I root my sprint sg3 with root66_SPR_L710VPBLJ7, then with rootkeeper update to mb1 and now md4. I have a stock rom and stock recovery. Is there any way to flash Odex Hotspot mode without having to change my stock recovery.
Unzip the flashable he provides, then copy the files to /system using a root explorer and then reboot
CNexus said:
Unzip the flashable he provides, then copy the files to /system using a root explorer and then reboot
Click to expand...
Click to collapse
Thanks CNexus, it worked great, all original.
:good:
Yup :thumbup:
Just a small note, that only worked because he used the stock files and you're on stock rooted and not a custom rom
On any other rom it probably would've given you bootloops
Related
Where is it? I can't find a .zip file for the true stock not repacked??? frusutrating me lol defiantly need .zip not .tar
You need to install it first and use auto root package to remove the root access. Then it purely becomes the 'Stock'.
kobridge said:
You need to install it first and use auto root package to remove the root access. Then it purely becomes the 'Stock'.
Click to expand...
Click to collapse
huh? im just asking for a flashable .zip that would no longer give me recovery but pure stock kernel.. i don't want to lose root access... lol I use mobile odin to flash back to repacked CWM kernel's when i plan on flashing again... but i can't find a stock .zip kernel for FC07
jbrawley1 said:
Where is it? I can't find a .zip file for the true stock not repacked??? frusutrating me lol defiantly need .zip not .tar
Click to expand...
Click to collapse
nvm found it
Ahh!
FC07 stock kernel is in here -http://forum.xda-developers.com/showthread.php?t=1539581 Check out the second post and download the kernel b2) odin file. You can mobile odin this file and your kernel goes back to stock.
I want to root my phone, and was wondering if the autoroot located on this site will work with the latest update of ICS that sprint pushed.
Will this root allow the wifi tether to work, and get rid of the sprint bloat wear?
acefilleddreams said:
I want to root my phone, and was wondering if the autoroot located on this site will work with the latest update of ICS that sprint pushed.
Will this root allow the wifi tether to work, and get rid of the sprint bloat wear?
Click to expand...
Click to collapse
yes the FF18+ root one click odin is the OTA update with root added. Make sure you get a safe kernel/recovery. (flash via odin or mobile odin) Yes there are a few wifi tether apps that you can download, since most need root access to run. once you have that look for caukulin's bare rom converter. it will remove all the bloat ware and put in a removed apps folder on your sd card in case you want anything back. (Flash it thru CWM/recovery) Or there is a list on here that has all the apps you can remove using root explorer or equivalent app. system/apps is the file location.
FF18 autoroot: http://forum.xda-developers.com/showthread.php?t=1721229
Agat63 kernel: http://forum.xda-developers.com/showthread.php?t=1767421
Bare rom converter/list of removed apps in the first post: http://forum.xda-developers.com/showthread.php?t=1332837
g_ding84 said:
yes the FF18+ root one click odin is the OTA update with root added. Make sure you get a safe kernel/recovery. (flash via odin or mobile odin) Yes there are a few wifi tether apps that you can download, since most need root access to run. once you have that look for caukulin's bare rom converter. it will remove all the bloat ware and put in a removed apps folder on your sd card in case you want anything back. (Flash it thru CWM/recovery) Or there is a list on here that has all the apps you can remove using root explorer or equivalent app. system/apps is the file location.
FF18 autoroot: http://forum.xda-developers.com/showthread.php?t=1721229
Agat63 kernel: http://forum.xda-developers.com/showthread.php?t=1767421
Bare rom converter/list of removed apps in the first post: http://forum.xda-developers.com/showthread.php?t=1332837
Click to expand...
Click to collapse
do flash the kernal before I run the autoroot? sry if that is obv
acefilleddreams said:
do flash the kernal before I run the autoroot? sry if that is obv
Click to expand...
Click to collapse
no flash auto root. then kernel.
I'm trying to flash Clockwork Mod onto a friend's TMO S3 with Odin. I was able to do this successfully with my TMO S3, both are running UVALH2.
Odin says the flash was successful, I restart the phone and try to boot into the custom recovery but it keeps taking me to the stock recovery. I tried a few more times with the same results.
Am I missing something?
Try the no tripping the flash counter method found in the stickies found in the dev section.
You should be able to get around your problem with this method.
Sent from my SGH-T999 using xda premium
kpizzle said:
I'm trying to flash Clockwork Mod onto a friend's TMO S3 with Odin. I was able to do this successfully with my TMO S3, both are running UVALH2.
Odin says the flash was successful, I restart the phone and try to boot into the custom recovery but it keeps taking me to the stock recovery. I tried a few more times with the same results.
Am I missing something?
Click to expand...
Click to collapse
The UVALH2 update includes two files that will overwrite recovery every reboot
You can fix this issue by renaming the following files using root explorer
Rename:
/system/recovery-from-boot.p to /system/recovery-from-boot.p.bak
and
/system/etc/install-recovery.sh to /system/etc/install-recovery.sh.bak
Once you've done that, reflash CWM through ROM Manager and recovery will stick
ingenious247 said:
The UVALH2 update includes two files that will overwrite recovery every reboot
You can fix this issue by renaming the following files using root explorer
Rename:
/system/recovery-from-boot.p to /system/recovery-from-boot.p.bak
and
/system/etc/install-recovery.sh to /system/etc/install-recovery.sh.bak
Once you've done that, reflash CWM through ROM Manager and recovery will stick
Click to expand...
Click to collapse
You are the man!!!
there's a little "thanks" button on my post.. feel free to click it
and no problem, glad to help!
ingenious247 said:
The UVALH2 update includes two files that will overwrite recovery every reboot
You can fix this issue by renaming the following files using root explorer
Rename:
/system/recovery-from-boot.p to /system/recovery-from-boot.p.bak
and
/system/etc/install-recovery.sh to /system/etc/install-recovery.sh.bak
Once you've done that, reflash CWM through ROM Manager and recovery will stick
Click to expand...
Click to collapse
So I just realized something. I can't even attain root access, how can I edit these files?
Can flash mrRobinson's LH2 w/root and you will have full LH2 stock with root. It is an Odin package and only flashes /system partition so no /data loss.
kpizzle said:
So I just realized something. I can't even attain root access, how can I edit these files?
Click to expand...
Click to collapse
Flash CWM through Odin, but turn off the auto reboot in Odin
That way it won't overwrite it
Then power down when it's done, and boot into recovery, Flash Superuser
Will i still be able to receive JB OTA update when the time comes, if i rename these two files and flash CWM through ROM manager?
arthaz28 said:
Will i still be able to receive JB OTA update when the time comes, if i rename these two files and flash CWM through ROM manager?
Click to expand...
Click to collapse
No, you cannot receive OTA updates unless you are on stock recovery.
So you would have to Odin back to stock before accepting the update, which is simple enough.
Or just wait for someone to take the update and make a flashable zip file which will happen pretty quickly once the OTA comes out
ingenious247 said:
No, you cannot receive OTA updates unless you are on stock recovery.
So you would have to Odin back to stock before accepting the update, which is simple enough.
Or just wait for someone to take the update and make a flashable zip file which will happen pretty quickly once the OTA comes out
Click to expand...
Click to collapse
You don't need stock recovery for any reason at all. Not anymore.
I never said you needed it. I was answering the question that was asked.
And if you don't want to flash a modified version of a stock ROM, then yes, you do need stock recovery. Some of us don't like deodexed ROMs and care to choose what we debloat.
ingenious247 said:
I never said you needed it. I was answering the question that was asked.
And if you don't want to flash a modified version of a stock ROM, then yes, you do need stock recovery. Some of us don't like deodexed ROMs and care to choose what we debloat.
Click to expand...
Click to collapse
Thank you sir!
After I was rooted, I created a backup using CWM. So, if the update comes out, I can just flash my backup stock ROM again using CWM rand I should be able to receive the OTA update, right?
(sorry I am a noob and still learning about this whole rooting, custom ROM, etc stuff)
arthaz28 said:
Thank you sir!
After I was rooted, I created a backup using CWM. So, if the update comes out, I can just flash my backup stock ROM again using CWM rand I should be able to receive the OTA update, right?
(sorry I am a noob and still learning about this whole rooting, custom ROM, etc stuff)
Click to expand...
Click to collapse
No, you would have to Odin back to stock which would overwrite CWM with stock recovery. If you're not familiar with Odin read up on it, it's really easy to use. Just make sure you get it from the correct thread for your phone model and you'll be fine.
Sent from my SGH-T999 using xda premium
Hi,
I recently bought the Samsung Galaxy S3 on T-Mobile, to replace my Motorola Droid X on Verizon. Love the new phone, but miss my root capabilities - aka there's a bunch of bloat. There's an OTA not being forced for 4.1.1, but when I tried to root that, I soft bricked and got stuck in a boot loop at the pulsing Samsung. I grabbed ODIN and was able to push the stock 4.0.4 back into it and get it working again, baseband T999UVLH2, Kernel 3.0.8-925100, build IMM76D.T999UVALH2. Is there a way to root this phone, or a stock rooted ROM I could push up with ODIN?
I'm not looking to load custom ROM's, just have some of the abilities I had on my DX when it was rooted and get rid of some of the stock crap that I don't need.
I originally tried to do this with Samsung Galaxy S3 Toolkit v6.0, and soft bricked the phone. I followed the directions online, and did it as instructed, but yeah. Any help would be greatly appreciated.
All you need to root is the touch 6.0 clockwork mod recovery tar file which is available on xda as zip file and the odin version 3+ and follow instructions thats all thats needed to root, make sure you also put the superuser app inside the root of your sd card meaning connect your galaxy s3 to computer then open the root sd card and put it inside there, i believe there is a clockwordmod touch that already comes with superuser so you may not have to worry about putting superuser in root. here i'll grab links for you now. u dont checkmark anything on odin except select pda and browse for the tar file. Here is guide for your device with download links.
The clockworkmod touch recovery version is by far best and always works well with almost all roms.
I would also recomend you use liquidsmooth rom or if you want to test out the new android 4.2 cm but camera doesn't work on 4.2 cm10.1 now however it's a very nice custom rom
Btw, make sure you flash the superuser.zip file that you placed in your sd card while you are in clockwork mod recovery otherwise you wont comlete the root. to get into cwm you gotta hold volume up home button and power button at same time.
http://www.theandroidsoul.com/how-to-install-cwm-touch-recovery-6-0-for-t-mobile-galaxy-s3/
Or even easier you can go here:
http://forum.xda-developers.com/showthread.php?t=1949687
[Firmware/OTAs] T999(V) Official, Leaked & Root66 FW & OTA Updates!
Just flash the root66 udljva file and it is just pure stock prerooted. Just follow the doc's instructions and all will be good.
Sent from my galaxy nexus using Tapatalk 2
rawdaddymagraden said:
Or even easier you can go here:
http://forum.xda-developers.com/showthread.php?t=1949687
[Firmware/OTAs] T999(V) Official, Leaked & Root66 FW & OTA Updates!
Just flash the root66 udljva file and it is just pure stock prerooted. Just follow the doc's instructions and all will be good.
Sent from my galaxy nexus using Tapatalk 2
Click to expand...
Click to collapse
Thanks to both of you, I'm rooted, exactly the way I wanted to be. I couldn't get CWM to flash in stock recovery, nor could I get Root66 to flash in recovery, so I just pushed it with Odin. All I need to do now is get CWM Touch on it, and I'll be set. I'm reinstalling my root apps as we speak.
Thanks again!
Odin cf auto root is the quickest and simplest.
seattlestexan said:
Thanks to both of you, I'm rooted, exactly the way I wanted to be. I couldn't get CWM to flash in stock recovery, nor could I get Root66 to flash in recovery, so I just pushed it with Odin. All I need to do now is get CWM Touch on it, and I'll be set. I'm reinstalling my root apps as we speak.
Thanks again!
Click to expand...
Click to collapse
Flash cwm via Odin uncheck auto reboot. Then go straight to recovery then reboot. I'd wipe cache and dalvik while in there though.
http://forum.xda-developers.com/showthread.php?t=1809307
[RECOVERY]TWRP 2.3.1.0 touch recovery [2012-10-15]
I have the Clockword recovery and CM 10.1 installed on my Sprint Galaxy S3 running on PagePlus
I would like to flash a Touchwiz rom. Which one can I flash using the Clockword Recovery (lightweight)?
Why is MD4 not flashable using Clockwork?
Thanks.
The official update is NOT flashable.using any custom recovery, custom meaning anything other than stock recovery.
And you can flash any Touchwiz rom with CWM recovery, as the MD4 update is not a ROM. OTAs are not full ROMs on their own, they are collection of files that patch the already existing apps to the most recent versions.
If you want to update to MD4, you simply need flash a custom ROM that is based on MD4 (check the thread titles and OPs), or you can flash freezas stock rooted MD4 ROM, not the update.
CNexus said:
The official update is NOT flashable.using any custom recovery, custom meaning anything other than stock recovery.
And you can flash any Touchwiz rom with CWM recovery, as the MD4 update is not a ROM. OTAs are not full ROMs on their own, they are collection of files that patch the already existing apps to the most recent versions.
If you want to update to MD4, you simply need flash a custom ROM that is based on MD4 (check the thread titles and OPs), or you can flash freezas stock rooted MD4 ROM, not the update.
Click to expand...
Click to collapse
Thanks. That makes a few things clear.
Could you provide any suggestions on a Touchwiz ROM as close to the stock as possible, but preserves root of-course and does not require me to change my recovery. Thanks a lot. (I see you mentioned freezas and I'll try to find it, but just making sure).
kniwor said:
Thanks. That makes a few things clear.
Could you provide any suggestions on a Touchwiz ROM as close to the stock as possible, but preserves root of-course and does not require me to change my recovery. Thanks a lot. (I see you mentioned freezas and I'll try to find it, but just making sure).
Click to expand...
Click to collapse
Right here
http://forum.xda-developers.com/showthread.php?t=1910947
CNexus said:
Right here
http://forum.xda-developers.com/showthread.php?t=1910947
Click to expand...
Click to collapse
Just to be doubly sure, here is what I do:
1) Download the file "MD4_update_FULL_Odex.zip" - The first link in the thread.
2) Place it on SDCard
3) Flash zip from SDCard using the CWM Based Recovery v5.5.0.4
The post in that thread confused me. And I did not want to mess up anything. I especially don't want to update the radio and firmware etc because I've flashed the phone to PagePlus and I'm not sure what that'll do to it.
Flashing Cyanogen any number of times in the past has had no effect.
Thanks agian.
kniwor said:
Just to be doubly sure, here is what I do:
1) Download the file "MD4_update_FULL_Odex.zip" - The first link in the thread.
2) Place it on SDCard
3) Flash zip from SDCard using the CWM Based Recovery v5.5.0.4
The post in that thread confused me. And I did not want to mess up anything. I especially don't want to update the radio and firmware etc because I've flashed the phone to PagePlus and I'm not sure what that'll do to it.
Flashing Cyanogen any number of times in the past has had no effect.
Thanks agian.
Click to expand...
Click to collapse
Yes, that is correct
However, I would suggest to take this opportunity to update your recovery, as you are a full revision behind
The latest CWM can be found here: http://forum.xda-developers.com/showthread.php?t=2151476
Download that recovery zip, boot into recovery, flash the recovery.zip, then go to advanced > reboot recovery, wait a bit for.it to reboot, and then flash the MD4odexed.zip
CNexus said:
Yes, that is correct
However, I would suggest to take this opportunity to update your recovery, as you are a full revision behind
The latest CWM can be found here: http://forum.xda-developers.com/showthread.php?t=2151476
Download that recovery zip, boot into recovery, flash the recovery.zip, then go to advanced > reboot recovery, wait a bit for.it to reboot, and then flash the MD4odexed.zip
Click to expand...
Click to collapse
Git it! Done, updated and everything working perfectly!
Thanks a ton.
kniwor said:
Git it! Done, updated and everything working perfectly!
Thanks a ton.
Click to expand...
Click to collapse
No problem! Dont be afraid to ask or PM me if any more questions/concerns