Related
Hello,
I need some help. Install its Android OS, but after he reset my Kaiser again charged WinMo OS. My question is whether it is possible to choose which OS to load first or with any program or edit the file to indicate to launch the first Android.
Sorry for my bad english :S Use Google translator
If you have installed Android to SD card and use Haret.exe then it will always reboot to WM.
You must install to nand if you wish to boot to Android only, which will wipe WM totally and replace it with Android.
The guide stickied at the top of the forum is a good tutorial in doing this
That does bring a good point to my mind though, we could create an exe that loads at startup of wm to auto load haret and startup if the user doesn't cancel in so many seconds (like grub). I keep WM on my phone so I can easily change my droid version and also I know everything works including opening office files (actually that's the biggest sticking point for me keeping it).
Thanks for support. Today I try to flash via NAND method.
Kind Regards
Lybomir
I flash my Kaiser with latest zImage-2.6.32-froyo-09-09-10_21 from here http://it029000.massey.ac.nz/vogue/files/?C=M;O=D and my device loading Android OS very slow, and big problem is : Phone go in screensaver and I try to unlock and screeen stay only in white light, no picture, no widgets... total block. Only solution is it a use Soft reset button or remove batery
Maybe you choose the wrong panel type?
I can read in your signature Duo Boot so I guess you installed onto the SD and use Haret to run Android.
If so, you have to edit the default.txt file locate in ANDBOOT folder and modify the value following htckaiser.panel_type.
You can specify 1, 2 or 3 (most Kaisers use panel type 2)
Wrong panel type may lead to awake problems or wrong colors...
The excessive slowness may be due to a slow SD. Which class is it? Use at least class 4 SD.
---- EDIT -----
In case you already flashed to NAND, to change the panel type you have to choose the right kernel (the kaisimg file) or you can edit the one you flashed following instructions and links you can find in #4 at http://forum.xda-developers.com/showthread.php?t=680518
obviously you have to reflash the kaisimg.nbh but you don't need to flash Android again
I try with 1,2 and 3 but every time show me a this problem, and now i run HaRET and in 2 from 3 times phone block and not response only Soft reset work, and if case phone load complete Android and again in screen seaver system not respond... ;(
I flash my phone with ext2 partition on my sd card/ class 4 8 GB SDHC/ and try with system and data on sdcard an again freez white screen/
Sorry for my bad english
dlink.bg said:
I try with 1,2 and 3 but every time show me a this problem, and now i run HaRET and in 2 from 3 times phone block and not response only Soft reset work, and if case phone load complete Android and again in screen seaver system not respond... ;(
I flash my phone with ext2 partition on my sd card/ class 4 8 GB SDHC/ and try with system and data on sdcard an again freez white screen/
Sorry for my bad english
Click to expand...
Click to collapse
May you try to install a different build and see if you fall into the same problem?
BTW, just after installing, don't start playing soon with the device: initially skip all settings (touch the android, don't set google account and so on) and leave the phone quiet for at least 10-15 minutes: some builds need to copy file to the cache and playing with the device may interfere with this operation leading to unpredictable effects...
Let we know...
It is slow because you installed it on sdcard.. both partition.. if you are on nand. Try install both partition on nand partition.. and try hawks soad rls 3 as me.. its fastest build for kaiser.. and I haven't ever problem with white screen ata awake.. try it in that haws soad ion build.. you can finf it in that forun.. just find it
Sent from my HTC Kaiser Ion using XDA App
I find a solution! Later I post how find solution
Thanks on every in this thread to help me!
dlink.bg said:
I find a solution! Later I post how find solution
Thanks on every in this thread to help me!
Click to expand...
Click to collapse
You're welcome
And I'm waiting to know
Don't suppose any of you have actually seen this thread?
Gen.Y DualBOOT v1.0.6.0
Should work fine on Kaiser, certainly works fine on other devices, such as Diamond, Blackstone etc
zenity said:
Don't suppose any of you have actually seen this thread?
Gen.Y DualBOOT v1.0.6.0
Should work fine on Kaiser, certainly works fine on other devices, such as Diamond, Blackstone etc
Click to expand...
Click to collapse
Hi Zenity... Yes, know that piece of software.
But as You have to boot WinMo (Yes, I Know, not all the services need to be running but system must be loaded and started, GUI must be running and so on) in order to DualBOOT can start, I can guess it's only a partial time-save... isn't it? Did You tried it?
Have not tried it on my Kaiser, since it is Nand flashed, but I think it is what was being asked for really, a way to boot either WM, or straight into Android on SD.
I don't think it will ever be possible for both WM and Android to co-exist on nand, since there simply is not enough room on the internal memory for both.
It is a time saver on other devices I have tried it on, Diamond, Blackstone, however since neither of these devices is nand-flashable this is more what Gen-Y's dual boot was intended for.
If it was possible to run WM from SD then we might be able to truly Dual Boot, in a similar fashion to Windows/Linux on PC, but as far as I know this is not possible either.
zenity said:
Have not tried it on my Kaiser, since it is Nand flashed, but I think it is what was being asked for really, a way to boot either WM, or straight into Android on SD.
I don't think it will ever be possible for both WM and Android to co-exist on nand, since there simply is not enough room on the internal memory for both.
It is a time saver on other devices I have tried it on, Diamond, Blackstone, however since neither of these devices is nand-flashable this is more what Gen-Y's dual boot was intended for.
If it was possible to run WM from SD then we might be able to truly Dual Boot, in a similar fashion to Windows/Linux on PC, but as far as I know this is not possible either.
Click to expand...
Click to collapse
Yes, of course we haven't enough NAND to have both OSes!!!
What I was thinking to (but I'm a lot far to inspect WinMo booting sequence...) is if may be possible to wedge a sort of bootloader running BEFORE the OS loads or in the early booting process and letting we choose to boot WinMo (in NAND) of Android (on SD).
At present moment I've Android running from SD but kernel NANDed (I've got problems running out of NAND and no time to solve them so I'm using the solid build previously installed on SD) so Kaiser boots quickly... and this confirms it's possible boot SD Android without having to load WinMo or Haret. The more relevant matter I can see is that we have to find a way to wedge the bootloader without have to manual modify the WinMo ROM (virtualization is far from be considered on such devices...)
I suppose this is just a "mind exercise" (Sorry, I don't know how to correctly translate an Italian common saying...
Mind exercise describes it perfectly
Not sure why you would run out of space on nand, unless you are loading a lot of apps, and there are ways to run android that may help with that, such as apps2sd, or data on SD partition.
If you must have WM then your only choice would be using Haret.exe, and the most efficient way to dual boot we have at the moment is the Gen-Y solution, which is not ideal, but does offer at least part of what you seek.
The Android bootloader we use (tinboot.s) is not flexible enough to allow dual booting, but may have some information that may be of some use in this
tinboot thread
See what you think anyway
Sorry, I was not able to be clear... I apologize for my English...
When I said "I've got problems running out of NAND" I intended to say "I've got problems - very bad performances - when Android was running from NAND"!!!
Maybe we are a bit OT...
BTW, I was far from software developing for a long while and never developed low level software for Linux/Unix... but in the past I messed up with Z80, 65xx, 68K and x86 platforms's assembly
Recently I need to approach software developing again (but at a really different level...)
I'd like to have spare time to start again, as this world attracts me more. Maybe I'll give it a chance...
Let me understand... tinboot is actually used bootloader?
BTW, just to be clear... I don't need WinMo and I'm giving Android a chance to revive my Kaiser. I'm looking for a fast and stable build and actually I'm running VaniljEclair RLS11 (Yes, I know, I'd try your Polymod 2.1D build... )
Tinboot is the bootloader we use to get android in nand, not being a coder my understanding in limited, however I did think that thread may have useful information for anyone interested in the low level workings of out devices.
I assumed you meant running out of space on nand, lol, i see now what you mean, no need to apologise for you english, it's fine
zenity said:
--- CUT ----
however I did think that thread may have useful information for anyone interested in the low level workings of out devices.
Click to expand...
Click to collapse
And you're right... it's a useful starting point and I'll read it accurately...
Unluckly, I need a lot of spare time (and I don't, at present) to build a solid knowledge base and to start developing for Android.
yes there should be plenty of room for both oses on Nand, I still have over 90 mb on my wm6.5 nand install with come extra apps in there. So if you stripped down both oses you could easily fit them both on nand and still some space left. But then you need to have a boot loader that will be able to load both oses. I think I heard someone say somewhere they are using grub to boot android from nand, that can boot windows also with the right configuration, that would be where to start.
credits
- almar (Marc)
- bsbsbs (Sándor)
- Egon
- phj (János)
- Voyteckst
- frenkie9999999
- spiderman1961
- kukafei
- linuxsight
- glimmling
- MinL
-Antoxa1998
thanks to all the above the dream of runing android on i8000 came true. and because of their job we were expecting faster and faster, more and more efficient and smooth versions.
i followed their path. got a version, modified it, combined the best parts of each ROM and i am offering a new ROM much closer to be complete and less beta.
DETAILS ABOUT THE ROM
It is not based on frenkiedroid as far as i know but followed other path onto chinese ROMS. I think it is faster than any other ROM (tell me if not). It has achived score 1035 on antutu on my class 10 sd card (this is almost the speed of a native android phone using cm6 and this fast hardware)
According to measuments made using Benchmark & Tuning it is up to 56% faster compared to the already fast frenkiedroid
Tested
bluetooth
wi-fi
3g
calling
sms
radio
gps
usb connection
battery lasts up to 2 days
Changelog
Version 8
Information, installation instructions and photos below (post no34)
http://forum.xda-developers.com/showpost.php?p=50188850&postcount=34
Alternative download of cm6new v8 with 2.6.32.9 kexec kernel
Download from here
Information, installation instructions and photos below (post no35)
http://forum.xda-developers.com/showpost.php?p=57062016&postcount=35
Version 7
Information, installation instructions and photos below (post no33)
http://forum.xda-developers.com/showpost.php?p=50188850&postcount=33
Version 6
Information, installation instructions and photos below (post no30)
http://forum.xda-developers.com/showpost.php?p=49775913&postcount=30
Version 5
Information, installation instructions and photos below (post no25)
http://forum.xda-developers.com/showpost.php?p=48486739&postcount=25
Version 4
Information and photos below (post no4)
http://forum.xda-developers.com/showpost.php?p=44427775&postcount=4
Version 3
(mirror) (sendspace service)
- fixed gsm not working with some SIM cards (now i hope it can work with all networks)
- improve speed compared to version 2
- fixed other bugs
Version 2
- improved build.prop
- fixed account problem
- fixed camera problem
- fixed some crash bugs
- installed suggested programs (freeware)
Version 1
(initial release)
This ROM has preinstalled only the basic programs to allow you add any other program you desire from market.
I also suggest you another package of apps (dialers, sms apps, pictures and video apps) here
Alternative kernels
froyob3 kernel
CM6B2kernel
mini kernel
medium kernel
big kernel (original)
Installation instuctions:
We backup our data on our card
download mini-tool
connect your phone with computer on usb disk mode for our sdcard της (alternatively you can select your storage, but here i describe sd-card installation)
install and run minitool
select your sd-card and erase all partitions.
create a) one partition primary fat32 (the sum of sd-card's mb minus 1533 mb), B) one partition primary ext4 for our android sized 1333 mb , γ) one partition primary linux swap with the rest 200 mb
select apply and wait
you decompress the file ROM and Tools.rar
We change the date of our computer on any date of sept 2011
we run ImageRecover.exe
select restore (normal) and next
search on your computer the disk, the folder that our ROM is stored ( .TBI file) and select it
on the new window select select the last down option
then on the new window select the partition of our sf card to install (this is the medium partition sized 1333 mb (will write next to it MBR1.....linux native) and click onto it and press next
On next window when see "all data on linux native partition lost" press "yes" and wait copying to reach 100%
reopen minitool an if after ext4 partition there is left some unused/unformated space (grey colour) delete linux swap partition and create a new linux swap primary partition including this time the previously seen unused space
when finish select settings on your phone and change usb connection mode on your phone to "my storage"
In the root of "my storage" we paste a) haret.exe, B) zImage, c) startup.txt from the folder "copy to storage card root" from the rar we downloaded and decompressed
Disconnect our phone from usb, enter "my storage" and run haret.exe
this is the end. android starts. hope you enjoy
Hi guys, any reports on testing this ROM?
I want to set up my old Omnia 2 with Android for my gf, so I'm looking for a stable and simple ROM for her.
Thanx.
sergio_sos said:
Hi guys, any reports on testing this ROM?
I want to set up my old Omnia 2 with Android for my gf, so I'm looking for a stable and simple ROM for her.
Thanx.
Click to expand...
Click to collapse
You can try either my ROM or twister2 ROM from here http://forum.xda-developers.com/showthread.php?t=2342764
they are both the same level
the fastest is mine
faster GPS in on mine (ms-based preconfigured)
wi-fi i think works a little better on twister
twister has preloaded facebook etc, while mine has only stock apps
mine has business (single) coloured menus while twister has fancy (multi) coloured menus
if you want to install optional apps that have ads and you are not expert on android then install twister
if you want to install apps that do not have ads (or have ads and you are android expert) you can choose mine
please not that some people mentioned that with my ROM their SIM card was not recognized. i am not sure if the same for your SIM, your country.
Only two ROMS to choose. so you need only a few hours to try them both and make your decision. the choise is yours
Samsung i8000 (omnia2) android cm6new rom v4
as I promised long ago to publish
SAMSUNG I8000 (OMNIA2) ANDROID CM6NEW ROM Version 4
- Support even more SIM
- Speed improvement - response
- Corrected some errors
- Upgrading of most programs
- Show ics (ice cream sandwich - android 4.0.X)
- Arrangements for energy savings
The new enhancements took me some time and study. I8000 reaches its limits due to its old drivers that are already written for mobile identical hardware with it.
Hope you like it and I expect opinions and suggestions to version 5 if there will be any further developments. Otherwise I will try to assist in the plan for android 2.3 on our mobile.
Explanation photo below
1 = home screen (the background is black on purpose because the amoled screen thus consumes less energy. If you want to change select another background with as many black dots. Black and not just dark color.)
2 = dialer with ics theme, search function names and support many languagesk. Make it default dialer if you like it
3 = new android ics Task Manager (task manager). Appear with long press of home button. If you do not like replace it with the Advanced Task Manager or ICS Task Manager / Switcher. To open them again by long pressing the central button select Settings / Cyanogenmod Settings / Input / Long-press home settings / select custom application
4 = ics camera
5 = menu ics (holo launcher)
6 = ics settings
For those who want even more contemporary look can choose Active lockscreen or Holo Locker
I tried installing this on my Omnia II.
I successfully create the partitions on my SD card, but when I go to starting the process with the ROM file, it comes back with the error message:
"The image file requires an updated version of this program."
I grabbed the latest version just to try it, and I need to purchase a key to make it work.
Yes, I reset my computer clock to September 1st, 2011. Do i need to reboot the machine after the clock reset?
Everything else so far seems to work fine, and if this works even half as good as I think it will, props to you for getting this done. I hate hate HATE winblows 6.5 on my Omnia II, and always wanted android. I tried a few of the older attempts years ago, but nothing was every stable enough to keep it.
Thanks again for any help.
where can i download the ROM ?
nemogamo said:
where can i download the ROM ?
Click to expand...
Click to collapse
download from here
http://www.gigasize.com/get/ndmo3y3hj2f
Ragnarkov said:
I tried installing this on my Omnia II.
I successfully create the partitions on my SD card, but when I go to starting the process with the ROM file, it comes back with the error message:
"The image file requires an updated version of this program."
I grabbed the latest version just to try it, and I need to purchase a key to make it work.
Yes, I reset my computer clock to September 1st, 2011. Do i need to reboot the machine after the clock reset?
Everything else so far seems to work fine, and if this works even half as good as I think it will, props to you for getting this done. I hate hate HATE winblows 6.5 on my Omnia II, and always wanted android. I tried a few of the older attempts years ago, but nothing was every stable enough to keep it.
Thanks again for any help.
Click to expand...
Click to collapse
ok try this ROM recovery program
http://www.gigasize.com/get/fososg405ld
please read very carefully instructions. hundreds of people verify programs are working how come not work only on some pc's ?
spkraul said:
ok try this ROM recovery program
http://www.gigasize.com/get/fososg405ld
please read very carefully instructions. hundreds of people verify programs are working how come not work only on some pc's ?
Click to expand...
Click to collapse
I tried this program, and again, comes up with the same error message.
I'm getting to the point where I have to change the date, then run image for windows, but it just keeps giving me that error.
I'm running windows Vista, could that be causing the issue? is there any other information I need to change or pay attention too?
I'm literally doing everything step by step, and yet its not working for me.
spkraul said:
download from here
http://www.gigasize.com/get/ndmo3y3hj2f
Click to expand...
Click to collapse
downloading.. take a longtime
would you mirror to mediafire or 4shared
thx.. will report when its done
nemogamo said:
downloading.. take a longtime
would you mirror to mediafire or 4shared
thx.. will report when its done
Click to expand...
Click to collapse
it's only 542.27 KB. how long time can get to download ?
even if you have dial up or the server is full you need seconds to download it
just make sure the time change is ok and better cut all internet connections before execute the program
spkraul said:
it's only 542.27 KB. how long time can get to download ?
even if you have dial up or the server is full you need seconds to download it
just make sure the time change is ok and better cut all internet connections before execute the program
Click to expand...
Click to collapse
i think you have mistaken me with ragnarkov
anyway i already downloaded the file
follow the procedure
until trying to restore image
got an error " the image file requires an updated version of this program"
internet id off
antivirus is off
date set to 1 september 2011
I've just tested it, the same problem I had as others already mentioned. I went back to the version 3, success! So I think the version 4 image is damaged or not correctly made. By the way, the version 3 that did work for me has no microsd card support. You should modify by yourself the startup.txt file to enable the sd card support.
Hope my words can be helpful to others.
santich said:
I've just tested it, the same problem I had as others already mentioned. I went back to the version 3, success! So I think the version 4 image is damaged or not correctly made. By the way, the version 3 that did work for me has no microsd card support. You should modify by yourself the startup.txt file to enable the sd card support.
Hope my words can be helpful to others.
Click to expand...
Click to collapse
i made my ROM to be installed on sdcard with sdcard support. Hundreds of users already installed it and no problems at all. i installed V4 again last night and no problem at all. my phone is i8000 8gb version if you install on storage card YES you should edit startup.txt and also edit vold.fstab and fstab files.
if find some free time from android 2.3 development project testings i will make a Version 5 and on this version i hope minor problems to be solved.
I downloaded the newest version of Image for Windows, which is v2.83 (the one in the package is v2.61), the tool to write the image into the partition ext4, and this time, everything went just like a charm.
I have to admit that the V4 image is a very good one. It's really fast and clean. I think the problem that we had before is caused by the lower version of Image for Windows. V2.61 can't load correctly the V4 image file, which I think is made by a higher version of Image for Windows. With the new version of Image for Windows, it's even not necessary to change the date.
The Chiese ringtones in this ROM are hilarious. I'm a Chinese, they are OK with me. But I think original ringtones would be better for common users, hehehe.
great work , will it work on omnia b7610 too !!
Where can I download mini tool ?
---------- Post added at 09:05 AM ---------- Previous post was at 08:24 AM ----------
aljo00 said:
Where can I download mini tool ?
Click to expand...
Click to collapse
found it
Will this work on the Verizon i920? Thanks in advance.
matthewtyson said:
Will this work on the Verizon i920? Thanks in advance.
Click to expand...
Click to collapse
technically yes it can run. but i do not own one to test it myself. you can try yourself and tell us your experiences. test on sd card installation first. it it pretty smooth and fast. you will be amazed. in case it will not work you can always check TwisterV2 ROM also very fast and smooth
see here http://forum.xda-developers.com/showthread.php?t=2342764
alternatively in case you meet some driver conflicts you can always use ubuntu and other ROM's drivers to edit this ROM and make it work for you.
spkraul said:
i made my ROM to be installed on sdcard with sdcard support. Hundreds of users already installed it and no problems at all. i installed V4 again last night and no problem at all. my phone is i8000 8gb version if you install on storage card YES you should edit startup.txt and also edit vold.fstab and fstab files.
if find some free time from testings i will make a Version 5 and on this version i hope minor problems to be solved.
Click to expand...
Click to collapse
I am facing the same issue, I cannot load my Storage Card.
1. I am confuse with term SD Card here. Is it refer to Storage Card or My Storage? Storage Card means external micro sd card, isn't?
2. I followed the instruction and put the Image to Storage Card. How can I activate the Storage Card Support by editting fstab files? Where can I find these files?
3. I had format Partition 1333Mb to ext4 File System, but I wonder why it always turn to ext3 after I restore TBI file(after ImageRecover step). Is it okay?
Thanks.
YONSTOPTECH AWINNER A31 KIT KAT TABLET 10.1 / 2GB RAM 8 OR 16 GB STORAGE, ANDROID 44.4.2 HDMI, 1080X600 DISPLAY.2 MICRO USB OTG PORTS, MICRO SD CARD SLOT, PRE ROOOTED OR IF NOT SEE BELOW. MADE FOR OEM ONLY BUT MORE GENERIC MODEL HAVE BEEN SEEM THAN AN ACTUALLY OEM LIKE GOOWEEL, FUSION, ONDA, ETC. UNDER $130 ON EBAY COMES WITH ALL CONNECORS, EXT SD CARD, STYLUS, AND TABLET/
I'VE SEEM VARIOUS QUESTIONS ASKED ABOUT MODEL BS 1078 ,ALL OVER THE WEB, ENOUGHTHAT I WISH TO SHARE SOME BASIC AND USEFULL INFO WITH THE MASSES.
ROOT....
THE Best AND EASIET WAY TO ROOT FOR ME HAS BEEN (I OWN 4) ROOT GENIOUS , FOR DOWNLOAD AND INSTRUCTIONS http://androidxda.com/DOWNLOAD-ROOT-GENIUS
IT'S A COMPONANT OF SHUAME AND IS A ONE CLICK ROOT METHOD STANDALONE IN ENGLISH.
RECOVERY...
BASIC RECOVERY IS INSTALLED ALREADY AS MY TABLET WERE PRE ROOTED., THOUGH SOM,E HAVE HAD DIFFICULTY USING THE MANUFACTURER AS THE VOLUME KEYS DON'T WORK PERFECTLY
A TIP=INSTALLED A MOUSE THROUGH THE OTG CABLE PROVIDED AND JUST MOVE MOUSE AROUND TO HIGHLIGHT SELECTION, THE VOLUME UP BUTTON FOR SELECTION. DO NOT PRESS VOLUME DOWN. LET'S YOU UPDATE FROM BOTH INTERESTING AND EXTERNAL
FIRMWARE/ROM ... THE LATESTKITKAT ROM FOR AUGUST 2014 IS AVAILABLE,NOT SURE OF IT'S CHANGELOG AS I'M HAPPY WITH THE 6 29 VERSION AND DON'T WANT TO CABLE YET .SOME HAVE THIS TABLET WITH 4.2, THIS UPGRADE IS TO4.4.2
http://pan.baidu.com/share/home?uk=1679008622 IS THE LINK TO FIRMWARE
TOOLS....
ALLWINNER INCLUDE THE TOOLS FOR EASY SD CARD FLASHING IN THE ALLWINNER A SERIES SDK FOR KITKAT. YOU'LL NEED A 4GB SD CARD, PHEONIX CARD.MSI AND THE WORD DOC INCLUDE IN FIRMWARE PACKAGE TO PUT ONTO EXTERNAL SD CARD SHOULD YOU WISH TO INSTALLED THAT WAY, WHEN POWER ON IT SHOULD START TO BOOT WITH YOUR EXT SD INSERTED, FROM THE SD CARD. ONCE IT REBOOTS, TAKE OUT EXT SD CARD, AND YOUR GOOD TO GO
HERE IS THE FULL SDK THAT YOU'LL NEED AS IT INCLUDE DRIVERS AND TOOLS FOR TWEAKING THE ROM, CHANGE BOOT ANIMATION , AND VARIOUS OTHER. OEM DIRECTED TWEAKS.
http://pan.baidu.com/wap/link?sharei...r_TOOLS&page=1
IN EACH DOWNLOAD ABOVE INCLUDES A WORD DOC IN EN/CHINESE WITH DIAGRAMS TO SHOW YOU HOW TO FLASH, MOD, EDIT BUILD.PROP ETC.
ANY QUESTIONS, DON'T HESITATE TO ASK
PAUL TARANEH
ALSO REF TO http://forum.xda-developers.com/showthread.php?t=2704721 FOR MORE INFO ABOUT ROOTING TABLET
Paulzt said:
YONSTOPTECH AWINNER A31 KIT KAT TABLET 10.1 / 2GB RAM 8 OR 16 GB STORAGE, ANDROID 44.4.2 HDMI, 1080X600 DISPLAY.2 MICRO USB OTG PORTS, MICRO SD CARD SLOT, PRE ROOOTED OR IF NOT SEE BELOW. MADE FOR OEM ONLY BUT MORE GENERIC MODEL HAVE BEEN SEEM THAN AN ACTUALLY OEM LIKE GOOWEEL, FUSION, ONDA, ETC. UNDER $130 ON EBAY COMES WITH ALL CONNECORS, EXT SD CARD, STYLUS, AND TABLET/
I'VE SEEM VARIOUS QUESTIONS ASKED ABOUT MODEL BS 1078 ,ALL OVER THE WEB, ENOUGHTHAT I WISH TO SHARE SOME BASIC AND USEFULL INFO WITH THE MASSES.
ROOT....
THE Best AND EASIET WAY TO ROOT FOR ME HAS BEEN (I OWN 4) ROOT GENIOUS , FOR DOWNLOAD AND INSTRUCTIONS http://androidxda.com/DOWNLOAD-ROOT-GENIUS
IT'S A COMPONANT OF SHUAME AND IS A ONE CLICK ROOT METHOD STANDALONE IN ENGLISH.
RECOVERY...
BASIC RECOVERY IS INSTALLED ALREADY AS MY TABLET WERE PRE ROOTED., THOUGH SOM,E HAVE HAD DIFFICULTY USING THE MANUFACTURER AS THE VOLUME KEYS DON'T WORK PERFECTLY
A TIP=INSTALLED A MOUSE THROUGH THE OTG CABLE PROVIDED AND JUST MOVE MOUSE AROUND TO HIGHLIGHT SELECTION, THE VOLUME UP BUTTON FOR SELECTION. DO NOT PRESS VOLUME DOWN. LET'S YOU UPDATE FROM BOTH INTERESTING AND EXTERNAL
FIRMWARE/ROM ... THE LATESTKITKAT ROM FOR AUGUST 2014 IS AVAILABLE,NOT SURE OF IT'S CHANGELOG AS I'M HAPPY WITH THE 6 29 VERSION AND DON'T WANT TO CABLE YET .SOME HAVE THIS TABLET WITH 4.2, THIS UPGRADE IS TO4.4.2
http://pan.baidu.com/share/home?uk=1679008622 IS THE LINK TO FIRMWARE
TOOLS....
ALLWINNER INCLUDE THE TOOLS FOR EASY SD CARD FLASHING IN THE ALLWINNER A SERIES SDK FOR KITKAT. YOU'LL NEED A 4GB SD CARD, PHEONIX CARD.MSI AND THE WORD DOC INCLUDE IN FIRMWARE PACKAGE TO PUT ONTO EXTERNAL SD CARD SHOULD YOU WISH TO INSTALLED THAT WAY, WHEN POWER ON IT SHOULD START TO BOOT WITH YOUR EXT SD INSERTED, FROM THE SD CARD. ONCE IT REBOOTS, TAKE OUT EXT SD CARD, AND YOUR GOOD TO GO
HERE IS THE FULL SDK THAT YOU'LL NEED AS IT INCLUDE DRIVERS AND TOOLS FOR TWEAKING THE ROM, CHANGE BOOT ANIMATION , AND VARIOUS OTHER. OEM DIRECTED TWEAKS.
http://pan.baidu.com/wap/link?sharei...r_TOOLS&page=1
IN EACH DOWNLOAD ABOVE INCLUDES A WORD DOC IN EN/CHINESE WITH DIAGRAMS TO SHOW YOU HOW TO FLASH, MOD, EDIT BUILD.PROP ETC.
ANY QUESTIONS, DON'T HESITATE TO ASK
PAUL TARANEH
ALSO REF TO http://forum.xda-developers.com/showthread.php?t=2704721 FOR MORE INFO ABOUT ROOTING TABLET
Click to expand...
Click to collapse
Good thread Paul nice to have a place to discuss this tablet i have just posted in the other thread you refereed to but will also post it here below
I bought a 10.1 Allwinner A31s 16GB from Ebay for £60 the device details show as a YONESTOPTECH BS1078
It is a nice tablet for the price and came pre rooted witch was great.
One of the first things i did was make a backup off the Rom with online nandroid backup as i like messing and wanted a backup just in case i messed up. and here is where things got messy, online nandroid backup would only be able to restore if i had a custom recovery (CWM or TWRP)
So off i went and tried to install TWRP from the guide on this thread http://forum.xda-developers.com/showthread.php?t=2210676
Long story short it didn't work an i thought i had bricked it as it was stuck on the boot logo, i managed to find FW for a Q102 A31S Tablet Stock Firmware 4.4.2 wich is the same tablet under a different name, after several failed attempts to recover through phoenix suite as i couldn't get it into recovery, i downloaded phoenixcard and successfully flashed the FW Phew all was good lol.
So if anyone has successfully installed a custom recovery any info would be grateful as it would be nice to try a custom Rom.
I have also had a little play with dragonface for allwinner devices as this lets you change a few things on the stock ROM ISO and then you can re flash with your custom changes, Two things i would like to tweak are volume and lcd settings as i feel the volume on this device is to quiet and the lcd contrast could do with tweaking. in dragon face you can load the sys.cofig settings, i have found the volume config but haven't got a clue what can be changed to increase the max volume level so if anybody has any knowledge then any input would be appreciated, here is the code for audio settings,
Code:
;pa_single_vol,pa_double_vol: 31 level,1.5db/step.0x1f is the large volume.
;cap_vol:use for system record,0x0--0db,0x1--24db,0x2--27db,0x3--30db,0x4--33db,0x5--36db,0x6--39db,0x7--42db
;headphone_vol,earpiece_vol: must least than 0x3b. 0x1 is a step.
;headset_mic_vol: headset mic(mic2) vol,use for phone headset mic call
;main_mic_vol: main mic(mic1) vol,use for phone main mic call
;--------------------------------------------------------------------------------
[audio_para]
audio_used = 1
audio_hp_ldo = "none"
headphone_vol = 0x3b
earpiece_vol = 0x3b
cap_vol = 0x7
pa_single_vol = 0x1b
pa_double_used = 1
pa_double_vol = 0x1f
headphone_direct_used = 0
headphone_mute_used = 0
audio_pa_ctrl = port:PA18<1><default><default><0>
audio_mute_ctrl = port:PA17<1><default><default><0>
headset_mic_vol = 6
main_mic_vol = 6
Thanks in advance for any input
Click to expand...
Click to collapse
Got straight from manufacturer today
The FW download link:
Updata tools: http://pan.baidu.com/s/1pJkEHAF
FW: http://pan.baidu.com/s/1gdw0sSz
Of anyone can flash and offer any input that's great.
Thanks,,,, Paul Taraneh
Sorro for offtopic, but has anyone found a suitable case for this tablet?
Paulzt said:
Got straight from manufacturer today
The FW download link:
Updata tools: http://pan.baidu.com/s/1pJkEHAF
FW: http://pan.baidu.com/s/1gdw0sSz
Of anyone can flash and offer any input that's great.
Thanks,,,, Paul Taraneh
Click to expand...
Click to collapse
Just flashed that FW and can confirm it is the stock FW pre rooted and working fine.
Thanks
Sent from my rk3288 using XDA Premium 4 mobile app
ezcast application install error
Hi,
I get an error message when I try to install the ezcast app on the tablet, do you have any
idea why this would happen? I would really like to cast from this device to my tv.
Also when I try to install the fulltilt poker app from fulltilt.com, the site doesn't recognize my
device as an android device. I got over it by copying the .apk file from another device but
I just thought to mention it.
Thanks,
Zohar
Hmm. I've been able to install ezcast on mine, and maybe the poker game was initially meant for windows. Your tab most likely came pre rooted so check your root permission. For ez cast contact the apps developer he is very good at replying just give all stats from about phone . good luck
Sent from my XT1034 using XDA Premium 4 mobile app
Now I know the button + problem prior to update rom
Paulzt said:
YONSTOPTECH AWINNER A31 KIT KAT TABLET 10.1 / 2GB RAM 8 OR 16 GB STORAGE, ANDROID 44.4.2 HDMI, 1080X600 DISPLAY.2 MICRO USB OTG PORTS, MICRO SD CARD SLOT, PRE ROOOTED OR IF NOT SEE BELOW. MADE FOR OEM ONLY BUT MORE GENERIC MODEL HAVE BEEN SEEM THAN AN ACTUALLY OEM LIKE GOOWEEL, FUSION, ONDA, ETC. UNDER $130 ON EBAY COMES WITH ALL CONNECORS, EXT SD CARD, STYLUS, AND TABLET/
I'VE SEEM VARIOUS QUESTIONS ASKED ABOUT MODEL BS 1078 ,ALL OVER THE WEB, ENOUGHTHAT I WISH TO SHARE SOME BASIC AND USEFULL INFO WITH THE MASSES.
ROOT....
THE Best AND EASIET WAY TO ROOT FOR ME HAS BEEN (I OWN 4) ROOT GENIOUS , FOR DOWNLOAD AND INSTRUCTIONS http://androidxda.com/DOWNLOAD-ROOT-GENIUS
IT'S A COMPONANT OF SHUAME AND IS A ONE CLICK ROOT METHOD STANDALONE IN ENGLISH.
RECOVERY...
BASIC RECOVERY IS INSTALLED ALREADY AS MY TABLET WERE PRE ROOTED., THOUGH SOM,E HAVE HAD DIFFICULTY USING THE MANUFACTURER AS THE VOLUME KEYS DON'T WORK PERFECTLY
A TIP=INSTALLED A MOUSE THROUGH THE OTG CABLE PROVIDED AND JUST MOVE MOUSE AROUND TO HIGHLIGHT SELECTION, THE VOLUME UP BUTTON FOR SELECTION. DO NOT PRESS VOLUME DOWN. LET'S YOU UPDATE FROM BOTH INTERESTING AND EXTERNAL
FIRMWARE/ROM ... THE LATESTKITKAT ROM FOR AUGUST 2014 IS AVAILABLE,NOT SURE OF IT'S CHANGELOG AS I'M HAPPY WITH THE 6 29 VERSION AND DON'T WANT TO CABLE YET .SOME HAVE THIS TABLET WITH 4.2, THIS UPGRADE IS TO4.4.2
http://pan.baidu.com/share/home?uk=1679008622 IS THE LINK TO FIRMWARE
TOOLS....
ALLWINNER INCLUDE THE TOOLS FOR EASY SD CARD FLASHING IN THE ALLWINNER A SERIES SDK FOR KITKAT. YOU'LL NEED A 4GB SD CARD, PHEONIX CARD.MSI AND THE WORD DOC INCLUDE IN FIRMWARE PACKAGE TO PUT ONTO EXTERNAL SD CARD SHOULD YOU WISH TO INSTALLED THAT WAY, WHEN POWER ON IT SHOULD START TO BOOT WITH YOUR EXT SD INSERTED, FROM THE SD CARD. ONCE IT REBOOTS, TAKE OUT EXT SD CARD, AND YOUR GOOD TO GO
HERE IS THE FULL SDK THAT YOU'LL NEED AS IT INCLUDE DRIVERS AND TOOLS FOR TWEAKING THE ROM, CHANGE BOOT ANIMATION , AND VARIOUS OTHER. OEM DIRECTED TWEAKS.
http://pan.baidu.com/wap/link?sharei...r_TOOLS&page=1
IN EACH DOWNLOAD ABOVE INCLUDES A WORD DOC IN EN/CHINESE WITH DIAGRAMS TO SHOW YOU HOW TO FLASH, MOD, EDIT BUILD.PROP ETC.
ANY QUESTIONS, DON'T HESITATE TO ASK
PAUL TARANEH
ALSO REF TO http://forum.xda-developers.com/showthread.php?t=2704721 FOR MORE INFO ABOUT ROOTING TABLET
Click to expand...
Click to collapse
Let pressed the button + and hit hit hit hit the power button a lot of times after you begin press the power button some times connect to pc and when in the devices manager appear the new device and start to configure it let it the table quiet now go to pc wait a moment to windows configure it and do it with phoenix, if somebody have win 8 8.1 or 7 x64 you must disble signatures of drivers, in windows 8 go to restar but dont press the button restart, press shift and with shift pressed clic in restar a menu appear go to advanced options, advanced options and later the pc restart with a menu there press 7 for disable the driver signature and there install phoenixm if you already installed install it again and you can see the diferrences, now my tablet is with a new rom and i made it in win 8.1 x64, thanks for all the info, steps and rom thank so much
Anyone know if there's a version of 'CyanogenMod' available for this tablet ???
Thnxs in advance for any info.
I just purchased an AllWinner Q102 Tablet. It took me a day or so to realize that it also is pre-rooted. Here is my problem. I continue to get errors that say "unfortunately google play.... has stopped." or "unfortunately Netflix has stopped"
It's driving me crazy! I can't use any of my regular apps.
The model is a Q102
Android Version
4.4.2
Firmware version
v4.5.0919P
Kernel version
3.3.0
[email protected] #20
Wed Sep 10 21:31:21 CST 2014
It seems like a nice little tablet for the price....
I would rather go to stock if it works rather than a root that is flakey
Thanks for any help you can give!
My Google Play reboots, but no "unfortunately" messages
djrnewcastle said:
I just purchased an AllWinner Q102 Tablet. It took me a day or so to realize that it also is pre-rooted. Here is my problem. I continue to get errors that say "unfortunately google play.... has stopped." or "unfortunately Netflix has stopped"
It's driving me crazy! I can't use any of my regular apps.
The model is a Q102
Android Version
4.4.2
Firmware version
v4.5.0919P
Kernel version
3.3.0
[email protected] #20
Wed Sep 10 21:31:21 CST 2014
It seems like a nice little tablet for the price....
I would rather go to stock if it works rather than a root that is flakey
Thanks for any help you can give!
Click to expand...
Click to collapse
I seem to have the identical tablet (specdevice . com / showspec.php ? id=5f13-c36d-ffd4-db280033c587) purchased in October. Mine was also pre-rooted, and it took me a while to figure that out too!
I do not see the messages/crashes that you see; my apps generally run with stability. I do occasionally experience surprise reboots (presumably from crashes) when I connect a USB device or am attempting to upgrade a large app via Google Play. I assume that my Google Play reboots are somehow related to running out of app disk space. Even though my tablet has 32 GB flash internally (split into two 16 GB flash devices) for some reason only 2GB was allocated to the /data partition, where apps are installed. When I found your post, I was actually looking for a solution to increase my tablet's /data partition. I read about different firmware downloads available (earlier in this thread, and in a chinagadgetsreviews blogspot -- sorry, XDA does not let me post links yet) but don't know whether they would help me with my small /data partition problem.
I'd be happy to test any particular apps on my tablet, if that would be of diagnostic use to you. And please let me know if you ever discover a solution to increase the app disk space.
bs1078 tonbux 10.1
Hi mines same bricked it with something now only get heart screen anyone know a fix memory man issues I had root toolbox app and you can change memory cache size etc if not another app carefully as can brick if Ness wrong settings ie screen resolution
stuck on first logo not android man
Hi got same tablet but stuck on very first logo do you know if this is still bootable by your method ? Thanks in advance for any assist
jayden91012 said:
Hi got same tablet but stuck on very first logo do you know if this is still bootable by your method ? Thanks in advance for any assist
Click to expand...
Click to collapse
Jayden just reflash the firmware with phoenix suite.
---------- Post added at 10:05 AM ---------- Previous post was at 10:01 AM ----------
cqfast said:
I seem to have the identical tablet (specdevice . com / showspec.php ? id=5f13-c36d-ffd4-db280033c587) purchased in October. Mine was also pre-rooted, and it took me a while to figure that out too!
I do not see the messages/crashes that you see; my apps generally run with stability. I do occasionally experience surprise reboots (presumably from crashes) when I connect a USB device or am attempting to upgrade a large app via Google Play. I assume that my Google Play reboots are somehow related to running out of app disk space. Even though my tablet has 32 GB flash internally (split into two 16 GB flash devices) for some reason only 2GB was allocated to the /data partition, where apps are installed. When I found your post, I was actually looking for a solution to increase my tablet's /data partition. I read about different firmware downloads available (earlier in this thread, and in a chinagadgetsreviews blogspot -- sorry, XDA does not let me post links yet) but don't know whether they would help me with my small /data partition problem.
I'd be happy to test any particular apps on my tablet, if that would be of diagnostic use to you. And please let me know if you ever discover a solution to increase the app disk space.
Click to expand...
Click to collapse
I reccommend a app called foldermount (Root) you can change storage location to extsd i use it for most games and large apps had this tablet about year now.
Hi ... are the links for firmware etc. in post #1 still good ?,
I don't seem to get anywhere finding the download. ... Jack
jachol said:
Hi ... are the links for firmware etc. in post #1 still good ?,
I don't seem to get anywhere finding the download. ... Jack
Click to expand...
Click to collapse
Here you go jack this is the link to q102 firmware which is same as bs1078 stock.
http://chinagadgetsreviews.blogspot.com/2014/09/download-android-kitkat-442-stock_11.html
If you need anything else just ask i have most stuff on my laptop for this device if needed if links not working.
DJBoxer said:
Here you go jack this is the link to q102 firmware which is same as bs1078 stock.
http://chinagadgetsreviews.blogspot.com/2014/09/download-android-kitkat-442-stock_11.html
If you need anything else just ask i have most stuff on my laptop for this device if needed if links not working.
Click to expand...
Click to collapse
Hi DJB,
Thanks for quick reply ... downloading now, not sure think tried this source before (long story),
will try it with Phoenix USB Pro, chances are I need to come back to you thanks for the offer,
PM will be best I think. ... Jack
Hi,
I have this same tablet and i have a problem. When i connect it to my computer or my girlfriend´s(win 7 and 8.1) The tablet is not recongnized.
anybody know why ? i was trying around to find the drivers but i only found google ones.
I would be really thankfull if u could give me a hand on this.
Lomezno said:
Hi,
I have this same tablet and i have a problem. When i connect it to my computer or my girlfriend´s(win 7 and 8.1) The tablet is not recongnized.
anybody know why ? i was trying around to find the drivers but i only found google ones.
I would be really thankfull if u could give me a hand on this.
Click to expand...
Click to collapse
Hi, sorry for late reply, been tied up with family business for a whle.
re. drivers Pda. net drivers seem to work OK for me, this link should help ... J
http://forum.xda-developers.com/showthread.php?t=1983470
Hello,
is possible manually update my tablet to Android 5? I found this
but from ( ROM Part 1 : http://goo.gl/7pyL97 ) this site i cant download ROM
Upgrade/Update Vodafone Smart Tab 4g to 5.0 Lollipop
Upgrade/Update Vodafone Smart Tab 4g to 5.0 Lollipop
I rewrite this tutorial from forum.xda-developers.com :
The users of Vodafone Smart Tab 4g can now update their handsets to Android 5.0 Lollipop using custom ROM. The new Android 5.0 Lollipop comes with many new features :
- Up to 4x performance improvements.
- A battery saver feature which extends device use by up to 90 mins.
- It has a faster, smoother and more powerful computing experience.
- Support for 64-bit SoCs using ARM, x86, and MIPS-based cores.
- OpenGL ES 3.1 and Android extension pack brings Android to the forefront of mobile graphics putting it on par with desktop and console class performance.
- Responsive, natural motion, realistic lighting and shadows, and familiar visual elements make it easier to navigate your device.
- More intelligent ranking of notifications based on who they’re from and the type of communication. See all your notifications in one place by tapping the top of the screen.
- New devices come with encryption automatically turned on to help protect data on lost or stolen devices.
- SELinux enforcing for all applications means even better protection against vulnerabilities and malware.
- State of the art video technology with support for HEVC main profile to allow for UHD 4K 10-bit video playback, tunneled hardware video decoding to save power and improved HLS support for streaming.
- and other cool features.
Here are some more aspects that users should know before trying out the custom ROM :
- Users need to have proper back-up for their personal data on the device.
- The handset should have at least 80 percent of battery power.
- The users also need to ensure that USB Debugging is enabled on the device.
- During the installation, if the device gets stuck on booting, users can perform wipe cache partition and wipe dalvik before rebooting the device.
Tutorial
1. Download Android 5.0 Lollipop ROM for Vodafone Smart Tab 4g from link below :
The ROM File size is big, so I split the file into 3 parts :
ROM Part 1 : http://goo.gl/7pyL97
ROM Part 2 : http://goo.gl/ffHU2x
ROM Part 3 : http://goo.gl/l1zKh5
To combine 3 parts files above into 1 file just use WINRAR, then extract the files into ZIP format. If any problem with the ROM, maybe because the ROM have corrupted during the download process, you can try to re-download the ROM.
2. Install the ROM Manager on your Vodafone Smart Tab 4g . Get it from Google Play Store, then install the clockwork mod recovery. You also can use ROM Installer application from JRummy Apps Inc.(Get it from Google Play Store).
3. Connect your Vodafone Smart Tab 4g to your PC employing the USB information cable. Copy the “ROM.zip” file you downloaded to the SD memory card.
4. Restart your device in the recovery mode using ROM Manager. As soon as in Recovery Mode, go to ROM Manager and select backup/restore to back-up your information.
5. From the Recovery Menu do a total data erase (including Delvik Cache). When completed, go back to Recovery Principal Menu and choose Flash ROM from SD Card. Navigate the location you copied the ”ROM.zip” file and follow the directions for installing Android 5.0 Lollipop on your Vodafone Smart Tab 4g . As soon as the installation is over, just reboot your Vodafone Smart Tab 4g device, and here you go, you’ve just upgraded it to the new Android 5.0 Lollipop.
Hi:
did you tried it? Have you got root on your Vodafone Smart Tab 4G? I found out a thread with the root file/method, but the file link is broken
jrosado said:
Hi:
did you tried it? Have you got root on your Vodafone Smart Tab 4G? I found out a thread with the root file/method, but the file link is broken
Click to expand...
Click to collapse
The link is now up in modaco.But users are reporting that since an update the root method doesn't work.
skinniezinho said:
The link is now up in modaco.But users are reporting that since an update the root method doesn't work.
Click to expand...
Click to collapse
yes i know.. I'm one of them
I don't understand why some prick upload all tools (root utility and ROMs) for Vodafone Smart Tab 4G to that disreputable server http://downloadsafe.org/? For download it want to send payment SMS messages!!!!! :crying:
If you want my opinion, i think that this supposed lollipop version is fake...
On another forum I've seen this and reports that it works.
I don't have the device (still deciding wether to buy it or not) so I can't test it
http://duben.org/android/vodafone-smart-tab-4g-root-navod
Yes, I've seen that link just a few minutes ago. I will try it tonight, since i don't have my tablet with me now.
Hi, this tutorial duben.org/android/vodafone-smart-tab-4g-root-navod is mine, I was wrote it yesterday in czech language, I hope pictures there are informative enough. In case you need rewrite it to english, let me know, I can take care of it.
Well it worked
But still impossible to use the SD card to install apps Nothing seems to work (app2SD, ...)
jrosado said:
Well it worked
But still impossible to use the SD card to install apps Nothing seems to work (app2SD, ...)
Click to expand...
Click to collapse
I have same issue. Apps can work with data on SD Card, for example RawDroid can edit photos, save/delete files. But App2SD functionality is still not supported. It should work with Link2SD app and 2 partitions on SD card. The reason is emulated external storage in internal memory. I didn't find yet how to turn this of, or how to change it.
sduben said:
I have same issue. Apps can work with data on SD Card, for example RawDroid can edit photos, save/delete files. But App2SD functionality is still not supported. It should work with Link2SD app and 2 partitions on SD card. The reason is emulated external storage in internal memory. I didn't find yet how to turn this of, or how to change it.
Click to expand...
Click to collapse
I've tried Link2SD, but with no success. The best i got was to use MountFolder to move the applications data to the external SD card. With this, I've recovered some good precious space (for example, Minion Rush was using 330MB that where freed).
jrosado said:
I've tried Link2SD, but with no success. The best i got was to use MountFolder to move the applications data to the external SD card. With this, I've recovered some good precious space (for example, Minion Rush was using 330MB that where freed).
Click to expand...
Click to collapse
Thanks for tip FolderMount (play.google.com/store/apps/details?id=com.devasque.fmount) works like a charm.
If anyone wants the source code, here it is:
Code:
http://sourceforge.net/projects/alcatel/files/VF_SmartTab4G_20140923.tar.xz
It was awesome if we could get a rom for this tablet =)
People say it is based on Alcatel Pop 8S tablet, but I have never seen this tablet on sale, neither original roms, nothing about it.
Only alcatel website has some info about it, but not much: http://www.alcatelonetouch.com/global-en/products/tablets/pop_8s.html#.VOPaQfmsVoc
Anyone managed to remove system apps?
Titanium backup says it can't find the apks..
In Android 4.4, apps can't write the sd-card, it's a security thing. But there are apps, which enables sd write. And yes, we have source, but for ROMs we also need recovery, and a developer. But fingers crossed.
sduben said:
Hi, this tutorial duben.org/android/vodafone-smart-tab-4g-root-navod is mine, I was wrote it yesterday in czech language, I hope pictures there are informative enough. In case you need rewrite it to english, let me know, I can take care of it.
Click to expand...
Click to collapse
Anyone tried that? can you confirm that it works?
Any other method that roots 4.4.4?
Yes and it is work. Only "bug" after the root is: every time you reboot your tablet you will got a message that says android is upgrade-ing and continues to updating apps. But it is work.
Sent from my GT-S7560 using XDA Free mobile app
MAROCANU said:
Yes and it is work. Only "bug" after the root is: every time you reboot your tablet you will got a message that says android is upgrade-ing and continues to updating apps. But it is work.
Sent from my GT-S7560 using XDA Free mobile app
Click to expand...
Click to collapse
I stuck on step 7. Finding device... But I did step 5...
What u mean updating apps.? Updates all apps from store?
No, optimezing. Its that thing when android take an update and after that the apps is optimezed. This happening after each reboot. About the root process: if you use win 8, 8.1 you wont be able to rootbso easly because of the drivers. Try with win xp or 7. My advice: use XP. I did it with it.
Sent from my GT-S7560 using XDA Free mobile app
So, to get this straight: we can actually root the Vodafone smart tab 4g and flash custom roms??
Did anyone try this CM13?
It is only listed in CM13-ChangeLogs but not within Cyanogen-Downloads
https://www.cmxlog.com/13/lt03lte/
Hello and thank you for using XDA Assist,
sure you can download the ROM here:
CyanogenMod 13 Download
I will get you thread moved to your device section. There you can discuss this with other users.
Kind regards
Trafalgar Square
XDA Assist
Meanwhile the Rom seems to be listed in Cyanogemod download section. Some time ago it was not. And nowhere I can find user experiences. Would be great to get feedback. Thanks very much.
I have tried this ROM (cm-13.020160501-NIGHTLY) nothing majorly wrong with it except:
1. I don't have a sim card to test 4g/3g connectivity, so can't test phone/message/GPS functions as well. So these parts are unknown.
2. The quick view drawer (in home screen when you hold from top and swipe down to bring out system/profile/recent notification drawer), it display nothing except basic information like time/date profile head bubble. It will not display ANY notifications even you have new email etc. It always display "No notifications"
3. No lock screen, at all. So you can't preview any information like above. When you press home button it brings up your home screen straight away. If you have pattern lock / pin lock, yes you will have a lock screen normally, however again it will not have any notifications even you have new ones.
4. No USB connection option. On my Oneplus One (bacon) with CM13, when you connect USB cable to the PC, you can choose USB function from "charging" to something like "data transfer" etc. However, on my P605 (lt03lte) it displays nothing (since it can't display any notification). Even after enable USB debugging mode (which is called Android debugging in CM13), enable Debugging notify, changing "Select USB configuration" from "charging" to any other modes, none of above work. This is huge problem for me because this simply means I can't transfer any files from my PC to tablet and the mirco sd card.
5. For some reason all data from my micro sd card are not accessible, or I should say are not naturally supported. When you try to view eg. photos from micro sd card, and open "Gallery" provided, it will shows "0 images/videos available". However, it can be accessed when you go to Settings>Storage & USB>Portable Storage and you will see the micro sd card there. So you can copy files from system storage to micro sd.
6. It takes longer time to boot up compared to my Oneplus One and will have completely black screen (scary long waiting time, estimated about 15 seconds long) when you downloaded and flashed newer ROM. So be patient if you are updating. I experienced that "black screen" every time when I update my ROM or reinstalling through TWRP.
All processes I never experienced any softbrick.
I am not sure if it is just me or everyone is experiencing the same things, like you said, you can't find any reviews online...
Other than above it is an awesome ROM, definitely cleaner compared to stock ROM.
If you wish to update to Marshmallow on your P605, I strongly recommend Schischu's Marshmallow ROM from xda-developers. (Google search: p605 marshmallow) It is very stable for me and seems no faults.
I am currently still sticking with "cm-13.020160501-NIGHTLY" ROM and hoping it will fix above issues when updates,
Feel free to ask me any questions,
Thank you very much for this very detailed review.
Have prepared the SM-P605 yesterday for my father. First impressions where very good. Starting ultra fast.
Unfortunately, a SIM-card has not being tested.
As far as notification are concerned, I have to wait for feedback from father's side.
Update was not tested.
The MM-Rom you mentioned seems not to be a Cyanogenmod, but an AOSP, isn't it? Last time I used AOSP, it could not read exFat formatted microSDXC cards. That was the main reason for me not to use the AOSP-Rom.
Will gather more information within the upcomming weeks. Maybe there are more users who provide useful impression on CM13 ...
noratroll said:
Thank you very much for this very detailed review.
Have prepared the SM-P605 yesterday for my father. First impressions where very good. Starting ultra fast.
Unfortunately, a SIM-card has not being tested.
As far as notification are concerned, I have to wait for feedback from father's side.
Update was not tested.
The MM-Rom you mentioned seems not to be a Cyanogenmod, but an AOSP, isn't it? Last time I used AOSP, it could not read exFat formatted microSDXC cards. That was the main reason for me not to use the AOSP-Rom.
Will gather more information within the upcomming weeks. Maybe there are more users who provide useful impression on CM13 ...
Click to expand...
Click to collapse
No I am using CM13 from official Cyanogenmod Website.
I have also tried AOSP-ROM before I flashed to Cyanogenmod. My micro SD card is actually working in AOSP. I can't remember the actually details but I DO remember it prompt a message to ask me to FORMAT the micro SD card before use. Gladly I have all data in micro SD backup to my PC before flashing AOSP. So in the end I don't lose anything in micro SD. And sorry I can't remember what format my microSDXC before flash to AOSP.
And yes Cyanogenmod rom is ultra fast and clean absolutely no bloatwares, also requires minimum space. After flashed to Cyanogenmod + gapps it only uses up to 600~700mbs in total which is amazing. I will stick to Cyanogenmod and use it for now. By the speed they update hopefully they can come up with a better ROM (finger crossed).