[REVIEW] UAG (Urban Armor Gear) Cases For HTC One - One (M7) Accessories

As promised, I've finished my in-depth written review with a ton of close ups for those of you who asked in the video comments. If I missed anything you'd like me to follow up on just let me know and I'll be more than happy to include it.
Choosing a case that fits your personality is a unique experience. With so much competition and such awesome designs, it becomes harder and harder each year deciding how you're going to protect your precious investment. I bought the HTC One because I was taken back by the attention to detail and settling on a sub-par case would only do it an injustice. I've been sporting the Outland and Navigator cases by Urban Armor Gear for a little over a week now and all of my expectations have pretty much been blown out of the water.
DESIGN
The moment I took them out of their packaging, my initial reaction revolved around how light they felt in the hand. I knew before I even received them in the mail that the actual design was going to be extremely aggressive and it didn't disappoint. The exposed torx screw heads give an industrial touch that I had never seen before on any case. I'm almost positive they're not real screw heads but it is deceptively convincing plastic and you can't argue how rugged they make the case look and feel.
The inside is lined with a honeycomb texture which molds perfectly into the hard plastic. There's no danger of the materials accidentally damaging your phone thanks to the awesome quality control employed by UAG in their manufacturing process. Not a single excess piece of material is left protruding from the inside of the case or from any of the drilled cut outs.
The back of the case doesn't retain the curved back of the device which may be good news for those of you who like texting on a table. They incorporated small pegs on each of the back corners to help with skid protection while on a flat surface and they have worked really well for me so far.
It's important to note that my favorite feature of this case by far has been the easy to press volume buttons. They're not stiff in the slightest and provide an awesome tactile response when adjusting the sound. The power button on the other hand is a slightly different story, it works fabulous when your finger is directly centered above it but if you're off by just a little it becomes a wrestling match to try and get it to register your push. This may or may not be due to the raised design they chose to go with to incorporate a slit for the IR signal to flow through but it can get a bit annoying when you're in a hurry to turn on your device and your finger doesn't land perfectly on top.
The last thing worth mentioning is a fabulous addition to the charging port cutout. They recessed a thin wall of the rubberized silycon/TPU with a perfect rectangle around the entrance for the USB charging head. If you pick up any other case you may have lying around I'd bet the opening leaves plenty of room for you to accidentally miss and scratch up the chamfered edge or polymer lining on the HTC One but that isn't possible on the UAG cases. It is impossible to miss much less scratch the port surroundings and that is a huge advantage in my opinion. No one wants to see nicks or scratches on their aluminum device especially ones caused by such a frequent and necessary act.
I'm not quite sure what inspired UAG to come up with their signature design but when I look at the Navigator case all I can think of is my uncle's H2 Hummer. Everything from the groves on the doors to the black bumpers and especially the chromed out nameplate which UAG happens to mold into the back of the case with a brushed aluminum look.
Check them out side by side:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BUILD QUALITY
There should be no doubt that these UAG cases are a tank when it comes to protection. I literally just slammed the white one multiple times into a sharp corner of my dining table (I'm sure my wife wouldn't approve if she found out) and apart from some wood stain transferring onto my Navigator case, there is absolutely no damage. The color that did transfer easily came off with a little spit and a shirt rub.
If you didn't catch me saying it in the video, these are composite cases which means they mold two different materials into a single piece allowing them to shave off weight and thickness while maintaining the full benefits of dual layers of protection.
The drilled holes for the camera and the flash give about a 2.5mm clearance and are the most accurately made of all the cases I have ever reviewed. You see absolutely nothing but glass when the phone is installed and that in itself is a major accomplishment.
The case wraps around the phone slightly providing about 2mm of face down protection so no need to worry about your screen getting scratched but just in case you have your doubts, UAG has included a high quality HD screen protector with every case. It's cut about a millimeter short of complete glass coverage but the quality of it is good enough to where I wouldn't send you off to buy a name brand one.
Color options include the following:
Outland (As seen here)
Navigator (As seen here)
Scout
Aero
CONCLUSION
I have a very short list of cases I would deem appropriate for business and pleasure and both the UAG Navigator and Outland are now on that list. They look phenomenal and provide unbelievable protection in a form fitting design. I would hope to see additional colors in the future so if you're like-minded feel free to drop them a line. Their lineup for the HTC One retail for $34.95 and standard shipping is included for free via USPS. I know I've seen many comments on the YouTube video saying that you decided to purchase thanks to my review so please let me know what you think of it if its already arrived.
Enjoy the pics:

Was creating another thread really necessary? Lol...anyways, thanks for the video.
Sent from my HTC One using xda premium

babymatteo said:
Was creating another thread really necessary? Lol...anyways, thanks for the video.
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
Why would I post on the other thread when I've got my own set of opinions and content.
I plan on editing the first post after I've used the phone a few days and compiled an in-depth written review accompanied by close up pictures as I've done with every other review thread I've made.

That looks like it adds some bulk to the phone

vapor said:
That looks like it adds some bulk to the phone
Click to expand...
Click to collapse
Yeah after looking at the video post-production I noticed that it made it look huge but trust me its not that bad. I would compare it to the Seidio Active or the Incipio DualPro CF or Shine (not the original DualPro) in thickness. It really feels nice in the hand.

ChrisM0678 said:
Yeah after looking at the video post-production I noticed that it made it look huge but trust me its not that bad. I would compare it to the Seidio Active or the Incipio DualPro CF or Shine (not the original DualPro) in thickness. It really feels nice in the hand.
Click to expand...
Click to collapse
It's definitely a lot slimmer than the dual pro. I have both, and the dual Pro feels pretty massive in the hand. The UAG is significantly less offensive to hold on to.
Sent from my HTC One using xda premium

_MetalHead_ said:
It's definitely a lot slimmer than the dual pro. I have both, and the dual Pro feels pretty massive in the hand. The UAG is significantly less offensive to hold on to.
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
Yeah the original DualPro is a tank. I wouldn't recommend against it but you have to need top of the line protection to justify the bulk and weight. Not to mention the lip is considerably larger than most other cases out there. In my personal opinion, UAG takes the cake. Now I'm not sure I would say the same between the DualPro CF and the UAG cases, they're both really nice in the hand.

ChrisM0678 said:
Why would I post on the other thread when I've got my own set of opinions and content.
I plan on editing the first post after I've used the phone a few days and compiled an in-depth written review accompanied by close up pictures as I've done with every other review thread I've made.
Click to expand...
Click to collapse
Lol just trying to give you a hard time.
Anyways, do you prefer the UAG over the Otterbox Commuter series more? For protection but not adding too much bulk.
Sent from my HTC One using xda premium

I'm honestly not sure, I haven't gotten my hands on the Commuter

babymatteo said:
Lol just trying to give you a hard time.
Anyways, do you prefer the UAG over the Otterbox Commuter series more? For protection but not adding too much bulk.
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
I prefer my UAG over my Commuter.

As promised, I've updated the post, hope you guys enjoy the close up images. Thanks!

I appreciate your video reviews, and this one is no different.
However I do think there is some merit in having one thread for the various cases. Everything UAG in the UAG thread, Dual Pro in the Dual Pro thread. Not really anything against you, it's just that XDA has this awful problem of duplication.

CocheseUGA said:
I appreciate your video reviews, and this one is no different.
However I do think there is some merit in having one thread for the various cases. Everything UAG in the UAG thread, Dual Pro in the Dual Pro thread. Not really anything against you, it's just that XDA has this awful problem of duplication.
Click to expand...
Click to collapse
I completely agree with you about wishing everything could be self contained but unfortunately the current setup isn't catered to product review sub-forums. The whole reason people including myself review a product is to assist as many people as possible in making an educated purchasing decision. That would not be feasible if I posted on page 12 of someone else's thread primarily because XDA members are notorious for only reading the first and last page of any given thread.
You may also say that they could search if they were really interested in finding all of the available material on a specific case but the Search feature on XDA only brings up thread titles so that would be of no help if I buried it on a different thread. I honestly don't think its that big of a deal. To date there are only 4 UAG case reviews, 2 of them are purely video based, 1 is purely text based and mine is both. They all have something unique to offer so I don't see the big deal.
I will ultimately let the mods have the last word and if they wish for me to consolidate I will happily do so.

For what it's worth, I have no issue with there being a second thread for this great case. Like Chris said, it would be difficult for people to see his review if it was on page 12 of my thread. He clearly spent a lot of time putting his review together, he deserves to have it seen by as many people as possible. Not to mention this review is far better/more comprehensive than my own.
We can all live in harmony :good:

_MetalHead_ said:
For what it's worth, I have no issue with there being a second thread for this great case. Like Chris said, it would be difficult for people to see his review if it was on page 12 of my thread. He clearly spent a lot of time putting his review together, he deserves to have it seen by as many people as possible. Not to mention this review is far better/more comprehensive than my own.
We can all live in harmony :good:
Click to expand...
Click to collapse
+1
Sent from my Black HTC One running Maximus7

how does the case feel ? does it feel like a hard plastic ? or like a metallic plastic ?

readz_one said:
how does the case feel ? does it feel like a hard plastic ? or like a metallic plastic ?
Click to expand...
Click to collapse
Definitely a hard plastic.

Anyone here getting flash photo wash-out using the white UAG case like I am? Going to call tomorrow and see if they have any comments or suggestions.
My case looks just like yours OP. White ring cutout around the lens and flash. Thought at first maybe it was supposed to be black.

Lauski said:
Anyone here getting flash photo wash-out using the white UAG case like I am? Going to call tomorrow and see if they have any comments or suggestions.
My case looks just like yours OP. White ring cutout around the lens and flash. Thought at first maybe it was supposed to be black.
Click to expand...
Click to collapse
Haven't had to take any flash pictures but let me try to take a few and get back to you.

Had a UAG case for my Note II when I still had it. It was a great case; I might be picking one of these up. Liking both colors so far...

Related

Review of DBA Cases Complete Ultra w/pics!!!

This is a review of DBA Cases Complete Ultra for Note 2: http://www.dbacases.com/ultra-complete.html?SID=99e6f1d35efbe84a83ca89bb6514fdbd
You gotta have a lot of confidence to introduce a new Note 2 case 6+ months after the release of this popular phone. And in such over-saturated market with so many cases - in addition to confidence you also have to bring something new to the table in order to stand out from the crowd. Although DBA Cases has already established themselves with Ultra Complete series for iPhone 5 and S3, let's find out if they were able to pull this task with Note 2.
I don't have any previous experience with Ultra Complete series, so this was the first time I got a chance to test these. The case itself is a dual-layer design. I will talk more in details about each layer further in my review, but DBA took this dual-layer concept to a next level by offering a selection of 4 unique colors for its outer Ultra PC layer and 5 unique colors for its inner Ultra TPU layer where you can buy each one separately or in predefined combos as part of Ultra Complete. This way you no longer locked into the same color combination and able to mix'n'match different PC/TPU colors to dress up your N2 for any occasion. For the review purposes, I requested samples with Blue/Lime and Red/White combos to see how these will look with my white Note 2. In the pictures below, I took snapshots of different variations interchanging pieces of these two combos to give you an idea of how it works.
Now about the case itself. The combo of PC/TPU is very lightweight; on my scale it was 38g (1.4 oz). Inner TPU layer is thin, yet feels very durable. Typically similar dual-layer design cases have inner silicone sleeve for shock absorption which is usually too soft and pulls around the edges. This one is made out of a more rubbery material and holds better around the edges, although you do get some pull next to volume buttons (due to the large cutout). All the cutouts are very precise and aligned perfectly. Power/Volume are not covered, and cutout around those areas makes it very easy to access corresponding buttons. This inner TPU layer can even be used by itself. In addition to back matte finish, the side grip and bottom parts of the case which are outside of outer layer are thicker and glossy. The sides actually offers a very nice textured design for an additional grip - a very important detail. For an enhanced protection, this Ultra Complete design adds an outer PC layer. And let me tell you, I never seen anything like this. This is definitely not your typical Polycarbonate plastic material. First of all it has a very nice rubbery-soft coating which is anti-scratch, thanks to its triple coated process. For the test purpose, I tried to scratch it with my nail, driving it deep into the material - not a chance. Apparently this PC is some advanced Flex material which according to DBA used in bullet resistant glass and cockpit canopy of F-22 Raptor Jet Fighter. I know it's a mouthful, but I was able to completely bend it without snapping it in pieces and it flexed back to its original shape like brand new. I took a picture of that as well. So pretty much it's designed to flex instead of breaking if you drop the case. I also want to mention that this outer layer offers a very decent back and corner protection once assembled together with inner TPU layer. Also, captured in pictures, you get an acceptable lip around edges of the phone so you don't have to worry about putting it face down on the surface. I wish the lip would have been a little bit bigger since I'm using thicker tempered glass screen protector which leaves less margin. But in general, you can put your phone down on it's face without a worry of screen touching the surface or phone sliding across the surface. The same goes for outer layer which adds some nice friction where you don't have to worry about phone sliding across the slippery surface.
Overall, I was very pleased with this product. It's not just another dual layer variation of a typical phone case. From all the reading about this case and talking to Scott (the brain behind this product), I found out how much work went into the design and the selection of the material which made me appreciate it even more. Now, would I consider this to be a rugged case or for active outdoor use? Not really. I think its great for everyday typical use with a decent drop protection to give you a piece of mind. This case would definitely suit anybody who is looking for a thin lightweight case and was considering TPU but also needed something with a better grip and a drop protection. Ultra Complete fits this category perfectly!
Now, here are the pictures. First two shots had flash on which I corrected later by turning it off for the rest of the pictures where you can get a more accurate colors.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I wanna know your secret for getting all these review samples lol. I'm going broke from buying all my stuff. Keep buying new cases every week or so. Usually buy 3 or 4 at a time. You do have the best reviews around tho. Most people think 2 sentences and a few pics equals a review.
☆SoA: Son's of Android™☆
I like to break stuff!
Contact the manufacturer directly. Explain to them what you do and why. Show some examples of your work. "This is the biggest part, they want verification you are actually doing what you say your going to do." Request said product for review.
Back when I worked for ATT I used to do this for Incipio. I would test the product and write reviews on a couple different websites for them. People always trust the review from a user over that off the manufacturer. And the non professional photos help because you actually can trust them.
But regardless Vectron, awesome review and I think im going to pick one of these up.
Sent from my SPH-L900 using xda app-developers app
-EViL-KoNCEPTz- said:
I wanna know your secret for getting all these review samples lol. I'm going broke from buying all my stuff. Keep buying new cases every week or so. Usually buy 3 or 4 at a time. You do have the best reviews around tho. Most people think 2 sentences and a few pics equals a review.
Click to expand...
Click to collapse
Well, I think you answered your own question with that last sentence of how NOT to approach the review if you want to request a sample It's not just about get freebies, you have to build a portfolio of consistent work so manufacturers would trust you. And in general, its a lot of actual work. I can't even get into YT reviews because of lack of free time. Kris summarized it very well in his post above.
Btw, I do feel somewhere guilty when I read feedbacks about people liking my reviews so much they are saving money to buy more N2 accessories. I know it's your money to spend, and I'm probably somewhat guilty of having a more optimistic review outlook, although pictures can't lie Keep in mind, a lot of my reviews are based on first impression out of the box, and I do try to come back later and update posts with a more longer term impression. For those who already have these or even a similar product for another phone, and been using it for awhile - I would really appreciate a follow up comments/feedback with your own impressions either if you like it or hate it. I send review links to all the manufacturers and they do closely monitor these. So any positive or negative feedback will be extremely useful for them to improve the product.
Thanks for the review. I ordered blue and lime. Looks great and I need something slim with some sort of drop protection so I am very excited about this one.
Sent from My Note 2
Vectron, how is this case compare to UAG? Are they in same category? Which one you prefer?
How thick is it compared to your usual TPU case?
sithjedi333 said:
How thick is it compared to your usual TPU case?
Click to expand...
Click to collapse
With an exception of a slightly thicker side grips and bottom portion (the parts outside of PC layer) everything is on par with a typical TPU case.
VitaliyUvakin said:
Vectron, how is this case compare to UAG? Are they in same category? Which one you prefer?
Click to expand...
Click to collapse
These are not in the same category, so it will be hard to compare. Although not exactly similar design, I would put this in Case-Mate Tough category because of inner rubber tpu and outter PC shell and being slim, although Ultra has an advantage of full inner layer coverage and better outer PC layer material. Also, option of different color combinations is a big plus. To be honest, for my specific needs I prefer UAG because of a thicker bumper and my use outdoors and in the lab at work. Also, I do so many reviews of different accessories that I'm in constant need to take case on'and'off where I prefer one molded piece design. But in comparison, UAG doesn't have as friendly grip due to it's squared off design and it's customization with a vent insert is not as bold as being able to interchange TPU and PC on Ultra.
I will probably still go with UAG based on your reviews, since it has another advantage over ultra : it fits in seidio convert holster.
VitaliyUvakin said:
I will probably still go with UAG based on your reviews, since it has another advantage over ultra : it fits in seidio convert holster.
Click to expand...
Click to collapse
I just tested it out, and Ultra fits with CONVERT holster (a bit loose though, but secure due to it's spring-loaded latch) and ACTIVE holster (like a glove). What I forgot to mention in my previous reply the main reason why a thicker bumper of UAG is more important for me because I have thicker tempered glass protection.
To be honest, in a situation like this when you are split in between two cases - order both, test it out, and keep the one that you like. You never know, sometime you play around with each, and then realize they both are keepers Hopefully my reviews will help you to narrow it down out of the whole bunch of available cases, but at the end you will have to make your final decision because everybody has different needs and priorities.
I refuse to buy ACTIVE holster I just got my CONVERT today, UAG is coming tomorrow.
Note to self: stop reading vectron's reviews, spending way too much on accessories
Just received my blue and lime and it is awesome. I have 11 cases total and this is by far the best. Not mich bulk and looks like good enogh protection. Colors aee better than pictures
Sent from My Note 2
I almost convinced. ..
For those interested in purchasing... promo code "olympics" gets u 20% off...and "ultra15" gets u $15 off two complete ultra cases...they don't combine though
Sent from my GT-N7105 using xda premium
Promocode is good for direct site, or will on Amazon?
VitaliyUvakin said:
Promocode is good for direct site, or will on Amazon?
Click to expand...
Click to collapse
Sorry for not specifying..its only good on their direct site...I havent tried it on amazon or anything although ive heard that they honor it sometimes
Sent from my GT-N7105 using xda premium
chillaxnphilx said:
Sorry for not specifying..its only good on their direct site...I havent tried it on amazon or anything although ive heard that they honor it sometimes
Sent from my GT-N7105 using xda premium
Click to expand...
Click to collapse
i just ordered on amazon. the promotion for "olympics" works. it takes off 20% ($5.60) per case.
Seems that DBA Cases got more colors in stock. From what I see on their website:
PC: Black, Blue, White
TPU: Black, Lime, Pink, Tangerine, White
Complete: Black/Black, Blue/Black, Blue/Lime, Poppy/Snow, Poppy/Tangerine, Snow/Black,
So you can either get a predefined combo, or choose your own combo with mix'n'match of PC and TPU.
FYI - The Note II Black/Black and White/Black Note II combo's are now for sale. Also you can now buy the Black, Blue and White PC separately - www.dbacases.com
Black looks awesome!!!!!
Sent from my SCH-I605 using xda app-developers app

[REVIEW] Urban Armor Gear for the HTC One

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Those who know me from the One X forums here know that I have a bit of a problem when it comes to purchasing cases- I can’t stop. I held a bunch of giveaways for the cases I didn’t use, and I still have about 20 of them sitting in a box. My problem was that I just couldn’t find the perfect case. I loved a lot of them, but I wouldn’t call any of them “perfect”. The same thing happened to me when I switched to the iPhone 5. My problem was compounded by the fact that there are just so many iPhone cases to choose from and I just had to have them all. I had purchased roughly 30 different cases before I came across the Urban Armor Gear case and it was quite literally the last case I ever bought. Well, maybe not literally because after purchasing my black UAG case I had to have one in white and moss as well. Not only that, I bought one for each of the guys that I work with and it became the official unofficial case of our company. I generally prefer my phones naked, but in the case of the iPhone, it felt incomplete without the UAG case on it. Once I put my UAG case on the iPhone, I NEVER took it off. Fast forward to present time and much to my excitement, Urban Armor Gear has a case for the HTC One and I must say- it’s every bit as good as the iPhone version and then some.
The UAG is a composite case with a hard outer shell fused to an impact resistant soft core, and has an awesome body armor pattern to it that makes it look and feel like a military device. There is also a faux bolt pattern that further adds to its rugged looks. The corners have added bumpers for extra protection. The designers of this case definitely deserve some props. While that look may not be everyone's cup of tea, it is EXACTLY what I am looking for in a case. It's badass.
Holding it in your hand, you can just feel the quality of this thing, it is the most well designed case I have ever come across, for ANY phone. As far as protection is concerned, I would group it with other composite cases like the OtterBox Commuter, Incipio DualPro (which I own for the One), and CaseMate Tough. Unlike those cases which are all two pieces, the UAG is a single piece allowing it to be much slimmer and less bulky than any of the others, without sacrificing durability or protection at all. In fact, I actually feel more comfortable with my phone in the UAG case than any of the others. I work a rough job and the potential to damage my phone lurks around every corner. I have zero concerns about the safety of my phone when it is protected with the UAG case.
A major problem that I have come across with cases for the One so far is the way that the power button/IR flasher is handled. Some cases block it completely, others have a complete cutout leaving the button fully exposed and making it uncomfortable to press. Neither is acceptable to me. The UAG case has no such problem. The design team really put their heads together with this one, and came out with an incredibly simple, yet ingenious design- they gave the case a raised power button for easy use, but cut a hole in it so the IR signal can still get through. Whoulda thunk it?? There is literally no decreased IR functionality and the power button is easier to press than without the case. Again, it’s brilliant.
There really isn’t much else to say about it, it’s hands down my favorite case ever (which says an AWFUL lot) and since it became available so soon after the phone’s launch it will probably save me a great deal of money and headaches because I’m not even searching for another case now. Crazy, right? There is not a single thing I would change about this case. It is currently available in 4 color varieties- Navigator (white), Scout (black), Outland (rust), and Aero (slate). I currently have the Navigator and have a Scout on its way.
The UAG strikes the perfect balance between design, comfort, functionality, and protection. It earns a PERFECT 10/10 stars and a wholehearted recommendation from your friendly neighborhood MetalHead. \m/
Get the UAG case from Urban Armor Gear’s website- http://www.urbanarmorgear.com/collections/htc-one
could you please post photos of your one with the cover on?
Sent from my GT-I9300 using xda premium
b3ndech0 said:
could you please post photos of your one with the cover on?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Here ya go. The last one shows how they handled the power button/IR flasher.
i happen to love the industrial look too ordered the Navigator a few days back! Thanks for your review!
samuelong87 said:
i happen to love the industrial look too ordered the Navigator a few days back! Thanks for your review!
Click to expand...
Click to collapse
Industrial was the word I was looking for haha. Glad you have good taste in cases!
Sent from my HTC One using xda premium
I had a UAG Aero case for my GS3 and absolutely loved it. Glad to see they're starting to ship for the HTC One. I will be ordering on as soon as they show up on Amazon. Can't say enough good things about this case. Love the finish and the way the buttons are easier to press.
Great review! I actually dig the look of the case it compliments the phone very well! It reminds me of a crazy PC case in some way.
dmm5157 said:
I had a UAG Aero case for my GS3 and absolutely loved it. Glad to see they're starting to ship for the HTC One. I will be ordering on as soon as they show up on Amazon. Can't say enough good things about this case. Love the finish and the way the buttons are easier to press.
Click to expand...
Click to collapse
This is literally the only case I've ever bought that I have ZERO bad things to say about. If you loved it for the GS3 you'll definitely love it for the One.
Sent from my HTC One using xda premium
_MetalHead_ said:
Those who know me from the One X forums here know that I have a bit of a problem when it comes to purchasing cases- I can’t stop. I held a bunch of giveaways for the cases I didn’t use, and I still have about 20 of them sitting in a box. My problem was that I just couldn’t find the perfect case. I loved a lot of them, but I wouldn’t call any of them “perfect”. The same thing happened to me when I switched to the iPhone 5. My problem was compounded by the fact that there are just so many iPhone cases to choose from and I just had to have them all. I had purchased roughly 30 different cases before I came across the Urban Armor Gear case and it was quite literally the last case I ever bought. Well, maybe not literally because after purchasing my black UAG case I had to have one in white and moss as well. Not only that, I bought one for each of the guys that I work with and it became the official unofficial case of our company. I generally prefer my phones naked, but in the case of the iPhone, it felt incomplete without the UAG case on it. Once I put my UAG case on the iPhone, I NEVER took it off. Fast forward to present time and much to my excitement, Urban Armor Gear has a case for the HTC One and I must say- it’s every bit as good as the iPhone version and then some.
The UAG is a composite case with a hard outer shell fused to an impact resistant soft core, and has an awesome body armor pattern to it that makes it look and feel like a military device. There is also a faux bolt pattern that further adds to its rugged looks. The corners have added bumpers for extra protection. The designers of this case definitely deserve some props. While that look may not be everyone's cup of tea, it is EXACTLY what I am looking for in a case. It's badass.
Holding it in your hand, you can just feel the quality of this thing, it is the most well designed case I have ever come across, for ANY phone. As far as protection is concerned, I would group it with other composite cases like the OtterBox Commuter, Incipio DualPro (which I own for the One), and CaseMate Tough. Unlike those cases which are all two pieces, the UAG is a single piece allowing it to be much slimmer and less bulky than any of the others, without sacrificing durability or protection at all. In fact, I actually feel more comfortable with my phone in the UAG case than any of the others. I work a rough job and the potential to damage my phone lurks around every corner. I have zero concerns about the safety of my phone when it is protected with the UAG case.
A major problem that I have come across with cases for the One so far is the way that the power button/IR flasher is handled. Some cases block it completely, others have a complete cutout leaving the button fully exposed and making it uncomfortable to press. Neither is acceptable to me. The UAG case has no such problem. The design team really put their heads together with this one, and came out with an incredibly simple, yet ingenious design- they gave the case a raised power button for easy use, but cut a hole in it so the IR signal can still get through. Whoulda thunk it?? There is literally no decreased IR functionality and the power button is easier to press than without the case. Again, it’s brilliant.
There really isn’t much else to say about it, it’s hands down my favorite case ever (which says an AWFUL lot) and since it became available so soon after the phone’s launch it will probably save me a great deal of money and headaches because I’m not even searching for another case now. Crazy, right? There is not a single thing I would change about this case. It is currently available in 4 color varieties- Navigator (white), Scout (black), Outland (rust), and Aero (slate). I currently have the Navigator and have a Scout on its way.
The UAG strikes the perfect balance between design, comfort, functionality, and protection. It earns a PERFECT 10/10 stars and a wholehearted recommendation from your friendly neighborhood MetalHead. \m/
Get the UAG case from Urban Armor Gear’s website- http://www.urbanarmorgear.com/collections/htc-one
Click to expand...
Click to collapse
you just sold it to me :good: free int. shipping too:good:
ant78 said:
you just sold it to me :good: free int. shipping too:good:
Click to expand...
Click to collapse
Sweet man! Happy to help!
Nice review looks awesome to me , wish it had a holster.....:good:
Philly Jim said:
Nice review looks awesome to me , wish it had a holster.....:good:
Click to expand...
Click to collapse
I used the seidio active holster with it when I used my iPhone 5 and it was an exact fit, as if the holster was designed for the UAG case. I'm wondering if it'll be the same with the One. I just might take one for the team and give it a shot.
_MetalHead_ said:
I used the seidio active holster with it when I used my iPhone 5 and it was an exact fit, as if the holster was designed for the UAG case. I'm wondering if it'll be the same with the One. I just might take one for the team and give it a shot.
Click to expand...
Click to collapse
Let me know if you're able to take one for the team if it fits I can stop my exhaustive search thanks in advance.........
Philly Jim said:
Let me know if you're able to take one for the team if it fits I can stop my exhaustive search thanks in advance.........
Click to expand...
Click to collapse
Any coupons or discounts available on this? Definitely looks like a great case, but $35 is a bit rich.
Philly Jim said:
Let me know if you're able to take one for the team if it fits I can stop my exhaustive search thanks in advance.........
Click to expand...
Click to collapse
I'll order it tomorrow from Amazon, hopefully it will be delivered before the end of next week because I'm heading out of town for a month. If it comes before I leave I'll be sure to let you know.
broadwayblue said:
Any coupons or discounts available on this? Definitely looks like a great case, but $35 is a bit rich.
Click to expand...
Click to collapse
Not sure. Usually Amazon has them cheaper but they aren't available yet, only from UAG's website. Give it time.
Hey MetalHead ..I see you from Illinois. I'm from Chicago..then moved up to Wisconsin to get away from all those crazy gangs...but anyways, how long did it take you to receive the case after you ordered it? I'm thinking about ordering the case.
I have one of these for my Note 2 a awesome case! I just ordered the Aero in Blue I hope it doesn't take to long lol. I to am a case Wh*** as weel MetalHead but UAG has really impressed me with their quality I am using otterbox commuter right now which is not bad but UAG are just so nice !
Manitobamonster said:
I have one of these for my Note 2 a awesome case! I just ordered the Aero in Blue I hope it doesn't take to long lol. I to am a case Wh*** as weel MetalHead but UAG has really impressed me with their quality I am using otterbox commuter right now which is not bad but UAG are just so nice !
Click to expand...
Click to collapse
Hey, I'm stuck between the Commuter and the UAG. Do yu think yu could do a comparison review when yu get the UAG? Really help me out!
Hi,
Nice sounding review, makes me want one Can I ask one thing though, is it possible that you take a picture of the One lying naked on a flat surface with the case lying next to it? To give us an accurate guage of the thickness of the case and how much it would add to the phone. Coming from a 4 inch incredible S, I don't want something thats too bulky
Thanks
I had one of these cases for my S3 and the only thing i didn't like was the edges were kinda sharp which made the case kinda uncomfortable to hold in one hand. Does this one have those same rough edges?
Sent from my HTCONE using xda premium

Moto X Bumper Case - a quick overview.

So I've seen a few people talking about bumper cases for the Moto X, but few people seemed to jump at them, and as far as I've seen, no pictures have been posted of the case actually ON the phone. Well, I wanted to explore some alternatives to a full case, and this would give people who use MotoMaker an alternative.
First, I purchased the case off of Amazon for $6.99 shipped. It comes in a few colors. I chose black on black. The case shipped quickly and arrived quickly via USPS.
http://www.amazon.com/Slick-Shell-P...&qid=1381544095&sr=8-3&keywords=moto+x+bumper
Please note, I only just received my Moto X and bumper case today. I haven't had a chance to activate the phone, and won't be doing so since I'm heading out shortly. Still, I need to nerd out a bit with this phone, so I'm writing a short case review. Note, however, that I can't say say if the case affects the function of the phone at all, but I highly doubt it. I will update with my thoughts once I get the thing activated.
Overall impressions: The case is quite nice. Minimal, provides protection for the corners, face, and back, and looks pretty good. It appears to be matte TPU with a thin piece of hard, glossy plastic to help hold it together. Here are a few pictures of the case itself:
This first photo is just the front of the bumper case, followed by a picture from the back. As you can see, it does have a little tab. I'm not sure what this is for.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And here we have all the ports cut out of the sides of the bumper case.
The buttons on the side of the case. I've never really cared for buttons on my cases and have cut them off of every TPU case I've had. We'll see how these fair shortly...
As far as I know, the following is the first picture of a Moto X actually sitting in this case. The case slips on pretty easily but sits snugly enough that I have no concerns of it sliding off.
Here's the back. You can see the tab once more. Again, I don't know why it's there, but it, surprisingly, doesn't bother me. I also quite like the "stairstep" that the case does. Just ads a nice flow to it.
The top cutouts align as expected.
As does the bottom cutout.
A picture of the buttons. They're actually VERY well done. I'm surprised at how pleasant they are to press and how solid they feel. You'll notice that they also stick out from the rest of the case just slightly. The recess around them also helps give a nice overall feel.
Here's the phone sitting screen down. The front of the case provides protection for the entire face of the phone.
And the phone sitting on its back to give you an idea of how far the case extends above the screen.
Finally, here's a picture from the side of the phone sitting on its back. From what I can tell, the back of the phone just BARELY sits above the table. I believe (although I can't tell for certain) that the case is the only thing making contact with the table. This seems like it should protect the back of the phone from scratches if it's sitting with the back down, but I can't be completely certain. I'd still do my best to avoid sliding the phone on its back just to be safe.
Conclusion: The case fits very well with properly aligned cutouts, looks quite nice, and seems to provide all of the protection that I wanted. It extends past the screen to protect it if the phone is face down, covers all sides and corners to help protect against drops, and seems to elevate the back JUST above whatever surface it's sitting on (I am not positive on this last statement though). It looks good, feels good, and allows you to enjoy the feel of the back of the phone and that Moto X dimple. If you have a MotoMaker version, this is probably the best way to show it off and keep it protected in my opinion.
As I said, I haven't actually USED the phone with the case on since I haven't had the time to activate it yet. I will be doing so tomorrow or Sunday (tomorrow's a busy day), and I will come back with any important updates.
If anybody wants to know anything more about the case or see different pictures, please ask and I'll see what I can do to provide what you're looking for. It just might take me a day or two, so check back.
Great review and thanks
Sent from my Nexus 7 using XDA Premium 4 mobile app
Vanilla Tarantino said:
If anybody wants to know anything more about the case or see different pictures, please ask and I'll see what I can do to provide what you're looking for. It just might take me a day or two, so check back.
Click to expand...
Click to collapse
wow thank you so much for this! I've been trying to find a good bumper case since I have a motomaker-made X, and this post has a ton of great info! A few requests:
Do you plan on removing the covers for the buttons? I would really like my purple ones to shine through, but I'm not sure how it'd work with a case like this...
once you've used the phone a bunch, do you think you could comment on how it feels with vs without the case? I really like the way this phone feels naked, but it's also very smooth and prone to slipping... does the case help with that?
thanks so much and welcome to the X-Zone! Enjoy your new phone!
Thanks OP for this much needed information!
The last picture seems to suggest that the curved back makes the bumper less protective...from what I can see, the phone sits on the table, not the bumper. Nevertheless, the bumper does provide some needed protection.
I also ordered one after days of hesitation. Mainly I ordered a gold skin from DBrand and really wanted to show-off will remember to post the pictures once I have both of them on the phone.
Here is the blue one on white moto x.
Sent from my XT1055 using Tapatalk 4
I have this case and while I really like it, I have gone back to another because the buttons stick out so much that I keep bumping them. I have to really pay attention when i put it in my pocket that i don't turn it on. This may be silly, but it is a change from the other cases I've had.
I wonder how well it would fit if I cut out the buttons.......hmmmm
I really do like the fact that you can see the back and feel it. Especially the moto bump
nonotechnology said:
wow thank you so much for this! I've been trying to find a good bumper case since I have a motomaker-made X, and this post has a ton of great info! A few requests:
Do you plan on removing the covers for the buttons? I would really like my purple ones to shine through, but I'm not sure how it'd work with a case like this...
Click to expand...
Click to collapse
Having used the phone for a day and a half now with the case, I don't see myself removing the buttons. They have a great feel in my opinion, and I actually really like that they're slightly raised. I haven't had the issue that chrisomnia1 mentioned of accidentally turning the screen on when putting it in my pocket. If they were removed, I don't know how well this case would work given how flat the buttons are. That said, I had a TPU case for my Galaxy Nexus for which I cut out the volume buttons. They were recessed relative to the rest of the case, but I had no problems using them. It's basically a question of whether you want to spend $7 to find out.
once you've used the phone a bunch, do you think you could comment on how it feels with vs without the case? I really like the way this phone feels naked, but it's also very smooth and prone to slipping... does the case help with that?
Click to expand...
Click to collapse
I won't be using it much without the case, so I can't really comment on this in the long term. Although I'm cautious, I've dropped phones a few times and don't want to risk it naked. As for a quick opinion, as with all phones, it feels better without the case. I like that I can still feel the back of the phone though, as it feels much nicer than TPU cases. However, it is NOT a grippy case. I wouldn't say it's slippery, but I don't think it provides any increase in grip. If you're looking to increase the grippiness of the phone, this is not the case to do that.
thanks so much and welcome to the X-Zone! Enjoy your new phone!
Click to expand...
Click to collapse
You're welcome, and I definitely am enjoying it!
The bumper cases scare me to some degree.
1. With a white Moto X - the back gets dirty quickly. Looks like a put pine tar on my phone.
2. In the first few days I went naked, I picked up several chips/scrapes in the soft plastic on the back - this after having babied it waiting for my TPU case to arrive.
Gnex or S3 without a case (covering the back) - sure thing, replacement backs are a dime a dozen. Moto X without a case - not gonna do it, wouldn't be prudent.
just got my black/red one and i love it! really great because it shows off the black in the front and the white in the back (developers edition)
real zaebis !
I like the MotoX naked, but my hands are kinda big, and coming from a GNexus--this phone is pretty small. I was looking for a way to slightly increase the size, mainly the width. Does this bumper fulfill that need?
Yes. I like it. In not a fan of cases, but this gives a decent amount of protection without compromising the design.
There's a new case listed on the motomaker website, AirJacket Grip case (made by PowerSupport). Comes in a variety of moto maker colors. Anyone tried that yet? All accessories on sale @30% off through Motorola site as well
scottshu13 said:
There's a new case listed on the motomaker website, AirJacket Grip case (made by PowerSupport). Comes in a variety of moto maker colors. Anyone tried that yet? All accessories on sale @30% off through Motorola site as well
Click to expand...
Click to collapse
I ordered one. $30 shipped. A bit pricey, but I have been needing a case, and hoping this is the case I've been waiting for.
natezire71 said:
I like the MotoX naked, but my hands are kinda big, and coming from a GNexus--this phone is pretty small. I was looking for a way to slightly increase the size, mainly the width. Does this bumper fulfill that need?
Click to expand...
Click to collapse
It increases the width of the moto x by about like 0.25 in
scottshu13 said:
There's a new case listed on the motomaker website, AirJacket Grip case (made by PowerSupport). Comes in a variety of moto maker colors. Anyone tried that yet? All accessories on sale @30% off through Motorola site as well
Click to expand...
Click to collapse
Yes, I saw that and was interested in it at first glance, but, in the spirit of the topic at hand (bumper cases), it sadly isn't what I would consider to be a true bumper due to the clear back. But it's great it exists and that we have the equivalent of a Ringke Hybrid Fusion case for the X!
It's sad but it looks like the Moto G is going to be getting real bumper treatment (Motorola Grip Shells). I really hope they make some for the X too:
http://www.motorola.com/us/consumer...ls-for-Moto-G/Motorola-Shells-for-Moto-G.html
Pulled the trigger on this case... I like the Moto X naked but just want the screen raise so I can set it screen down with out scratching... ya I already have one in the dead center of the screen that I hope I can buff out. I HATE screen protectors.
webby_s said:
Pulled the trigger on this case... I like the Moto X naked but just want the screen raise so I can set it screen down with out scratching... ya I already have one in the dead center of the screen that I hope I can buff out. I HATE screen protectors.
Click to expand...
Click to collapse
I think you should try some glass ones, they provide protection and you can barely tell that they're actually there.
Sent from my SM-N9005 using Tapatalk
Just ordered a soft bumper tpu from eBay for $5. Comes with a screen protector. I'll post when I get it in 3-4 weeks lol
Sent from my XT1058 using xda app-developers app
I ordered the bumper from the op and I love it. I did cut off the tab on the back. Not sure what purpose it served but its gone now and looks better

Review of UAG cases for HTC One (M8) cases w/lots of pics!!!

This is a Review of HTC One (M8) cases from UAG. http://www.urbanarmorgear.com/collections/all#htc-one-m8
Actually, I have to apologize in advance. As part of my review work I'm doing in this forum, please check out a link in my signature, I receive a lot of accessories from different manufacturers. Since I just recently got Galaxy S5 for my wife, I receive a package with a number of UAG cases and they also included a nice selection for HTC One (M8). I don't have the actual phone, but figured take enough pictures for you to get an impression of this case. I have reviewed UAG cases for iPhone, S3, Note 2, S4, Note 3, and S5, and this has been my go-to case with every phone I get. So, I have not a single doubt in my mind the fitment of HTC One (M8) will be as impeccable as with any other previous UAG case I reviewed. Below is my review of the case impression which is a similar to S5 case review I just posted early today (applicable to M8 as well).
UAG definitely got this distinct industrial design look, which unfortunately has been copied lately by some low quality look-a-likes. With a lot of companies once they got a winning design, they just continue making the same cases scaled for the next phone, year after year. With UAG, they are constantly tweaking the design with new details to improve the grip, to have it thinner and more flexible while still retaining max protection, and even to improve the packaging. So starting with packaging, they finally got some refreshing colors to make their box more appealing. Of course, you still get a detailed description of the features on the front and on the back, including an official stamp of approval meeting MIL STD 810G-516.6 Military Drop-Test. It's about time to add this stamp of approval considering it has been already drop approved by thousands of it's users over the years, myself including. As a bonus, UAG also provided HD screen protector which I found to be a very nice gesture.
The case is very lightweight despite its composite design where hard outer PC shell is fused with a softer TPU-like inner soft impact resistant shell with a signature honeycomb pattern. The idea of such fused design makes the case thinner while still retaining a decent drop protection, and also adding a convenience of quick one-piece case removal without dealing with two separate shells. You also still have an enhanced corner protection which blends in nicely with the rest of the outline. One new additional element was added to the sides of the case in a form of a lower/upper grip pads on each side which haven't been present in the previous design. This enhances the grip and also makes sides look symmetrical. I found this design improvement to be very effective. Along with a sculptured industrial lines of the back design with decorative hex screws, UAG M8 case definitely has a much better grip. Although case feels slim, you still get the same rubber lip around the screen to lift the display with phone placed down or to provide a protection when dropped. Along with corner protection, you still get rear skid pads that allow phone to be placed on the back without any wobbling and keeping it from sliding on a smooth surface. And of course you get all the generous port openings to accommodate usb cables, over sized headphone connectors, camera, flash, mic, etc. Volume buttons (speaking from experience of all of their cases) have a very nice tactile feedback and can be easily located just by sliding your fingers along the side of the case. I also like how they put an inner trim around camera/flash opening to enable a glare-free flash.
Overall, I know it's hard to choose a case with every new phone because market is saturated with new additions almost every week. And most likely nobody gets just one case because we change it for different occasions or extended batteries, etc. But when you are making this deselection don't be fooled just by something that looks "cool", because at the end of the day the purpose of the case is to protect your phone. Well, that and also making it look cool at the same time But protection should be #1 priority, and if the case is made out of brittle plastic that will crack if dropped or cheap TPU material that will stretch and pull, or fused layers that will come undone - you might as well carry your phone naked. Otherwise, look for reputable companies that has been around for awhile, those which have a lot of feedback on Amazon, and those who don't just sell a case but actually offer a support to back it up. UAG is definitely of those companies, and I highly recommend and use their cases all the time.
Here are the pictures.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Anyone have any pics of the Clear UAG on an M8?
Sent from my HTC6525LVW using Tapatalk
that empty case does look good i must say
ok .. now get the phone in there get some meaning full shots
jags_the1 said:
that empty case does look good i must say
ok .. now get the phone in there get some meaning full shots
Click to expand...
Click to collapse
You can see how the same cases look on white S5 in a review of UAG S5 cases I posted earlier today: http://forum.xda-developers.com/showthread.php?t=2722799
Jmack3d said:
Anyone have any pics of the Clear UAG on an M8?
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
I got the clear one today and I'll have pictures up shortly. Need to charge the point-and-click.
Sisyphus306 said:
I got the clear one today and I'll have pictures up shortly. Need to charge the point-and-click.
Click to expand...
Click to collapse
Awesome, I bought the Clear one today and it should be here tomorrow so I'd love to see how its gonna look
Pictures attached. It's a really nice case, albeit a little difficult to remove (not as bad as Poetic Atmosphere for M7, though).
Sisyphus306 said:
Pictures attached. It's a really nice case, albeit a little difficult to remove (not as bad as Poetic Atmosphere for M7, though).
Click to expand...
Click to collapse
Thanks for the pics, I wish that last pic would of had the phone in it. The pics with the case on the phone were a bit dark but still gives me a good idea of the appearance
First of all: There already is a thread here: http://forum.xda-developers.com/showthread.php?t=2714087&page=5
Secondly: The case is, compared to the one for the S5, worse in quality.
Just compare the volume rockers! The S5 has bigger and better built ones! All of the pictures are from @vectron!
M8
S5
Also, the solution to get the light from the IR diode from the M8 "through" the case is really cheap! They just cut a hole.
As a result, the button itself feels weird, and the one I had collapsed easily.
And now the worst part: How the phone is held in place inside the case.
They use thin rubber pillars to hold it for the M8, whereas they mold the softer plastic nicely into shape.
M8
S5
I really don't know why.
Thank you @vectron for the images from this, and the S5s thread.
Cheers!
This case looks pretty good, despite some of its obvious flaws.
However, I had to buy an Otterbox.
I don't even like the otterbox for the m8, I think it looks plain and boring, and it just covers up the beauty of the m8. But I work in a dirty/dusty place, and I NEED the rubber port covers to keep the crud out of my headphone and charger ports. On my old phone, I had to use a toothpick to dig out the bull**** that collected inside my ports. For some reason, otterbox is the only company that seems to be using port covers.
If the UAG had rubber port covers, which I don't understand why it doesn't. I probably would have bought the UAG instead.
Hey everyone. I also received the UAG case for review on my channel and website. I did notice the volume rockers were made of a different material than on the Galaxy S4 model from last year, but I think it's due to how the buttons are on the M8. The material and everything is still very solid and high quality though.
If you have any questions about the case feel free to let me know! :good:
I have the all black. It looks great but I hate how slippery it is in my hands. I miss my Otterbox where just enough soft rubber stuck out from the inner sleeve that it really stuck in my hand.
Just got my clear UAG case! Hands down best case I've owned. The gunmetal color of the m8 shows through the back of the case and looks amazing.
Sent from my HTC6525LVW using Tapatalk
Got the clear one yesterday here are some pics.
That clear UAG one would have looked great if they had repositioned their logo. The OCD in me would not be able to take how the vertical logo covers the horizontal HTC logo.
Sent from my VK810 4G using XDA Premium 4 mobile app
I got this case today on my mail (Rust Color). Brought it on Amazon last Monday.
I must Say the Case feel great on the phone. One of people biggest concerns with the first batch of cases was that the camera ring wasn't a perfect fit. I can happily say this have been fixed. My brother have a UAG on his S3, My wife have one on her S4 and I can say that this one feels as sturdy as the S3 and S4 version.
Now, some pictures for your pleasure:
Hmm, can't see the pics
Sent from my HTC6525LVW using XDA Premium 4 mobile app
hxdrummerxc said:
This case looks pretty good, despite some of its obvious flaws.
However, I had to buy an Otterbox.
I don't even like the otterbox for the m8, I think it looks plain and boring, and it just covers up the beauty of the m8. But I work in a dirty/dusty place, and I NEED the rubber port covers to keep the crud out of my headphone and charger ports. On my old phone, I had to use a toothpick to dig out the bull**** that collected inside my ports. For some reason, otterbox is the only company that seems to be using port covers.
If the UAG had rubber port covers, which I don't understand why it doesn't. I probably would have bought the UAG instead.
Click to expand...
Click to collapse
The trident aegis series also has all ports covered, and for phones that have speakers or openings on the back they put a screen/mesh filter over those as well. I had one for an S2 back in the day, and I loved the case. Only reason I don't have them for my current phone is that I got hooked on kickstand cases, and they don't have those in anything but their defender equivalent case.
I'm debating between the clear uag or rust case and I'm wondering does the flash glare with either of those colors? If someone could test that out, I would definitely appreciate it.
Sent from my HTC One_M8 using XDA Premium 4 mobile app
onthezone said:
I'm debating between the clear uag or rust case and I'm wondering does the flash glare with either of those colors? If someone could test that out, I would definitely appreciate it.
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I havent tried Night pictures with the case on but I'll let you know later . I could upload some sample pictures too
EDIT: This was taken in a Pitch black room with the Case. Soo.. No glare

Review of UAG cases for Galaxy S6 w/lots of pics!!!

This is a Review of Urban Armor Gear (UAG) cases for Samsung Galaxy S6. http://www.urbanarmorgear.com/products/galaxy-s6-case-white (available on Amazon: http://www.amazon.com/URBAN-ARMOR-GEAR-Samsung-Galaxy/dp/B00SXFEA9Q/)
For what it worth, I've tested and shared with you A TON of reviews of different smartphone cases, and always try to be unbiased in my write ups. But the truth of the matter, at the end of the day I'm still coming back to and use most of the time UAG cases on all of our phones at home. Of course it's a matter of a personal preference, but for me UAG cases represent a perfect blend of protection without adding a bulk and a practical style without being too flashy. Smartphones don't come cheap these days, either if you are paying full price or even on a contract. Therefore, I consider a good case to be a wise investment to protect your phone from accidental drops and scratches, despite how tough you think they build or the promises of next gen Gorilla glass you hear about.
So what makes UAG cases so special? Besides meeting Military Standards drop test, I like the idea of composite design where they fuse a hard PC outer shell with a soft impact resistant honeycomb pattern inner shell forming a single piece case. There are a number of 2-piece cases with inner soft sleeve and outer hard shell to hold it together, but sometime I don't feel like dealing with 2 separate pieces of assembly where UAG lightweight design takes care of that. Especially for those who like to “accessorize” with different color cases, it’s always a plus to be able to quickly remove the case without fiddling around.
As I previously mentioned, the outside of the case is made out of a hard PC material, but it feels very comfortable and secure in your hand due to a soft textured rubber grip areas located symmetrically on the sides of the case. Furthermore, the top and the bottom of the phone is covered in rubber bumpers with reinforced corners and a rubber bumper going around the front edge of the display to allow you placing S6 face down without touching the screen. This bumper also has enough depth to accommodate any film screen protector or a typical tempered glass one. And speaking for screen protector, UAG included one as part of the accessories, along with a cleaning cloth. It's a nice bonus to have, to protect your screen from scratches, or if you are researching to get tempered glass protector.
Though protection is important, case also needs to keep your phone fully functional. Starting with power and volume up/down buttons, those are covered for protection, easy to push thanks to a clever side cutout, and have a nice hardware-like design/texture to easy locate them just by sliding your finger. Though buttons are easy to push, you still get a nice tactile response. At the top, you get very generous cutouts for all the ports. At the bottom, micro usb opening is also VERY generous to accommodate even extra large plugs, headphone opening accommodates even oversized plugs, and speaker opening is wide open. On the back, camera/flash cluster has one common opening with a black inner rubber trim to deflect flash reflection and to provide an easy access to a sensor next to the flash. Furthermore, you have 4 scratch resistant skid pads in the corners on the back to keep phone leveled and to prevent sliding when placed on the back, even on a slippery glass surface. The case comes in different colors with a unique color shade and a tough scratch resistant finish.
Overall, UAG always been my highly recommended case and still is for S6. I can’t count how many times I dropped my Note 2 and even Note 4 with UAG case, even on a concrete floor. Just keep in mind, tempered glass is a must have for your display protection, film screen protector only keeps scratches away. Also, for those who point out other similar looking single piece cases that imitate UAG industrial design style - keep in mind that you can imitate the look, but you can't imitate the build and the material quality. That will become very apparent when those look-a-like cases start color fading or end up with scratches or separated layers after the drop. As a mentioned above, I have been using my UAG cases for years and they still look like new.
Here are the pictures.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Have always loved that Black & White UAG case.
I am on the same boat, I used to buy at least 10 plus case every time I would get a new phone until I was introduced to the UAG cases.
This is all I buy now, it saves me so much money
I currently own a s6 edge and the UAG ash.
Thank you op! I bought a cappy joto case to keep it kind of safe until i found the perfect case for me and I think this is the one.
I have the black UAG case on my S6 and I love it. Low profile but still solid protection for the phone. Had one on my M8 as well.
Only wish it had port covers like the Commuter.
felloffthetruck said:
Only wish it had port covers like the Commuter.
Click to expand...
Click to collapse
There are always pros/cons to these port covers Good for headphone jack if you don't use it as often or use wireless most of the time, keeps dust away. But with micro-usb port - I use my phones in the car as Nav all the time plugged into charger, and having port cover is a major PITA, especially when it puts a pressure on the cable which bends the connector. Wireless Qi charging is the fastest without any case to keep the distance as short as possible (with case, it slows it down).
But that is a beauty of having all these different cases - choose whatever suits your needs!
Btw, I will be getting a few other UAG colors for review to share more pictures with you guys/gals, and also will be getting S6 Edge cases soon as well for more reviews.
I LOVE the look of my UAG case. My little problem with my Ash colored case is that its starting to collect a lot of noticeable scratches on the backside, but I guess that's a standard problem with transparent cases...
I tried three cases and settled on the UAG. I don't use the screen protector. This is a really good case but I wish that the case had a bit more of a non-slip quality. Otterbox is so much more bulky but it never slid off any surface.
Is there any drop test available? Their product looks good but the performances.. eurk
R寶雄 said:
Is there any drop test available? Their product looks good but the performances.. eurk
Click to expand...
Click to collapse
If you want to promote a case of a company YOU WORK for (do you think we are stupid and can't see that you created an account on XDA with every post promoting rhino cases?!?), then create a separate post with a review and let other users chime in with their feedback. But if you gonna troll around our community with BS posts such as the one above - your account will be deleted. Take it as a first warning.
I got a number of requests asking me to show other available UAG case colors and how it looks with my S6 white display model. So here it is, every UAG Galaxy S6 case color!!! I know, it's hard to pick a favorite one. Even so I typically go with a white Navigator, I really like their new transparent Maverick and transparent/gray Ash colors. They create a cool 3D transparent effect like no other cases I have seen. Also, in comparison to a more stiff and plasticky Maverick I reviewed with Note 4, this new updated version for S6 (both Maverick and Ash) is a little more flexible and easier to put on and take off the phone.
Overview of all colors - http://www.urbanarmorgear.com/collections/all#samsung-galaxy-s6
Navigator (white) - http://www.urbanarmorgear.com/products/galaxy-s6-case-white
Outland (rusty/orange) - http://www.urbanarmorgear.com/products/galaxy-s6-case-orange
Scout (black) - http://www.urbanarmorgear.com/products/galaxy-s6-case-black
Aero (blue) - http://www.urbanarmorgear.com/products/galaxy-s6-case-blue
Maverick (clear, ice) - http://www.urbanarmorgear.com/products/maverick-galaxy-s6-case
Ash (transparent gray) - http://www.urbanarmorgear.com/products/galaxy-s6-case-ash
Nice, if you ever need to part with any of the extras, I sure could use that black one.
Hey Vectron!
I wish I did! but just like you I just like to push a brand I like to make sure they get enough support and come up with more colors and products for my devices I believe start ups with REAL innovation should be pushed harder!
Sorry for criticizing a brand you like~ I'll try to be more considerate next time!
I'm with you on this opinion, great case no downsides.
Uag is awesome I don't think anyone would down play there protection. Unless they were pushing a bumper that no one buys. It's okay if you push your product don't question a proven one. Uag has provided there real reviews
Sent from my SAMSUNG-SM-G920A using XDA Free mobile app
R寶雄 said:
Hey Vectron!
I wish I did! but just like you I just like to push a brand I like to make sure they get enough support and come up with more colors and products for my devices I believe start ups with REAL innovation should be pushed harder!
Sorry for criticizing a brand you like~ I'll try to be more considerate next time!
Click to expand...
Click to collapse
Maybe you also wish your real name would be "Bao Xiong" according to chinese translation of your Rhino-寶雄 screen name?
Sorry, we don't play games here. If you question my review motives, please visit my Review Page on XDA: http://forum.xda-developers.com/showthread.php?t=2192333 - with HUNDREDS of reviews covering multiple DOZENS of different brands. I reviewed quite a number of cases for a lot of the phones. I have thousands of Posts on XDA and received thousands of Thanks for my work. My favoring of UAG is based on my personal preference and comparison to most of the other popular and well known cases. I don't get paid by UAG to review their products, but I do get their review samples, just like I get review sample of every other case I write about. On the other hand, YOU do WORK for Rhino Marketing and get paid to promote their bumpers. That is a big difference
Jr6278 said:
Uag is awesome I don't think anyone would down play there protection. Unless they were pushing a bumper that no one buys. It's okay if you push your product don't question a proven one. Uag has provided there real reviews
Sent from my SAMSUNG-SM-G920A using XDA Free mobile app
Click to expand...
Click to collapse
... is there something wrong with the Rhino Bumper? I just bought one today based off of other reviews I read online (well, mainly because of the $15 price difference between it and the UAG), but I still have a couple of days to cancel the order.
Thanks!
KWoods41 said:
... is there something wrong with the Rhino Bumper? I just bought one today based off of other reviews I read online (well, mainly because of the $15 price difference between it and the UAG), but I still have a couple of days to cancel the order.
Thanks!
Click to expand...
Click to collapse
There is absolutely NOTHING wrong with Rhino bumper For all I know, it could be a cool bumper case. I remember bumpers were cool 3 years ago, just outdated now because phones got bigger and more fragile. We are just p!ssed about their marketing guy trying to troll other review threads with his trash posts. As a matter of fact, I would encourage you once you get yours, create a review thread, post pictures, tell others what you do like and don't like about it. Let that "rhino" guy comment in that thread.
I just don't understand why so many companies create account on xda, and make every single post about their product in a sneaky way reply in other threads. At least mix it up with other posts, to make it less suspicious lol!!! Why not write your own review about a product, and let people comment and post in there, and you can direct others to your post. But since they don't have [email protected] to do it themselves, you show them initiative with your review bud!
wireless charging with this case on ?
Does the wireless charger work with this case on the s6 ?

Categories

Resources