Develop Bugs

[Q] Now that I hard bricked my GSII...

I have hard bricked my phone. The only thing that even shows activity is the blue LED at the top. I can get over the fact that I did this by flashing a bad ROM (a GSM ROM named incorrectly but still as always, my fault for not being careful). The device does NOT respond to the USB Jig, all it does is turn on that blue LED once again. So now that I am here, I know there is one option which is a JTAG repair by one of the fabulous members here. My question is whether I can just play dumb (I am dumb so it shouldn't be THAT hard) at a Sprint store and claim Kies was updating my phone and my computer did a hard reset.
First, would that be sufficient in bricking an ordinary phone? Second, after applying the Jig, the ODIN counter should be back at 0, is there any way for them to prove that I did it? I'm sure they'll know what I did, but it ain't what'cha know, it's what you can prove. So is this a viable option?
Thanks a million, you guys are the light in my galaxy

Take it into the store, tell em you woke up this morning, pulled it off the charger and this is what it does. Its really that simple.

Would it be over-the-top to do what I described? Simpler is better when it comes to these things?
Edit----
I have to go back to the store that I got the phone from. I just got it last week, signed a new contract. Should I go for the woman that sold me the phone with the aforementioned story, or should I go for a random at the service and support?

I would just say like mentioned earlier that you woke up and this is how your phone was. It won't turn on or anything.

Thanks, I will do that when I go there this morning.

its not hard bricked u just need a jig

drksilenc said:
its not hard bricked u just need a jig
Click to expand...
Click to collapse
Read the OP..he has and attempted to use the jig.
........

Have you tried going into odin mode?
Sent from my SPH-D710

Any update on this? C'mon OP don't leave us hanging!

Any hope for my HARD, yes HARD BRICKED galaxy nexus?

So I recently ****ed my gnex 6 ways from sunday. Im talkin no screen no dl mode no fastboot. NOTHIN, ZILTCH. When plugged into comp i get the noise over and over again as if im removing and repluggin the cord repeatedly. sometimes after 20 minutes of that it will finally show up in device manager as unknown device or OMAP440. but thats rarely and it dont stay long. Im no noob and this seems a clear cut case of a Hard Brick. But I beg of you, PLease prove me wrong. Thanks all.
Got the jig. Yup, this thing is ****ed. Probly gna send it to the big S jus to see what they gotta say. Thanks to all those who helped.

I'm pretty sure there is a usb jig that will force odin mode. If that doesn't work I think you'd be screwed. Here's a video on how to make your own jig. http://www.youtube.com/watch?v=jKRrTZayRxU
Or you can buy one already made for $5.50 US at http://usbjig.com/

What were you flashing when this happened?

a little info on how this happened can help.
Are you unlocked and rooted?
Did you drop the phone?
If you call the phone, does it ring?
In other words, is it your screen that's broken? I recently returned a rooted HTC thunderbolt with a non functioning screen back to stock to take advantage of factory warranty.

Sorry to be vauge. to clear things up;
No, Never Dropped, still looks brand new. Definately not the screen. This things a brick. And I was running a linux installer last i'd seen the phone but i had left it unattended for probably 15 mins or so. Also, heard the jig dont work on these, can anyone elaborate? Thanks

Linux installer? No, what exactly were you doing or flashing?

Thats it. Nothing else was going when i left it

billard412 said:
Thats it. Nothing else was going when i left it
Click to expand...
Click to collapse
I think he meant "What Linux installer?"

Send it to a service center and say "I downloadz app and it won't turn onz"
I can tell you that motorola was good about rooted phones being serviced, not sure about Samsung.
Sent from my francoPhone

billard412 said:
Sorry to be vauge. to clear things up;
No, Never Dropped, still looks brand new. Definately not the screen. This things a brick. And I was running a linux installer last i'd seen the phone but i had left it unattended for probably 15 mins or so. Also, heard the jig dont work on these, can anyone elaborate? Thanks
Click to expand...
Click to collapse
That wasn't much better. You need to tell us step by step exactly what you did leading up to this problem. Be specific as possible.
Sent from my Galaxy Nexus using xda premium

There's multiple reports of the Galaxy S II jig working with the Gnex. I hope this helps. There is a forum on another website I can post the link if you want with a confirmed report of the jig working.
Anyway here's the link to buy the jig $1.60 with free shipping is a pretty good deal to save a $600 phone. http://www.dealextreme.com/p/unbric...msung-t959-i9000-i897-m110s-i8700-i9100-93514
Good Luck

Other than this, w w w . androidzoom.com/android_applications/tools/linux-installer_fuxq_comments.html , the phone was doing nothing else. started the setup process walked awayfor a bit, came back and BRICK.

ChongoDroid said:
Send it to a service center and say "I downloadz app and it won't turn onz"
I can tell you that motorola was good about rooted phones being serviced, not sure about Samsung.
Sent from my francoPhone
Click to expand...
Click to collapse
and this is why we can't have nice things....
this is one of the reasons why phone companies are so against unlocking bootloaders. people screw up their rooted, unlocked phones and then send it back to vzw or the manufacturer to cover the bill.
if you're going to root your phone and mod it, then man up and accept the consequences when you derp it.
not saying the op isn't going to accept full responsibility, but your advice is what's wrong w/ some in this rooted community.

Since the linux installer is only using chroot then one would think that it is simply adding its distro to the system partition then chrooting to start. How this bricked you is puzzling. There's no flashing operation here...
I'm guessing hardware failure. The coincidence is hard to ignore though. However, you weren't there when it actually died so who knows what happened.

i was flashing stock ICS 4.0.4 with Odin and then half way through an error came up. so i removed closed Odin from the PC and tried redoing it. and then it was saying analyzing files.
and so i closed it again and restarted the phone. and what came on the screen was a sign, with a phone dots an exclamation mark dots and a monitor. i think thats when the phones bricked rite? any help?

jaadey said:
i was flashing stock ICS 4.0.4 with Odin and then half way through an error came up. so i removed closed Odin from the PC and tried redoing it. and then it was saying analyzing files.
and so i closed it again and restarted the phone. and what came on the screen was a sign, with a phone dots an exclamation mark dots and a monitor. i think thats when the phones bricked rite? any help?
Click to expand...
Click to collapse
not bricked at all mine did it
happened to me do you have version 1.85 of odin and do you have a propper version of 4.0.4
odin 1.85 here http://forum.xda-developers.com/showthread.php?t=1394051&highlight=odin+stock
the 4.0.4 version i used here http://code.google.com/android/nexus/images.html
i had the same thing on my screen and it all worked fine the second time round.. i tried for a total of 8 hours doing different things but this worked with the latest odin.
make sure you load via the pda Make sure in the ODIN program "Re-Partition", "Phone EFS Clear", and "Phone Bootloader Update" are NOT checked.
hope that works. im a total novice but worked a dream

billard412 said:
Sorry to be vauge. to clear things up;
No, Never Dropped, still looks brand new. Definately not the screen. This things a brick. And I was running a linux installer last i'd seen the phone but i had left it unattended for probably 15 mins or so. Also, heard the jig dont work on these, can anyone elaborate? Thanks
Click to expand...
Click to collapse
The jig DOES work, it IS a brick, and YES, YOU'RE F**KED
Sorry, but I canot say this, any politer ^^
And, please. Don't take me too hard but, I think you are still a n00b ^^
This has nothing to do with you post rate, or anything, like that... But, there IS no Linux installer, for the GNex ^^
BTW, try a battery pull, and leave it for a few hours, before posting anything else... It works wanders ^^ Maybe you just fried your phone, a tiny bit...

h_10 said:
and this is why we can't have nice things....
this is one of the reasons why phone companies are so against unlocking bootloaders. people screw up their rooted, unlocked phones and then send it back to vzw or the manufacturer to cover the bill.
if you're going to root your phone and mod it, then man up and accept the consequences when you derp it.
not saying the op isn't going to accept full responsibility, but your advice is what's wrong w/ some in this rooted community.
Click to expand...
Click to collapse
The nexus has an unlocked bootloader, it's hard bricked. Samsung can cover the bill.
Poor Samsung..
Sent from my francoPhone

ChongoDroid said:
The nexus has an unlocked bootloader, it's hard bricked. Samsung can cover the bill.
Poor Samsung..
Sent from my francoPhone
Click to expand...
Click to collapse
No, they can't and won't...
It's his OWN fault, for mucking round, with this delicate piece, of technology...
We ALL have to do this, on our OWN responsibility...
If he mucks up his phone, HE can pay for it...

h_10 said:
and this is why we can't have nice things....
this is one of the reasons why phone companies are so against unlocking bootloaders. people screw up their rooted, unlocked phones and then send it back to vzw or the manufacturer to cover the bill.
if you're going to root your phone and mod it, then man up and accept the consequences when you derp it.
not saying the op isn't going to accept full responsibility, but your advice is what's wrong w/ some in this rooted community.
Click to expand...
Click to collapse
Sorry your post is so retarded I have to double reply.
Do you really think the tiny amount of repairs coming from botched hacks is the reason most companies are locking bootloaders? Like really..
My advice is what's wrong? Hmm..
Maybe the OP should "man up" and go buy a new handset instead of Samsung hiring some monkey for $12 an hour to hook his phone up to a jig.
...Jack wagon
Sent from my francoPhone

[Q] Is my Galaxy S3 i747 seriously hard bricked?

(NOTE THAT I AM ONLY EXPLAINING IN *DETAIL SO THAT SOMEONE MAY BE ABLE TO CORRECTLY ANALYZE THE PROBLEM)
Okay, so I got my new AT&T Samsung Galaxy S III less than a month ago.
My friend helped me in the past few days to root and install cyanogenmod 10. Everything was still fine, until I did something in some kind of pixel density changing app. When rebooting, it only showed the Samsung and Samsung Galaxy S III screens when booting up, but went no further. I wiped everything and restored the last backup I made (advanced restore). Everything ran fine again, with all the original factory stuff. I decided to try and see if I could reinstall cm10 (wiped everything, installed zip, rebooted), and it was successful. Then I decided I wanted to wipe that and try out Energy HD 2.0. Once trying to install the zip, it returned an error message and aborted. I then decided to scrap that idea and just go back to the original factory rom and everything. So I once again wiped and restored my last backup. Upon hitting Reboot, it just went black and didn't turn on again. Now I am completely unable to turn it on, charge it, go into cwm recovery, or download mode. Plugging into the computer just pops a driver install message for QHSUSB_LOAD. Never has anything, even the LED, so much as blinked.
Can somebody please help me? I just would like to know if there is a way to get it working. I'd be very grateful, thanks!
*detail, meaning just what I was doing, as I do not remember exact error codes and such.

Try reflashing. What stock image are you using?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

kinghorsey said:
Try reflashing. What stock image are you using?
Click to expand...
Click to collapse
Is it even possible to re-flash a recovery image (from Odin3) when the device cannot enter download mode?
I think it may have been CWM Recovery v5.0.4.2 or something that I originally installed/flashed (can't check right now though, because I was kicked off my computer). Then it had upgraded to v6.something later on my phone.
((Sent from my stupid old iPhone 3Gs))

Look into jtag service
sent from outside ur window

twanskys204 said:
Look into jtag service
sent from outside ur window
Click to expand...
Click to collapse
Haha, okay. I just don't want to spend $60 at this very moment.
Sent from omygoshwhatthehellareyoudoingoutthere
stupid iPhone

Ascyndaeon said:
Haha, okay. I just don't want to spend $60 at this very moment.
Click to expand...
Click to collapse
Yeah I would say your bootloader is messed up and the only way to breath life back into your phone is jtag repairs. I had a problem identicle to yours and I searched the net for a week solid trying to figure out how to fix it without having to fork over the money.. but alas had to send it. Luckily the guy who provides the repairs is amazing at what he does. Phone will be back in your hands within a few days if you're from the states.

fallenkirmit said:
Yeah I would say your bootloader is messed up and the only way to breath life back into your phone is jtag repairs. I had a problem identicle to yours and I searched the net for a week solid trying to figure out how to fix it without having to fork over the money.. but alas had to send it. Luckily the guy who provides the repairs is amazing at what he does. Phone will be back in your hands within a few days if you're from the states.
Click to expand...
Click to collapse
Hmm, okay. I wonder then why only JTAG Repairs knows how to fix this stuff, and the information isn't widely available.
And so if I do send it to jtag, then I guess I'll be getting it back within a few days, 'cause I live in the US.
Thanks for your input.

Ascyndaeon said:
Hmm, okay. I wonder then why only JTAG Repairs knows how to fix this stuff, and the information isn't widely available.
And so if I do send it to jtag, then I guess I'll be getting it back within a few days, 'cause I live in the US.
Thanks for your input.
Click to expand...
Click to collapse
Well there is a way for you to do the jtag repairs yourself... but i wouldn't touch the process with a 10 foot pole lol... I would rather let a pro do things like that... just youtube jtag repair and take a look at some of the process.... way beyond my comprehension atleast..

fallenkirmit said:
Well there is a way for you to do the jtag repairs yourself... but i wouldn't touch the process with a 10 foot pole lol... I would rather let a pro do things like that... just youtube jtag repair and take a look at some of the process.... way beyond my comprehension atleast..
Click to expand...
Click to collapse
Ah, I suppose you're right. Not to mention expensive. That equipment probably costs more than having them fix it. Though it would probably be worth it of you bricked it on a regular basis.

Trying to reset before warranty claim

Hey guys,
Kind of an interesting question here. I've had my GS3 since summer and it's been running great. I was on a custom ROM with root (done without tripping binary), so it still says Samsung official and 0 flashes on the download screen, but it does say "custom" on the system status. Anyway, I hadn't done anything with flashing in several months. But the other day my phone just shut off and wouldn't turn back on. When I try, it vibrates, goes to the samsung splash screen, then shuts back down. Doesn't matter what I do, it won't get further than this. Can't boot into recovery or download mode with the button combos either. Won't read it on the computer or anything either. So I went out today and made a jig, thinking this would help. Well, it kind of did. It boots it into download for about five seconds, then shuts back off. So it's not enough time for me to get it to the computer and flash the stock ROM through Odin. I was thinking about trying to send it in to Samsung for warranty claim, because I had seen that people had luck with this when this was happening to a lot of GS3s in December. On several forums people said that Samsung was doing it no questions asked, regardless of root because they knew it was a hardware problem. So my question was just whether anyone here had any experience with it/Samsung? Or whether you guys thought I would be smarter to try and do it with AT&T? Anyway, thanks a lot for your time and input.

xThaNaturalx said:
Hey guys,
Kind of an interesting question here. I've had my GS3 since summer and it's been running great. I was on a custom ROM with root (done without tripping binary), so it still says Samsung official and 0 flashes on the download screen, but it does say "custom" on the system status. Anyway, I hadn't done anything with flashing in several months. But the other day my phone just shut off and wouldn't turn back on. When I try, it vibrates, goes to the samsung splash screen, then shuts back down. Doesn't matter what I do, it won't get further than this. Can't boot into recovery or download mode with the button combos either. Won't read it on the computer or anything either. So I went out today and made a jig, thinking this would help. Well, it kind of did. It boots it into download for about five seconds, then shuts back off. So it's not enough time for me to get it to the computer and flash the stock ROM through Odin. I was thinking about trying to send it in to Samsung for warranty claim, because I had seen that people had luck with this when this was happening to a lot of GS3s in December. On several forums people said that Samsung was doing it no questions asked, regardless of root because they knew it was a hardware problem. So my question was just whether anyone here had any experience with it/Samsung? Or whether you guys thought I would be smarter to try and do it with AT&T? Anyway, thanks a lot for your time and input.
Click to expand...
Click to collapse
Did you get a new battery? Worth a try. AT&T might get you one on the spot to try at a corporate store. Otherwise I doubt AT&T will be able to tell if you rooted if you can't boot up.

aybarrap1 said:
Did you get a new battery? Worth a try. AT&T might get you one on the spot to try at a corporate store. Otherwise I doubt AT&T will be able to tell if you rooted if you can't boot up.
Click to expand...
Click to collapse
Absolutely true, but if its not the battery the atat rep will point you to an atat service center for assistance and its a safe bet that they have a few more tools at their disposal to troubleshoot the phone. If they somehow see any system modification, you are capital F****d. Do you have the wireless insurance with atat? I just dealt with this except I dropped the phone, shattered the screen and it would only power on for 10 mins at a time and then reboot. I paid my $$$ deductable and sent the broken phone to the insurance provider and yes the system still showed as being "modified" when I sent it to them.
Sent from my Atat S3 that now thinks its a Galaxy Nexus........

I would send your s3 to Samsung if it still under warranty. I sent over my bricked s3 and they fixed it.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Probably just hard bricked - Any ideas?

I'm not new to these forums, I'm not new to phones ... especially Android. I haven't hard bricked a phone since my G1 back in the day. Any Ideas what happened here and any chance of hope in fixing it?
I just flashed this rom(At the very end of this rom thread you can see a few of my posts about this same issue) VIA clockwork touch recovery. Everything flashed fine ... no errors. Clean flash - Wiped cache, Dalvik, and factory erased everything.
What I'm getting is absolutely nothing. No lights, nothing on screen, no charging, no vibrating ... nothing. I do get the USB "hey you just plugged something in" sound. An older version of Odin shows "0:[COM10]" - but the newest version of Odin I can find shows nothing at all. ADB doesn't show anything (but I'm not horribly fluent in it either)
My macbook doesn't show anything but I don't know what else to look for on a mac besides something popping up. I have a Xubuntu partition on this desktop but I haven't tried that, after I make this post I'll do that.
I have seen a few threads/videos about Jtag'ing (I have no clue how to do that), Using a USB Jig? (I tried a DIY "Jig" - I'm fairly decent at diy electronics - It did nothing), and one thread <----- about fixing a bootloader-bricked S3 that I'm going to look a into a bit more.
Any ideas here guys? I'm not sure what even happened to be honest, Unless that's an Intl. ROM and I just didn't notice.

Yup that's an international rom. When I clicked your link, it took me to my browser where right at the top it said i9300, i9305. Sorry.

If you flashed that Rom on a d2 variant s3, then you bricked it. That was an international s3 Rom, which has completely different partitions and hardware.

Yeah I really don't know why that didn't even remotely cross my mind.
Any chance of bringing this S3 back?

BLMaros said:
Yeah I really don't know why that didn't even remotely cross my mind.
Any chance of bringing this S3 back?
Click to expand...
Click to collapse
A j-tag should fix it. Just search for some repair shops around your area. My roommate bricked his and had it fixed for $50.

Cameronmx9 said:
A j-tag should fix it. Just search for some repair shops around your area. My roommate bricked his and had it fixed for $50.
Click to expand...
Click to collapse
A JTAG would be able to fix it. The forums even discuss it. - I remember reading a Sprint variant S3 JTAG unbrinking guide/discussion.
Sent from my SAMSUNG-SGH-I497 using Tapatalk

I figure a Jtag is the only fix, anychance a "Jig" will work though?
codemonkey98 said:
A JTAG would be able to fix it. The forums even discuss it. - I remember reading a Sprint variant S3 JTAG unbrinking guide/discussion.
Sent from my SAMSUNG-SGH-I497 using Tapatalk
Click to expand...
Click to collapse

BLMaros said:
I figure a Jtag is the only fix, anychance a "Jig" will work though?
Click to expand...
Click to collapse
A jig would probably only work on a soft brick.

Correct, jig only works when there is a download mode to force. By flashing the international Rom, nothing is where it should be, partition wise. There's a thread by mskip in the development about how to recover a phone if this happens, but it may not work

mrhaley30705 said:
Correct, jig only works when there is a download mode to force. By flashing the international Rom, nothing is where it should be, partition wise. There's a thread by mskip in the development about how to recover a phone if this happens, but it may not work
Click to expand...
Click to collapse
From what I can tell his thread seems to work if you can see anything on-screen to actually boot into download mode. I get absolutely nothing on screen. I have a Sprint and a Verizon S3 as well - A DIY "Jig" forced them into download mode but is doing nothing for my ATT s3.

BLMaros said:
From what I can tell his thread seems to work if you can see anything on-screen to actually boot into download mode. I get absolutely nothing on screen. I have a Sprint and a Verizon S3 as well - A DIY "Jig" forced them into download mode but is doing nothing for my ATT s3.
Click to expand...
Click to collapse
I think your only option would be an actual JTAG.

Your most likely correct, but it never hurts to try