Related
After I rooted my kindle and installed adw.launcher everything was going fine. I rebooted my kindle and out of nowhere it refuses to start. Absolutely nothing shows up at all. The screen doesn't come on, the logo, nothing. The battery was at 75% when it was working. Even when I plug it in the orange charge light doesn't even come on. I need help badly and I would prefer not to have to send it in to get a replacement. The entire reason I created this xda account was to fix this. Please I need help.
That doesn't sound good. Press and hold the on button for like 20 seconds and see if anything happens.
jaredkzr said:
After I rooted my kindle and installed adw.launcher everything was going fine. I rebooted my kindle and out of nowhere it refuses to start. Absolutely nothing shows up at all. The screen doesn't come on, the logo, nothing. The battery was at 75% when it was working. Even when I plug it in the orange charge light doesn't even come on. I need help badly and I would prefer not to have to send it in to get a replacement. The entire reason I created this xda account was to fix this. Please I need help.
Click to expand...
Click to collapse
Try the Hard reset option as explained by GBH2 and if it doesn't help, then please list down what exactly did you do to root your device, stock FW version etc.
Sent from my GT-I9100 using XDA App
I have already tried the hard reset but to no avail. I have no idea what happened to it. I think I will just have to get a replacement. I followed instructions off of mobilemag and of course I can't place the link in this post.
I literally just had same issue... holing power button for 20+ seconds did the trick here.
Running CM7 w/ MAC address fix.
mine's bricked too
I also have a bricked Kindle and not sure what to do about it.
I had my KF rooted and working. Then, I followed these instructions to get a better keyboard. In short, I edited one row of the secure table in settings.db, trying to enable Hackers Keyboard. I followed the instructions very carefully, including changing permissions. When I rebooted, it stuck at the kindle fire logo, and it is still stuck there.
I can connect via adb, but can no longer burrito root. Can't run 'su'. I'm searching these forums trying to figure what to do next.
do you have twrp available ?
if not you could follow this post: http://forum.xda-developers.com/showthread.php?t=1414832
fixed
Thanks. I found that thread via http://forum.xda-developers.com/showthread.php?t=1356257&page=61 and it saved the day.
I was able to fastboot, twrp, and eventually solve my problem.
I had updated settings.db, then used `adb push` to put it in the right place. Then, I chmod-ed it as the instructions warned. However, it was owned by root not system! With twrd, I was able to get back into adb. Chown-ing and chgrp-ing that file to system solved my problem.
(Unfortunately some of the other stuff I did along the way broke a few apps... anyway I'm happy to have a working KF again.)
good to hear !!!
Did you ever get your KF to work? I can not get mine to turn on after KFU 0.9.5 used to do perm root. Now nothing works at all
Kindle fire wont power on /boot
I'm facing the same issue here, i have FFF 1.4a and TWRP 2.2.2.1 installed and JB 4.2.1 from twv. However i noticed whenever i pressed reboot from menu or power it off, i cannot turn it on again.
Luckily i have an OTG cable which help me force boot it, but i want to solve the issue coz i dont want to use the OTG cable always to turn it on.
Note: Holding power button for 20secs did not solve the issue
hi vertcam9 how do you force boot it please.
omniac
omniac said:
hi vertcam9 how do you force boot it please.
omniac
Click to expand...
Click to collapse
Hello, i have a Factory Cable (USB cable) with a different pin configuration. Basically if you have a working bootloader, you just plug it in (with a PC) and it will go to the FFF screen.
I think my issue is a busted USB port already.
ok thanks tried that, but it is deader than that.
omniac
Dead is right on the mark for mine also. With pc never detecting my CM9 , I updated my TWRP to v2.2.2.1, in hopes to go to CM10
And for first time saw *bootloader* as an option in TWRP . Screeching halt!!! Beware.
Seriously people...
vertcam9 said:
I'm facing the same issue here, i have FFF 1.4a and TWRP 2.2.2.1 installed and JB 4.2.1 from twv. However i noticed whenever i pressed reboot from menu or power it off, i cannot turn it on again.
Luckily i have an OTG cable which help me force boot it, but i want to solve the issue coz i dont want to use the OTG cable always to turn it on.
Note: Holding power button for 20secs did not solve the issue
Click to expand...
Click to collapse
vertcam9 said:
Hello, i have a Factory Cable (USB cable) with a different pin configuration. Basically if you have a working bootloader, you just plug it in (with a PC) and it will go to the FFF screen.
Click to expand...
Click to collapse
Normally I would assume you had a 2nd generation device and tried to modify it, but I see your first post was made back in April and then edited two days ago?!? Is this a new problem or the same problem you had eight months ago?
I'm pretty sure your USB port isn't bad and you just have a broken bootloader. If you have a 1st generation device, the Firekit w/shorting trick to put the device in USBboot will do the trick.
omniac said:
hi vertcam9 how do you force boot it please.
omniac
Click to expand...
Click to collapse
omniac said:
ok thanks tried that, but it is deader than that.
omniac
Click to expand...
Click to collapse
How about some details...better yet, start a new thread...In the Q&A section.
Smmoph said:
Dead is right on the mark for mine also. With pc never detecting my CM9 , I updated my TWRP to v2.2.2.1, in hopes to go to CM10
And for first time saw *bootloader* as an option in TWRP . Screeching halt!!! Beware.
Click to expand...
Click to collapse
This sounds like a completely different problem. You should probably start a new thread as well...In the Q&A section.
I have the exact same problem!!!!!!!!!
After I rooted my kindle, everything was going fine. My kindle turned off and when I rebooted, it got stuck in a bootloop. I tried to fix it by reflashing a fresh image and out of nowhere it refuses to start. Absolutely nothing shows up at all. The screen doesn't come on, the logo, nothing. The battery was at 75% when it was working.
This has been the problem since 5 months...
I am using a kindle fire 5th generation and don't have a factory cable.
Can somebody plz help!!!!!!!!!!!!
If so, can someone post a link for a cheap factory cable however I really don't want to use/buy one.
Thanks!
samiultahir said:
I have the exact same problem!!!!!!!!!
After I rooted my kindle, everything was going fine. My kindle turned off and when I rebooted, it got stuck in a bootloop. I tried to fix it by reflashing a fresh image and out of nowhere it refuses to start. Absolutely nothing shows up at all. The screen doesn't come on, the logo, nothing. The battery was at 75% when it was working.
This has been the problem since 5 months...
I am using a kindle fire 5th generation and don't have a factory cable.
Can somebody plz help!!!!!!!!!!!!
If so, can someone post a link for a cheap factory cable however I really don't want to use/buy one.
Thanks!
Click to expand...
Click to collapse
this is only for Kindle Fire 1 (2011)
there is a separate section for your device see
Fire Index: Which Amazon (Kindle) Fire Do I have?
for correct forum link
Sent from my XT1028 using XDA Labs
sd_shadow said:
this is only for Kindle Fire 1 (2011)
there is a separate section for your device see
Fire Index: Which Amazon (Kindle) Fire Do I have?
for correct forum link
Sent from my XT1028 using XDA Labs
Click to expand...
Click to collapse
Oh Thanks Anyways but do you know a fix for this?
BTW I think my device is hard bricked. :crying:
samiultahir said:
Oh Thanks Anyways but do you know a fix for this?
BTW I think my device is hard bricked. :crying:
Click to expand...
Click to collapse
post in the correct forum
Sent from my sailfish using XDA Labs
Hey guys, I'm not sure how I got my Kindle stuck in a boot loop, but I need some help getting it out. I have this thread http://forum.xda-developers.com/showthread.php?t=1399889 for unbricking. The problem I run into is that for some reason the utility wont show my device at all. In my device manager on my computer it shows the kindle as Amazon with the yellow triangle. I have tried everything I could find to get my computer and thus the utility used in the above thread to pick it up and get it out of the boot loop. In case you need to know the ROM I tried to flash before I had this issue can be found here http://forum.xda-developers.com/showthread.php?t=1614004 .
Exact same issue doesn't connect to computer
Sent from my iPhone using Tapatalk
Bahamutmaester said:
Hey guys, I'm not sure how I got my Kindle stuck in a boot loop, but I need some help getting it out. I have this thread http://forum.xda-developers.com/showthread.php?t=1399889 for unbricking. The problem I run into is that for some reason the utility wont show my device at all. In my device manager on my computer it shows the kindle as Amazon with the yellow triangle. I have tried everything I could find to get my computer and thus the utility used in the above thread to pick it up and get it out of the boot loop. In case you need to know the ROM I tried to flash before I had this issue can be found here http://forum.xda-developers.com/showthread.php?t=1614004 .
Click to expand...
Click to collapse
ncvikingx97 said:
Exact same issue doesn't connect to computer
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
If you are getting stuck at the ROM's bootanimation and it won't go any further, your system software is broken. You'll have to get to recovery or at least into fastboot mode to fix it. If you have the stock bootloader, you have no easy way to get into recovery, so you'll probably need a factory cable. Read this...
http://forum.xda-developers.com/showthread.php?t=1668159
This probably won't hurt either...
http://forum.xda-developers.com/showthread.php?t=1552547
Thanks
Just contacted amazon about getting a new factory cable. Also, as much as I hate to admit it, I could probably use that guide
ncvikingx97 said:
Just contacted amazon about getting a new factory cable. Also, as much as I hate to admit it, I could probably use that guide
Click to expand...
Click to collapse
I hope you are joking...
http://forum.xda-developers.com/showthread.php?t=1550999
didn't work
Okay so I plugged my kindle in with a samsung charger I had, and it turned on when I plugged it in. Now it is plugged in, and it can't get past the kindle fire logo. What should I do? The computer doesn't recognize it either
ncvikingx97 said:
Okay so I plugged my kindle in with a samsung charger I had, and it turned on when I plugged it in. Now it is plugged in, and it can't get past the kindle fire logo. What should I do? The computer doesn't recognize it either
Click to expand...
Click to collapse
Download in use Kindle Fire Utility from the development section. Use it install window driver for KF, install TWRP, and reset boot mode. It is the tool for you. You just need to study how to use it.
Hope it helps.
SEARCH BEFORE POSTING Has been honored. I couldn't find anything like my problem after a few hours searching.
My friend gave me his Kindle Fire to root a few days ago. I thought, no problem, I've rooted mine already anyway. I factory reset, plug the thing in and download KFU V6. Start the software, and... nothing. It didn't work. I don't know why. I tried it over 9000 times and it would not root the device, so I tried a different root method from rootkindlefire.com. I started it up and everything seemed to be working fine... at first. The program rebooted my Fire like normal, but it was stuck at the stock kindlefire boot logo for at least half an hour. I unplugged it and turned it off, and things went downhill from there. All it does now is boot into a yellow triangle with a flame in the middle (FireFireFire?). TWRP didn't install, so when I press the power button to boot into recovery, nothing happens. When I plug it into my Windows 7 machine, it says "USB Device Not Recognized". I don't know what to do!
You need to take it out of fast-boot mode.
Sent from my Kindle Fire using Xparent Blue Tapatalk 2
AlphaKill said:
You need to take it out of fast-boot mode.
Sent from my Kindle Fire using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
How? I can't boot into recovery, and I can't do anything on my PC because no programs know the device is even connected.
Josepho1997 said:
You couldn't find this problem after hours of searching? Every 1 in 3 threads in Q&A are about this exact problem. Stuck on fastboot, device not reconized, ect.
I'm just going to say this:
1)You have an out-dated root method as you have an older version of fff(the bootloader)
2)http://forum.xda-developers.com/showthread.php?t=1850038
3)http://forum.xda-developers.com/showthread.php?t=1552547
Sent from my Kindle Fire using xda premium
Click to expand...
Click to collapse
No. I can't use Soupkit because no computer recognizes the device. It just says "waiting for device" or "device not found". I've rebooted the computer, uninstalled drivers etc., but nothing works.
Sorry. I guess I assumed Soupkit did the same thing as KFU. Guess I'll reinstall Ubuntu now...
Sent from my MB865 using Tapatalk 2
Just give him your kf. Problem solved!
Sent from my Amazon Kindle Fire using Tapatalk 2
Ok I know tons of people think they have bricked their device, but usually it is just a soft brick....hopefully I am the same. I tried to root my kindle fire using KFU. Something happened, it didn't work. Now it just stays on the boot screen. In windows it isn't recognized, I have read the forums and know to reinstall the drivers, but I can't because Windows recognizes it as an unknown device, (code 43), so they won't install. I have tried using the unbrick utility, but it doesn't work since windows isn't recognizing the device. I have a mac too that won't recognize it, at least I don't think it does. Maybe there is a way to get the drivers installed I am missing, but I tried following all of the tutorials here, and its not wokring. Is it possible that I can still fix it, or is it done. Thanks for any help.
DIRKxxxDIGGLER said:
Ok I know tons of people think they have bricked their device, but usually it is just a soft brick....hopefully I am the same. I tried to root my kindle fire using KFU. Something happened, it didn't work. Now it just stays on the boot screen. In windows it isn't recognized, I have read the forums and know to reinstall the drivers, but I can't because Windows recognizes it as an unknown device, (code 43), so they won't install. I have tried using the unbrick utility, but it doesn't work since windows isn't recognizing the device. I have a mac too that won't recognize it, at least I don't think it does. Maybe there is a way to get the drivers installed I am missing, but I tried following all of the tutorials here, and its not wokring. Is it possible that I can still fix it, or is it done. Thanks for any help.
Click to expand...
Click to collapse
Is it a 1st Gen Kindle Fire or 2nd? If it's a 2nd Gen you "might" be in trouble
Sent from my Fire Kindling A-Pad
guitarman2010 said:
Is it a 1st Gen Kindle Fire or 2nd? If it's a 2nd Gen you "might" be in trouble
Sent from my Fire Kindling A-Pad
Click to expand...
Click to collapse
Its first generation...
DIRKxxxDIGGLER said:
Its first generation...
Click to expand...
Click to collapse
In most cases I've seen of Windows complaining of an unknown device, it seems to be a problem with the bootloader. The fact that you can't even get it to accept commands from the Mac leads me to believe it is the same in your case.
You'll likely need to put the device in USBboot ("shorting trick") and install a working bootloader with Firekit.
"That's a special kind of stupid. The kind that makes me laugh."
What Soup said will work. This is what I did, as I was having the same problem as you.
1. Turn off your KF
2. peel off back cover from KF.
3. Make sure the A side of the usb cable is plugged in to your PC.
4. Find the short spot and put something there like a small screw driver point or a paper clip.
Here's a link to the picture. http://forum.xda-developers.com/showpost.php?p=19762674&postcount=51
5. While you have your metal on the short spot turn on the KF.
6. After about 20 seconds or so Windows will now recognize it. Use KFU to put it in recovery mode, installing Fire, ETC.
Thanks guys, I'll try that when I get home from work today and report back.
Sent from my SAMSUNG-SGH-I747 using xda premium
Thanks for your help, it's up and working now with stock kernel and rom. Really appreciate your help!
Sent from my SAMSUNG-SGH-I747 using xda premium
Relikk356 said:
What Soup said will work. This is what I did, as I was having the same problem as you.
1. Turn off your KF
2. peel off back cover from KF.
3. Make sure the A side of the usb cable is plugged in to your PC.
4. Find the short spot and put something there like a small screw driver point or a paper clip.
Here's a link to the picture. http://forum.xda-developers.com/showpost.php?p=19762674&postcount=51
5. While you have your metal on the short spot turn on the KF.
6. After about 20 seconds or so Windows will now recognize it. Use KFU to put it in recovery mode, installing Fire, ETC.
Click to expand...
Click to collapse
I having the same problem but for Kindle fire hd 7". I tried to use both stock cable and factory cable but it didn't work anyway. Any solution? please help me. Thank you
Hi. So the other day I installed TWRP on my Kindle Fire successfully. The KF was at 10.2.6, I'm not sure if that means it's a Kindle Fire 2 or not. Anyways, when I went to flash FFF, I stupidly flashed the .zip as a bootloader, thus making my Kindle Fire completely unusable. When I press the power button, nothing at all happens. Nothing I do will make the screen turn on or the power button to flash in any way. I've tried using Firekit with usbboot and the shorting trick, but that hasn't worked for me. (I just installed stock Ubuntu to a flash drive with the fk file on root, I'm fairly certain that's all that needed to be done?)
Anyways, my Kindle is unresponsove, and the usbboot trick has yet to work for me. I really want to save this guy. I've heard the KF cannot be completely bricked through software/flashing. I hope it's true! Any help would be greatly appreciated. Thank you.
if that is your software version then yes you have kindle fire 2, i'd wait for someone with more experience on here to post, but it sounds to me like you are going to need a factory cable
chris_m128 said:
if that is your software version then yes you have kindle fire 2, i'd wait for someone with more experience on here to post, but it sounds to me like you are going to need a factory cable
Click to expand...
Click to collapse
Thanks fro replying. I'm pretty sure a factory cable only puts it into fastboot if you have a working bootloader. I don't, so I don't think it would work.
I remember an instance where a friend of mine had a broken bootloader, and we used a factory cable to restore it, this was on the kindle fire. we had to first reflash the bootloader. I hope this is possible here.
---------- Post added at 11:59 AM ---------- Previous post was at 11:58 AM ----------
but you'll have to ask someone with more experience than me sorry.
jophish said:
Hi. So the other day I installed TWRP on my Kindle Fire successfully. The KF was at 10.2.6, I'm not sure if that means it's a Kindle Fire 2 or not. Anyways, when I went to flash FFF, I stupidly flashed the .zip as a bootloader, thus making my Kindle Fire completely unusable. When I press the power button, nothing at all happens. Nothing I do will make the screen turn on or the power button to flash in any way. I've tried using Firekit with usbboot and the shorting trick, but that hasn't worked for me.
Click to expand...
Click to collapse
I think you need a Factory cable to recover.
If you connect the Kindle to the PC and try adb devices in a terminal window, what do you see?
From the software version, you have KF2, as such you need to use the tools and ROMs from the KF2 threads. You could try to use the one click freedom boot and TWRP installer, to see if you can get that on.
From there you would probably have to push one of the 10.1 ROMs on, or the 10.2.6 recovery image, and then start again.
This seems to be happening a lot, and could be avoided if people read a bit more before using the wrong tools.
Sent from my Amazon Kindle Fire2 using Tapatalk HD
chronicfathead said:
I think you need a Factory cable to recover.
If you connect the Kindle to the PC and try adb devices in a terminal window, what do you see?
From the software version, you have KF2, as such you need to use the tools and ROMs from the KF2 threads. You could try to use the one click freedom boot and TWRP installer, to see if you can get that on.
Click to expand...
Click to collapse
Howdy. I just fashioned a factory cable, just jumping +5V to pin 4, right? It seems to be doing absolutely nothing. No lights or anything are turning on. The freedom boot just spits out "error: device not found" and hangs on "Pushing Stack". Again, I was under the impression that the factory cable only made it boot in fastboot if you already have a working bootloader. I'll try loading into Ubuntu and see what it says in terminal. Thanks
EDIT: So, when I type adb devices into terminal, I get:
The program 'adb' is currently not installed. You can install it by typing:
sudo apt-get install android-tools-adb
You will have to enable the component called 'universe'
Could this have been my problem to begin with?
EDIT 2: Well, I installed ADB. There are no devices found when I enter that command, and the shorting trick with still doesn't work. Ugh.
jophish said:
Howdy. I just fashioned a factory cable, just jumping +5V to pin 4, right? It seems to be doing absolutely nothing. No lights or anything are turning on. The freedom boot just spits out "error: device not found" and hangs on "Pushing Stack". Again, I was under the impression that the factory cable only made it boot in fastboot if you already have a working bootloader. I'll try loading into Ubuntu and see what it says in terminal. Thanks
EDIT: So, when I type adb devices into terminal, I get:
The program 'adb' is currently not installed. You can install it by typing:
sudo apt-get install android-tools-adb
You will have to enable the component called 'universe'
Could this have been my problem to begin with?
EDIT 2: Well, I installed ADB. There are no devices found when I enter that command, and the shorting trick with still doesn't work. Ugh.
Click to expand...
Click to collapse
Leave your Kindle plugged in for an hour using the normal cable, as it may be totally flat.
The attached diagram shows what pins need joining. If you can, make sure none of the other pins are shorting.
Hold the power button for 20 seconds, plug in your fastboot cable, power on the Kindle.
You should see some traffic lights on the screen.
If you can get fastboot enabled, you should be able to push the correct partitions back on using the partitions from the factory restore image, your backup files or from the recovery thread. Hope you get it running.
Sent from my Amazon Kindle Fire2 using Tapatalk HD
chronicfathead said:
Leave your Kindle plugged in for an hour using the normal cable, as it may be totally flat.
The attached diagram shows what pins need joining. If you can, make sure none of the other pins are shorting.
Hold the power button for 20 seconds, plug in your fastboot cable, power on the Kindle.
You should see some traffic lights on the screen.
If you can get fastboot enabled, you should be able to push the correct partitions back on using the partitions from the factory restore image, your backup files or from the recovery thread. Hope you get it running.
Sent from my Amazon Kindle Fire2 using Tapatalk HD
Click to expand...
Click to collapse
I tried the fastboot cable out on a working Kindle Fire, and it worked correctly, so I did wire it right. I did as you said, holding the power button down and then plugging in the cable, and nothing happens still on the KF2. I have access to the insides, should I unplug the battery? It should be around 85% charged. Thanks again.
Edit: BIG NEWS~ Not really. When I plug the Kindle Fire with the fastboot cable into Windows, it appears under Device Manager as "Unknown Device" with a yellow triangle, but nothing shows up on the Kindle, no lights or anything. Hmph.
jophish said:
I tried the fastboot cable out on a working Kindle Fire, and it worked correctly, so I did wire it right. I did as you said, holding the power button down and then plugging in the cable, and nothing happens still on the KF2. I have access to the insides, should I unplug the battery? It should be around 85% charged. Thanks again.
Edit: BIG NEWS~ Not really. When I plug the Kindle Fire with the fastboot cable into Windows, it appears under Device Manager as "Unknown Device" with a yellow triangle, but nothing shows up on the Kindle, no lights or anything. Hmph.
Click to expand...
Click to collapse
You could have tried sending it back to Amazon, but you say you have opened it.
Sent from my Amazon Kindle Fire2 using Tapatalk HD
chronicfathead said:
You could have tried sending it back to Amazon, but you say you have opened it.
Sent from my Amazon Kindle Fire2 using Tapatalk HD
Click to expand...
Click to collapse
Urgh. I closed it up. Is there any way they'd know if I'd opened it?
I'm in exactly the same boat as you, also flashed FFF (by accident) on my device. Haven't been able to fix it yet but I do have a factory cable. Also did the USB trick, but that didn't have an effect either.
chronicfathead said:
I think you need a Factory cable to recover.
If you connect the Kindle to the PC and try adb devices in a terminal window, what do you see?
From the software version, you have KF2, as such you need to use the tools and ROMs from the KF2 threads. You could try to use the one click freedom boot and TWRP installer, to see if you can get that on.
From there you would probably have to push one of the 10.1 ROMs on, or the 10.2.6 recovery image, and then start again.
This seems to be happening a lot, and could be avoided if people read a bit more before using the wrong tools.
Sent from my Amazon Kindle Fire2 using Tapatalk HD
Click to expand...
Click to collapse
In my case, I did by accident because it wasn't clear to me which KF generation I had (I've bricked mine just after christmas). These forums were not really clear either, I had a Kindle Fire so I just looked for a KF guide. After I bricked it I found out my device was a second generation Kindle Fire.
plinders said:
I'm in exactly the same boat as you, also flashed FFF (by accident) on my device. Haven't been able to fix it yet but I do have a factory cable. Also did the USB trick, but that didn't have an effect either.
In my case, I did by accident because it wasn't clear to me which KF generation I had (I've bricked mine just after christmas). These forums were not really clear either, I had a Kindle Fire so I just looked for a KF guide. After I bricked it I found out my device was a second generation Kindle Fire.
Click to expand...
Click to collapse
Hi, to clarify: you cannot boot into TWRP? No logos at boot at all? No boot?
I would send it back to Amazon...
Same Here..
I was thinking that all kindle fire are the same... installed fire fire fire using KFU and device got bricked....!
Hope someone here could help us get our devices up and running again...
yudanjah said:
Hi, to clarify: you cannot boot into TWRP? No logos at boot at all? No boot?
I would send it back to Amazon...
Click to expand...
Click to collapse
Nothing whatsoever.
I can't really send it back to Amazon, because of two reasons:
1) I already opened up the back
2) It was gifted to me from the US, and there is no Dutch Amazon, so I'd have to send the device back to the person who gifted to me, that person has to mail it to Amazon from there, and the replacement device has to come back the same way (via that person). That's not a situation I'd like to put that person in.
jophish said:
Urgh. I closed it up. Is there any way they'd know if I'd opened it?
Click to expand...
Click to collapse
I am sure they can figure it out. Can you boot into TWRP?
If so, you can still recover...
Dame problem
plinders said:
Nothing whatsoever.
I can't really send it back to Amazon, because of two reasons:
1) I already opened up the back
2) It was gifted to me from the US, and there is no Dutch Amazon, so I'd have to send the device back to the person who gifted to me, that person has to mail it to Amazon from there, and the replacement device has to come back the same way (via that person). That's not a situation I'd like to put that person in.
Click to expand...
Click to collapse
Same problem dude, did you fix it?
i.robert said:
Same problem dude, did you fix it?
Click to expand...
Click to collapse
Not yet I'm afraid. Everything I tried so far hasn't worked.
yudanjah said:
Hi, to clarify: you cannot boot into TWRP? No logos at boot at all? No boot?
I would send it back to Amazon...
Click to expand...
Click to collapse
No, Absolutely nothing. I really would like to get this working.
jophish said:
No, Absolutely nothing. I really would like to get this working.
Click to expand...
Click to collapse
same here we need a new firekit for the kf2
Help..
any updates on the fix? I hope someone out there could help us revive our bricked kindle fire 2... :angel:
kindle fire 2
flashed wrong bootloader (fff)
no power
no lights
no adb
shorting trick is not working for me :crying: