Hello,
I recently updated my tmobile s3 to newest OTA update.
I want to install custom rom and i was successfully able to root my phone and did double check with root checker application and it was rooted fine.
I was trying to install zip file after all this and it gave me status 7 error.
I tried more than one custom roms and its all giving me same error.
Help will be appriciated
thanks
What rom, and what recovery and what version are you on? Also, how did you update to latest?
T-Mobile SGS III
mt3g said:
What rom, and what recovery and what version are you on? Also, how did you update to latest?
T-Mobile SGS III
Click to expand...
Click to collapse
Hi
I am on 4.1.2 right now.
I was not able to update through OTA so i used stock 4.1.2 and flashed through odin
I flashed cwm-touch-6.0.3.1-d2tmo through odin .. and rooted.
EDIT :
Tried with diff CWM same error
I am not able to post link here i have taken snap of my phone
re: error 7
btd0890 said:
Hello,
I recently updated my tmobile s3 to newest OTA update.
I want to install custom rom and i was successfully able to root my phone and did double check with root checker application and it was rooted fine.
I was trying to install zip file after all this and it gave me status 7 error.
I tried more than one custom roms and its all giving me same error.
Help will be appriciated
thanks
Click to expand...
Click to collapse
Here is a sure way to fix your problem, there might be other ways too but they would all be more or less trial and error.
Follow the instructions below.
Here is the step by step guide:
After you have followed these instructions your phone will have the new T999 4.1.2 jellybean pre-rooted firmware
and you will have a clean fresh start with a phone that works properly to start with.
Download the stock-rooted Odin flash T999_UVDMD5 Samsung Galaxy S3 Jellybean v4.1.2 firmware.
After downloading make a folder on your computer's desktop and unzip the
file using Winzip or 7zip so the .TAR file is in the new folder you just made.
Download and extract Odin into the same folder you made containing the TAR file
Here is the link for Odin: http://d-h.st/Q14
Download ODIN which is required for flashing the stock rooted firmware (a windows app)
Download the Odin Flash firmware for T999 Tmobile then copy it to the same folder as Odin
Run Odin by double clicking the Odin.exe within the same folder as the TAR file you extracted
Turn off your phone and boot into DOWNLOAD MODE (Volume Down + Home + Power Hold until phone powers up, then release and press Volume Up to enter Download Mode)
Once in Download Mode, connect the USB/Charger cable to the phone and plug into the USB port on your computer.
You should now see a COM** port listed toward the top-left of Odin (under ID:COM)
Click on the PDA button in the middle-right area of Odin.
Browse to and select the Firmware you downloaded (TAR file)
Make sure Auto-Reboot and F. Reset Time are the only options checked and that PDA is the only other thing checked.
TRIPLE CHECK your settings and that you have selected the correct firmware for your model phone and are using the correct options.
If you are using a laptop, make absolutely sure you are plugged in, or if on battery, that it is charged enough and will not go into sleep mode during flash.
Click Start to begin the flash. This will take a while, so be patient!
Once complete, in the top-left box in Odin, it will say PASS and the phone should have automatically rebooted.
You may unplug the phone and close Odin if you wish.
Wait at least 5-10 minutes for the system to boot the first time and then build its cache!
(It may seem to hang during boot, this is normal and you must be patient!!!)
Good Luck!
I want to know if it is gonna work for me too. I am on CM 10.1 RC2, i tried to update to the latest nightliest and i always got this error: assert failed getprop("ro.bootloader") ...
Is there another way to fix this i don't want to go back to zero and start all over again
Many thanks
re: errors
alexleplombier said:
I want to know if it is gonna work for me too. I am on CM 10.1 RC2, i tried to update to the latest nightliest and i always got this error: assert failed getprop("ro.bootloader") ...
Is there another way to fix this i don't want to go back to zero and start all over again
Many thanks
Click to expand...
Click to collapse
This will work for you too, after you are done you will have a stock rooted T999 Jellybean 4.1.2 rom.
If you like the CM 10.1 rom which you have in the phone now you might want to make a nandroid
backup of it before doing anything else.
The process I described in my previous post will not delete any of your pictures, videos or music you
might have on your internal or external sdcard. I would suggest NOT flashing any CM10.1/AOSP/AOKP
or ported roms they are all experimental and are only worthwhile for developers or for those people who
like to do a lot of experimentation.
If you want a really excellent custom rom based on the T999 4.1.1 Jellybean firmware I would suggest that
you check out the Wicked v10 custom rom. It has a lot of features and options and themes not found in any
stock roms and it's about the best custom rom you will find here in XDA for your phone.
Here is a link to it if you want to check it out: http://forum.xda-developers.com/showthread.php?t=1804260
If you decide to flash any custom roms I would strongly suggest to first do the step by step in my previous post
before doing anything else.
Good luck!
btd0890 said:
Hello,
I recently updated my tmobile s3 to newest OTA update.
I want to install custom rom and i was successfully able to root my phone and did double check with root checker application and it was rooted fine.
I was trying to install zip file after all this and it gave me status 7 error.
I tried more than one custom roms and its all giving me same error.
Help will be appriciated
thanks
Click to expand...
Click to collapse
First of all, make sure that you redownload the ROM, check that the MD5's match, and that you are indeed on the latest CWM recovery.
Secondly, I've heard of these status 7 errors, even when on the latest CWM recovery. There's times when installing certain ROMs where these errors occur, which usually happens when the ROM’s updater script file checks to see if the phone model of your phone is compatible with the ROM you are installing and this portion of the script are called “asserts”. with this it prevents you from accidentally flashing a ROM intended for a different model.
Normally you can fix the issue by installing TWRP recovery but there's another possible solution for this if the TWRP method or the methods mentioned above doesn't solve it, which SHOULD, but take some serious precaution. You need to be very careful and do this at your own risk.
Follow this step by step guide
http://highonandroid.com/android-roms/how-to-fix-status-7-error-with-cwm-recovery-on-rooted-android/
Following this will remove the asserts thus removing protection upon flashing the wrong ROM. Do if you choose to follow this make absolutely sure that the ROM you're flashing is for the T999.
Also, keep in mind that not all ROMs will allow you to do this so it's always important to keep your options open.
Sent from my SGH-T999 using xda premium
I want to know what assert is failing.
Misterjunky said:
Here is a sure way to fix your problem, there might be other ways too but they would all be more or less trial and error.
Follow the instructions below.
Here is the step by step guide:
After you have followed these instructions your phone will have the new T999 4.1.2 jellybean pre-rooted firmware
and you will have a clean fresh start with a phone that works properly to start with.
Download the stock-rooted Odin flash Samsung Galaxy S3 Jellybean v4.1.2 firmware.
After downloading make a folder on your computer's desktop and unzip the
file using Winzip or 7zip so the .TAR file is in the new folder you just made.
Download and extract Odin into the same folder you made containing the TAR file
Here is the link for Odin:
Download ODIN which is required for flashing the stock rooted firmware (a windows app)
Download the Odin Flash firmware for T999 Tmobile then copy it to the same folder as Odin
Run Odin by double clicking the Odin.exe within the same folder as the TAR file you extracted
Turn off your phone and boot into DOWNLOAD MODE (Volume Down + Home + Power Hold until phone powers up, then release and press Volume Up to enter Download Mode)
Once in Download Mode, connect the USB/Charger cable to the phone and plug into the USB port on your computer.
You should now see a COM** port listed toward the top-left of Odin (under ID:COM)
Click on the PDA button in the middle-right area of Odin.
Browse to and select the Firmware you downloaded (TAR file)
Make sure Auto-Reboot and F. Reset Time are the only options checked and that PDA is the only other thing checked.
TRIPLE CHECK your settings and that you have selected the correct firmware for your model phone and are using the correct options.
If you are using a laptop, make absolutely sure you are plugged in, or if on battery, that it is charged enough and will not go into sleep mode during flash.
Click Start to begin the flash. This will take a while, so be patient!
Once complete, in the top-left box in Odin, it will say PASS and the phone should have automatically rebooted.
You may unplug the phone and close Odin if you wish.
Wait at least 5-10 minutes for the system to boot the first time and then build its cache!
(It may seem to hang during boot, this is normal and you must be patient!!!)
Good Luck!
Click to expand...
Click to collapse
Heyy
I followed your step and my phone is rooted now.
What is the next step now.I think i will have to install recovery first and than flash whichever rom i want to install??
Thanks
re: recovery
btd0890 said:
Heyy
I followed your step and my phone is rooted now.
What is the next step now.I think i will have to install recovery first and than flash whichever rom i want to install??
Thanks
Click to expand...
Click to collapse
Here is the link for TWRP Touch Recovery: http://forum.xda-developers.com/attachment.php?attachmentid=1404381&d=1350325570
Flash it using ODIN in PDA slot just like you flashed the rom.
It's the best recovery you can find.
Then you can flash any cwm/twrp roms you like easily.
Good luck!
This worked for me
I was able to install custom os
Thank you very much guys for help
Misterjunky said:
Here is a sure way to fix your problem, there might be other ways too but they would all be more or less trial and error.
Good Luck!
Click to expand...
Click to collapse
Cannot Flash Or Root T999 S3
Hello all,
I just installed 4.3 through OTA and was not happy with this long awaited update. I am a flash junky and have flashed many phones in the past. The problem I am having I cannot flash the root, it does accept it and reboot, however, when it boots up up it states super ushers in not working. I did manage to root once, but when I tried to install 10.2 cyan mod it failed. In addition I went back to Odin and tried to install the 4.1.2 stock rom and it read failed. My question is there a new root that needs to be installed to over rite the stock 4.3 rom. I did see a pop up come up that read this application has been blocked, I believe it is a new feature for the 4.3, which is Knox. I just want to put a custom rom, this new 4.3 official rom sucks..Thanks.
GAlex1699 said:
Hello all,
I just installed 4.3 through OTA and was not happy with this long awaited update. I am a flash junky and have flashed many phones in the past. The problem I am having I cannot flash the root, it does accept it and reboot, however, when it boots up up it states super ushers in not working. I did manage to root once, but when I tried to install 10.2 cyan mod it failed. In addition I went back to Odin and tried to install the 4.1.2 stock rom and it read failed. My question is there a new root that needs to be installed to over rite the stock 4.3 rom. I did see a pop up come up that read this application has been blocked, I believe it is a new feature for the 4.3, which is Knox. I just want to put a custom rom, this new 4.3 official rom sucks..Thanks.
Click to expand...
Click to collapse
Someone has to unlock the bootloader on 4.3. There are new algorithms that are preventing installations of custom roms. If I remember correctly, in order to root the phone on 4.3, download CF - Auto Root for SGH-T999 and flash it via Download Mode. Once it reboots, head to Google Play and update SuperSU. Open the app and hit yes when it tells you to update the su binary. The latest SuperSU works around the Knox security. The "application has been blocked" notification will still appear but will not affect SuperSU anymore. It's an annoying notification that can be disabled with another app called Terminal Emulator.
Type this onto the Terminal:
su
pm disable com.sec.knox.seandroid
There is already lots of info about knox and 4.3 in our forums. But if you're going to another rom, there's no reason to root first.
Flash cwm
Flash rom
Factory reset
Root or no Root
DocHoliday77 said:
There is already lots of info about knox and 4.3 in our forums. But if you're going to another rom, there's no reason to root first.
Flash cwm
Flash rom
Factory reset
Click to expand...
Click to collapse
Hello, thanks for the reply. So, if I want to flash a custom rom there is no need to root. I have also rooted before installing a custom rom. I am currently running 4.3 stock filmware, thanks.
---------- Post added at 11:29 PM ---------- Previous post was at 11:25 PM ----------
Vigz said:
Someone has to unlock the bootloader on 4.3. There are new algorithms that are preventing installations of custom roms. If I remember correctly, in order to root the phone on 4.3, download CF - Auto Root for SGH-T999 and flash it via Download Mode. Once it reboots, head to Google Play and update SuperSU. Open the app and hit yes when it tells you to update the su binary. The latest SuperSU works around the Knox security. The "application has been blocked" notification will still appear but will not affect SuperSU anymore. It's an annoying notification that can be disabled with another app called Terminal Emulator.
Type this onto the Terminal:
su
pm disable com.sec.knox.seandroid
Click to expand...
Click to collapse
Thanks for the reply and information. I believe you are correct because as I mention in my post I was able to have root access, and I believed I updated super but did not realize I did. Finally, if I gain my root acces will I be able to flash my T999 S 3 using TRWP or Clockmod? Thank you again.
GAlex1699 said:
Hello, thanks for the reply. So, if I want to flash a custom rom there is no need to root. I have also rooted before installing a custom rom. I am currently running 4.3 stock filmware, thanks.
---------- Post added at 11:29 PM ---------- Previous post was at 11:25 PM ----------
Thanks for the reply and information. I believe you are correct because as I mention in my post I was able to have root access, and I believed I updated super but did not realize I did. Finally, if I gain my root acces will I be able to flash my T999 S 3 using TRWP or Clockmod? Thank you again.
Click to expand...
Click to collapse
When I tried to flash CyanogenMod 10.2 on the official 4.3 update with ClockworkMod, it just resulted in a ton of errors. The recovery wasn't able to flash the rom at all. I tried other custom roms and the same thing happened. It showed a bunch of letters and numbers along with the word, "bootloader". I'll copy the recovery log when I get the chance, my phone is unfortunately bricked
Bricked S3
Vigz said:
When I tried to flash CyanogenMod 10.2 on the official 4.3 update with ClockworkMod, it just resulted in a ton of errors. The recovery wasn't able to flash the rom at all. I tried other custom roms and the same thing happened. It showed a bunch of letters and numbers along with the word, "bootloader". I'll copy the recovery log when I get the chance, my phone is unfortunately bricked
Click to expand...
Click to collapse
Did you create a back up? Also is a soft or hard brick. If it is soft brick you can use odin and download the official custom rom from here:
Samsung:good:. Just put the device into download mod.
GAlex1699 said:
Did you create a back up? Also is a soft or hard brick. If it is soft brick you can use odin and download the official custom rom from here:
Samsung:good:. Just put the device into download mod.
Click to expand...
Click to collapse
It's a hard brick. There is a guide here on XDA that should unbrick it. I'm just waiting for my microSD card to get here.
Same here
Vigz said:
When I tried to flash CyanogenMod 10.2 on the official 4.3 update with ClockworkMod, it just resulted in a ton of errors. The recovery wasn't able to flash the rom at all. I tried other custom roms and the same thing happened. It showed a bunch of letters and numbers along with the word, "bootloader". I'll copy the recovery log when I get the chance, my phone is unfortunately bricked
Click to expand...
Click to collapse
Im having the same problem when i try to flash carbon rom which is aosp and its gapps it gets a bunch of errors that say ro_bootloader like 5 times and did u flash it through oding first cause this was my process
from dandroid flash official 4.3 through odin
root now working on official because of knox so i flashed docholiday through TWRP
and now i cant flash AOSP:crying::crying:
Please help thanks
EDIT heres the recovery log
Starting TWRP 2.6.3.0 on Thu Jan 1 17:15:43 1970
BOARD_HAS_NO_REAL_SDCARD := true
I:Internal path defined: '/data/media'
I:External path defined: '/external_sd'
I:Mount: Unable to find partition for path '/data'
TW_NO_REBOOT_BOOTLOADER := true
RECOVERY_SDCARD_ON_DATA := true
TW_NO_USB_STORAGE := true
TW_HAS_DOWNLOAD_MODE := true
TW_INCLUDE_CRYPTO := true
I:TW_BRIGHTNESS_PATH := /sys/devices/platform/msm_fb.524801/leds/lcd-backlight/brightness
Starting the UI...Pixel format: 720x1280 @ 32bpp
Pixel format: RGBX_8888
framebuffer: fd 4 (720 x 1280)
=> Linking mtab
=> Processing recovery.fstab
Irocessing '/boot'
Irocessing '/system'
Irocessing '/data'
I:mount '/data/media' '/sdcard' process ended with RC=0
I:mount '/data/media/0' '/sdcard' process ended with RC=0
I:mount '/data/media/0' '/sdcard' process ended with RC=0
I:Backup folder set to '/data/media/0/TWRP/BACKUPS/b40cdee5'
I:Settings storage is '/data/media/0'
Irocessing '/cache'
Irocessing '/recovery'
Irocessing '/external_sd'
Irocessing '/usb-otg'
I:Created '/usb-otg' folder.
Updating partition details...
Iata backup size is 2309MB, size: 12335MB, used: 2661MB, free: 9543MB, in data/media: 352MB.
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
I:Unmounting main partitions...
Partition Logs:
/boot | /dev/block/mmcblk0p7 | Size: 10MB
Flags: Can_Be_Backed_Up IsPresent
Primary_Block_Device: /dev/block/mmcblk0p7
Display_Name: Boot
Storage_Name: boot
Backup_Path: /boot
Backup_Name: boot
Backup_Display_Name: Boot
Storage_Path: /boot
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/system | /dev/block/mmcblk0p14 | Size: 1476MB Used: 1213MB Free: 262MB Backup Size: 1213MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p14
Display_Name: System
Storage_Name: System
Backup_Path: /system
Backup_Name: system
Backup_Display_Name: System
Storage_Path: /system
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/data | /dev/block/mmcblk0p15 | Size: 12335MB Used: 2661MB Free: 9543MB Backup Size: 2309MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent Can_Be_Encrypted Has_Data_Media Can_Encrypt_Backup Use_Userdata_Encryption Is_Storage Is_Settings_Storage
Symlink_Path: /data/media/0
Symlink_Mount_Point: /sdcard
Primary_Block_Device: /dev/block/mmcblk0p15
Length: -16384
Display_Name: Data
Storage_Name: Internal Storage
Backup_Path: /data
Backup_Name: data
Backup_Display_Name: Data
Storage_Path: /data/media/0
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/cache | /dev/block/mmcblk0p17 | Size: 826MB Used: 14MB Free: 812MB Backup Size: 14MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p17
Display_Name: Cache
Storage_Name: Cache
Backup_Path: /cache
Backup_Name: cache
Backup_Display_Name: Cache
Storage_Path: /cache
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/recovery | /dev/block/mmcblk0p18 | Size: 10MB
Flags: Can_Be_Backed_Up IsPresent
Primary_Block_Device: /dev/block/mmcblk0p18
Display_Name: Recovery
Storage_Name: recovery
Backup_Path: /recovery
Backup_Name: recovery
Backup_Display_Name: Recovery
Storage_Path: /recovery
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/external_sd | /dev/block/mmcblk1p1 | Size: 30428MB Used: 21663MB Free: 8764MB Backup Size: 21663MB
Flags: Can_Be_Mounted Can_Be_Wiped Wipe_Available_in_GUI Removable IsPresent Is_Storage
Primary_Block_Device: /dev/block/mmcblk1p1
Alternate_Block_Device: /dev/block/mmcblk1
Display_Name: Micro SDcard
Storage_Name: Micro SDcard
Backup_Path: /external_sd
Backup_Name: external_sd
Backup_Display_Name: Micro SDcard
Storage_Path: /external_sd
Current_File_System: vfat
Fstab_File_System: vfat
Backup_Method: files
/usb-otg | | Size: 0MB Used: 0MB Free: 0MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Wipe_Available_in_GUI Removable Is_Storage
Primary_Block_Device: /dev/block/sda1
Alternate_Block_Device: /dev/block/sda
Display_Name: USB-OTG
Storage_Name: USB-OTG
Backup_Path: /usb-otg
Backup_Name: usb-otg
Backup_Display_Name: USB-OTG
Storage_Path: /usb-otg
Current_File_System: vfat
Fstab_File_System: vfat
Backup_Method: files
I:Loading package: TWRP (/script/ui.xml)
I:Loading package: TWRP (/data/media/0/TWRP/theme/ui.zip)
I:Loading package: TWRP (/res/ui.xml)
I:Loading resources...
I:Loading variables...
I:Loading pages...
I:Loading page main
I:Loading page main2
I:Loading page install
I:Loading page flash_confirm
I:Loading page flash_zip
I:Loading page flash_done
I:Loading page clear_vars
I:Loading page confirm_action
I:Loading page action_page
I:Loading page singleaction_page
I:Loading page action_complete
I:Loading page filecheck
I:Loading page rebootcheck
I:Loading page wipe
I:Loading page advancedwipe
I:Loading page formatdata
I:Loading page formatdata_confirm
I:Loading page backup
I:Loading page backupname1
I:Loading page backupname2
I:Loading page backupencryption
I:Loading page backupencryption2
I:Loading page checkbackuppassword
I:Loading page backup_run
I:Loading page restore
I:Unable to open '/data/media/0/TWRP/BACKUPS/b40cdee5'
I:Loading page restore_read
I:Loading page restore_decrypt
I:Loading page try_restore_decrypt
I:Loading page restore_select
I:Loading page renamebackup
I:Loading page restore_run
I:Loading page selectstorage
I:Loading page mount
I:Loading page usb_mount
I:Loading page usb_umount
I:Loading page reboot
I:Loading page settings
I:Loading page timezone
I:Loading page screen
I:Loading page advanced
I:Loading page partsdcard
I:Loading page htcdumlock
I:Loading page lock
I:Loading page filemanagerlist
I:Loading page filemanageroptions
I:Loading page choosedestinationfolder
I:Loading page filemanagerrenamefile
I:Loading page filemanagerrenamefolder
I:Loading page filemanagerchmod
I:Loading page filemanagerconfirm
I:Loading page filemanageracction
I:Loading page decrypt
I:Loading page trydecrypt
I:Loading page terminalfolder
I:Loading page terminalcommand
I:Loading page sideload
I:Loading page installsu
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Switching packages (TWRP)
E:Cannot load volume /misc!
E:Cannot load volume /misc!
Startup Commands: ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.sys.usb.config=mtp,adb
ro.build.id=IMM76L
ro.build.display.id=cm_d2tmo-eng 4.0.4 IMM76L eng.dees_troy.20130913.170711 test-keys
ro.build.version.incremental=eng.dees_troy.20130913.170711
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Fri Sep 13 17:07:23 UTC 2013
ro.build.date.utc=0
ro.build.type=eng
ro.build.user=dees_troy
ro.build.host=ded1.ktechnology.net
ro.build.tags=test-keys
ro.product.model=SGH-T999
ro.product.brand=samsung
ro.product.name=d2tmo
ro.product.device=d2tmo
ro.product.board=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8960
ro.build.product=d2tmo
ro.build.description=samsung/d2tmo/d2tmo:4.0.4/IMM76D/T999UVALEM:user/release-keys
ro.build.fingerprint=d2tmo-user 4.0.4 IMM76D T999UVALEM release-keys
ro.build.characteristics=default
ro.cm.device=d2tmo
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
dev.pm.dyn_samplingrate=1
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-fma2dp=false
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
lpa.decode=false
lpa.use-stagefright=false
ro.use_data_netmgrd=true
persist.data_netmgrd_nint=16
ro.emmc.sdcard.partition=17
persist.timed.enable=true
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.speaker.location=high
ro.opengles.version=131072
ro.ril.transmitpower=true
ro.telephony.call_ring.multiple=0
ro.sf.lcd_density=320
persist.gps.qmienabled=true
ro.telephony.ril_class=SamsungQualcommUiccRIL
telephony.lteOnGsmDevice=1
ro.telephony.ril.v3=qcomuiccstack
persist.radio.apm_sim_not_pwdn=1
persist.radio.add_power_save=1
persist.radio.snapshot_disabled=1
debug.enabletr=true
com.qc.hardware=true
ro.sf.compbypass.enable=1
com.qc.hdmi_out=true
ro.hdmi.enable=true
debug.sf.hw=1
debug.composition.type=dyn
ro.cwm.enable_key_repeat=true
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
ro.rommanager.developerid=cyanogenmod
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dataroaming=false
ro.cm.version=9.0.0-RC0-d2tmo-UNOFFICIAL
ro.modversion=9.0.0-RC0-d2tmo-UNOFFICIAL
ro.config.ringtone=CyanTone.ogg
ro.config.notification_sound=CyanMessage.ogg
ro.config.alarm_alert=CyanAlarm.ogg
ro.kernel.android.checkjni=1
ro.setupwizard.mode=OPTIONAL
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.factorytest=0
ro.serialno=b40cdee5
ro.bootmode=unknown
ro.baseband=msm
ro.carrier=unknown
ro.bootloader=T999UVUEMJC
ro.hardware=qcom
ro.revision=16
ro.emmc=1
init.svc.recovery=running
service.adb.root=1
init.svc.adbd=running
I:Copying file /cache/recovery/log to /cache/recovery/last_log
I:Attempt to load settings from settings file...
I:Loading settings from '/data/media/0/TWRP/.twrps'.
I:Backup folder set to '/data/media/0/TWRP/BACKUPS/b40cdee5'
I:Copying file /etc/recovery.fstab to /cache/recovery/recovery.fstab
I:Version number saved to '/cache/recovery/.version'
I:Switching packages (TWRP)
I:Set page: 'action_page'
I:Script file found: '/cache/recovery/openrecoveryscript'
I:Copying file /cache/recovery/openrecoveryscript to /tmp/openrecoveryscript
Processing OpenRecoveryScript file...
I:command is: 'install' and I:value is: '/sdcard/CARBON-JB-NIGHTLY-20131117-0452-d2tmo.zip'
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
Installing zip file '/sdcard/CARBON-JB-NIGHTLY-20131117-0452-d2tmo.zip'
Installing '/sdcard/CARBON-JB-NIGHTLY-20131117-0452-d2tmo.zip'...
Checking for MD5 file...
I:Cannot find file /sdcard/CARBON-JB-NIGHTLY-20131117-0452-d2tmo.zip.md5
Skipping MD5 check: no MD5 file found.
I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts
script aborted: assert failed: getprop("ro.bootloader") == "T999UVDLJA" ||
getprop("ro.bootloader") == "T999UVDLJC" ||
getprop("ro.bootloader") == "T999UVDMD5" ||
getprop("ro.bootloader") == "T999VVLDLL1" ||
getprop("ro.bootloader") == "T999LUVAMB7" ||
getprop("ro.bootloader") == "T999VVLDMF2"
assert failed: getprop("ro.bootloader") == "T999UVDLJA" || getprop("ro.bootloader") == "T999UVDLJC" || getprop("ro.bootloader") == "T999UVDMD5" || getprop("ro.bootloader") == "T999VVLDLL1" || getprop("ro.bootloader") == "T999LUVAMB7" || getprop("ro.bootloader") == "T999VVLDMF2"
E:Error executing updater binary in zip '/sdcard/CARBON-JB-NIGHTLY-20131117-0452-d2tmo.zip'
E:Error installing zip file '/sdcard/CARBON-JB-NIGHTLY-20131117-0452-d2tmo.zip'
Done processing script file
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Switching packages (TWRP)
I:Set page: 'install'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'flash_zip'
I:Set page: 'flash_zip'
Installing '/sdcard/CARBON-JB-NIGHTLY-20131117-0452-d2tmo.zip'...
Checking for MD5 file...
I:Cannot find file /sdcard/CARBON-JB-NIGHTLY-20131117-0452-d2tmo.zip.md5
Skipping MD5 check: no MD5 file found.
I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts
script aborted: assert failed: getprop("ro.bootloader") == "T999UVDLJA" ||
getprop("ro.bootloader") == "T999UVDLJC" ||
getprop("ro.bootloader") == "T999UVDMD5" ||
getprop("ro.bootloader") == "T999VVLDLL1" ||
getprop("ro.bootloader") == "T999LUVAMB7" ||
getprop("ro.bootloader") == "T999VVLDMF2"
assert failed: getprop("ro.bootloader") == "T999UVDLJA" || getprop("ro.bootloader") == "T999UVDLJC" || getprop("ro.bootloader") == "T999UVDMD5" || getprop("ro.bootloader") == "T999VVLDLL1" || getprop("ro.bootloader") == "T999LUVAMB7" || getprop("ro.bootloader") == "T999VVLDMF2"
E:Error executing updater binary in zip '/sdcard/CARBON-JB-NIGHTLY-20131117-0452-d2tmo.zip'
Error flashing zip '/sdcard/CARBON-JB-NIGHTLY-20131117-0452-d2tmo.zip'
Updating partition details...
Iata backup size is 2309MB, size: 12335MB, used: 2661MB, free: 9543MB, in data/media: 352MB.
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
I:Set page: 'flash_done'
I:Set page: 'clear_vars'
I:Set page: 'install'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
I:Copying file /tmp/recovery.log to /data/media/0/recovery.log
Related
Hello everyone, I hope this thread is in the right spot. I know that this has been asked a thousand times, but I can't seem to find any answers specific to my model, SGH-T999V with Mobilicity (MCT).
Up until about a couple of weeks ago, I've been able to keep on top of the CM10.1 nightlies, but then one day I got an 'get assert failed' message. I used the CM10 built in updater to download the updates directly to the phone. I figured it might just be an odd file that doesn't work. So I kept on trying every few days, and all the updates did the same thing. I found out that I had to update my baseband to VLDLL1 (was on VLAHL2 or something like that), which I did by Odin Flashing the stock rooted firmware (r00t66). I used CWM 6.0.3.1 this whole time, and once that firmware was on I figured I could flash the d2tmo update and it would go smoothly since it has the new firmware. Same problem. Next I installed TWRP 2.5.0.0 using GooManager because I read it was good, and it still does the same thing. I've done factory resets and then tried flashing, but no luck. I spent hours trying to get it to flash. Here's a log of what TWRP says:
ro.hardware=qcom
ro.revision=16
ro.emmc=1
init.svc.recovery=running
init.svc.adbd=restarting
service.adb.root=1
I:Copying file /cache/recovery/log to
/cache/recovery/last_log
I:Attempt to load settings from settings file...
I:Loading settings from '/data/media/TWRP/.twrps'.
I:Backup folder set to '/data/media/TWRP/BACKUPS/8a18bcef'
I:Version number saved to '/cache/recovery/.version'
I:Unable to mount '/external_sdcard'
I:Actual block device: '', current file system: 'vfat'
I:Switching packages (TWRP)
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'flash_zip'
I:Set page: 'flash_zip'
Installing '/sdcard/CM10.1/cm-10.1-20130121-EXPERIMENTAL-d2tmo-M1.zip'...
Checking for MD5 file...
I:Cannot find file /sdcard/CM10.1/cm-10.1-20130121-EXPERIMENTAL-d2tmo-M1.zip.md5
Skipping MD5 check: no MD5 file found.
script aborted: assert failed: getprop("ro.product.device") == "d2tmo" || getprop("ro.build.product") == "d2tmo"
assert failed: getprop("ro.product.device") == "d2tmo" || getprop("ro.build.product") == "d2tmo"
E:Error executing updater binary in zip '/sdcard/CM10.1/cm-10.1-20130121-EXPERIMENTAL-d2tmo-M1.zip'
Error flashing zip '/sdcard/CM10.1/cm-10.1-20130121-EXPERIMENTAL-d2tmo-M1.zip'
Updating partition details...
Iata backup size is 952MB, size: 12335MB, used: 5225MB, free: 6965MB, in data/media: 4272MB.
I:Unable to mount '/external_sdcard'
I:Actual block device: '', current file system: 'vfat'
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
I:Set page: 'flash_done'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
I:Copying file /tmp/recovery.log to /data/media/recovery.log
Can anyone tell me what I'm doing wrong?
Flash this and reboot so it sticks.
http://forum.xda-developers.com/showthread.php?t=
That's got the Canadian s3. Which is what you have, correct? Read the OP carefully.
Then do a clean flash of CM10.1
Sent from my SGH-T999 using xda app-developers app
IXChicharitoXI said:
Flash this and reboot so it sticks.
http://forum.xda-developers.com/showthread.php?t=
That's got the Canadian s3. Which is what you have, correct? Read the OP carefully.
Then do a clean flash of CM10.1
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
No post specified..
Just saw. Weird, ok. Here's the US version. On the OP there's a link that'll direct you to the T999v thread.
http://forum.xda-developers.com/showthread.php?t=2282603
No not flash the US version or you'll hard brick your phone.
Sent from my SGH-T999 using xda app-developers app
IXChicharitoXI said:
Just saw. Weird, ok. Here's the US version. On the OP there's a link that'll direct you to the T999v thread.
http://forum.xda-developers.com/showthread.php?t=2282603
No not flash the US version or you'll hard brick your phone.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Same damn problem. Tried both firmwares, no radio and with the modem.
T999V VLDLL1 Bootloader / FW / Modem Update: https://dl.dropboxusercontent.com/u/...irmware_v1.zip (md5: cf7dea561aff0182f26f231b49f7ed6d)
T999V VLDLL1 Bootloader / FW Update (w/o Modem): https://dl.dropboxusercontent.com/u/...noradio_v1.zip (md5: cd677dbc0ba221672c55108da6729a98)
Here's the log:
Starting TWRP 2.5.0.0 on Sun Jun 2 15:22:05 2013
BOARD_HAS_NO_REAL_SDCARD := true
I:Internal path defined: '/data/media'
I:External path defined: '/external_sdcard'
I:Mount: Unable to find partition for path '/data'
TW_NO_REBOOT_BOOTLOADER := true
RECOVERY_SDCARD_ON_DATA := true
I:Lun file '/sys/devices/virtual/android_usb/android0/f_mass_storage/lun_ex/file'
TW_HAS_DOWNLOAD_MODE := true
TW_INCLUDE_CRYPTO := true
I:TW_BRIGHTNESS_PATH := /sys/devices/platform/msm_fb.524801/leds/lcd-backlight/brightness
Starting the UI...Pixel format: 720x1280 @ 32bpp
Pixel format: RGBX_8888
framebuffer: fd 4 (720 x 1280)
=> Linking mtab
=> Processing recovery.fstab
Irocessing '/boot'
Irocessing '/system'
Irocessing '/data'
I:Backup folder set to '/data/media/TWRP/BACKUPS/8a18bcef'
I:Settings storage is '/data/media'
Irocessing '/cache'
Irocessing '/recovery'
Irocessing '/external_sdcard'
I:Created '/external_sdcard' folder.
Irocessing '/usb-otg'
I:Created '/usb-otg' folder.
Updating partition details...
Iata backup size is 963MB, size: 12335MB, used: 5250MB, free: 6941MB, in data/media: 4287MB.
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
I:Unmounting main partitions...
Partition Logs:
/boot | /dev/block/mmcblk0p7 | Size: 10MB
Flags: Can_Be_Backed_Up IsPresent
Primary_Block_Device: /dev/block/mmcblk0p7
Display_Name: Boot
Storage_Name: boot
Backup_Path: /boot
Backup_Name: boot
Backup_Display_Name: Boot
Storage_Path: /boot
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/system | /dev/block/mmcblk0p14 | Size: 1476MB Used: 945MB Free: 531MB Backup Size: 945MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p14
Display_Name: System
Storage_Name: System
Backup_Path: /system
Backup_Name: system
Backup_Display_Name: System
Storage_Path: /system
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/data | /dev/block/mmcblk0p15 | Size: 12335MB Used: 5250MB Free: 6941MB Backup Size: 963MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent Can_Be_Encrypted Has_Data_Media Is_Storage Is_Settings_Storage
Symlink_Path: /data/media
Symlink_Mount_Point: /sdcard
Primary_Block_Device: /dev/block/mmcblk0p15
Length: -16384
Display_Name: Data
Storage_Name: Internal Storage
Backup_Path: /data
Backup_Name: data
Backup_Display_Name: Data
Storage_Path: /data/media
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/cache | /dev/block/mmcblk0p17 | Size: 826MB Used: 14MB Free: 812MB Backup Size: 14MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p17
Display_Name: Cache
Storage_Name: Cache
Backup_Path: /cache
Backup_Name: cache
Backup_Display_Name: Cache
Storage_Path: /cache
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/recovery | /dev/block/mmcblk0p18 | Size: 10MB
Flags: Can_Be_Backed_Up IsPresent
Primary_Block_Device: /dev/block/mmcblk0p18
Display_Name: Recovery
Storage_Name: recovery
Backup_Path: /recovery
Backup_Name: recovery
Backup_Display_Name: Recovery
Storage_Path: /recovery
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/external_sdcard | /dev/block/mmcblk1p1 | Size: 30595MB Used: 10821MB Free: 19773MB Backup Size: 10821MB
Flags: Can_Be_Mounted Can_Be_Wiped Wipe_Available_in_GUI Removable IsPresent Is_Storage
Primary_Block_Device: /dev/block/mmcblk1p1
Alternate_Block_Device: /dev/block/mmcblk1
Display_Name: Micro SDcard
Storage_Name: Micro SDcard
Backup_Path: /external_sdcard
Backup_Name: external_sdcard
Backup_Display_Name: Micro SDcard
Storage_Path: /external_sdcard
Current_File_System: vfat
Fstab_File_System: vfat
Backup_Method: files
/usb-otg | | Size: 0MB Used: 0MB Free: 0MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Wipe_Available_in_GUI Removable Is_Storage
Primary_Block_Device: /dev/block/sda1
Alternate_Block_Device: /dev/block/sda
Display_Name: USB-OTG
Storage_Name: USB-OTG
Backup_Path: /usb-otg
Backup_Name: usb-otg
Backup_Display_Name: USB-OTG
Storage_Path: /usb-otg
Current_File_System: vfat
Fstab_File_System: vfat
Backup_Method: files
I:Loading package: TWRP (/script/ui.xml)
I:Loading package: TWRP (/data/media/TWRP/theme/ui.zip)
I:Loading package: TWRP (/res/ui.xml)
I:Loading resources...
I:Loading variables...
I:Loading pages...
I:Loading page main
I:Loading page main2
I:Loading page install
I:Loading page flash_confirm
I:Loading page flash_zip
I:Loading page flash_done
I:Loading page clear_vars
I:Loading page confirm_action
I:Loading page action_page
I:Loading page singleaction_page
I:Loading page action_complete
I:Loading page filecheck
I:Loading page rebootcheck
I:Loading page wipe
I:Loading page advancedwipe
I:Loading page formatdata
I:Loading page formatdata_confirm
I:Loading page backup
I:Loading page backupname1
I:Loading page backupname2
I:Loading page backup_run
I:Loading page restore
I:Loading page restore_select
I:Loading page renamebackup
I:Loading page restore_run
I:Loading page selectstorage
I:Loading page mount
I:Loading page usb_mount
I:Loading page usb_umount
I:Loading page reboot
I:Loading page settings
I:Loading page timezone
I:Loading page screen
I:Loading page advanced
I:Loading page partsdcard
I:Loading page htcdumlock
I:Loading page lock
I:Loading page filemanagerlist
I:Loading page filemanageroptions
I:Loading page choosedestinationfolder
I:Loading page filemanagerrenamefile
I:Loading page filemanagerrenamefolder
I:Loading page filemanagerchmod
I:Loading page filemanagerconfirm
I:Loading page filemanageracction
I:Loading page decrypt
I:Loading page trydecrypt
I:Loading page terminalfolder
I:Loading page terminalcommand
I:Loading page sideload
I:Loading page installsu
I:Loading page fixsu
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Switching packages (TWRP)
E:Cannot load volume /misc!
E:Cannot load volume /misc!
Startup Commands: ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.sys.usb.config=mtp,adb
ro.build.id=IMM76L
ro.build.display.id=cm_d2can-eng 4.0.4 IMM76L eng.dees_troy.20130408.213155 test-keys
ro.build.version.incremental=eng.dees_troy.20130408.213155
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Mon Apr 8 21:32:06 UTC 2013
ro.build.date.utc=0
ro.build.type=eng
ro.build.user=dees_troy
ro.build.host=ded1.ktechnology.net
ro.build.tags=test-keys
ro.product.model=SAMSUNG-SGH-I747
ro.product.brand=samsung
ro.product.name=d2uc
ro.product.device=d2can
ro.product.board=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8960
ro.build.product=d2can
ro.build.description=samsung/d2uc/d2can:4.0.4/IMM76D/I747UCALEM:user/release-keys
ro.build.fingerprint=d2uc-user 4.0.4 IMM76D I747UCALEM release-keys
ro.build.characteristics=default
ro.cm.device=d2can
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
dev.pm.dyn_samplingrate=1
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-fma2dp=false
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
lpa.decode=false
lpa.use-stagefright=false
ro.use_data_netmgrd=true
persist.data_netmgrd_nint=16
ro.emmc.sdcard.partition=17
persist.timed.enable=true
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.speaker.location=high
ro.opengles.version=131072
ro.ril.transmitpower=true
ro.telephony.call_ring.multiple=0
ro.sf.lcd_density=320
persist.gps.qmienabled=true
ro.telephony.ril_class=SamsungQualcommUiccRIL
telephony.lteOnGsmDevice=1
ro.telephony.ril.v3=qcomuiccstack
persist.radio.apm_sim_not_pwdn=1
persist.radio.add_power_save=1
persist.radio.snapshot_disabled=1
debug.enabletr=true
com.qc.hardware=true
ro.sf.compbypass.enable=1
com.qc.hdmi_out=true
ro.hdmi.enable=true
debug.sf.hw=1
debug.composition.type=dyn
ro.cwm.enable_key_repeat=true
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
ro.rommanager.developerid=cyanogenmod
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dataroaming=false
ro.cm.version=9.0.0-RC0-d2can-UNOFFICIAL
ro.modversion=9.0.0-RC0-d2can-UNOFFICIAL
ro.config.ringtone=CyanTone.ogg
ro.config.notification_sound=CyanMessage.ogg
ro.config.alarm_alert=CyanAlarm.ogg
ro.kernel.android.checkjni=1
ro.setupwizard.mode=OPTIONAL
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.factorytest=0
ro.serialno=8a18bcef
ro.bootmode=unknown
ro.baseband=msm
ro.carrier=unknown
ro.bootloader=T999VVLDLL1
ro.hardware=qcom
ro.revision=16
ro.emmc=1
init.svc.recovery=running
init.svc.adbd=restarting
service.adb.root=1
I:Copying file /cache/recovery/log to /cache/recovery/last_log
I:Attempt to load settings from settings file...
I:Loading settings from '/data/media/TWRP/.twrps'.
I:Backup folder set to '/data/media/TWRP/BACKUPS/8a18bcef'
I:Version number saved to '/cache/recovery/.version'
I:Switching packages (TWRP)
I:Set page: 'install'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'flash_zip'
I:Set page: 'flash_zip'
Installing '/sdcard/CM10.1/modem/T999V_VLDLL1_firmware_v1.zip'...
Checking for MD5 file...
I:Cannot find file /sdcard/CM10.1/modem/T999V_VLDLL1_firmware_v1.zip.md5
Skipping MD5 check: no MD5 file found.
script aborted: assert failed: getprop("ro.product.device") == "d2tmo" || getprop("ro.build.product") == "d2tmo"
assert failed: getprop("ro.product.device") == "d2tmo" || getprop("ro.build.product") == "d2tmo"
E:Error executing updater binary in zip '/sdcard/CM10.1/modem/T999V_VLDLL1_firmware_v1.zip'
Error flashing zip '/sdcard/CM10.1/modem/T999V_VLDLL1_firmware_v1.zip'
Updating partition details...
Iata backup size is 963MB, size: 12335MB, used: 5250MB, free: 6941MB, in data/media: 4287MB.
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
I:Set page: 'flash_done'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
Formatting Cache using make_ext4fs...
I:make_ext4fs command: make_ext4fs /dev/block/mmcblk0p17
Done.
I:Recreating /cache/recovery folder.
I:Version number saved to '/cache/recovery/.version'
Updating partition details...
Iata backup size is 963MB, size: 12335MB, used: 5250MB, free: 6941MB, in data/media: 4287MB.
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
I:Set page: 'action_complete'
Wiping Dalvik Cache Directories...
Cleaned: /data/dalvik-cache...
-- Dalvik Cache Directories Wipe Complete!
Updating partition details...
Iata backup size is 830MB, size: 12335MB, used: 5117MB, free: 7074MB, in data/media: 4287MB.
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
I:Set page: 'clear_vars'
I:Set page: 'flash_done'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'flash_zip'
I:Set page: 'flash_zip'
Installing '/sdcard/CM10.1/modem/T999V_VLDLL1_firmware_v1.zip'...
Checking for MD5 file...
I:Cannot find file /sdcard/CM10.1/modem/T999V_VLDLL1_firmware_v1.zip.md5
Skipping MD5 check: no MD5 file found.
script aborted: assert failed: getprop("ro.product.device") == "d2tmo" || getprop("ro.build.product") == "d2tmo"
assert failed: getprop("ro.product.device") == "d2tmo" || getprop("ro.build.product") == "d2tmo"
E:Error executing updater binary in zip '/sdcard/CM10.1/modem/T999V_VLDLL1_firmware_v1.zip'
Error flashing zip '/sdcard/CM10.1/modem/T999V_VLDLL1_firmware_v1.zip'
Updating partition details...
Iata backup size is 830MB, size: 12335MB, used: 5117MB, free: 7074MB, in data/media: 4287MB.
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
I:Set page: 'flash_done'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'flash_zip'
I:Set page: 'flash_zip'
Installing '/sdcard/CM10.1/modem/T999V_VLDLL1_noradio_v1.zip'...
Checking for MD5 file...
I:Cannot find file /sdcard/CM10.1/modem/T999V_VLDLL1_noradio_v1.zip.md5
Skipping MD5 check: no MD5 file found.
script aborted: assert failed: getprop("ro.product.device") == "d2tmo" || getprop("ro.build.product") == "d2tmo"
assert failed: getprop("ro.product.device") == "d2tmo" || getprop("ro.build.product") == "d2tmo"
E:Error executing updater binary in zip '/sdcard/CM10.1/modem/T999V_VLDLL1_noradio_v1.zip'
Error flashing zip '/sdcard/CM10.1/modem/T999V_VLDLL1_noradio_v1.zip'
Updating partition details...
Iata backup size is 830MB, size: 12335MB, used: 5117MB, free: 7074MB, in data/media: 4287MB.
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
I:Set page: 'flash_done'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
I:Copying file /tmp/recovery.log to /data/media/recovery.log
I'm using TWRP 2.5.0.0 if that matters, I was getting the same errors in CWM 6.0.3.1 as well. I do have Superuser and root access in the OS.
Your options are:
1) Download the d2tmo version of your recovery.
2) Edit the update script in the firmware zip file to correctly support your device.
assert failed: getprop("ro.product.device") == "d2tmo" || getprop("ro.build.product") == "d2tmo"
Click to expand...
Click to collapse
That means that the script is expecting a d2tmo recovery. And it's not seeing it. Because you are using a d2can recovery. You are right, script is wrong.
Aerowinder said:
Your options are:
1) Download the d2tmo version of your recovery.
2) Edit the update script in the firmware zip file to correctly support your device.
That means that the script is expecting a d2tmo recovery. And it's not seeing it. Because you are using a d2can recovery. You are right, script is wrong.
Click to expand...
Click to collapse
Which file am I updating? Can I extract the zip, edit the file, and then zip it again? What am I changing? Not sure why d2tmo worked for months and all of a sudden they don't flash anymore?
After giving up for a month I decided to try again. This time I flashed the D2TMO image file of Team Win Recovery and it worked. I had the D2CAN image that was automatically installed by GooManager, and that was not allowing the image to install. Thank you all for your help.
Some time in June they added the asserts for the V and L variants to the nightly builds. I have been running on CM10.1 nightly since 622, I'm up to 701 and am switching to updating weekly rather than nightly, it is a good bit of work and there isn't a need to update nightly for me.
Good to hear that you got it working, the d2tmo should continue to work for your V.
Sent from my SGH-T999L using xda app-developers app
DJ_SpaRky said:
Some time in June they added the asserts for the V and L variants to the nightly builds. I have been running on CM10.1 nightly since 622, I'm up to 701 and am switching to updating weekly rather than nightly, it is a good bit of work and there isn't a need to update nightly for me.
Good to hear that you got it working, the d2tmo should continue to work for your V.
Sent from my SGH-T999L using xda app-developers app
Click to expand...
Click to collapse
That is true for the bootloader, but not true for recoveries. Not sure why there is a d2can TWRP. Nothing supports it.
Could he flash a TWRP version for d2tmo over top the d2can one? Or at a last resort use adb to write it?
Sent from my SGH-T999L using xda app-developers app
DJ_SpaRky said:
Could he flash a TWRP version for d2tmo over top the d2can one? Or at a last resort use adb to write it?
Sent from my SGH-T999L using xda app-developers app
Click to expand...
Click to collapse
Yep, that's what he did, along with the rest of the V/L users. Having a d2can, or d2tmolte recovery is a good idea. But the people writing the scripts are not adding these devices to their assertions, rendering them useless. You still need to watch the firmware flashing, and make sure what you are flashing isn't flashing a modem also, or something like that.
Aerowinder said:
Yep, that's what he did, along with the rest of the V/L users. Having a d2can, or d2tmolte recovery is a good idea. But the people writing the scripts are not adding these devices to their assertions, rendering them useless. You still need to watch the firmware flashing, and make sure what you are flashing isn't flashing a modem also, or something like that.
Click to expand...
Click to collapse
OK, thanks for this good info.
When I flashed a new ROM...(ProBam) something went wrong.
I thought that it was a bootloader issue, but I'm not really sure. I could definitely use some help.
I can, shockingly get my phone to boot and I am great full for that, but it's definitely causing a ton of issues, plus the fact that it wont let me flash anything else now. Not even my Nandroid backups will work.
I do remember reading something about the Bootloader for 4.3 being different...but I'm not really sure if that is the issue.
Apparently my recovery can't find my E:\ directory.
Thanks for looking.
Log Below
Starting TWRP 2.6.0.0 on Mon Nov 4 19:28:27 2013
BOARD_HAS_NO_REAL_SDCARD := true
I:Internal path defined: '/data/media'
I:External path defined: '/external_sd'
I:Mount: Unable to find partition for path '/data'
TW_NO_REBOOT_BOOTLOADER := true
RECOVERY_SDCARD_ON_DATA := true
I:Lun file '/sys/devices/virtual/android_usb/android0/f_mass_storage/lun_ex/file'
TW_HAS_DOWNLOAD_MODE := true
TW_INCLUDE_CRYPTO := true
I:TW_BRIGHTNESS_PATH := /sys/devices/platform/msm_fb.524801/leds/lcd-backlight/brightness
Starting the UI...Pixel format: 720x1280 @ 32bpp
Pixel format: RGBX_8888
framebuffer: fd 4 (720 x 1280)
=> Linking mtab
=> Processing recovery.fstab
Irocessing '/boot'
Irocessing '/system'
Irocessing '/data'
I:Backup folder set to '/data/media/0/TWRP/BACKUPS/c9132eb7'
I:Settings storage is '/data/media/0'
Irocessing '/cache'
Irocessing '/recovery'
Irocessing '/external_sd'
Irocessing '/usb-otg'
I:Created '/usb-otg' folder.
Updating partition details...
E:error opening '/data/lost+found'
E:error: Not a directory
E:error opening '/data/lost+found'
E:error: Not a directory
E:error opening '/data/lost+found'
E:error: Not a directory
E:error opening '/data/lost+found'
E:error: Not a directory
E:error opening '/data/lost+found'
E:error: Not a directory
E:error opening '/data/lost+found'
E:error: Not a directory
E:error opening '/data/lost+found'
E:error: Not a directory
E:error opening '/data/lost+found'
E:error: Not a directory
E:error opening '/data/lost+found'
E:error: Not a directory
Iata backup size is 1300MB, size: 12335MB, used: 1303MB, free: 10865MB, in data/media: 2MB.
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
I:Unmounting main partitions...
Partition Logs:
/boot | /dev/block/mmcblk0p7 | Size: 10MB
Flags: Can_Be_Backed_Up IsPresent
Primary_Block_Device: /dev/block/mmcblk0p7
Display_Name: Boot
Storage_Name: boot
Backup_Path: /boot
Backup_Name: boot
Backup_Display_Name: Boot
Storage_Path: /boot
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/system | /dev/block/mmcblk0p14 | Size: 1476MB Used: 499MB Free: 976MB Backup Size: 499MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p14
Display_Name: System
Storage_Name: System
Backup_Path: /system
Backup_Name: system
Backup_Display_Name: System
Storage_Path: /system
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/data | /dev/block/mmcblk0p15 | Size: 12335MB Used: 1303MB Free: 10865MB Backup Size: 1300MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent Can_Be_Encrypted Has_Data_Media Can_Encrypt_Backup Use_Userdata_Encryption Is_Storage Is_Settings_Storage
Symlink_Path: /data/media/0
Symlink_Mount_Point: /sdcard
Primary_Block_Device: /dev/block/mmcblk0p15
Length: -16384
Display_Name: Data
Storage_Name: Internal Storage
Backup_Path: /data
Backup_Name: data
Backup_Display_Name: Data
Storage_Path: /data/media/0
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/cache | /dev/block/mmcblk0p17 | Size: 826MB Used: 163MB Free: 663MB Backup Size: 163MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p17
Display_Name: Cache
Storage_Name: Cache
Backup_Path: /cache
Backup_Name: cache
Backup_Display_Name: Cache
Storage_Path: /cache
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/recovery | /dev/block/mmcblk0p18 | Size: 10MB
Flags: Can_Be_Backed_Up IsPresent
Primary_Block_Device: /dev/block/mmcblk0p18
Display_Name: Recovery
Storage_Name: recovery
Backup_Path: /recovery
Backup_Name: recovery
Backup_Display_Name: Recovery
Storage_Path: /recovery
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/external_sd | /dev/block/mmcblk1p1 | Size: 29930MB Used: 14832MB Free: 15098MB Backup Size: 14832MB
Flags: Can_Be_Mounted Can_Be_Wiped Wipe_Available_in_GUI Removable IsPresent Is_Storage
Primary_Block_Device: /dev/block/mmcblk1p1
Alternate_Block_Device: /dev/block/mmcblk1
Display_Name: Micro SDcard
Storage_Name: Micro SDcard
Backup_Path: /external_sd
Backup_Name: external_sd
Backup_Display_Name: Micro SDcard
Storage_Path: /external_sd
Current_File_System: vfat
Fstab_File_System: vfat
Backup_Method: files
/usb-otg | | Size: 0MB Used: 0MB Free: 0MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Wipe_Available_in_GUI Removable Is_Storage
Primary_Block_Device: /dev/block/sda1
Alternate_Block_Device: /dev/block/sda
Display_Name: USB-OTG
Storage_Name: USB-OTG
Backup_Path: /usb-otg
Backup_Name: usb-otg
Backup_Display_Name: USB-OTG
Storage_Path: /usb-otg
Current_File_System: vfat
Fstab_File_System: vfat
Backup_Method: files
I:Loading package: TWRP (/script/ui.xml)
I:Loading package: TWRP (/data/media/0/TWRP/theme/ui.zip)
I:Loading package: TWRP (/res/ui.xml)
I:Loading resources...
I:Loading variables...
I:Loading pages...
I:Loading page main
I:Loading page main2
I:Loading page install
I:Loading page flash_confirm
I:Loading page flash_zip
I:Loading page flash_done
I:Loading page clear_vars
I:Loading page confirm_action
I:Loading page action_page
I:Loading page singleaction_page
I:Loading page action_complete
I:Loading page filecheck
I:Loading page rebootcheck
I:Loading page wipe
I:Loading page advancedwipe
I:Loading page formatdata
I:Loading page formatdata_confirm
I:Loading page backup
I:Loading page backupname1
I:Loading page backupname2
I:Loading page backupencryption
I:Loading page backupencryption2
I:Loading page checkbackuppassword
I:Loading page backup_run
I:Loading page restore
I:Unable to open '/data/media/0/TWRP/BACKUPS/c9132eb7'
I:Loading page restore_read
I:Loading page restore_decrypt
I:Loading page try_restore_decrypt
I:Loading page restore_select
I:Loading page renamebackup
I:Loading page restore_run
I:Loading page selectstorage
I:Loading page mount
I:Loading page usb_mount
I:Loading page usb_umount
I:Loading page reboot
I:Loading page settings
I:Loading page timezone
I:Loading page screen
I:Loading page advanced
I:Loading page partsdcard
I:Loading page htcdumlock
I:Loading page lock
I:Loading page filemanagerlist
I:Loading page filemanageroptions
I:Loading page choosedestinationfolder
I:Loading page filemanagerrenamefile
I:Loading page filemanagerrenamefolder
I:Loading page filemanagerchmod
I:Loading page filemanagerconfirm
I:Loading page filemanageracction
I:Loading page decrypt
I:Loading page trydecrypt
I:Loading page terminalfolder
I:Loading page terminalcommand
I:Loading page sideload
I:Loading page installsu
I:Loading page fixsu
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Switching packages (TWRP)
E:Cannot load volume /misc!
E:Cannot load volume /misc!
Startup Commands: ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.sys.usb.config=mtp,adb
ro.build.id=IMM76L
ro.build.display.id=cm_d2att-eng 4.0.4 IMM76L eng.dees_troy.20130708.150317 test-keys
ro.build.version.incremental=eng.dees_troy.20130708.150317
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Mon Jul 8 15:03:28 UTC 2013
ro.build.date.utc=0
ro.build.type=eng
ro.build.user=dees_troy
ro.build.host=ded1.ktechnology.net
ro.build.tags=test-keys
ro.product.model=SAMSUNG-SGH-I747
ro.product.brand=samsung
ro.product.name=d2uc
ro.product.device=d2att
ro.product.board=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8960
ro.build.product=d2att
ro.build.description=samsung/d2uc/d2att:4.0.4/IMM76D/I747UCALEM:user/release-keys
ro.build.fingerprint=d2uc-user 4.0.4 IMM76D I747UCALEM release-keys
ro.build.characteristics=default
ro.cm.device=d2att
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
dev.pm.dyn_samplingrate=1
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-fma2dp=false
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
lpa.decode=false
lpa.use-stagefright=false
ro.use_data_netmgrd=true
persist.data_netmgrd_nint=16
ro.emmc.sdcard.partition=17
persist.timed.enable=true
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.speaker.location=high
ro.opengles.version=131072
ro.ril.transmitpower=true
ro.telephony.call_ring.multiple=0
ro.sf.lcd_density=320
persist.gps.qmienabled=true
ro.telephony.ril_class=SamsungQualcommUiccRIL
telephony.lteOnGsmDevice=1
ro.telephony.ril.v3=qcomuiccstack
persist.radio.apm_sim_not_pwdn=1
persist.radio.add_power_save=1
persist.radio.snapshot_disabled=1
debug.enabletr=true
com.qc.hardware=true
ro.sf.compbypass.enable=1
com.qc.hdmi_out=true
ro.hdmi.enable=true
debug.sf.hw=1
debug.composition.type=dyn
ro.cwm.enable_key_repeat=true
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
ro.rommanager.developerid=cyanogenmod
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dataroaming=false
ro.cm.version=9.0.0-RC0-d2att-UNOFFICIAL
ro.modversion=9.0.0-RC0-d2att-UNOFFICIAL
ro.config.ringtone=CyanTone.ogg
ro.config.notification_sound=CyanMessage.ogg
ro.config.alarm_alert=CyanAlarm.ogg
ro.kernel.android.checkjni=1
ro.setupwizard.mode=OPTIONAL
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.factorytest=0
ro.serialno=c9132eb7
ro.bootmode=unknown
ro.baseband=msm
ro.carrier=unknown
ro.bootloader=I747UCDLK3
ro.hardware=qcom
ro.revision=16
ro.emmc=1
init.svc.recovery=running
service.adb.root=1
init.svc.adbd=running
I:Copying file /cache/recovery/log to /cache/recovery/last_log
I:Attempt to load settings from settings file...
I:Loading settings from '/data/media/0/TWRP/.twrps'.
I:Backup folder set to '/external_sd/TWRP/BACKUPS/c9132eb7'
I:Copying file /etc/recovery.fstab to /cache/recovery/recovery.fstab
I:Version number saved to '/cache/recovery/.version'
I:Switching packages (TWRP)
I:Set page: 'install'
I:Set page: 'selectstorage'
I:Set page: 'clear_vars'
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'flash_zip'
I:Set page: 'flash_zip'
Installing '/external_sd/boot_CWM_I747UCDMG2.zip'...
Checking for MD5 file...
I:Cannot find file /external_sd/boot_CWM_I747UCDMG2.zip.md5
Skipping MD5 check: no MD5 file found.
Installing bootloader...
about to run program [/tmp/flash_image] with 3 args
about to run program [/tmp/flash_image] with 3 args
about to run program [/tmp/flash_image] with 3 args
about to run program [/tmp/flash_image] with 3 args
about to run program [/tmp/flash_image] with 3 args
script result was [1]
Updating partition details...
E:error opening '/data/lost+found'
E:error: Not a directory
E:error opening '/data/lost+found'
E:error: Not a directory
E:error opening '/data/lost+found'
E:error: Not a directory
E:error opening '/data/lost+found'
E:error: Not a directory
E:error opening '/data/lost+found'
E:error: Not a directory
E:error opening '/data/lost+found'
E:error: Not a directory
E:error opening '/data/lost+found'
E:error: Not a directory
E:error opening '/data/lost+found'
E:error: Not a directory
E:error opening '/data/lost+found'
E:error: Not a directory
Iata backup size is 1300MB, size: 12335MB, used: 1303MB, free: 10865MB, in data/media: 2MB.
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
I:Set page: 'flash_done'
I:Set page: 'clear_vars'
I:Set page: 'install'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'settings'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'wipe'
I:Set page: 'advancedwipe'
I:Set page: 'wipe'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'mount'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'settings'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'settings'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
I:Copying file /tmp/recovery.log to /external_sd/recovery.log
After looking at the Rom thread, I can you that ProBam is not an Alliance Rom. Please edit your post accordingly
That said, I would recommend flashing back to stock with Odin or heimdall. And when you dl the Rom again, verify md5 sums on the Rom and the gapps.
Thanks for the reply. I originally had the alliance ROM and then I flashed probam or what ever is called. I didn't mean for it to sound as if they are the same.
mrhaley30705 said:
After looking at the Rom thread, I can you that ProBam is not an Alliance Rom. Please edit your post accordingly
That said, I would recommend flashing back to stock with Odin or heimdall. And when you dl the Rom again, verify md5 sums on the Rom and the gapps.
Click to expand...
Click to collapse
Iskor12 said:
Thanks for the reply. I originally had the alliance ROM and then I flashed probam or what ever is called. I didn't mean for it to sound as if they are the same.
Click to expand...
Click to collapse
I flashed the stock ROM via Odin.
Now my phone can't get past the glowing Samsung logo. It won't boot up.
My custom recovery is now gone too.
Try clearing cache first, if that doesn't work do a factory reset. Both can be done through the stock recovery
hey guys I am busy writing a script to create a flashable zip acording to the selections made.
basically it is a GUI for windows. you select apps to remove and what to replace and it builds a zip accordingly.
I am having a problem with getting the zip to flash.
attached it the program and the flashable zip.
Code:
__bionic_open_tzdata: couldn't find any tzdata when looking for localtime!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
Starting TWRP 2.7.1.0 on Mon Sep 22 09:22:34 2014
I:Internal path defined: '/data/media'
I:External path defined: '/external_sd'
I:Mount: Unable to find partition for path '/data'
RECOVERY_SDCARD_ON_DATA := true
I:Lun file '/sys/devices/platform/usb_mass_storage/lun0/file' does not exist, USB storage mode disabled
TW_INCLUDE_INJECTTWRP := true
I:Found brightness file at '/sys/devices/virtual/backlight/panel/brightness'
Starting the UI...Pixel format: 1280x800 @ 32bpp
Pixel format: BGRA_8888
Not using qualcomm overlay, 'psbfb'
framebuffer: fd 4 (1280 x 800)
=> Linking mtab
=> Processing recovery.fstab
I:Processing '/config'
I:Created '/config' folder.
I:Processing '/cache'
I:Processing '/system'
I:Processing '/data'
I:Created '/sdcard' folder.
I:mount '/data/media' '/sdcard' process ended with RC=0
I:mount '/data/media/0' '/sdcard' process ended with RC=0
I:Processing '/recovery'
I:Processing '/boot'
I:Processing '/external_sd'
I:Created '/external_sd' folder.
I:Backup folder set to '/data/media/0/TWRP/BACKUPS/4300ada1bae79000'
I:Settings storage is '/data/media/0'
Updating partition details...
I:Data backup size is 1192MB, free: 8685MB.
I:Unmounting main partitions...
Partition Logs:
/config | /dev/block/mmcblk0p3 | Size: 15MB Used: 4MB Free: 11MB Backup Size: 4MB
Flags: Can_Be_Mounted Can_Be_Wiped IsPresent
Primary_Block_Device: /dev/block/mmcblk0p3
Display_Name: config
Storage_Name: config
Backup_Path: /config
Backup_Name: config
Backup_Display_Name: config
Storage_Path: /config
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/cache | /dev/block/mmcblk0p6 | Size: 344MB Used: 6MB Free: 338MB Backup Size: 6MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p6
Display_Name: Cache
Storage_Name: Cache
Backup_Path: /cache
Backup_Name: cache
Backup_Display_Name: Cache
Storage_Path: /cache
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/system | /dev/block/mmcblk0p8 | Size: 2322MB Used: 1843MB Free: 479MB Backup Size: 1843MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p8
Display_Name: System
Storage_Name: System
Backup_Path: /system
Backup_Name: system
Backup_Display_Name: System
Storage_Path: /system
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/data | /dev/block/mmcblk0p9 | Size: 26418MB Used: 1192MB Free: 8685MB Backup Size: 1192MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent Has_Data_Media Can_Encrypt_Backup Use_Userdata_Encryption Is_Storage Is_Settings_Storage
Symlink_Path: /data/media/0
Symlink_Mount_Point: /sdcard
Primary_Block_Device: /dev/block/mmcblk0p9
Length: -16384
Display_Name: Data
Storage_Name: Internal Storage
Backup_Path: /data
Backup_Name: data
Backup_Display_Name: Data
Storage_Path: /data/media/0
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/recovery | /dev/block/mmcblk0p11 | Size: 20MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p11
Display_Name: Recovery
Storage_Name: recovery
Backup_Path: /recovery
Backup_Name: recovery
Backup_Display_Name: Recovery
Storage_Path: /recovery
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/boot | /dev/block/mmcblk0p10 | Size: 20MB
Flags: Can_Be_Backed_Up IsPresent
Primary_Block_Device: /dev/block/mmcblk0p10
Display_Name: Boot
Storage_Name: boot
Backup_Path: /boot
Backup_Name: boot
Backup_Display_Name: Boot
Storage_Path: /boot
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/external_sd | /dev/block/mmcblk1p1 | Size: 3773MB Used: 674MB Free: 3098MB Backup Size: 674MB
Flags: Can_Be_Mounted Can_Be_Wiped Wipe_Available_in_GUI Removable IsPresent Is_Storage
Primary_Block_Device: /dev/block/mmcblk1p1
Alternate_Block_Device: /dev/block/mmcblk1
Display_Name: external_sd
Storage_Name: external_sd
Backup_Path: /external_sd
Backup_Name: external_sd
Backup_Display_Name: external_sd
Storage_Path: /external_sd
Current_File_System: vfat
Fstab_File_System: vfat
Backup_Method: files
I:Loading package: TWRP (/script/ui.xml)
I:Loading package: TWRP (/data/media/0/TWRP/theme/ui.zip)
I:Loading package: TWRP (/res/ui.xml)
I:Loading resources...
I:Loading variables...
I:Loading mouse cursor...
I:Loading pages...
I:PageSet::CheckInclude loading filename: ''
I:Loading included resources...
I:Loading included variables...
I:Loading mouse cursor...
I:Loading included pages...
I:Loading page main
I:Loading page main2
I:Loading page install
I:Loading page flash_confirm
I:Loading page flash_zip
I:Loading page flash_done
I:Loading page clear_vars
I:Loading page confirm_action
I:Loading page action_page
I:Loading page singleaction_page
I:Loading page action_complete
I:Loading page filecheck
I:Loading page rebootcheck
I:Loading page reboot
I:Loading page selectstorage
I:Loading page mount
I:Loading page usb_mount
I:Loading page usb_umount
I:Loading page wipe
I:Loading page advancedwipe
I:Loading page formatdata
I:Loading page formatdata_confirm
I:Loading page checkpartitionlist
I:Loading page partitionoptions
I:Loading page selectfilesystem
I:Loading page backup
I:Loading page backupname1
I:Loading page backupname2
I:Loading page backupencryption
I:Loading page backupencryption2
I:Loading page checkbackuppassword
I:Loading page backup_run
I:Loading page restore
I:Loading page restore_read
I:Loading page restore_decrypt
I:Loading page try_restore_decrypt
I:Loading page restore_select
I:Loading page renamebackup
I:Loading page restore_run
I:Loading page settings
I:Loading page timezone
I:Loading page screen
I:Loading page Vibrate
I:Loading page advanced
I:Loading page partsdcard
I:Loading page htcdumlock
I:Loading page lock
I:Loading page filemanagerlist
I:Loading page filemanageroptions
I:Loading page choosedestinationfolder
I:Loading page filemanagerrenamefile
I:Loading page filemanagerrenamefolder
I:Loading page filemanagerchmod
I:Loading page filemanagerconfirm
I:Loading page filemanageracction
I:Loading page decrypt
I:Loading page trydecrypt
I:Loading page terminalfolder
I:Loading page terminalcommand
I:Loading page sideload
I:Loading page installsu
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Switching packages (TWRP)
SELinux contexts loaded from /file_contexts
Full SELinux support is present.
E:Cannot load volume /misc!
E:Cannot load volume /misc!
Startup Commands:
g=€
g=€
g=€
g=€
ro.boot.bootmedia=sdcard
ro.boot.hardware=santos103g
ro.boot.debug_level=0x4f4c
ro.boot.revision=8
ro.boot.emmc_checksum=3
ro.boot.bootloader=P5200XXUANC1
ro.boot.serialno=4300ada1bae79000
ro.serialno=4300ada1bae79000
ro.bootmode=unknown
ro.baseband=unknown
ro.bootloader=P5200XXUANC1
ro.debug_level=0x4f4c
ro.carrier=unknown
ro.revision=8
ro.hardware=santos103g
ro.factorytest=0
ro.adb.secure=0
ro.secure=0
ro.debugabble=1
ro.allow.mock.location=0
ro.debuggable=1
persist.sys.usb.config=adb
ro.build.id=KTU84Q
ro.build.display.id=cm_santos10wifi-userdebug 4.4.4 KTU84Q e5900efb45 test-keys
ro.build.version.incremental=e5900efb45
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.4
ro.build.date=Wed Aug 6 17:45:55 EDT 2014
ro.build.date.utc=0
ro.build.type=userdebug
ro.build.user=root
ro.build.host=kali
ro.build.tags=test-keys
ro.product.brand=SGT3_Intel
ro.product.name=cm_santos10wifi
ro.product.board=santos10wifi
ro.product.cpu.abi=x86
ro.product.cpu.abi2=x86
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=clovertrail
ro.build.product=santos10wifi
ro.product.model=GT-P5210
ro.product.device=santos10wifi
ro.build.description=cm_santos10wifi-userdebug 4.4.4 KTU84Q e5900efb45 test-keys
ro.build.fingerprint=SGT3_Intel/cm_santos10wifi/santos10wifi:4.4.4/KTU84Q/e5900efb45:userdebug/test-keys
ro.build.characteristics=tablet
ro.cm.device=santos10wifi
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/ttyS0
ril.OTPAuth=true
ro.lcd_brightness=118
ro.sf.lcd_density=160
panel.physicalWidthmm=217
panel.physicalHeightmm=136
ro.opengles.version=131072
ro.lcd_min_brightness=10
ro.mds.enable=true
ro.kernel.qemu=0
ro.rommanager.developerid=cyanogenmod
ro.com.google.clientidbase=android-google
keyguard.no_require_sim=true
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.build.selinux=1
persist.sys.dun.override=0
persist.sys.root_access=1
ro.cm.version=11-20140806-UNOFFICIAL-santos10wifi
ro.cm.releasetype=UNOFFICIAL
ro.modversion=11-20140806-UNOFFICIAL-santos10wifi
ro.cmlegal.url=http://www.cyanogenmod.org/docs/privacy
persist.sys.recovery_update=false
ro.cm.display.version=11-20140806-UNOFFICIAL-santos10wifi
ro.config.notification_sound=Argon.ogg
ro.config.alarm_alert=Hassium.ogg
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=384m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
mobiledata.interfaces=rmnet0,pdp0,wlan0,gprs,ppp0
ro.telephony.call_ring.multiple=false
ro.telephony.call_ring.delay=3000
ro.boot.selinux=disabled
persist.sys.dalvik.vm.lib=libdvm.so
dalvik.vm.lockprof.threshold=500
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
init.svc.ueventd=running
init.svc.healthd=running
I:Backing up TWRP ramdisk...
-- InjectTWRP Recovery Ramdisk Injection Tool for Samsung devices. --
-- by Dees_Troy and Team Win --
-- [url]http://teamw.in[/url] --
-- Bringing some win to Samsung! --
-- This tool comes with no warranties whatsoever! --
-- Use at your own risk and always keep a backup! --
Version 0.2 beta
Dumping boot image...
This is not a properly formatted Samsung boot image!
Failed
I:injecttwrp --backup /tmp/backup_recovery_ramdisk.img bd=/dev/block/mmcblk0p10 process ended with ERROR=1
I:Backup of TWRP ramdisk done.
I:Copying file /cache/recovery/log to /cache/recovery/last_log
I:Attempt to load settings from settings file...
I:Loading settings from '/data/media/0/TWRP/.twrps'.
I:Backup folder set to '/data/media/0/TWRP/BACKUPS/4300ada1bae79000'
I:Copying file /etc/recovery.fstab to /cache/recovery/recovery.fstab
I:Version number saved to '/cache/recovery/.version'
__bionic_open_tzdata: couldn't find any tzdata when looking for CST6CDT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
I:Switching packages (TWRP)
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'flash_zip'
I:Set page: 'flash_zip'
Installing '/sdcard/Roms/SlimSammy.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip does not contain SELinux file_contexts file in its root.
I:Legacy property environment initialized.
line 26 col 42: syntax error, unexpected BAD
1 parse errors
E:Error executing updater binary in zip '/sdcard/Roms/SlimSammy.zip'
Error flashing zip '/sdcard/Roms/SlimSammy.zip'
Injecting TWRP into boot image...
-- InjectTWRP Recovery Ramdisk Injection Tool for Samsung devices. --
-- by Dees_Troy and Team Win --
-- [url]http://teamw.in[/url] --
-- Bringing some win to Samsung! --
-- This tool comes with no warranties whatsoever! --
-- Use at your own risk and always keep a backup! --
Version 0.2 beta
Dumping boot image...
This is not a properly formatted Samsung boot image!
Failed
I:injecttwrp --dump /tmp/backup_recovery_ramdisk.img /tmp/injected_boot.img --flash bd=/dev/block/mmcblk0p10 process ended with ERROR=1
TWRP injection complete.
Updating partition details...
I:Data backup size is 1192MB, free: 8685MB.
I:Set page: 'flash_done'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'flash_zip'
I:Set page: 'flash_zip'
Installing '/sdcard/Roms/SlimSammy.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip does not contain SELinux file_contexts file in its root.
I:Legacy property environment initialized.
line 26 col 42: syntax error, unexpected BAD
1 parse errors
E:Error executing updater binary in zip '/sdcard/Roms/SlimSammy.zip'
Error flashing zip '/sdcard/Roms/SlimSammy.zip'
Injecting TWRP into boot image...
-- InjectTWRP Recovery Ramdisk Injection Tool for Samsung devices. --
-- by Dees_Troy and Team Win --
-- [url]http://teamw.in[/url] --
-- Bringing some win to Samsung! --
-- This tool comes with no warranties whatsoever! --
-- Use at your own risk and always keep a backup! --
Version 0.2 beta
Dumping boot image...
This is not a properly formatted Samsung boot image!
Failed
I:injecttwrp --dump /tmp/backup_recovery_ramdisk.img /tmp/injected_boot.img --flash bd=/dev/block/mmcblk0p10 process ended with ERROR=1
TWRP injection complete.
Updating partition details...
I:Data backup size is 1192MB, free: 8685MB.
I:Set page: 'flash_done'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'settings'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
I:Copying file /tmp/recovery.log to /data/media/0/recovery.log
Q&A for [RECOVERY][m8] TWRP 2.8.1.0 touch recovery [2014-10-29]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][m8] TWRP 2.8.1.0 touch recovery [2014-10-29]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
htc one m8 ul_ca
Will this version work on my htc one m8 ul_ca? Attempted root with twrp 2.7.0.2 using the all in one toolkit from Hasoon however the recovery was never properly flashed. the screen stalled at download and did nothing. I rebooted and everything was fine but no idea as to what the problem is.
ShinAkira00 said:
Will this version work on my htc one m8 ul_ca? Attempted root with twrp 2.7.0.2 using the all in one toolkit from Hasoon however the recovery was never properly flashed. the screen stalled at download and did nothing. I rebooted and everything was fine but no idea as to what the problem is.
Click to expand...
Click to collapse
Yes.
xunholyx said:
Yes.
Click to expand...
Click to collapse
Thanks but any ideas why i may be getting this error "FAILED (status read failed (Too many links)" when attempting root?
ShinAkira00 said:
Thanks but any ideas why i may be getting this error "FAILED (status read failed (Too many links)" when attempting root?
Click to expand...
Click to collapse
Go here.
This is the way I did root on my M8.
Getting an error when trying to do an ordinary nandroid backup to my external 64gb sdcard.
Unable to create folder /sdcard2/TWRP/BACKUPS
The external sd card mounts just fine - in fact I created the folder myself to just see what would happen and still got the error. Any ideas?
I can't able to download Twrp 2.8.1.0 my download is not connecting at 99.9%
It will be helpful if anyone give me alternative link please!
Thank you
2.8.1 E:Resource type (font) failed to load....
hi ther
so, long story short. i updated my firmware using the methods from http://forum.xda-developers.com/htc-...uu-m8-t2813792 to 3.28.401.9 and it was succesful. flashed twrp 2.8.1 and then installed latest android revolution rom via twrp which says its succesful but i'm getting a "E:Resource type (font) failed to load error 3 times in a row and my rom won't boot. i'm thinking they are related maybe? below isthe contents of the recovery log file. please let me know what i need to do here.
thanks
__bionic_open_tzdata: couldn't find any tzdata when looking for localtime!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
Starting TWRP 2.8.1.0 on Wed Jan 1 08:43:34 2014
TW_INCLUDE_DUMLOCK := true
RECOVERY_SDCARD_ON_DATA := true
I:Lun file '/sys/devices/msm_dwc3/f9200000.dwc3/gadget/lun0/file'
I:Found brightness file at '/sys/class/leds/lcd-backlight/brightness'
I:TWFunc::Set_Brightness: Setting brightness control to 255
Starting the UI...Pixel format: 1080x1920 @ 32bpp
Pixel format: RGBX_8888
Not using qualcomm overlay, 'mdssfb_90000'
framebuffer: fd 4 (1080 x 1920)
minui: /sys/board_properties/virtualkeys.synaptics-rmi-touchscreen is 5 % 6
=> Linking mtab
=> Processing recovery.fstab
Irocessing '/misc'
Irocessing '/boot'
Irocessing '/cache'
Irocessing '/system'
Irocessing '/data'
I:Setting up '/data' as data/media emulated storage.
I:Created '/sdcard' folder.
I:mount '/data/media' '/sdcard' process ended with RC=0
Irocessing '/devlog'
I:Created '/devlog' folder.
Irocessing '/external_sd'
I:Created '/external_sd' folder.
Irocessing '/sd-ext'
I:Created '/sd-ext' folder.
Irocessing '/usb_otg'
I:Created '/usb_otg' folder.
I:Created '/and-sec' folder.
I:Creating Android Secure: /external_sd/.android_secure
I:cmd: /sbin/exfat-fuse -o big_writes,max_read=131072,max_write=131072 /dev/block/mmcblk1p1 /external_sd
__bionic_open_tzdata: couldn't find any tzdata when looking for localtime!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
WARN: volume was not unmounted cleanly.
I:mount '/external_sd/.android_secure' '/and-sec' process ended with RC=0
I:Backup folder set to '/data/media/TWRP/BACKUPS/SH442WM10676'
I:Settings storage is '/data/media'
Updating partition details...
Iata backup size is 205MB, free: 25198MB.
I:Unable to mount '/sd-ext'
I:Actual block device: '', current file system: 'ext4'
I:Unable to mount '/usb_otg'
I:Actual block device: '', current file system: 'vfat'
I:Unmounting main partitions...
Partition Logs:
/misc | /dev/block/mmcblk0p24 | Size: 1MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p24
Display_Name: misc
Storage_Name: misc
Backup_Path: /misc
Backup_Name: misc
Backup_Display_Name: misc
Storage_Path: /misc
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/boot | /dev/block/mmcblk0p42 | Size: 16MB
Flags: Can_Be_Backed_Up IsPresent
Primary_Block_Device: /dev/block/mmcblk0p42
Display_Name: Boot
Storage_Name: boot
Backup_Path: /boot
Backup_Name: boot
Backup_Display_Name: Boot
Storage_Path: /boot
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/cache | /dev/block/mmcblk0p46 | Size: 678MB Used: 10MB Free: 667MB Backup Size: 10MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p46
Display_Name: Cache
Storage_Name: Cache
Backup_Path: /cache
Backup_Name: cache
Backup_Display_Name: Cache
Storage_Path: /cache
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/system | /dev/block/mmcblk0p45 | Size: 1020MB Used: 1020MB Free: 0MB Backup Size: 1020MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p45
Display_Name: System
Storage_Name: System
Backup_Path: /system
Backup_Name: system
Backup_Display_Name: System
Storage_Path: /system
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/data | /dev/block/mmcblk0p47 | Size: 25532MB Used: 205MB Free: 25198MB Backup Size: 205MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent Has_Data_Media Can_Encrypt_Backup Use_Userdata_Encryption Is_Storage Is_Settings_Storage
Symlink_Path: /data/media
Symlink_Mount_Point: /sdcard
Primary_Block_Device: /dev/block/mmcblk0p47
Display_Name: Data
Storage_Name: Internal Storage
Backup_Path: /data
Backup_Name: data
Backup_Display_Name: Data
Storage_Path: /data/media
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/devlog | /dev/block/mmcblk0p39 | Size: 29MB Used: 25MB Free: 4MB Backup Size: 25MB
Flags: Can_Be_Mounted Can_Be_Wiped IsPresent
Primary_Block_Device: /dev/block/mmcblk0p39
Display_Name: devlog
Storage_Name: devlog
Backup_Path: /devlog
Backup_Name: devlog
Backup_Display_Name: devlog
Storage_Path: /devlog
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/external_sd | /dev/block/mmcblk1p1 | Size: 60890MB Used: 21138MB Free: 39752MB Backup Size: 480MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI Removable IsPresent Has_Android_Secure Is_Storage
Symlink_Path: /external_sd/.android_secure
Symlink_Mount_Point: /and-sec
Primary_Block_Device: /dev/block/mmcblk1p1
Alternate_Block_Device: /dev/block/mmcblk1
Display_Name: Micro SDcard
Storage_Name: Micro SDcard
Backup_Path: /and-sec
Backup_Name: and-sec
Backup_Display_Name: Android Secure
Storage_Path: /external_sd
Current_File_System: exfat
Fstab_File_System: vfat
Backup_Method: files
/sd-ext | | Size: 0MB Used: 0MB Free: 0MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI Removable Can_Encrypt_Backup Use_Userdata_Encryption
Primary_Block_Device: /dev/block/mmcblk1p2
Display_Name: SD-Ext
Storage_Name: SD-Ext
Backup_Path: /sd-ext
Backup_Name: sd-ext
Backup_Display_Name: SD-Ext
Storage_Path: /sd-ext
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/usb_otg | | Size: 0MB Used: 0MB Free: 0MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Wipe_Available_in_GUI Removable Is_Storage
Primary_Block_Device: /dev/block/sda1
Alternate_Block_Device: /dev/block/sda
Display_Name: USB-OTG
Storage_Name: USB-OTG
Backup_Path: /usb_otg
Backup_Name: usb_otg
Backup_Display_Name: USB-OTG
Storage_Path: /usb_otg
Current_File_System: vfat
Fstab_File_System: vfat
Backup_Method: files
I:Loading package: TWRP (/script/ui.xml)
I:Loading package: TWRP (/data/media/TWRP/theme/ui.zip)
I:Loading package: TWRP (/res/ui.xml)
I:Loading resources...
E:Resource type (font) failed to load
E:Resource type (font) failed to load
E:Resource type (font) failed to load
I:Loading variables...
I:Loading mouse cursor...
I:Loading pages...
I:Loading page main
I:Loading page main2
I:Loading page install
I:Loading page flash_confirm
I:Loading page flash_zip
I:Loading page flash_done
I:Loading page clear_vars
I:Loading page confirm_action
I:Loading page action_page
I:Loading page singleaction_page
I:Loading page action_complete
I:Loading page filecheck
I:Loading page rebootcheck
I:Loading page wipe
I:Loading page advancedwipe
I:Loading page formatdata
I:Loading page formatdata_confirm
I:Loading page checkpartitionlist
I:Loading page partitionoptions
I:Loading page refreshfilesystem
I:Loading page selectfilesystem
I:Loading page backup
I:Loading page backupname1
I:Loading page backupname2
I:Loading page backupencryption
I:Loading page backupencryption2
I:Loading page checkbackuppassword
I:Loading page backup_run
I:Loading page restore
I:Unable to open '/data/media/TWRP/BACKUPS/SH442WM10676'
I:Loading page restore_read
I:Loading page restore_decrypt
I:Loading page try_restore_decrypt
I:Loading page restore_select
I:Loading page renamebackup
I:Loading page restore_run
I:Loading page selectstorage
I:Loading page mount
I:Loading page usb_mount
I:Loading page usb_umount
I:Loading page reboot
I:Loading page settings
I:Loading page timezone
I:Loading page screen
I:Loading page Vibrate
I:Loading page advanced
I:Loading page partsdcard
I:Loading page htcdumlock
I:Loading page lock
I:Loading page filemanagerlist
I:Loading page filemanageroptions
I:Loading page choosedestinationfolder
I:Loading page filemanagerrenamefile
I:Loading page filemanagerrenamefolder
I:Loading page filemanagerchmod
I:Loading page filemanagerconfirm
I:Loading page filemanageracction
I:Loading page decrypt
I:Loading page trydecrypt
I:Loading page terminalfolder
I:Loading page terminalcommand
I:Loading page sideload
I:Loading page installsu
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Switching packages (TWRP)
SELinux contexts loaded from /file_contexts
Full SELinux support is present.
Startup Commands:
ro.com.google.clientidbase=android-google
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=true
ro.com.android.wifi-watchlist=GoogleGuest
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.boot.dq=PASS
ro.boot.lb=1
ro.boot.cid=11111111
ro.boot.mid=0P6B17000
ro.boot.emmc=true
ro.boot.mode=recovery
ro.boot.podt=0x3E8
ro.boot.ddrmid=(0x1)
ro.boot.carrier=ALL
ro.boot.keycaps=qwerty
ro.boot.baseband=1.22.21331147A1.29G
ro.boot.hardware=qcom
ro.boot.pagesize=2048
ro.boot.rom_type=NORMAL
ro.boot.serialno=SH442WM10676
ro.boot.devicerev=5
ro.boot.bootloader=3.19.0.0000
ro.boot.efuse_info=FL
ro.boot.batt_poweron=good_battery
ro.emmc=0
ro.hwui.path_cache_size=24
ro.hwui.layer_cache_size=32
ro.hwui.texture_cache_size=48
ro.hwui.gradient_cache_size=1
ro.hwui.r_buffer_cache_size=4
ro.hwui.drop_shadow_cache_size=5
ro.hwui.text_large_cache_width=2048
ro.hwui.text_small_cache_width=1024
ro.hwui.text_large_cache_height=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.texture_cache_flushrate=0.5
ro.omni.device=m8
ro.omni.version=4.4.4-20141023-m8-HOMEMADE
ro.twrp.boot=1
ro.twrp.version=2.8.1.0
ro.wifi.channels=
ro.allow.mock.location=1
ro.board.platform=msm8974
ro.build.id=KTU84P
ro.build.date=Thu Oct 23 03:17:55 UTC 2014
ro.build.date.utc=0
ro.build.host=ded1.ktechnology.net
ro.build.tags=test-keys
ro.build.type=eng
ro.build.user=dees_troy
ro.build.display.id=omni_m8-eng 4.4.4 KTU84P 4ef4c299f5 test-keys
ro.build.product=m8
ro.build.version.sdk=19
ro.build.version.release=4.4.4
ro.build.version.codename=REL
ro.build.version.incremental=4ef4c299f5
ro.build.description=1.54.401.5 CL325784 release-keys
ro.build.fingerprint=htc/htc_europe/htc_m8:4.4.2/KOT49H/325784.5:user/release-keys
ro.build.characteristics=default
ro.config.ringtone=Orion.ogg
ro.config.alarm_alert=Argon.ogg
ro.config.notification_sound=pixiedust.ogg
ro.kernel.android.checkjni=1
ro.secure=0
ro.carrier=unknown
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.board=MSM8974
ro.product.brand=htc
ro.product.model=HTC One_M8
ro.product.device=m8
ro.product.locale.region=US
ro.product.locale.language=en
ro.product.manufacturer=htc
ro.baseband=1.22.21331147A1.29G
ro.bootmode=recovery
ro.hardware=qcom
ro.revision=0
ro.serialno=SH442WM10676
ro.9kramdump=0
ro.telephony.default_network=9
ro.bootloader=3.19.0.0000
ro.debuggable=1
ro.modversion=OmniROM-4.4.4-20141023-m8-HOMEMADE
ro.factorytest=0
ro.setupwizard.enterprise_mode=1
net.bt.name=Android
net.change=net.bt.name
init.svc.adbd=running
init.svc.healthd=running
init.svc.ueventd=running
init.svc.recovery=running
init.svc.chargeled=running
init.svc.choice_fn=stopped
twrp.crash_counter=0
dalvik.vm.heapsize=512m
dalvik.vm.heapmaxfree=8m
dalvik.vm.heapminfree=2m
dalvik.vm.heapstartsize=16m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.heaptargetutilization=0.75
persist.sys.usb.config=adb
persist.sys.dalvik.vm.lib=libdvm.so
persist.sys.root_access=1
service.adb.root=1
keyguard.no_require_sim=true
telephony.lteOnGsmDevice=1
I:Copying file /cache/recovery/log to /cache/recovery/last_log
I:Attempt to load settings from settings file...
I:Loading settings from '/data/media/TWRP/.twrps'.
I:Backup folder set to '/external_sd/TWRP/BACKUPS/SH442WM10676'
I:Copying file /etc/recovery.fstab to /cache/recovery/recovery.fstab
I:Version number saved to '/cache/recovery/.version'
I:Unable to mount '/usb_otg'
I:Actual block device: '', current file system: 'vfat'
__bionic_open_tzdata: couldn't find any tzdata when looking for CST6CDT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
I:TWFunc::Set_Brightness: Setting brightness control to 255
I:TWFunc::Fixup_Time: Pre-fix date and time: 2014-01-01--02-43-36
I:TWFunc::Fixup_Time: Setting time offset from file /sys/class/rtc/rtc0/since_epoch
I:TWFunc::Fixup_Time: will attempt to use the ats files now.
I:TWFunc::Fixup_Time: no ats files found, leaving untouched!
I:Enabling MTP during startup
I:Starting MTP
I:Cannot find file /sys/class/android_usb/android0/idVendor
I:Cannot find file /sys/class/android_usb/android0/idProduct
twrp addStorage /data/media, mtpstorageid: 65537
twrp addStorage /external_sd, mtpstorageid: 65538
Starting MTP
MTP Enabled
created new mtpserver object
adding internal storage
I:Switching packages (TWRP)
MtpStorage id: 65537 path: /data/media
I:Starting command line thread
E:inotify_add_watch failed: Bad file number
MtpStorage id: 65538 path: /external_sd
MtpServer::run fd: 16
I:TWFunc::Set_Brightness: Setting brightness control to 5
I:TWFunc::Set_Brightness: Setting brightness control to 0
I:TWFunc::Set_Brightness: Setting brightness control to 255
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
I:Copying file /tmp/recovery.log to /external_sd/recovery.log
Can recovery be flashed via 0p6bimg method? I don't have access to my laptop
muppetmaster916 said:
Can recovery be flashed via 0p6bimg method? I don't have access to my laptop
Click to expand...
Click to collapse
If it's a zip file, yes.
Magnum_Enforcer said:
If it's a zip file, yes.
Click to expand...
Click to collapse
Where would I go about finding a recovery.zip rather than the .img that they typically are.
muppetmaster916 said:
Where would I go about finding a recovery.zip rather than the .img that they typically are.
Click to expand...
Click to collapse
Take a look in the link below. Just fyi, using Flashify from the Play store works, too. It allows flashing of zip & img files.
http://themikmik.com/showthread.php...OM-TWRP-Recovery-v2-8-3-standard-TWRP-2-8-3-0
TWRP 2.8.4.0 won't boot.
I've tried to install 2.8.4.0 about a dozen times. Checked the md5. When booting it always stops at the white HTC boot screen. Same with 2.8.3.0.
The latest version I can get to install and actually boot is 2.8.1.0.
Any ideas?
Thanks,
Mike
version: 0.5
version-bootloader: 3.16.0.0000
version-baseband: 1.16.21331931.LA11G
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-OFF
serialno:
imei:
imei2: Not Support
meid: 00000000000000
product: m8_ul_ca
platform: hTCBmsm8974
modelid: 0P6B12000
cidnum: 11111111
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: c3d94491
hbootpreupdate: 11
gencheckpt: 0
jmb6420 said:
I've tried to install 2.8.4.0 about a dozen times. Checked the md5. When booting it always stops at the white HTC boot screen. Same with 2.8.3.0.
The latest version I can get to install and actually boot is 2.8.1.0.
Any ideas?
Thanks,
Mike
version: 0.5
version-bootloader: 3.16.0.0000
version-baseband: 1.16.21331931.LA11G
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-OFF
serialno:
imei:
imei2: Not Support
meid: 00000000000000
product: m8_ul_ca
platform: hTCBmsm8974
modelid: 0P6B12000
cidnum: 11111111
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: c3d94491
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
You need to update your firmware. Your bootloader is too old for the newer recovery version.
xunholyx said:
You need to update your firmware. Your bootloader is too old for the newer recovery version.
Click to expand...
Click to collapse
Thank you. I thought I had to install 2.8.4.0 PRIOR to updating my firmware. Makes sense now.
TWRP Issue
I was wondering if anyone could help me out with this problem I have been having. I recently bought an HTC One M8 from AT&T. I unlocked the boot loader through a Sunshine license I already owned. Anytime I flash TWRP after 2.8.1.0, the phone hangs on the HTC screen with the purple texts that says, "Entering Recovery....". I have tried everything I can think of. Any help would be greatly appreciated! Thank you in advance!
EDIT: I apologize, I believe I may have the old bootloader firmware issue, I will try to update the firmware and see if that fixes my issue.
slimkat and carbon 4.4.4 r2 problem gt-p6200 plus
Plus GT-P6200
a bluetooth connection is good but breaking speech
my bluetooth Plantronics | Voyager Legend
one bass and one-off does not work
bluetooth breaks and sometimes we need to reboot.
but it will not restart unless gsm
TWRP backups restoring, but lots of errors in apps.
OK... I'm at a loss. I've Googled and I've read this entire thread and can't find a solution.
I have a T-mobile HTC One M8 and here are the steps I've taken.
Using fastboot, I flash the t-mobile stock recovery onto the phone, lock the bootloader, then boot into fastboot and run the latest T-mobile RUU to completely restore the phone to stock.
I boot, run through the setup and then shutdown the phone. I boot into fastboot, unlock the bootloader (using fastboot) and flash the 2.8.5.0 TWRP recovery onto the device. After I do this, I reboot the phone and it goes through all of the setup steps again, as if I hadn't done it the first time. After running through setup, I shut down the phone and boot into recovery.
I perform a backup of system, data and boot and have it saved to the SD card. After it complete's successfully, I reboot the device and confirm that everything is working correctly.
Shutdown, boot to recovery and I then use the default wipe. Then I restore the backup I just made of the stock ROM. After the restore completes successfully, I reboot the device and after it boots up, I get a "Unfortunately, System UI has stopped working." and after tapping OK, nothing works. If I click the app drawer, it comes up but the dock at the bottom disappears and doesn't come back. Apps don't work.
I've also tried it with the Viper One ROM. Same steps as above, except I install the ROM, boot into the ROM, complete setup, and then back it up from recovery. After restoring I get various errors and apps are unable to function correctly.
Any ideas?
Thanks in advance for any help!
After installation of twrp-2.8.6.0-m8.img, I am not able to enter the recovery any more
Tested with installation through TWRP (v2.8.5) and via fastboot. This issue is reproducible.
Anyone experiencing the same issue?
MarioBrosN5 said:
After installation of twrp-2.8.6.0-m8.img, I am not able to enter the recovery any more
Tested with installation through TWRP (v2.8.5) and via fastboot. This issue is reproducible.
Anyone experiencing the same issue?
Click to expand...
Click to collapse
Any kind of response will be really appreciated. If it is necessary I can provide any kind of log files.
Thx in advance for your assistance.
Hi,
this tutorial is an translation from german. Al credits to x.wolverine.x from Android Hilfe.
prerequisite:
1.) activate developer options
2.) enable Bootloader-Unlock
3.) download and install ADB und fastboot (minimal adb & fastboot)
4.) latest usb driver (Support - Aquaris X5 Plus <== Drivers, Drivers & Tools)
5.) download TWRP BQ Aquaris X5 Plus (gohan)
6.) download SuperSu
Let's do it (You do everything at your own risk!):
1.) boot to fastboot -> shutdown your device -> press on/off + "-" Volumekey -> device restarts to white screen fastboot mode
2.) connect to your pc via usb cable
3.) start command shell and check for phone
"fastboot devices"
4.) do the unlocking -> Attention: unlocking the bootloader does a full-wipe!!!
"fastboot oem unlock-go"
5.) boot TWRP
"fastboot boot twrp-3.0.2-0-gohan.img"
alternative flash permanent
"fastboot flash recovery twrp-3.0.2-0-gohan.img" <- I did this finally, but for root only temp boot is enough.
6.) flash SuperSu with TWRP
Bye
Ping_2000
Hi, i tried that and actually all these steps seem to go well. But after that i kind of bricked my phone.
Googling for hours brought it back via sudo fastboot flash recovery recovery.img
Im in desperate need of working firmware now ))
download lineageos org/paella >> is only for x5 not x5 plus
BQ seems not to have release a firmware online, the flashtool does not work as it complains that the phone is locked,
sudo fastboot oem unlock-go
...
OKAY [ 0.000s]
finished. total time: 0.000s
but no effect (((
fastboot oem device-info
sudo fastboot oem device-info
...
(bootloader) Device tampered: false
(bootloader) Device unlocked: true
(bootloader) Device critical unlocked: false
(bootloader) Charger screen enabled: true
(bootloader) Display panel:
OKAY [ 0.005s]
finished. total time: 0.005s
the firmware at shenron bq com/ otas/ 2016/SM...8976_gohan__user_-_20170109-134157_update.zip does not get installed, it gives an error
so does storage googleapis com /otas...BQ/1.6.0_20161229-1655-gohan-user-1047-FW zip
---------- Post added at 07:21 PM ---------- Previous post was at 06:50 PM ----------
Starting TWRP 3.0.2-1-f3c1b2f5-dirty on Thu Jan 1 05:15:59 1970
(pid 339)
RECOVERY_SDCARD_ON_DATA := true
I:Lun file '/sys/devices/platform/msm_hsusb/gadget/lun0/file'
TW_INCLUDE_CRYPTO := true
I:Found brightness file at '/sys/class/leds/lcd-backlight/brightness'
I:Got max brightness 255 from '/sys/class/leds/lcd-backlight/max_brightness'
I:TWFunc::Set_Brightness: Setting brightness control to 128
I:LANG: en
Starting the UI...
Overlay graphics may work (mdssfb_90000), but not enabled. Use TW_TARGET_USES_QCOM_BSP := true to enable.
setting DRM_FORMAT_RGBX8888 and GGL_PIXEL_FORMAT_RGBX_8888
cannot find/open a drm device: No such file or directory
fb0 reports (possibly inaccurate):
vi.bits_per_pixel = 32
vi.red.offset = 0 .length = 8
vi.green.offset = 8 .length = 8
vi.blue.offset = 16 .length = 8
setting GGL_PIXEL_FORMAT_RGBA_8888
double buffered
framebuffer: 0 (1080 x 1920)
Using fbdev graphics.
I:TWFunc::Set_Brightness: Setting brightness control to 128
I:Loading package: splash (/twres/splash.xml)
I:Load XML directly
IageManager::LoadFileToBuffer loading filename: '/twres/splash.xml' directly
I:Checking resolution...
I:Loading resources...
I:Loading variables...
I:Loading mouse cursor...
I:Loading pages...
I:Loading page splash
I:Switching packages (splash)
blacklisting hbtp_vm input device
=> Linking mtab
Moving /etc/twrp.fstab -> /etc/recovery.fstab
=> Processing recovery.fstab
Irocessing '/cache'
Irocessing '/system'
Irocessing '/system_image'
Irocessing '/data'
Irocessing '/boot'
Irocessing '/recovery'
Irocessing '/misc'
Irocessing '/external_sd'
I:Created '/external_sd' folder.
Irocessing '/usb-otg'
I:Created '/usb-otg' folder.
I:Setting up '/data' as data/media emulated storage.
I:Created '/sdcard' folder.
I:Setting up '/data' as data/media emulated storage.
I:Recreating /data/media folder.
I:mount -o bind '/data/media' '/sdcard' process ended with RC=0
I:Backup folder set to '/data/media/TWRP/BACKUPS/XH035792'
I:Settings storage is '/data/media'
Iecrypt adopted storage starting
IageManager::LoadFileToBuffer loading filename: '/data/system/storage.xml' directly
Updating partition details...
Failed to mount '/system' (Invalid argument)
I:Actual block device: '/dev/block/mmcblk0p24', current file system: 'ext4'
Iata backup size is 0MB, free: 6614MB.
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
...done
I:Unmounting main partitions...
Partition Logs:
/cache | /dev/block/mmcblk0p25 | Size: 247MB Used: 0MB Free: 247MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p25
Display_Name: Cache
Storage_Name: Cache
Backup_Path: /cache
Backup_Name: cache
Backup_Display_Name: Cache
Storage_Path: /cache
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/system | /dev/block/mmcblk0p24 | Size: 0MB Used: 0MB Free: 0MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p24
Display_Name: System
Storage_Name: System
Backup_Path: /system
Backup_Name: system
Backup_Display_Name: System
Storage_Path: /system
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/system_image | /dev/block/mmcblk0p24 | Size: 2560MB
Flags: Can_Be_Backed_Up IsPresent Can_Flash_Img
Primary_Block_Device: /dev/block/mmcblk0p24
Display_Name: System Image
Storage_Name: system_image
Backup_Path: /system_image
Backup_Name: system_image
Backup_Display_Name: System Image
Storage_Path: /system_image
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/data | /dev/block/mmcblk0p46 | Size: 6629MB Used: 0MB Free: 6614MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent Can_Be_Encrypted Has_Data_Media Can_Encrypt_Backup Use_Userdata_Encryption Is_Storage Is_Settings_Storage
Symlink_Path: /data/media
Symlink_Mount_Point: /sdcard
Primary_Block_Device: /dev/block/mmcblk0p46
Length: -16384
Display_Name: Data
Storage_Name: Internal Storage
Backup_Path: /data
Backup_Name: data
Backup_Display_Name: Data
Storage_Path: /data/media
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
MTP_Storage_ID: 65537
/boot | /dev/block/mmcblk0p21 | Size: 64MB
Flags: Can_Be_Backed_Up IsPresent Can_Flash_Img
Primary_Block_Device: /dev/block/mmcblk0p21
Display_Name: Boot
Storage_Name: boot
Backup_Path: /boot
Backup_Name: boot
Backup_Display_Name: Boot
Storage_Path: /boot
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/recovery | /dev/block/mmcblk0p22 | Size: 64MB
Flags: IsPresent Can_Flash_Img
Primary_Block_Device: /dev/block/mmcblk0p22
Display_Name: Recovery
Storage_Name: recovery
Backup_Path: /recovery
Backup_Name: recovery
Backup_Display_Name: Recovery
Storage_Path: /recovery
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/misc | /dev/block/mmcblk0p27 | Size: 1MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p27
Display_Name: misc
Storage_Name: misc
Backup_Path: /misc
Backup_Name: misc
Backup_Display_Name: misc
Storage_Path: /misc
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/external_sd | /dev/block/mmcblk1p1 | Size: 59672MB Used: 1584MB Free: 58087MB Backup Size: 1584MB
Flags: Can_Be_Mounted Can_Be_Wiped Wipe_Available_in_GUI Removable IsPresent Is_Storage
Primary_Block_Device: /dev/block/mmcblk1p1
Alternate_Block_Device: /dev/block/mmcblk1
Display_Name: External SD
Storage_Name: External SD
Backup_Path: /external_sd
Backup_Name: external_sd
Backup_Display_Name: External SD
Storage_Path: /external_sd
Current_File_System: vfat
Fstab_File_System: vfat
Backup_Method: files
MTP_Storage_ID: 65538
/usb-otg | | Size: 0MB Used: 0MB Free: 0MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Wipe_Available_in_GUI Removable Is_Storage
Primary_Block_Device: /dev/block/sda1
Alternate_Block_Device: /dev/block/sda
Display_Name: USB OTG
Storage_Name: USB OTG
Backup_Path: /usb-otg
Backup_Name: usb-otg
Backup_Display_Name: USB OTG
Storage_Path: /usb-otg
Current_File_System: vfat
Fstab_File_System: vfat
Backup_Method: files
MTP_Storage_ID: 65539
I:Loading package: TWRP (/data/media/TWRP/theme/ui.zip)
I:Loading zip theme
I:Loading package: TWRP (/twres/ui.xml)
I:Load XML directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/uk.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/tr.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/sv.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/sl.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/sk.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/ru.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/pt_BR.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/pl.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/nl.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/it.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/hu.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/fr.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/es.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/en.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/el.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/de.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/cz.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/en.xml' directly
parsing languageFile
parsing languageFile done
IageManager::LoadFileToBuffer loading filename: '/twres/ui.xml' directly
I:Checking resolution...
I:Loading resources...
I:Failed to load image from indeterminate013, error -1
I:Loading variables...
I:Loading mouse cursor...
I:Loading pages...
I:Including file: /twres/portrait.xml...
IageManager::LoadFileToBuffer loading filename: '/twres/portrait.xml' directly
I:Loading resources...
I:Loading variables...
I:Loading mouse cursor...
I:Loading pages...
I:Loading page main
I:Loading page main2
I:Loading page install
I:Loading page flash_confirm
I:Loading page flash_zip
I:Loading page flash_done
I:Loading page flash_sleep_and_reboot
I:Loading page flashimage_confirm
I:Loading page clear_vars
I:Loading page reboot_system_routine
I:Loading page confirm_action
I:Loading page action_page
I:Loading page singleaction_page
I:Loading page action_complete
I:Loading page filecheck
I:Loading page rebootcheck
I:Loading page wipe
I:Loading page advancedwipe
I:Loading page formatdata
I:Loading page formatdata_confirm
I:Loading page checkpartitionlist
I:Loading page partitionoptions
I:Loading page refreshfilesystem
I:Loading page selectfilesystem
I:Loading page backup
I:Loading page backup_options
I:Loading page backupname1
I:Loading page backupname2
I:Loading page backupencryption
I:Loading page backupencryption2
I:Loading page checkbackuppassword
I:Loading page backup_run
I:Loading page restore
I:Unable to open '/data/media/TWRP/BACKUPS/XH035792'
I:Loading page restore_read
I:Loading page restore_decrypt
I:Loading page try_restore_decrypt
I:Loading page restore_select
I:Loading page renamebackup
I:Loading page restore_run
I:Loading page mount
I:Loading page usb_mount
I:Loading page usb_umount
I:Loading page system_readonly_check
I:Loading page reboot
I:Loading page system_readonly
I:Loading page settings
I:Loading page settings_timezone
I:Loading page settings_screen
I:Loading page settings_vibration
I:Loading page settings_language
I:Loading page advanced
I:Loading page partsdcardsel
I:Loading page partsdcardcheck
I:Loading page partsdcard
I:Loading page htcdumlock
I:Loading page lock
I:Loading page filemanagerlist
I:Loading page filemanageroptions
I:Loading page choosedestinationfolder
I:Loading page filemanagerrenamefile
I:Loading page filemanagerrenamefolder
I:Loading page filemanagerchmod
I:Loading page filemanagerconfirm
I:Loading page filemanageraction
I:Loading page decrypt
I:Loading page decrypt_pattern
I:Loading page trydecrypt
I:Loading page terminalcommand
I:Loading page sideload
I:Loading page fixcontexts
I:Loading page installsu
I:Loading page slideout
I:Loading page select_storage
I:Loading page select_language
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Switching packages (TWRP)
SELinux contexts loaded from /file_contexts
Full SELinux support is present.
Startup Commands:
ro.boot.emmc=true
ro.boot.console=ttyHSL0
ro.boot.baseband=msm
ro.boot.hardware=qcom
ro.boot.serialno=XH035792
ro.boot.keymaster=1
ro.boot.bootdevice=7824900.sdhci
ro.boot.veritymode=enforcing
ro.boot.verifiedbootstate=orange
ro.omni.device=gohan
ro.twrp.boot=1
ro.twrp.version=3.0.2-1
ro.wifi.channels=
ro.allow.mock.location=1
ro.board.platform=msm8952
ro.build.id=MOB30M
ro.build.date=Tue Dec 6 11:41:07 EST 2016
ro.build.date.utc=0
ro.build.host=build
ro.build.tags=test-keys
ro.build.type=eng
ro.build.user=jenkins
ro.build.flavor=omni_gohan-eng
ro.build.display.id=omni_gohan-eng 6.0.1 MOB30M 2 test-keys
ro.build.product=Aquaris_X5_Plus
ro.build.version.sdk=23
ro.build.version.base_os=
ro.build.version.release=6.0.1
ro.build.version.codename=REL
ro.build.version.incremental=2
ro.build.version.preview_sdk=0
ro.build.version.all_codenames=REL
ro.build.version.security_patch=2016-06-01
ro.build.description=omni_gohan-eng 6.0.1 MOB30M 2 test-keys
ro.build.fingerprint=bq/omni_gohan/gohan:6.0.1/MOB30M/2:eng/test-keys
ro.build.characteristics=default
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.alarm_alert=Argon.ogg
ro.config.notification_sound=pixiedust.ogg
ro.dalvik.vm.native.bridge=0
ro.kernel.android.checkjni=1
ro.secure=0
ro.zygote=zygote32
ro.carrier=unknown
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.cpu.abilist=armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=
ro.product.name=Aquaris_X5_Plus
ro.product.board=msm8952
ro.product.brand=bq
ro.product.model=Aquaris X5 Plus
ro.product.device=Aquaris_X5_Plus
ro.product.locale=en-US
ro.product.manufacturer=bq
ro.baseband=msm
ro.bootmode=unknown
ro.hardware=qcom
ro.revision=0
ro.serialno=XH035792
ro.bootimage.build.date=Tue Dec 6 11:42:14 EST 2016
ro.bootimage.build.date.utc=1481042534
ro.bootimage.build.fingerprint=bq/omni_gohan/gohan:6.0.1/MOB30M/2:eng/test-keys
ro.bootloader=unknown
ro.debuggable=1
net.bt.name=Android
net.change=net.bt.name
sys.usb.ffs.ready=1
init.svc.adbd=running
init.svc.healthd=running
init.svc.ueventd=running
init.svc.recovery=running
init.svc.set_permissive=stopped
twrp.crash_counter=0
twrp.action_complete=0
debug.atrace.tags.enableflags=0
dalvik.vm.isa.arm.variant=cortex-a7
dalvik.vm.isa.arm.features=default
dalvik.vm.usejit=true
dalvik.vm.lockprof.threshold=500
dalvik.vm.dex2oat-Xms=64m
dalvik.vm.dex2oat-Xmx=512m
dalvik.vm.dex2oat-filter=verify-at-runtime
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.image-dex2oat-Xms=64m
dalvik.vm.image-dex2oat-Xmx=64m
dalvik.vm.image-dex2oat-filter=verify-at-runtime
persist.sys.usb.config=adb
persist.sys.dalvik.vm.lib.2=libart
service.adb.root=1
I:Copying file /cache/recovery/log to /cache/recovery/last_log
tw_get_context got selinux context: ubject_r:system_data_file:s0
I:Got default contexts and file mode for storage files.
I:Attempt to load settings from settings file...
I:InfoManager file '/data/media/TWRP/.twrps' not found.
I:Backup folder set to '/data/media/TWRP/BACKUPS/XH035792'
I:Copying file /etc/recovery.fstab to /cache/recovery/recovery.fstab
I:Version number saved to '/cache/recovery/.version'
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
I:TWFunc::Set_Brightness: Setting brightness control to 128
IageManager::LoadFileToBuffer loading filename: '/twres/languages/en.xml' directly
parsing languageFile
parsing languageFile done
I:Translating partition display names
I:Backup folder set to '/data/media/TWRP/BACKUPS/XH035792'
I:TWFunc::Fixup_Time: Pre-fix date and time: 1970-01-01--00-16-00
I:TWFunc::Fixup_Time: Setting time offset from file /sys/class/rtc/rtc0/since_epoch
I:TWFunc::Fixup_Time: will attempt to use the ats files now.
I:TWFunc::Fixup_Time: no ats files found, leaving untouched!
I:Enabling MTP during startup
I:Starting MTP
Starting MTP
I:sending message to add 65537 '/data/media' 'Internal Storage'
I:Message sent, add storage ID: 65537
I:sending message to add 65538 '/external_sd' 'Micro SDCard'
I:Message sent, add storage ID: 65538
MTP Enabled
I:Switching packages (TWRP)
I:Set page: 'system_readonly'
created new mtpserver object
MtpServer::run fd: 20
mtppipe add storage 65537 '/data/media'
MtpStorage id: 65537 path: /data/media
mtppipe add storage 65538 '/external_sd'
MtpStorage id: 65538 path: /external_sd
I:Is_Mounted: Unable to find partition for path '/vendor'
Iperation_start: 'Toggle System Mount'
Iperation_end - status=1
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Switching packages (TWRP)
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'wipe'
I:Set page: 'advancedwipe'
I:Set page: 'action_page'
Iperation_start: 'Format'
I:wipe list '/cache;/system;/data;'
I:wipe_path '/cache'
Formatting Cache using make_ext4fs...
Creating filesystem with parameters:
Size: 268435456
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 1024
Label:
Blocks: 65536
Block groups: 2
Reserved block group size: 15
Created filesystem with 11/16384 inodes and 2089/65536 blocks
warning: wipe_block_device: Wipe via secure discard failed, used discard instead
I:Recreating /cache/recovery folder.
I:Copying file /etc/recovery.fstab to /cache/recovery/recovery.fstab
I:Version number saved to '/cache/recovery/.version'
I:wipe_path '/system'
Formatting System using make_ext4fs...
Creating filesystem with parameters:
Size: 2684354560
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 10240
Label:
Blocks: 655360
Block groups: 20
Reserved block group size: 159
Created filesystem with 11/163840 inodes and 21489/655360 blocks
warning: wipe_block_device: Wipe via secure discard failed, used discard instead
I:wipe_path '/data'
Wiping data without wiping /data/media ...
I:skipped '/data/lost+found'
I:skipped '/data/media'
Done.
I:sending message to add 65537 '/data/media' 'Internal Storage'
I:Message sent, add storage ID: 65537
Updating partition details...
mtppipe add storage 65537 '/data/media'
MtpStorage id: 65537 path: /data/media
E:MtpServer::addStorage Storage for storage ID 65537 already exists.
Iata backup size is 0MB, free: 6614MB.
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
...done
I:Set page: 'action_complete'
Iperation_end - status=0
I:Set page: 'clear_vars'
I:Set page: 'advancedwipe'
I:Set page: 'wipe'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'install'
I:Set overlay: 'select_storage'
I:Backup folder set to '/external_sd/TWRP/BACKUPS/XH035792'
I:Set overlay: ''
I:Set page: 'clear_vars'
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'flash_zip'
Iperation_start: 'Flashing'
Installing zip file '/external_sd/lineage-14.1-20170223-nightly-paella-signed.zip'
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip does not contain SELinux file_contexts file in its root.
I:Legacy property environment initialized.
script aborted: E3004: This package is for device: piccolometal,picmt,paella,Aquaris_X5; this device is Aquaris_X5_Plus.
E3004: This package is for device: piccolometal,picmt,paella,Aquaris_X5; this device is Aquaris_X5_Plus.
E:unknown command [log]
Updater process ended with ERROR: 7
I:Legacy property environment disabled.
Error installing zip file '/external_sd/lineage-14.1-20170223-nightly-paella-signed.zip'
Updating partition details...
Iata backup size is 0MB, free: 6614MB.
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
...done
I:Set page: 'flash_done'
Iperation_end - status=1
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'flash_zip'
Iperation_start: 'Flashing'
Installing zip file '/external_sd/1.6.0_20161229-1655-gohan-user-1047-FW.zip'
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
Could not find 'META-INF/com/google/android/update-binary' in the zip file.
Error installing zip file '/external_sd/1.6.0_20161229-1655-gohan-user-1047-FW.zip'
Updating partition details...
Iata backup size is 0MB, free: 6614MB.
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
...done
I:Set page: 'flash_done'
Iperation_end - status=1
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
Iperation_start: 'Copy Log'
I:Copying file /tmp/recovery.log to /external_sd/recovery.log
solved (partly) !!!!!
I can boot again and have a partly working phone with cyanogen.
Thanks to this zip file cm-13.0-20161206-UNOFFICIAL-gohan
martexx said:
BQ seems not to have release a firmware online, the flashtool does not work as it complains that the phone is locked,
Click to expand...
Click to collapse
No, they have placed here
https :// www bq.com/en/support/aquaris-x5-plus/support-sheet
martexx said:
solved (partly) !!!!!
I can boot again and have a partly working phone with cyanogen.
Thanks to this zip file cm-13.0-20161206-UNOFFICIAL-gohan
Click to expand...
Click to collapse
Hi,
if still needed, try this:
1.) Download current firmeware (1.6.0) from bq.
2.) unzip the file
3.) boot to fastboot -> shutdown your device -> press on/off + "-" Volumekey -> device restarts to white screen fastboot mode
4.) connect your phone with your computer (USB-Cabel)
5.) start "cmd" (on windows)
6.) navigate to unzip location (for example: C:\dev\BQ\Aquaris_X5_Plus-bq-1.6.0_20161229-1655-gohan-user-1047-FW)
7.) run "8976_fastboot_all_images.bat" <-this will flash the complete firmeware, complete reset (DATA / RECOVERY - ALL!!)
Bye Ping_2000
hello there,
I want to flash a new rom to this device but i can't start the phone anymore because it's asking for an old google account that was log into it.In this case i can't acces the phone and activate developer mode and unlock bootloader option.If i try to unlock bootloader with BQ Firmware update tools it say me to add a file to unlock bootloader,but i don't have such a file.
Can you upload a file to unlock bootloader or It's any other way to disable bootloader with fastboot command??
cristinelxxx said:
hello there,
I want to flash a new rom to this device but i can't start the phone anymore because it's asking for an old google account that was log into it.In this case i can't acces the phone and activate developer mode and unlock bootloader option.If i try to unlock bootloader with BQ Firmware update tools it say me to add a file to unlock bootloader,but i don't have such a file.
Can you upload a file to unlock bootloader or It's any other way to disable bootloader with fastboot command??
Click to expand...
Click to collapse
Hi,
1.) flash actual firmeware with BQ-Flashtool
2.) access dev options
3.) unlock bootloader
Bye Ping_2000
Ping_2000 said:
Hi,
1.) flash actual firmeware with BQ-Flashtool
2.) access dev options
3.) unlock bootloader
Bye Ping_2000
Click to expand...
Click to collapse
I can't install any firmware because it say that device is locked and before flash a new firmware i should unlock it.
cristinelxxx said:
I can't install any firmware because it say that device is locked and before flash a new firmware i should unlock it.
Click to expand...
Click to collapse
In case this didn't work, i don't know any other way. Sorry.
Bye Ping_2000
hello all,
i hae a problem while updating my bq x5 due to low battery its power off and now after charging just stuck at cynogenmod any instruction or tutorial for em?
Root BQ Aquaris X5 Plus, Addition (Tested)
Root BQ Aquaris X5 Plus(Tested)
1. activate developer options on the device
2. enable Bootloader-Unlock on the device
3. download and install ADB und fastboot on: https://forum.xda-developers.com/showthread.php?t=2317790
4. latest usb driver on your PC on: http://www.bq.com/en/support/aquaris-x5-plus/support-sheet
5. download latest TWRP on: https://dl.twrp.me/gohan/
6. download SuperSu zip file on: https://download.chainfire.eu/1220/SuperSU/SR5-SuperSU-v2.82-SR5-20171001224502.zip
Steps:
1.) boot to fastboot -> shutdown your device -> press on/off + "-" Volumekey → device restarts to fastboot mode
2.) connect to your pc via usb cable
3.) start command shell (cmd) in the fastboot instalation folder on your PC and check for the device connection with the command:
"fastboot devices"
4.) do the unlocking
"fastboot oem unlock-go"
„fastboot flashing unlock“
„fastboot flashing unlock_critical“
5.) boot TWRP image file in the command line, showing the pathway to the file:
„.............twrp-3.1.1-0-gohan.img“
6.) Put the SuperSu zip file in the device memory and flash SuperSu zip with TWRP, then restart the device. Done!!!!
---------- Post added at 12:37 AM ---------- Previous post was at 12:34 AM ----------
Root BQ Aquaris X5 Plus(Tested)
1. activate developer options on the device
2. enable Bootloader-Unlock on the device
3. download and install ADB und fastboot on: https://forum.xda-developers.com/showthread.php?t=2317790
4. latest usb driver on your PC on: http://www.bq.com/en/support/aquaris-x5-plus/support-sheet
5. download latest TWRP on: https://dl.twrp.me/gohan/
6. download SuperSu zip file on: https://download.chainfire.eu/1220/SuperSU/SR5-SuperSU-v2.82-SR5-20171001224502.zip
Steps:
1.) boot to fastboot -> shutdown your device -> press on/off + "-" Volumekey → device restarts to fastboot mode
2.) connect to your pc via usb cable
3.) start command shell (cmd) in the fastboot instalation folder on your PC and check for the device connection with the command:
"fastboot devices"
4.) do the unlocking
"fastboot oem unlock-go"
„fastboot flashing unlock“
„fastboot flashing unlock_critical“
5.) boot TWRP image file in the command line, showing the pathway to the file:
„.............twrp-3.1.1-0-gohan.img“
6.) Put the SuperSu zip file in the device memory and flash SuperSu zip with TWRP, then restart the device. Done!!!!