Related
Hi,
I am looking for cable that I could use to connect my JasJar PDA (USB mini port) with GPS (USB mini port) and car lighter. This cable should transmit data between PDA and GPS. Also it should power PDA and GPS from car lighter socket. Look at attached picture for better explanation.
Do you know where I could buy it?
Best regards
Marek S
Cześć!
Myśle, że nawet jeśli masz taki kabel, to będziesz mieć problem. And there my Polish runs out!
(trans: Even if you had such a cable, you'd still have a problem).
Or at least I would assume so... Even if you made a mini usb to mini usb cable with power spliced in from a car adapter (easy enough to do after all) then you would still have the problem of persuading your pda to use the usb connection for rx/tx gps data, which I would have thought was a drivers problem...
Anyone?
Hi,
As I read on some forum this device can work as USB host and WM 5.0 has many drivers also for GPS devices. Is that true? If it is, problem how JasJar will communicate with GPS is not a problem. The problem for me is that I cannot make that cable myself and I need sombody help.
Best regards
Marek S
Sadly, this device cannot act as a USB host... I am frankly disappointed that they decided not to implement it, but I guess there always has to be a reason to upgrade to the next model!
I'm afraid I don't know about WM05's support for GPS devices connected via USB, although I think I have read in other threads that people have tried without success to connect GPS receivers to their Universals.
I bought a BT gps receiver to use with mine, and am hoping to cover the cost of that when I sell my IIs, wired gps receiver, cradle etc. One thing that attracted me to the Holux that I bought is that it can apparently be used as a gps mouse if you buy the optional cable - a usb to usb mini that has a curious small plastic junction box halfway along it's length. I assume that there is some form of jiggery pokery going on in there (like swapping the 2 data lines or grounding something ) because I certainly can't connect my receiver to a laptop with a normal usb to usb mini cable.
Sorry I can't help more, but I think you may be stuck unless you can find someone locally who'll chop up some cheap cables for you to experiment with... :?
I am wondering whether if you got a Minu USB to USB B, plugged it into a cheap powered/unpowered hub, the to the GPS would it work?
If it is a cheap hub, when powered, it may have the 5V rails joined, in which case the power might run back to the universal.
However, before testing this, it would be wise to test that the USB can work with teh GPS on its own. If you do not have a mini USB A to mini USB A already and tested (I couldn't see such cables) then www.maplin.co.uk could supply you with the following, which would/should provide you with a connection if it is at all possible:
mini USB A to USB A (Standard with universal surely?)
Female USB A to USB B
Female USB B Female USB A
USB A to mini USB A (Standard with universal)
That is a lot of cables
This cable should transmit data between PDA and GPS.
WHy on earth would you want that?
JaySea said:
This cable should transmit data between PDA and GPS.
WHy on earth would you want that?
Click to expand...
Click to collapse
Once you can prove that the PDA can connect to the GPS that way (one of the posters was not particularly positive on that) then the addition of the HUB would allow you to put the power onto the cable.
Gareth
kabel...
Hi Marek,
This is not going to work for DATA but this kind of cable may work to charge both JasJar and BT gps. Log in to www.allegro.pl , find covox in "szukaj użytkownika" go and buy the BT gps with the mini usb port (like G-Space GS-R238) and solder in second usb mini cable into the included car charger .
thats all...
This should charge both....ordered one and am waiting for it, doubt it'll sync though.....
http://cgi.ebay.com/Motorola-Blueto...yZ108660QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Quite a lot PDAs supporting USB-host, but for only a few an adapters or appropriate cables from the manufactures are available.
As these devices support USB-Slave as well I would like to know if there's a way to convert the USB male connector (used as slave e.g. for sync with the PC) to a USB-host female in order to connect accessories (keyboard, mass-storage devices...).
According to wikipedia the configuration of the pins shouldn't differ too much for slave and host mode.
Pls. see attachement, that's what I found regarding this question. It's a picture showing a similar configuration (as new user I'm not allowed to post external links, thanks to ab21cn
from xdaflameusers)
But it's a male-to-male converter and furthermore a converter from "big usb" to micro (mini?) usb. As there're already standard converters for the different sizes of USB I would like to start with the biggest size and to buy the appropriate converter as needed.
Does anyone has a circuit diagram or any other idea for such a generic converter?
Try adapters made for Nokie N800 series
I had a Nokia 770 a couple of years ago. It came as USB device only with mini USB connector, but online I found how to upgrade the software to USB host, and use a cable adapter. The plans I found online involved a 9V battery and 5V voltage regulator inside a metal case (they used a penguin mints case). I built one of those, even using the penguin mints case, and it worked fine.
I have never seen any indication that my HTC phone would work the same, but I am guessing that it might, if the USB host drivers are available.
Google couldn't locate the penguin mints-based converter I originally found, but this seems to be a similar circuit diagram.
Edit: Found it!
thx
thanks for the links. but i'm a little bit afraid of connecting something to my pda which has an own power supply, the risk of a burn-out is given. i've got a nautiz x5 with 4400mA battery which should have enough energy to supply usb-power to connected devices.
I think I'm going to contact the manufacture of my device, maybe this works for me, but a generic adapter would be of use for anyone.
the chips used for usb should be of the shelf as i don't think each manufacture develops an own logic for usb... but this doesn't imply that the cabeling is standard too.
what the heck makes manufactures providing features in their products which the users can't take advantage of?
do you mean using keyboards and so on on ppc?
because it's so simple if ur phone has a mini usb plug (the one u plug the power adapter into). i found a cable that plug into that and plugs a normal usb cable in on the other side and blam been typing on my phone using a desktop keyboard. it depends how much power your device requires however. i wish there was some software to feed a video line out so i could watch videos on pair of vizors that wud be rad. all i can find is a mini-sd card converter now whats the point of that. guess i need an itouch
yes
primary i want to connect usb mass storage devices to my pocket pc. gamecontroller or keyboard would be a good thing too.
my devices doesn't have a standard usb plug, the only thing i got is a adapter from the properitary plug of my device to standard usb male connector, but this is meant for usb-slave use only.
the underlying qeustion is, if there's a way to convert usb-slave to usb-host using the same pins. if it needs an additonaly pin then i don't see a way to convert it as i don't know anything about the pins cableing of my properitary plug.
a week ago i found an adapter which was able to convert the male usb to another male usb... but it didn't work.
the problem is compareable to datatransfer between two pcs via usb - it's possible, but only using properiatry hardware and drivers...
so i think there's no way to solve this problem in a generic way.
out of interest, do you already have windows CE drivers for the device to act as a host and mass storage? I wouldnt mind them if you can point me somewhere..
how to check if my htc (touch2) ca use usb host?
I have a Tilt 2, had it since last March. I've had to have it replaced twice already due to the USB jack getting to the point where it no longer functions except to charge, it won't connect via cable to the pc, nor will it work with the multi-function adapter provided at purchase by HTC.
Is it dangerous/wrong to use after-market chargers/adapters/standard usb cables with the phone??? Am I damaging the usb port by using car chargers/wall chargers, etc that I got from ebay, or is this just a matter of bad design?
It isn't. It looks different, but its not. I believe its ONLY notched like that because not only is that port a USB port, but it also has a few extra 'wires' for connecting a headset to it. (via the HTC adapter)
Of course, the corporate answer is.. Yes using a non HTC Power Adapter could damage your TP2. But unofficially, I doubt it.
I've stopped buying over priced chargers for my phones and will by any Mini-USB charge that I can find. Most will work. The voltage does not matter anymore since USB is a set standard, and any modification to the voltage would not comply to the USB standard, and it wouldn't be USB then.
I've had the same issue with my TP2 (and with the HTC Wing I had before). Check the power adapters itself. I have a RAZR charger I've been using for years, and I think the plug itself has just about had it.
Also take some canned air to the USB port on the phone (while it is powered off and battery removed) and try to remove debris from the USB port. The minuscule little piece of dust could cause a bad connection. Electronic cleaner works better at this. (its LIKE canned air but contains alcohol-based cleaner in the "air". It's available at Radio Shack.) This fixed the problem I was having with my Wing.
And finally, it may just be time for a new phone. The ports just plain wear out from daily plugging and unplugging that adapter in. One slight bend and the port is all out of alignment.. (does it wiggle instead of being a firm connection when you plug in the charger?)
This is why I am waiting for the day these induction charges are standard in phones.. No more power adapters!
I just use a normal USB plug for mine. I don't even fool with the one it came with so I don't get that one confuse with something else. They only notched it like that to make a buck, I would guess.
If you are trying to use Mini USB headphone, only the ones made by HTC will work as it has 11 pins. Standard Mini USB has only 5 pins.
I bought these on ebay. The HDMI is short but worked but when I connect both cables to lapdock, the USB is not being recognized so the keyboard/mouse is not working. I want this just to act as an extension so I can use full lapdock abilities with cables. Any idea what's going on (cable charges on plug but does not charge on lapdock)? Maybe someone has better usb cables.
fixed the link:
http://www.ebay.com/itm/29059482363...X:IT&_trksid=p3984.m1497.l2649#ht_3046wt_1508
http://www.ebay.com/itm/36042990934...X:IT&_trksid=p3984.m1497.l2649#ht_2333wt_1010
links appear to be broken...
From your title I've been looking for these (or similar) cables for a long time and have been unsuccessful. However I have yet to try them.
Fixed the link
http://www.ebay.com/itm/29059482363...X:IT&_trksid=p3984.m1497.l2649#ht_3046wt_1508
http://www.ebay.com/itm/36042990934...X:IT&_trksid=p3984.m1497.l2649#ht_2333wt_1010
i don't think it will work either way, tried a few things like this with no avail.
why wouldn't they? Cheap build quality that doesn't include the data wires? Hell I'll be willing to splice two cables together to get our desired effect, the only problem is that cords with a female micro usb are incredibly hard to come by
So that is what you think it is? No data on the usb cables.
Sent from my MB860 using XDA App
mamoranto said:
So that is what you think it is? No data on the usb cables.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
the only reason that is my suspicion is because there are many "charging" products out there that don't really need data. Why there would be a need for such a small charging extension cable is beyond me, but it's the only solution I can think of, but I have no way of confirming or denying it either. The ebay descriptions seem to imply that the data wires are there, but we all know how reliable ebay can be...
Another idea I had was that it might be sensing the resistance in the cable, since, if I remember correctly, that was how some think/though the car dock puts the atrix into car mode without a magnet as is/was commonly used. Again these are just ideas.
Or the cable is just so poorly made that it's defective...I honestly have no clue
Has anyone got full lapdock capabilities using extension cables? I can only get the screen working and not the mouse and keyboard.
The HDMI extender was the hard one to find. There are other micro USB extenders out there, theoretically with all wires connected....
http://www.usbfirewire.com/uextendmicrob.html
Kind of makes me wish i hadn't hacked up my lapdock to work with the Otterbox
Where did you get your HDMI extender? I got mine from All4Cellular but it's quite short. Will have to get another HDMI one if the usb cable you recommended works.
mamoranto said:
Where did you get your HDMI extender? I got mine from All4Cellular but it's quite short. Will have to get another HDMI one if the usb cable you recommended works.
Click to expand...
Click to collapse
If you're asking me, i didn't. I was referring to the ebay link in the third post.
grevedan said:
The HDMI extender was the hard one to find. There are other micro USB extenders out there, theoretically with all wires connected....
http://www.usbfirewire.com/uextendmicrob.html
Kind of makes me wish i hadn't hacked up my webtop to work with the Otterbox
Click to expand...
Click to collapse
before I read that post, I was looking around the forums and the web yesterday well into the night. here are some of the things I've found that might be relevant to everyone (and it might possibly be cheaper, though more diy).
Micro USB stuff:
I have no idea why this exists http://www.dealextreme.com/p/micro-...r-cable-for-blackberry-9900-black-30cm-107901
I have no idea why this only has 4 pins http://www.sparkfun.com/products/9614
http://www.sparkfun.com/products/10031
mamoranto said:
Where did you get your HDMI extender? I got mine from All4Cellular but it's quite short. Will have to get another HDMI one if the usb cable you recommended works.
Click to expand...
Click to collapse
Here's what I am thinking about doing:
http://www.ebay.com/itm/140626354628#ht_2821wt_1177 or http://www.ebay.com/itm/Micro-HDMI-...ultDomain_0&hash=item415eac6dc0#ht_2821wt_980
http://www.amazon.com/HDMI-Female-M...YPB4/ref=sr_1_2?ie=UTF8&qid=1329854686&sr=8-2
then the hdmi cable that came with our phone:
http://www.amazon.com/Motorola-Stan...QTA8/ref=sr_1_8?ie=UTF8&qid=1329854856&sr=8-8
The HDMI certainly looks like it may work but the reason I didn't buy that product from ebay a few weeks ago was because it was $50. Now miraculously, it's only $6. Maybe I'll get that if the USB cable I just bought that was suggested works a few posts back.
misiek93 said:
why wouldn't they? Cheap build quality that doesn't include the data wires? Hell I'll be willing to splice two cables together to get our desired effect, the only problem is that cords with a female micro usb are incredibly hard to come by
Click to expand...
Click to collapse
This micro usb extension cord explicitly states that all 5 wires are connected (compatible with droid bionic for the purpose of docking with a case on the phone):
http://www.ebay.com/itm/Micro-USB-E...395?pt=LH_DefaultDomain_0&hash=item335d13272b
I bought the HDMI extension cable and the USB cable above. I have a lapdock so I'll post if it works.
everything asked/answered in here is already covered in the original thread:
http://forum.xda-developers.com/showthread.php?t=1376679
robrj said:
This micro usb extension cord explicitly states that all 5 wires are connected (compatible with droid bionic for the purpose of docking with a case on the phone):
http://www.ebay.com/itm/Micro-USB-E...395?pt=LH_DefaultDomain_0&hash=item335d13272b
I bought the HDMI extension cable and the USB cable above. I have a lapdock so I'll post if it works.
Click to expand...
Click to collapse
The HDMI cable seems to work. On the lapdock, with just the HDMI cable hooked up, it functions like it was it's an entertainment center.
The USB cord will need to be modified a little bit. I can't get it to seat right on the USB jack of the dock. I'll need to shave it down a bit as it doesn't sit down snugly.
robrj said:
The HDMI cable seems to work. On the lapdock, with just the HDMI cable hooked up, it functions like it was it's an entertainment center.
The USB cord will need to be modified a little bit. I can't get it to seat right on the USB jack of the dock. I'll need to shave it down a bit as it doesn't sit down snugly.
Click to expand...
Click to collapse
I ordered the USB cable and experience this same problem, though I am waiting for my hdmi parts to come in (by April 6th I should have all my parts...). The cable itself works flawlessly as a micro usb extension cable when connecting it to the computer.
again as mentioned in the other thread, you want to be careful with the 5v coming out that micro hdmi port. for connecting back to your phone would be no issue, as the phone charges using this voltage, but hooking the lapdocks micro usb up to a host device probably wont appreciate the 5v coming back up the cable, where normally the usb device would be pulling power from said host, not providing it.
one suggestion is to just clip the red wire inside your micro usb cable/adapter.
btw the adapters i use do fit snugly side by side, without modification.
I've been following this thread for a little while now, and I wanted to share something I found.
I was looking at the Motorola Travel Webtop adapter. And I was curious to see whether it could be tweaked to suite our needs. I naively thought/hoped that I could flip the connectors in the device to make a small adapter to connect the Atrix to newer Lapdocks. Unfortunately as you can see in the pictures below (sorry not enough posts to link to the pictures) the two connectors are connected via a PCB not wires or a ribbon cable. Although I still have high hopes that I can de-solder the HDMI and USB connectors, and use a small length of flat ribbon cable to connect them and then re-positions the connectors in the case, to build a micro adapter to use the Atrix on the newer Lapdocks. Should this fail this will at least prevent others from making the same mistake, and solve the mystery of what's really inside the Webtop Travel adapter.
Do any one know if this Micro HDMI Cable would work for Lapdock.
http://www.ebay.com/itm/1-Feet-HDMI...s_Adapters&hash=item416612cecb#ht_1149wt_1187
Description says for Asus tf201 MEMO ME171.
I believe all Cables are standard. Can this used to Atrix 4g with Lapdock?
I have otterbox case for Atrix and don't want to Remove cover everytime to plug in Lapdock.
Hi there,
So my original OnePlus data/charging cable is damaged and I have to put it in a certain position to get it to charge my phone. I had a spare but my friend has left it at his parents house and I don't think I'm going to get it back. I've been using the short charge cable that came with my OnePlus power bank to charge my phone.
I tried some old micro USB cables that I had lying around from older devices. They work for charging but they don't seem to let me connect my phone to my PC.
I also do not like the style of USB head that OnePlus put on their official cables, the plastic tab with the contact points does not sit firmly in the USB ports on my computer.
I want to get a couple of replacement USB cables for charging and data transfer but I don't know which cables would work with my OnePlus One. I would like to avoid an official OnePlus Micro USB cable as the USB connector is too loose.
Can anyone suggest a cable for me to get? I would like it to be able to charge at full speed and also work with USB file transfers and have a normal USB head on the cable so it sits firmly in the port.
I just don't want to order a wire and find out it doesn't work with the phone. I seem to remember my phone has always been picky with USB cables and I do have some driver issues that may be caused by the wire type.
Thanks,
donk165
donk165 said:
Hi there,
So my original OnePlus data/charging cable is damaged and I have to put it in a certain position to get it to charge my phone. I had a spare but my friend has left it at his parents house and I don't think I'm going to get it back. I've been using the short charge cable that came with my OnePlus power bank to charge my phone.
I tried some old micro USB cables that I had lying around from older devices. They work for charging but they don't seem to let me connect my phone to my PC.
I also do not like the style of USB head that OnePlus put on their official cables, the plastic tab with the contact points does not sit firmly in the USB ports on my computer.
I want to get a couple of replacement USB cables for charging and data transfer but I don't know which cables would work with my OnePlus One. I would like to avoid an official OnePlus Micro USB cable as the USB connector is too loose.
Can anyone suggest a cable for me to get? I would like it to be able to charge at full speed and also work with USB file transfers and have a normal USB head on the cable so it sits firmly in the port.
I just don't want to order a wire and find out it doesn't work with the phone. I seem to remember my phone has always been picky with USB cables and I do have some driver issues that may be caused by the wire type.
Thanks,
donk165
Click to expand...
Click to collapse
Using 1+'s original cable is always the best get.
donk165 said:
Hi there,
So my original OnePlus data/charging cable is damaged and I have to put it in a certain position to get it to charge my phone. I had a spare but my friend has left it at his parents house and I don't think I'm going to get it back. I've been using the short charge cable that came with my OnePlus power bank to charge my phone.
I tried some old micro USB cables that I had lying around from older devices. They work for charging but they don't seem to let me connect my phone to my PC.
I also do not like the style of USB head that OnePlus put on their official cables, the plastic tab with the contact points does not sit firmly in the USB ports on my computer.
I want to get a couple of replacement USB cables for charging and data transfer but I don't know which cables would work with my OnePlus One. I would like to avoid an official OnePlus Micro USB cable as the USB connector is too loose.
Can anyone suggest a cable for me to get? I would like it to be able to charge at full speed and also work with USB file transfers and have a normal USB head on the cable so it sits firmly in the port.
I just don't want to order a wire and find out it doesn't work with the phone. I seem to remember my phone has always been picky with USB cables and I do have some driver issues that may be caused by the wire type.
Thanks,
donk165
Click to expand...
Click to collapse
Actually, yes. I've had my One for more than 2 years now and changed the cable as well. There are actually 2 cables I can recommend as of now - from Nillkin and from Aukey. Both are sturdy, solid, fast and just do their job as good as they should. Aukey, however, is much better in one aspect: it's longer. 2m vs 1.2m. Aaaaand it still charges with full 2.1A current, which, in my opinion, is pretty awesome. Both of them are also pretty cheap - you can buy them for ~ 5$ - just search for them on Aliexpress
I had good experiences with Sharkoon and LogiLink cables.
I've got the 5 pack from Anker and it's doing well. On a test it had good performance and was very cheap on Amazon.
Item model number: AK-B7103011
ASIN: B00Q88RI0S
You should get USB cable with Micro USB
Thanks for the replies, I guess my main concern was getting a USB cable that works for data transfer. I ended up ordering a triple pack of Aukey USB's. 2 x 1m and 1 x 2m cables. The description said that they work with 2.1a chargers and USB 2.0 data transfer which is what I need.
Thank you for the suggestions !
Can you please share the link of the purchase
donk165 said:
Thanks for the replies, I guess my main concern was getting a USB cable that works for data transfer. I ended up ordering a triple pack of Aukey USB's. 2 x 1m and 1 x 2m cables. The description said that they work with 2.1a chargers and USB 2.0 data transfer which is what I need.
Thank you for the suggestions !
Click to expand...
Click to collapse
Can you please share the link of the purchase. I also need one to buy and can't find the best option. Thanks in advance.?
tilakdebnath said:
Can you please share the link of the purchase. I also need one to buy and can't find the best option. Thanks in advance.
Click to expand...
Click to collapse
https://www.amazon.co.uk/AUKEY-USB-...d=1488165703&sr=1-3&keywords=aukey+usb+3+pack
Here you go, that's the exact pack I bought.
Is this as good as the original cable for charging & data transfer
You can try BlitzWolf reversible micro usb cable. It's able to charge with full 2A current and most funny, it's really reversible, so it does not matter which side you connect to your phone (unlike normal micro usb connector).
tilakdebnath said:
Is this as good as the original cable for charging & data transfer
Click to expand...
Click to collapse
Yeah, it charges quickly, and data transfer works great. I haven't benchmarked it or anything but its doing its job, and the 2m cable is great! It still charges quickly despite being longer. The micro USB head has a satisfyingly click when plugged in and the USB head is normal and works well.
donk165 said:
Yeah, it charges quickly, and data transfer works great. I haven't benchmarked it or anything but its doing its job, and the 2m cable is great! It still charges quickly despite being longer. The micro USB head has a satisfyingly click when plugged in and the USB head is normal and works well.
Click to expand...
Click to collapse
Thanks a lot !!☺