hi all just tried to update my cer iconia a700 with cyanogenmod cm 10.1 anyways download it to tablet installed clockwork recovery as well as downloading gapps clicke on mod file and it opened clockwork and i clicked install to install mod/update and now just boots to cyanogenmod on load screen and just sits ther for hours like its loading but nothing happening how to i get back to old rom or even carry on with update i was on 4.1 jb tried to update to 4.2 and yes its rooted sry i am a noob to this thanks in advance
Hello smedzz.
Your device only has experimental and nightlies for Cyanogenmod, with no RC or stable ROMs available. The problem you are experiencing sounds a lot like the problem I had with Cyanogenmod 9.0 for my Samsung Galaxy S i9000. It was a release Candidate (RC), and slightly unstable, and hung up on the boot graphic occasionally. The only way to fix it was to flash the phone again (my experience).
If that sounds like a pain, you could look for a different ROM in the Developer section of the forums for the a700. The "iconiaN 2.6" ROM, based on Jelly Bean 4.1.1, sounds good. At least it would get your tablet working again.
http://forum.xda-developers.com/showthread.php?t=1952124
Already solved?
Did you wipe?
Related
Hey, I recently installed the PACman v20.1.0 ROM (4.2.2) and everything's working fine except the bottom of my screen is unresponsive. No matter how much you touch is it doesn't work. The unresponsive space is the bottom half of the icon row on the homescreen dock, the top of the icon is still responsive. Can someone help me out here? (sorry if this is a noob question or mistake ) Thanks!
bramsubhag said:
Hey, I recently installed the PACman v20.1.0 ROM (4.2.2) and everything's working fine except the bottom of my screen is unresponsive. No matter how much you touch is it doesn't work. The unresponsive space is the bottom half of the icon row on the homescreen dock, the top of the icon is still responsive. Can someone help me out here? (sorry if this is a noob question or mistake ) Thanks!
Click to expand...
Click to collapse
Change the trigger area and make it to small...if you change it to none the screen would flicker.
Settings>toolbar>trigger area>small
Or
Toolbar>pie gravity>left/right/whatever you want
I just change the trigger area to small and it helps. No pie for me though
zxstyle07 said:
Change the trigger area and make it to small...if you change it to none the screen would flicker.
Settings>toolbar>trigger area>small
Or
Toolbar>pie gravity>left/right/whatever you want
I just change the trigger area to small and it helps. No pie for me though
Click to expand...
Click to collapse
It worked! Thanks so much :good:
pacman rom flash problem!!!!
I need some help here!!! I'm getting real frustrated trying to flash this pacman ROM....I keep getting stuck on the booting logo it just won't go through the logo...I guess its boot looped...I did everything right on installing it right...wipe/factory reset,flash ROM,flash gapps,reboot...even tried wiping/factory reset,wipe cache,install ROM,install gapps,wipe davlik,fix permissions n reboot...I even tried format system....I don't know what to do now...I have no problem flashing mr1 build 6 AOKP ROM,and one before that was mr1 build 5 AOKP...and also before that I had the cm10 ROM....can somebody help me out here...I really want to check this ROM out....do I need to update my CMW recovery cause I'm working with 5.0.2.6.....or do I need to flash it from my sdcard instead of my internal sdcard cause that's were I flashed the rest of my ROMs....I got the AOKP mr1 build 6 ROM now but like I said I really want to check out pacman ROM...somebody help if somebody can????
i posted in the other thread you had posted but yes do yourself a favor and update your CWM to the latest via Rom manager and you wont have to use those scripts anymore when you do flash roms
steve/pacman rom issue
GOODNEWS!!!! I ACTUALLY UPDATED THE CMW RECOVERY TO TEAM WIN RECOVERY N IT WORKED FLASHING THE PACMAN ROM...I GYES CMW RECOVERY 5.0.2.6 DOESNT WORK WITH THAT ROM....THANKSFOR REPLYING BACK....I got one more question if you can help mw with it...do you
know of any kernels i can flash with the pacman rom for my tmobile galaxy s2...also is there any lockscreen mods too out there that will work with
pacman...i have some aokp lockscreen mods for the different colore but i am not sure it would work w pacman rom...thanks bro!!!
dose8888 said:
GOODNEWS!!!! I ACTUALLY UPDATED THE CMW RECOVERY TO TEAM WIN RECOVERY N IT WORKED FLASHING THE PACMAN ROM...I GYES CMW RECOVERY 5.0.2.6 DOESNT WORK WITH THAT ROM....THANKSFOR REPLYING BACK....I got one more question if you can help mw with it...do you
know of any kernels i can flash with the pacman rom for my tmobile galaxy s2...also is there any lockscreen mods too out there that will work with
pacman...i have some aokp lockscreen mods for the different colore but i am not sure it would work w pacman rom...thanks bro!!!
Click to expand...
Click to collapse
I'd recommend the cerux kernel. I havent played with the lock screen on the 22.0.01 update yet, so i cant give you an answer on that. But make sure you do a backup before you try any mods, so you can always go back if you accidently messed it up.
Hi there!
Do anyone know if ROMs cooked for Ace II would work on Ace IIx (GT-s7560M) and, in consequence, on Galaxy Trend (GT-s7560)?
I'm asking because due to the low popularity od Trend, I can choose from stock TouchWiz ICS and this http://forum.xda-developers.com/showthread.php?t=2292696, which is also ICS and that doesn't satisfy me. As I can see, there are lots of JB ROMs for Ace II, hence the question.
Thank you for your answers
No. I see cm10.1(or 10.2, whatever) for ace 2x, thats android 4.2(jb) why not use that
Sent from my GT-I8160 using Tapatalk
Unfortunately, it's not that easy. You could attempt to port a ROM from the Ace 2, but it wouldn't be bugfree. Getting it booted would be a feat. Like the previous commentor said, there is a CM10.2 and CM11 (JB and KK ROMs) ROM for the Ace II X, though it isn't completely bug free. You could also try my Mod Pack (link in my sig) for the stock ICS ROM. The next update will include some AOSP ICS themed visuals, so it'll make stock ROM feel more AOSP and less Samsung-y.
Well, I haven't noticed at first, there's even 4.3 ROM cooked for Ace IIx ( http://forum.xda-developers.com/showthread.php?t=2518416&highlight=ace+iix ), thanks for hints.
I'll try to set it up and running later today and confirm if it does the trick on Trend.
Brachacz said:
Well, I haven't noticed at first, there's even 4.3 ROM cooked for Ace IIx ( http://forum.xda-developers.com/showthread.php?t=2518416&highlight=ace+iix ), thanks for hints.
I'll try to set it up and running later today and confirm if it does the trick on Trend.
Click to expand...
Click to collapse
AFAIK, YoshiShaPow's Slimbean doesn't work. Bootloops. If you want a good ROM (and pretty much the only real custom ROM), try SeannyM's CM builds. There's 10.2 and 11 (Android 4.3 Jellybean and 4.4 Kitkat). All the source built ROMs for the Ace II X are currently buggy. There in his signature here. They'll definitely work with the Trend, but I'm not sure about RIL compatibility with the Trend. If it doesn't work, you can try flashing the Ace II X 'MG2 firmware from Sammobile with Odin, then installing CM.
For future seekers:
Well, after hours of flashing, wiping and testing, it's CM 10.2 ported by SeannyM which appears the best ROM for Galaxy Trend (originally meant for Ace IIx), CM11 has less features, ART doesn't work like it should and it's too buggy tu use so far. 10.2 has a couple of bugs but it's definitely usable as a daily driver. The most gear-grinding bugs are:
WiFi (either you have it turned on all the time or after turning it off you have to turn it on back again and reboot your device, otherwise it won't connect to any network saying 'authentication problem occurred'. That can also be a RIL issue with my device, as you've stated above),
Bluetooth, which simply doesn't work yet
Camera - you can just download any other camera app from play or whatever.
Some may also consider message which shows up after entering PIN ("a SIM card has been detected; reboot your device to install it" or something like that) a problem. You just bypass it by pressing 'back' button and everything's fine.
I use it with JB gapps and 1208MHz kernel, both also got to work by SeannyM, he has links to download all of them goodies in his signature.
Thanks for all the hints
I recently bought an Ace IIx, I quickly found out that it is different from the Ace II and there are less custom rom available. I would flash CM10.2 but I need bluetooth in my car, so I can't use CM10.2 until bluetooth is fixed.
For now, I'm running Daver's MG2 deodexed stock rom and I added a few tweaks (patched services.jar, installed busybox and enabled init.d support). Now, I would like to know if there are some init.d scripts available to improve performance?
Hello.
I have a Galaxy trend s7560
Root is working and cwm 5.x
Also. I flashed cm11 Android 4.4
On it from the Ace 2x.
This is working fine.
Greets from holland.
I have a rooted n5110 4.2.2 note 8.0
first of all I'm not a noob. However I have been spoiled. Up till nowi have had Motorola decices that have great apps like rom manager and team black hat leaks to help you decide what roms to flash.
I'm at a loss when it comes to all the options in this forum. I see some roms based on 4.2.2; 4.3 and isn't CM 11.0 based on 4.4? If I flash a 4.3 rom and dont like it cani flash a 4.2 rom or restore a backup to get 4.2.2 back? That was a big no no wirh moto devices. Once you upgraded you had to stay less you got a hold of the spf file.
Ive looked into both PAC rom and CM rom: the stable and nightly versions of both. I know nightlies may be unstable so I would stay away from them less it is easy to flash back to a 4.2.2 stable release. And downloaded the right gapps package. Why cant developers just included that in the roms?
So a bit of help please. What are the differences between the 4.2.2; 4.3 and is CM 11 based on 4.0?
I also use twrp as a recovery but have used cwm in the past. I habe both onmy sdcard in case of trouble.
any help or advice would be appreciated.
Thanks
Come on....anybody?
Sent from my GT-N5110 using xda app-developers app
Sorry if this has been asked many times in the past, but I cannot find anyone asking recently...
My girlfriend has the official jellybean 4.1.2 installed on her UK Ace 2 GT-i8160, but it often freezes up or lags when doing simple tasks... she was thinking of getting me to downgrade it back to gingerbread, but I wondered if getting one of the kitkat roms would be better?
The requirements are simple.... the most stable and reliable kitkat rom for a UK Ace 2 GT-i8160.
I've been reading and searching the forums for the last couple hours... but I just keep getting more and more confused.
Can anyone help?
EDIT/UPDATE:
CM11 looks like it's the most worked on mod, but I'm confused as to why there are so many 'stable' and 'fully working' releases, when the next update lists a few fixes... so it obviously wasn't 'fully working'? :S
Is the last version of 4.4.3 more stable than the latest 4.4.4? or perhaps a lower version than that?
Or perhaps CM10.2 would be better? - as I stated above, I just want the phone to be as stable and reliable as possible... the official jellybean rom is a joke, and gingerbread wasn't much better.
No replies, but ok...
I've spent about 10 hours reading threads about different roms, but it would have been nice if someone could have pointed me in the right direction to save some of that time. If anyone else is wanting the most stable custom ROM for their Ace 2, go for 4.3.1 TeamCanjica CyanogenMod 10.2.
I've just installed it and it works like a dream so far... like getting a brand new phone
Doesn't even need to be rooted, very simple to install through the standard recovery menu.
Andaho said:
No replies, but ok...
I've spent about 10 hours reading threads about different roms, but it would have been nice if someone could have pointed me in the right direction to save some of that time. If anyone else is wanting the most stable custom ROM for their Ace 2, go for 4.3.1 TeamCanjica CyanogenMod 10.2.
I've just installed it and it works like a dream so far... like getting a brand new phone
Doesn't even need to be rooted, very simple to install through the standard recovery menu.
Click to expand...
Click to collapse
thanks,will try out as i also faced the same issues after upgraded to jellybean.:good:
Most stable KitKat ROM for Ace 2 is AOSP ROM. No Custom ROM can beat its stability....
Sent from my GT-I8160 using Tapatalk
Hello everyone,
I'm posting on here because I can't find any solution to my dilemma which I am sure that other people in the AOSPA legacy community have also experienced. I have been using Paranoid Android on my T989 since the 4.4.3 update and I have regularly updated my roms since then. Somehow ever since I updated my phone to 4.5 beta 3, something prevents me from being able to hear or be heard during regular phone calls around an hour after I restart my phone.
I have tried everything to try to make my phone back to normal, I have updated my versions of AOSPA, I have downgraded to stable versions, I have gone to a debloated stock rom (which worked perfectly fine but who likes touchwiz android 4.1.2?) and back to AOSPA, I tried the latest Carbon nightly rom and the problem persisted, I have wiped my internal memory, cache, davlik, etc. multiple times. I am at a total loss as to what I should do to fix this issue. I'm currently running it on 4.6 beta 1 and I still have the issue.
I really love my GS2 and I don't want to part with it or have it running stock. Please help me.
I really appreciate it,
Chris
I've had the same issue , I was running the latest liquid smooth rom . I just flashed back to stock using Odin and all is fine on the stock rom . I just rooted again and am hesitant to install another kitkat rom for fear of this calling issue ........ Anyone else with this problem ?
Playnhooky said:
I've had the same issue , I was running the latest liquid smooth rom . I just flashed back to stock using Odin and all is fine on the stock rom . I just rooted again and am hesitant to install another kitkat rom for fear of this calling issue ........ Anyone else with this problem ?
Click to expand...
Click to collapse
I am also getting this problem on Slim 7.8....must be an audio-caf issue....Can someone go back to an old KK rom (one from earlier months) and see if they experience the same issue? Preferably cyanogenmod
I flashed to stock rom via oden and spent the weekend with the phone and all was good , I flashed to the latest cm-11 with no addons , stock cm-11 kernal and after an hour or so I lost call audio again . We must have done something to the phone in a previous rom cause not many people are having this issue . Now I have flashed about 75 different roms with no issue , I hope someone finds the problem cause I'm not to keen on the stock rom !
I've seen posted that snapchat was the cause of the no call audio problem we are having , I flashed the latest liquid smooth rom last night , download all my apps that I usually do except snapchat and I've had no issues with the calling bug . All is working great .