Develop Bugs

CM9 Beta0 browser question

I know this beta and all ....just wanted to know if anyone else is experiencing choppy browsing. Like when the page loads completely and you scroll to a section and its blurred....you need to wait for it to render.
Sent from my SPH-D700 using Tapatalk

I have not seen this.
Sent from my SAMSUNG-SGH-I717 using xda premium

kryptoniteman said:
I know this beta and all ....just wanted to know if anyone else is experiencing choppy browsing. Like when the page loads completely and you scroll to a section and its blurred....you need to wait for it to render.
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Are you running Any undervolt? And if so how much and that means your running custom kernel so what's your I/0 scheduler and governor? Only answer if your running Custom Kernel. What browser there's a lot of things that can affect to that situation
Sent from my SPH-D700 using xda premium

I'm all stock. Experiencing this in both stock and dolphin HD browser. I'll try a fresh install and see what happens
Sent from my SPH-D700 using Tapatalk

kryptoniteman said:
I'm all stock. Experiencing this in both stock and dolphin HD browser. I'll try a fresh install and see what happens
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Try Dolphin MINI much faster and simpler than HD

I've been having that same prob on stock browser as well as boat and chrome. Clean flash, all stock.
Sent from my SPH-D700 using Tapatalk

Ok did a clean install and no change. I probably should have just waited till there is a release candidate instead of posting this.
Sent from my SPH-D700 using Tapatalk

kryptoniteman said:
Ok did a clean install and no change. I probably should have just waited till there is a release candidate instead of posting this.
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
have you tried downloading dolphin mini?

XxLostSoulxX said:
have you tried downloading dolphin mini?
Click to expand...
Click to collapse
I did. Its the same results. Its not really a big issue. I'm sure the devs are aware it since we are still in beta.
Sent from my SPH-D700 using Tapatalk

kryptoniteman said:
I did. Its the same results. Its not really a big issue. I'm sure the devs are aware it since we are still in beta.
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Not if it only occurs for a few. Check the bug tracker. If you don't see it then you may want to add it as well as a logcat of when it happens.

I experience this same issue on 3 different kernels. The page is stays blurred...sometimes for 30 seconds until it renders. This is the main issue which has made me stay away from cm9 recently. Some people have it, some dont. I have tried Dolphin mini with better results, but still bad to some degree.

I did a clean install of beta1 and its still there. Idk maybe I will try flashing back to stock and then flash beta1 and seen what happens
Sent from my SPH-D700 using Tapatalk

(Fix) MHL - HDMI TV out for jb roms

Use a build.prob editor and add the following....
1. com.qc.hdmi_out
2. ro.hdmi.enable
3. Reboot
4. Hit the thanks button if I helped
Sent from my SAMSUNG-SGH-T989 using xda premium

bmakk2055 said:
Use a build.prob editor and add the following....
1. com.qc.hdmi_out
2. ro.hdmi.enable
3. Reboot
4. Hit the thanks button if I helped
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
trying it out now! :good:
It works but does not auto rotate. Still though it works! appreciate it!

jctusa7 said:
trying it out now! :good:
Click to expand...
Click to collapse
Is it working for you?
Sent from my SAMSUNG-SGH-T989 using xda premium

No dice for me. Running CM 10.0.0 final.

fideli. said:
No dice for me. Running CM 10.0.0 final.
Click to expand...
Click to collapse
Plug in to TV then reboot and when phone starts it will pop up on TV
Sent from my SAMSUNG-SGH-T989 using xda premium

THANKS!!!
I tried it, and even pluged it in before a reboot but nothing shows up on screen. I see a little flickering, but nothing else.
Also, are you placing "com.qc.hdmi_out" under "Property Name" or "property Key"?
you may want to add "true" o your directions, they are not specific.
Thank you for your efforts none the less! This is a great step in the right direction. :good:

Works well thanks
Sent from my Galaxy Nexus using Tapatalk 2

Works thanks but does not rotate

supersain08 said:
Works thanks but does not rotate
Click to expand...
Click to collapse
That's how it was on cm9. Try this https://play.google.com/store/apps/details?id=nl.fameit.rotate
Sent from my SGH-T989 using xda premium

bmakk2055 said:
Plug in to TV then reboot and when phone starts it will pop up on TV
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
Works. A bit inconvenient but works nonetheless. Thanks a lot.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2

Worked for me
Sent from my SGH-T989 using xda premium

Will this work with official cm 10?
Sent from my HTC Ruby using xda app-developers app

aznvi3tric3guy said:
Will this work with official cm 10?
Sent from my HTC Ruby using xda app-developers app
Click to expand...
Click to collapse
Yes
Sent from my SAMSUNG-SGH-T989 using xda premium

tried this and it worked. only issue that remains for me is when the MHL cable loses power or is unplugged, the only way to re-initiate the hdmi-out sync is with a reboot of the device. anyone know of a way to manually trigger a resync?

Can anyone post a flashable fix for this, I am at my uncles house and was planning on watching a movie with my cousins and then I realized my jb ROM doesn't have mhl support :/
Sent from my SGH-T989 using Tapatalk 2

Nismo13 said:
Can anyone post a flashable fix for this, I am at my uncles house and was planning on watching a movie with my cousins and then I realized my jb ROM doesn't have mhl support :/
Sent from my SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
That would be hard because everyone's buildprop is different depending on the rom....
Sent from my SGH-T989 using xda premium

Nvm I figured it out , thanks!
Sent from my SGH-T989 using Tapatalk 2

Anyone have any idea why this isn't directly incorporated into CM10?

bmakk2055 said:
Use a build.prob editor and add the following....
1. com.qc.hdmi_out
2. ro.hdmi.enable
3. Reboot
4. Hit the thanks button if I helped
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
For me, setting "ro.hdmi.enable=true" does the job. I tried your com.qc.hdmi_out line also, but found that I had difficulty getting consistent results, but devices may differ. ROMs earlier than 10.0.0 Stable often crashed after using HDMI, after pulling out the cable, even though the video worked well up till that point. But recent ROMs seems to be stable for me.
It is a frustration for me that those who (probably) know about the deeper aspects of this issue (why it was never turned on in the default configuration) never comment on it, so those who want it to work spend lots of time fiddling with it. On the teamhacksung site, a statement was made that it will never work because it involves proprietary code, but that was some time ago, so who knows? The fact that it works well seems to suggest that all the needed code is present and functional, so the mystery is why it is never addressed by the developers explicitly, or turned on by default, or have a setting to turn it on as Galaxy S had.

jpnelson40 said:
For me, setting "ro.hdmi.enable=true" does the job. I tried your com.qc.hdmi_out line also, but found that I had difficulty getting consistent results, but devices may differ.
Click to expand...
Click to collapse
can you explain what you mean by the not getting consistent results? i'm going to try this approach and see what i get today.

Liquid smooth Rc7 att version graphical glitch help

I'm running liquid smooth rc7 and when I open an app that requires the screen to be horizontal it glitches and for example makes 5 loading circles on the screen. Or makes green lines of pixels. It also does this on the YouTube app when doing a full screen video. I've disabled hw overlays in the developer settings. Since I've read that that helps. But it hasn't. It helped for rc3 but not for rc7.any ideas on what I could do? It's not too much of a big deal since the rom and apps still work good. And run fine. It's just that transition that glitches that bothers me. Thanks
Sent from my SGH-I747 using xda premium

RC9 is out, try flashing that.

Any idea where I can find the download for it? I've looked around but I haven't seen it.
Sent from my SGH-I747 using xda premium

JSR33 said:
Any idea where I can find the download for it? I've looked around but I haven't seen it.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
http://goo.im/devs/liquidsmooth/RC9

JSR33 said:
Any idea where I can find the download for it? I've looked around but I haven't seen it.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Its in the OG development. If you've looked around I thought you would've looked in there...

[Q] NFC Polling Mode

Do any of the ROMS for S3 support NFC without unlocking the phone?

Search the dev section for the mod.
Sent from my SGH-I747 using xda premium

d3athsd00r said:
Search the dev section for the mod.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
I had found this mod back when I was using CM10.1 and tried it but it was breaking my WiFi/Bluetooth/data/phone/SMS... Any ideas? I am currently running ParanoidKANGdroid, but looking to possibly change to something else sometime soon.

drinfernoo said:
I had found this mod back when I was using CM10.1 and tried it but it was breaking my WiFi/Bluetooth/data/phone/SMS... Any ideas? I am currently running ParanoidKANGdroid, but looking to possibly change to something else sometime soon.
Click to expand...
Click to collapse
me too... if u find out lmk....

Well in that topic I neglected to read that it is incompatible with CyanogenMod, which is what I was using at the time.
However, and I'm not sure about other AOKPs but task650's 4.2.1 AOKP has the option to change it between screen on, screen off, and screen unlocked. I was having other issues with that ROM, however.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

I realize this thread hasn't been active for over a year,
But xPosed Installer has a lot of mods including NFC while the screen is off. Might want to check it out.

CM10.1 Stable Is Out

Has anyone tried it. What's it like?

coltonbauman said:
Has anyone tried it. What's it like?
Click to expand...
Click to collapse
I'm on it, no problems at all. I use Uber Kernel w/ it too.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

U know Tha main question that's going to be asked does Google hang outs work
sent from my carbonized GSII

Haven't touched CM10.1 nightly ROMs for a while. But the LED Notification stopped working, stayed on an older version of CM10.1 nightly.
Gonna try that when I get home. Also PA made it to this device. Also the Jedi mind trick Roms. So many options. Wow head's spinning.
Leaning towards CM10.1 though.

No signal, can't play video
I was using CM10.0. Updated CM10.1 with corresponding gapp.
-Can't register on cellular network anymore. Can't set AWS frequency in the factory testing mode.
-All of my Video apps start legging, play videos for a little while and quit after about a minute, say video format not supported. Even though the video is mp4 format and it was playing it before quitting.
How should fix it? Flash kernel? Which kernel should I use?

zhchaoxing said:
I was using CM10.0. Updated CM10.1 with corresponding gapp.
-Can't register on cellular network anymore. Can't set AWS frequency in the factory testing mode.
-All of my Video apps start legging, play videos for a little while and quit after about a minute, say video format not supported. Even though the video is mp4 format and it was playing it before quitting.
How should fix it? Flash kernel? Which kernel should I use?
Click to expand...
Click to collapse
Uber :thumbup::beer:
sent from my carbonized GSII

Had some problem with radio but I just had to update to the latest version and everything else looks fine

I tried to resist flashing this ROM but had to give in to temptation. Said to myself no more flashing when I got into boot issues with JMTJB6. Odin flashed stock and left it unrooted! Was happy...but then temptation. Happy I did it, rock solid, butter smooth, doesn't seem to have any lag.

vmartinez39 said:
Haven't touched CM10.1 nightly ROMs for a while. But the LED Notification stopped working, stayed on an older version of CM10.1 nightly.
Gonna try that when I get home. Also PA made it to this device. Also the Jedi mind trick Roms. So many options. Wow head's spinning.
Leaning towards CM10.1 though.
Click to expand...
Click to collapse
Works for me. Use Uber Kernel too.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

hatememarkz said:
U know Tha main question that's going to be asked does Google hang outs work
sent from my carbonized GSII
Click to expand...
Click to collapse
Works!
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

nivekx9 said:
Works for me. Use Uber Kernel too.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Thanks that did the trick. I was going mad at why the LED notifications stopped working.
Also still on the non-touch recovery, 5.0.26 the one that needs the Darkmod scripts to wipe cache and do full installs.
Also had to turn sensor on/off before it actually worked. Read that from another post from someone that helped me.
Thanks again dude.

vmartinez39 said:
Thanks that did the trick. I was going mad at why the LED notifications stopped working.
Also still on the non-touch recovery, 5.0.26 the one that needs the Darkmod scripts to wipe cache and do full installs.
Also had to turn sensor on/off before it actually worked. Read that from another post from someone that helped me.
Thanks again dude.
Click to expand...
Click to collapse
Sure, no problem , and consider upgrading to 6.x.x recoveries, no scripts needed!

nivekx9 said:
Works!
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
My contact still cannot hear me. Any fix for this... Skype not an option as my family doesn't use it.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 4 Beta

cstrips said:
I tried to resist flashing this ROM but had to give in to temptation. Said to myself no more flashing when I got into boot issues with JMTJB6. Odin flashed stock and left it unrooted! Was happy...but then temptation. Happy I did it, rock solid, butter smooth, doesn't seem to have any lag.
Click to expand...
Click to collapse
I just had two random reboots, it might be related to bluetooth.
Scenario 1: Answered a phone call via steering wheel controls in the car. Phone reboots
Scenario 2: While connected left the car car. Phone reboots.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

Flash video was not smooth for me. Even with latest Adobe update. But no MHL to TV support was the deal killer. Other than that it was fine.

rudytheinvisible said:
Flash video was not smooth for me. Even with latest Adobe update. But no MHL to TV support was the deal killer. Other than that it was fine.
Click to expand...
Click to collapse
sorry man.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

cstrips said:
I just had two random reboots, it might be related to bluetooth.
Scenario 1: Answered a phone call via steering wheel controls in the car. Phone reboots
Scenario 2: While connected left the car car. Phone reboots.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Are you using a custom kernel? And did you wait the 10 minutes after the flash?
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

No custom kernel. Flashed it days ago...reboot occurred today...Yes I did wait the 10 minutes after initial flash.
Is this a known problem? Would a custom kernel like uber kernel be more stable? I really like this ROM so far as is.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

cstrips said:
No custom kernel. Flashed it days ago...reboot occurred today...Yes I did wait the 10 minutes after initial flash.
Is this a known problem? Would a custom kernel like uber kernel be more stable? I really like this ROM so far as is.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
I'm using Uber and I haven't had a RR yet.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app