Hi i've come here many times before for any hiccups that came up for me with my phone but this time I believe I need help. I'll start it off with me earlier this week I was running CyanogenMod 10.1 and felt like I wanted to change it up leading me to isntall synergy onto my S3 (completed two nights ago). Today I decided it just wasnt doing it for me. Picked a new ROM ( Paranoid ).
This is where the problem comes in, I started the usual to flash a new ROM, put it into recovery and then started the factory/data reset. it froze waited half an hour for it to complete but it did'nt. Rebooted it into recovery as now I cant boot back into the software anyways. tried the same thing but wiped the cache and dalvik cache first. same thing happened froze on the factory reset. At this time I decided to reset it completley and get rid of the root, flashing the stock firmware. Odin also froze everytime, I cant even reinstall the stock firmware after failing everytime around the Nand area. I found this thread (http://forum.xda-developers.com/showthread.php?t=1840030) with I think a similar problem im really not sure as I cant do anything but the thing is, is that its for Verizon Galaxy S3 ( im on Rogers Canada). I'm sure I can fix this somehow as I can put it into download mode still but any help from the community would be greatly appreciated.
How far does Odin get during the stock ROM flash, before it freezes up on you?
I would try to Odin a stock recovery. Not the ROM & everything, just the recovery. Then go into the stock recovery and wipe everything.
Then Odin the stock ROM. Maybe try an ICS one if you were failing on the JB one.
CZ Eddie said:
How far does Odin get during the stock ROM flash, before it freezes up on you?
I would try to Odin a stock recovery. Not the ROM & everything, just the recovery. Then go into the stock recovery and wipe everything.
Then Odin the stock ROM. Maybe try an ICS one if you were failing on the JB one.
Click to expand...
Click to collapse
It says Nand write start, and then complete (write) operation failed. On the phone in download mode it says Secure check Fail : aboot . CMW works for me still ? is that what you mean ? if so the data/factory reset freezes. I do have a RecoveryGalaxyS3USCanada.tar file in my Root folder, if I should flash that.... but its been so long I forget what its for. Thank you for the feedback ive been searching all day and wasnt able to find anything useful so far. Right now im downloading older stock firmwares to attempt to flash them, hopefully they pan out.
The utility in this thread offers an option to flash the stock recovery. I'd try it out and see what happens!
http://forum.xda-developers.com/showthread.php?t=1746665
Flash stock recovery and then boot to the stock recovery and restore to defaults. Then flash a stock ROM.
Stock recovery = Samsung recovery, not TWRP or Clockwork.
I had 2 soft bricks with cm this week. Had to Odin back to rooted stock for one. The other back to rooted stock and had to factory reset with Samsun 3e recovery before the phone would boot.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Okay i've installed everything (drivers, toolkit, deleted Kies) and now when im going in to flash the stock recovery it says its waiting for USB debugging, which I can't re-anable since im stuck in a boot loop. Am I screwed here ?
French1747 said:
Okay i've installed everything (drivers, toolkit, deleted Kies) and now when im going in to flash the stock recovery it says its waiting for USB debugging, which I can't re-anable since im stuck in a boot loop. Am I screwed here ?
Click to expand...
Click to collapse
can you still access recovery? i'm assuming it's twrp or cwm
if so, here's cwm flashable stock firmware from upndwn4par. flash it, boot in, turn on debugging.
http://d-h.st/8OQ
xBeerdroiDx said:
can you still access recovery? i'm assuming it's twrp or cwm
if so, here's cwm flashable stock firmware from upndwn4par. flash it, boot in, turn on debugging.
]
Click to expand...
Click to collapse
Thank you so much! I doubted it at first just because of the other roms and stock ones also never worked but this one has it up and running smoothy. I want to play it safe just so I dont screw up again so I'm gonna ask you guys one more thing.. Would it be safe to try and flash the Paranoid ROM now? ( I dont believe it was the problem earlier since I never actually got to installing it). The problem was something around the lines of not being able to write things onto the device. ex Data/Factory reset freezing everytime on CMW, while Odin also failed everytime it made to the step of flashing/writing in the stock ROM.
Thanks everyone, your're all very helpful !
If it were me, I'd Odin a stock/rooted JellyBean ROM first. Just to get to get all the correct files & structure on there. THEN I would flash whatever you want.
First, sorrt to speak french, but thatnll be more easy for me to tell it.
A partir du moment ou tu peux passer en mode download, tout va bien ^_^
Il m'est deja arrive sur mon teos de corrompre ma partition systeme et de repartir comme si de rien n'etait avec un flash.
Reflashe avec odin et reessaie
Sent with my AiKi and optimus rom
CZ Eddie said:
If it were me, I'd Odin a stock/rooted JellyBean ROM first. Just to get to get all the correct files & structure on there. THEN I would flash whatever you want.
Click to expand...
Click to collapse
French1747 said:
Thank you so much! I doubted it at first just because of the other roms and stock ones also never worked but this one has it up and running smoothy. I want to play it safe just so I dont screw up again so I'm gonna ask you guys one more thing.. Would it be safe to try and flash the Paranoid ROM now? ( I dont believe it was the problem earlier since I never actually got to installing it). The problem was something around the lines of not being able to write things onto the device. ex Data/Factory reset freezing everytime on CMW, while Odin also failed everytime it made to the step of flashing/writing in the stock ROM.
Thanks everyone, your're all very helpful !
Click to expand...
Click to collapse
i agree with coming from stock firmware when flashing. i would also make sure my cwm was up-to-date while i was at it. i would also boot into recovery and make a nandroid now so you'll have one. with that being said, here ya go:
http://forum.xda-developers.com/showthread.php?t=2179330
in the above link:
step 1: take the time to backup your imei if you havent already
step 2: this is stock with root already injected
step 3: if you dont have rom manager, download it and update your recovery if you're not running 6.0.2.3 or higher
step 4 & 5 are self explanatory
cheers
xBeerdroiDx said:
i agree with coming from stock firmware when flashing. i would also make sure my cwm was up-to-date while i was at it. i would also boot into recovery and make a nandroid now so you'll have one. with that being said, here ya go:
http://forum.xda-developers.com/showthread.php?t=2179330
in the above link:
step 1: take the time to backup your imei if you havent already
step 2: this is stock with root already injected
step 3: if you dont have rom manager, download it and update your recovery if you're not running 6.0.2.3 or higher
step 4 & 5 are self explanatory
cheers
Click to expand...
Click to collapse
The only thing so far (that I have noticed) is that the data/factory reset still does not work, I'm going to continue like you said earlier and flash stock recovery and my own stock firmware for Rogers now that I have turned debugging mode on. my cmw currently is 6.+ and my previous Nandroid backups would also get stuck when I tried to restore to them, I'm assuming that since I still can't factory reset that I wont be able to restore back to them but I will see. Should I make another nandroid even when its still in a semi-messed up state ?
Right now I seriously just want to get rid of the stupid data reset problem.
French1747 said:
The only thing so far (that I have noticed) is that the data/factory reset still does not work, I'm going to continue like you said earlier and flash stock recovery and my own stock firmware for Rogers now that I have turned debugging mode on. my cmw currently is 6.+ and my previous Nandroid backups would also get stuck when I tried to restore to them, I'm assuming that since I still can't factory reset that I wont be able to restore back to them but I will see. Should I make another nandroid even when its still in a semi-messed up state ?
Right now I seriously just want to go back to step one of everything, unrooted stock fimrware with access to Gapps and continue from there. Most of all get rid of the stupid data reset problem.
Click to expand...
Click to collapse
where are you saying the data/factory reset isnt working? cwm or in android settings?
i would download rom manager and update cwm to latest (6.0.3.0), boot into cwm recovery and try making a nandroid.
and i dont think you're as messed up as you think you are right now. you're rooted, with stock firmware and a custom recovery.
when i was ready, i would update recovery, in recovery make a backup, (still in recovery) wipe data/factory reset, wipe cache/dalvik, flash rom
xBeerdroiDx said:
where are you saying the data/factory reset isnt working? cwm or in android settings?
i would download rom manager and update cwm to latest (6.0.3.0), boot into cwm recovery and try making a nandroid.
and i dont think you're as messed up as you think you are right now. you're rooted, with stock firmware and a custom recovery.
when i was ready, i would update recovery, in recovery make a backup, (still in recovery) wipe data/factory reset, wipe cache/dalvik, flash rom
Click to expand...
Click to collapse
Google apps arent showing up for me either, Tried installing them and they did succesfully but i still dont see them. anyways I'm on a slightly lower version of cmw then 6.0.3.0 , can I flash the new version over the current one im on, since I cant install through the play store ?
French1747 said:
Google apps arent showing up for me either, Tried installing them and they did succesfully but i still dont see them. anyways I'm on a slightly lower version of cmw then 6.0.3.0 , can I flash the new version over the current one im on, since I cant install through the play store ?
Click to expand...
Click to collapse
boot into cwm and flash gapps again. flash twice to be sure. reboot. lemme know
I believe everything is working perfectly now, installed Rom manager from the web and updated cmw. Once more tried to data wipe from cmw and it froze again this time crashing by itself, I then went back into it went and formatted my data and then tried the wipe data, this time it worked for me and I proceeded to wipe the cach and dalvik, installed paranoid and everthing is working fine, ill post an update if i notice anything else happens but so far it looks perfect. Thank you so aton, I appreciate it guys especially you "Beer". Now I can relax on my birthday and stop tinkering around on my phone haha.
( Not sure why Gapps wer'nt working earlie,r but i'm done )
Same problem here
The same thing happened to me while trying to Odin to ATT stock rom. Flash stopped half way and Odin showed failed. Tried to reboot into download mode to repeat procedure and would not go into download mode. Phone will reboot but into android recovery mode. When I try to run an update from sd card I get a "file verification error" and the process aborts. I'm going to try this process to see if I have any better results.
Hey guys all my restores are failing half way through. It also fails if I try to factory reset or wipe dalvik but wipe cache works fine It fails if i try flash any ROM.. And if I try to boot to system it shows SG logo then black screen I'm really kind of lost here. I've already tried flashing 4 different versions of Twrp/clockworkmod and I get the same result every time. The roms I'm trying to flash were running fine on my device before this happened. Never seen this before please help thank you.
Sent from RootBox infected sensation or my PacMan e739
djwuh said:
Hey guys all my restores are failing half way through. It also fails if I try to factory reset or wipe dalvik but wipe cache works fine It fails if i try flash any ROM.. And if I try to boot to system it shows SG logo then black screen I'm really kind of lost here. I've already tried flashing 4 different versions of Twrp/clockworkmod and I get the same result every time. The roms I'm trying to flash were running fine on my device before this happened. Never seen this before please help thank you.
Sent from RootBox infected sensation or my PacMan e739
Click to expand...
Click to collapse
is this an i747 or i747m (carrier?)? what was the last thing you did to the device/had you just modified or flashed something? were you using recovery or odin to flash the 4 different recoveries?
xBeerdroiDx said:
is this an i747 or i747m (carrier?)? what was the last thing you did to the device/had you just modified or flashed something? were you using recovery or odin to flash the 4 different recoveries?
Click to expand...
Click to collapse
I have sgh i747 at&t us model. Unlocked Sim for Tmobile use. Before having problems. I flashed vanilla rootbox att nightly. it was running fine then I flashed acid audio mod. And it worked but not well with my player of choice. So i flashed a restore from fright before the sound mod. And all I got was 2 different Samsung logos then black screen. At this point Twrp started asking for a password. I tried an older backup. (rootbox stable) and it booted fine. Everything seemed to be working. But when I rebooted again I got the 1St SG logo then black screen. Now recovery doesn't read anything on the internal card as well as the other problems I stated. I used mskips toolkit to flash Twrp originally and now I've been flashing back and forth between recoveries using recovery flashable zips. Also every time I flash roms or restore I did factory wipe/cache/dalvik and after I started having these issues I tried wiping system and that didn't help either. Thanks for trying to help
Sent from RootBox infected sensation or my PacMan e739
what recovery are you currently sitting on?
Twrp 2.4.4.0 is what I started with and now I'm back on it but from a flashable zip this time instead of whatever mskips toolkit used
Sent from RootBox infected sensation or my PacMan e739
here is the link to an odin flashable twrp 2.5.0.0 tar: http://techerrata.com/file/twrp2/d2att/openrecovery-twrp-2.5.0.0-d2att.tar
and here's a recovery flashable twrp 2.5.0.0 zip link: http://forum.xda-developers.com/attachment.php?attachmentid=1917517&d=1367104589
if you flash in recovery, be sure to reboot recovery in order to boot into the new version. i'm sure you know most of this but i'm just trying to cover all the bases.
is twrp still asking for the password or were you able to get passed that?
if you have a micro sd card, you could place a ROM/gapps on it, flash this latest twrp recovery from odin or recovery, perform a full wipe (cache, dalvik, data, system) and flash the ROM/gapps. see if that remedies your situation.
if you dont have a micro sd card, and it appears you've wiped the system so there's no OS, you may have to odin back to rooted stock and start over. keep me posted
Still no luck. i flashed twrp2.5 through recovery and after rebooting back to recovery it still asked for a password so I hit cancel at which point it lets me continue and after full wipe as you described above and a fresh flash of stable rootbox 3.9.1 (md5 matched) im still in the same situation. also factory wipe says failed still
I think at this point if it were me, I would Odin flash back to stock then start from scratch. Pain in the butt I know, and no guarantee, but usually flash back to stock is a safe bet.
Another option is to grab the Odin flashable cwm tar in the "root from recovery" method in the general section. Flash the tar, boot into recovery and flash the 6.0.3.1 zip in post #2 of my signature link. Reboot recovery and try wiping/flashing again.
Since you're not entering the password in TWRP, I think that's why you're not getting successful wipes and flashes.
now I used the power+home+vol down button combo to see if bootloader would start. it gave me a choice to download a custom rom or cancel so I canceled and the phone rebooted and i was blessed with the beautifull rootbox animation. my rootbox 3.9.1 nandroid booted and seems to be running fine. Now Im afraid to reboot in fear it will start the whole process over again. any suggestions? or should I just leave it powered on for the rest of its life lol
edit: well I got up the guff to reboot and everything came back fine again WTH. this is so weird, I wish I had a clue what happened. anyways I just wanted to thank you guys one more time for you help. hopefully we wont have to come back to this thread. Peace ;-]
Man that is strange. If that ever happens again it would be interesting to see the log if you can get it. I wonder if there were issues mounting a partition and/or your SD card. If TWRP and CWM were both having an error and the files were on your SD card that would probably be the only thing in common that could cause something like this. Some Transformers seemed to have the password issue, but doesn't seem related to your experience. Glad you got it sorted.
I was running the latest Carbon nightlies on my Rogers GS3 and I wanted to return the phone back to stock. I downloaded the latest Rogers Firmware and flashed the .tar file through Odin. Everything worked but when the phone rebooted, it got stuck in a bootloop on the samsung logo. My TWRP got replaced by stock recovery so I cannot restore any backups. What should I do???
There could be several causes to this issue. Some that come to mind are:
-You have old files in your cache, system partition, or internal memory that are interfering with the stock ROM
-You downloaded the wrong ROM for your phone
-The ROM file you flashed was corrupted
-Something went wrong in the flashing process
-Something else
I think the simplest way to try and get back to stock is to just install Samsung Kies on your computer, and run the emergency firmware recovery.
It will ask for your model and serial number, and from that will find the exact firmware for your phone. You put your phone into download mode, plug it in, and Kies will do the rest.
bobyum said:
I was running the latest Carbon nightlies on my Rogers GS3 and I wanted to return the phone back to stock. I downloaded the latest Rogers Firmware and flashed the .tar file through Odin. Everything worked but when the phone rebooted, it got stuck in a bootloop on the samsung logo. My TWRP got replaced by stock recovery so I cannot restore any backups. What should I do???
Click to expand...
Click to collapse
Hopefully you have set TWRP to backup to external SD card because you will likely need to do a factory reset/full wipe in order to get the phone past boot loop. There are lingering OS settings remaining from Carbon that prevent you from booting stock. A factory reset will fix this and you will boot stock just fine. Hopefully you have backed up what you need before this though because factory reset will wipe your internal memory at the cost of fixing the stock ROM
Just a heads up, a factory reset is always required after flashing back to stock firmware. You did nothing wrong. Cheers
Thanks Everyone! I will try out the suggestions!
Hi, all. Just like the title says. I'm stuck in a bootloop and not sure what to do.
TWRP 2.5
Went from Docs deodexed T999L ROM to SlimBean 2.2
then...
I was making a backup of SlimBean 2.2 on TWRP 2.5 I believe and that went fine. I then went to do a factory reset but it gave me some kind of error that data wasn't found or was found. It was all confusing to me. So I decided to upgrade to the latest TWRP 2.6.3.1 from Doc's signature (I think that was it). I rebooted into the new TWRP and when I went to do a factory reset, it rebooted constantly. So I went into recovery again, and I was able to clear, dalvik, cache, and system, but freezes and reboots when trying to clear data.
Stupid me, I then flashed TWRP 2.5 again, and now I can't get into the recovery settings. It was show the blue TeamWin logo, but then reboots, shows the Galaxy S3 T999L logo, then the SlimBean boot screen, then reboots, repeating this over and over again.
So basically I have no working custom recovery, no operating system, but I can get into download mode.
Not exactly sure where to go from here. I rooted using the recovery method about a month or so ago. Do you think I can just go through the root process and flash TWRP 2.6.3.1 from Odin?
Thanks in advance!
Edit:
A little bit more, I was running Stock 4.1.2 before the rooting process and never did the official 4.3 update.
Also, in Doc's T999L info thread, could I essentially just revert back to stock using Odin? Or will my non-wiped data be a problem?
Aha! Never mind, everyone. I looked more into it and reverted back to stock using Root66 in Doc's thread.
Anyway, hope this helps anyone in the future if you come across this.
Have a good holiday, yall!
Edit:
So good news bad news, I could finally boot into TWRP 6.2.3.1, but doing a factory reset I still got this: "error: opening data/lost+found"
So I ended up formatting the data. All is well now and that error doesn't show up anymore.
Hope this helps!