6.1.E.3.7 LT28i and LT28h FIRMWARES.
To root these firmwares:
1. Follow Spectre's thread for Pre-rooted firmwares
OR
2. My thread for flashing stock kernel with root. (unlocked boot loaders only)
Click to expand...
Click to collapse
This guide is for everyone who wishes to flash the latest ION firmware and then proceed on to root it.
Though this guide is for Xperia ION, but I suppose, this is quite universal and applicable to all Xperia Phones.
Read carefully and understand clearly the process before starting the actual process of flashing. When in doubt, ask your queries in this forum and wait for it to get answered.
The Xperia ION Lt28 exists in 4 variants.
AT&T version with LTE. ( Lt28at )
Rogers Version with LTE. ( Lt28rogers )
International Version with LTE. ( Lt28i )
Version without LTE. ( Lt28h )
Getting Ready
There a a few very essential things that need to be sorted out before you could flash a firmware. I am listing them below.
Connecting the phone to the PC and making it recognize the phone.
(Windows only):
When you connect the phone to the PC for the first time, the phone will prompt you to install the PC Companion S/w on your pc. Go ahead and Install it. In addition to this, essential drivers required for connectivity will also be installed. In windows , both MTP and MSC modes of connectivity work. MTP mode allows access to both Internal and External SD card. MSC mode will allow access of only the External SD card.
Click to expand...
Click to collapse
(Linux Only):
It is a little tricky in the case of linux to achieve connectivity. The following are the steps you need to follow:
1. Open Command Window, “ terminal” in case of Gnome base Linux and “konsole” in the case of KDE based Linux. It should be easily accessable through menu.
2. Inside the Command Window type “ sudo gedit /etc/udev/rules.d/51-android.rules” if you are using Gnome or “sudo kwrite /etc/udev/rules.d/51-android.rules” for KDE.
3. Add the below lines into the file and save it.
#Sony Ericsson
SUBSYSTEM=="usb", ATTR{idVendor}=="0fce", MODE="0666"
4. Execute the following command from command window:
chmod a+r /etc/udev/rules.d/51-android.rules
5. Restart Linux now.
6. Connect the phone to the PC, open Command Window and type “ lsusb” without the quotes and press Enter. You should see an output, and you should see a line with the following:
ID 0fce:6177 Sony Ericsson Mobile Communications AB
7. If you don't see it, then you have made a mistake in the previous steps. Retrace the steps again to see that they are correct.
8. Open the phone, go to settings and select Xperia Settings and then select connectivity. Select USB Connection mode as “ Mass Storage Mode (MSC)”. The MTP mode does not work in linux. The support is not yet available.
9. Now when you connect the phone to the Pc it will mount the external_sd card automatically.
The above steps just ensures that the Phone is recognized by the PC and
Click to expand...
Click to collapse
Download and Install flashtool and Drivers:
Download flashtool:
Link1 ( http://androxyde.github.com/)
Link 2 Linux ( http://www.sendspace.com/file/0pz8ru)
Link3 Windows ( http://www.mediafire.com/?9d64a4twrqd3w7y)
Click to expand...
Click to collapse
Install Drivers:
( Windows Only) After installing Flashtool, navigate into the flashtool folder and go into drivers folder. Double click on the Flashtool-drivers.exe to install the drivers. Restart the computer. This step is not required for Linux Users.
Click to expand...
Click to collapse
Download and Install Android Sdk. (Not Mandatory)
Downloading Android Sdk:
Android Sdk can be downloaded from here. ( http://developer.android.com/sdk/index.html)
Click on the “SYSTEM REQUIREMENTS” to check that you sysytem meets the minimum requirement.
The downloads are under “SDK Tools Only” section.
Click to expand...
Click to collapse
Setting up Android Sdk:
( Windows Only) Installing in Windows is as simple as clicking in the downloaded exe. After installing, start the Sdk Manager. In windows it can be accessed from the start menu. Select Tools Checkbox and then Install Button. Wait for the installation to complete.
Click to expand...
Click to collapse
Set up the PATH environment variable to access adb:
( Windows 7)
Select Computer from the Start menu
Choose System Properties from the context menu
Click Advanced system settings > Advanced tab
Click on Environment Variables, under System Variables, find PATH, and click on it.
At the end add the path to android-sdk tools and platform-tools folder.
(Windows XP)
Start -> Control Panel -> System -> Advanced
Click on Environment Variables, under System Variables, find PATH, and click on it.
At the end add the path to android-sdk tools and platform-tools folder.
Click to expand...
Click to collapse
Setting up Android Sdk:
(Linux Only)
Right click on the downloaded .tgz file and extract it. Probably, it will create a folder “android-sdk-linux”. Copy the folder to root of your home. Open the file manager and navigate to the android-sdk-linux/tools folder and click on android script to execute it.
It will start the Android Sdk Manager. Select Tools Checkbox and then Install Button. Wait for the installation to complete.
Click to expand...
Click to collapse
Set up the PATH environment variable to access adb:
(Linux Only)
Now to set up the PATH environment variable to access adb. For this you need to edit the .bashrc file to setup the path so that adb can be accessed by just typing the command.
Open the command window and type “gedit ~/.bashrc” or “kwrite ~/.bashrc” and add the following lines and save it.
export PATH=${PATH}:~/android-sdk-linux/tools
export PATH=${PATH}:~/android-sdk-linux/platform-tools
Restart the PC.
Click to expand...
Click to collapse
Proceed to POST#2 for FLASHING Steps.

Flashing and Rooting ICS on any Xperia ION
Flashing Firmware:
Now comes the easiest part.
So if you have completed the steps from post#1, then you are ready to flash the firmwares. It does not matter if your ION is on Gingerbread or Ice Cream Sandwich, the process of flashing remains the same. Flashing firmwares does not require Bootloader's to be Unlocked.
First and foremost you need to downlod the latest firmware for your Phone. So you head over to this site.
Firmware Links ( http://forum.xda-developers.com/showthread.php?t=1752345 )
After downloading the firmware, follow the Screen shot attachments with the steps below:
1. Start flashtool and click the lightening icon.
2 .Select Flash Mode.
3 .Select firmware to flash.
4. Click OK to start flash.
5. When the screen 5 pop's up, power down the phone. Press power + volume down button simultaneously. If the green led lights up, then the phone is in flash mode.
Flashtool will start flashing automatically. Once it is done flashing, it will show a message that the phone is disconnected.
Now detach the usb cable from the phone and press the power button to start the phone.
Click to expand...
Click to collapse
Proceed to POST#3 for ROOTING Steps

Rooting:
FOR LOCKED BOOT LOADERS
As per the developer of this method, it works only on ICS and JB.
To root the phone, first you need to download the rooting kit from here.
( http://forum.xda-developers.com/showthread.php?p=31545627#post31545627 )
At the time of writing, the latest version available is Version 15. ( http://ul.to/h44f6vni )
This is known to work well with Ion.
Also there is Version 13 which works well for me. ( http://www.mediafire.com/?1q4nt6b63ooaf1s )
Click to expand...
Click to collapse
This method of rooting requires the Backup & Restore utility to be installed on the phone. If it is not available by default, on your phone, download it from here. ( https://docs.google.com/file/d/0ByrrmqPijqISWElSQjV1aWVkMVk/edit?pli=1 ) and install it as a normal app.
Click to expand...
Click to collapse
Now on the phone, got to settings/developer options for ICS and enable USB debugging. Without this your phone will not be recognized by adb and you won't be able to root your phone.
Click to expand...
Click to collapse
Unzip the downloaded rooting kit to the place of your choice.
(Windows only) Connect the phone to the pc. Now navigate to the folder which contains the unzipped contents of the rooting kit. Click on the RunMe.bat. Now follow the instructions.
Click to expand...
Click to collapse
(Linux Only) I don't know if the Linux script in the latest version works or not. But it works in the the Version 13, which i have attached to this post. Open the terminal window and navigate to the folder where you have unzipped the rooting kit. Now type the following command and follow the instructions.
chmod +x runme.sh
sudo ./runme.sh
Click to expand...
Click to collapse
Click to expand...
Click to collapse
FOR UNLOCKED BOOT LOADERDS
Flash the stock kernel with Root + Cwm + Init.d support.
Download this kernel.elf and flash it using flashtool.
The Download links and Instructions are on the OP of THIS post.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
LINKS
Here is Captainkrtek's ADB GUIDE
Click to expand...
Click to collapse

very well put together guide. thx

now need root instructions for ICS

vladvertigo said:
now need root instructions for ICS
Click to expand...
Click to collapse
Rooting method of Xperia S works on our phone.
http://forum.xda-developers.com/showthread.php?t=1742992

This should go in a sticky as installing ice with LTE too many threads and right now.
Sent from my LT28at using xda premium

Updated Post 2 with rooting method for ICS.

I used this to root before you posted it but it slowed ICS down to point out was almost unusable. Any thoughts on why? Did I screw something up maybe?
Sent from my LT28h using xda premium

Recon Freak said:
I used this to root before you posted it but it slowed ICS down to point out was almost unusable. Any thoughts on why? Did I screw something up maybe?
Sent from my LT28h using xda premium
Click to expand...
Click to collapse
I followed the above instructions as it is. I had pre-rooted gingerbread.
ICS is pretty fast, not as fast as Gb, but no lags either.
May be some problem with the ICS Rom zip. Try downloading it again. None have reported this problem.

I'm running it now and it flies. But as soon as I root it happens. I tried it twice from stock ATT and generic .111.
Sent from my LT28h using xda premium

Am I reading wrong? But I currently have ICS. So do I need to like re flash gingerbread then go back to ICS?
Sent from my Sony Xperia Ion

wolf0491 said:
Am I reading wrong? But I currently have ICS. So do I need to like re flash gingerbread then go back to ICS?
Sent from my Sony Xperia Ion
Click to expand...
Click to collapse
I think You will need to. Both the batch files need to be executed, to be able to get root.

ganeshbiyer said:
I think You will need to. Both the batch files need to be executed, to be able to get root.
Click to expand...
Click to collapse
That's just annoying haha. I'll wait
Sent from my Sony Xperia Ion

So I want to make sure I have this straight!
I have a stock ATT Ion 2.3.7
3. Application Settings: [Unknown sources] checked {Allowed}
4. Application Settings: Development [USB debugging] checked {Allowed}
5. Run Step 1.bat
6. Install Ice Cream Sandwich without wiping anything.
(wipe data, wipe cache and wipe apps log are not selected).
Once flashing is done, start the phone manually. It does not reboot automatically.
7. Application Settings: [Unknown sources] checked {Allowed}
8. Application Settings: Development [USB debugging] checked {Allowed}
9. Run step 2.bat
And this will give me ROOTED ICS 4.0.4 with locked bootloader?
Then what do I flash to get my LTE radio back? Just the Stock ATT baseband?
Sorry for the noobish question, my Ion is less than a week old and I havent picked insurance through best buy yet so I don't want to brick before I insure it

vpllover said:
So I want to make sure I have this straight!
I have a stock ATT Ion 2.3.7
3. Application Settings: [Unknown sources] checked {Allowed}
4. Application Settings: Development [USB debugging] checked {Allowed}
5. Run Step 1.bat
6. Install Ice Cream Sandwich without wiping anything.
(wipe data, wipe cache and wipe apps log are not selected).
Once flashing is done, start the phone manually. It does not reboot automatically.
7. Application Settings: [Unknown sources] checked {Allowed}
8. Application Settings: Development [USB debugging] checked {Allowed}
9. Run step 2.bat
And this will give me ROOTED ICS 4.0.4 with locked bootloader?
Then what do I flash to get my LTE radio back? Just the Stock ATT baseband?
Sorry for the noobish question, my Ion is less than a week old and I havent picked insurance through best buy yet so I don't want to brick before I insure it
Click to expand...
Click to collapse
Download the stock GB AT&T, when flash de-select all wipes. Checked everything esle below that Except baseband.
Sent from my LT28h using Tapatalk 2

Thanks for the guide. I had to do it solo, You might want to add in to guide for the noobs how to get into flash mode.

Where is the att ftf files located? Just in case something goes wrong
Sent from my LT28at using XDA Premium App

erichall82 said:
Where is the att ftf files located? Just in case something goes wrong
Sent from my LT28at using XDA Premium App
Click to expand...
Click to collapse
Firmwares are stickied at the top of the ion General forum.

ganeshbiyer said:
Rooting method of Xperia S works on our phone.
http://forum.xda-developers.com/showthread.php?t=1742992
Click to expand...
Click to collapse
FYI - this does have CWM in it, but because it was designed for the Xperia S it doesn't work completely. If someone would be so kind to redesign the CWM in that file for us that would be awesome!

Files needed

hi all
i need two of below files as i have accidentally deleted FTFs of 4.4.2 and 4.4.3 and dont wona download whole 1+1 2 GB on my slow internet connection
1. kernal.sin from 4.4.2
2. kernal.sin from 4.4.3
those who dont know how to get this from FTF do follow below very easy steps
1. go to FTF folder
2. right click on ftf and select open with and select win rar
3. now you will see all the file inside
Note: to avoid confusion after each extract rename and give kernal(4.4.3 and 4.4.2) names
thank you
i am asking this to just root back
i had removed root to test all available root tools as well as exploits but sony did tough job with this and patched hard

here https://mega.co.nz/#!jZtl1SCQ!kGHRusA61LUY7n9gL0980ZDpv1jKz2U0bljeMoo66-w

Andrey Piekas said:
here https://mega.co.nz/#!jZtl1SCQ!kGHRusA61LUY7n9gL0980ZDpv1jKz2U0bljeMoo66-w
Click to expand...
Click to collapse
not able to access mega in my country even phone app is not responding could you please use google drive or dev host
thank
also please attach
loader.sin
meta-inf folder
for each one
thanks

chauhanjayc said:
hi all
i need two of below files as i have accidentally deleted FTFs of 4.4.2 and 4.4.3 and dont wona download whole 1+1 2 GB on my slow internet connection
1. kernal.sin from 4.4.2
2. kernal.sin from 4.4.3
those who dont know how to get this from FTF do follow below very easy steps
1. go to FTF folder
2. right click on ftf and select open with and select win rar
3. now you will see all the file inside
Note: to avoid confusion after each extract rename and give kernal(4.4.3 and 4.4.2) names
thank you
i am asking this to just root back
i had removed root to test all available root tools as well as exploits but sony did tough job with this and patched hard
Click to expand...
Click to collapse
Maybe this noob can help u sir

Thank a lot mr super noob

How do I get to root on my Xperia T3 D5106 ???

Friends, I'm there one week direct non-stop trying to root on my Sony Xperia T3 (D5106) 18.1.A.2.25 version, do not know what else to do, I've tried all the tutorials xda forum .. all give error .. when I give in flash D5103 model, error appears here, my T3 only works on the D5106 model .. How do I get to root on my Xperia T3 D5106 ??? For God's sake = ( :crying:

You can follow the tutorials found in other threads like http://forum.xda-developers.com/xperia-t3/help/how-to-root-xperia-t3-18-1-2-25-t3007487 or http://help.howproblemsolution.com/1377446/tutorial-root-xperia-t3-firmware-18-1-a-2-25 that show how to root a D5103. It works altough your phone will complain at startup that you have the wrong version (but it still works). To circunvent this you must flash an ftf file for the D5106. If you don´t find one you can generate your own ftf with flashtool, that should be installed in c:\flashtool.
1) start flashtool and go to Devices/Check Updates. Double click on D510X then click on D5106 tab. If you find the brand of your phone, double click it and flashtool will start downloading. If you don´t find your brand, you can add it to the list in flashtool\devices\D510X\D5106\custlist.properties. In my case I added 1 line with "1286-6141=AMERICAS-LTE" without the quotes. You find this information about your phone in C:\program data\Sony\Sony PC Companion\<youremei>\default-capability.xml , almost at the end under <filesystem> <productnumber> and <cdf> <productnumber>.
Save custlist.properties and you will see your brand in flashtool. Be patient waiting for download - it will bring almost 1 GB.
2) when download is finished, flashtool will automatically decrypt the filesets and open the "Bundler". There you should mark the whole folder list and move it to the right to the "firmware content". Now you can click on "create" and your ftf will be generated in the firmwares folder.
If the process ends successfully you will have generated an ftf and a torrent file.
Follow the steps in the tutorial to flash the .14 firmware, run the rootkit to root your device and use your generated ftf to flash the .25 firmware. Flash only the Kernel and unmark the wipe Data in flashtool.
I hope this helps, since it worked for me. happy flashing

Hey @low-rider, your method worked perfectly on my D5106 Thanks:good:

anyone can help me to root my xperia t3?

What model T3 do you have?

low-rider said:
You can follow the tutorials found in other threads like http://forum.xda-developers.com/xperia-t3/help/how-to-root-xperia-t3-18-1-2-25-t3007487 or http://help.howproblemsolution.com/1377446/tutorial-root-xperia-t3-firmware-18-1-a-2-25 that show how to root a D5103. It works altough your phone will complain at startup that you have the wrong version (but it still works). To circunvent this you must flash an ftf file for the D5106. If you don´t find one you can generate your own ftf with flashtool, that should be installed in c:\flashtool.
1) start flashtool and go to Devices/Check Updates. Double click on D510X then click on D5106 tab. If you find the brand of your phone, double click it and flashtool will start downloading. If you don´t find your brand, you can add it to the list in flashtool\devices\D510X\D5106\custlist.properties. In my case I added 1 line with "1286-6141=AMERICAS-LTE" without the quotes. You find this information about your phone in C:\program data\Sony\Sony PC Companion\<youremei>\default-capability.xml , almost at the end under <filesystem> <productnumber> and <cdf> <productnumber>.
Save custlist.properties and you will see your brand in flashtool. Be patient waiting for download - it will bring almost 1 GB.
2) when download is finished, flashtool will automatically decrypt the filesets and open the "Bundler". There you should mark the whole folder list and move it to the right to the "firmware content". Now you can click on "create" and your ftf will be generated in the firmwares folder.
If the process ends successfully you will have generated an ftf and a torrent file.
Follow the steps in the tutorial to flash the .14 firmware, run the rootkit to root your device and use your generated ftf to flash the .25 firmware. Flash only the Kernel and unmark the wipe Data in flashtool.
I hope this helps, since it worked for me. happy flashing
Click to expand...
Click to collapse
hello my friend,
i have de Xperia T3 D5106, and the last Flash tool. i don't kwon how creted the tft file.
Which folder files i have to move to the firmware content? to them Created,
Please help me

MDC413I said:
hello my friend,
i have de Xperia T3 D5106, and the last Flash tool. i don't kwon how creted the tft file.
Which folder files i have to move to the firmware content? to them Created,
Please help me
Click to expand...
Click to collapse
"C:\Users\(username)\.flashTool\firmwares"

Lollipop Vived mode

New thread opened with updated files plz visit below link
keep in mind using original settings i mean stock not settings given in flashable zip
http://forum.xda-developers.com/crossdevice-dev/sony/mod-xreality-supervivid-lollipop-t3117853

Getting force stopped man when trying to open display in setting
Plz give all the stock files to revert

(Req) I need sme folders from system/app
Iengine
Imageenchancer
Imageprocessorpermission
Intelligentbacklight
Intelligent rotation
Intelligent settings
Interface permissions
When Iam trying to port smartbacklight and smart rotation and smart call Iam getting bootloops so I deleted those files so pls send me above mentioned folders sme of them may not exist I think

pvnsai73 said:
(Req) I need sme folders from system/app
Iengine
Imageenchancer
Imageprocessorpermission
Intelligentbacklight
Intelligent rotation
Intelligent settings
Interface permissions
When Iam trying to port smartbacklight and smart rotation and smart call Iam getting bootloops so I deleted those files so pls send me above mentioned folders sme of them may not exist I think
Click to expand...
Click to collapse
only two of them exist those are related to image
i am sorry but non of above exist
and how come you getting force close i didnt had any issue with attached file for vivid

chauhanjayc said:
only two of them exist those are related to image
i am sorry but non of above exist
and how come you getting force close i didnt had any issue with attached file for vivid
Click to expand...
Click to collapse
Sry nw it works fine but "interface permissions" folder will be there bro in system/app

pvnsai73 said:
Sry nw it works fine but "interface permissions" folder will be there bro in system/app
Click to expand...
Click to collapse
here you go

Only Locked Bootloader or works in Unlocked Bootloader??

Didn't tested on ub
Can you test and update results

In my d5322 not working on unlocked bootloader... :'(

jacitdm said:
In my d5322 not working on unlocked bootloader... :'(
Click to expand...
Click to collapse
test it, works here http://forum.xda-developers.com/crossdevice-dev/sony/mod-xreality-supervivid-lollipop-t3117853

Thank you bro.. Its working super...

Do I need to root?
Do I need to unlock bootloader?.

Its working too for me but can't see any difference, I will try different angle... anyway thank you very much
Edit: Image enhancement working great, I see it now..... thanks again

vnnarendran said:
Do I need to root?
Do I need to unlock bootloader?.
Click to expand...
Click to collapse
yes...
no, not needed

Image enhancer.apk not install show error

Hi.. Could you make it flushable zip please

stuck at boot,followed procedures,what did I do wrong?Do i need to deodex my rom?Please help

video tutorial
if anyone want video tutoriial here it is
then just go to you tube and search for tech rajat and follow up the video in my channal

U are stuck in boot loop...
100% solution...
luckly we have a way to get out of it...
Dont worry. Just follow the following steps and your phone will shine like a new one...
The following procedure is fully trust worthy and not harmful. It is supported by sony itself.
Download the androxyde flashtool first..
From here...
https://userscloud.com/kb6tr3bcuecr?_e_pi_=7,PAGE_ID10,4795418019
Now download the official .ftf file for t2 ultra
The firmware is 5.0.2 lollipop sony official
(dont worry the file is fully official)
from here..
https://drive.google.com/file/d/0B1AAC4lt7nzONno1N09KRDNVSUk/view?usp=sharing
Now follow the following steps carefully...
1. Firstly force shut down your t2 ultra by pressing the soft key near the slot for sim card or by pressing the power and vol up button untill you feel vibr 3 times.
2. Install the flashtool.
Flashtool will automatically create few folders in c drive
3. Paste the downloaded ftf file into 'firmware' folder in c drive>>users>>(your user name)>>.flashtool>>firmware.
4. Open the flashtool and let the process complete.
(open 'flashtool x86')
5. Now minimise the flashtool and again go to the flashtool folder.
You will find a folder for 'flashtool drivers.'
run the containing file.
Now you need to install the drivers required for the process.
Select (check) drivers for 'fastboot,flashmode,xperia t2 ultra drivers'
Say 'install'
return back to flashtool...
5. Now while keeping vol up button of t2 ultra pressed connect the phone to computer using only the original sony usb data cable.
A green led will blink.
6. The flashtool will say 'device connected in flash mode'
7. Now click on 'black lightning thunder icon' on left top corner below 'file' section.
8. Say flashmode.
9. Now the flashtool will automatically detect the ftf file for t2 ultra. If not detected browse to the folder containing ftf file.
10. Now in the 'wipe' section in the right side of flashtool window 'check' all the options like wipe appslog, cache, data.
Now click on flash and stay calm till the process ends.
11. Now when the process ends the flashtool will say ' flash complet ' dont hurry!! Do not turn on your phone..
12. First disconnect your phone from pc. Do not close the flashtool.
And now again connect your phone to pc but this time while connecting your phone to pc keep volume 'down' button pressed. A blue led will glow.
13. Flashtool will say that 'device is connected in fastboot mode'.
14. Now again click on 'black thunder icon' but this time click on 'fastboot mode'
15. Number of options will appear. Select ''reboot to system''. And your phone will automatically turn on. Now unplug the cable and enjoy...
Sent from my D5322 using XDA Free mobile app