[Q] LTE SIM inserted, but "Insert SIM Card to access Data Services" message shows
Hi,
I'm in the Philippines. I bought a Note N7105 last week (not from my provider) and installed 4.1.2 with baseband N7105DXDLL1. All good until a few days ago I received my LTE card from GLOBE Telcom.
Now I have a problem. I can make calls and send SMS using the card but when I try to enable data services it tells me "Insert SIM Card to access Data Services", and will not enable data or let me see anything under "Mobile Networks".
I have tried a different Globe LTE SIM card (my son's) and the same thing happens.
If I put this LTE SIM into my Galaxy S II (Baseband = I9100XXLPX), it runs fine (but 3G of course). So it's not a faulty SIM card.
I was wondering if the problem might be the modem ? Any ideas ?
Globe runs LTE Band 1800
thanks
Could it be the modem ?
djlane1 said:
Hi,
I'm in the Philippines. I bought a Note N7105 last week (not from my provider) and installed 4.1.2 with baseband N7105DXDLL1. All good until a few days ago I received my LTE card from GLOBE Telcom.
Now I have a problem. I can make calls and send SMS using the card but when I try to enable data services it tells me "Insert SIM Card to access Data Services", and will not enable data or let me see anything under "Mobile Networks".
I have tried a different Globe LTE SIM card (my son's) and the same thing happens.
If I put this LTE SIM into my Galaxy S II (Baseband = I9100XXLPX), it runs fine (but 3G of course). So it's not a faulty SIM card.
I was wondering if the problem might be the modem ? Any ideas ?
Globe runs LTE Band 1800
thanks
Click to expand...
Click to collapse
Anybody ? Could it have anything to do with the modem or am i barking up the wrong tree ?
Re: [Q] LTE SIM inserted, but "Insert SIM Card to access Data Services" message shows
Looks like apn related
Sent from my GT-N7100 using xda app-developers app
Re: [Q] LTE SIM inserted, but "Insert SIM Card to access Data Services" message shows
Have you try changing network mode under settings - wireless (more) - mobile network - network mode
If you set it to utms/wcdma doest it works?
(Sorry I just assuming and here in India we don't have lte and never seen menu of mobile network in lte version)
Sent from my GT-N7100 using xda premium
Re: [Q] LTE SIM inserted, but "Insert SIM Card to access Data Services" message shows
dr.ketan said:
Have you try changing network mode under settings - wireless (more) - mobile network - network mode
If you set it to utms/wcdma doest it works?
Click to expand...
Click to collapse
When the SIM is inserted, the whole mobile settings menu becomes unavailable, because the phone thinks no SIM is inserted (even though calls and SMS works).
UtkarshGupta suggests its the APN not the modem so I'll look into that too.
For now, I have a new problem - the SIM slot is broken, due to using one of those stupid Nano adapters, because my provider does not have micro SIMs. So until I get that replaced, I can't try anything !
Re: [Q] LTE SIM inserted, but "Insert SIM Card to access Data Services" message shows
Yeah could be modem as well
Sent from my GT-N7100 using xda app-developers app
djlane1 said:
Hi,
I'm in the Philippines. I bought a Note N7105 last week (not from my provider) and installed 4.1.2 with baseband N7105DXDLL1. All good until a few days ago I received my LTE card from GLOBE Telcom.
Now I have a problem. I can make calls and send SMS using the card but when I try to enable data services it tells me "Insert SIM Card to access Data Services", and will not enable data or let me see anything under "Mobile Networks".
I have tried a different Globe LTE SIM card (my son's) and the same thing happens.
If I put this LTE SIM into my Galaxy S II (Baseband = I9100XXLPX), it runs fine (but 3G of course). So it's not a faulty SIM card.
I was wondering if the problem might be the modem ? Any ideas ?
Globe runs LTE Band 1800
thanks
Click to expand...
Click to collapse
Hi
I'm from the philippines just as you. I'm also using globe's LTE and recently have bought a note 2 (N7105). My note 2 works perfectly. But a few days ago, my friend who was interested in getting the same phone that I have, decided to buy one. We went to the same store hot gadgets to buy another phone exactly like mine N7105. We encountered the same problem as you. All other simcards would work except for my Globe LTE sim. It seems like its a new batch of note 2s from their supplier abroad. What i noticed about the new batch that arrived is that it was previously locked to a foreign network and just unlocked. the box also has a "cityzi" logo which is a carrier in france. the seller claims that all their units are locked and just unlocked.
but i believe that the batch i got was factory unlocked in the first place because there is no logo on the box and no logo when starting up and turning off the phone.
I have a feeling that it may be a firmware related problem. what i would like to ask if you have tried updating the phone to the current DMC3 firmware. you can read up about it.
there is a forum on tipid cp on n7105 sadly im just a new user on xda so i cant post the link. just search for it.
if you check sammobile.com there is an n7105 firmware for the philippines. im not sure if flashing it with this new firm ware would fix the problem. i flashed my phone with it and it worked fine but im not sure if a previously locked phone would create problems when updating firmware. maybe some people in the forum could help. thanks.
jarojas714 said:
I have a feeling that it may be a firmware related problem. what i would like to ask if you have tried updating the phone to the current DMC3 firmware. you can read up about it.
there is a forum on tipid cp on n7105 sadly im just a new user on xda so i cant post the link. just search for it.
if you check sammobile.com there is an n7105 firmware for the philippines. im not sure if flashing it with this new firm ware would fix the problem. i flashed my phone with it and it worked fine but im not sure if a previously locked phone would create problems when updating firmware. maybe some people in the forum could help. thanks.
Click to expand...
Click to collapse
Hi, Yes I flashed the firmware N7105XXDMC3_N7105OLBDMD1_GLB and now my note 2 works fine with Globe LTE. I found details on this site http://wccftech.com/update-galaxy-note-2-lte-n7105-xxdmc3-android-412-jelly-bean-official-firmware/
hi bro. i really really need your help
hi i really need ur help in regards to my s3 i bought it in singapore pero halos lahat ng alam kong s3 na nakakasagap ng lte e yung may antenna sakin ala pero active na lte sim . pls txt me i really nid ur help kahit pay kita pag natulingan koko ive been looking for help for months. dem name ko txt me please ill wait 09175803025
dbval8 said:
hi i really need ur help in regards to my s3 i bought it in singapore pero halos lahat ng alam kong s3 na nakakasagap ng lte e yung may antenna sakin ala pero active na lte sim . pls txt me i really nid ur help kahit pay kita pag natulingan koko ive been looking for help for months. dem name ko txt me please ill wait 09175803025
Click to expand...
Click to collapse
This is an English only forum. Ask in English if you want an answer. Also, this section is for the Note 2. Ask again in the S3 section, in English.
Worked like a charm. Thanks!
big thanks to this thread! i had problems with my N7105 from HK as well but now it works fine on Globe LTE!
only problem i encountered was downloading the file which was 1GB, kept failing to download until this morning hehehe. :highfive:
Hi everyone. Might there be a torrent for the firmware file? Download keep terminating on my side. Thanks guys
Hi!
First I want to thank you for pointing out that only XXDMC3 will work with GLOBE LTE.
I think it is the SIM card itself because I have an AT&T i317 Galaxy note 2. First I wasn't able to get it to work. Same issues with you. Can call, text, but will not allow me to access mobile services.
I also tried flashing it with the modem from here (XXDMC3 (Philippines / Globe) N7105DXDMC1_modem_GLB) you can use this modem if you have the N7105
I misread the instructions and had a bootloop. But was able to reflash the stock AT&t firmware.
So instead of going that route, I downloaded this International ROM for ATT Galaxy note 2 As it is already XXDMC3 baseband.
It works very well. But I still have to wait for the activation of my LTE to see if that really works. But now I can access the menu's and H+ works on my phone.
This is using the Stock AT&T Modem.
I hope this helps folks with international phones and want it to work with GLOBE LTE.. =)
This firmware works fine with globe, but not so sure about Smart. A Smart prepaid SIM works fine, but a postpaid SIM does not work at all, not even for calling / texting. Smart are unable to explain why this would be the case. They made up some BS story about the phone being locked to Globe (a 7105 International edition !!) I was not able to test it fully because I sold the phone, so I can't say for sure it was a firmware issue. But we tried several Smart postpaid SIMS and all did not work. Just throwing it out there.
Hello,
I have searched throughly for my questions but didn't find anything unfortunately...
Will the tab 3 SM-T217S be able to make calls? I am talking regular calls not using apps that use data.
I live in a country where there is CDMA network provider and heard that there is no dialer on this tab which is important for me to programme the tab into my country's CDMA network provider.
I also came across a forum where it said the call functionality is there in the tab 3 but sprint has blocked it because the will only give you a plan with data not voice, so does that mean that if the SM-T217S gets programmed to another CDMA provider the call functionality can work normally??
I appreciate any help guys and thanks in advance!
Yafi3i said:
Hello,
I have searched throughly for my questions but didn't find anything unfortunately...
Will the tab 3 SM-T217S be able to make calls? I am talking regular calls not using apps that use data.
I live in a country where there is CDMA network provider and heard that there is no dialer on this tab which is important for me to programme the tab into my country's CDMA network provider.
I also came across a forum where it said the call functionality is there in the tab 3 but sprint has blocked it because the will only give you a plan with data not voice, so does that mean that if the SM-T217S gets programmed to another CDMA provider the call functionality can work normally??
I appreciate any help guys and thanks in advance!
Click to expand...
Click to collapse
Hey, i was about to purchase this to flash to IUSACELL Mexico, but instead went with the ATT version with SIM card because i have a better data plan with GSM provider than CDMA provider.
But i did some research prior going with the gsm tablet, and it appears you can flash it with DFS cdma soft, and of course if the new plan has DATA/VOICE it should work like a phone and sms and all that, providing you download a dialer and use an external hands free headset (i dont think it has a speaker like the GT3 8").
You wont find much information, all has to be done with trial and error.
Hello guys, I have HTC ONE_M8 INTERNATIONAL VERSION / UNLOCKED VERSION. I want to use VoLTE but m unable to do so. I have a 4g sim and as soon as I turn on LTE only mode I get 4g Internet access but then m unable to call someone or recieve any calls, its rooted so I need some method to enable volte so that I can connect as well as make calls. Any help would be appreciated. Thank you
What region/country and what carrier?
I don't know a lot about VoLTE, and its pretty new in a lot of regions. But from what I've seen at least in the US (AT&T) they are doing some very carrier specific deployment of VoLTE which doesn't play well with any non-carrier branded ROM.
I also have an International Version of the M8. My carrier just activated VoLTE on their side and say I have to activate it on the settings but I dont see that option anywhere on the settings.
Can someone please help? Is there a workaround?
Cheers
Badelhas said:
I also have an International Version of the M8. My carrier just activated VoLTE on their side and say I have to activate it on the settings but I dont see that option anywhere on the settings.
Can someone please help? Is there a workaround?
Cheers
Click to expand...
Click to collapse
Please don't make multiple posts of the same question.
Hello everyone, I am French and I live in France, I bought on the Internet (Amazon) a note 4 thinking that it would be made for France. I received a note 4 with reference N910A, so a phone that is done normally for the USA. On my phone I have android kitkat 4.4.4 and no recent android version is available when I ask for the update. With my phone I have all AT & T applications that do not serve in France. I can call and send SMS, but I can not send mms. I would like to know how I can install a newer version of Android still being able to continue to use my note 4 in France, please.
to upgrade the software you need to follow the directions in the thread below
http://forum.xda-developers.com/note-4-att/general/marshmellow-att-server-link-installation-t3407308
for MMS to work you probably need to adjust some setting on your phone. If you call your carrier they should be able to help you put in the correct MMS setting. You shoudl also check if the internet is working so they can help you with that was well if its an issue.
If you can get an AT&T sim card or AT&T MVNO's sim card, like H20 wireless, insert the sim card into your phone and probably can get update from AT&T(of course the phone need to be able to access the internet), at least it works in US. The MMS issue depends on your carrier, you need to ask your carrier how to set the phone to get MMS works.
Hello to XDA community, as for the title let me clarify on my problem.
Recently I bought a used Samsung S6 SM-G920P from a shop. Then I realise that its a CDMA USA version, it cant receive 4G/LTE network in my country ( Malaysia / Asia ) but it can receive the 3G network. I really want to enable the 4G network, what must I do? Perhaps unlocking the network band or anything? Im lost
Thanks for advance.
Otomen said:
Hello to XDA community, as for the title let me clarify on my problem.
Recently I bought a used Samsung S6 SM-G920P from a shop. Then I realise that its a CDMA USA version, it cant receive 4G/LTE network in my country ( Malaysia / Asia ) but it can receive the 3G network. I really want to enable the 4G network, what must I do? Perhaps unlocking the network band or anything? Im lost
Thanks for advance.
Click to expand...
Click to collapse
bro i have same issue i am in europe so onlz 3g i tried to flash us international csc thinking that i will get 4g but i domesticlz locked mz phone,backup cant help there is no way other than paying to unlock it .i dont know what to do but i foun setting in test mode that enables gsm lte mode or cdma network mode it opens when you dail something but i got it with idone 3.1.8 wich you can download and it had free sim uicc unlock but it doesnt anymore it is a paid service now and costs 35$ ,so far i havent found any modems or sth liek that but you can try that hidden test meny think that i found out accidentaly and im rely sad taht i havent found it erlier before i locked it ....good luck man
unlock remotely ,this is permanent unlock
something like this
https://www.ebay.com/itm/REMOTE-UNL...e-S7-S6-Edge-S6-Note-5-7-0-FAST/152592772959?
hash=item23873cef5f:g:3sQAAOSwz71ZSJKG
than purchase
BK Package Disabler apk it is about $2
(Samsung) pro
to disable Sprint activation screen