About a month ago I flashed to the newest version of "The Peoples Rom" with Ktoonsez kernel. I didn't like the kernel so I flashed the same zip but used the stock kernel. As soon as I came back online I was only getting 1x data. After playing around and basically did everything to re-flash the phone and after a few hours got 3g data working again. Now a week later the 3g has randomly dropped and I can not get it back.....
Has anyone had this problem??? I am going to try to flash a few different roms to see if I can get the 3g to stick on any of them.....
Update Profile and prl also Go into the phone dialer and enter the following code ##72786# this will do a hands of reactivation. TW Roms usually won't affect signal so flashing g another rom won't help.
Sent from the future via Xparent Green Tapatalk 2
edfunkycold said:
Update Profile and prl also Go into the phone dialer and enter the following code ##72786# this will do a hands of reactivation. TW Roms usually won't affect signal so flashing g another rom won't help.
Sent from the future via Xparent Green Tapatalk 2
Click to expand...
Click to collapse
Didn't work, all it did was reset my MDN and MSID and give me an error when I tried to activate
Edit: Silly question but do I need wifi on for it to work?
Ronhero said:
Didn't work, all it did was reset my MDN and MSID and give me an error when I tried to activate
Edit: Silly question but do I need wifi on for it to work?
Click to expand...
Click to collapse
Reset your mdn and msid? What are you saying? You are on Sprint right? You went into the dialer an entered the hands off network reactivation like I said. Then once it provisions again update profile and prl?
Sent from the future via Xparent Green Tapatalk 2
edfunkycold said:
Update Profile and prl also Go into the phone dialer and enter the following code ##72786# this will do a hands of reactivation. TW Roms usually won't affect signal so flashing g another rom won't help.
Sent from the future via Xparent Green Tapatalk 2
Click to expand...
Click to collapse
edfunkycold said:
Reset your mdn and msid? What are you saying? You are on Sprint right? You went into the dialer an entered the hands off network reactivation like I said. Then once it provisions again update profile and prl?
Sent from the future via Xparent Green Tapatalk 2
Click to expand...
Click to collapse
I am on boost mobile
I did what you said with wifi on and it didn't help I still have 1x
Wow thanks for saying your on Boost Mobile, don't you think that would have been important to put in the title or at least in the OP within your question?
Sent from the future via Xparent Green Tapatalk 2
edfunkycold said:
Wow thanks for saying your on Boost Mobile, don't you think that would have been important to put in the title or at least in the OP within your question?
Sent from the future via Xparent Green Tapatalk 2
Click to expand...
Click to collapse
I am sorry I thought I put flashed boost phone when I only put flashed phone. Sorry about that
Let me see if I can get someone who may know more in regards to boost.
Sent from the future via Xparent Green Tapatalk 2
edfunkycold said:
Let me see if I can get someone who may know more in regards to boost.
Sent from the future via Xparent Green Tapatalk 2
Click to expand...
Click to collapse
Thank you so much! I have flashed a few phones to boost, this is the first time I am totally stumped. Like I mentioned before I started having problems after a kernal flash from the peoples rom.
I havent used boost for awhile but right now I am on ting which is still a sprint network and for them and my previous runs with boost using hands free activation and updating prl/profile has always worked as expected. I would download the stock md4 rom from freeza and do the hands free activation ##72786# see if that works as expected. If you have data working you should be fine to back to tpr.
Sent from my SPH-L710 using Tapatalk 4
iamikon said:
I havent used boost for awhile but right now I am on ting which is still a sprint network and for them and my previous runs with boost using hands free activation and updating prl/profile has always worked as expected. I would download the stock md4 rom from freeza and do the hands free activation ##72786# see if that works as expected. If you have data working you should be fine to back to tpr.
Sent from my SPH-L710 using Tapatalk 4
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=40663535
I am having problems finding that exact build, will this work?
Ronhero said:
http://forum.xda-developers.com/showthread.php?p=40663535
I am having problems finding that exact build, will this work?
Click to expand...
Click to collapse
Thats the one.
Sent from my SPH-L710 using Tapatalk 4 Beta
iamikon said:
Thats the one.
Sent from my SPH-L710 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Ok I am downloading the zip / modem / kernel right now. I am going to install the zip "Odexed No Data Wipe Zip" that I am going to install from my custom recovery. Then use one click exe's for the modem and kernel. I will let you know what happens. Thanks a ton in advance.
Ronhero said:
Ok I am downloading the zip / modem / kernel right now. I am going to install the zip "Odexed No Data Wipe Zip" that I am going to install from my custom recovery. Then use one click exe's for the modem and kernel. I will let you know what happens. Thanks a ton in advance.
Click to expand...
Click to collapse
That did not work, I updated and now I can not write any profile settings or send the default password...
Ronhero said:
That did not work, I updated and now I can not write any profile settings or send the default password...
Click to expand...
Click to collapse
If you are on Boost Mobile as you stated before. First thing you should do is check out THIS THREAD. Then you can check out the post HERE in the same thread.
prboy1969 said:
If you are on Boost Mobile as you stated before. First thing you should do is check out THIS THREAD. Then you can check out the post HERE in the same thread.
Click to expand...
Click to collapse
I am familiar with that page, as I stated before it had 3g working for MONTHS and then it dropped out for no reason.... I have flashed back all the profile 0 information and did a profile update but still only get 1x....
The reason I linked the thread, is because the issue has been mentioned before in the thread. You may be able to get a resolution to the issue faster.
Related
Not sure if its already confirmed but I found that sprint and verizon roms work for us on tmobile
Sent using JellyBombed Tapatalk 2
Link?
Sent from my SGH-T889 using xda premium
Hoezack said:
Link?
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
Theres no link, I installed and tested myself. Im running JellyBombed now. After installing rom, install our modem and a tmobile kernel.good to go
Sent using JellyBombed Tapatalk 2
I tried all of the rooms and they don't work only att room and the international 7005 bit don't tried verison or sprint all of them include the radio so don't make a mistake and damage your phone
pegapega02 said:
I tried all of the rooms and they don't work only att room and the international 7005 bit don't tried verison or sprint all of them include the radio so don't make a mistake and damage your phone
Click to expand...
Click to collapse
Most custom ROM's are without radios. You can always pull the radio and edit the update script.
Sent from my SGH-T889 using XDA Premium HD app
Yes you can edit the update scrip tried a sprint room they have the radio the only ones that dont have it are the cm 10.1 but we have cm10.1 why should we flash a room that we alredy have and we dont have edit the update scrip well thats my opinion
pegapega02 said:
Yes you can edit the update scrip tried a sprint room they have the radio the only ones that dont have it are the cm 10.1 but we have cm10.1 why should we flash a room that we alredy have and we dont have edit the update scrip well thats my opinion
Click to expand...
Click to collapse
So you say we can't because you are lazy? If you want a sprint or Verizon rom you would be willing to remove the radio file and update the script (honestly 2 minutes of work).
I can confirm I had the 4.1 version of sprints PA ROM (was out before ours or ATT) working, I needed tmobile radio and kernel (took from early port of CM10) and needed an APN app to set APNS as settings APN selector force closed on me.
Sent from my SGH-T889 using Tapatalk 2
_Dennis_ said:
So you say we can't because you are lazy? If you want a sprint or Verizon rom you would be willing to remove the radio file and update the script (honestly 2 minutes of work).
I can confirm I had the 4.1 version of sprints PA ROM (was out before ours or ATT) working, I needed tmobile radio and kernel (took from early port of CM10) and needed an APN app to set APNS as settings APN selector force closed on me.
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
Where wpuld I find the radio files? I tried the popular roms on both verizon and spring and can confirm by simply flashing roms, modem and kernel for tmo I got them up and running, im trying to get jelly beans on verizon working now but I get no data. It says tmobile in the drop down, but data wont connect
Sent from my SCH-I605 using xda app-developers app
rambo8987 said:
Where wpuld I find the radio files? I tried the popular roms on both verizon and spring and can confirm by simply flashing roms, modem and kernel for tmo I got them up and running, im trying to get jelly beans on verizon working now but I get no data. It says tmobile in the drop down, but data wont connect
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
The radio you get from the development forum. you have a good radio if you get T-Mobile signal. Try downloading HiAPN Global or see if you can change the APNs in the settings menu, I would bet you the APN for T-Mobile is not there.
Delete
_Dennis_ said:
So you say we can't because you are lazy? If you want a sprint or Verizon rom you would be willing to remove the radio file and update the script (honestly 2 minutes of work).
I can confirm I had the 4.1 version of sprints PA ROM (was out before ours or ATT) working, I needed tmobile radio and kernel (took from early port of CM10) and needed an APN app to set APNS as settings APN selector force closed on me.
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
pegapega02 has been lazy about roms for what feels like eternity, I wouldn't sweat it.
A week ago I tested exactly what you mentioned here... a sprint rom with the tmobile radio. Worked like a champ. Ended up going back to Teshxx's deodexed t-mobile rob because at the end of the day, every single thing works right out of the box, including the themes I want to install on top.
How did you get around the APN force close issue?
mdt73 said:
pegapega02 has been lazy about roms for what feels like eternity, I wouldn't sweat it.
A week ago I tested exactly what you mentioned here... a sprint rom with the tmobile radio. Worked like a champ. Ended up going back to Teshxx's deodexed t-mobile rob because at the end of the day, every single thing works right out of the box, including the themes I want to install on top.
How did you get around the APN force close issue?
Click to expand...
Click to collapse
HIAPN global injects the apn, gets around the force closure.
Sent from my SGH-T889 using Tapatalk 2
ptfdmedic said:
...
Click to expand...
Click to collapse
I like your blog. (in your sig)
---------- Post added at 01:00 AM ---------- Previous post was at 12:58 AM ----------
pegapega02 said:
I tried all of the rooms and they don't work only att room and the international 7005 bit don't tried verison or sprint all of them include the radio so don't make a mistake and damage your phone
Click to expand...
Click to collapse
In case you need to keep an eye on the ROMs, here is an up-to-date list.
I bought my phone already flashed to Verizon prepaid. It is currently on ICS 4.0.4 rooted stock build FH13. The guy who flashed it sold it to me and told me to never update it cuz it could destroy the flash. Is this true? Also, hot spot is working and i wouldn't want to lose that if i were to update. So should i just disable OTA update notifications with FOTAkill.apk and stay on 4.0.4?
When you update just change the APN for MMS. The flash should stay regardless of the ROM on the phone. Be sure to do a nandroid first. Also someone who has done a flash to another carrier can please chime in
Sent from my SPH-L900 using Tapatalk 2
patrao_n said:
When you update just change the APN for MMS. The flash should stay regardless of the ROM on the phone. Be sure to do a nandroid first. Also someone who has done a flash to another carrier can please chime in
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
Your correct . You are good to go. The update won't hurt your Verizon prepaid flash. Just change APN and your set. I'm able to jump around ROMs with no problem at all. Happy flashing!
Sent from my SPH-D710 using xda premium
patrao_n said:
When you update just change the APN for MMS. The flash should stay regardless of the ROM on the phone. Be sure to do a nandroid first. Also someone who has done a flash to another carrier can please chime in
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
DO NOT UPGRADE! If you're on PagePlus, the system WILL NOT RECOGNIZE YOUR PHONE. The place you bought it will charge you to re-flash it back to 4.0.4.
Just curious but how will flashing a new ROM in Odin or cwm make the system not recognize the phone? From what I can tell the "flash" was using the numbers from a donor phone. All the info used in the flash except the APN would all still be there after a new ROM flash. Can you not factory reset the phone after a flash to page plus as well? I would like to know what your info is. Because this is the first I have heard it.
Sent from my SPH-L900 using Tapatalk 2
patrao_n said:
Just curious but how will flashing a new ROM in Odin or cwm make the system not recognize the phone? From what I can tell the "flash" was using the numbers from a donor phone. All the info used in the flash except the APN would all still be there after a new ROM flash. Can you not factory reset the phone after a flash to page plus as well? I would like to know what your info is. Because this is the first I have heard it.
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
I'm also curious about this as well. I have flashed many phones to various carriers and never had a problem with a upgrade.
Sent from my SPH-D710 using xda premium
Ok it looks like someone is saying it will be safe to update and someone else is saying that it is NOT safe to update. I cannot afford to lose the flash as I do not have access to a computer so I can't take the chance unless someone can absolutely positively for sure tell me that I will not lose my Verizon Prepaid flash.
If the Epic 4g Touch was made for Verizon I wouldnt be worried but being that its originally a Sprint phone I am having doubts. Isn't the OTA update designed for the Sprint Epic 4g Touch? If I do end up letting the OTA update install what version will I end up being on?
http://forum.xda-developers.com/showthread.php?t=2314541
These people have done it. Maybe ask in there or pm them. I am leaning towards operator error for the person saying don't do it.
Sent from my SPH-L900 using Tapatalk 2
hackaveli said:
Ok it looks like someone is saying it will be safe to update and someone else is saying that it is NOT safe to update. I cannot afford to lose the flash as I do not have access to a computer so I can't take the chance unless someone can absolutely positively for sure tell me that I will not lose my Verizon Prepaid flash.
If the Epic 4g Touch was made for Verizon I wouldnt be worried but being that its originally a Sprint phone I am having doubts. Isn't the OTA update designed for the Sprint Epic 4g Touch? If I do end up letting the OTA update install what version will I end up being on?
Click to expand...
Click to collapse
I use Verizon prepaid on my epic 4g and epic 4g touch. I have been able to Odin both phones and not loose any settings. I also was able to ota and install cwm and flash any cm10.1 build and everything worked. Text calls and 3g work. MMS doesnt work unless I change APN settings
Sent from my SPH-D710 using xda premium
beezie42 said:
I use Verizon prepaid on my epic 4g and epic 4g touch. I have been able to Odin both phones and not loose any settings. I also was able to ota and install cwm and flash any cm10.1 build and everything worked. Text calls and 3g work. MMS doesnt work unless I change APN settings
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
If I do the OTA update, what version will I be on? And will foxfi or SVPT work on it?
Beezie I tried following tutorials all over google on getting my mms to work, but I cant get it to work on my native/built-in messaging app... Only way I can get MMS messages is by using GO SMS PRO app. Can I screenshot you my ##DATA# settings and let me know if i need to change any anything?
hackaveli said:
If I do the OTA update, what version will I be on? And will foxfi or SVPT work on it?
Beezie I tried following tutorials all over google on getting my mms to work, but I cant get it to work on my native/built-in messaging app... Only way I can get MMS messages is by using GO SMS PRO app. Can I screenshot you my ##DATA# settings and let me know if i need to change any anything?
Click to expand...
Click to collapse
Well the update depends on which brand epic touch your on. (Sprint, Virgin Mobile, Boost) it will update you too jellybean either way just your modem will be different. I have a sprint brand.
Ya it is a pain to get MMS to work threw touchwiz without a 3rd party app of some sorts. I find it pretty easy on CM builds. I normally just ditch MMS and send the pic threw gmail cuz its less of a headache. But sure you can send me a screenshot of the settings. I'm willing to help as much as I can.
Sent from my SPH-D710 using xda premium
beezie42 said:
Well the update depends on which brand epic touch your on. (Sprint, Virgin Mobile, Boost) it will update you too jellybean either way just your modem will be different. I have a sprint brand.
Ya it is a pain to get MMS to work threw touchwiz without a 3rd party app of some sorts. I find it pretty easy on CM builds. I normally just ditch MMS and send the pic threw gmail cuz its less of a headache. But sure you can send me a screenshot of the settings. I'm willing to help as much as I can.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I'm on a sprint epic 4g touch. Do you know what version it will update to?
hackaveli said:
I'm on a sprint epic 4g touch. Do you know what version it will update to?
Click to expand...
Click to collapse
Gb27 jellybean 4.1.2.
Sent from my SPH-D710 using xda premium
Okay three screenshots attached to this message. Thanks beezie
Interesting. I have the same settings saved on my computer for when I had touchwiz... This is what I was saying with having to use a 3rd party app and the headaches.
Have you considered jumping over to a cm10.1 build? MMS used to be a big issue for me until I realized what a pain it can be from phone to phone to upgrade etc. I'll flash over to stock tomarow after work and let you know if I can get it working right again. Sorry I can't be of more further help.
Sent from my SPH-D710 using xda premium
Im actually scared to flash my rom as i dont have access to a computer if it bricks. But i might if someone were to guarantee i wont lose root or flash AND i will still have wifi tethering capability. Im gonna do some research on the cm10.1 rom. Yea id appreciate it if you could help me out tomorrow. Thanks again man. Btw, does you're phone go into airplane mode every now n then? Mine does for about ten seconds then comes back on. It'll happen like maybe five times a day. Was wondering if that's normal. If not, is it something cm10.1 could fix?
Its not normal. There was a bunch of bugs in the ROM you are on. Being on that build though because its rooted you can use mobile Odin. To get the modem you would need to flash that in cwm though.
Sent from my SPH-L900 using Tapatalk 2
patrao_n said:
Its not normal. There was a bunch of bugs in the ROM you are on. Being on that build though because its rooted you can use mobile Odin. To get the modem you would need to flash that in cwm though.
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
Yup patroa is correct. ICS builds for the epic touch were horrible. (In My Opinion) I wish I could give you a 100% guarantee that nothing could go wrong but there is always a small slight chance.
No its not normal for airplane mode to pop on from time to time.
I rooted and used mobile Odin to install a cwm and flashed a cm10.1 build all without a volume down button (can't easily get into download mode or at all) I was able to do it from a ICS build. The same build you are on.
Sent from my SPH-D710 using xda premium
beezie42 said:
Yup patroa is correct. ICS builds for the epic touch were horrible. (In My Opinion) I wish I could give you a 100% guarantee that nothing could go wrong but there is always a small slight chance.
No its not normal for airplane mode to pop on from time to time.
I rooted and used mobile Odin to install a cwm and flashed a cm10.1 build all without a volume down button (can't easily get into download mode or at all) I was able to do it from a ICS build. The same build you are on.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
What would you say the odds are of something going wrong? Like if you were to compare the amount of horror stories to the amount of success stories what the ratio look like? One bad scenario to one hundred successful ones?
hackaveli said:
What would you say the odds are of something going wrong? Like if you were to compare the amount of horror stories to the amount of success stories what the ratio look like? One bad scenario to one hundred successful ones?
Click to expand...
Click to collapse
Just follow directions to the letter. Almost all if not all issues in flashing ROMs are from not following directions close enough. You are already rooted so get mobile Odin from play store or here on xda download el26 or el29 kernel from the kernel repository DL the tar file flash in mobile Odin boot into recovery make backup wipe and flash the ROM of your choosing. There is a ton of awesome ones out there
Sent from my SPH-D710 using xda app-developers app
So since the sense 5 roms is compatiable with us s3s i thought i could flash a att galaxy s3 rom and it booted and i had signal bars but no 3g i restarted and no siganl at all searching for signal. Does anybody know how to fix this? It doesnt show my phone number just imei.
EDIT: Fixed my problem. Had to reset my network settings by dialing ##72786# on a stock sprint rom. The phone restarted and everything came back.
Radios don't work on it yet
Sent from my SPH-L710 using xda app-developers app
Read OP in Development please.
Ok so just because the sense5 rom with no radios is flashable across different platforms you ASSUMED that you could just flash any ATT rom on your Sprint phone?
Edit: on your Pageplus phone?
Sent from the future via Tapatalk 4
edfunkycold said:
Ok so just because the sense5 rom with no radios is flashable across different platforms you ASSUMED that you could just flash any ATT rom on your Sprint phone?
Edit: on your Pageplus phone?
Sent from the future via Tapatalk reasonson why
Click to expand...
Click to collapse
Ha ha ASSUME very funny. You acting like you never made a mistake before. Yes my sprint phone on Verizon prepaid really not the pages plus one but it's the closest thing to it. But I fixed my problem and learn from you mistake. I just had to reset my network settings. The only reason I posted in flashing the phone to Page plus thread is because maybe he have had the searching for service problem before and could give me some information about what I could try. Like try to reset my phone networking but I found out how to do that.
Your signature says your provider is Pageplus that's where I got it, not from what thread you posted. Glad you got it fixed.
Sent from the future via Tapatalk 4
edfunkycold said:
Your signature says your provider is Pageplus that's where I got it, not from what thread you posted. Glad you got it fixed.
Sent from the future via Tapatalk 4
Click to expand...
Click to collapse
Yea I know Verizon prepaid isn't on the list.
I'm sure this question has been answered b4 and I'm sorry. So just hear me out. I've had problems over the past week with getting my phone to receive SMS and calls. I can make calls but I'm not able to receive them. I was on the phone with the sprint the other night and they were doing all these things to try and fix it. They had me do dial pad codes and my phone did not respond to those. They had me send some SMS messages to myself the text went through but didn't go back to my phone. And when I reflashed the modem and rom on Sunday afternoon I lost 3g I used to get almost 5-6 bars in my house on 3g and now I barely get 1 bar. I am on Stock Gb27 rooted stock kernel but I was on agats Gb27. I need help I would like to avoid getting a new phone. Thank you in advanced
Sent from my SPH-D710 using xda premium
Jared King said:
I'm sure this question has been answered b4 and I'm sorry. So just hear me out. I've had problems over the past week with getting my phone to receive SMS and calls. I can make calls but I'm not able to receive them. I was on the phone with the sprint the other night and they were doing all these things to try and fix it. They had me do dial pad codes and my phone did not respond to those. They had me send some SMS messages to myself the text went through but didn't go back to my phone. And when I reflashed the modem and rom on Sunday afternoon I lost 3g I used to get almost 5-6 bars in my house on 3g and now I barely get 1 bar. I am on Stock Gb27 rooted stock kernel but I was on agats Gb27. I need help I would like to avoid getting a new phone. Thank you in advanced
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
When you went back to stock did you update you're pro and profile...and what modem did you flash..
Gil81 said:
When you went back to stock did you update you're pro and profile...and what modem did you flash..
Click to expand...
Click to collapse
Well I was already on Stock Rooted GB27 and was having problems so I tried to Odin GB27 to fix it and factory reset through stock recovery and then update the prl and profile but that didn't fix it. And I've tried reflashing GB27 modem but that doesn't work either.
Sent from my SPH-D710 using xda premium
Jared King said:
Well I was already on Stock Rooted GB27 and was having problems so I tried to Odin GB27 to fix it and factory reset through stock recovery and then update the prl and profile but that didn't fix it. And I've tried reflashing GB27 modem but that doesn't work either.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
The signal issue is a funny thing to work out...I would try going back to stock ICS and ICS modem...before that you should make sure no tower work is going on in you're area.. ..if you go to ICS update prl/profile .... Check signal...then proceed to gb27.....rom and modem or another job modem...just my thoughts...let me know how it goes..
K thanks man! I will do that but it won't be till later tonight. I probably won't be able to Post results till tomorrow afternoon.
Sent from my SPH-D710 using xda premium
Zo i did what you said. I'm currently on fl24 and am still having problems. Wtf is going on. Sorry this is pissing me off now. I did prl and all that in ics and it hasn't done anything
Sent from my SPH-D710 using xda premium
I'm getting a new E4GT
Sent from my SPH-D710 using xda premium
Gil81 said:
The signal issue is a funny thing to work out...I would try going back to stock ICS and ICS modem...before that you should make sure no tower work is going on in you're area.. ..if you go to ICS update prl/profile .... Check signal...then proceed to gb27.....rom and modem or another job modem...just my thoughts...let me know how it goes..
Click to expand...
Click to collapse
So I did what you said. It only fixed it for a day. Only ##722136# works in Gb27 dialer. Before it didn't. Would I be able to install ICS dialer apk and not mess up the JB dialer. I might have to get a new phone if it keeps this up and if I do which phone should I get.
Sent from my SPH-D710 using xda premium
Jared King said:
So I did what you said. It only fixed it for a day. Only ##722136# works in Gb27 dialer. Before it didn't. Would I be able to install ICS dialer apk and not mess up the JB dialer. I might have to get a new phone if it keeps this up and if I do which phone should I get.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
i dont think the ics dialer idea would work...you can keep trying different modems and see what happens or tell sprint that they suck and demand an airave..they will probaly charge you for it..
As for which phone to get...there is no way for me to answer that man...But i'll tell you this. When i get my next phone it will be the water/dust resistent S4..But i dont see a new phone helping the signal..
You could change you're prl to a roaming one..there are guides here and there online..But this only works for sprint not boost..If you're on sprint..a custom prl would be my move..
Gil81 said:
i dont think the ics dialer idea would work...you can keep trying different modems and see what happens or tell sprint that they suck and demand an airave..they will probaly charge you for it..
As for which phone to get...there is no way for me to answer that man...But i'll tell you this. When i get my next phone it will be the water/dust resistent S4..But i dont see a new phone helping the signal..
You could change you're prl to a roaming one..there are guides here and there online..But this only works for sprint not boost..If you're on sprint..a custom prl would be my move..
Click to expand...
Click to collapse
Signal isn't the problem. I have 2 sprint towers in my area closest one is 1/4-1/2 mile down the road from my house.
Sent from my SPH-D710 using xda premium
Oh yeah and I am on sprint
Sent from my SPH-D710 using xda premium
Jared King said:
Oh yeah and I am on sprint
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
well..then before you go flashing a custom prl and having sprint freak if you use to much roaming data..lol
I would odin a one-click back to stock rooted ics...you might have something left over from rom flashes messing with you're signal. Make sure you back everything up on you're pc...because you need to use the wipe data one-click..i think its called ''no data''. I'll look to make sure.
edit..nope. Its full restore...not nodata..im a dummy..
Gil81 said:
well..then before you go flashing a custom prl and having sprint freak if you use to much roaming data..lol
I would odin a one-click back to stock rooted ics...you might have something left over from rom flashes messing with you're signal. Make sure you back everything up on you're pc...because you need to use the wipe data one-click..i think its called ''no data''. I'll look to make sure.
edit..nope. Its full restore...not nodata..im a dummy..
Click to expand...
Click to collapse
Ya know I'm not trying to annoy you dude. But screw it I'll just use a different app for SMS for now. I'm just gonna save up for a new phone. And get a job at the sprint store right by my highschool lol. Employees get new phones for free.
Sent from my SPH-D710 using xda premium
Jared King said:
Ya know I'm not trying to annoy you dude. But screw it I'll just use a different app for SMS for now. I'm just gonna save up for a new phone. And get a job at the sprint store right by my highschool lol. Employees get new phones for free.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
lol..im not annoyed...hope you get it worked out...
Sorry..i seen you have signal now..ive been jumping around and helping others in about 3 different forums. If you're problem is just sms or mms. I would wipe the cache for the sms app in app manager. Then boot to recovery and wipe cache and dalvik cache.Reboot. If it is still wonky..try checking you're apn settings..if they are wrong.change them and reboot.
Should I just look online to see if they're wrong.
Sent from my SPH-D710 using xda premium
Ok guys and gals, here we go again. This is a stock, deodexed, version of the latest OTA MG2 build for Boost/VM variants of the Samsung Galaxy S III, with SuperSU and Busybox installed. Apks are also zipaligned. This will not install a modem and should not wipe your device. This was built from the Samsung Official MG2 build tar.
The reason I say for both variants is because as far as I can tell, this update is a “generic” update. What I mean is that whatever carrier you are on, it will update your phone and not change any of your carrier’s settings, ie, mmsc url, carrier banner, etc.
Thanks:
Google and XDA, for obvious reasons
Kennyglass123 - For posting guidance and all the awesome moderating he does around town
Stryke_the_Orc - For believing in me, for being a great friend and mentor, and always pushing me to do more
Garwynn – Without you showing me how to “catch” this, I would have never had the tar to build the zip from. Thanks for all your help and support.
Remotehugger – For being patient as I built this. I know you’ve been dying to test drive it!
If I have forgotten someone, please, please, let me know. I am all for giving credit where it is due.
Disclaimer: I am not responsible for whatever you do with your phone. Please flash at your own risk
Download Link:
http://www.androidfilehost.com/?fid=23212708291678176
Md5: d813784d8ce01c45a9870bc9981445ef
Flashing Instructions:
This will NOT flash a modem. If you are coming from stock MD7, you will keep MD7. Same goes for whatever baseband you have right now!
1. Download zip to your sdcard
2. Reboot into CWM, TWRP, or other compatible recovery (I recommend CWM 6.0.3.1 Touch)
3. Wipe Data, Cache, Dalvik(might be able to flash dirty if coming from stock TW, try at your own risk)
4. Flash zip
5. Reboot
6. Profit
Issues:
Not an issue per se, since Sprint hasn't updated to MG2, but for some reason, flashing this to Sprint, even with the modem, is causing data issues. Might be an apn/mmsc issue, but I don't have Sprint, so I can't confirm. If someone with Sprint figures this out, please post it for all to know
Note:
As I said before, this will NOT install a modem. Until we get some modem zips, the only way that I have found to get the modem I want is to flash the OTA tar, to get the modem, then whatever zip rom I want(if that makes sense).
Downloading now !!!!!!! now i will stop getting those pesky push notifications that a firmware update is available - lol - thank you tons jd - so very much appreciated -
Thanks for the hard work! Is there anyway someone can post an up to date modem that i can flash. For some reason I am not getting data.
Is this jb4.1.2 still or 4.2 yet?
neemot said:
Thanks for the hard work! Is there anyway someone can post an up to date modem that i can flash. For some reason I am not getting data.
Click to expand...
Click to collapse
Update your profile. If that doesn't work there is a thread with all of the Sprint modems in the this section. I
Sprint Modem thread. This will give you the tools you'll need to flash the modem and also revert back if needed.
http://forum.xda-developers.com/showthread.php?t=1787677
tofumonster said:
Is this jb4.1.2 still or 4.2 yet?
Click to expand...
Click to collapse
Still 4.1.2 unfortunately.
Sent from my SPH-L710 using Tapatalk
ghostzyden said:
Still 4.1.2 unfortunately.
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
So what would be the advantage over L710VPBMD4?
neemot said:
Thanks for the hard work! Is there anyway someone can post an up to date modem that i can flash. For some reason I am not getting data.
Click to expand...
Click to collapse
Here you go. I dropped these last night. Enjoy
http://forum.xda-developers.com/showthread.php?p=47569788
Sent from my SPH-L710 using XDA Premium 4 mobile app
tempests said:
So what would be the advantage over L710VPBMD4?
Click to expand...
Click to collapse
I'm on Boost, and therefore have MD7, which is Boost and vm version of MD4. And I haven't noticed any real differences, except a few app updates. Sprint has not updated to MG2, only Boost and VM that I'm aware of. However, I have a theory I'd like a Sprint user to give me feedback on. If a Sprint user flashed this, please tell me what your dropdown banner and network(settings/about device/status)reads. Also, please verify mms works sending and receiving. Thanks! And enjoy. And look at the post above for the modem for this. I'll add it to the OP later.
Sent from my SPH-L710 using XDA Premium 4 mobile app
jdsingle76 said:
I'm on Boost, and therefore have MD7, which is Boost and vm version of MD4. And I haven't noticed any real differences, except a few app updates. Sprint has not updated to MG2, only Boost and VM that I'm aware of. However, I have a theory I'd like a Sprint user to give me feedback on. If a Sprint user flashed this, please tell me what your dropdown banner and network(settings/about device/status)reads. Also, please verify mms works sending and receiving. Thanks! And enjoy. And look at the post above for the modem for this. I'll add it to the OP later.
Sent from my SPH-L710 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi there - I'm on Sprint. I flashed your rom but unfortunately I can't get very far. I am not able to get data either with the MD4 modem or the MG2 modem. Rom will only work on wifi.
nyfl2004 said:
Hi there - I'm on Sprint. I flashed your rom but unfortunately I can't get very far. I am not able to get data either with the MD4 modem or the MG2 modem. Rom will only work on wifi.
Click to expand...
Click to collapse
Hmmm, that's interesting. So even flashing my MG2 rom, you're unable to get any data? I would think that it would be the same concept as me(being on Boost), flashing a Sprint ROM...have you checked your apn and mmsc settings? They may be causing the issue. I may change the heading to just Boost/VM then, if that's the case. Thanks for the information.
Edit: Did the banner stay Sprint?
jdsingle76 said:
Hmmm, that's interesting. So even flashing my MG2 rom, you're unable to get any data? I would think that it would be the same concept as me(being on Boost), flashing a Sprint ROM...have you checked your apn and mmsc settings? They may be causing the issue. I may change the heading to just Boost/VM then, if that's the case. Thanks for the information.
Edit: Did the banner stay Sprint?
Click to expand...
Click to collapse
You're welcome. I'm currently at work, so I don't have any wi-fi. I should be home in about 2 hrs. I will check all settings and the banner and report back. Thanks
nyfl2004 said:
You're welcome. I'm currently at work, so I don't have any wi-fi. I should be home in about 2 hrs. I will check all settings and the banner and report back. Thanks
Click to expand...
Click to collapse
Shouldn't need anything at all to check that. I meant just the pulldown notification bar(should read Sprint), and in settings/about device/status, what does the network say....and I'm sure you know, but if you change your mmsc/apn settings, you'll need your MSL. Good luck, and thanks again for the info.
For those of you reading this and have a phone with the newest Boost MG2 update then you will need to call Boost to get your MSL. No way to get it with the old methods. Trust me, I've tried. LOL.
They'll give it to you easily enough. I had mine 10 seconds after telling them I wanted it.
Sent from my SPH-L710 using Xparent Purple Tapatalk 2
jdsingle76 said:
Shouldn't need anything at all to check that. I meant just the pulldown notification bar(should read Sprint), and in settings/about device/status, what does the network say....and I'm sure you know, but if you change your mmsc/apn settings, you'll need your MSL. Good luck, and thanks again for the info.
Click to expand...
Click to collapse
I had to end up flashing back to LJ7 when I first got my phone, then do the six zeros in the terminal emulator trick, lol. Real pain in the butt, but got it. Thanks for passing this info on though :thumbup:
Sent from my SPH-L710 using xda app-developers app
wetbiker7 said:
For those of you reading this and have a phone with the newest Boost MG2 update then you will need to call Boost to get your MSL. No way to get it with the old methods. Trust me, I've tried. LOL.
They'll give it to you easily enough. I had mine 10 seconds after telling them I wanted it.
Sent from my SPH-L710 using Xparent Purple Tapatalk 2
Click to expand...
Click to collapse
The above message should be for you! Stupid app, lol!
Sent from my SPH-L710 using xda app-developers app
jdsingle76 said:
The above message should be for you! Stupid app, lol!
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
I had to have my MSL to use the Prl Write feature. You don't need your MSL to change your APNs. All I do to change mine is flash a Boost xml with the APN Backup and Restore app.
As for the LJ7 modem, I'm running it now. I've spoke with several of us Boost guys and we're all getting better reception with the older modem. So much for newer being better.
Sent from my SPH-L710 using Xparent Purple Tapatalk 2
wetbiker7 said:
I had to have my MSL to use the Prl Write feature. You don't need your MSL to change your APNs. All I do to change mine is flash a Boost xml with the APN Backup and Restore app.
As for the LJ7 modem, I'm running it now. I've spoke with several of us Boost guys and we're all getting better reception with the older modem. So much for newer being better.
Sent from my SPH-L710 using Xparent Purple Tapatalk 2
Click to expand...
Click to collapse
Have you tried my MG2 modem zip?
Sent from my SPH-L710 using XDA Premium 4 mobile app
jdsingle76 said:
Have you tried my MG2 modem zip?
Sent from my SPH-L710 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No. Thankfully I kept my backup. I just use the restoremodem.zip to restore my backup of MG2.
If I decide to switch back I'll give it a try. Going to stay with Lj7 right now since I'm getting better signal.
Sent from my SPH-L710 using Xparent Purple Tapatalk 2
wetbiker7 said:
No. Thankfully I kept my backup. I just use the restoremodem.zip to restore my backup of MG2.
If you decide to switch back I'll give it a try. Going to stay with Lj7 right now since I'm getting better signal.
Sent from my SPH-L710 using Xparent Purple Tapatalk 2
Click to expand...
Click to collapse
Fair enough. What rom are you running?
Sent from my SPH-L710 using XDA Premium 4 mobile app