I switched over to Cyanogenmod, and am looking for a resizable photo frame widget similar to the stock touchwiz one. I am preferably looking for one that does not have any unneeded permissions (Although I can find ways around that if need be)
I would like this because I like to keep a picture of my cat and my best friend on one of my homescreens.
Purple Ferret said:
I switched over to Cyanogenmod, and am looking for a resizable photo frame widget similar to the stock touchwiz one. I am preferably looking for one that does not have any unneeded permissions (Although I can find ways around that if need be)
I would like this because I like to keep a picture of my cat and my best friend on one of my homescreens.
Click to expand...
Click to collapse
check out https://play.google.com/store/apps/details?id=net.greenturtles.photoframe&hl=en
I like it because it allows me to set a certain folder as the album source to have on slideshow.
I checked that one out. One of the permissions concerns me though, namely
READ PHONE STATUS AND IDENTITY
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Why would it need this? It seems unwarranted for a Picture Frame to know my phone number and device ID's. I suppose with some sort of Permissions-Denied Esque app I could change this or deny that permission though.
Yea not too sure about that permission, but Ive been using it for a while without any problems
Does it come in multiple sizes. I mean Nova Launcher can resize them and all, but I was just curious if it did. I also found a Gridlike one somewhat like the HTC which needs very few permissions, and thats only for some features on it I will never actually use.
Either way, Permissions Denied can solve this problem
Related
Hey all, a while ago I was browsing threads for my old Moto Milestone, and saw a screenshot where the person had large contact icons on his homescreen (about equiv to 1x1 widget per contact). I thought I had read they were using either FolderOptions or BetterCut, but when I try to setup either, the contact photos always come out tiny. Am I messing up the setup of either of these, or could someone who has done this either either program, give me a hand.. Or even could someone point me to a way to do this? I always found the HTC People/LauncherPro Plus one kinda lacking, and REALLY lacks customization.
All I'm really looking for is a Contact photo on my homescreen that when I click it would either popup the little contact slide bar(phone/txt/email/etc) or just take me straight into HTC People contacts. Ability to turn on/off contacts name text would be a bonus!
Any help/app suggestions?
Wow.. 46 views and no one has a suggestion or even a comment?
How about this.. anyone know if it's possible, or what I'd have to hack, to increase the thumbnail size from the original Shortcuts -> Contacts or Shortcuts -> People to increase the size and remove the frame? (either full 1x1 widget size, or even 2x2 would work beautifully)
I believe you can use an app called "desktop visualiser"
Haven't used it for that purpose myself but i don't see why it shouldn't work.
Hope it helps.
swiftfx said:
I believe you can use an app called "desktop visualiser"
Haven't used it for that purpose myself but i don't see why it shouldn't work.
Hope it helps.
Click to expand...
Click to collapse
OMFG That was EXACTLY what I was trying to find something to do! You are a life-saver.. I had given up finding something to do it, and just started learning to write an app to do it myself LOL Oh well, maybe I'll keep writing and see what I end up with.. but this is seriously the perfect tool for me.. It's gonna take over like 65% of my homescreen space now lol
As above, I'm looking for a contacts widget that will work with 2.3.3. Does anyone know of any? I've tried a half dozen or so from the market but they either don't work, or don't work the way I want them to.
I'm just looking for a non-scrolling sense type one. I don't want to install any launchers or anything like that, I'm happy with the phone as it is in that respect, so I would rather have a static one.
The closest one to the mark was Contact Widget, it looked the part but was very buggy. It was meant to show 20 contacts at any one time but after I had selected the 20, it then only displayed 4 and pretty much froze. Not sure if that's a 2.3.3 issue or not.
Any recommendations?
If you want one that's non-scrolling, I would suggest not installing anything. Just add shortcuts to your contacts on the home screen. You can also put them into a folder if you so choose.
ohyeahar said:
If you want one that's non-scrolling, I would suggest not installing anything. Just add shortcuts to your contacts on the home screen. You can also put them into a folder if you so choose.
Click to expand...
Click to collapse
Thanks for that, 2 years I've been running android and didn't know that lol.
I eventually found and sorted out elixir which does the job nicely.
Whenever I compose a new message in the stock Messaging app, when I enter in a name, I get not only their mobile number, but also their email, their house phone, their work, etc...but I only need to see their mobile. Is there any way to make this happen? I wouldn't like to remove the numbers permanently off my phone (some of them I cannot, they are from facebook).
As far as I can tell, there isn't a way to do this through the phone's options.
The only thing that comes close is this: when choosing names from the contacts list, you can specify a preferred number to use for messaging, but this only appears to apply to choosing names from your contacts. Typing in a name will still suggest all of that person's numbers.
Hmmm, ok. Is there a modification to the messaging app that I could use perhaps? Or, if I were to root my phone (maybe), is there some things I can mess with in the apk to disable this?
To be honest, I don't know. There might be, but I have little experience modifying the system apps.
I did a bit more searching on this issue and it appears there used to be such an option in Android 2.1 or 2.2, but it's missing in 2.3. According to the majority of forum posts I came across, the "solution" to this problem is to install a third-party messaging app like Handcent, which apparently does have an option to filter contacts so that only mobile numbers show up.
Also, I poked around in a decompiled version of Mms.apk (the messaging app) and there doesn't appear to be any easy way to change the current functionality. I think the solution lies in changing what suggestions the app returns when you start typing a name (so instead of returning all numbers/emails, it just returns numbers categorized as mobile), but I can't find what file contains that behavior. I'll keep looking, though.
Ok, thank you for looking. Keep in mind that this is a Samsung phone, and I think they install their own flavor of the MMS app. If you'd like, I can see if I can track down an APK (probably from a rooted Galaxy S II Skyrocket) and send it over to you.
And, If I need to use a different messaging app, is there a way to make it blend in as much as it can, like instead of seeing custom icons/names/ads, seeing something like the stock Messaging shortcut/app.
Right now the default program is Paper Artist, which I don't care for, specially since I don't know how to disable all of those fruity filter overlays. I'd rather open it with something different.
Ideas?
Update: just froze Paper Artist with TB, looks like it might be hard coded to use that app
sent from my ginormous Note II
Clear defaults for that app. You Must have set it as a default. When I do a screen shot I get like 6 options. I never set a default app to handle screenshots.
Sent from my Galaxy Note II using XDA Premium.
KB112 said:
Clear defaults for that app. You Must have set it as a default. When I do a screen shot I get like 6 options. I never set a default app to handle screenshots.
Sent from my Galaxy Note II using XDA Premium.
Click to expand...
Click to collapse
You are wrong. No defaults is set for note2 and it will directly open paper artist without any choice. The edit key is junk and you must open the picture and select edit. Then you can use your own editor.
spent over hours and still cannot find a solution to make the "edit" button on notification bar to work with other app. giving up and wait for a patch
Not the best solution, but this worked for me: http://www.tech-recipes.com/rx/29473/ok-android-jelly-bean-reset-app-preferences/
As the OP realized, the Note II is hard-wired to launch Paper Artist by default in that instance, even when no defaults are defined in that particular app. Put another way, it's in the stock ROM.
If flashing another ROM outright isn't desirable ( and is likely overkill ), there are still a couple of options. For the benefit of future readers who stumble upon this page :
• See if there's an Xposed Framework module that takes care of it, possibly as part of a package along with other mods. If unfamiliar with Xposed, take a look here : http://forum.xda-developers.com/xposed/framework-xposed-rom-modding-modifying-t1574401
• If the device is rooted and Paper Artist will likely not be used in any context, the app can be frozen—or outright uninstalled—using Titanium Backup. Titanium will issue a warning if uninstalling, because Paper Artist is a stock app… but it's also a standalone app and will not cause problems if uninstalled. That said, freezing is of course the safer option. Either way, the impact will be the same : the post-screenshot message in the notification panel from then on will change to "Screenshot captured – Touch to view your screenshot". Tap it and it will open in the stock Gallery, and from there the image can be taken anywhere by tapping the Share symbol at the top ("Share via…" pops up followed by a list of every app on the device that can open that file type ).
That last option may look more involved than it is, but it's only one extra step : instead of screenshot direct to editing app, it's screenshot to Gallery to editing app. Also note that whenever the editing in question involves only very basic functions ( cropping, markups, framing ), it can be done directly in the stock Gallery app, without necessarily taking it further.
All,
I've been spending a bunch of time trying to get my icons to match Yahoo (using yahoo for my data as well). Ultimately I want my widget to open yahoo weather with certain clicks and I just want everything to be cohesive in look.
So far, I was able to extract all the icons from the yahoo weather apk, and i generally have them working. However, I've noticed that Yahoo actually has many more than 16 weather types. This seems to be causing me all sorts of inconsistencies in terms of what is shown on my widget versus what is shown in the app, specifically in future forecasts for the days ahead. For example, the app shows the next 6 days as scattered thunderstorms (its florida after all). But, my widget is showing them all as full thunderstorms (different icon than the app). I can somewhat "fix" this by mapping them to scattered, but that would just break the ones who truly should be mapped to thunderstorms.
The other problem I'm having is that the future days (once its past sunset) are all changing to nightime icons instead of being locked to day versions (as it is in the app).
Anyone have experience in trying to get everything consistent? Whats the best way to address it? And, is it possible to map the full list of Yahoo data instead of just 16? Perhaps I just screwed something up in my config file when i tried it? The yahoo developer page has a list of all of them, though I have no way to tell if that's actually 100% up to date either? Looks like it was posted in 2011. How can I make the day/night versions ONLY apply to my current weather, and not future? Maybe build 2 different sets of the same icons and exclude night? Seems like a lot of work, so wondering if anyone has tackled something similar.
Thanks,
Also, i assume somewhere zooper is taking the 48 Yahoo weather conditions and mapping that down to just 16? Where / how is that done?
g8rfn said:
All,
I've been spending a bunch of time trying to get my icons to match Yahoo (using yahoo for my data as well). Ultimately I want my widget to open yahoo weather with certain clicks and I just want everything to be cohesive in look.
So far, I was able to extract all the icons from the yahoo weather apk, and i generally have them working. However, I've noticed that Yahoo actually has many more than 16 weather types. This seems to be causing me all sorts of inconsistencies in terms of what is shown on my widget versus what is shown in the app, specifically in future forecasts for the days ahead. For example, the app shows the next 6 days as scattered thunderstorms (its florida after all). But, my widget is showing them all as full thunderstorms (different icon than the app). I can somewhat "fix" this by mapping them to scattered, but that would just break the ones who truly should be mapped to thunderstorms.
The other problem I'm having is that the future days (once its past sunset) are all changing to nightime icons instead of being locked to day versions (as it is in the app).
Anyone have experience in trying to get everything consistent? Whats the best way to address it? And, is it possible to map the full list of Yahoo data instead of just 16? Perhaps I just screwed something up in my config file when i tried it? The yahoo developer page has a list of all of them, though I have no way to tell if that's actually 100% up to date either? Looks like it was posted in 2011. How can I make the day/night versions ONLY apply to my current weather, and not future? Maybe build 2 different sets of the same icons and exclude night? Seems like a lot of work, so wondering if anyone has tackled something similar.
Thanks,
Click to expand...
Click to collapse
You will not be able to match Yahoo's weather states exactly with Zooper. As you already figured out, Zooper only knows 16 weather states, which is done to unify the states from different weather data providers to a single interface. The external states are mapped internally to these internal ones and this process can not be influenced from the user side.
As to your second question about the day/night icons: download my weather icon set here and check the included XML. It's configured to only show day/night icons for the current weather option and not the forecast variants. You should be able to transfer this to your set quite easily
Thanks!
Interesting. I didn't know zooper converted the 48 yahoo weathers to 16. What are those 16? I'm trying to do something similar to the OP but with bitmaps.
TheStretchedElf said:
Interesting. I didn't know zooper converted the 48 yahoo weathers to 16. What are those 16? I'm trying to do something similar to the OP but with bitmaps.
Click to expand...
Click to collapse
To answer my own question, and assuming this link is up to date, the 16 weather conditions of zooper are here: http://www.zooper.org/wp/archives/1155
kwerdenker said:
As to your second question about the day/night icons: download my weather icon set here and check the included XML. It's configured to only show day/night icons for the current weather option and not the forecast variants. You should be able to transfer this to your set quite easily
Click to expand...
Click to collapse
I am facing the same problem regarding day/night icons. I downloaded your config.xml and tried to modify my existing xml based on the info in your xml, but it seems I'm doing something wrong because when I open Zooper on my phone the app is not recognizing the modified xml.
I am attaching the icon set (including the original xml) without any modification. I would appreciate if you let me know exactly what to modify in the xml.
Thanks
jakou said:
I am facing the same problem regarding day/night icons. I downloaded your config.xml and tried to modify my existing xml based on the info in your xml, but it seems I'm doing something wrong because when I open Zooper on my phone the app is not recognizing the modified xml.
I am attaching the icon set (including the original xml) without any modification. I would appreciate if you let me know exactly what to modify in the xml.
Thanks
Click to expand...
Click to collapse
I rather prefere if you upload your edited version so I can check it for errors and tell you what you did wrong. That way you know what to do when the next icon pack comes around
kwerdenker said:
I rather prefere if you upload your edited version so I can check it for errors and tell you what you did wrong. That way you know what to do when the next icon pack comes around
Click to expand...
Click to collapse
Here's the modified xml.