Hey guys
I have a problem with rom manger when I go to install a new rom it says error status 7 then someone on the Internet said that I should update it and I thought that right so I went and update the cwm but now it just says installation aborted or something like that
Please help
And sorry for the bad English
What do you want to flash? Which version of CWM Recovery do you have?
And also what is your configuration?
Memphis_ said:
What do you want to flash? Which version of CWM Recovery do you have?
And also what is your configuration?
Click to expand...
Click to collapse
I want to flash wanamlite and version is 5 but I don't know configuration mean
The configuration is what you currently have: ROM, kernel,...
Try to flash from your custom recovery after downloading the rom.
Memphis_ said:
The configuration is what you currently have: ROM, kernel,...
Try to flash from your custom recovery after downloading the rom.
Click to expand...
Click to collapse
I have the official Samsung rom jb 4.1.2
And no I can't flash it with custom recovery
Rawan 96 said:
And no I can't flash it with custom recovery
Click to expand...
Click to collapse
Why?
Did you try TWRP Recovery?
Related
Hey guys, i'm a noob here.
I just flashed my phone with cm 10.1 and i'm not getting any signal on my phone. Before this i was on 2.3.6. Anyone have any suggestions on whether i should just flash the official 4.1.2 (and if i should, do you have any download links to the latest one?) or if you have any solution to my phone signal problem.
Thanks a lot guys
First flash JB firmware http://forum.xda-developers.com/showthread.php?t=2118119
Than flash custom ROM : Good:
muxa1980 said:
First flash JB firmware http://forum.xda-developers.com/showthread.php?t=2118119
Than flash custom ROM : Good:
Click to expand...
Click to collapse
i tried downloading the latest firmware from sammobile.com but it only had the .tar.md5 file, no csc file, so im not sure if i could follow this process
Just flash it as PDA.
Sent from my GT-I8160
Rox said:
Just flash it as PDA.
Sent from my GT-I8160
Click to expand...
Click to collapse
is there anything i need to do before i flash it as PDA?
ginryu006 said:
is there anything i need to do before i flash it as PDA?
Click to expand...
Click to collapse
wipe data/cache dalvik before and after flash
Rox said:
wipe data/cache dalvik before and after flash
Click to expand...
Click to collapse
i see, thanks. so if i flash that rom, will i lose my root access?
ginryu006 said:
i see, thanks. so if i flash that rom, will i lose my root access?
Click to expand...
Click to collapse
yes, but it is easy to have it again
there is thread out here , just flash root.zip , searfch for : "how to root jellybean" by shaan, i am to lazy xD
Rox said:
yes, but it is easy to have it again
there is thread out here , just flash root.zip , searfch for : "how to root jellybean" by shaan, i am to lazy xD
Click to expand...
Click to collapse
thanks a lot oh, and one last thing, any suggestions on which firmware is best? the one i have is XENMF1
ginryu006 said:
thanks a lot oh, and one last thing, any suggestions on which firmware is best? the one i have is XENMF1
Click to expand...
Click to collapse
Take any XXMG2 from here: http://forum.xda-developers.com/showthread.php?t=2340849
ginryu006 said:
Hey guys, i'm a noob here.
I just flashed my phone with cm 10.1 and i'm not getting any signal on my phone. Before this i was on 2.3.6. Anyone have any suggestions on whether i should just flash the official 4.1.2 (and if i should, do you have any download links to the latest one?) or if you have any solution to my phone signal problem.
Thanks a lot guys
Click to expand...
Click to collapse
back to GB Stock ROM, and you can use jelly bean 4.1.2 Frimware for your region country, flash with odin, put PDA and CSC, if your flash done, go to recovery mode, and clear data and cache , and now you can reboot , finish, your trouble is done
Rox said:
Just flash it as PDA.
Sent from my GT-I8160
Click to expand...
Click to collapse
help! i did what you said and now my phone's stuck on the boot screen. i can't even access download or recovery mode
Hi,friends,
My device is F240s10g, andriod version 4.1.2, I have already got the root acess and I'm trying to install custom recovery from this thread:http://forum.xda-developers.com/showthread.php?t=2361941
but there is some problem.
[-]Loki aboot version does not match device
Click to expand...
Click to collapse
I have tried f240s,f240k, both cwm and twrp but the result is same. So I'm asking for help here.
@hkfriends
Thanks.
Hi guys i have a problem when I instaling the eXistenZ v2 on LT26. I rooted my phone i have recovery and when i install a rom have error nr 7 in revovery, any ideas?
Flash the kernel file from the rom itself
Try flashing the kernel from the rom itself bro this works most of the time Extract it first from the zip file of the ROM you want to install then install the kernel usually it is the boot.img file Flash it via fastboot mode using flashtool then voila you have the kernel of the ROM you want to use and most of the time the recovery comes with it too :good:
ksmalcuga said:
Hi guys i have a problem when I instaling the eXistenZ v2 on LT26. I rooted my phone i have recovery and when i install a rom have error nr 7 in recovery, any ideas?
Click to expand...
Click to collapse
Are You on stock firmware? Existenz requires You to be on stock 6.2.b.1.96 firmware. Also, You have to flash v1 and then flash v2, not the v2 directly.
11:55 said:
Try flashing the kernel from the ROM itself bro
Click to expand...
Click to collapse
Do check, this ROM is stock based, so it doesn't have a separate kernel.
I flashed witth stock 6.2.b.1.96, and try to flash V1 witch recovery v6.0.3.0 but still error ''Error in /sdcard/xperia_s_existenz_v1.zip (status 7)'' Maybe try with other kernel?
ksmalcuga said:
I flashed witth stock 6.2.b.1.96, and try to flash V1 witch recovery v6.0.3.0 but still error ''Error in /sdcard/xperia_s_existenz_v1.zip (status 7)'' Maybe try with other kernel?
Click to expand...
Click to collapse
Huh, weird. Just to verify, could You try downloading the v1 again? Or else, do You have a unlocked bootloader? If yes, then You can flash the DoomKernel.
Yes, i downloaded rom again, and i have lock bootloader witch no posibly to unlock 'allowed-no'' something like this, but this rom can be flash without unlocked bootloader.
ksmalcuga said:
Yes, i downloaded rom again, and i have lock bootloader witch no posibly to unlock 'allowed-no'' something like this, but this rom can be flash without unlocked bootloader.
Click to expand...
Click to collapse
Well, since You have a locked bootloader, You can't flash other kernels. Try this recovery, If even this one doesn't work, then try going back to full stock(no root, no recovery) and root using DoomLord's method and try above recovery again as it had worked for Me earlier.
ksmalcuga said:
Hi guys i have a problem when I instaling the eXistenZ v2 on LT26. I rooted my phone i have recovery and when i install a rom have error nr 7 in revovery, any ideas?
Click to expand...
Click to collapse
This is waaaay late but, may help someone.
As I understand it, this is an issue with the kernel/recovery you have. You need to flash a boot.img with a combined kernel/recovery that is compatible with the rom you wish to flash. You use fastboot for that:
Code:
fastboot flash boot boot.img
fastboot reboot
So, for official CM11, grab boot.img from the rom zip file and you should get (a rather old but fine for CM11) CWM recovery.
For many other Acro S (hikari) roms you find - e.g. @deedwar's BeanStalk - you will get TWRP recovery if you flash the included boot.img file.
Once you've got the kernel/recovery flashed, then you flash the full rom after the reboot.
MiyagiSan said:
This is waaaay late but, may help someone.
As I understand it, this is an issue with the kernel/recovery you have. You need to flash a boot.img with a combined kernel/recovery that is compatible with the rom you wish to flash. You use fastboot for that:
Code:
fastboot flash boot boot.img
fastboot reboot
So, for official CM11, grab boot.img from the rom zip file and you should get (a rather old but fine for CM11) CWM recovery.
For many other Acro S (hikari) roms you find - e.g. @deedwar's BeanStalk - you will get TWRP recovery if you flash the included boot.img file.
Once you've got the kernel/recovery flashed, then you flash the full rom after the reboot.
Click to expand...
Click to collapse
I think You didn't notice, but He said He has locked bootloader. So He cannot follow the procedure You mentioned.
Mirhawk said:
I think You didn't notice, but He said He has locked bootloader. So He cannot follow the procedure You mentioned.
Click to expand...
Click to collapse
Yes, this is for unlocked bootloader only.
Just noticed OP mentions a locked bootloader in a later post.
Hi all.
after doing root, i stuck without rom.
i look at the guide here but cablnt fond link to download the rom to my tm310.
where can i download rom?
thanks
tom
tomiko123 said:
Hi all.
after doing root, i stuck without rom.
i look at the guide here but cablnt fond link to download the rom to my tm310.
where can i download rom?
thanks
tom
Click to expand...
Click to collapse
Ok now after find some rom..
i got this error message:
error flash zip...
someone?
thanks
tomiko123 said:
Ok now after find some rom..
i got this error message:
error flash zip...
someone?
thanks
Click to expand...
Click to collapse
Flash the newest Version of your Recovery, and than try again to flash the Rom.
bierma32 said:
Flash the newest Version of your Recovery, and than try again to flash the Rom.
Click to expand...
Click to collapse
What does it mean flash the newest version of my recovery?
tomiko123 said:
What does it mean flash the newest version of my recovery?
Click to expand...
Click to collapse
Please post the full error and wich Rom are you want to flash.
Hey guys i need some help. I took out my old Galaxy Grand Duos and thought about rooting it to get Android Kitkat ( I have an International version which has never been rooted before ). I rooted it successfully however I am facing problem with the CWM recovery. When i first installed it I was getting the 'No Command" error. I read on XDA that I need to perform a battery pull in order to get the CWM working. I did that and it worked but it only works when I use odin to flash it. Otherwise when ever I enter recovery I get the 'No Command' error. What should I do?
Secondly im trying to install this rom http://forum.xda-developers.com/showthread.php?t=2563557 . When i get the CWM working (by flashing it with Odin) there seems to be an error which prevents me from flashing this rom. The message I get is *Cant install this package on top of incapable data. Please try another package or run a factory reset. Error in (the file location and name) (Status 7) Installation aborted*
Thanks in advance
Can u tell us how did u root ur phone?
Trilochanaaya said:
Can u tell us how did u root ur phone?
Click to expand...
Click to collapse
Thanks for the reply and sure. Here is the link
http://www.youtube.com/watch?v=jm1ssFkEaN0
metalmouth22 said:
Thanks for the reply and sure. Here is the link
http://www.youtube.com/watch?v=jm1ssFkEaN0
Click to expand...
Click to collapse
You need to have latest recovery to flash.
Any latest recovery has SE Linux support. Choose latest version or build of your choice from below threads and flash it using your recovery..
http://forum.xda-developers.com/galaxy-grand-duos/development/recovery-twrp-t2839237
http://forum.xda-developers.com/showthread.php?t=2437182
http://forum.xda-developers.com/showthread.php?t=2725019
Trilochanaaya said:
You need to have latest recovery to flash.
Any latest recovery has SE Linux support. Choose latest version or build of your choice from below threads and flash it using your recovery..
http://forum.xda-developers.com/show....php?t=2437182
http://forum.xda-developers.com/gala...-twrp-t2839237
http://forum.xda-developers.com/show....php?t=2725019
Click to expand...
Click to collapse
Thanks, ill try this right now. Btw before making this thread i tried to download CWM's latest version from its website but it was not downloading properly. I guess the download file was incomplete.
Trilochanaaya said:
You need to have latest recovery to flash.
Any latest recovery has SE Linux support. Choose latest version or build of your choice from below threads and flash it using your recovery..
http://forum.xda-developers.com/show....php?t=2437182
http://forum.xda-developers.com/gala...-twrp-t2839237
http://forum.xda-developers.com/show....php?t=2725019
Click to expand...
Click to collapse
These links are not working =/
metalmouth22 said:
These links are not working =/
Click to expand...
Click to collapse
Check now. Links fixed!