HTC Desire USB Bricked Without Root
Hey guys, got a really tricky one for you here...
Some people may have seen a thread I posted the other day about problems that had arisen with my HTC Desire, well I have managed to find out that these problems are being caused by a USB Brick.
As of now I have managed to restore SD Functions however my phone will still not connect to the computer, and the phone won't recieve a network signal from Orange.
I read through this tutorial here and also this one here. My problem is, all the requirements of the fix, my device does not meet. My phone is not rooted, it is running the latest software and has the latest HBoot.
I also found this that looked very promising, however when I tried to log into my Google account on my phone, everytime it said it couldn't make a connection, I left it for a few hours and the same thing, I can't help but think this is due to the USB brick?
I just really need some help, is there anything I can do to restore USB functionality? The phone is being sent to HTC tomorrow, however I can cancel at any point. Please, I know there are so many amazing people on XDA that can help me. Thankyou
*UPDATE* - After using the Fastboot code to enable the SD Card, my Sim Card is now working. I have been able to log into my G-Mail account and download the terminal emulator which is an apparent fix in one of the posts I linked above, however this doesn't work. Please can someone help me
hy did you try to reinstal the software ???? the original os or an upgrade??
en_mih said:
hy did you try to reinstal the software ???? the original os or an upgrade??
Click to expand...
Click to collapse
I have done a factory reset, re-installed the PB99IMG and also flashed an RRU. All the problems persist
Really need help with this guys! E-Mail - [email protected]
jaaystott said:
Really need help with this guys! E-Mail - [email protected]
Click to expand...
Click to collapse
Hi.
If I understand well, you have got an USB brick, and your current situation is the following :
No S-OFF hboot, no ROOTED ROM, but SDCard reenabled, thanks to "fastboot oem enableqxdm 0" command in fastboot mode.
I'll try to drive you through the whole process for getting your phone back, since I've already encoutered this situation, and successfully solved it.
First step => Get a 'mtd0.img' file :
Go to "Menu>Settings>About phone>Software information>Kernel version", and write down your ROM version (2.6.32.15, for example)
Then, in fastboot mode, with USB cable connected to your PC, issue the following command
Code:
fastboot getvar cid
You should see your phone's CID, something like 'HTC__022'.
You then go to this site, provide both information 'cid' and 'rom version', and you'll get a 'mtd0.img' file.
Let me know when you've gone through this first step
leinad said:
Hi.
If I understand well, you have got an USB brick, and your current situation is the following :
No S-OFF hboot, no ROOTED ROM, but SDCard reenabled, thanks to "fastboot oem enableqxdm 0" command in fastboot mode.
I'll try to drive you through the whole process for getting your phone back, since I've already encoutered this situation, and successfully solved it.
First step => Get a 'mtd0.img' file :
Go to "Menu>Settings>About phone>Software information>Kernel version", and write down your ROM version (2.6.32.15, for example)
Then, in fastboot mode, with USB cable connected to your PC, issue the following command
Code:
fastboot getvar cid
You should see your phone's CID, something like 'HTC__022'.
You then go to this site, provide both information 'cid' and 'rom version', and you'll get a 'mtd0.img' file.
Let me know when you've gone through this first step
Click to expand...
Click to collapse
Hi,
I am very much interested in knowing about the complete procedure. Assuming we have done this first step, how to proceed from here?
HQRaja said:
Hi,
I am very much interested in knowing about the complete procedure. Assuming we have done this first step, how to proceed from here?
Click to expand...
Click to collapse
Next step will aim at flashing this 'mtd0.img' file onto the 'misc' partition.
Since we are S-ON, and the ROM is not rooted, we'll have to get temp root access. To do so, follow the steps below.
1.- Download the two files rageagainstthecage.tgz and flash_image, extract rageagainstthecage-arm5.bin, and copy rageagainstthecage-arm5.bin, flash_image, and the file mtdo.img at the root of your SD using any SD card adapter.
2.-Install 'Terminal Emulator' (free app on the Android Market) on your phone
3.- Issue the following commands from Terminal Emulator
Code:
cat /sdcard/rageagainstthecage-arm5.bin > /data/data/jackpal.androidterm/rageagainstthecage-arm5.bin
cat /sdcard/flash_image > /data/data/jackpal.androidterm/flash_image
cat /sdcard/mtd0.img > /data/data/jackpal.androidterm/mtd0.img
cd /data/data/jackpal.androidterm/
chmod 755 rageagainstthecage-arm5.bin flash_image
This will copy all three files to the right directory on your phone, and give exec rights to the files.
4.- Then run the program rageagainstthecage-arm5.bin from the Terminal Emulator
Code:
/data/data/jackpal.androidterm/rageagainstthecage-arm5.bin
in order to get temp root access. Be aware that the phone will have some kind of erratic behavior, and will seem to crash.
5.- Quit Terminal Emulator, stop it (Menu>Settings>Applications>Manage applications>Terminal Emulator>Force stop), and relaunch it. You should see a pretty # character, indicating you've got temp root access.
6.- You then issue the following commands, in order to flash the misc partition of your phone with the correct mtd0.img file
Code:
cd /data/data/jackpal.androidterm/
./flash_image misc mtd0.img
7.- Reboot your phone, and enjoy !!!
PS : All credits come to Antubis, from the French forum FrAndroid, who posted a very clever tuto in french
leinad said:
Next step will aim at flashing this 'mtd0.img' file onto the 'misc' partition.
Since we are S-ON, and the ROM is not rooted, we'll have to get temp root access. To do so, follow the steps below.
1.- Download the two files rageagainstthecage.tgz and flash_image, extract rageagainstthecage-arm5.bin, and copy rageagainstthecage-arm5.bin, flash_image, and the file mtdo.img at the root of your SD using any SD card adapter.
2.-Install 'Terminal Emulator' (free app on the Android Market) on your phone
3.- Issue the following commands from Terminal Emulator
Code:
cat /sdcard/rageagainstthecage-arm5.bin > /data/data/jackpal.androidterm/rageagainstthecage-arm5.bin
cat /sdcard/flash_image > /data/data/jackpal.androidterm/flash_image
cat /sdcard/mtd0.img > /data/data/jackpal.androidterm/mtd0.img
cd /data/data/jackpal.androidterm/
chmod 755 rageagainstthecage-arm5.bin flash_image
This will copy all three files to the right directory on your phone, and give exec rights to the files.
4.- Then run the program rageagainstthecage-arm5.bin from the Terminal Emulator
Code:
/data/data/jackpal.androidterm/rageagainstthecage-arm5.bin
in order to get temp root access. Be aware that the phone will have some kind of erratic behavior, and will seem to crash.
5.- Quit Terminal Emulator, stop it (Menu>Settings>Applications>Manage applications>Terminal Emulator>Force stop), and relaunch it. You should see a pretty # character, indicating you've got temp root access.
6.- You then issue the following commands, in order to flash the misc partition of your phone with the correct mtd0.img file
Code:
cd /data/data/jackpal.androidterm/
./flash_image misc mtd0.img
7.- Reboot your phone, and enjoy !!!
PS : All credits come to Antubis, from the French forum FrAndroid, who posted a very clever tuto in french
Click to expand...
Click to collapse
I already tried this process, it didn't work, when I did the RageAgainstTheCage command, it said searching for ADB, then something about not being able to find it, then when I restart the terminal and do the final command, it says permission denied -_-
jaaystott said:
I already tried this process, it didn't work, when I did the RageAgainstTheCage command, it said searching for ADB, then something about not being able to find it, then when I restart the terminal and do the final command, it says permission denied -_-
Click to expand...
Click to collapse
In order for rageagainstthecage to find adb process, you should tick 'USB debugging' in "Menu>Settings>Applications>Development>"
leinad said:
In order for rageagainstthecage to find adb process, you should tick 'USB debugging' in "Menu>Settings>Applications>Development>"
Click to expand...
Click to collapse
I could have fixed this myself aswell :| **** i just sent off my HTC Desire 30 seconds ago, no joke, the UPS guy just came and got it
jaaystott said:
I could have fixed this myself aswell :| **** i just sent off my HTC Desire 30 seconds ago, no joke, the UPS guy just came and got it
Click to expand...
Click to collapse
:-( (10 characters)
leinad said:
:-( (10 characters)
Click to expand...
Click to collapse
I really appreciate the help you gave me mate, even if I asn't able to fix my device, thankyou for the time.
leinad said:
Next step will aim at flashing this 'mtd0.img' file onto the 'misc' partition.
Since we are S-ON, and the ROM is not rooted, we'll have to get temp root access. To do so, follow the steps below.
1.- Download the two files rageagainstthecage.tgz and flash_image, extract rageagainstthecage-arm5.bin, and copy rageagainstthecage-arm5.bin, flash_image, and the file mtdo.img at the root of your SD using any SD card adapter.
2.-Install 'Terminal Emulator' (free app on the Android Market) on your phone
3.- Issue the following commands from Terminal Emulator
Code:
cat /sdcard/rageagainstthecage-arm5.bin > /data/data/jackpal.androidterm/rageagainstthecage-arm5.bin
cat /sdcard/flash_image > /data/data/jackpal.androidterm/flash_image
cat /sdcard/mtd0.img > /data/data/jackpal.androidterm/mtd0.img
cd /data/data/jackpal.androidterm/
chmod 755 rageagainstthecage-arm5.bin flash_image
This will copy all three files to the right directory on your phone, and give exec rights to the files.
4.- Then run the program rageagainstthecage-arm5.bin from the Terminal Emulator
Code:
/data/data/jackpal.androidterm/rageagainstthecage-arm5.bin
in order to get temp root access. Be aware that the phone will have some kind of erratic behavior, and will seem to crash.
5.- Quit Terminal Emulator, stop it (Menu>Settings>Applications>Manage applications>Terminal Emulator>Force stop), and relaunch it. You should see a pretty # character, indicating you've got temp root access.
6.- You then issue the following commands, in order to flash the misc partition of your phone with the correct mtd0.img file
Code:
cd /data/data/jackpal.androidterm/
./flash_image misc mtd0.img
7.- Reboot your phone, and enjoy !!!
PS : All credits come to Antubis, from the French forum FrAndroid, who posted a very clever tuto in french
Click to expand...
Click to collapse
Thanks, will feature your method in a guide at my blog (while giving you and Antubis full credit for it of course). =)
trying to follow your guide to restore my phone to work again! having trouble though...
i have got to the point of installing terminal emulator but at the point of issuing second cat command it says no such file or directory..
moley10 said:
trying to follow your guide to restore my phone to work again! having trouble though...
i have got to the point of installing terminal emulator but at the point of issuing second cat command it says no such file or directory..
Click to expand...
Click to collapse
I found a way around this, as I was having the same problem. Try This ->
cat /sdcard/rageagainstthecage-arm5.bin > data/data/rageagainstthecage-arm5.bin
Do that for the two other commands that follow that, then follow the instructions as given, that should work.
HQRaja said:
Thanks, will feature your method in a guide at my blog (while giving you and Antubis full credit for it of course). =)
Click to expand...
Click to collapse
Link to your blog? =)
ok, so i did that, no longer got errors.. seemed to work but after reboot still the same, doesnt connect to my pc, and device manager it is still being shown as 'qualcomm cdma technologies msm' in other devices!
is the purpose of those commands to moved the files to certain directory? i can get temp root with visionary to perhaps just move the files in root explorer?
thanks for all the help. its much appreciated!
Hello,
I've got a similar problem but this solutions doesn't work for me, because I cannot create a CID.
Any ideas?
Thanks in advance
hi,
i managed to create files etc and still am stuck with the same problem... searched hi and low for days,
hopefully someone will be able to find us a solution..
You mean creating the mtd from that site? Thats because you need to type the Build Number not the kernel version.
I wanted to change my device model, so I copied build.prop from another mobile to my mobile. I am already rooted. But unfortunately I did not change the o.s. from gingerbread to froyo in build.prop ( I have android 2.2 FROYO) When I rebooted, there were many errors. It is now showing no sim card. Mobile network search gives error. Effectively, I can not use the mobile. Terminal emulator, X-plore etc. stopped working. Only Rom toolkit free version works and astro file manager works. Other programs are forcefully closed. Needles to say, I must replace new build.prop with new one.
Using adb I can only pull files but can not write as it is in read only mode.
adb root and adb remount works only if you are in recovery mode ? Y mobile does not have any custom recovery so when I boot in recovery mode it hangs.
Superuser has installed su in system\bin directory. But from adb shell I can use su also. It gives permission denied error. Hence I can not remount the system.
I have read similar threads and found that on some mobiles adb root or adb shell su works but on some not.
I am using Vista 32 bit with admin rights, still can not use root in adb.
Please tell me, how can I mount system read-write. I can not install root explore as google play and even internet is not working.
Please help.
maheshchavan said:
Using adb I can only pull files but can not write as it is in read only mode.
Click to expand...
Click to collapse
activate USB debugging then in console
Code:
adb shell
su
mount -o rw,remount /dev/block/mmcblk0p1 /system
adb push build.prop /system/build.prop
check where is your build.prop
ruscan.calin said:
activate USB debugging then in console
Code:
adb shell
su
mount -o rw,remount /dev/block/mmcblk0p1 /system
adb push build.prop /system/build.prop
check where is your build.prop
Click to expand...
Click to collapse
OMG ruscan.calin i COULD KISS YOU! I had tried to change my OG EVO 4G's buildprop file to another phone so that I could purchase & download an incompatible Google Play app. However after I restarted the phone wouldn't start! It would boot into my rooted HTC EVO 4G Android 2.3.3 and HTC Sense 2.1 but it would get stuck on the wallpaper with just the notification bar at the top and all buttons would be frozen. However I noticed when I plugged in my phone to my computer via usb the computer recognized it. I always keep my phone with USB debugging enabled so I thought I should be good right? I have spent the last 4 hours trying to install and setup adb with no real previous experience with it. I am familiar with dos from years ago and that helped me as it's basic procedure, commands, etc. Then I found out how to install the HTC drivers which I needed and then download the Android SDK with adb that's included which many guides show easily. I started the command prompt (cmd), typed my adb devices command and hurray it showed my phone! I connected and quickly navigated to the build.prop system folder! Luckily when I changed the file I made a bak backup and left it in the same folder. Now the main issue was figuring out how to change the naming of the files which I did via usual adb commands (mv build.prop.bak build.prop). But then to no avail I couldn't get it to write due to it being a system read only folder! Arg! Then I found your post on here, above, and typed it in simply leaving out the adb push portion and replacing that with the mv file command instead and first changing the name of the bad file and then replacing the bak file as the good copy! I exited back to the adb main and unplugged my phone. Moment of truth and man was everything flashing through my head at once! I booted up and YESSSSSSSSSSSSSS, it worked! I went back into root explorer and got rid of the offending leftovers and I've learned my lesson! I just don't want to think about what would have happened if I hadn't found this post. Thank you and if anyone else makes this hug mistake let me know and maybe I can help. Moral of the story don't mess with the build.prop or any system folder unless you know what you're doing! Thanks again!
Quick Guide to Fix Android "build.prop" Issues:
1. Find and download USB drivers for your phone by model or type (HTC EVO 4G's HTC Fastboot drivers): http://downloads.unrevoked.com/HTCDriver3.0.0.007.exe
2. Download and install Android SDK and choose adb: http://developer.android.com/sdk/index.html
Guide: http://htcevohacks.com/htc-evo-hacks/how-to-install-android-sdk-and-adb-drivers-for-htc-evo-4g/
3. Run a command prompt from the "c:/program files/android/android-sdk/platform-tools/" directory. I had to copy the command prompt to get it to open there but sometimes a right-click action will do it. The guide below will help just navigate down to "Using ADB" and skip the rest.
Guide: http://www.howtogeek.com/114667/how...y-default-move-almost-any-app-to-the-sd-card/
4. Once you open the command prompt and you're in the "c:/program files/android/android-sdk/platform-tools/" foler type "adb devices" and your device should appear. If it does move on to next step.
5. Then type adb shell and use the ls command to see directories. Then you'll need to navigate to the system folder by typing "cd system" and then type "ls" to look around in the directory (similar to "dir" in DOS). You should now see the bad build.prop file.
6. You'll need to rename the file or push a correct version. First you need to use the "adb shell" command again and then "su" and finally "mount -o rw,remount /dev/block/mmcblk0p1 /system" to make the directory writable (see ruscan.calin post above for additional info).
Note: I only had to rename my build.prop as I already had my old one in the same system folder. You may have to copy the bad build.prop to your computer, edit it and then push it back to the same system directory. These directions are only for renaming files in the same folder. For the info on how to copy the file to your computer and push it back to your phone go to step *10 below or use the guide below it.
7. I already had the bad build.prop in the system directory with my old one which I had named build.prop.bak. If you have this too simply rename by changing the name first of the bad file to anything by typing "mv build.prop build.prop.bad" or similar.
8. Next rename the build.prop.bak to build.prop by typing "mv build.prop.bak build.prop". Everything should go smoothly and move onto the next step.
9. Finally, If no error messages are found, simply type "adb reboot" or "adb shell reboot" (Depending which version of ADB you have). You should be done, your phone will reboot like normal (working, lol) and everything should be working again! YAY!
*10. To copy the build.prop to your phone type "adb pull /system/build.prop c:\" and the file should be placed in the main c:/ directory on your computer. Navigate to the root (c:/) directory and then right click and "open with" the "build.prop" file using a notepad or other file editor. Then use the text editor (Notepad, etc) to change back what you originally changed to mess everything up. There is tons of stuff on the net to let you know what to fill back in depending on your phone model/type. Or it's possible to get a previous version from an old Nandroid backup or similar. Save the changed text file and make sure its named the same "build.prop" and make sure it's still in the root directory (If you're having issues on this step or just want more insight check out the guides and threads below for more help).
Guide 1: http://androidforums.com/admire-all...p-computer-not-phone-using-root-explorer.html
Guide 2: http://www.modaco.com/topic/328943-quick-guide-to-modifying-buildprop-with-adb/
Guide 3: http://forums.androidcentral.com/sp...-replaced-build-prop-phone-wont-start-up.html
*11. We've already made the directory writable in step 6 so we simply need to push the file back to the phone. If any error message appear re-do step 6 to make writable again. Otherwise push the modified file back to the phone by typing "adb push c:\build.prop /system/". Back to step 9 above! Yay!
If anyone wants to help cleanup this quick guide or make any changes feel free. I just wanted something so that if anyone else has this issue they won't have to worry or search forever to find a solution. OMG it's 2:30AM, to bed... I ride! LOL
Enjoy,
5th :highfive:
THANK YOU!!! Totally saved me today.
One thing that I noticed. After pushing the correct build.prop, I had to fully power down, then turn back on my Razr for it to load up the fixed build.prop.
error message,Help please
Hello, when i am going to mount and change the permission i am getting constant error od device not found or sh:not found.
What to do?Help me please?
jigarpattani said:
Hello, when i am going to mount and change the permission i am getting constant error od device not found or sh:not found.
What to do?Help me please?
Click to expand...
Click to collapse
What step are you on? What phone do you have? More info please?
i am have problem whit my pantech flex i need to use the build.prop.bak but when i type the su it stay in blank do nothing any ideas pls help
ehy there hope someone can help me...i have an archos 97b platinum, messed up with build.prop. So i pulled out and restored but can't push in any way. I have a cwm installed, tablet rooted but i alwais got "permission denied" at push command. Other error is operation not permitted" if i try remount command from adb. i can do mount -o rw,remount /dev/block/mtdblock7 /system but after that push still give me permission denied.
any suggestion?
http://imgur.com/FDLp4fl
i open a 2nd cmd, give the mount -o rw,remount /dev/block/mtdblock7 /system , and system is now rw, but from the first cmd when i give "push build.prop /system (or /system/build.prop) it will always return me permission denied
help
dev.block
i want to view to dev/block using adb shell #
eg . what block is boot.img
what block is recovery.img
what block is system.img
what block is cache.ing
adb shell getprop mtd is not work . Pls Help Me & sent to mail [email protected]
Did anyone successfully install debian kit on the galaxy note 10.1 (2014) ?
I tried,
sh /storage/emulated/0/debian-kit-1-6.shar
unpacks properly, but then nothing happens. A wizard is supposed to start.
I tried both 1-6.shar from Doviak, and 1-5.shar from sven-ola
I did the following. Start with unrooted device. Accept KK OTA upgrade. Now
I have SM-P600 with Android 4.4.2. Root with CF. This fails.
Flash openrecovery-twrp-2.6.3.3-lt03wifiue.img.tar with Odin. Then boot into TWRP and
install UPDATE-SuperSU-v1.94.zip. Now some apps ask for root access and it seems to be
granted; installed sdfix, and at least one app (aplinequest) that could not write after
the KK upgrade can now write to extsdcard.
Installed Debian Kit app. All green checks, except red Xs for "Kernel modules supported"
and "Valid 'su' command found". But I know su is working. (I think there was a red X by Debian
Kit already unpacked)
Transfer debian-kit-1-6.shar to device. I follow instructions, Install connectbot. Give 'su'.
Run sh /storage/emulated/0/debian-kit-1-6.shar
Get error messages (I didnt record them), such as md5sum not found, and
a couple of other binaries not found. I give echo $PATH and then look for these binaries
in my path. They are not there. So I install BusyBox Free. Run the shar file again. I
get a list of files extracted, but then nothing happens. Now I see that debian kit wants
to use its own busybox and I didnt need to install busybox, but debian kit did not work
in any case.
I try to run /data/local/deb/autorun with sh autorun. Exits with "Unsupported CPU or architecture"
Investigate and find shell var CPU is set correctly to "armel" on first past, but when the script
runs again with exec, CPU is ''. So I hardcode CPU=armel. Then I can get a little further.
And so on and so on, hardcoding CPU in all the scripts. Trying to get the scripts to see the
correct binaries, etc. Now I have a diskimage installed, can't go forward and can't uninstall.
If anyone can shed some light....
update
Deleted everything and started over. Using adb shell. I notice
that the installer says
Included busybox failed.
and tries to use system tar, sed, etc, which it cannot find.
However, If I put #!/system/bin/sh at the top of debian-kit-1-5.shar
And run ./debian-kit-1-5.shar rather than sh ./debian-kit-1-5.shar,
then the script runs for quite a while and extracts a lot of files.
It fails eventually with
ash: id: Permission denied
In fact, from the adb shell I get
126|[email protected]:/data/local # id
uid=0(root) gid=0(root) context=u:r:init:s0
[email protected]:/data/local # ./deb/armel/busybox ash -c "id"
ash: id: Permission denied
126|[email protected]:/data/local # ./deb/armel/busybox ash -c "/system/bin/id"
ash: /system/bin/id: Permission denied
More Update
It seems that in some cases the user 'shell' has permission to do something, but 'root' does not.
One thing stopping the debian kit install process is that root running a shell located under /data cannot run any executables via
passing a string on the command line. They can run commands interactively (maybe because the command
line uses exec ?). But the user 'shell' can run executables this way. E.g. I copied /system/bin/mksh to the /data partition.
[email protected]:/ $ su
[email protected]:/ # /data/local/bin/mksh -c "id"
/data/local/bin/mksh: id: Permission denied
1|[email protected]:/ # /system/bin/mksh -c "id"
uid=0(root) gid=0(root) context=u:r:init_shell:s0
[email protected]:/ # su shell
[email protected]:/ $ /data/local/bin/mksh -c "id"
uid=2000(shell) gid=2000(shell) context=u:r:init:s0
There are a few posts scattered around other forums mentioning the same problem when trying to
install debian kit, but no responses even recognized that there was a problem.
The solution was to install an selinux permissive kernel. Then installation
went normally.
I think I can help.
injola said:
Did anyone successfully install debian kit on the galaxy note 10.1 (2014) ?
I tried,
sh /storage/emulated/0/debian-kit-1-6.shar
unpacks properly, but then nothing happens. A wizard is supposed to start.
I tried both 1-6.shar from Doviak, and 1-5.shar from sven-ola
I did the following. Start with unrooted device. Accept KK OTA upgrade. Now
I have SM-P600 with Android 4.4.2. Root with CF. This fails.
Flash openrecovery-twrp-2.6.3.3-lt03wifiue.img.tar with Odin. Then boot into TWRP and
install UPDATE-SuperSU-v1.94.zip. Now some apps ask for root access and it seems to be
granted; installed sdfix, and at least one app (aplinequest) that could not write after
the KK upgrade can now write to extsdcard.
Installed Debian Kit app. All green checks, except red Xs for "Kernel modules supported"
and "Valid 'su' command found". But I know su is working. (I think there was a red X by Debian
Kit already unpacked)
Transfer debian-kit-1-6.shar to device. I follow instructions, Install connectbot. Give 'su'.
Run sh /storage/emulated/0/debian-kit-1-6.shar
Get error messages (I didnt record them), such as md5sum not found, and
a couple of other binaries not found. I give echo $PATH and then look for these binaries
in my path. They are not there. So I install BusyBox Free. Run the shar file again. I
get a list of files extracted, but then nothing happens. Now I see that debian kit wants
to use its own busybox and I didnt need to install busybox, but debian kit did not work
in any case.
I try to run /data/local/deb/autorun with sh autorun. Exits with "Unsupported CPU or architecture"
Investigate and find shell var CPU is set correctly to "armel" on first past, but when the script
runs again with exec, CPU is ''. So I hardcode CPU=armel. Then I can get a little further.
And so on and so on, hardcoding CPU in all the scripts. Trying to get the scripts to see the
correct binaries, etc. Now I have a diskimage installed, can't go forward and can't uninstall.
If anyone can shed some light....
Click to expand...
Click to collapse
I have the same tablet and I tried to answer you several times but when I give exact instructions they don't let my reply get to the thread for some reason. So I'll have to be less specific, sorry. Anyway. I rooted with an omnirom based setup. 412. Homemade. Once you get the debian-kit-1-6-testing.jpeg and you've unloaded it to you your root directory try:
#sh /data/local/deb/mk-debian -i
Follow the usage correctly and until your done testing leave:
-h
At the end of the script. But be sure to set it to armel and 2047 and wheezy and set the mirror to:
deb. .org/dists/wheezy/ main contrib non-free
Kali
catch all the protools and for the gpg licence use google search my username KeizerPaPa and I'll give you the gpg on my + account. Goodluck. ]
---------- Post added at 06:40 PM ---------- Previous post was at 06:28 PM ----------
KeizerPaPa said:
I have the same tablet and I tried to answer you several times but when I give exact instructions they don't let my reply get to the thread for some reason. So I'll have to be less specific, sorry. Anyway. I rooted with an omnirom based setup. 412. Homemade. Once you get the debian-kit-1-6-testing.jpeg and you've unloaded it to you your root directory try:
#sh /data/local/deb/mk-debian -i
Follow the usage correctly and until your done testing leave:
-h
At the end of the script. But be sure to set it to armel and 2047 and wheezy and set the mirror to:
deb http .org/dists/wheezy/ main contrib non-free
Kali
catch all the protools and for the gpg licence use google search my username KeizerPaPa and I'll give you the gpg on my + account. Goodluck. ]
Click to expand...
Click to collapse
Make sure you piece the above together correctly, they wouldnt let me type it all together. Thats deb http: //http
Then .kali then .org/dists....... have fun. If ya get stuck on the gpg search me and ask. KeizerPaPa
A reason why mine failed at first was because "Debian kit" is set to resolve ip addresses using "only" your Primary DNS Server (DNS 1). When I finally pinged my Primary DNS server, I found it was not functional. My Secondary DNS server (DNS 2) was functional (this also explains why my internet was slower than it should have been while browsing the internet)
I changed my Primary DNS server by
1) going into the WIFI settings
2) long-pressing on the WIFI I was connected to
3) choosing "Mofify..."
4) checking the "Show advanced..." option
5) changing from "DHCP" to "Static"
6) entering a functional DNS server (such as 8.8.4.4) for "DNS 1"
- Hyp