Related
*MATR1X WITH BLN AND VOODOO V11.5*
Changelog:
v1.0 Initial release, bln and voodoo for i9020.
v1.5 Added bln and voodoo support for i9023 as well.
v2.0 Fixed bluetooth for both models. Added Cyanogenmod 7 support.
v2.5 Added bfs for both models and updated kernel to 2.6.35.12. Also added cool matrix style boot animation. Also added Nexus s 4g support.
v3.0 Made all builds 1.2 Ghz.
v3.5 Added the smartass governor and overclocked to 1.4 Ghz.
v4.0 Updated voodoo driver 9 to driver 10, added interactive governor, added Proton Voltage Control support, and updated kernel base to 2.6.35.13.
v4.5 Added bfq i/o scheduler, overclocked to 1.5 Ghz, and fixed oxygen/cm7 voltage settings errors. (Remember, 1.5 Ghz is not very stable even though I have adjusted the voltages accordingly. You can always change the voltages in setcpu or proton.)
v5.0 Added -ck bfs performance tweaks (thanks morfic for telling me about that ), added cifs and nfs, removed the 1.4 and 1.5 ghz speeds to make it 1.44 Ghz, and added cool matr1x boot animation by rascarlo separately.
v5.5 Added Android v2.3.5 tweaks and changed voltages for better usability.
v6.0 Added Ezekeel's touchkey dimmer, TUN, and added 940Mhz with adjusted voltages.
v6.5 Added all of Ezekeel's mods, 600Mhz with adjusted voltages and new speeds, and updated kernel base to 2.6.35.14.
v7.0 Updated all of Ezekeel's current mods, added BLX, got rid of 600 Mhz and brought back 940 Mhz with adjusted voltages, and added SLQB.
v7.5 Added Snappy and Smartass v2 governors, TRIED to make things more stable with updated speeds and voltages , and added in some extra files for 2.3.7.
v8.0 Added Lazy governor by Ezekeel, fixed profile issues, fixed cm7 cpu fc's, and added some commits from standard cm7 kernel.
v8.5 Added liveOC mod by Ezekeel, replaced 1.44Ghz with 1.46Ghz, and added Minmax governor.
v9.0 Added Deep Idle, put in a conservative governor tweak (Thanks morfic), added in a 100% charge commit from the standard cm7 kernel (thanks KalimochoAz), added SFB, and added the VR I/O scheduler.
v9.5 Added the Bluetooth bug fix for deep idle, a Wifi tweak from Franciscofranco, and a 65 fps display rate.
v10.0 Updated all of Ezekeel's mods and added a whole bunch of performance tweaks from Franciscofranco.
v10.5 Updated all of Ezekeel's mods and added his voltage control mod.
v11.0 Updated all of Ezekeel's mods and fixed some voltages for stability.
v11.5 Updated all of Ezekeel's mods and added some performance tweaks from Franciscofranco.
System.out.println("Please flash at your own risk! I am not responsible for bricked devices! ");
**BOTH THESE ZIPS BOOT UP AT 1 Ghz. If you use setcpu to oc, DO NOT USE PROFILES. It will have a negative effect on battery life!**
**Both these zips use the ext4 filesystem**
**INSTRUCTIONS FOR INSTALLING**
***CFS Build***
Matr1x-cfs_v11.5.zip (This will work on any rom, thanks to Koush's AnyKernel)
***BFS Build***
Matr1x-bfs_v11.5.zip (This will work on any rom, thanks to Koush's AnyKernel)
Use recovery to flash from sdcard! You can also flash from Rom Manager. Then reboot.
Link to source: https://github.com/mathkid95/linux_samsung
v11.5 zips:
cfs (any rom)
bfs (any rom)
v11.0 zips:
cfs (any rom)
bfs (any rom)
v10.5 zips:
cfs (any rom)
bfs (any rom)
v10.0 zips:
cfs (any rom)
bfs (any rom)
v9.5 zips:
cfs (any rom)
bfs (any rom)
v9.0 zips:
cfs (any rom)
bfs (any rom)
v8.5 zips:
cfs (any rom)
bfs (any rom)
v8.0 zips:
cfs (any rom)
bfs (any rom)
v7.5 zips:
cfs (any rom)
bfs (any rom)
v7.0 zips:
cfs (any rom)
bfs (any rom)
v6.5 zips:
cfs (any rom)
bfs (any rom)
v6.0 zips:
cfs (any rom)
bfs (any rom)
v5.5 zips:
cfs (any rom)
bfs (any rom)
v5.0 zips:
cfs (any rom)
bfs (any rom)
v4.5 zips:
cfs (any rom)
bfs (any rom)
v4.0 zips:
cfs (any rom)
bfs (any rom)
**INSTRUCTIONS FOR INSTALLING BOOT ANIMATION**
If would like to know the all-out terminal way, pm me
For the easy way, download the zip to your phone. Go into root explorer and delete the current bootanimation.zip in the system/media folder. Put this new one in there.
**INSTRUCTIONS FOR USING EZEKEEL'S MODS** (Thanks Maximilian Mary!)
Also note that you need a rom with init.d support to flash this zip. If you do not have init.d support in the rom, you will need to set the delay each after each reboot.
Thanks to:
Ezekeel for all his mods!
rascarlo for the awesome boot animation!
netarchy for helping me with the code aspects!
Jonathon Grigg for the Proton Voltage Control app!
koush for the awesome AnyKernel zip!
ogdobber and morfic for clearing up any doubts I had!
akent for the i9023 bln!
supercurio for the great voodoo app and drivers!
Con Kolivas for the bfs!
Paolo Valente for the bfq!
Can I get someone feedback on the functionality for the 4g plz?
Just dl'ed and ill give ya my input in a few
Sent from my Nexus S 4G using XDA App
Ty
Sent from my Nexus S using XDA App
mathkid95 said:
Can I get someone feedback on the functionality for the 4g plz?
Click to expand...
Click to collapse
Please put a date in your main title so we can better track it. Thanks.
Lol I don't remember or use dates, I use my changelog.
dates suck anyway.. just the version and adds and fixes are important.
Matr1x-BFS.zip with OpenSoju 0.2.6, runs really smooth. /cache has dalvik-cache folder but has nothing (like cm). Also pc doesn't recognize device as modem. Running OpenSoju's stock kernel, the modem will show. No big deal tho. Thanks so much for making your kernel Sprint 4g compatible. Keep it up
Thanks,
That's really weird. The computer should definitely recognize the phone... Did u do a wipe dalvik cache?
thx!
Dalvik and cache
Uncle Jimmy says hello
Hmm...dunno.. it should work. Maybe try reflashing?
Its ok. It recognizes it for usb storage and debugging but doing *#*#8778#*#* and the selecting modem under "usb", the pc doesnt scan for hardware changes and it stays at android phone instead of switching to modem
Netarchy 1.3.5 doesnt switch to modem either. The 2.3.4 stock kernel and the stock kernel of OpenSoju both switch to modem. It is wierd
Uncle Jimmy says hello
mathkid95 said:
Lol I don't remember or use dates, I use my changelog.
Click to expand...
Click to collapse
Hmmm... well if its that much trouble.
Sent from my Nexus S 4G using XDA App
hehe it's not, i just dont wanna
How is the kernel?
Sent from my Nexus S using XDA App
Been looking for a stock kernel with bln/voodoo support. Will let you know how it works for me. Thank you for this.
Edit: Initial reactions, fast. No 4G here, so I can't tell you whether or not that aspect of it works, but it very nice so far.
ty! haha
Hey merc how is it?
Sent from my Nexus S using XDA App
OK I installed 1Hr ago. I'm confirming that 4G works and overall performance is very snappy , need to check battery life and stability. Thanks and GREAT WORK!
Going to try this out and see how it goes.
Hi:
I open this thread in order to provide in one post all our SGSII current kernel, where you can download each of them. To discuss and talk about them used the wires and opened thread please. I will update as it exits new versions.
THANKS FOR ALL COOKS
Although he put in each kernel, how to load a kernel based on their extension usually is:
- TAR: It flashes by Odin or with the option Flash Kernel from CWM app.
- ZIP: It flashes from the Recovery menu.
If you see a broken link, want to add or delete some kernel or whatever, send me a PM or leave a message here. Thank you.
It is very difficult to recommend a specific kernel it does not behave the same way in each SGSII. It is best to try and stay with the one you like and suits your needs.
Kernel's Collection
Speedmod (hardcore)
Links:
XDA Thread
Htcmania Thread (spanish)
Download:
Speedmod k1-t41
Speedmod k1-t40
Speedmod k1-t39
Speedmod k1-t32
Speedmod k1-t31
Speedmod k1-t30
Speedmod k1-t29
Speedmod k1-t28
Speedmod k1-t27
Speedmod k1-t26
Speedmod k1-t25
Speedmod k1-t22
Changelog:
K1-T41:
- Updated init.rc for better XXKI3 compatibility
Summary:
- Version: k1-t41
- Date: 10/03/11
- SetCPU: Yes
- OC: No
- UV: No
- BLN: No
- Bootanimation: No
Author's notes:
This kernel aims to be stable, fast and have good battery life. Current features:
Root and CWM:
- Automatically installs root (su)
- CWM 4.0.1.4 recovery
Screen and misc tweaks:
- MDNIE screen sharpness tuning (improves text readability)
- MDNIE color tuning (reduces over-saturation of color)
- Touchscreen sensitivity fix from vitalij (set to 10)
- init.d, TUN, CIFS, IPV6 Privacy support
Performance:
- CPU governor tweaks: increase responsiveness
- IO tweaks
- Read ahead tweaks
- Updated to jhash3
- Compiled with optimizations using Linaro 2011.07 GCC 4.5 toolchain
- Switched to SLAB instead of SLUB
- Enabled CONFIG_RCU_FAST_NO_HZ
Turned off unnecessary logging for better smoothness and efficiency:
- Disabled Android Debug Logger / logcat
- Disabled Kernel debug
- Disabled Samsung debug
- Disabled CONFIG_FTRACE
More features will be added along the way.
Click to expand...
Click to collapse
Ninphetamine (Hacre)
Links:
XDA Thread
Htcmania Thread (spanish)
Download:
Ninphetamine 2.1.3
Ninphetamine 2.1.2
Ninphetamine 2.1.1
Ninphetamine 2.1.0
Ninphetamine 2.0.5
Ninphetamine 2.0.4
Ninphetamine 2.0.2
Ninphetamine 2.0.1
Changelog:
2.1.3 Release Edition
- Re-enabled kallsyms (thanks supercurio for the heads up).
- Fixed initramfs to provide support to custom ROMs that use startup scripts in /system/etc/init.d (thanks designgears).
Summary:
- Version: 2.1.3
- Date: 08/28/11
- SetCPU: Yes
- OC: 1.600
- UV: Yes
- BLN: Yes
- Bootanimation: Yes
Author's notes:
Update to Samsung XXKG5 source (Update2)
Added GPU clock control interface (currently has no GUI)
Minimum CPU voltage now properly clamped at 800mV
Misc tweaks and fixes, see github commit log to cfs-exp for full details
Improvements to BLN battery usage.
Changes made to touchpanel sensitivity when the phone is charging to resolve issues for people using certain screen protectors that stop registering user input when on charge.
BLN support added.
RAM console (/proc/last_kmsg) added.
Workaround edition deprecated.
More VPN features added.
JHash updated to version 3.
CIFS support added.
Samsung's latest source update applied to base.
Kernel base updated to 2.6.35.11.
Overclock up to 1.6GHz.
Voltage control via SetCPU or Voltage Control from 800mV up to 1500mV.
BFQv2-r1 IO scheduler added and set as default.
Optimised EXT4 mount options.
Various other performance related tweaks.
Workaround Edition
As above, but with some patches applied to workaround errata inherent to some Cortex A8/A9 processors.
Click to expand...
Click to collapse
Hellcat's Root Kernel (HellcatDroid)
Links:
XDA Thread
Htcmania Thread (spanish)
Download:
v1.22 XXKH3 (2.3.4)
v1.22 XXKH1 (2.3.4)
v1.22 UHKG7 (2.3.4)
v1.22 XXKG6 (2.3.4)
v1.22 XXKG5 (2.3.4)
v1.22 XXKG3 (2.3.4)
v1.22 XXKG2 (2.3.4)
v1.22 XXKG1 (2.3.4)
v1.22 XWKF3 (2.3.3)
v1.22 XWKF1 (2.3.3)
v1.22 XWKE7 (2.3.3)
Changelog:
Updated to XXKH3
Summary:
- Version: 1.22
- Date: 8/27/11
- SetCPU: ?
- OC: ?
- UV: ?
- BLN: Yes
- Bootanimation: Yes
Author's notes:
+ Root
Kernel comes "instant rooted", after flashing this kernel your system is completely rooted (su, busybox and the Superuser app).
Nothing more needs to be done, totally newb friendly
+ ClockworkMod Recovery 4.0.1.4
This kernel also comes with the ClockworkMod recovery instead of the original stock one.
+ ADB with root priv's in recovery mode
When booted into recovery mode you have ADB available to connect to from your PC.
ADB also runns with full root priv's in recovery mode for all your haxx'n'tinker needs (in normally booted OS mode ADB still runns "secure" with only user priv's, use su to get root there)
+ Custom boot scripts
There is some bootscripts you can put your own commands in for being executed during boot.
The scripts are /system/bootrc.sh and /data/bootrc.sh.
+ Additional modules natively supported and loaded on boot
The original plan was to integrate these into the kernel, but due to hitting size limits of the zImage I decided to have them loaded from external directories.
Currently supported modules: (these modules are compiled together with the kernel and are included in the download!)
- slow-work.ko (not needed on Android 2.3.4 FWs, like XXKG2, e.t.c.)
- cifs.ko
If these modules are present in either /system/lib/modules or /data/lib/modules they will be automatically loaded at boot and are available to use (for example in case of CIFS, just get CifsManager from the marketplace and start mounting your shares)
+ Custom Bootanimation and Bootsound
This kernel also supports using a custom bootanim (bootanimation.zip) and bootsound (PowerOn.wav).
To install, simply create a folder "import" on in your /sdcard and drop your files into it, i.e.:
/sdcard/import/bootanimation.zip -> for bootanimation
/sdcard/import/PowerOn.way -> for bootsound
If either one of those is present upon the next boot they will automatically be installed to the correct path and be available.
+ Custom Boot-LOGO !
This let's you change the logo shown BEFORE the bootanimation (usually the "Samsung Galaxy SII" splash screen).
Similar to the bootanim and -sound, copy the desired logo.jpg (480x800, max. 100k) to:
/sdcard/import/logo.jpg
Upon the next boot the new bootlogo will be installed!
Please read the additional note about installing a new bootlogo bellow!
+ BLN support
This kernel has BLN (=BackLight Notification) support!
Just install the BLN Pro App from the market (to actually use/get the notification lights you need the paid version, the free version only lets you test if BLN works propperly) and off your blinkieness goes
+ Touchscreen Sensitivity Fix
vitalij's touchscreen fix to make the touch more responsive again when performing movements on the screen.
Click to expand...
Click to collapse
RAGEmod (RAvenGEr)
Links:
XDA Thread
Htcmania Thread (spanish)
Download:
RAGEmod v1.1b-U1
RAGEmod v1.1a-U1
RAGEmod v1.1-U1
RAGEmodv1-T30
RAGEmodv2-T27
RAGEmodv1-T27
RAGEmodv1-T26
Changelog:
U1 - v1.1a - minor update release.
- Increased touch sensitivity
U1 - v1.1b - minor update release.
- Init.d support
Summary:
- Version: v1.1b-U1
- Date: 15/07/11
- SetCPU: Yes
- OC: 1.400
- UV: Between 800 and 1400mV
- BLN: Yes
- Bootanimation: Yes
Author's notes:
My new kernel!
Will come in two flavours:
- U1 - based on Samsung Update1
- U2 - based on Samsung Update2 - not released yet.
Features:
- support for SetCPU OC (upto 1400MHz)
- UV between 800mV and 1400mV
- support for Boot Animation
- support for BLN
The goal of my first kernel was to take the battery savings gained from HardCORE's kernel and allow undervolting and underclocking to further improve battery life. I added Boot Animation and BLN support just because I could. This kernel adds to my previous kernels, taking bits and pieces from here and there also.
Thanks also to the authors of Ninphetamine kernel - their SetCPU supporting code was the basis for the SetCPU support in this kernel, I have also used BLN code from their Git Repository, thanks to creams.
Click to expand...
Click to collapse
Abyss (BigBang)
Links:
Official link
Download:
Abyss Kernel 1.7
Abyss Kernel 1.6
Abyss Kernel 1.5
Abyss Kernel 1.4
Changelog:
- Tutte le funzioni disponibili nel kernel Thunderbolt 3.1
- Aggiornata base a 2.6.35.13
- Importato tweak risparmio batteria da Abyss kernel per aosp
- Inserito trick che tiene sotto controllo il Deep sleep e lo forza dopo ogni 5 sec.
- Inserito un controllo del cambio di governor durante un cambio di stato
- Cambiate frequenze base 200 e 400 Mhz a 150 e 300Mhz per ulteriore risparmio batteria
- Fissato problema freeze e ravvii del kernel Abyss 1.1
- Cambiata ottimizzazione del kernel
Author's notes:
Inserita patch EXT4
Aggiunta RCU classica
Cambiate opzioni di ottimizzazione
Cambiati i livelli della luminosità
Aggiunto di default BFS cpu scheduler
Aggiunto smartass governor
Aggiunto V(R) i/o scheduler
Aggiornata initramfs alla versione XXKH3
Riaggiunta Recovery CW 4.0.1.4
Modificate frequenze (ora disponibili: 1536, 1400, 1304, 1200, 1100, 1000, 900, 800, 600, 500, 400, 200)
Inserito ReadAhead tweak
Inseriti small Tweaks in Conservative e Ondemand Governor
Abilitato di Default il BFQ V2 R1 i/o scheduler (possibili noop, deadline, cfq, bfq)
Abilitato BLN (attivabile tramite l'applicazione BLN Control)
Inseriti: Modulo cifs.ko, tun.ko, fuse.ko, ntfs.ko, nls_utf8.ko
Modificato valore battery polling
Click to expand...
Click to collapse
SiyahKernel (gokhanmoral)
Links:
Official link
Htcmania Thread (spanish)
Download:
SiyahKernel v1.7.8 rc2
SiyahKernel v1.7.7
SiyahKernel v1.7.4
SiyahKernel v1.7 final
SiyahKernel v1.7 rc3
SiyahKernel v1.7 rc1
SiyahKernel v1.6 sp1
Changelog:
SiyahKernel v1.7.8 rc2
min CPU UV value is set to 600mV.
removed bfq scheduler
increased internal voltage @1600MHz for stability
from now on, init.d scripts are executed after kernel's tweaks
automatic backup of efs data. you can find it in /data/.siyah. copy efsbackup.tar.gz and efsdev-mmcblk0p1,img files to a safe location. I hope you won't need them but if you do you will thank me
rooting script changes summary: rooting is done once and /data/.siyah/root-installed is created. if you want to reinstall root remove that file. all su and superuser.apk files are removed (and also related dalvik-cache) then device is rebooted. if you still have problems with superuser install CWM flashable su (download from http://goo-inside.me/superuser/ ).
updated recovery to CWM 4.0.1.5 (latest stable)
CWM flashable version wipes cache & dalvik-cache. first boot will take long time if you use CWM flashable version.
Author's notes:
Based on Samsung Update2 sources (deep sleep issue is fixed, hopefully)
compiled with gcc4.5.2
Auto-Root (just flash it onto a stock rom and you'll have root)
ClockworkMod Recovery v4.0.1.4
Boot animation support
Supports SetCPU (OC upto 1600MHz, UC downto 100MHz)
Supports undervolting (UV between 800 mV and 1500 mV)
Supports voltage control via SetCPU (thanks to netarchy, ninpo, hacre)
Stock voltages as default
smartassV2 governor
Default governor is ondemand (200-1200MHz)
Tweaked interactive governor
Tweaked ondemand governor
Compiler optimizations
Increased touch sensitivity
Touchscreen fix (thanks to vitalij)
increased battery polling interval
GPU clock and voltage control interface (thanks to netarchy). Example CWM-flashable /system/etc/init.d/99gpuv script (thanks to AndreiLux)
I/O Tweaks
automatic battery calibration. leave it connected to a charger overnight and the battery will be calibrated.
available I/O schedulers: V(R), noop, deadline, CFQ (default)
available cpu governors: ondemand, ondemandx, interactive, smartassV2(recommended and default), conservative, userspace, performance
/system/etc/init.d startup scripts support
Updated jhash to version 3
Increased charging speed.
BLN (thanks to creams), liblights is autoinstalled if the existing one doesn't support BLN
CIFS, SLQB, NTFS and several others that I forgot...
Click to expand...
Click to collapse
Lulz Kernel (tegrak)
Links:
XDA Thread
Htcmania Thread (spanish)
Download:
Lulz-Kernel-Build-14-Beta-1-for-I9100-XXKH3
Lulz-Kernel-Build-13-for-I9100-XXKH3
Lulz-Kernel-Build-12-for-I9100-XXKG6
Tegrak-Kernel-Build-26-for-I9100-XXKH3 (CWM Recovery not suported)
Tegrak-Kernel-Build-25-for-I9100-XXKG6 (CWM Recovery not suported)
Changelog:
Built with new I9100 source from OSRC (named Update2)
Author's notes:
*supports BLN
- thanks to creams and neldar.
- get the source from creams' blog http://creamsnexus.blogspot.com/
*supports clockworkmod recovery 4.0.1.4
- Thanks to codeworkx
*supports Lulzactive governor
*supports BFQ v2-r1 scheduler
*CPU scaling level is changed from 5 to 7 (1204/1152/1100/1000/800/500/200MHz)
*includes Tegrak Kernel functions
*based on GT-I9100 gingerbread_update1 source
*supports Interactive governor
*supports CIFS
Click to expand...
Click to collapse
SuperPower (Netchip)
Links:
Original Thread
Download:
SuperPower KI3 update8
SuperPower KI3 update7
SuperPower KI3 update5
Author's notes
Netchip´s kernel was terribly, there where thousand and one bugs.
Such max overclock to 1400 MHz, no GPU overclocking, bad scripts.
Scripts who works not, it was one big drama.
But it was also great, light, quick, not one fancy kernel.
And here I come to introduce my new kernel .
It is not a big drama, it is super, fixed some bugs by Samsung, CPU overclocking to 1.6 GHz, GPU overclocking, BFQ v2-r1, BLN, bootlogo, bootanimation and much more in the future .
I am inspired by Hacre, Chainfire and HellcatDroid.
Hellcat is very kind, and helps me with ex. the compile issue.
Also Hacre was nice together me, ex. the CPU overclocking code.
But now further on the kernel, the features
-Bootanimation support, place it in /system/media/bootanimation.zip
-Bootlogo, place it in /sdcard/getin, and give it the name, logo.png
-CPU overclocking till 1.6GHz
-GPU overclocking
-BFQ v2-r1
-Removed other schedulers
-Instant root
-Busybox
-Clockworkmod 5
-KI3 initramfs
-I use the "hidden" p12 partition as tmp, so if bootlogo dont work, lemme fix it
-Compiled with AOSP 4.4.0 toolchain
-BLN
-Init.d support - /system/etc/init.d/
-EFS backup script
-Touchscreenfix set to 5 - thanks to vitalij
It is newb friendly, you can flash it via Odin, and all is installed
Thus flash it via Odin!
Click to expand...
Click to collapse
FD's Kernel (FrozenData)
Links:
Original Thread
Download:
FD-Kernel_SGS2_v1.0b
FD-Kernel_SGS2_v1.0
Author's notes
Disabled unnecessary debugging and logging (logcat/dmesg) - for increased smoothness
OC/UV - CPU Freq range is 7 now (200/500/800/1000/1200/1400/1600)
Supports BLN
Touch sensitivity fix
Minor performance tweaks
CWM4
ROOT
Using Samsung Update2 source code
Using Chainfire's initramfs
Recommended Voltage:
OC/UV available with SetCPU or Voltage Controller.
1600MHz: 1350mV
1400MHz: 1250mV
1200MHz: 1200mV
1000MHz: 1100mV
800MHz: 1000mV
500MHz: 950mV
200MHz: 850mV
Click to expand...
Click to collapse
Mirage S2 (NeoPhyTe.x360)
Links:
XDA Thread
Download:
SGSII-2.6.35.7-MirageS2-v5
Changelog:
v5:
set samsung-update1 as base (fix reboots)
added slqb patch
removed bfq
Author's notes:
For XXKG1/G2/G3 (should work with olders too)
Modified Freq range 11 steps (200-400-500-600-800-900-1000-1200-1400-1504-1600 Mhz)
CPU UV sysinterface (thanks to ninphetamine)
Modified cpufreq.c to force processor to go step-by-step in freqs.
Default Freq: 500-1200 Mhz ondemand (the best to get low batt drain, should drain lower in sleep)
Lowest maximum freq blocked to 400mhz (so if you put 200-200, it will run 200-400, locked due to better performance)
Available governors: interactive-smartass-conservative-userspace-powersave-ondemand-performance (custom modded smartass, ondemand and interactive governors)
CFS Scheduler.
SLQB Allocator.
CFQ Block IO Scheduler (Available: no-op, deadline, cfq)
Modified Initramfs from saturn_de (thanks to him and Chainfire) - I've added some values to this init.rc to get lower battery drain and some performance. (some different from saturn)
CWM 4.0.0.2 Recovery
Disabled Profiling support and debugs, added ThumbEE, Improved Control Group Support.
Added some CFQ IO tweaks
Changed dalvikvm heapsize to 60m (this should improve performance on tasking)
Touchscreen fix added (thanks to vicenzo91)
Click to expand...
Click to collapse
CF-Root v4.1 (ChainFire)
Links:
XDA Thread
Htcmania Thread (spanish)
Download:
CF-Root-SGS2_XX_OXA_KH3-v4.1-CWM4
CF-Root-SGS2_XX_OXA_KH1-v4.1-CWM4
CF-Root-SGS2_XX_OXA_KG6-v4.1-CWM4
Changelog:
Updated to XXKH3
Author's notes:
The kernel is fully stock and taken from the original firmware, with just the following added:
Root
Superuser 2.3.6.1
Busybox v1.16.2androidminimal (from CWM)
Integrated CWM 4.0.0.2
Click to expand...
Click to collapse
Insecure Kernel (Odia)
Links:
XDA Thread
Download:
Download from original thread
Changelog:
Updated to XXKH1
Click to expand...
Click to collapse
Jeffrey-SpeedFrey (teksin)
Links:
XDA Thread (Thread closed. Under investigation)
Htcmania Thread (spanish)
Download:
SpeedFrey3.0.0 wA: Workaround version. (Try only if you have issues with Release Version)
SpeedFrey3.0.0 rV: Release version.
Changelog:
SetCPU compatible (1204/1150/1100/1000/800/500/200 mhz)
BFQ-V2 Scheduler added and set by default
838 MB ram memory available
Increased smoothness with ram optimization
Increased battery life when the phone is on sleep with cpufreq.c optimization
Disabled Config_bugverbose (more memory, better smoothness and better battery life)
Disabled Bug() (optimize memory usage, better smoothness and better battery life)
Unnecessary developer options disabled (optimize memory usage)
General optimization for battery life
Thanks to all beta testers
Author's notes:
Undervolted (CPU and GPU) (not compatible with the SETCPU control voltage because the kernel is optimized with my own values)
Workaround version available (less undervolted)
Stock voltage version available
SetCPU compatible (1204/1150/1100/1000/800/500/200 mhz)
BFQ-V2 Scheduler added and set by default
838 MB ram memory available
CIFS support (cifs.ko and slow-work.ko automatically integrated in "/lib/modules")
BLN support
Vitalij's touchscreen fix (value : 10)
Rooted
CWM 4.0.1.4
Interactive governor
Disable some debugging options / look changelog (better battery life, better ram usage and smoothness)
Some tweaks / look changelog (better battery life, better ram usage and smoothness)
Initd.d support
I/O scheduler tweaks
Low ram usage
Optimized for battery life
Click to expand...
Click to collapse
Sorry for my English, Leo.-
Read the bottom of my thread and respect my wishes - thank you!!!
and why this is in Original Development when you have just linked to others work?
Odia said:
Read the bottom of my thread and respect my wishes - thank you!!!
and why this is in Original Development when you have just linked to others work?
Click to expand...
Click to collapse
Sorry, did not mean to break your wishes. The links have been deleted. Sorry again.
About the selected section, I thought that since it was an original Development links, this was your site. If not, I can safely delete. No job is my, only collection of links so that users could see and compare the various kernel created by different cooks.
Sorry for my English, Leo.-
Sorry for a noob question but what is the SGS2 overclockable to?
Sent from my SPH-D700 using xda premium
JohnCorleone said:
Sorry for a noob question but what is the SGS2 overclockable to?
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
1.6ghz is the highest I've run it and really only for benchmarking purposes. 1.4ghz is stable for me.
Very nice work!
This thread should be sticked on top and updated regularly.
Very helpfull, thanx.
very comfortable, very comfortable!
This link might help you guys - http://knowmydroid.com/kernel/sgs2-custom-kernels
Very nice work and very helpfull!
Thanks
Nice work... Thx...
Very nice thankyou...
Sent from my GT-I9100 using XDA Premium App
In the OP is stated
Although he put in each kernel, how to load a kernel based on their extension usually is:
- TAR: It flashes by Odin or with the option Flash Kernel from CWM app.
- RAR: It flashes from the Recovery menu.
Click to expand...
Click to collapse
That "RAR" should be "ZIP".
petsasj said:
In the OP is stated
That "RAR" should be "ZIP".
Click to expand...
Click to collapse
Changed. Thanks
Un saludo, Leo.-
Great thread, but do anyone has the link to download a clockwork mod.apk?? My current rom does not come with the cwm app and I have to flash using odin only. Much thanks for whoever's help in advance.
Its not the ROM that supports CWM but the kernel. You have not given any details but how did you root your device. If you rooted it you should have CWM. Use chainfires kernel for the rom version you have and you will get the cwm pkg as well as root.
Ofcourse you have to flash it using odin. I hope you know how.
Sent from my GT-I9100 using XDA Premium App
ghostami said:
Great thread, but do anyone has the link to download a clockwork mod.apk?? My current rom does not come with the cwm app and I have to flash using odin only. Much thanks for whoever's help in advance.
Click to expand...
Click to collapse
I've never flashed kernel before rooting. Anyway, you can flash a kernel via odin (in PDA) and you will be the CWM.
Sorry for my English, Leo.-
samseud said:
Its not the ROM that supports CWM but the kernel. You have not given any details but how did you root your device. If you rooted it you should have CWM. Use chainfires kernel for the rom version you have and you will get the cwm pkg as well as root.
Ofcourse you have to flash it using odin. I hope you know how.
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
I used the stock root rom and gotten the cwm app, backup it with titanium backup
New kernel added:
Changelog:
U1 - v1.1a - minor update release.
- Increased touch sensitivity
- Init.d support
Sorry for my English, Leo.-
Great thread for beginners here - thx
Onequestion:
I plan to go from a stock, untouched i9100 to villainrom:
Is this the way to do it?:
- get and flash CF-root kernel to get root and CWM
- then flash ninphetamine 2.1.3 via CWM to be able to use my GLAS-protector
- download and flash villainrom 2.04 via CWM
Good plan? bad plan?
thx for help!
barnefko said:
Great thread for beginners here - thx
Onequestion:
I plan to go from a stock, untouched i9100 to villainrom:
Is this the way to do it?:
- get and flash CF-root kernel to get root and CWM
- then flash ninphetamine 2.1.3 via CWM to be able to use my GLAS-protector
- download and flash villainrom 2.04 via CWM
Good plan? bad plan?
thx for help!
Click to expand...
Click to collapse
Kernel must be the last one, because when you flash a rom, it overwrite your kernel.
Sorry for my English, Leo.-
Hello Everyone!
I am here to show you an AWESOME setting that I have on my phone. It's fast, sleek, smooth, and great battery life.
ROM:
- AT&T Samsung Galaxy S II Skyrocket CM7 #4
Kernel:
- Da_G CM7 Kernel
UC/UV
- 384MHZ/918MHZ
- Screen Off : Max : 702MHZ
- LAGFREE
- -37.5 Undervolt
Launcher:
- RoyalKnight's CM7 Launcher
SD Tweaks
- 2048 MB Cache
- I/O Scheduler : NOOP
Additional Edits:
- APN Trick (Over throttle)
alphadog32 said:
Hello Everyone!
I am here to show you an AWESOME setting that I have on my phone. It's fast, sleek, smooth, and great battery life.
ROM:
- AT&T Samsung Galaxy S II Skyrocket CM7 #4
Kernel:
- Da_G CM7 Kernel
UC/UV
- 384MHZ/918MHZ
- Screen Off : Max : 702MHZ
- LAGFREE
- -37.5 Undervolt
Launcher:
- RoyalKnight's CM7 Launcher
SD Tweaks
- 2048 MB Cache
- I/O Scheduler : NOOP
Additional Edits:
- APN Trick (Over throttle)
Click to expand...
Click to collapse
cool story bro
where did you get the ROM ... all links to in the dev section are broken
In Skyrocket Forums.
Hehe, your running all Skyrocket development... I'm running partial T-Mo dev. xD
ROM: Juggernaut 4.1
Kernel: Faux123 for SR @ 1.7GHz
UV: -87.5mV
Modem: T-Mo SGS II KL1 (I don't want LTE with a T-Mo ROM, framework is jacked)
B]About[/B]
Welcome to Team Kernalizers's SPRINT Thread. This thread will attempt to teach you and show you how to maximize the performance and battery life of your GS3 running the KT747 kernel by Ktoonsez.
In this thread, you will learn everything you need to know about Governors, I/O Schedulers, Underclocking (UC), Overclocking (OC), Undervolting (UV) and the KTweaker application. We will also provide you with pre-configured tweaks to use.
This is a friendly support community. You can post your benchmarks, battery stats, feedback and settings. We will also help troubleshoot any problems that you may encounter while using this kernel and our tweak packages.
RulesPlease consider these rules before using this thread:
1. Follow XDA Forum rules (http://forum.xda-developers.com/announcement.php?f=1712)
2. There will be NO FLAMING, NO SPAMMING, NO HARRASMENT of any kind. These will not be tolerated. You have been warned!
3. Search the thread first before asking questions. Most likely, your question may have been answered already.
4. If you are stuck and need help, DO NOT post comments like "this is not working". It will be ignored. You must provide necessary information like ROM Type (AOSP/TW), Kernel Version, OC, UV ...etc. You get the picture. The more you provide the better we can help
5. Please allow time for the team to find an answer if we can’t figure it out we know enough people to help us out finding a answer thank you
6. Be Patient We have our own personal lives outside of here. Allow the team some time to find answers. We will do our best to help.
7. If you post screenshots, you are allowed a maximum of 3 screenshots.
8. Keep posts/threads on-topic
By post in this thread, you are agreeing to the above rules.
Members
Galaxys3Man30
mw86
GTOJIM
Ramondal
clothednblack1
RErick
chinkybean
daniel4653
steelers_exe
crazymook
castle_bravo
luis86dr
MorphiousGX
TexasEpic4G for awesome banners he makes for us!!!!!
Supported DevicesAT&T Samsung Galaxy SIII : http://forum.xda-developers.com/showthread.php?t=2144004
Sprint Samsung Galaxy SIII: http://forum.xda-developers.com/showthread.php?t=2032956
T-Mobile Samsung Galaxy SIII: http://forum.xda-developers.com/showthread.php?t=2207286
Verizon Samsung Galaxy SIII: http://forum.xda-developers.com/showthread.php?t=2201555
Thanks
ktoonsez - For giving us this amazing kernel and the plethora of options available with it. His thread his here Make sure to thank him!
AT&T: http://forum.xda-developers.com/showthread.php?t=1756776
Sprint: http://forum.xda-developers.com/showthread.php?t=1800576
T-Mobile: http://forum.xda-developers.com/showthread.php?t=1871946
Verizon: http://forum.xda-developers.com/showthread.php?t=1853816
All of the Team Kernelizers members for their tweaks and dedication and help
All of the testers, and followers
All of the ROM developers out there for making our phones fun to use
And of course our Friendly Forum Moderator:
kennyglass123
DisclaimerTeam Kernalizers members, Ktoonsez, and ROM developers are not responsible for bricked devices or any other device issues you experience as a result of using information in this thread.
Every phone is different, especially since it was found that we have slow, nominal, and fast variations.
Tweaks provided are extremely experimental and should be avoided by beginners and people who have important responsibilities tied to the usage of their phone.
You Have Been Warned: Use of any information, tweaks and applications in this thread at your own risk. You assume full responsibility for your own actions.
Downloads
Team Kernelizers TweaksAll of our TK bin files will be available here:
From Phone: https://m.box.com/s/5hazifi3odci94uyykws/1/698338185
From PC: https://www.box.com/shared/5hazifi3odci94uyykws
Reporting ToolsHuge thanks to MorphiousGX for our live report form. Please report battery usages at these links.
We will use this information to help make better adjustments to our tweaks. It will collect the necessary information to make sure people compare apples to apples*
You can also view results after you submit, and filter on any of the questions asked (i.e. Tweaker's name, governor, release date..etc).
The form can be found here*https://docs.google.com/forms/d/1-uz...3jPpg/viewform
The results can be viewed here*https://docs.google.com/spreadsheet/...Xc&usp=sharing
If you have any feedback (good or bad) please feel free to let MorphiousGX know he maintains it and you all should thank him.
Team Kernelizers Proudly PresentsTK Mod 2.4
Download www.androidfilehost.com/?fid=23060877489998093
Features
Bin File Rename
Individual renaming of the following bin Files for battery savings:
gsiff_daemon
mpdecision
qosmgr
smd
smdexe
Renames bin files with .bak
Bin File Restore
Individual restoring of the following bin files:
gsiff_daemon
mpdecision
qosmgr
smd
smdexe
Restores bin files to their original state.
Mods
KT747 Bootanimation Fix:
Use only if bootanimation is broken. Usually occurs on TW Roms.
Team Kernelizers TouchWiz Build Prop Tweaks
Team Kernelizers AOSP Build Prop Tweaks
Restore of Original TouchWiz Build Prop
Restore of Original AOSP Build Prop
ChangelogLocated in TKMod zip
Contest Splash Screens
You now have access to all Team Kernelizers Contest Splash Screens in one zip!
1st Place Splash Screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2nd Place Splash Screen:
3rd Place Splash Screen:
4th Place Splash Screen:
5th Place Splash Screen:
6th Place Splash Screen:
7th Place Splash Screen:
8th Place Splash Screen:
9th Place Splash Screen:
10th Place Splash Screen:
11th Place Splash Screen:
Stock Splash Screen: Reverts to Original Splash Screen.
Thanks from luis86dr
Edgehood for answering all my questions about Aroma! Thanks buddy!
steelers_exe for his awesome splash screen for Aroma Installer.
RErick for his build prop updater script & for providing Splash Screen zips.
mw86 for his build prop tweaks.
GMan for testing and helping me. Also for providing mirrors!
decimalman for making the build prop script work!
Ktoonsez for such a awesome Kernel and inspiring us to do what we do.
Everyone who helped with testing!
Team Kernelizers for being so damn awesome!
Known BugsSplash Screens will only work on TouchWiz
Working on finding out the cause of these issues. Please report bugs in either of the Team Kernelizers threads.
This is still in Beta, more is yet to come!!!!!!
Kernel InformationGeneral Installation Instructions (for both TW and AOSP):1. Download correct version of kernel for your device and rom. This is important as you may brick your phone is you use the wrong version.
2. Flash kernel using your preferred recovery
3. Do the following AFTER installing the kernel and BEFORE you reboot your phone:
a. Clear cache
b. Clear dalvik
c. Fix Permissions
4. Reboot your device.
TW Specific Kernel Instructions:
(can be used with AOSP too)There are some files on your TouchWiz phone that need to be renamed in order to maximize the battery life of your phone. There has been some debate on whether or not this is necessary, but for now we would recommend renaming these files to ensure that there is no chance of excessive battery drain.
Part 1:
These steps are only necessary on TouchWiz ROMs, however you can also do this on AOSP as well:
1. You must have ROOT. You will need to have a root enabled file explorer on your phone (ES File Explorer works very well and you can get it from the play store (https://play.google.com/store/apps/details?id=com.estrongs.android.pop&hl=en). When you get it, open it up and go the the settings and scroll all the way down until you see the Root Settings. Go in there and enable ALL of the root settings.
2. After that is done, navigate to your root folders using the Folder Up icon at the top. Once you are in your root folders, navigate to /system/bin and locate the following files. You will need to rename them with a ".bak" at the end of the filename
gsiff_daemon --> gsiff_daemon.bak
mpdecision --> mpdecison.bak
qosmgr --> qosmgr.bak
smd --> smd.bak
smdexe --> smdexe.bak
Renaming these files will not harm your phone. Many users rename these files every time they flash a rom, and no damge is done.
Also, some ROMs come with these files renamed or deleted entirely, so if you don’t find a file, don’t be alarmed.
You have to do this every time you flash the ROM and/or Kernel.
If you feel uncomfortable doing this yourself, you can use the TK-MOD (see Downloads section) and it will handle this for you.
Part 2:
Stopping mpdecision from being called:
1. Open terminal emulator and type the following code:
su
2. When terminal emulator asks for root permission hit 'Grant' or 'Allow'.
3. At the # prompt type:
stop mpdecision
Using Rom Toolbox (https://play.google.com/store/apps/details?id=com.jrummy.liberty.toolbox) we will make a script that will stop mpdecision from being called at each boot so you don't need to use terminal emulator each time
1. Open Rom Toolbox and scroll down to the Scripter option
2. In the scripter, click the “+” button in the top right corner, then select 'Create'
3. Type a name for our new script, lets call it “stop mpdecision”
4. In the commands enter the following text:
#!/system/bin/sh
stop mpdecision
5. Hit the disk icon to save it
6. Select the script that you just created and a dialog box should pop up, select set at boot
Were done here
AOSP Specific Kernel Instructions:When coming from a 3.0 Kernel to a 3.4 Kernel there is a new method with kernel updates. Skipping these steps will cause phone instability, due to some bad data left behind. This is a flaw in the Android OS, not the application. You must follow the instructions below (Thanks ktoonzs for the new method of the ktweaker app)
1. Go to Settings on the phone
2. Go to app manager then all apps
3. Scroll down to ktweaker app n open it
4. Once open hit FORCE STOP and then hit CLEAR DATA
5. Reboot and flash your new update of ktoonzs kernel
6. Repeat steps 1-4 in the above “General Installation” section
You should be good to go after that
Resources & Useful Links
[*]Rescan Media Root (click link on phone and be sure to select launch link with play store)
https://play.google.com/store/apps/d...diascannerroot
[*]Kill Media Server (thanks for the link Jcdominguez)
http://www17.zippyshare.com/v/77111471/file.html
[*]Lux Auto Brightness (set brightness lower than stock minimum brightness on any rom)
https://play.google.com/store/apps/d...d=com.vito.lux
[*]Rom Toolbox Lite by Jrummy
https://play.google.com/store/apps/details?id=com.jrummy.liberty.toolbox
[*]Build Prop Editor free by Rom Toolbox maker Jrummy
https://play.google.com/store/apps/d...ld.prop.editor
[*]Swipe Pad (thanks Naddict) make a easy to launch multitask launcher from anywhere a shortcut to Developer Options (great for aosp Hwoverlay)
https://play.google.com/store/apps/d...ipepad.android
[*]Known Wakelocks thread (Thanks T. J. Bender)
http://forum.xda-developers.com/show...php?p=31974989
[*]DS Battery Saver Pro (manage radios like juice defender with less overhead) (thanks for the link AdamDelozier)
http://forum.xda-developers.com/show...php?p=35046431
[*]Battery Review Thread including extended batteries (Thanks Rlatjs17)
http://forum.xda-developers.com/show...php?p=30478980
[*]Fast Reboot (closes/restarts apps and services similar to rebooting without a reboot)
https://play.google.com/store/apps/d...streboot&hl=en
[*]Better Batter Stats (track all forms of wake locks) (Thanks Sven Knispel)
https://play.google.com/store/apps/d...erbatterystats
[*]Carat (track and discover battery drain prone apps)
https://play.google.com/store/apps/d....carat.android
[*]Seeder 2.0.0b1 (Thanks Lambgx02)
http://forum.xda-developers.com/showthread.php?p=592
[*]Cpu Spy (check used mhz and deep sleep usage) (Thanks Brandon Valosek)
https://play.google.com/store/apps/d...valosek.cpuspy
[*]Universal Initd Support APK (Thanks RyuInferno) (enable check for initd support)
http://forum.xda-developers.com/show....php?t=1933849
[*]Lag Fix(fs-trim) (use trim to trim blocks labeled deleted from storage where blocks are still full) (thanks AuxLV)
http://forum.xda-developers.com/show...&postcount=122
[*]CrossBreeder Combo MOD (combines three discussed entropy lag/lockup tweaks)
http://forum.xda-developers.com/show...php?p=37062006
[*]Flashable Recoveries (please thank Naddict for this amazing resource)
http://forum.xda-developers.com/show...php?p=35741601
[*]If you flashed the KT747 kernel separate from your ROMs installer, you can enable the boot animations by following the directions in this thread:
http://forum.xda-developers.com/show...22&postcount=4
[*]This is a link to the Better Battery Stats thread. This app is only free to XDA members, but I strongly encourage you to donate. And please hit the thanks button while you are there.
http://forum.xda-developers.com/show....php?t=1179809
[*]Schedulers and Governors explained:
http://forum.xda-developers.com/show...php?p=19846276
http://forum.xda-developers.com/show...php?p=26884853
President of {Team Kernelizers}
Im Gman and I approve this message
Re: [Team Kernelizers] {how to} Ktoonsnative governor and I/O tweaks {Aroma TK MOD 1.
*Users with Ktweaker settings reseting: Freezing system tuner and or rom toolbox is a possible fix for either min/max mhz, scheduler or governor resetting in Ktweaker. Another way could be making a backup of your settings, clear data on ktweaker, reboot and restore settings twice as not all apply right first time and reboot again with restore settings immediately at boot.
*Ktweaker Issues if on Kt747 Kernel: could have issues on roms like Freegs3 and it is noted that if you prefer to use Ktweaker to set your settings vs script than make sure no conflicting script is running for example check /system/etc/initd/ for 70tweaks and remove or place somewhere for safe keeping to prevent conflicts with Ktweaker for example min max changing or voltage tables, governor or scheduler. This script in the example is Freezas script to set phone based on screen on and off and current battery level for example of some of its functions, there is nothing wrong with using scripts nor is there a problem with this script in particular. Just be aware there will be conflicts if used in conjunction with Ktweaker and or setcpu and the like.
Ktoonservative governor presets from our thread
BALANCED PERFORMANCE BATTERY LIFE (no order)
Ktoonservative 50 30 67 68 Freecharlesmanson tunables
Ktoonservative 50 30 85 80 docnas tunables
Ktoonservative 33 11 99 35
Ktoonservative 42 11 99 99
Ktoonservative 75 11 95 75 tunables
HIGH BATTERY SAVINGS (no order)
-#*note#* (you can get away with one of these high threshold tunings and not feel laggy by using touch booster set to 384mhz on booster one and for touch two 486mhz which should help response time on any interactive action where in you touch the screen and immediately resume the normal minimum mhz as during touch boost the cpu still ramps based on load over the touch boost values if and as needed. It provides less frequency steps to target frequency during interactive use)*! 384/486 being conservative and 702mhz touch boost 1 756mhz touch boost 2 for more response and still will not be over target frequency during interactive use.
Ktoonservative 75 90 95 99 single core
Ktoonservative 85 94 95 99 single core 12 31 2012
Ktoonservative 60 35 97 75 Castle Bravo
Ktoonservative 60 35 90 70 Daniel4653
Ktoonservative 65 45 99 99 tunables
Ktoonservative 65 55 99 99 tunables old revision
Ktoonservative 65 45 97 95 Castle Bravo
SCHEDULERS
Jcdominguez chart
[Light usage] SIO> ZEN> NOOP> Deadline > BFQ > CFQ [medium/heavy usage]
************
Battery Saving:
-Noop: best battery savings for all mobile but not the best data rates. Considered a simple i/o
-SIO: similar to noop but uses a little more battery with benefit of some deadlines.
-Zen: Combo of noop, sio and deadline.
Balanced:
-BFQ: a good balance of battery and performance.
*tuning for solid state storage
# Freecharlesmanson tunables original
# MW86 tunables (use if above tuning resets ever time)
Performance with battery secondary:
-Row: fastest latencies on reads over all governors but may have the highest battery drain. Read Over Write.
#performance tuning Castle Bravo
-Schedulers/Governors Explained (thanks droidphile) (thanks for link Clothednblack)
http://forum.xda-developers.com/showthread.php?p=19846276
(thanks Grift) (thanks for link Clothednblack)
http://forum.xda-developers.com/showthread.php?p=26884853
Extra low Voltage Table:
! #@$ do not try this table if you have not tried the one in post one above. This is much lower and likely not okay for every phone but has been a non issue on mine and for a few others.
2106mhz: 1290 mV
1998mhz: 1260 mV
1890mhz: 1225 mV
1809mhz: 1200 mV
1728mhz: 1175 mV
1674mhz: 1160 mV
1512mhz: 1150 mV
1458mhz: 1145 mV
1404mhz: 1140 mV
1350mhz: 1135 mV
1296mhz: 1125 mV
1242mhz: 1110 mV
1188mhz: 1100 mV
1134mhz: 1085 mV
1080mhz: 1075 mV
1026mhz: 1035 mV
972mhz: 1025 mV
918mhz: 1010 mV
864mhz: 1000 mV
810mhz: 985 mV
756mhz: 975 mV
702mhz: 935 mV
648mhz: 925 mV
594mhz: 910 mV
540mhz: 900 mV
486mhz: 885 mV
384mhz: 880 mV
192mhz: 875 mV
144mhz: 870 mV
96mhz: 865 mV
Low Rider Volt Table
-note may not be stable using the same volts but a higher maximum mhz
-if the above table or the one in post one are not stable do not attempt to load these
-Thanks goes to Clothednblack1
1242 MHz - 995mV
1188 MHz - 975mV
1134 MHz - 950mV
1080 MHz - 945mV
1026 MHz - 930mV
972 MHz - 915mV
918 MHz - 910mV
864 MHz - 855mV
810 MHz - 850mV
756 MHz - 835mV
702 MHz - 820mV
648 MHz - 805mV
594 MHz - 835mV
540 MHz - 825mV
486 MHz - 805mV
384 MHz - 785mV
192 MHz - 775mV
144 MHz - 765mV
96 MHz - 700mV this may be too low for some
General Tips for faster UI
-enable Hwoverlay and force gpu rendering (leave out Hwoverlay on touchwiz to prevent a noted video playback issue)
-Disable animations and transitions on launcher (or set to as fast as possible)
-Use Launcher options to force launcher into memory like in Nova Launcher (Thanks Pberge)
Create localprop and force app in memory thanks nonato
- Go to terminal type su hit enter
-Type all of the following and hit enter to add an app to local.prop and force it in memory. Nova Launcher would be as follows. If local.prop doesn't exist the command will create it.
echo sys.keep_app_1=com.teslacoilsw.launcher-1 >> /data/local.prop
-(Thanks nonato for posting this trick in Seeder thread.)
Fix Gtalk fully disable if it was removed and causing a wakelock (needs credit need to find poster of this)
Cyanogenmod Based tweaks
-enable memory management options
-disable dithering (dithering on smooths color transitions off can show a banding effect) (if not on a CM based rom the use dithering 0 build prop has same effect)
-16bit transparency (close to half the bandwidth needed for 24/32bit color)
Rename these files on Touchwiz as pictured in System/Bin to prevent unnecessary battery drain (thanks for pic Jcdominguez)
Thread on Touchwiz safe to remove apps GS3 (Thanks Vegas Rooted)
http://forum.xda-developers.com/showthread.php?p=32212501
User suggestions for removable apps (Touchwiz)
Stop MPDECISION on a 4.2.1 Rom
- Navigate like in this pic to system/etc
- Open initpostboot.sh
- Go to line 223 (i use droidedit free at play store to edit the file it makes it easy to find line numbers)
- Place cursor in front of mpdecision and insert a #. Save the file and exit and reboot. Thats all thats necessary to prevent stopping mpdecision from starting or showing errors over and over in logcat on Android AOSP 4.2.1.
-*Credit goes to Decimalman thank you
Info on ROW Scheduler
http://lwn.net/Articles/509829/
-*Thanks CastleBravo
BUILD PROP
-tested on Freegs3(4.1.1), Goodness(4.1.1)rom, Paranoid Android(4.1.2), Chemistry(4.1.1), Unofficial AOKP(4.2.1), PACman(4.1.2), Cm10.1 nightly(4.2.1), Kiljoy(4.1.1)
- Build prop i use and has been tested on 4.1.1/4.1.2/4.2.1
- Gtojim and I are running these without issues. Tested on freegs3, cm10.1, Paranoid android and PAKman (#*has not been tested with Morphology need feedback*#)
-credit for the build props goes to Rom Toolbox and an XDA member Custodian. Thank you Custodian.
http://db.tt/q7S1s8yp
- Directions same as other build props we have listed. Until we have an easy install script this is for advanced users only who already have experience editing build.prop. I will always suggest using rom toolbox to do so vs manually editing your build prop file. Do not add all of them in without checking if the value exists already. You don't want double lines that one says the line and true and the other false, its hard to say but one may override the other. THIS IS NOT A BUILD PROP IT IS A SIMPLE TEXT FILE WITH ALL THE ONES I USE. THE BUILD PROP ENTRY IS TO THE LEFT OF THE EQUAL SIGN AND THE VALUE USED IS TO THE RIGHT OF THE EQUAL SIGN. YOU MUST SEARCH AND REPLACE OR ADD THEM MANUALLY.
-whats included in the build prop list:
debug.composition.type=gpu
debug.egl.hw=1
debug.mdpcomp.maxlayer=2
debug.sf.hw=1
debug.performance.tuning=1
debug.sf.nobootanimation=1 (set to 0 to reenambe Bootanimation or do not use this build prop)
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
debug.qc.hardware=true
ro.HOME_APP_ADJ=1
video.accelerate.hw=1
windowsmgr.max_events_per_sec=256
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-fma2dp=false
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-rtsp=true
media.stagefright.enable-record=false
mot.proximity.delay=20
movfilter=40
move_hyst=0
lpa.decode=false
lpa.use-stagefright=false
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.hprof.vid.fps=25
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ro.telephony.call_ring.delay=400
ro.ril.disable.power.collapse=0
ro.config.nocheckin=1
ro.config.hwfeature_wakeupkey=0
ro.lge.proximity.delay=20
ro.min_pointer_dur=8
ro.max.fling_velocity=15000
ro.min.fling_velocity=4000
ro.mot.eri.losalert.delay=900
ro.HOME_APP_MEM=8192
ro.FOREGROUND_APP_MEM=6144
ro.VISIBLE_APP_MEM=8192
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
ro.cwm.enable_key_repeat=true
dalvik.vm.checkjni=false
dev.pm.dyn_samplingrate=1
drm.service.enable=false
persist.hwc.mdpcomp.enable=false
persist.gps.qmienabled=true
persist.sys.use_dithering=0
persist.sys.scrollingcache=3
per_sec=300
com.qc.hdmi_out=true
com.qc.hardware=true
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
dalvik.vm.heapidealfree=8388608
dalvik.vm.heapconcurrentstart=2097152
ring.delay=0
TCHTHR=28
ENFORCE_PROCESS_LIMIT=false
wifi.supplicant_scan_interval=300
AOSP only
dalvik.vm.heaptargetutilization=0.25
Touchwiz Only
dalvik.vm.heaputilization=0.25
Systctrl settings via Init.d (requires kernel with init.d support or enable initd with RyuInfernos apk link at bottom) (tested on same roms as Build Prop)
- * Thanks Zeppelinrox for talking some settings over with me.
- Help entropy pool
- read_wakeup_threshold to 1366
- write_wakeup_threshold to 128
http://db.tt/NilQsqG6
- Init.d for systctrl with the above set already and other optimized values
- Here guys this one is without anything special for entropy the values related to it are set to default on this one
- read_wakeup_threshold 64
- write_wakeup_threshold 128
- randomize_va_space 2
http://db.tt/rHcNuTfR
- Instructions:
Download. Using a file explorer, i like es file explorer go up from internal storage with a root explorer till you are at / you should see system, sys and much more. Go to /system/etc/initd/ and paste this file in there. Select it and go to properties of the file and select permissions. Change them to rwxrwxrwx. In other words enable read, write and execute for the three options user, system and other or whichever they are called. Now exit and reboot. Now at boot systctrl are applied. These are the presets system tuner sets plus a few tweaks by Freecharlesmanson (if you see him please be sure to give him thanks) and a fix for entropy where noted above.
- What is changed in the two systctrl (initd commands are as follows in the above files except the settings mentioned) (you can pick and choose and make your own initd script):
#!/system/bin/sh
echo "524288" > /proc/sys/fs/file-max
echo "32000" > /proc/sys/fs/inotify/max_queued_events
echo "256" > /proc/sys/fs/inotify/max_user_instances
echo "10240" > /proc/sys/fs/inotify/max_user_watches
echo "10" > /proc/sys/fs/lease-break-time
echo "64" > /proc/sys/kernel/random/read_wakeup_threshold
echo "128" > /proc/sys/kernel/random/write_wakeup_threshold
echo "65536" > /proc/sys/kernel/msgmax
echo "2048" > /proc/sys/kernel/msgmni
echo "10" > /proc/sys/kernel/panic
echo "'500 512000 64 2048'" > /proc/sys/kernel/sem
echo "268435456" > /proc/sys/kernel/shmmax
echo "524288" > /proc/sys/kernel/threads-max
echo "2" > /proc/sys/kernel/randomize_va_space
echo "10485760" > /proc/sys/net/core/optmem_max
echo "8388608" > /proc/sys/net/core/rmem_default
echo "65536" > /proc/sys/net/core/wmem_default
echo "524288" > /proc/sys/net/core/rmem_max
echo "524288" > /proc/sys/net/core/wmem_max
echo "'10485760 10485760 10485760'" > /proc/sys/net/ipv4/tcp_mem
echo "1" > /proc/sys/net/ipv4/tcp_no_metrics_save
echo "1" > /proc/sys/net/ipv4/tcp_rfc1337
echo "0" > /proc/sys/net/ipv4/tcp_ecn
echo "'6144 87380 524288'" > /proc/sys/net/ipv4/tcp_rmem
echo "1" > /proc/sys/net/ipv4/tcp_tw_recycle
echo "'6144 87380 524288'" > /proc/sys/net/ipv4/tcp_wmem
echo "35" > /proc/sys/vm/dirty_ratio
echo "40" > /proc/sys/vm/dirty_background_ratio
echo "5" > /proc/sys/vm/swappiness
echo "900" > /proc/sys/vm/dirty_expire_centisecs
echo "300" > /proc/sys/vm/dirty_writeback_centisecs
echo "100" > /proc/sys/vm/vfs_cache_pressure
echo "95" > /proc/sys/vm/overcommit_ratio
echo "3" > /proc/sys/vm/page-cluster
echo "4096" > /proc/sys/vm/min_free_kbytes
echo "3" > /proc/sys/vm/drop_caches
Recommended Juice Defender Setup - (Thanks Clothednblack)
Resources/Apps
#############
- Rescan Media Root (click link on phone and be sure to select launch link with play store)
https://play.google.com/store/apps/details?id=com.addz.mediascannerroot
- Kill Media Server (thanks for the link Jcdominguez)
http://www17.zippyshare.com/v/77111471/file.html
-Lux Auto Brightness (set brightness lower than stock minimum brightness on any rom)
https://play.google.com/store/apps/details?id=com.vito.lux
-Build Prop Editor free by Rom Toolbox maker Jrummy
https://play.google.com/store/apps/details?id=com.jrummy.apps.build.prop.editor
-Swipe Pad (thanks Naddict) make a easy to launch multitask launcher from anywhere a shortcut to Developer Options (great for aosp Hwoverlay))
https://play.google.com/store/apps/details?id=mobi.conduction.swipepad.android
-Known Wakelocks thread (Thanks T. J. Bender)
http://forum.xda-developers.com/showthread.php?p=31974989
-DS Battery Saver Pro (manage radios like juice defender with less overhead) (thanks for the link AdamDelozier)
http://forum.xda-developers.com/showthread.php?p=35046431
-Battery Review Thread including extended batteries (Thanks Rlatjs17)
http://forum.xda-developers.com/showthread.php?p=30478980
-Fast Reboot (closes/restarts apps and services similar to rebooting without a reboot)
https://play.google.com/store/apps/details?id=com.greatbytes.fastreboot&hl=en
-Better Batter Stats (track all forms of wake locks) (Thanks Sven Knispel)
https://play.google.com/store/apps/details?id=com.asksven.betterbatterystats
-Carat (track and discover battery drain prone apps)
https://play.google.com/store/apps/details?id=edu.berkeley.cs.amplab.carat.android
-Seeder 2.0.0b1 (Thanks Lambgx02)
http://forum.xda-developers.com/showthread.php?p=592
-Cpu Spy (check used mhz and deep sleep usage) (Thanks Brandon Valosek)
https://play.google.com/store/apps/details?id=com.bvalosek.cpuspy
-Universal Initd Support APK (Thanks RyuInferno) (enable check for initd support)
http://forum.xda-developers.com/showthread.php?t=1933849
-Lag Fix(fs-trim) (use trim to trim blocks labeled deleted from storage where blocks are still full) (thanks AuxLV)
http://forum.xda-developers.com/showpost.php?p=37029420&postcount=122
-CrossBreeder Combo MOD (combines three discussed entropy lag/lockup tweaks)
http://forum.xda-developers.com/showthread.php?p=37062006
-Flashable Recoveries (please thank Naddict for this amazing resource)
http://forum.xda-developers.com/showthread.php?p=35741601
President of {Team Kernelizers}
Im Gman and I approve this message
Re: [Team Kernelizers] {how to} Ktoonsnative governor and I/O tweaks {Aroma TK MOD 1.
Reserved
President of {Team Kernelizers}
Im Gman and I approve this message
Re: [Team Kernelizers] {how to} Ktoonsnative governor and I/O tweaks {Aroma TK MOD 1.
Reserved
President of {Team Kernelizers}
Im Gman and I approve this message
First! for iSaint!
(I've always wanted to do that)
Re: [Team Kernelizers] {how to} Ktoonsnative governor and I/O tweaks {Aroma TK MOD 1.
Expanding are we?
Team Kernelizers; Kernel tweaking at its finest.
Re: [Team Kernelizers] {how to} Ktoonsnative governor and I/O tweaks {Aroma TK MOD 1.
Sweet awesome to see
http://i1202.photobucket.com/albums/bb374/TexasEpic/ThePeoplesROM-KennyGlass123/daniel4653.png
Re: [Team Kernelizers] {how to} Ktoonsnative governor and I/O tweaks {Aroma TK MOD 1.
Told yall the work load is fixing to get heavier lnao
President of {Team Kernelizers}
Im Gman and I approve this message
Re: RadarFree for Pocket PC
well
Sent from my LG-LU6200 using xda app-developers app
Re: [Team Kernelizers] {how to} Ktoonsnative governor and I/O tweaks {Aroma TK MOD 1.
galaxys3man30 said:
Told yall the work load is fixing to get heavier lnao
President of {Team Kernelizers}
Im Gman and I approve this message
Click to expand...
Click to collapse
Haha maybe you could have let someone take over the att ? Lol
http://i1202.photobucket.com/albums/bb374/TexasEpic/ThePeoplesROM-KennyGlass123/daniel4653.png
Re: [Team Kernelizers] {how to} Ktoonsnative governor and I/O tweaks {Aroma TK MOD 1.
daniel4653 said:
Haha maybe you could have let someone take over the att ? Lol
http://i1202.photobucket.com/albums/bb374/TexasEpic/ThePeoplesROM-KennyGlass123/daniel4653.png
Click to expand...
Click to collapse
Lol ur right buddy I'm sure we will get penalty of help
President of {Team Kernelizers}
Im Gman and I approve this message
Re: [Team Kernelizers] {how to} Ktoonsnative governor and I/O tweaks {Aroma TK MOD 1.
tx.takenori said:
well
Sent from my LG-LU6200 using xda app-developers app
Click to expand...
Click to collapse
Well what?
President of {Team Kernelizers}
Im Gman and I approve this message
Re: [Team Kernelizers] {how to} Ktoonsnative governor and I/O tweaks {Aroma TK MOD 1.
Bump
7000 lemons? wtf!?!
Re: [Team Kernelizers] {how to} Ktoonsnative governor and I/O tweaks {Aroma TK MOD 1.
Thanks guys. I just used aroma this morning. Will report back with questions.
sent from Task & KT JB AOKP ROM
Re: [Team Kernelizers] {how to} Ktoonsnative governor and I/O tweaks {Aroma TK MOD 1.
New method with kernel updates you have to force stop ktweaker app and then clear data if it is done a different way it will not clear data it will leave some bad data behind its a flaw in the OS n not the app itself so I will write you a step by step on how to do this
Thanks ktoonzs for the new method of the ktweaker app
Ok here we go
Step 1: goto settings on the phone
Step2: goto app manager then all apps
Step3: scroll down to ktweaker app n open it
Step4: once open hit FORCE STOP and then hit CLEAR DATA
Step5: now reboot and flash your new update of ktoonzs kernel and all should be good to go after that
P.S. This has to be done before flash every new kernel update
Thanks again ktoonzs for the new info
President of {Team Kernelizers}
Im Gman and I approve this message
Just renamed /system/bin/smd and added .bak extension and now I've somehow lost root or atleast my apps that require root have all stopped functioning. Just tried to delete the new smd.bak file via ADB but that's not working so I'm trying a Nandroid now
Re: [Team Kernelizers] {how to} Ktoonsnative governor and I/O tweaks {Aroma TK MOD 1.
Jordayum said:
Just renamed /system/bin/smd and added .bak extension and now I've somehow lost root or atleast my apps that require root have all stopped functioning. Just tried to delete the new smd.bak file via ADB but that's not working so I'm trying a Nandroid now
Click to expand...
Click to collapse
Interesting. Those files have been renamed for ages and I've never heard of someone losing root. I do know that sometime super su acts weird
7000 lemons? wtf!?!
I'm thinking it borked SuperSU's path or something.. Nandroid fixed it anyhow
Re: [Team Kernelizers] {how to} Ktoonsnative governor and I/O tweaks {Aroma TK MOD 1.
Jordayum said:
I'm thinking it borked SuperSU's path or something.. Nandroid fixed it anyhow
Click to expand...
Click to collapse
I agree. Try reinstalling su or supersu from the market
7000 lemons? wtf!?!
Re: [Team Kernelizers] {how to} Ktoonsnative governor and I/O tweaks {Aroma TK MOD 1.
New 1.0.2 update for TK Mod coming soon. Has some nice new goodies.
Team Kernelizers; Kernel tweaking at its finest.
Welcome to F4Kernel
. Performance . Stability . Speed . All - in - One .
Disclaimer :
Code:
#include /*
* Your warranty is now void. *
* This kernel is 100% guaranteed won't eat your pet cat (or dog, it doesn't matter) *
* No guaranteed this'll explode your device, be careful, follow the instructions ! *
* DON'T point at me if your alarm dies after flashing this kernel ! *
*/
Current feature :
CM10 / AOSP 4.1.2 based ROM :
- Based on Linux Kernel 3.4.10
- Overclock up to 1300 Mhz (1300 Mhz stable !)
- Underclock up to 61 Mhz
- 1Ghz Undervolt
- GPU Overclock
- Supports LZ4 and Google Snappy compression
- 404 MB userspace RAM
- 14 governors, including :
- smartassv2
- interactive
- conservative
- ondemand
- userspace
- wheatley
- powersave
- smartassH3
- performance
- smartmax
- darkside
- intelliactive
- smoothass
- brazilianwax
- 10 I/O schedulers. List :
- noop
- deadline
- cfq
- bfq
- sio
- fiops
- row
- sioplus
- zen
- vr
- Frontswap, zRAM, Zsmalloc with lots of patches
- Optimizations, lots of optimizations to make it fast
- Fully tweaked I/O schedulers, faster read write access
- Backports from latest stable and mainline Linux Kernel
- Many tweaks to ensure it's solid fast
- Working deepsleep
Stock ROM [Only Alpha] :
- Based on LG latest source (v20b)
- Overclock up to 1.3 Ghz (1228 Mhz is stable, 1.3 Ghz is unstable)
- Underclock up to 128 Mhz
- Undervolt @ 1 Ghz frequency
- GPU Overclock
- 404 MB userspace RAM
- 10 governors, including :
- smartassv2
- interactive
- conservative
- ondemand
- userspace
- wheatley
- powersave
- smartassH3
- performance
- smartmax
- 9 I/O schedulers. List :
- noop
- deadline
- cfq
- bfq
- sio
- fiops
- sioplus
- vr
- zen
- Frontswap, zRAM, qcache and Zsmalloc with patches
- Smooth performance
Feature for future :
- 4.4.4 (KitKat) support [Currently working on this]
- MIUI ROMs support [Almost done]
- More, I guess
Bugs :
- None, tell me if there's one !
INSTALLATION :
1.) Flash the zip
2.) Reboot
3.) Enjoy !
Github
Note : Select correct version, if your phone is P700 select P700 !
Latest downloads is always here
Credits :
- TeamHackLG (base)
- CyanogenMod (defconfig, ROM, etc)
- Optima Team (being a great team, and always there to support me)
- skyinfo (supports me, always !)
place holder
Good work brother.
Congratulations on your first source build.
Hoping for a L5 version once all features are added to L7.
You can try adding some features from Pink's kernel by pinkflozyd
Good luck!
Sent from my Moto G XT1033 using Tapatalk
skyinfo said:
Good work brother.
Congratulations on your first source build.
Hoping for a L5 version once all features are added to L7.
You can try adding some features from Pink's kernel by pinkflozyd
Good luck!
Sent from my Moto G XT1033 using Tapatalk
Click to expand...
Click to collapse
Will look at his github for more info, thanks
BTW, built a new version with OC, undervolt, and more ! check out on download page
Wow,great work brother and big respect from me! [emoji106]
GREETZ FROM TEAM-OPTIMA!!!
So really this can work in CM11 also???
pkatsaras said:
So really this can work in CM11 also???
Click to expand...
Click to collapse
He told he planned to add Kitkat support on this kernel, I guess it can ! It would be amazing !
Sent from my Nexus 7 using XDA Free mobile app
F4uzan said:
Feature for future :
- zRAM, frontswap, zCache
- 4.4.4 (KitKat) support
- MIUI ROMs support
- More, I guess
Click to expand...
Click to collapse
My bad. Now I saw that it is future feature!
KK support will be on future, guys
I'm working on current feature first
Another new version is up ! I've fixed few bugs, added bfq I/O scheduler and smartmax governor
Also, I've fixed few bugs too.
Thih kernel is for stock rom? I m on v20d and i can flash this kernel?thx
Послато са LG-P700 користећи Тапаток 2
toske81 said:
Thih kernel is for stock rom? I m on v20d and i can flash this kernel?thx
Послато са LG-P700 користећи Тапаток 2
Click to expand...
Click to collapse
Sorry, but no you can't flash it. I'm creating a version for stock ROM, it won't be long until it's out.
OKAY ! Big news !
I've got the stock version booting with following features :
- 1.3 Ghz overclock
- SIOPLUS, ZEN, VR, SIO, and DEADLINE I/O scheduler
- 404 mB userspace RAM
But, a bad news for the stock version is WiFi doesn't work. I'll search for a fix soon.
I ll wait your wifi fix
Послато са LG-P700 користећи Тапаток 2
thaks
F4uzan said:
OKAY ! Big news !
I've got the stock version booting with following features :
- 1.3 Ghz overclock
- SIOPLUS, ZEN, VR, SIO, and DEADLINE I/O scheduler
- 404 mB userspace RAM
But, a bad news for the stock version is WiFi doesn't work. I'll search for a fix soon.
Click to expand...
Click to collapse
Its a good news.Will you relise this beta to test?
Nicolas W said:
Its a good news.Will you relise this beta to test?
Click to expand...
Click to collapse
Yes, I'll. I'll release it after a few bugfix, it'll be today.
#F4UZAN : Team Optima
Okay, I'm done with the stock version. WiFi might work on some firmware and some won't.
Anyone here is volunteering to test the stock version ?
F4uzan said:
Okay, I'm done with the stock version. WiFi might work on some firmware and some won't.
Anyone here is volunteering to test the stock version ?
Click to expand...
Click to collapse
I can test, I have 20H .
Nicolas W said:
I can test, I have 20H .
Click to expand...
Click to collapse
P705 ? I'll prepare the .zip soon, I'll send it via PM.
#F4UZAN : Team Optima
thaks
F4uzan said:
P705 ? I'll prepare the .zip soon, I'll send it via PM.
#F4UZAN : Team Optima
Click to expand...
Click to collapse
Yes. p705