Has any one got the red underline spell check working on their note 4 at&t varient ?
I have been doing some research and I think I have nerrowed down the issue just need some one who has spell check currently working on their device.
If you have then please do reply, it would be best if you have 6.0.1 update but I think android veraion wont matter at all.
:good:
Managed to fix it via ADB
- turn on developer options
- turn on usb debugging
- on your PC downlolad and install minimal adb and fastboot ( http://forum.xda-developers.com/show....php?t=2317790 )
- connect your device via usb to your PC, wait 2 minutes until adb drivers have been installed
- run the installed adb link in your start menu, a cmd window opens op
- enter: adb shell
- enter: settings put secure spell_checker_enabled 1
- close cmd, disconnect phone, spell checking is enabled
Yesterday i got my zuk z2 plus 64gb. I installed adb driver on pc & enable usb debugging from zuk z2 plus. I connect my phone to pc, Grant the usb debugging permission, extract the adb setup, shift button & write click. Now the cmd is open. When i enter "adb devices", my device is not showing.
I always use something called 15 Second ADB Installer when setting up ADB and Fastboot on a new computer. It installs all the correct drivers as well, so maybe that would solve your issue. Also, be sure to check Device Manager in Windows and see whether there are any devices showing with yellow caution symbols besides them.
If you find your phone displaying like this; right-click and choose 'Update driver', then 'Browse my computer for driver software' and 'Let me pick from a list of available devices on my computer'. Find Google Inc. and choose the one which says 'Android ADB Interface'. You have to do this AFTER running the 15 Second ADB Installer otherwise it won't work.
Definitely driver related, remove and reinstall etc but don't give up haha sometimes its a PITA to install the correct drivers...
satya365 said:
Yesterday i got my zuk z2 plus 64gb. I installed adb driver on pc & enable usb debugging from zuk z2 plus. I connect my phone to pc, Grant the usb debugging permission, extract the adb setup, shift button & write click. Now the cmd is open. When i enter "adb devices", my device is not showing.
Click to expand...
Click to collapse
Download MIFLASH TOOL, it installs all the drivers needed for Z2
Hello everyone, I really need help bad!! I just got my honor 7x and was trying to unlock my bootloader. I have followed directions for how to do this. The problem is that although I can see phone and files on laptop. For some reason the phone doesn't show as connected. I have tried adb commands as well as multi tool. Every way I try it doesn't work. I have unlocked bootloaders on other phone before. No matter what driver I have downloaded I still have yellow caution. Sighn in device manager ager. I have searched and searched for solution with no resolve. If it matters it is the model that a
Ends with the number 24. Thanks in advance
Hmmm..
edshawn911 said:
Hello everyone, I really need help bad!! I just got my honor 7x and was trying to unlock my bootloader. I have followed directions for how to do this. The problem is that although I can see phone and files on laptop. For some reason the phone doesn't show as connected. I have tried adb commands as well as multi tool. Every way I try it doesn't work. I have unlocked bootloaders on other phone before. No matter what driver I have downloaded I still have yellow caution. Sighn in device manager ager. I have searched and searched for solution with no resolve. If it matters it is the model that a
Ends with the number 24. Thanks in advance
Click to expand...
Click to collapse
Hello..
Original Cable ?
What Version Of Windows ?
Drivers Installed ?
ADB Debugging Switched On ?
When You Type "ADB / FASTBOOT DEVICES" Seeing A Series Of Letters & Numbers ?
RaiderWill said:
Hello..
Original Cable ?
What Version Of Windows ?
Drivers Installed ?
ADB Debugging Switched On ?
When You Type "ADB / FASTBOOT DEVICES" Seeing A Series Of Letters & Numbers ?
Click to expand...
Click to collapse
original as well as tried other cable.
windows 8
installed whatever drivers i could find. nothing said 7x .
i have allow adb debugging in charge only mode checked. i
when i type fastboot command as well as adb devices it doesn't find anything.
edshawn911 said:
original as well as tried other cable.
windows 8
installed whatever drivers i could find. nothing said 7x .
i have allow adb debugging in charge only mode checked. i
when i type fastboot command as well as adb devices it doesn't find anything.
Click to expand...
Click to collapse
Ok... Since I have no intention to root until Huawei pushes the Oreo and Facial Recognition updates, I have kept USB Debugging "OFF" and set Select USB Configuration to: Media Transfer Protocol (MTP)
Then, I attempted to do what you are trying to do... and it worked perfectly..
So.. Do This:
Step 1 Click on your windows icon and in the search bar type "CMD"
Step 2 Set USB Configuration to MTP.
Step 3 Again I had Debugging off.. you can try it with it on if you like.. either way turn off your device.
Step 4 Hold down the Vol-Down button while plugging your device into your USB cable connected to your computer.
Step 5 This will turn on your device and put you in Fastboot Mode.
Step 6 Now go to your ADB Command Line and type "fastboot devices"
You'll see it.....
Troubleshoot guide for updating the adb and fastboot drivers manually in a PC running any version of windows
First, try updating your drivers through windows update automatically. If the drivers are installed and still fastboot commands are not working, then follow these steps:
Pre-requisites:
* PC running windows 7/8/10
* Internet connection (just 20MB)
* Working USB cable
Steps:
(1) Download the [OFFICIAL][TOOL][WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.3 from XDA
Link: https://forum.xda-developers.com/showthread.php?t=2588979
(2) Install it with "Y" confirmation for all 3 options and reboot the PC
(3) Disable the internet connection of your pc
(4) Reboot your phone to fastboot mode and plug it to your PC's USB 2.0 port (important)
(5) Open device manager on PC and scan for hardware changes from the option if your device is not listed already
(6) If it shows 'Asus android device' -> "ASUS Android Bootloader Interface', right click on it and uninstall device with the 'delete the driver software' option ticked.
(screenshot 1 & 2)
(7) Now scan for hardware changes (magnifying glass icon)
(8) It will show 'Android' with an ! symbol
(screenshot 3)
(9) Right click -> Update driver -> Browse my computer for driver software
(10) Choose "Let me pick from a list of available drivers on my computer"
(11) Choose "Android device" or "Asus android device" or similar option and confirm it with Yes or Next option
(screenshot 4)
(12) A warning will pop up, press 'Yes'
Done
(13) Go to adb folder -> shift+right-click and open cmd or powershell window -> type "fastboot devices" without the quotes and you will see your device listed.
Nice... Thanks for the guide... Many people needed it... Was about to make one myself...
Great. Many many thanks bro
kickyvivi said:
troubleshoot guide for updating the adb and fastboot drivers manually in a pc running any version of windows
first, try updating your drivers through windows update automatically. If the drivers are installed and still fastboot commands are not working, then follow these steps:
pre-requisites:
* pc running windows 7/8/10
* internet connection (just 20mb)
* working usb cable
steps:
(1) download the [official][tool][windows] adb, fastboot and drivers - 15 seconds adb installer v1.4.3 from xda
link: https://forum.xda-developers.com/showthread.php?t=2588979
(2) install it with "y" confirmation for all 3 options and reboot the pc
(3) disable the internet connection of your pc
(4) reboot your phone to fastboot mode and plug it to your pc's usb 2.0 port (important)
(5) open device manager on pc and scan for hardware changes from the option if your device is not listed already
(6) if it shows 'asus android device' -> "asus android bootloader interface', right click on it and uninstall device with the 'delete the driver software' option ticked.
(screenshot 1 & 2)
(7) now scan for hardware changes (magnifying glass icon)
(8) it will show 'android' with an ! Symbol
(screenshot 3)
(9) right click -> update driver -> browse my computer for driver software
(10) choose "let me pick from a list of available drivers on my computer"
(11) choose "android device" or "asus android device" or similar option and confirm it with yes or next option
(screenshot 4)
(12) a warning will pop up, press 'yes'
done
(13) go to adb folder -> shift+right-click and open cmd or powershell window -> type "fastboot devices" without the quotes and you will see your device listed.
Click to expand...
Click to collapse
bro i have done everything you said, also i followed some youtube videos for help, also when i type "fastboot devices" it shows my device attached but when i try to execute something, my phone says "press any button to shutdown".....i want to flash my phone please help me........because somehow my phone got bricked after flashing latest havoc os 3.0 through twrp .
I follow xda for everything
looking forward for a quick response : - )
Divyajeet90 said:
bro i have done everything you said, also i followed some youtube videos for help, also when i type "fastboot devices" it shows my device attached but when i try to execute something, my phone says "press any button to shutdown".....i want to flash my phone please help me........because somehow my phone got bricked after flashing latest havoc os 3.0 through twrp .
I follow xda for everything
looking forward for a quick response : - )
Click to expand...
Click to collapse
I am having same problem... Did you find any solution for it?
kickyvivi said:
Troubleshoot guide for updating the adb and fastboot drivers manually in a PC running any version of windows
First, try updating your drivers through windows update automatically. If the drivers are installed and still fastboot commands are not working, then follow these steps:
Pre-requisites:
* PC running windows 7/8/10
* Internet connection (just 20MB)
* Working USB cable
Steps:
(1) Download the [OFFICIAL][TOOL][WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.3 from XDA
Link: https://forum.xda-developers.com/showthread.php?t=2588979
(2) Install it with "Y" confirmation for all 3 options and reboot the PC
(3) Disable the internet connection of your pc
(4) Reboot your phone to fastboot mode and plug it to your PC's USB 2.0 port (important)
(5) Open device manager on PC and scan for hardware changes from the option if your device is not listed already
(6) If it shows 'Asus android device' -> "ASUS Android Bootloader Interface', right click on it and uninstall device with the 'delete the driver software' option ticked.
(screenshot 1 & 2)
(7) Now scan for hardware changes (magnifying glass icon)
(8) It will show 'Android' with an ! symbol
(screenshot 3)
(9) Right click -> Update driver -> Browse my computer for driver software
(10) Choose "Let me pick from a list of available drivers on my computer"
(11) Choose "Android device" or "Asus android device" or similar option and confirm it with Yes or Next option
(screenshot 4)
(12) A warning will pop up, press 'Yes'
Done
(13) Go to adb folder -> shift+right-click and open cmd or powershell window -> type "fastboot devices" without the quotes and you will see your device listed.
Click to expand...
Click to collapse
Hello, I followed your mentioned steps but in my drivers its showing "Samsung Android Device" is that okay for my asus zenfone max pro m1 device? Or there is one portable device option, is that it?
Hi guys, specially opened an account because of this issue. I am unable to run the fastboot devices command even after following all the aforementioned steps. Phone screen turns black and a message appears on the top left stating "press any key to shutdown", while the fastboot devices command gives a "??????? fastboot" response on my PC. PLEASE HELP!
kickyvivi said:
(12) A warning will pop up, press 'Yes'
Done
Click to expand...
Click to collapse
After I completed all the steps, my phone showed on screen "press any key to shutdown" and even in device manager it shows android ADB interface as hidden. Help please. Rebooting again to fastboot mode doesn't help because it shows the same screen "press any key to shutdown" on reconnecting with PC.
May Asus x01bd can't in to the mode fastboot..how to solved it?
Kajin660 said:
May Asus x01bd can't in to the mode fastboot..how to solved it?
Click to expand...
Click to collapse
Well i learned this from somewhere but actually you need to turn off the secure boot in your PC from the BIOS. That's what helped me do it
D0CT0RFATE said:
Hi guys, specially opened an account because of this issue. I am unable to run the fastboot devices command even after following all the aforementioned steps. Phone screen turns black and a message appears on the top left stating "press any key to shutdown", while the fastboot devices command gives a "??????? fastboot" response on my PC. PLEASE HELP!
Click to expand...
Click to collapse
this same with me,, n i donk know how it is??
my phone asus x01bd
Nightmonkeyps said:
Well i learned this from somewhere but actually you need to turn off the secure boot in your PC from the BIOS. That's what helped me do it
Click to expand...
Click to collapse
can u explaining me?? sorry i dont understand what u mean??
Kajin660 said:
can u explaining me?? sorry i dont understand what u mean??
Click to expand...
Click to collapse
Well you know how there's a BIOS in your PC which contains the basic commands required to run a computer. There is a setting called secure boot inside your BIOS. You need to turn it off and then install fastboot tools. To open the BIOS, repeatedly press F10 or F8 on your computer while it is opening. This is how it worked for me atleast
Divyajeet90 said:
bro i have done everything you said, also i followed some youtube videos for help, also when i type "fastboot devices" it shows my device attached but when i try to execute something, my phone says "press any button to shutdown".....i want to flash my phone please help me........because somehow my phone got bricked after flashing latest havoc os 3.0 through twrp .
I follow xda for everything
looking forward for a quick response : - )
Click to expand...
Click to collapse
this happen to me,, and i have solved this,,
step:
1. U must flash ur Phone via qfil,(*)
,than u will lost ur IMEI and SN will Change to 111111,, but dont worry thats can be back again
2. next step is u must recover ur IMEI and SN back (in tele group u wil found the step) after that U just flash stock firmware modified (via TWRP/ORFOX)n then ur phne willl back normally
Note : (*) in firmware for flash via qfil replace the recovery.img with twrp/orfox (rename To "recovery.img") this will bring u a twrp/orfox recovery after flash via qvil
i hope this can help..
Hello my friends can someone help me with my problem? I have a LG G pad 10.1 v700 with broken/missing touch screen and LCD and I want it to connect to my monitor with vysor and/or [email protected] The problem is that I need to accept dialog windows when appears on my tablet when connecting to vysor, but i cant for obvious reason. I have installed ADB universal drivers, LG drivers, Android Studio and am trying with adb commands like "adb devices" to make some connection with my tablet but it says that my devices is unauthorized and don't accept adb commands at all. I read over the INTERNET that i need to boot in TWRP mode and than I can use adb commands there without authorization. I have previously installed TWRP recovery and also debugging mode is enabled, but when i am supposedly in TWRP mode (I don't hear LG boot sound sometimes after Power + Vol down button combination) my tablet doesn't recognize at all from Windows 10 and "adb devices" command show "error: no device". Can you help me?
My tablet is with android Kit Kat, rooted, Debugging mode is enabled, TWRP is installed
In Windows Device Manager I see in Android Devices - LG ADB interface, also in Portable Devices - V700
sinan.ismailov said:
Hello my friends can someone help me with my problem? I have a LG G pad 10.1 v700 with broken/missing touch screen and LCD and I want it to connect to my monitor with vysor and/or [email protected] The problem is that I need to accept dialog windows when appears on my tablet when connecting to vysor, but i cant for obvious reason. I have installed ADB universal drivers, LG drivers, Android Studio and am trying with adb commands like "adb devices" to make some connection with my tablet but it says that my devices is unauthorized and don't accept adb commands at all. I read over the INTERNET that i need to boot in TWRP mode and than I can use adb commands there without authorization. I have previously installed TWRP recovery and also debugging mode is enabled, but when i am supposedly in TWRP mode (I don't hear LG boot sound sometimes after Power + Vol down button combination) my tablet doesn't recognize at all from Windows 10 and "adb devices" command show "error: no device". Can you help me?
My tablet is with android Kit Kat, rooted, Debugging mode is enabled, TWRP is installed
In Windows Device Manager I see in Android Devices - LG ADB interface, also in Portable Devices - V700
Click to expand...
Click to collapse
Although I have personally not done so specifically for this purpose, you could try connecting a USB mouse via USB-OTG adapter and use the mouse pointer so select the check box and hit the correct button without using touchscreen... do provide feedback if you have success...