Develop Bugs

[Q] desire radio pu fail

My desire hangs on htc logo and 4 | marks on corners.tried to flash with android 2.3 update.but it fails in radio part.
C:\>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.02.0001
(bootloader) version-baseband: 5.17.05.23
(bootloader) version-cpld: None
(bootloader) version-microp: 051d
(bootloader) version-main: 3.14.405.1
(bootloader) serialno: HT05PPL02709
(bootloader) imei: 353833045782486
(bootloader) product: bravo
(bootloader) platform: HBOOT-8x50
(bootloader) modelid: PB9920000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3840mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: a7cdbe26
(bootloader) hbootpreupdate: 11
all: Done!
finished. total time: 0.023s
Could not use sd update procedure as it wont go to bootloader mode ,just only in fastboot mode.
Any help regarding may be greatly appreciated.

Sorry, forgot to mention,device is S-ON

majeed said:
Sorry, forgot to mention,device is S-ON
Click to expand...
Click to collapse
I'll quote myself at this. You're the third this week.
abaaaabbbb63 said:
The Fail_PU is sign of a radio brick. A radio brick is difficult to overcome. Few phones get rescued from this state.
First, try the 2.3 RUU a couple of times:
http://www.htcdev.com/process/legal_download/152
If it doesn't work, try putting the phone in the freezer for 10 minutes with the battery taken out, and then imediatelly try the RUU.
If those don't work, then you will have to try to flash a lot of wwe RUUs from here: http://www.shipped-roms.com/?category=android&model=Bravo
Good luck!
Click to expand...
Click to collapse

abaaaabbbb63 said:
I'll quote myself at this. You're the third this week.
Click to expand...
Click to collapse
Already i have tried the freezer method and tried the 2.3 upgrade.
Still gives the same error.

Unroot Desire HD not working

Hey everybody,
I was trying to get my DHD with cfx on it back to stock so my mom can start using it. But i cannot seem to get it done.
Here is all the info about the DHD in question.
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0029
(bootloader) version-baseband: 26.14.52.27
(bootloader) version-cpld: None
(bootloader) version-microp: 0438
(bootloader) version-main: 3.13.0.0
(bootloader) serialno: SH13FRX01758
(bootloader) imei: Its a secret wooooo
(bootloader) product: ace
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PD9810000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4072mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: fcef1579
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) region-id: 0
The Ruu keeps saying that i need to get the right RUU version. But my phone is unbranded so any WWE should be fine right. I already relocked the bootloader through fastboot, so that is not the problem.
I hope that one of you is able to help me.

TheJurgenp1 said:
Hey everybody,
I was trying to get my DHD with cfx on it back to stock so my mom can start using it. But i cannot seem to get it done.
Here is all the info about the DHD in question.
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0029
(bootloader) version-baseband: 26.14.52.27
(bootloader) version-cpld: None
(bootloader) version-microp: 0438
(bootloader) version-main: 3.13.0.0
(bootloader) serialno: SH13FRX01758
(bootloader) imei: Its a secret wooooo
(bootloader) product: ace
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PD9810000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4072mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: fcef1579
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) region-id: 0
The Ruu keeps saying that i need to get the right RUU version. But my phone is unbranded so any WWE should be fine right. I already relocked the bootloader through fastboot, so that is not the problem.
I hope that one of you is able to help me.
Click to expand...
Click to collapse
download ARHD and unroot via the superuser app.

Steam. said:
download ARHD and unroot via the superuser app.
Click to expand...
Click to collapse
Well the problem with this is that im relocked, and i have no idea how tu un-relock it. I googled for it, but could not find a clear anwser anywhere.
Edit 1: I've tried to run the ruu with a goldcard i created, but i ended up with the same result. I find this very strange.

Anyone who can help me out with this pls

Re-unlock the same way you unlocked the first time, with fastboot. How did you make a goldcard and what RUU?

bananagranola said:
Re-unlock the same way you unlocked the first time, with fastboot. How did you make a goldcard and what RUU?
Click to expand...
Click to collapse
So using HTC-dev again, i created the goldgard using the goldgard img helper ( cant remember by who, but he deserves the credits). And then used different ruu's. But the one i ended up using was RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1 and then the radio and such.

[Q] HTC desire hd install ruu error 131

Hello guy!
Today i bought a broken DHD. It's stuck in a bootloop. It had Unlocked bootloader but i locked it back and it is S-On. I can get in to fastboot and recovery (It has CWM). It apears that some1 tried to flash CyanogenMod and failed. I want to flash a RUU to make it work an then root and so on...but i can't find the right one...every time i get error 131. This is what i get from fastboot:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0029
(bootloader) version-baseband: 26.14.04.28_
(bootloader) version-cpld: None
(bootloader) version-microp: 0438
(bootloader) version-main: 1.31.405.6
(bootloader) serialno:
(bootloader) imei:
(bootloader) product: ace
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PD9810000
(bootloader) cidnum: T-MOB101
(bootloader) battery-status: good
(bootloader) battery-voltage: 4030mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: fcef1579
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) region-id: 0
First i tried to install RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed and thet I saw that my CID is T-MOB101 so i tried to install RUU_Ace_TMO_UK_1.75.110.2_R_Radio_12.28e.60.140f_26.04.02.17_M2_SF_release_163304_signed but on both i get error 131.
Does anyone know how to solve this? I would appreciate if you could share your ideas with me.
PS: Sry for my bad English.

Did you try with goldcard?

Gussta said:
Did you try with goldcard?
Click to expand...
Click to collapse
Nope, but i figured it out... I just unlocked the BL again, flashed a new recovery with fastboot, then I installed the boot.img of the rom that i wanted via fastboot and then i rebooted in recovery and flashed the rom...and it worked. The phone booted and everything works fine.

Congratulations and thank you for explaining to others

HTC One M8 return to stock s-on

I had previously put custom crDroid 7.1.1 . I've been trying to return to stock with s-on. I've tried methods from different threads on here specifically: https://forum.xda-developers.com/htc-one-m8/general/guide-restore-european-htc-one-m8-to-t3072235
However, when I try retrieving the rom.zip file I get an invalid message. Any suggestions?
Here is my info:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.213311491.05G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B13000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

josh2124 said:
I had previously put custom crDroid 7.1.1 . I've been trying to return to stock with s-on. I've tried methods from different threads on here specifically: https://forum.xda-developers.com/htc-one-m8/general/guide-restore-european-htc-one-m8-to-t3072235
However, when I try retrieving the rom.zip file I get an invalid message. Any suggestions?
Here is my info:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.213311491.05G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B13000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
Try using this RUU instead.
Scroll down to the Manual System Update Instructions and read them. The RUU download is at the end of the instructions.

I've tried that. Unfortunatley it doesn't work.

josh2124 said:
I've tried that. Unfortunatley it doesn't work.
Click to expand...
Click to collapse
Doesn't work how? "Doesn't work" doesn't help me/us to figure out what your issue is and how to fix it. When you run the RUU and it doesn't work, what error message are you getting?

it says, " The ROM Update Utility cannot connect to your Android Phone. Check your usb cable......."
I have the drivers installed

josh2124 said:
it says, " The ROM Update Utility cannot connect to your Android Phone. Check your usb cable......."
I have the drivers installed
Click to expand...
Click to collapse
Maybe you should have read to the bottom of the instructions in the link I gave you, where it says with your issue you should boot to bootloader/fastboot and run the RUU from there.

xunholyx said:
Maybe you should have read to the bottom of the instructions in the link I gave you, where it says with your issue you should boot to bootloader/fastboot and run the RUU from there.
Click to expand...
Click to collapse
I did and nothing worked

josh2124 said:
I did and nothing worked
Click to expand...
Click to collapse
Okay. In that case you should use the methods in this thread.

Thank you. Will give it a try and update

xunholyx said:
Okay. In that case you should use the methods in this thread.
Click to expand...
Click to collapse
Thank You so much. It Worked!!

josh2124 said:
I did and nothing worked
Click to expand...
Click to collapse
I know you fix your issue by now
But i have a question,have you relocked your bootloader before running the RUU.exe ?
Sent from my HTC M8 using XDA Labs

No I didn't

josh2124 said:
No I didn't
Click to expand...
Click to collapse
that's why the RUU didn't work for you
next time you need to use the RUU you should relock the bootloader first ( for s-on devices )
using this command
fastboot oem lock
then flash the RUU in fastboot mode ( use the same android version or higher ( for s-on devices )

HTC One M8 bootloader relocked, S-ON, no ROM, how to unlock

It was propably dumb of me to relock bootloader. I wanted to flash stock ROM and there was a guide somewhere on this forum to relock bootloader during the process of flashing stock ROM. Is there any way to unlock bootloader and make it S-OFF?
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH51AWM02892
(bootloader) imei: 357336067053667
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: ORANG001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

Can you use the HTCdev method?

u-wot-m8 said:
Can you use the HTCdev method?
Click to expand...
Click to collapse
I've used it already and it's still locked
Now I tried flashing system, but it won't even detect the device (tried on linux and windows 10)

DarkKnightComes said:
I've used it already and it's still locked
Now I tried flashing system, but it won't even detect the device (tried on linux and windows 10)
Click to expand...
Click to collapse
U jammed your bootloader. Fastboot oem lock and flash the ruu. Start over.