I've read good reviews about the Fosmon Crystal Clear protector here, but on Amazon many reviews complain about it being too small. Can anyone using this confirm either way?
vinuneuro said:
I've read good reviews about the Fosmon Crystal Clear protector here, but on Amazon many reviews complain about it being too small. Can anyone using this confirm either way?
Click to expand...
Click to collapse
I think they might purposefully be cut short to accommodate for a case.
I was able to snatch a 3 pack for 2 dollars and what à steal!!! Cant be beat for the fit is fine. Its perhaps half a milimeter short in all directions.
Sent from my HTC One using Tapatalk 2
suparnemo said:
I think they might purposefully be cut short to accommodate for a case.
Click to expand...
Click to collapse
That sounds very useful I've found most screen protectors are too big to use with cases
Sent from my HTC One using xda app-developers app
Are fosmon dry apply or wet?
Sent from my HTC One
phositadc said:
Are fosmon dry apply or wet?
Sent from my HTC One
Click to expand...
Click to collapse
Dry application.
They run a bit small, pretty much a full 1mm on each side. When I first put it on, I lined it up too close to one edge because u didn't realize how short it was in the other.
Using a tpu case, I found that parts of the edge could get pushed up by the lip of the case, reinstalling the screen protector square fixed this. You get used to it being short, even though I wish they gave just an extra mm height wise. The quality of the screen protector is good, clarity and feel are excellent, cleans easy enough, and I haven't picked up any scratches yet.
I actually ordered the supcase screen protectors that supposedly fit to 0.3mm, as well as the amfilm ones that are 50 cents shipped right now. I'll report my findings later.
I like it, it was inexpensive, it came with 3 which was good because I messed up the first application. It is very clear, a bit small but I guess that's for cases.
Sent from my HTC One using xda app-developers app
Related
Does anyone have a xo skins "case fit" screen protector? If so would you mind posting a pic?
I bought the regular one for my s3 and have been very happy with it.. a couple tpu cases showed up yesterday tho and they peeled up some of the edges of my standard fit protector.. pissed..
Anyhoo.. I'd like to see it on our phones if its a substantial enough change to warrant forking over another 14 bucks for a case fit one.. only had this dang thing on for 2 weeks..
Tia
Sent from my SPH-L710 using xda app-developers app
Sorry, no pics, but I had a case fit from xoskins on my GNex and it did make a difference with TPU cases.
I bought a few Cruzerlite cases off Amazon, and the case fit was a perfect match. Sat on the screen just barely away from the case.
I would send an email to their customer service (http://xoskins.com/contact-us) and let them know you made a "mistake", and are using a case now. I bet they'll send you a case fit for free as a replacement.
They've always been great to me!
AnglHuntr said:
Sorry, no pics, but I had a case fit from xoskins on my GNex and it did make a difference with TPU cases.
I bought a few Cruzerlite cases off Amazon, and the case fit was a perfect match. Sat on the screen just barely away from the case.
I would send an email to their customer service (http://xoskins.com/contact-us) and let them know you made a "mistake", and are using a case now. I bet they'll send you a case fit for free as a replacement.
They've always been great to me!
Click to expand...
Click to collapse
What are u using now for a screen protector? Have u found something you like better?
Also..do u know what they would ask for? I have the protector on my phone.. I don't think I have my receipt tho :banghead:
Sent from my SPH-L710 using xda app-developers app
I'm going to try 2 things:
1. I bought a Diztronics case from Amazon, and it came with a screen protector. There's a noticeable gap around the edge of the screen, but the quality of the case and protector are awesome.
2. I ordered protectors from bestskinsever.com. $8.99 for a full phone protector. I've used them in the past, and they are good for the price. If you check their site, they have recently upgraded their skins to match xoskins / Invisible Shield HD quality. I'm waiting for them to show up, so I'll update later.
I think XO will only need your email address you used when placing the order. That's all I've ever given them.
Shoot them an email with all the info you can remember... worst thing they'll say is no
AnglHuntr said:
I'm going to try 2 things:
1. I bought a Diztronics case from Amazon, and it came with a screen protector. There's a noticeable gap around the edge of the screen, but the quality of the case and protector are awesome.
2. I ordered protectors from bestskinsever.com. $8.99 for a full phone protector. I've used them in the past, and they are good for the price. If you check their site, they have recently upgraded their skins to match xoskins / Invisible Shield HD quality. I'm waiting for them to show up, so I'll update later.
I think XO will only need your email address you used when placing the order. That's all I've ever given them.
Shoot them an email with all the info you can remember... worst thing they'll say is no
Click to expand...
Click to collapse
Actually I took your advice and shot them an email.. just saying I wanted a case fit and asked if they thought it would work better with my tpu I just got.
Got a reply the next day.. they are shipping me a case fit for free.. just told me to keep my spray and squeegee..
Really impressed with xoskins customer service..
I got that protector with the diztronic too.. I just hate dry protectors I suck at putting them on
Sent from my SPH-L710 using xda app-developers app
Great company. The only skin I'll use. I dropped mine on the carpet sticky side down and basically ruined it. They sent me a replacement for free.
X10D3 said:
Great company. The only skin I'll use. I dropped mine on the carpet sticky side down and basically ruined it. They sent me a replacement for free.
Click to expand...
Click to collapse
Agreed. And honestly its worlds ahead of other wet app protectors I've seen. Got a skinomi for my girls atrix.. thing feels like there's an inch of rubber on the screen.. these xoskins come out so nice..
Sent from my SPH-L710 using xda app-developers app
What is the difference between case fit and regular?
Jester23 said:
What is the difference between case fit and regular?
Click to expand...
Click to collapse
Case fit leaves some exposed on the edge of screen so you can supposedly use it with cases that cover the edge like tpu cases.
Sent from my SPH-L710 using xda app-developers app
Does anyone know a good one?. I see a lit for very little but I can't find any reviews. I don't like the feeling I something wget when I slide my finger across the screen and it has a ridiculous amount of friction
Sent from my HTCONE using xda premium
XxCE0xX said:
Does anyone know a good one?. I see a lit for very little but I can't find any reviews. I don't like the feeling I something wget when I slide my finger across the screen and it has a ridiculous amount of friction
Sent from my HTCONE using xda premium
Click to expand...
Click to collapse
I don't know if you like to dig into facts most of the screen protectors come for some factory and are exactly the same even with variable prices from sellers on ebay and amazon. Buy cheapest one and expensive one. Test it out and realise.
American consumers look at price tags, many will recommend steinheil, ghost armor and all those , and when u end up buying a 50c one and compare, u will be surprised.
Sent from my HTC One using xda app-developers app
On amazon look for tech armor anti glare + anti fingerprint matte protector that's what I use and it's amazing, comes with 3 and is like 6 bucks on amazon
Sent from my HTC One using Tapatalk 4 Beta
I also use the Tech Armor anti-glare and absolutely love them, and cheap too!! The company also stands very well behind their product.
I'm using atfolix since years on my smartphones and they were always pretty nice. They are very easy to attach plus they live really long.
Sent from my HTC One using xda app-developers app
I got the Tech Armor Anti-Glare ones from Amazon too. They work amazingly and haven't changed the first one out since I got the phone on release.
DreamEater69 said:
I got the Tech Armor Anti-Glare ones from Amazon too. They work amazingly and haven't changed the first one out since I got the phone on release.
Click to expand...
Click to collapse
Same here. I have to agree that there is definitely some grainyness but it doesn't show unless you are looking at solid light colors. Doesnt show in movies or games. Etc.
Sent from my HTCONE using xda premium
What about matte front and back shields, any suggestions for those?
Thanks you very much news, I think Samsung mobile phone accessories, screen protector is very good, very clear, and does not give Lewis a bad cell phone traces remain under the protection membrane cleaning can still continue to use the , is a very good accessoriesz
amFilm makes some good and cheap units that you can get on Amazon, so I'd recommend you take a look. I think it's $5 or so for three.
BlessedTalent said:
What about matte front and back shields, any suggestions for those?
Click to expand...
Click to collapse
This is what I run
http://www.ghost-armor.com/whatIsIt/matte
I got the i-Blason over the weekend and when I came into the office, I had a package waiting for me. It was the case that is kinda confusing to clarify because it's mixed in with other cases on Amazon. To clarify what I wanted, I went straight to the horses mouth and ordered it directly from i-Blason for $7.99USD+shipping.
http://www.i-blason.com/candygel-hybrid-tpu-hard-clear-case-for-google-nexus-5.html
The case, which is tpu is much more malleable/softer than the Spigen Ultra Hybrid. Also the i-Blason is very tpu-ish on it's lip unlike the Spigen UH, where the Spigen is ultra stiff.
When unpackaging the Candygel tpu, I also noticed that the case "looked" smaller than the Spigen UH. And when I was about to put it on, I said to myself, this doesn't look like it's going to fit! LOL. Glad I was wrong.
The case fit like a bodyglove. LOL I mean the case lip is very flexible and forgiving. And keep in mind I have a Spigen screen protector as well so I had to make sure that didn't come up. And thankfully, it did not. :good:
I have been using it and playing with it for a while and I have to say it's a pretty good case! The buttons are there, allbeit, covered, but the buttons now have feedback, compared to the Spigen UH. The volume buttons are also fine as well.
The ONLY fault I can find thus far is that on the bottom of the case has a scuff mark that was most likely done from the molding process, which I can forgive. It doesn't hinder the use of the case, it isn't sharp or uncomfortable because of it. I can even see it, but I know it's there. And I know I'll forget about it on day to day usage. The cut outs on the speaker aren't the best, but it's tpu and again, it isn't horrible, but I can notice it lol. The mic holes are perfectly exposed and just to note, the micro sim tray are covered. The clear back is why I got it. I can sport my dbrand white CF as well, where the other options before were the Spigen UH and Ringke fusion.
For the price, I can recommend this. and plays well with the Spigen screen protector thus far. The TPU makes the phone more form fitting and seems a tad smaller in holding it in my hands.
Anyways, here are some pics...enjoy! Oh and feel free to ask any questions or if you want pics at different angle and stuff like that.
How much bulk does this case add, in terms of height and width and also the thickness of the phone? I've been looking for a slim case to use with my dbrand skin as well, and I've been eyeing this one up.
Sent from my Nexus 5 using XDA Premium 4 mobile app
It's thinner compared to the spigen ultra hybrid if that helps. It's like a tpu case thickness. Meaning not very thick.
Sent from my Nexus 7 using XDA Premium 4 mobile app
its really looking much better than the spigen ultra hybrid....quite impressive one with the look wise....I would say that would be going to be a nice choice to go for.....
Does the clear back attracts fingers smudges and oil? I have a crystal Spigen ultra fit and I hate that about it.
Sent from my Nexus 5 using xda app-developers app
Theberge43 said:
Does the clear back attracts fingers smudges and oil? I have a crystal Spigen ultra fit and I hate that about it.
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
I want to say it's actually a bit better than the Spigen UH when it comes to the fingerprint magnet. But saying that, you have to take into account that I have a WHITE cf. That makes the fingerprints invisible and barely visible. But if you hold it at an angle, I can see some, but not as bad as the Spigen UH.
I just ordered a clone on ebay that looks to be exactly the same for $6 shipped from china. I went with ebay one cause there's no branding on it!!
aznchillin said:
I just ordered a clone on ebay that looks to be exactly the same for $6 shipped from china. I went with ebay one cause there's no branding on it!!
Click to expand...
Click to collapse
LOL I don't mind the branding. If it bugged me, I can use goo gone or fingernail polish remover to remove it. But please let us know how that one fares. It should be similar, they all are lol.
aznchillin said:
I just ordered a clone on ebay that looks to be exactly the same for $6 shipped from china. I went with ebay one cause there's no branding on it!!
Click to expand...
Click to collapse
Can you provide a link, shipping to Canada from I Blason is 15 $, which is ludacris.
Theberge43 said:
Can you provide a link, shipping to Canada from I Blason is 15 $, which is ludacris.
Click to expand...
Click to collapse
Comes in clear, white, or black
http://www.ebay.com/itm/Hybri-Flex-.../171175783257?ssPageName=ADME:L:eek:C:US:3160
aznchillin said:
Comes in clear, white, or black
http://www.ebay.com/itm/Hybri-Flex-.../171175783257?ssPageName=ADME:L:eek:C:US:3160
Click to expand...
Click to collapse
Thanks, ordered a white one.
Found another cheap one as well:
eBay item number:171177115078
mmedei9 said:
Found another cheap one as well:
eBay item number:171177115078
Click to expand...
Click to collapse
Only in black and mediocre feedback for a power seller in my opinion (98.8%), but it's cheaper if you're in need for the black!
aznchillin said:
Comes in clear, white, or black
http://www.ebay.com/itm/Hybri-Flex-.../171175783257?ssPageName=ADME:L:eek:C:US:3160
Click to expand...
Click to collapse
Tell me how it goes P:
Sent from my Nexus 5 using xda app-developers app
Great review,
That clear back with the white carbon fiber skin under looks very nice!!
Sent from my Nexus 5 using Tapatalk
Theberge43 said:
Does the clear back attracts fingers smudges and oil? I have a crystal Spigen ultra fit and I hate that about it.
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
What about scratches ? I just got a Tech21 case for my Nexus 5 and only had a few days and I can already see scratches building up. I am going to return it tomorrow. It does have a clear back which is what I was looking for. Thanks
DarkAce22 said:
What about scratches ? I just got a Tech21 case for my Nexus 5 and only had a few days and I can already see scratches building up. I am going to return it tomorrow. It does have a clear back which is what I was looking for. Thanks
Click to expand...
Click to collapse
Well you will eventually get scrathes. I have a white backing on my phone so you cannot see them at all. But looking at it without the phone in it, yes you can see scratches.
Amazon
Bugdroid circuit
http://www.amazon.com/gp/product/B00GWOR20Y
Please reply with more
Cannot recommend the cheap ebay ones. This one http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=231116130513
(after being shipped more than a week late) only half fits my Moto G (despite having a cutout, it obscures the power/volume buttons and hence makes operation an utterly frustating exercise)
Good leather case
I got this today, it is good, not great but cheap. But the screen protector does not fit something wrong with the dimensions I used the scissors, or maybe I could not fit properly. It folds at the back. that is nice.:good:
http://www.amazon.co.uk/dp/B00H3KNFNY/ref=pe_385721_37038051_TE_3p_dp_1
enrique097 said:
I got this today, it is good, not great but cheap. But the screen protector does not fit something wrong with the dimensions I used the scissors, or maybe I could not fit properly. It folds at the back. that is nice.:good:
http://www.amazon.co.uk/dp/B00H3KNFNY/ref=pe_385721_37038051_TE_3p_dp_1
Click to expand...
Click to collapse
Does that one switch the screen on/off ?
enrique097 said:
I got this today, it is good, not great but cheap. But the screen protector does not fit something wrong with the dimensions I used the scissors, or maybe I could not fit properly. It folds at the back. that is nice.:good:
http://www.amazon.co.uk/dp/B00H3KNFNY/ref=pe_385721_37038051_TE_3p_dp_1
Click to expand...
Click to collapse
That looks a lot like the one I got that doesn't fit...
Sent from my XT1032 using Tapatalk
michaelopolis said:
Does that one switch the screen on/off ?
Click to expand...
Click to collapse
No, Motorola will sell that but it is not leather but expensive though.
Sent from my XT1032 using XDA Premium 4 mobile app
michaelopolis said:
Does that one switch the screen on/off ?
Click to expand...
Click to collapse
Hi. If you have case even leather with do cover you can use the app hovering controls. It does not work smoothly but simulates what the shell is supposed to do.
A bit annoying is that many times of you keep your hand hovering it will lock your phone disturbing what you are doing.
Sent from my XT1032 using XDA Premium 4 mobile app
Ok so got a no questions asked refund. Now which one do I get instead? I want card slots, so the flip shell is out (aside of the rip off price)...
nupi said:
Ok so got a no questions asked refund. Now which one do I get instead? I want card slots, so the flip shell is out (aside of the rip off price)...
Click to expand...
Click to collapse
the leather one has cards slots, the quality is not the finest but it is leather it works ok
enrique097 said:
the leather one has cards slots, the quality is not the finest but it is leather it works ok
Click to expand...
Click to collapse
For 4GBP shipped to Switzerland I thought I'd try.
just ordered this
ringke slim hard case with screen protector. i got the clear one cause i plan on changing my back cover with another color
it got shipped today even though they said it wouldnt be in stock til 23rd????
903tex said:
just ordered this
ringke slim hard case with screen protector. i got the clear one cause i plan on changing my back cover with another color
it got shipped today even though they said it wouldnt be in stock til 23rd????
Click to expand...
Click to collapse
It would be great if you updated on how this goes, is there any estimated delivery date? I have been looking for a case than has separate holes for the camera/flash and have been we waiting for that one to come into stock.
Damieok said:
It would be great if you updated on how this goes, is there any estimated delivery date? I have been looking for a case than has separate holes for the camera/flash and have been we waiting for that one to come into stock.
Click to expand...
Click to collapse
told me dec 27-31 expected delivery. if it shipped today as i got the email from amazon saying it did. maybe it be here before christmas!!!
I am waiting an Hard Case from eBay that costs 2.99$. Just to use on some ocasions.
Here is it: http://www.ebay.com/itm/36080797764...eName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Damieok said:
It would be great if you updated on how this goes, is there any estimated delivery date? I have been looking for a case than has separate holes for the camera/flash and have been we waiting for that one to come into stock.
Click to expand...
Click to collapse
I'll jump in here and say that I've had several Ringke cases and they've all been great. They are one of my favorite case manufacturers, and they're fairly inexpensive.
Edit: just ordered a clear case as well. I was going to get black, but decided I want either the red or blue shell, so the clear case will show it off.
Yes I think they has stock in clear maybe not in the other colors
Sent from my XT1034 using XDA Premium 4 mobile app
My ringke slim case came in
Case looks nice doesn't feel or look cheap.
Doesn't add bulk but does make the phone little slippery in the hand
Like how it came with a screen protector and when installed don't add any glare or interfere with the quality of the screen.
And has table lay so if you lay it on the table it won't be touching the screen
And cutoff for the power button and volume button still are easy to press and don't not interfere.
Overall 9/10
Sent from my XT1034 using XDA Premium 4 mobile app
......
Sent from my XT1034 using XDA Premium 4 mobile app
Would love to see some pics of the case mate naked tough and otterbox commuter. There must be someone out there with them to take some pics or video.
Sent from my GT-P3113 using Tapatalk 2
There is already quite some choices and availability for Moto G cases, but none of those I can find on the Internet cover the two weak points of a phone, especially this one: the side buttons AND the screen.
The Ringke look like they are the most reliable cases, so are some rubber cases that wrap the phone in the bumper with cutouts for the Volume and Power/lock buttons but... it doesn't protect the screen as much as the flip shell does but the flip shell leaves the definitely flimsy buttons unprotected.
Isn't a case that cover both weaknesses common for other older models ?
Just ordered one of these as an extra for the nillkin one i already have on. Really happy with the nillkin for now.
But this is ridiculously cheap! 5.4 usd!! Shipped!
http://m.ebay.com/itm?itemId=190993471688
Hope it turns out to be useful though
Sent from my Nexus 5 using xda app-developers app
rahulmaheswari said:
Just ordered one of these as an extra for the nillkin one i already have on. Really happy with the nillkin for now.
But this is ridiculously cheap! 5.4 usd!! Shipped!
http://m.ebay.com/itm?itemId=190993471688
Hope it turns out to be useful though
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
I have this. Got it from a different seller. I actually ordered 2 for my phones. One of them is perfect. No issues, looks invisible once it's applied. The other has the same defect as the original batch or Spigen Glas.tR. Where it has a bubble in the lower right hand corner.
I contacted the seller and I'm awaiting a replacement.
Overall it's very nice, way smoother than any plastic PET film. The oleophobic coating isn't as good as the one on the GG3. It's more like the film on original GG (Takes a few more wipes on your pant leg to get rid of the finger prints). Overall for $7 I paid for mine I'm happy with it.
Should come with alcohol prep pad and lint free cloth. Instructions keep referencing Glas.tR. Its not a clone of the Glas.tR since it has cut outs for the camera and sensors.
rahulmaheswari said:
Just ordered one of these as an extra for the nillkin one i already have on. Really happy with the nillkin for now.
But this is ridiculously cheap! 5.4 usd!! Shipped!
http://m.ebay.com/itm?itemId=190993471688
Hope it turns out to be useful though
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Different link? that one doesnt work on computers. Or mine at least
*Nvm found it via item number and it looks like its from China. I dont like waitingl.. lol
Nocturnal86 said:
Different link? that one doesnt work on computers. Or mine at least
*Nvm found it via item number and it looks like its from China. I dont like waitingl.. lol
Click to expand...
Click to collapse
I'll give it a shot for $5, Thanks