My Z10 holster is too short to hold my M7, so now I need a new one. Anyone know of any that aren't hideous or fake leather?
http://cdn-store.crackberry.com/ima...cessories/additional_images/13631/large/2.jpg
That's a link to my Z10 holster for reference. Constant eBay and Amazon searches have found me nothing. I'd rather avoid the Defender series just because adding so much bulk on to this beautiful phone is a crime.
I bought a generic one from Best Buy for my SIII that my One fits in. It does not fit with a full cover case, but does fit with a slim fit case. Note: it is fairly large, but that is what it takes to get the phone in it.
Related
i'm ready to purchase a xoom and looking for a good case i know otterbox makes good stuff but i hear it makes the tablet extra bulky is there another good recommendation ?
This one looks pretty good.
Has anyone purchased this Incipio case?
There are a few others on the XDA forum here who said the Incipio case is really good. But as far as non-folio cases go, I really like the Body Glove Phantom. It's sleek, snug, and still gives great access to the ports while still giving the protection.
The otterbox rubber sleeve is fine on its own, its only when you put the shell part on that it becomes too bulky, imho of course, I have since stopped using my otterbox and now just use the motorola folio case.
Staples has the Moto folio case for $10 on clearance but didn't like it. I ended up getting the Moto gel case because I don't have to take it off to fit the desktop dock.
Sent from my BAMF'ed Thunderbolt
I tried the Otterbox case but it was too bulky for me. I tried a cheaper CaseLogics case I got from Ebay which worked great with modifications but didn't hold up to well after a few months. I also tried the gel back but was always anxious that I might damage my screen in transit. I finally got the original Moto folio case made for the Xoom and it is the best one I've tried for my needs. Easy access and minimal bulk with built in stand/prop capability. I haven't even taken the Xoom out of it since I put it on a month ago. It is super slim but if you need the extra protection go with the Otterbox.
Same here!
I actually bought mine off refurb at WOOT.
They're having it for 329.99
Anyone have a side case with a solid belt clip that they are using with a Diztronic (TPU-cases)?
I have been trying the pocket and shirt pocket but so far its driving me nuts. I think I need to go back to a belt holster but I like my current case so im looking into holsters like this:
http://www.shopandroid.com/ecolife-hydro-side-case/4A120A8418.htm
The issue I have with many of this style is the poor belt clip lacking something from the bottom to keep it from sliding off.
Verizon sells one. Back before the LTE version came out, I walked into a local store with my GSM version and had them pull out whatever accessories they had that could work.
It's the biggest generic one they sell, ~$20. It's got a clip, not belt loops. I have a Diztronic TPU case on mine, and it stretched the case quite a bit, but at least it fits. The salesperson had a RAZR with a case, and her's also just barely fit (they're almost the same height).
I personally am looking now at the plastic holsters where you can snap in the cased phone.
Seidio makes really good holsters that sometimes can accept other cases on them . The draw back is Seidio is very proud of their cases and holsters . Im sure there will be cheaper alternatives coming out shortly .
There's a nice thread on this forum that summarizes 4-5 different holsters. The Seidio one is about $25 or so, without the case even. There's a real cheap $7+ one from htcpedia, which I have incoming, but reviews have not been good =P.
the siedio surface holster fits a tpu case pretty well. i added some "shims" to tighten it up some using the loop part of velcro on the bottom retainer tabs of the holster and it fits perfectly.
it's actually my current combo that i'm using.
I'm trying to find a decent horizontal leather holster for my new S3.
I'm talking about something that looks like the attached file. (apparently I am too lame yet to use a url)
I really like this case but I need it sooner than 2-3 weeks that it would take to ship from Hong Kong. So, if someone has an idea where I can find this case stateside or something similar that will hold the phone with a thin protective case like the Rock case. It should also either have 2 belt loops or a snap that keeps the clip from sliding off my belt.
Thanks.
Check your local ATT corporate store. I ordered a couple leather cases off of ebay and amazon but something was always wrong with them. Either felt cheap or to small to fit my GS3 with a thing case on it. The one at ATT cost as much as the 5 I ordered online but at least I could place my phone in it to see if it fits before I bought it. The case itself has two belt loops and a plastic clip that is not removable. It literally feels like it was made for the GS3 with a small case on it.
Sent from my SGH-T999 using xda premium
I ended up ordering the one from ebay. I know the quality is likely to be bad, but I am extremely hard on these things. I have a hard time paying for a holster that is just going to be broken in 2 months anyway. Even the holsters I get from the stores are this way. In any case, I ordered the holster + black shell combo. I'll see about giving it a quick review when I get them in.
Thanks for the suggestions all.
I have a Galaxy S3 (i747) with the new Samsung branded 3000 mAh battery, but I need a case. The Otterboxes do not fit, and IDK if the Incipio will (I had incipio before my old GS3 was lost). Which cases will definitely fit this new size?
Seidio Active
By leaving the back cover off the phone this one will fit. It has a hard plastic outer shield for the back so it offers plenty of protection. Works for me until a made to order case comes out. I had the kickstand model first. I think it sucks. Would not hold the phone vertical, was ugly and it bulged too much. That be my opinion.
nothing else?
i have the same problem.. someone solved it?
are not there any case for the original 3000 battery ?
Diztronics makes cases specifically for this battery.
Sent from my SAMSUNG-SGH-I747
accrews2001 said:
Diztronics makes cases specifically for this battery.
Sent from my SAMSUNG-SGH-I747
Click to expand...
Click to collapse
Unfotunatly to italy is not possible to recive from their store
thanks for the info ill' call my london friend.
I have this battery + the Diztronic. The case fits perfectly and is very well done. It is available via Amazon or through the Diztronic site.
There is a long thread about this battery here but you have to go through the entire thread to find the cases that work. Mentioned as cases that fit: the Zoogue Social, the Eclipse, the Case-Mate Emerge Smooth, the Urban Armor Gear case (if you do not use the included battery door), and the "fake Spigen Neo Hybrids" from sunsky. Others have modded the Otterbox Commuter and the Invero Hard Plastic Bumper case (from amazon UK).
I have ordered some cheapo silicon cases that I hope are stretchy enough to work with the extended battery as I would like some more colorful options.
Anyone know which case this is?
http://www.youtube.com/watch?v=FhecmpGKQz4
Anyone know of a horizontal leather belt carrying case with magnetic close that can hold the phone but with a touch more room than the standard size? I've just got the protective cover plus and it's great, hardly know it's there, adds more grip, protection, and looks like it's part of the phone, however it obviously adds a couple mm round the edges and now it won't fit in my existing leather pouch...
I've seen the XXXL ones on the american amazon, but being in the UK I'm hoping there might be something in this country? Also I think with XXXL it says it can hold the otterbox commuter so I'm thinking it might be too big.
I've heard this one allows some extra bulk:
http://www.amazon.co.uk/Horizontal-...8&qid=1369055316&sr=8-3&keywords=note+2+pdair
But I cannot guarantee it will fit.
i just posted that one in his other thread, but i can guarantee it will fit(only barely though)