Otterbox Defender - Galaxy S III Accessories

Hey guys
I just got the otterbox defender for my S3 w/ holster
Is it me or is it a pain to take out and put back the phone into the holster...?
I don't trust that plastic piece to last forever...
Any tips or tricks?

No issues here and i've had mine since they came out. Sometimes it doesn't click and you have to jiggle it to go in. I have my phone face down and my camera on the right.

i'd be more concerned about the stretching rather then the holster issue lol

Snug
Mine is pretty snug too but bearable.

what is this?

http://www.otterbox.com/Samsung-Galaxy-S3-Defender-Series/SAM2-GALAXY-S3,default,pd.html

don't buy it
Defender series is a plastic shield surrounded by a silicon case. also has a belt clip. the problem with defender series for galaxy s3 is the silicon case, it deforms apparently because of heating. I have one, Otter Box has sent me replacement twice, now have the third one, same issue. pretty ugly when silicon case expands losing the shape.

alerioslo said:
Defender series is a plastic shield surrounded by a silicon case. also has a belt clip. the problem with defender series for galaxy s3 is the silicon case, it deforms apparently because of heating. I have one, Otter Box has sent me replacement twice, now have the third one, same issue. pretty ugly when silicon case expands losing the shape.
Click to expand...
Click to collapse
How often do you take the silicone off and on in a week/month?

Ted A said:
How often do you take the silicone off and on in a week/month?
Click to expand...
Click to collapse
The first one I did it very often. I think between 5 and 10 times a month. The second one. I did it once a month for cleaning. Taking care of not forcing it. Same results. It was 3 months since new to warranty replacement. Has been a month since last replacement sent by otter box. I had never take out this silicone case, the same issue is reappearing.
Sent from my GT-I9300 using xda app-developers app

the silicone sucks. i rarely take my case off and it spreads at the corners. i think its from using the holster. the corners that make contact with the holster has a bigger gap. they should've use a different material that's more rubbery.

If your silicone is stretching or not conforming to the corners correctly, boil it in water for 2 minutes or so... Should tighten it back up for a little while.

MiG8GT said:
If your silicone is stretching or not conforming to the corners correctly, boil it in water for 2 minutes or so... Should tighten it back up for a little while.
Click to expand...
Click to collapse
sounds like a temp fix. otterbox should've used different material or a better design from the start.

I agree, they should of used a better product to prevent this annoyance. Anyone else have issues with the clips breaking that hold the plastic portion of the case together?
Sent from my SGH-T999 using xda app-developers app

burntrat said:
the silicone sucks. i rarely take my case off and it spreads at the corners. i think its from using the holster. the corners that make contact with the holster has a bigger gap. they should've use a different material that's more rubbery.
Click to expand...
Click to collapse
The holster isn't the reason for the corner gaps. I never used the holster within 3 warranty replacements for the same issue.
Sent from my GT-I9300 using xda app-developers app

alerioslo said:
The holster isn't the reason for the corner gaps. I never used the holster within 3 warranty replacements for the same issue.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Yeah it's not the main reason, but I noticed the sides that do make contact with the holster has a bigger gap.
Sent from my phone

Related

Otter Box Impact Case for HTC EVO - $9.99/free shipping Newegg (no rebate)

http://slickdeals.net/forums/showthread.php?sduid=0&t=2696941
Great deal, price went up a buck since I ordered last night, but I figured id post incase anyone else was looking for a cheap silicone skin for it.
Free shipping too
http://www.newegg.com/Product/Produ...ction-_-cables-_-na-_-na&Item=N82E16875992368
I have one, I am very unimpressed with it. It fits way too loosely to be usable for me. I put it one once when I first got it, and it's been collecting dust (a lot!) ever since.
_MetalHead_ said:
I have one, I am very unimpressed with it. It fits way too loosely to be usable for me. I put it one once when I first got it, and it's been collecting dust (a lot!) ever since.
Click to expand...
Click to collapse
It fits loosely because it is missing the clip on plastic backing. I have both and it is awesome. The inner part is the silicone while a hard plastic holds the entire EVO.
Sent from my PC36100 using XDA App
Leoisright said:
It fits loosely because it is missing the clip on plastic backing. I have both and it is awesome. The inner part is the silicone while a hard plastic holds the entire EVO.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
There is no hard plastic piece for the Impact case...
Sent from my PC36100 using XDA Premium App
JustRuin said:
There is no hard plastic piece for the Impact case...
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
Leoisright said:
It fits loosely because it is missing the clip on plastic backing. I have both and it is awesome. The inner part is the silicone while a hard plastic holds the entire EVO.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
_MetalHead_ said:
I have one, I am very unimpressed with it. It fits way too loosely to be usable for me. I put it one once when I first got it, and it's been collecting dust (a lot!) ever since.
Click to expand...
Click to collapse
Yep. There is no plastic backing. You're thinking of another Otterbox case, perhaps the defender? Anyway, it fit sorta snug at first, but it loses its grip over time. I can see a gap between the case and the top of my phone (around the headphone jack. =(
mylasthope said:
Yep. There is no plastic backing. You're thinking of another Otterbox case, perhaps the defender? Anyway, it fit sorta snug at first, but it loses its grip over time. I can see a gap between the case and the top of my phone (around the headphone jack. =(
Click to expand...
Click to collapse
100% agree. Bought it, used it 1 day, never again.
_MetalHead_ said:
I have one, I am very unimpressed with it. It fits way too loosely to be usable for me. I put it one once when I first got it, and it's been collecting dust (a lot!) ever since.
Click to expand...
Click to collapse
Exactly what happened to me with the same case. Phone is swimming inside of this case. No bueno.
I wonder if the Otterbox Impact will fit an EVO with a 3500 mAh extended battery.
linhpham2 said:
I wonder if the Otterbox Impact will fit an EVO with a 3500 mAh extended battery.
Click to expand...
Click to collapse
I tried it on my 2600 mAh extended and it almost fit, but it kept coming off from the sides
Sent from my PC36100 using XDA Premium App
I have the otter box case, the one that come with the hard plastic that covers the silicone. I love it

I seriously have to vent about the design of this phone. UGH!

What in the hell was Samsung thinking when they made this thing so damn shiny and smooth? I drop it on a daily basis.
I tried a silicone case from eBay, the fit was GREAT but the things like a dang lint roller. EVERYTHING sticks to it. I pick up my phone and it's covered with hair and grit, dirt, sand, you name it.
I actually have to wash my silicone case off. I actually got sick of how much stuff it picks up, I stopped using it.
I ordered a Case-Mate case last week, hoping that works out better. Hopefully it shows up tomorrow before I just return it for an iPhone 4S, ugh, it's frustrating the hell out of me.
blame the phone on your parkinson's disease. makes sense.
Order a TPU case. Nothing is better. They have them on Amazon. Matte black looks amazing with this phone. The owner of TPU posts on XDA and is always listening to our feedback.
Hmm... haven't dropped the phone yet.
Try TPU next time, its amazing.
Haven't dropped mine yet. Maybe you should try sticky tape on your hands
How does a TPU case differ from a Silicone case as far as stuff sticking to it? I've never really had much luck with these rubber cases from that stand point. Stuff always sticks to them like crazy.
What is a TPU case made from? I guess if the Case-Mate doesn't work out, I can try that next.
That said, I think I actually looked at the TPU cases when first looking for a case. TPU Cases was sold out every time I looked so I ended up ordering this silicone rubber piece of crap I got from eBay.
kdoggy said:
How does a TPU case differ from a Silicone case as far as stuff sticking to it? I've never really had much luck with these rubber cases from that stand point. Stuff always sticks to them like crazy.
What is a TPU case made from?
Click to expand...
Click to collapse
Nothing sticks to it and it looks and fits nicely to the phone with not much thickness added
It's made of TPU. It's some longer scientific name.
http://www.amazon.com/TPU-Cases-Flexible-Samsung-Galaxy-Packaging/dp/B005MGUTW6
Mandado from my E4GT
kdoggy said:
How does a TPU case differ from a Silicone case as far as stuff sticking to it? I've never really had much luck with these rubber cases from that stand point. Stuff always sticks to them like crazy.
What is a TPU case made from? I guess if the Case-Mate doesn't work out, I can try that next.
That said, I think I actually looked at the TPU cases when first looking for a case. TPU Cases was sold out every time I looked so I ended up ordering this silicone rubber piece of crap I got from eBay.
Click to expand...
Click to collapse
fits tightly with protection to the phone good fit and you wont turn back not a lint trap at all bro check it out
http://tpu-cases.com/
I agree this phone is way too susceptible to being dropped
Sent from my SPH-D710 using xda premium
This phone is very slippery, partiularly the back panel. It's like it's made of Teflon or something.
I second the suggestion of a TPU case. Best case I've had, incredible customer service. I highly recommend one.
gtuansdiamm said:
I agree this phone is way too susceptible to being dropped
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
No, that's the Palm Pre.
riassan said:
fits tightly with protection to the phone good fit and you wont turn back not a lint trap at all bro check it out
http://tpu-cases.com/
Click to expand...
Click to collapse
Does that case scuff the outer edge of the phone? That was the one thing that bugged me about the OG Epic cases.
Sent from my SPH-D710 using xda premium
JohnCorleone said:
Does that case scuff the outer edge of the phone? That was the one thing that bugged me about the OG Epic cases.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Could be different for someone else, but I've had mine for 2 weeks and I have noticed some extra scuff marks. Since the upper rim of the case where the phone enters is made of a slightly harder TPU material, constantly removing the phone from the case will cause this to happen. I do this to clean out any dust particles that may get through. If it wasn't for the case looking so good on the phone, I probably would've switched it out for that reason.
get a TPU case, not going to prevent drops but just trust sammy's build quality. Mine has already taken some spills and already came out ahead
How do you drop your phone so often that you blame the phone's design?
I did accidentally throw my phone, but that's because I forgot it was in my hand, lol.
Go with the TPU case. I picked up the matte black one off of amazon myself as a temp solution until I splurged on a casemate or something more "heavy duty" and otterbox like.
I actually decided to just rock the TPU case.. it's niiiiice.
I also have a vid review up on amazon for it as well.
btate0121 said:
Go with the TPU case. I picked up the matte black one off of amazon myself as a temp solution until I splurged on a casemate or something more "heavy duty" and otterbox like.
I actually decided to just rock the TPU case.. it's niiiiice.
I also have a vid review up on amazon for it as well.
Click to expand...
Click to collapse
Where's the link to your video?
Sent from my SPH-D710 using xda premium
JohnCorleone said:
Where's the link to your video?
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Right here
http://www.amazon.com/review/R11P8B3A6E5T4H?ie=UTF8&videoPreplay=1
I was just about to post it. Thanks much!

SGP Neo hybrid for SGS3 coming soon!!!

http://www.spigen.com/blog/galaxy-s3-neo-hybrid-case-is-coming-soon/
i'm really excited. and they will use TPU instead of silicone and polycarbonate frame. amazing!!!!
kyan~ said:
http://www.spigen.com/blog/galaxy-s3-neo-hybrid-case-is-coming-soon/
i'm really excited. and they will use TPU instead of silicone and polycarbonate frame. amazing!!!!
Click to expand...
Click to collapse
Nice find. I will looking out for this.
Sent from my SCH-I535 using xda premium
This case looks excellent. I'll be keeping watch on their blog from here on out to see when I can pre-order.
I had one on my s2. First week it was fantastic..
After that, garbage. The lining portion they provide stretches and causes a gap in between the back of the phone and the lining. Got pretty annoyed with it and threw it away.
gaveup said:
I had one on my s2. First week it was fantastic..
After that, garbage. The lining portion they provide stretches and causes a gap in between the back of the phone and the lining. Got pretty annoyed with it and threw it away.
Click to expand...
Click to collapse
They have updated it.
So what's different? In previous versions a silicone cover was used. However, we've updated the series is a new TPU material. This new material is still as soft and dust-resistant, but with added durability and protection. Perhaps the best update on the new Neo Hybrid for the Galaxy S3 is that there is absolutely NO sagging or expanding of the TPU cover due to heat from device.Great news to all Neo Hybrid fans out there!
Click to expand...
Click to collapse
Wond3r said:
They have updated it.
Click to expand...
Click to collapse
It ses the harder material sits on the phone, while the softer TPU material is on the outside. Seems like that is scratches just waiting to happen. Now reverse that so that TPU inside, hard shell outside, and add an optional belt clip and I'll take 2!!!
OnceAMatrixMan said:
It ses the harder material sits on the phone, while the softer TPU material is on the outside. Seems like that is scratches just waiting to happen. Now reverse that so that TPU inside, hard shell outside, and add an optional belt clip and I'll take 2!!!
Click to expand...
Click to collapse
Did you read the website?
The Galaxy S3 Neo Hybrid Case Series will be the same dual concept as the Galaxy S2 and iPhone. The case features a TPU cover with a hard polycarbonate frame. The TPU material protects the phone by absorbing shock from any accidental drops. The hard plastic frame protect the phone from scratches and scuffs. Having both the advantages of a hard and soft case makes the Neo Hybrid an all-around protective solution.
Click to expand...
Click to collapse
The frame (outside) is PC (hard). The cover, TPU, absorbs the shock.
Your phone wont be getting scratches with this case.
Bummer... the TPU is blue only the border of the hard case is white.
I've never clicked on their blog, and but they have really good stuff. Nano Clear Giveaway?? eek!
Wond3r said:
Did you read the website?
The frame (outside) is PC (hard). The cover, TPU, absorbs the shock.
Your phone wont be getting scratches with this case.
Click to expand...
Click to collapse
I did, but not carefully enough I guess. The 'TPU cover' is what threw me. Thanks
Nice
Sent from my SAMSUNG-SGH-I747 using xda premium
Isn't it already on sale?
twoashj said:
Isn't it already on sale?
Click to expand...
Click to collapse
Yep, looks like you can preorder now (only two color options though :/)
http://www.spigen.com/cell-phone/sa...g-galaxy-s3-case-neo-hybrid-color-series.html
I will wait for amazon 2 day free shipping
Sent from my SGH-I747M using xda premium
I'm really liking the look of this case. I just wish they had different color options for the backs. It says they're interchangeable for different looks. Well how can I get a different look if all the backs are the same?
Sent from my SPH-D700 using Tapatalk 2
Has anyone had this case on the Nexus or other phone? Are they high-quality cases? (They appear to be pretty darn good.)
I like how there still appears to be lots of room around the home button for my fat thumb! Many other cases seem to have a lower lip that protrudes close to the home button...
Thanks!
nthngtlse said:
Has anyone had this case on the Nexus or other phone? Are they high-quality cases? (They appear to be pretty darn good.)
I like how there still appears to be lots of room around the home button for my fat thumb! Many other cases seem to have a lower lip that protrudes close to the home button...
Thanks!
Click to expand...
Click to collapse
I had it on the gnex and loved it. I think this one is using a different material than the gnex neo hybrid but SPG never puts out crap.
Sent from my SPH-L710 using xda premium
has anyone gotten theirs yet? post a review!!
Got mine today
just got mine in the mail today the case looks and feels great!!! one problem though seems like the case fits to tight it keeps shutting the phone off and adjusting the volume. I dont have a zagg or best skins ever on it to add bulk.
azelaya said:
just got mine in the mail today the case looks and feels great!!! one problem though seems like the case fits to tight it keeps shutting the phone off and adjusting the volume. I dont have a zagg or best skins ever on it to add bulk.
Click to expand...
Click to collapse
Same problem here.
Sent from my GT-I9300 using xda app-developers app

The thinest case with a lip for protecting the screen?

Hey everyone I recently bought the otterbox commuter case for my N-7000, don't get me wrong it is a nice case but just a little to big for my hands. It made the phone just a bit to wide to operate and also added too much weight.
Now back to my original question, I know there are light cases that would protect the back and sides of the phone in a fall, what I wanted to know was, is there a slim case that would also offer some protection for the front of the phone as well i.e. a lip or buffer for the screen area as the otterbox does. It does not have to be a big lip like that, but some protection would be nice, I'm not the one to be careless with my gadgets, but as they say...**** happes.
I keep breaking my belt clip cases, since I wear on the left side, when I get into a car, the case sometimes catches on the seat.
I bought another cheap case, just for the back/screen protection, tossed the clip in the drawer.
This one was less than Five dollars (U.S.) http://www.amazon.com/gp/product/B007L7PEAG/ref=oh_details_o01_s00_i00
Then, I bought this one, horizontal fake leather case to keep it in.
http://www.amazon.com/gp/product/B007QBUC9K/ref=oh_details_o00_s00_i00
Spent less for this 1,2 combination than I did for my now broken otterbox.
amd-dude said:
Hey everyone I recently bought the otterbox commuter case for my N-7000, don't get me wrong it is a nice case but just a little to big for my hands. It made the phone just a bit to wide to operate and also added too much weight.
Now back to my original question, I know there are light cases that would protect the back and sides of the phone in a fall, what I wanted to know was, is there a slim case that would also offer some protection for the front of the phone as well i.e. a lip or buffer for the screen area as the otterbox does. It does not have to be a big lip like that, but some protection would be nice, I'm not the one to be careless with my gadgets, but as they say...**** happes.
Click to expand...
Click to collapse
Thanks but after all night of searching around I think I found one:
http://www.amazon.com/BoxWave-Samsu...rsions/dp/B000H13M2K/ref=cm_cr_pr_product_top
I saw the review for it and it does seem to offer good protection and is yes slim enough to not add too much bulk to the phone
Is that not just the same as these cases on ebay for about $3?
http://item.mobileweb.ebay.co.uk/viewitem?itemId=290759186357&index=4&nav=SEARCH&nid=25950730099
Sent from my GT-N7000 using xda premium
verbkpf82 said:
Is that not just the same as these cases on ebay for about $3?
http://item.mobileweb.ebay.co.uk/viewitem?itemId=290759186357&index=4&nav=SEARCH&nid=25950730099
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Get the rinke slim it has a lip
verbkpf82 said:
Is that not just the same as these cases on ebay for about $3?
http://item.mobileweb.ebay.co.uk/viewitem?itemId=290759186357&index=4&nav=SEARCH&nid=25950730099
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
No they are just cheap plastic. The other is tpu plus hard plastic. Ive one with a kick stand from Amazon. Always use them
From box 13......

Warning to anyone using the Ringke Slim case...

I'm sure people have probably mentioned this already but I just wanted to show you guys what the sharp edges on the case can do to your phone after removing the case. Very disappointed with Rearth, never had this issue with the N4 slim case and it was much easier to remove as well.
That looks awful! ;(
Sent from my Nexus 5 using xda app-developers app
Yup, that case scratched the corner of my N5 as well (not as bad as yours though). I have requested a refund on Amazon and shipping it back to them.
Spigen ultra fit does more scratches ure lucky
Sent from **Nexus 5 signal sucks**
Raistlin1 said:
Yup, that case scratched the corner of my N5 as well (not as bad as yours though). I have requested a refund on Amazon and shipping it back to them.
Click to expand...
Click to collapse
You should be able to request a refund without having to ship the case back. Just tell them that this case is unusable/defective, which it is honestly. I also left a review on Amazon with the picture to warn people as well.
What made this even more painful though is I waited 3 weeks for this case to arrive (I'm in Canada so not sure if it was a customs thing) and I did just fine without any protection
Gah! I have this case... I guess i'll try never to take it off... Can you recommend some alternative cases if I ever do have to hide a scar like that?
A soft tpu
Sent from **Nexus 5 signal sucks**
Wow, this sucks. I have N5 Ringke Slim case (haven't put it on a phone yet) but the edges doesn't seem to be that sharp.
The key is to bend the case while taking it off and on.
I've done over a dozen times without issue.
Sent from my Nexus 5 using Tapatalk
av3n said:
I'm sure people have probably mentioned this already but I just wanted to show you guys what the sharp edges on the case can do to your phone after removing the case. Very disappointed with Rearth, never had this issue with the N4 slim case and it was much easier to remove as well.
Click to expand...
Click to collapse
Wow! A case did that?
Hey, I've got the same pajamas.
samizad said:
Wow! A case did that?
Hey, I've got the same pajamas.
Click to expand...
Click to collapse
lmao.
All rigid cases can cause this. Gaps in between the phone and the case cause abrasion and will wear off the urethane soft touch finish. Go for a TPU or silicon case or cover your phone with a skin to prevent this.
The case will also pull your back plate off as well. I stopped using it after that. I am lucky I don't have any scratches.
samizad said:
Hey, I've got the same pajamas.
Click to expand...
Click to collapse
Nice. They're damn comfy
Kinda glad that my case and screen protector never arrived, been over a month now, refund demanded!
is it only on the edges? if so ill just place a small piece of tape on my phone on the edges to protect it
I've had the rearth slim since it launched and have zero scratches on my phone. Not saying that this case won't scratch but I've taken it off and put it on several times without issue. It fits so snug and feels almost identical to the back of the N5 I love it. Adds quite a bit of additional grip as well
Sent from my Nexus 7 using XDA Premium 4 mobile app
I had that case on my galaxy Nexus and when I finally took it off to sell the phone it had scratched the **** out of the back/bottom of the phone.
Never buying one again...
Sent from my Nexus 5 using Tapatalk
Get the Diztronic, have it for my N5 and had it for my N4, never a single problem and I dropped my N4 a few times even face down and it never had any damage with the Diztronic on it.
This is my greatest fear from hard cases. I only buy rubberized or tpu cases encased in a hard case.

Categories

Resources